Used Ridinger Gmbh Floating Dredger for sale (69,391)

Condition: used, functionality: limited functionality, Year of construction: 1967,  Year of manufacture: 1967 Isdpfx Adeykqg Uekotg  Manufacturer: RIDINGER GmbH, Mannheim  Contact: Krunoslav Alduk  Price: best offer

Condition: good (used), functionality: fully functional, Year of construction: 1998, machine/vehicle number: 964, Equipment: type plate available, Floating chain excavator, bucket type for gravel extraction. Isdpfevnr R Esx Adketg Location - 48-200 Trzebina.

Condition: refurbished (used), functionality: fully functional, gearing type: mechanical, Year of construction: 2001, operating hours: 21,000 h, Float dredger for sale. Useful production depth from until 16 meters. The bucket conveyor consists of 46 members, it brings up about 3 m3 of material in a single rotation. The machine has a capacity of approx. 90-120 t/h depending on the depth. Itsdevv Nwxepfx Adksg The length of the basic machine is 20 m, to which 4 pieces of 20 m floating conveyors with 650mm belt width and a 30 m discharge conveyor are connected together with the associated power cable. The floating dredger was completely renovated 4 years ago. The drive of the bucket conveyor has recently been modernized with a frequency converter for torque and speed control. The machine can be seen in operation near Letenye. As an option, a 400 kVA diesel aggregate is available for the machine, which allows the machine to be operated independently of the electrical network.

Condition: new, Power that transcends tough terrains: Galen Group's dragline buckets effortlessly handle the heaviest loads with durability and engineering excellence! Please contact us for inquiries. Itodpfxsvzhb Te Adkeg

Condition: used, Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Ijdoy S Rw Dopfx Adkjtg Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: refurbished (used), Year of construction: 2019, operating hours: 3,000 h, functionality: fully functional, pressing force: 70 t, year of last overhaul: 2025, Technical data packing press / can press / metal sheet press: Manufacturer unoTech GmbH Type UPAXX 70 Year of manufacture 2019 Operating hours approx. 3,000 hours Pressing force 700 kN at 315 bar Filling opening chute 420 x 1,250 mm (d x w) Channel cross-section (package dimension) 350 x 500 mm (h x w), length depending on material Drive power 30 kW Connected load 40 kW Power consumption, total 70 A Throughput capacity for empty beverage cans with: one pressing stroke approx. 1.7 t/hour two pressing strokes approx. 2.5 t/hour Achieved compaction approx. 1200 kg/m³ Hydraulic oil tank capacity 850 l Press dimensions built up 8,000 x 1,600 x 2,500 mm (l x w x h) Transport weight press approx. 9.5 t Accessories: Oil cooler 1.5 kW, oil tank heater 1.5 kW, press box made of wear-resistant steel S355 Material properties: According to the manufacturer, this machine is suitable for pressing tin cans, metal sheet offcuts, sheet steel as well as aliminium, brass and copper waste. Condition of the baler: The packing press has been fully overhauled in our workshop. The press is in very good condition; please see the demonstration video following the overhaul. The machine sustained transport damage whilst being moved. The control cabinet was damaged and slightly dented by a forklift truck, and the main switch (on/off switch) was damaged. These damages are reflected in the significantly reduced sale price and must be repaired by the buyer at their own expense. Itedpfx Adoy S Rv Tjkeg Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), mileage: 148,321 km, power: 184 kW (250.17 HP), first registration: 10/2023, fuel type: diesel, axle configuration: 4x2, wheelbase: 5,550 mm, fuel: diesel, fuel tank capacity: 300 l, driver cabin: day cab, gearing type: automatic, number of gears: 6, emission class: euro6, total length: 10,000 mm, total width: 2,550 mm, total height: 3,750 mm, permissible axle load (axle 1): 4,480 kg, permissible axle load (axle 2): 8,480 kg, loading space length: 8,200 mm, loading space width: 2,480 mm, loading space height: 2,600 mm, Year of construction: 2023, Equipment: AdBlue, Technical Information Number of cylinders: 6 Engine displacement: 6,871 cc Maximum front axle load: 4,480 kg Maximum rear axle load: 8,480 kg Weights Unladen weight: 6,920 kg Payload: 5,070 kg Gross vehicle weight (GVW): 11,990 kg Functional Loading platform height: 300 cm Maintenance, History and Condition APK (General Technical Inspection): valid until 01/2027 Technical condition: good Visual condition: good Itedpfx Aey Szlfedkeg Further Information Please contact Martin Vos Vos, Martin Martin Vos, or Martin Vos for more information. = Company Information =

Year of construction: 2014, condition: used, Industrial water treatment and distillation system for the treatment of industrial wastewater and process water, with integrated control, collection tanks, and a new pump following a recent inspection. Manufacturer: H2O GmbH Model: VACUDEST XS-XL Machine type: Industrial water treatment system Year of manufacture: approx. 2014 Itodpfx Adey S Rr Ujkjg Operating manual available Control with touchscreen HMI USB port available Ethernet port available Serial interface available Industrial PC control New pump installed Inspection recently carried out Collection tank for industrial wastewater available Collection tank for distillate available Tank material: PP gray Medium: Industrial wastewater Medium: Distillate Medium: Acidic and alkaline aqueous solution Tank volume, industrial wastewater: approx. 10,280 liters Tank volume, distillate: approx. 10,732 liters Tank volume, VacuCIP tank: approx. 1,306 liters Permissible operating temperature, tanks: 40 °C Permissible operating temperature, VacuCIP tank: 80 °C Specific weight, tanks: 10.00 kN/m³ Specific weight, VacuCIP tank: 11.00 kN/m³ Permissible operating pressure: 0.00 bar VacuCIP alkaline 1.26 pH value: >12 Concentration: 1:10 Closed industrial design Pipeline and tank system made of stainless steel and plastic.

Condition: new, functionality: fully functional, power: 4.8 kW (6.53 HP), fuel type: gasoline, overall weight: 550 kg, maximum load weight: 500 kg, lifting height: 1,020 mm, chain condition: 100 %, Year of construction: 2025, Equipment: hydraulics, rubber tracks, tilting carriage, Mini Track Dumper HT500Y-4 Compact professional dumper with lifting function – now with a 10% promotional discount The Mini Track Dumper HT500Y-4 is the ideal solution for construction, gardening and landscaping, agriculture, and work in confined spaces. Thanks to its rubber tracks, hydraulic tipping mechanism, and powerful lifting function, the dumper is extremely off-road capable, stable, and easy to operate. The machine impresses with its compact design, high load capacity, and a reliable Briggs & Stratton gasoline engine. 🔥 PROMOTION: 10% DISCOUNT ON ALL TRACK DUMPERS Take advantage of our current sales promotion: 10% discount on all track dumper models – for a limited time only, while supplies last! The HT500Y-4 is ready for immediate use and offers a powerful combination of performance, maneuverability, and ease of operation. ⚙️ Technical Data Engine & Drive Engine: Briggs & Stratton Engine Type: 1-cylinder, OHV, 4-stroke, air-cooled Displacement: 203 cc Power: 6.5 HP at 3600 rpm Fuel: Gasoline Fuel Tank Capacity: 3.6 liters Performance & Capacity Maximum Payload: 500 kg Weight: 550 kg Skip Volume: 200 dm³ Tilting Angle: 100° Tilting System: Hydraulic Dimensions Machine Dimensions without Pedal & Skip: 1570 × 880 × 1450 mm Machine Dimensions with Foot Pedal & Skip: 2050 × 880 × 1450 mm Skip Dimensions: 1050 × 730 × 730 mm Track Width: 700 mm Lifting & Height Maximum Lifting Height: 1020 mm Maximum Tipping Height: 970 mm Tipping Distance: 220 mm Ground Clearance: 110 mm Iodpoyqxw Iefx Adkotg Undercarriage Track Width: 180 mm Track Contact Area: 1000 mm Track Gauge: 520 mm Turning Radius: 1150 mm Speed: 2.88 km/h Climbing Ability: 20° Rubber Tracks for Optimal Ground Grip ✅ Features & Benefits ✔ Removable protective container ✔ Simple control via operating lever ✔ Foldable standing platform for flexible work ✔ Very compact – ideal for tight construction sites ✔ High stability thanks to track undercarriage ✔ Low-maintenance gasoline engine ✔ Hydraulic tilting function ✔ Powerful lifting function for comfortable unloading Application Areas Construction & Renovation Gardening and Landscaping Agriculture Barn & Farm Work Material Transport on Difficult Terrain Work in Confined Spaces Condition & Delivery Available immediately New / unused, from current production Factory-tested, ready for immediate use Europe-wide delivery via freight forwarder possible 💶 SECURE PRICE ADVANTAGE Net list price: €3,800 Promotional price with 10% discount: €3,420 net plus VAT Save now – better price possible! Benefit from our attractive promotions. An inquiry is worthwhile! Location: Rheda-Wiedenbrück Inspection possible by appointment ➡️ Request now and secure a 10% promotional discount on track dumpers!

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 1,064 mm, input voltage: 230 V, type of input current: AC, laser power: 30 W, type of cooling: air, total width: 800 mm, total height: 2,000 mm, total length: 900 mm, overall weight: 100 kg, warranty duration: 12 months, height adjustment type: electric, door opening width: 700 mm, door opening height: 400 mm, scan area length: 150 mm, scan area width: 150 mm, input current: 16 A, space requirement width: 800 mm, laser wavelength: 1,064 nm, working height: 900 mm, space requirement length: 900 mm, input frequency: 50 Hz, laser type: fiber laser, Equipment: fume extraction, The universal laser marking system LAS 28 XL from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fibre laser, you can mark almost all materials such as steel, hard metal, aluminium and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fibre laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realised with just a few clicks and without extensive programming knowledge. The software automatically counts up serial and article numbers after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Bk3ky883 The standard equipment includes a laptop incl. holder with Windows operating system and laser software. Optionally, the laser model LAS 28 XL can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realised. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - signal light for indication of operating status - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: outrigger for large components (one-sided, both-sided) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - max. component height approx. 300mm - electrically adjustable Z-axis - Laptop incl. holder with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): approx. 400mm - Connection 230V Itodpfeywg Sbox Adksg - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 140 kg, total length: 900 mm, total width: 800 mm, total height: 2,000 mm, input frequency: 50 Hz, laser power: 30 W, laser wavelength: 1,064 nm, scan area length: 150 mm, scan area width: 150 mm, type of cooling: air, type of input current: AC, laser type: fiber laser, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt Iodpoxuvk Eefx Adkstg - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: excellent (used), functionality: fully functional, Low-speed machine with gearbox Cutting width – 250 mm Motor power – 3 kW Rotor speed – 100 rpm Number of rotor blades – 20 pieces Number of stator blades – 2 pieces 8 units available, in perfect condition Isdpfx Adeyf I Tbskstg Capacity up to 50 kg/h Price: 1350 EUR per unit

Condition: new, Year of construction: 2026, functionality: fully functional, Complete module for supplying two two welding workstations with integrated integrated welding fume extraction system from Teka (welding fume extraction class W3, with automatic automatic filter cleaning) for steel. Mobile product. Small devices (Bosch, Makita or Milwaukee) can be attached to the holder (Fig. 4). Alternatively (for an extra charge), extraction systems from Nedermann, Kemper, Denios, Valco, Vaupel, Plymovent and other brands. Fully assembled including Itodpfx Asuud Iredksg 1 frame 2 AGA 2020 extension arms 1 tool cabinet 1 gas cylinder holder 2 power dispensers 2 compressed air dispensers The welding workstation is suitable for TIG, MIG and MAG welding equipment from the companies: Fronius, Clos, Rehm, Migomat, Esab, Lorsch, Ideal, Kemppi and many more! The welding table shown in picture 5&6 can be purchased separately! At the moment we have one returned knife and one used welding workstation (SAP) available. - We look forward to your inquiry!

Year of construction: 2006, operating hours: 5,840 h, condition: good (used), functionality: fully functional, machine/vehicle number: 6398921, Please state your offer price. Sale only within Europe, including Turkey. Technical data as per attached handout. The machine is offered without packaging; any warranty or guarantee rights are excluded. Should you wish to dismantle the equipment yourself, please indicate this clearly in your offer. Itedpfxjy Ta Alj Adkog We do not guarantee the accuracy of the technical data, the completeness of tools and accessories, or compliance with all safety and environmental protection requirements as stated in accident prevention regulations.

Condition: used, Slide belt magnetic conveyor, magnetic slide conveyor DGS System GmbH Z-conveyor, sliding belt conveyor, conveyor belt, magnetic belt conveyor Type no.: MBF 326P31,75 Com. no.: 44489-10 Year of construction 2017 Slide width 300 mm Distance between permanent magnets 250 mm Insertion length approx. 3400 mm (up to body box) Slide-in length approx. 3900 mm (without superstructure box) Slide-in height 210 mm Insertion width housing 370 mm Insertion width threaded mounts for adjustable feet 410 mm Insertion width at body box 470 mm Conveying height - discharge height approx. 1040 mm Itjdpsi Huzxefx Adkog Conveyor speed approx. 2 meters/min. Motor power belt drive 0.37 kW Mains connection 400 Volt, 50 Hz - Circulating chain equipped with permanent magnets Space requirement L x W x H 5200 x 700 x 1500 mm Weight 410 kg Very good condition

Condition: new, Year of construction: 2025, operating hours: 30 h, Panel benders (also known as swing bending machines or folding machines for sheet metal) are used across various industries where precise, automated bending of sheet metal components is required. The main sectors include: 🏭 Metalworking & Sheet Metal Processing Contract manufacturers / Sheet metal processing companies Series and single-part production Enclosures, housings, cassettes, boxes 🚗 Automotive Industry & Suppliers Structural and body components Itedjyb Hu Nepfx Adksg Brackets, covers, interior components Especially suited for mass production requiring consistent repeatability ⚡ Electrical Engineering & Electronics Switchgear and distributor manufacturing Enclosures for controls, servers, industrial electronics Very common use due to numerous 90° bends and complex contours ❄️ Household Appliances & White Goods Washing machines, refrigerators, ovens Internal frames, covers, claddings 🏗️ Construction Industry & Architecture Facade elements Roof and wall claddings Metal panels, cassettes 🚆 Transport & Public Transit Rail vehicles, buses, commercial vehicles Interior claddings, technical housings 🛠️ Mechanical & Plant Engineering Machine frames Protective claddings Switchgear enclosures 🌬️ HVAC / Air Conditioning Technology Ventilation ducts HVAC unit enclosures Air distribution systems 🏥 Medical Technology Equipment enclosures Stainless steel claddings High requirements for precision & surface finish Why Panel Benders in these sectors? ✔ High degree of automation ✔ Excellent repeat accuracy ✔ Ideal for complex bent parts ✔ Gentle processing of painted or coated sheets ✔ Fast processing for small to medium batch sizes

Condition: new, Year of construction: 2025, functionality: fully functional, operating hours: 30 h, ✅ 1. Metalworking companies with medium to high volumes 🔹 Series production / repeat parts If you produce many identical or similar parts, automation pays off as it reduces the cost per part and ensures consistent quality. 🔹 High production > 1,000 parts/month The higher the output, the faster the investment pays for itself through increased productivity. ✅ 2. Companies facing skilled labor shortages or high workloads 🔹 Difficulty finding or retaining qualified staff A robot can partially replace skilled operators and safeguard production capacity. 🔹 Night shifts / 24/5 production Robots can work longer and without fatigue → higher output without additional personnel. ✅ 3. Companies with complex bending processes or high quality requirements 🔹 Tight tolerances / minimizing errors A robot ensures consistent repeatability. 🔹 Complex downstream processes (e.g. handling, deburring, stacking) An integrated robot can take over tasks that would otherwise be performed manually. ✅ 4. Manufacturers facing tight deadlines or cost pressure Short delivery times required Automation reduces throughput times. 🔹 Cost pressure due to competition Longer machine utilization and lower unit costs improve competitiveness. ✅ 5. Future-oriented companies 🔹 Industry 4.0 / digitalization An automated press brake can often be integrated more effectively into IT/MES systems. 🔹 Scalable production Itjdpeyb I Azefx Adkeg If you plan to grow in the future, you have a flexible foundation.

Condition: new, Year of construction: 2026, functionality: fully functional, Equipment: CE marking, Entry-level model panel bender bending center For detailed information and a personalized quote, please send us your inquiry. We will process it as quickly as possible and get in touch with you. Itsdsy H Huhepfx Adksg

Condition: excellent (used), Year of construction: 2007, BA 600-2 CNC, Horizontal Milling and Drilling Center SW Schwäbische Werkzeugmaschinen GmbH Travel: X axis: 600 mm Y axis (changeover position): 600 (975) mm Z axis: 500 mm Control: Siemens 840D control, side-mounted Feed/Rapid traverse speeds: X, Y, Z: 1 – 45,000 mm/min Max. feed force X, Y, Z: 15,000 N Average acceleration: X, Y, Z: 2.5 m/s² Measuring system: Direct measuring system X, Y, Z Spindles: Iedpfey Swq Rjx Adkstg Spindle speed (infinitely variable): 20–10,000 rpm Torque: 2 x 363 Nm (S6/40% duty cycle) Power: 2 x 38 kW (S6/40% duty cycle) HSK-A 100, horizontal tandem arrangement Spindle distance: 600 mm Spindle bearing diameter: 100 mm Motor spindles, liquid-cooled, AC technology Working area: Swing carrier with spur gearing, max. workpiece weight 2,000 kg Swivel time 0/180 degrees approx. 6.0 sec 2 NC rotary tables, hydraulically clamped, max. workpiece weight 700 kg, table speed 25 rpm Partition between machining and loading area Tool magazine: 2 x 50 tools HSK-A 100 chain-type magazine Tool change time (chip-to-chip): 4.48 sec Max. tool diameter: 100 mm 250 mm with adjacent slot free Max. tool length: 420 mm Max. tool weight: 20 kg Equipment: Central lubrication Oil minimum quantity lubrication (spindle lubrication) Chip conveyor (hinged belt conveyor) Coolant purification with compact band filter Hydraulic unit Maintenance unit Water recooler Full enclosure, crane loading possible Dimensions: approx. 5.15 x 8.50 x 4.20 m Weight: approx. 20,000 kg Year of manufacture: 2007 Other features: Very good condition Setup parallel to main time Available from December 2023/January 2024

Condition: new, Year of construction: 2025, Plasma cutting machine for pipes and profiles Plasma cutting machine for cutting pipes and profiles. The cutting contour is defined and create by the software. The created CNC code can send to the machine via USB or network. The program can be easily choose via the 12"touch display. The automatic cutting process is started after manual insertion of the workpiece. Itjdpfx Adjgu Nmheksg - Tube length: max. 6000mm - for round tube up to OD = 150mm max - for square tube up to 101.6x101.6mm (4 "x4") max - maximum pipe weight 100KG per load - 4-jaw chuck - 1x automatic raw support - fully automatic cutting process - PC control with 12 "touch display - Data import via USB and network - Power consumption: 400V 3P 2KW - weight: 800KG Made in Germany The pictures show you an older machine

Condition: new, Year of construction: 2025, functionality: fully functional, Plasma cutting machine for pipes and profiles Plasma cutting machine for cutting pipes and profiles. The cutting contour is defined and create by the software. The created CNC code can send to the machine via USB or network. The program can be easily choose via the 12"touch display. The automatic cutting process is started after manual insertion of the workpiece. Itedpfxog Dvdcs Adkog - Tube length: max. 6000mm - for round tube up to OD = 150mm max - for square tube up to 101.6x101.6mm (4 "x4") max - maximum pipe weight 150KG per load - 4-jaw chuck - 1x automatic raw support - fully automatic cutting process - PC control with 12 "touch display - Data import via USB and network - Power consumption: 400V 3P 2KW - weight: 800KG Made in Germany The pictures show you an older bigger machine

Condition: like new (used), Year of construction: 2023, Mandrel Bending Machine S4501 ----- For the production of tube geometries with bending radii from 1.5xD → Maximum bending capacity, tube 42.4 x 3.25 mm (steel max. Re 240 N/mm²) → Maximum bending capacity, tube 30 x 30 x 3 mm → Maximum bending capacity, tube 42.4 x 2 mm (stainless steel 0.2 260 N/mm²) → Total connected load 3 kW → Tube loading length approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for the bending, feed, and rotation axes. The control system's touch display ensures easy and intuitive programming and operation. Once the tube is loaded, it is fixed in place by the chuck in the carriage, enabling precise tube positioning and the production of dimensionally accurate geometries. Standard features include tube geometry verification before the bending process: if the bending operation is initiated at an incorrect position, the machine will not grant approval, reliably preventing operator errors. Optional features offer greater convenience, increase output, and therefore improve the machine's efficiency. Data exchange with the optional TBS-3D tube calculation software (PC version) is performed via USB stick or network. Existing tube geometries can be imported into the software. Standard equipment: → Servo drive for bending axis, 1.5 kW Iedpetr U Hlefx Adkstg → Adjustable rotation speed → Left-hand bending direction → Bending angle resolution 0.1° → Maximum bending radius 120 mm → Bending shaft diameter 50 mm → Servo drive feed → Servo drive rotation → Three-jaw chuck for securing the tube in the carriage → Pneumatic tool retraction Hydraulics: → Hydraulic tube clamping with adjustable clamping pressure → Programmable early mandrel retraction PLC Control System: → 10" color touchscreen → ETH 10/100, X2X Link, 2x USB → Foot pedal operation → Data transfer via LAN network or USB → Material database Unique graphical programming: simple geometries can be calculated directly on the machine. After inputting length and angle, the control automatically calculates the feed values and bending angles. Power supply: 400V 16A Dimensions: L: 2.3 m x W: 1 m x H: 1.4 m Weight: approx. 1200 kg

Condition: used, Year of construction: 2017, pipe diameter (max.): 80 mm, mandrel length: 4,500 mm, Mandrel bending machine S8004 ----- For the production of dimensionally accurate pipe geometries with bending radii of up to 1.5XD → maximum bending performance pipe 76 x 4 mm (400 N/mm²) → maximum bending performance pipe 60 x 60 x 3 mm (400 N/mm²) → maximum bending performance pipe 76 x 2.9 mm (stainless steel) → total connected load 7 kW → pipe length 4.5 mtr Robust and durable steel construction in a force-locking connection - no construction susceptible to torsion due to, for example, the split construction of the bending head and mandrel carrier. Maintenance-free electromechanical drive of the bending axis. The touch display of the control enables simple and intuitive programming and use of the system. After the pipe has been pushed on, it is fixed in the carriage by the chuck. This enables the pipe to be positioned precisely and thus the creation of dimensionally accurate geometries. The standard also includes checking the pipe geometry before the bending process: If the bending process is started in the wrong position, the machine does not give permission for this. This prevents incorrect operation. Optional additional features provide more convenience and increase the output and thus the efficiency of the system. Data is exchanged from the optional pipe calculation program TBS-3D (PC version) via USB stick or via FTP access from the computer to the machine control system. USB or LAN connectors (RJ45) are available as standard. Existing pipe geometries can be converted quickly and easily, for example, using the STEP format. Standard equipment: → Electromechanical drive of the bending axis 4 kW → Speed 2.9 rpm (=17°/sec.) → Bending direction left → Bending angle resolution 0.1° → Max. bending radius 200 mm → Bending shaft diameter 50 mm → Electronic length measurement ±0.1mm → Electronic twist measurement ±0.1° → Manual stop system (overtravel stops in length) → Manual locking system (15° in twist) → Three-jaw chuck for locking the pipe in the carriage → External control panel Isdpfx Ajttah Rsdkjtg PLC control: → Touchscreen 10.1" → ETH 10/100, X2X Link, USB → Foot switch operation → Data transfer via network (W)LAN or USB → Material database Unique graphic programming: Simple geometries can be calculated directly on the machine. The control calculates the feed values directly after entering the length and angle and the bending angles. Hydraulics: → Hydraulic power 3 kW → Hydraulic pipe clamping with adjustable clamping pressure → Programmable early mandrel retraction Options (can be ordered as additional equipment): → Variable bending speed using frequency converters or servo motors → Automatic tool retraction (manual or controlled) → Pneumatic chuck → Automatic mandrel lubrication → Pneumatic stop system (length + twist) → Mobile version (rollers) → Radius extension Pictures show new machine

Condition: used, Year of construction: 2018, functionality: fully functional, Plasma cutting machine for pipes and profiles Plasma cutting machine for cutting pipes and profiles. The cutting contour is defined and create by the software. The created CNC code can send to the machine via USB or network. The program can be easily choose via the 12"touch display. The automatic cutting process is started after manual insertion of the workpiece. - Tube length: max. 6000mm - for round tube up to OD = 150mm max - for square tube up to 101.6x101.6mm (4 "x4") max - maximum pipe weight 150KG per load - 4-jaw chuck - 1x automatic raw support - fully automatic cutting process - PC control with 12 "touch display - Data import via USB and network - Power consumption: 400V 3P 2KW - weight: 800KG Made in Germany Itodjx Ebzqspfx Adkog The pictures show you an older bigger machine

Condition: used, Year of construction: 2026, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 2026-078, working width: 1,600 mm, working height: 100 mm, cutting width (max.): 1,600 mm, number of slots in tool magazine: 2, Used machine CNC cutter/plotter Cutting area in X and Y: 1,500 x 1,600 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Equipment of the used machine. • 1 cutting bridge and 1 Multifunctional tool head • max. material height 100 mm • Multifunctional tool head to hold 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade Iodjwgc I Rjpfx Adkotg • Punching tool for pinches or holes • Printer mark detection • Camera registration • Milling Head + exhaust Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.