Used Robatech Concept Diamond 5/5 for sale (63,495)

Year of construction: 2016, condition: like new (used), functionality: fully functional, machine/vehicle number: 1109675-001, Robatech Concept Diamond 5/2 Hot Melt Melting Unit Manufacturer: Robatech Model: Concept Diamond 5/2 Article Number: 164001 Serial Number: 1109675-001 Year of Manufacture: 2016 For sale is a Robatech Concept Diamond 5/2 hot melt melting unit, used in an industrial setting. The unit was used in 2019 in a coating system for the production of stair treads. In the same year, the system was upgraded to a larger Robatech Concept Diamond 8 system because a higher melting capacity and conveying performance were required for production. Therefore, the machine offered here was not replaced due to a defect, but solely due to the increased production requirements. Since then, the unit has been kept as a backup machine. Equipment according to Robatech configuration: * 5 kg tank * Gear pump ZPC 5 * 2 sockets with a total of 4 heating zones * Level sensor ILS * External USB interface * Quantity control * Analog input 0–10 V or 4–20 mA * Pneumatic pressure control with pressure gauge for 1 pump * Filter cartridge sintered bronze 130 µm * Connection: 400/230 V AC, 3LNPE, 50–60 Hz, 25 A Technical data: * Type: Hot melt melting unit / Adhesive Melter * Tank size: 5 kg * Pump type: ZPC/GRC * Number of pumps: 1 * Year of manufacture: 2016 * Serial number: 1109675-001 Nwsdpfxozfx A Ee Ai Tjn The unit is in good used condition. Inspection is possible by prior appointment. Errors and prior sale excepted.

Condition: excellent (used), Year of construction: 2023, Complete Robatech hot melt adhesive system for a folding and gluing machine, consisting of 3 guns, fully overhauled in May 2026. Nodozlal Uepfx Ai Town

Year of construction: 2006, condition: ready for operation (used), 2 x Müller Martini Warenkkeber 423 with Robatech Hotmelt Concept B 5/2, year of manufacture 2006 for Müller Martini Tempo saddle stitcher. Nedpsxfwvqsfx Ai Tjwn Good condition

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 3315N130, Year of construction: 2015, total length: 995 mm, total height: 1,600 mm, total width: 1,050 mm, type of input current: three-phase, overall weight: 350 kg, input voltage: 400 V, input frequency: 50 Hz, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, electrical fuse: 16 A, space requirement length: 3,000 mm, space requirement height: 2,400 mm, space requirement width: 1,200 mm, Misan is Czech authorized reseller for machining centers and metal AM machines. Concept Laser QM Powder - inertized industrial powder sieve: - For Concept Laser / GE Additive / Colibrium Additive M2 powder containers. Also compatible with M1 and Mlab bottles. May be used with another machines with compatible bottles. - Suitable for steel, aluminum, inconel, titanium alloys. Nwedpfx Ajz Tf Hfji Ton - Size: 1050 x 995 x 1600 mm - Weight: 350 kg - Power: 3 P/N/PE AC 400V, ±10%, 50Hz-60Hz - Requires inert gas supply: argon or nitrogen, 5 bars Equipment used by customer. First installed in 2015. Fully refurbished by Misan now (new seals, filters, hoses, overflow bottle,...), clean and functional. New container console. Original price: 25.000 Eur We are awaiting your contact. Video conference can be set up if needed. Sieving station can be seen at our showroom. Visit is possible upon contact.

Condition: like new (used), functionality: fully functional, machine/vehicle number: GEADDL-MLAB-G02-900028, Year of construction: 2021, operating hours: 800 h, total length: 1,220 mm, total height: 1,850 mm, total width: 705 mm, type of input current: AC, overall weight: 700 kg, input voltage: 230 V, input current: 7 A, input frequency: 50 Hz, laser power: 100 W, ambient temperature (min.): 15 °C, ambient temperature (max.): 30 °C, table width: 90 mm, table length: 90 mm, We offer this showroom Concept Laser Mlab 100R metal 3D printer - Laser Powder Bed Fusion system (LPBF / SLM) Specification: - Manufacturer: Colibrium Additive / GE Additive / Concept Laser from Lichtenfels, Germany - 100 W singlelaser, 2D optics ScanLab - Build envelope: 90 x 90 x 80 mm - Max. scanning speed: 7 m/s - Focus diameter: 50 μm - Layer thickness: 15 - 50 μm - Connected loads: 1,5 kW; Power supply 1/N/PE AC 230 V, 16 A connector - Inert gas supply: 1 gas connection provided - Ar or N2 (machine was used with argon mostly) - Filtering system: integrated - Dimensions 705 x 1220 x 1848 mm (W x D x H) - Weight: approx. 600 kg - Operating conditions: 15 - 30°C - Holders for different recoater blades types included - A few stainless steel build plates included Includes material parameters for: - Remanium star CoCr alloy, - Parameters for other materials can be inquired from manufacturer. (316L, 17-4 PH, TiAl6V4, CpTi,...) Machine has been used with remanium star only. It is biomedically clean. Age and condition: like new Machine installed at showroom in 2021 for demonstration purposes only: Building demo parts for potential customers, buildjobs at trade fairs and our customer open days. Basically, not more than 5% usage of what could be expected of its age. Maintained by certified service technician only. All manufacturers service safety patches and updates until this date have been applied. Machine clock: 800 hours - not a "Laser ON time", that is expected significantly lower. Original price: 100.000 Eur Optional auxiliary equipment (not included in listing price): - Nitrogen generator with integrated compressor: Parker HPN2-12500C-E - no need for compressed air + 3.000 Eur - Table sieving station Retsch AS 200 + 1.000 Eur - Isolation transformer - needed if machine is connected to home-grade (30 mA) breaker. + 1.000 Eur If you have any questions or need more information, feel free to send us a message or give us a call. Video conference can be set up if needed. Nwedpfjz Tut Usx Ai Tjn Machine can be seen at our showroom. Visit is possible upon contact. Misan is Czech authorized reseller for metal AM machines.

Year of construction: 1997, condition: used, Year of manufacture 1997 Serial number 9937 Working area X 3100mm Working area Y 600mm Working area Z 850mm Main motor 4 x 5Kw Nwodpsmhf E Njfx Ai Ten 5-axis machine Number of milling spindles 4 Number of revolutions max 1800 1 table 3000mm x 550mm

Condition: used, Year of construction: 2019, Flash Labeler – Marel Concept 500 Manufacturer: Marel Ltd. Machine: Flash Labeler Model: Concept 500 Year of manufacture: 2019 Serial number: 10422443 Description The Marel Flash Labeller Concept 500 is an automatic labeling system designed for high-speed labeling in food processing and packaging lines. The machine applies labels quickly and accurately to products or packaging, ensuring reliable identification and traceability in production environments. Marel equipment is widely used in the meat, poultry, fish, and food processing industries due to its hygienic design and reliable performance. Technical Specifications - Manufacturer: Marel Ltd. - Model: Concept 500 - Machine type: Automatic labeling machine - Year: 2019 - Serial number: 10422443 - Voltage: 230 V ±10% - Frequency: 50 / 60 Hz - Current: 4 A Nwsdpfsyt I Rcsx Ai Ten - Short circuit rating: 5 kA - Protection rating: IP54 - Nominal power: approx. 1 kW Key Features - High-speed automatic labeling system - Reliable label placement for product identification - Designed for industrial food processing lines - Compact and hygienic stainless steel construction - Easy integration into existing production lines Applications - Meat and poultry processing - Fish and seafood packaging lines - Food processing and packaging plants - Product traceability and labeling systems Condition Used More photos and full specifications: / Manufacturer: Marel Ltd. Model: Concept 500

Condition: excellent (used), Year of construction: 2019, • Model: Concept 350 – 3200 • Squaring length: 3200 mm Nedpfx Aiez Dp Dzs Tjwn • Blade diameter: 300–350 mm • Blade inner hole: 30 mm • Blade projection (90°): 100 mm (75 mm) • Blade projection (45°): 67 mm (45 mm) • Blade group speed (inverter): 40 m/min • Main motor power: 7.5 hp (5.5 kW) • Extraction outlet: 120 / 100 mm • Extraction air volume: 1800 m³/h • Extraction air speed: 25 m/s • Operating pressure: 7 bar • Air consumption: 85 l/h Ask for live demo on WHATSAPP

Condition: used, Year of construction: 2005, Mitsubishi Diamond 3000 S -5 is a printing machine manufactured by Mitsubishi in 2005, with a format of 720 x 1020 mm and a print count of 300 million. Currently in production in Turkey, it features IPC II Intelligent Press Control, high-speed separators, a refrigeration and recirculation system, Grafix Digitronic powder device, SAPC semi-automatic plate changers, non-stop feeders, cylinder washing device, automatic plate cylinder cocking, automatic blanket washing device, and Mitsubishi Delta dampening system. The delivery terms are FCA. Format: 720 x 1020 mm Nsdpovfxnxsfx Ai Tjwn Equipment: Plate Cylinder Cocking blanket wash up device: autom. SAPC semi automatic plate changer Grafix Digitronic powder device wash device for impression cylinders Mitsubishi Delta Dampening Refrigeration & Recirculation System Non-Stop Feeder IPC II Intelligent Press Control high speed separator

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 200 mm, travel distance Y-axis: 150 mm, travel distance Z-axis: 250 mm, controller manufacturer: EMCO, total height: 1,100 mm, table load: 10 kg, overall weight: 400 kg, spindle speed (max.): 5,000 rpm, spindle motor power: 1,100 W, tool weight: 700 g, product length (max.): 1,135 mm, number of axes: 3, This 3s EMCO Concept Mill 105 was manufactured in 2016. It features a maximum spindle speed of 5000 rpm and a spindle motor power of 1.1 kW, providing efficient machining capabilities. The machine has a table size of 420 × 125 mm and a maximum table load of 10 kg. If you are looking to get high-quality milling capabilities, consider the EMCO Concept Mill 105 vertical machining centre we have for sale. Contact us for further details. • Distance spindle nose to table: 95–245 mm • Table size: 420 × 125 mm • T-slots: 2 × 11 × 90 mm • Max spindle torque: 4.2 Nm • Rapid traverse (X/Y/Z): 5 m/min • Feed rate: 0–5 m/min • Max feed force X/Y: 2000 N • Max feed force Z: 2400 N • Positioning accuracy (X/Y/Z): 0.005 mm • Repeatability: 0.005 mm Nwsdpfx Ajyhcfkoi Ton • Tool stations: 10 • Max tool diameter: 55 mm • Max tool length: 50 mm • Tool change time (T1–T2–T3): 9.7 / 5 / 7.5 s • Connected load: 1.4 kW • Required air pressure: 6 bar

Condition: used, Year of construction: 2016, Marel labeling machine - Concept 500 Nwodpfx Aoxnkh Sji Ton - Top labeller More photos and full specifications: /

Condition: good (used), Year of construction: 2006, Controll: NC4 Clamping force: 250 tons Distance between tie bars: 630 x 630 mm Mold height: 330 x 830 mm Opening stroke: 675 mm Dylight max: 1505 mm Screw diameter: 50 mm Nwjdpozw D Hgofx Ai Tjn Shot volume: 530 cm3 Shot weight: 482 g Injection pressure: 2426 bar Cores- 2 Hot runners- 12 + Robot Demag ergotech W733-0174 Year of manufacture: 2006 Handling capacity: 10 kg Number of axes: 3 Max range: 1000 mm X- 900 mm Y-1400 mm Z- 2500 mm

Condition: excellent (used), Year of construction: 1984, For sale: professional Robatech RoBa 30 adhesive melter, Swiss-made (Robatech AG CH-5630 Muri). The unit is fully functional, complete, and ready for operation. Ideal for packaging lines, folder-gluer machines, cartoners, and equipment requiring precise hotmelt adhesive application. Nwsdpsz Sb Rlofx Ai Ten Technical specifications: * Model: RoBa 30 * Year of manufacture: 1984 * Output: 900 g/min * Max hydraulic pressure: 40 bar * Max air pressure: 5 bar * Max operating temperature: 200°C * Power supply: 240 V * Power consumption: 10 A * Pump ratio: 1:8 * Nameplate legible, pressure gauge operational Condition: * device in good technical condition * complete, with no missing parts * Swiss quality – very robust construction

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 879 1 0052, clamping force: 3,500 kN, Fully operational machine. Numerous wear parts have been replaced recently. Nwedpfxextmpvj Ai Ten

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, power: 7.35 kW (9.99 HP), input voltage: 400 V, input frequency: 50 Hz, cutting height (max.): 105 mm, cutting width (max.): 1,300 mm, saw blade diameter: 350 mm, rotational speed (max.): 4,000 rpm, total length: 4,300 mm, overall weight: 1,300 kg, cutting length (max.): 3,200 mm, pivoting range: 45 °, The Concept 350 combines the advantages of various saw systems: As flexible as a panel saw, the cutting quality of a pressure beam saw, and as ergonomic as a trimming saw. This is the sawing concept for modern industrial production. The machine is a leasing return. Further technical data: - Motorized rip fence with 4 aluminum stops, which move synchronously - Screen control with 8" touchscreen - Air requirement: 6 bar - Sliding table: 1,000 x 400 mm (extension table) - Outrigger table size: 3,200 mm with 2 digital stop jaws - Extraction connection: 1 x 100 mm, 1 x 120 mm - Feed speed: 0 - 40 m/min Special features: - Programmable saw blade height adjustment - Mitre fence +/- 50° - Cutting line laser - Additional support table 800 x 200 mm Nedpfx Aswzuipji Tswn With the new Concept 350, you no longer need a panel saw! The workpiece rests on the machine and is positioned precisely with a pressure beam. The saw unit can be swiveled from 90° to 45°, is guided with precision, and cuts your workpiece at a constant feed speed of 0–40 m/min, ensuring the best possible cutting results. The standard crosscut fence enables quick cutting to length and efficient operation, with significantly less space required compared to any sliding table saw! Advantages over a sliding table panel saw: - Significantly less space required - The pressure beam secures the workpiece on the machine and guarantees optimal cutting results - The pressure beam prevents the operator from reaching into the saw blade - Ergonomic operation, as the operator no longer has to push the material through the saw blade - Time saving, as the operator does not need to guide the material during the sawing process Including delivery and installation within postal code areas 71, 72, 73, 77, 78, 79, 86, 87, 88, 89.

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 1146401-001, tank capacity: 200 l, year of last overhaul: 2017, We are offering a used drum melter, model RobaDrum 200, from the manufacturer Robatech. The machine is no longer needed in our operations but was in daily use until a week ago, in conjunction with a wrapping machine (applying adhesive to foil on MDF/particleboard). The machine functions properly and is ready for immediate use. It shows some external signs of wear and has some adhesive residue, which is typical for normal industrial use, but this does not affect its operation. The machine underwent its annual maintenance by the manufacturer last summer. The machine was controlled via a control panel (see photo), which is included in the sale. Nwsdpoz Sy Smsfx Ai Tjn Technical data: Manufacturer: Robatech Model: RobaDrum 200 Year of manufacture: 2017 Condition: Used, fully operational Application: Hotmelt and PUR adhesives Drum capacity: 200 liters Available for inspection in Winterswijk.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 6618G03006, Year of construction: 2018, operating hours: 10,500 h, total length: 1,818 mm, total height: 2,185 mm, total width: 2,700 mm, type of input current: three-phase, overall weight: 2,500 kg, input voltage: 400 V, input current: 28 A, compressed air connection: 8 bar, input frequency: 50 Hz, laser power: 400 W, ambient temperature (min.): 18 °C, ambient temperature (max.): 25 °C, table width: 250 mm, table length: 250 mm, We offer this showroom Concept Laser M2 metal 3d printer - Laser Powder Bed Fusion system (LPBF / SLM) + peripherals Specification: - Manufacturer: Colibrium Additive / GE Additive / Concept Laser from Lichtenfels, Germany - 400 W singlelaser, 3D optics (variable focus) - ScanLab Intelliscan + VarioScan, internal water cooling and air conditioning of optical parts - Build envelope: 250 x 250 x 350 mm - Scanning speed: 4,5 m/s with variable focus - Focus diameter: 70 - 500 μm - Layer thickness: 20 - 80 μm - Connected loads: Max. power consumption 10 kW; Power supply 3/N/PE AC 400V, 32A connector; compressed air 6-10bar - Inert gas supply: 2 gas connection provided - Ar and N2 (machine was used with argon mostly) - Filtering system: integrated, with a 20 m2 filter surface - Dimensions 2695 x 1818 x 2185 mm (W x D x H) - Weight: approx. 2,500 kg Nwodpfxsz T Nc De Ai Ton - Operating conditions: 18 - 25°C - Holders for three different recoater blades types included - A few aluminum and steel build plates included Includes material parameters for: - 316L stainless steel (1.4404), - AlSi10Mg aluminium alloy, - M300 hot-work steel (1.2709), - TiAL6V4 titanium alloy, - 17-4 PH precipitation hardening steel - Parameters for other materials can be inquired from manufacturer Machine has been used with 316L and Aluminium only. Extra options (included): - IP camera for process monitoring with independent network connection. - Additional filter box for quick filter exchange. Age and condition: slightly used Machine installed at showroom in 2019 for demonstration purposes only: Building demo parts for potential customers, buildjobs at trade fairs and our customer open days, some builds for students. Basically, not more than 20% usage of what could be expected of its age. Maintained by certified service technician only. All manufacturers safety service patches and updates until this date have been applied. Machine clock: 10.500 hours - not a "Laser ON time", that is expected significantly lower. Auxiliary equipment (included): - Internal sieving device - to be mounted on top of dose chamber - External sieving station QM Powder - for independent inertized sieving process --- Size: 1050 x 995 x 1600 mm --- Weight: 350 kg --- Power: 3 P/N/PE AC 400V, ±10%, 50Hz-60Hz --- Compatible with bottles and Concept Laser M2 powder containers - Wet vacuum cleaner for powder materials Ruwac NA7-11 - Electric lifting device with vibration generator for powder containers - filling machine and external powder sieving - Stylish storage for 4 powder containers (some containers included with the machine) --- Size: 1150 x 1220 x 870 mm (H x W x D) --- Weight: 250 kg Original price: 550.000 Eur Optional auxiliary equipment (not included in listing price): - Nitrogen generator: Parker N2 Midigas 6 (requires compressed air input) with 250L buffer tank -- Extra 1000L buffer tank for nitrogen generator for faster inertization + 4.000 Eur - Heat treatment furnace with gas chamber and trolley: Nabertherm N 41/H -- Chamber: 350 x 500 x 250 mm (W x D x H) -- External dimension: 840 x 1160 x 1320 mm (W x D x H) -- Weight: 260 kg + 3.000 Eur If you have any questions or need more information, feel free to send us a message or give us a call. Video conference can be set up if needed. Machine can be seen at our showroom. Visit is possible upon contact. Misan is Czech authorized reseller for metal AM machines.

Condition: excellent (used), Year of construction: 2022,

Condition: used, Concept Laser Concept Laser M2 cusing Multilaser Concept Laser M2 cusing Multilaser: System technology for the safe processing of aluminum and titanium alloys, etc. External dimensions: 2542 x 1818 x 1987 mm (W x D x H) Weight: 2300 kg 2 lasers, 400W each Power supply: 3P/N/PE AC 400 V, 32 A 5 bar compressed air required Protective gas possible via 2 connections for external N2 generators (optional) Build volume: 250 x 250 x 280 mm (X x Y x Z) Material processed: CL31 / Aluminum-silicon-magnesium alloy (AlSi10Mg) or CL20 / Austenitic stainless steel (316L / 1.4404) Nwsdpfx Aiezh Dp Ns Tsn Layer thickness: 20-80 μm Production speed: 2-20 cm³ (depending on material and laser power) Operating conditions: 15-35 degrees Celsius Laser usage time Laser 1: 501 hours Laser 2: 503 hours Additional equipment: Lifting device Inox 200 Weight: 102 kg Max. lifting capacity: 135 kg Protection class: IP65 Wet cutter NA 7-11 H CL EU Zone 22 Dimensions: 800x480-570x755-850 mm Drive type: AC Power: 1.25 kW Voltage: 230 V 9.2 A Protection type: IP65 Frequency: 50 Hz Housing: Steel sheet Airflow: 130 m³/h Continuous negative pressure: -145 mbar Short-term negative pressure: -235 mbar Liquid volume: 7 l Water consumption: 0.26 l/h Weight: 50 kg QM powder Automatic Sieving Station Power supply: 3/N/PE AC 400 V +/- 10% 50/60 Hz Max. current draw: 3A / phase Inert gas: 5 bar Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: ready for operation (used), Year of construction: 2020, saw blade speed: 4,000 rpm, Panel saw manufactured in 2020. This FIMAL concept 350 features a squaring length of 3200 mm and a blade diameter range of 300 to 350 mm. It operates at a blade rotation speed of 4000 rpm and has a main motor power of 7.5 hp. If you are looking to get high-quality cutting capabilities, consider the FIMAL concept 350 machine we have for sale. Contact us for further details. Nsdpfxezug Ste Ai Town • Model: Concept 350 – 3200 • Squaring length: 3200 mm • Blade diameter: 300–350 mm • Blade inner hole: 30 mm • Blade projection (90°): 100 mm (75 mm) • Blade projection (45°): 67 mm (45 mm) • Blade group speed (inverter): 40 m/min • Main motor power: 7.5 hp (5.5 kW) • Extraction outlet: 120 / 100 mm • Extraction air volume: 1800 m³/h • Extraction air speed: 25 m/s • Operating pressure: 7 bar • Air consumption: 85 l/h

Condition: excellent (used), Year of construction: 2018, EMCO Concept MILL 55 Year of manufacture 2018 With tool changer PC-controlled 3-axis universal milling machine for basic CNC training with various industrial controls. Machine complete with full enclosure, CE-compliant safety features, continuously variable main drive, automatic reference point approach, machine light, electrical and mechanical preparation for automation, PC interface card, PC-machine connection cable, data storage device with machine data, tool set for operation, operating manual with spare parts list. The interchangeable control system The interchangeable control system, with which all Concept machines can be equipped, is unique. The user is trained on all commercially available CNC industrial controls on a single machine. Currently, up to eight different controls can be learned. The result: CNC technicians can be deployed flexibly. And that's a decisive advantage: for the specialists as well as for the company. Working Area • Longitudinal X-axis travel: 190 mm • Transverse Y-axis travel: 140 mm • Vertical Z-axis travel: 260 mm Nwsdpfxswkpzlj Ai Tsn • Min. spindle nose-to-table distance: 77 mm • Max. spindle nose-to-table distance: 337 mm Milling Table • Table dimensions (L x W): 420 x 125 mm • T-slots: Number, width, and spacing: 2 x 11 x 90 mm • Max. table load: 10 kg Milling Spindle Drive • Speed range: 150 - 3500 rpm • Three-phase asynchronous motor power: 0.75 kW • Spindle torque: 3.7 Nm Axes • Working feed: 0 - 2 m/min • Maximum feed force X/Y: 800 N • Maximum feed force Z: 1000 N • Average Positioning range according to VDI 3441 in X/Y: 0.008 mm • Average positioning range according to VDI 3441 in Z: 0.008 mm Tool system • Number of tool stations: 8 • Tool selection with directional logic • Max. tool diameter: 40 mm • Max. tool weight: 1 kg Scope of delivery Emco Concept Mill 55 with tool changer Cable Easy2Operate WinNC Sinumerik Operate Base Leveling elements I/O expansion Pneumatic expansion Automatic door Pneumatic vise Robotic interface DNC interface W-holder package

Condition: ready for operation (used), Year of construction: 2017, A continuous servo side sealing machine IFP for the food industry is available. Packaging capacity: 100 packages/min, max. sealing dimensions: 650mm, max. sealing length: unlimited, film material: PP/POF/PVC, max. film reel width: 800mm, max. film reel diameter: 350mm, working height range: 870mm-930mm, output: 9kW, machine dimensions X/Y/Z: approx. 1800mm/2650mm/1500mm, control: Siemens. Documentation available. On-site inspection is possible. Nwjdpfx Aovf Iydei Ten

Year of construction: 2001, condition: used, Clamping force: 1250kN, tie-bar spacing: 475x450mm, injection unit: 440, max. flow rate: 100l/min, max. hydraulic pressure: 190bar, weight: 6.6t, an on-site inspection is possible. Nwedpfx Aiezybu To Tsn

Condition: excellent (used), Ref. 60) Dust Collector N° 3 “RDL” (with fan HP 125) 12’ x 40’ (mm 305 x 1015) Ref. 61) Dust Collector N° 4 “RDL” (with fan HP 125) 12’ x 40’ (mm 305 x 1015) Nodozx Eirepfx Ai Tswn Ref. 62) Dust Collector N° 5 “RDL” (with fan HP 100) 12’ x 40’ (mm 305 x 1015) Ref. 63) Dust Collector N° 6 “Concept Air” (with fan HP 30) 6’ x 20’ (mm 152,5 x 508)

Condition: as good as new (ex-display), functionality: fully functional, power: 7.35 kW (9.99 HP), cutting height (max.): 105 mm, cutting width (max.): 2,100 mm, saw blade diameter: 350 mm, total length: 4,300 mm, The FIMAL CONCEPT 350 ELITE is the further development of the proven CONCEPT 350 PLUS, setting new standards in precision, safety, and efficiency. With a reinforced machine base, optimized extraction system, and a redesigned Multistop fence table, it offers even greater comfort and performance for joiners, furniture makers, and industrial panel processing. Thanks to its pressure beam with automatic feed, the ELITE combines the flexibility of a sliding table saw with the cutting quality of a pressure beam saw – all within a footprint of just 28 m². Technical Specifications ⦁ Aluminum machine and extension tables ⦁ Saw unit tiltable up to 46° ⦁ Pressure beam, including LED lighting with 3 different action colors: WHITE: Machine in stand-by RED: Pressure beam lowering or emergency-stop function BLUE: Saw unit in motion ⦁ Versatile support table 1,000 x 500 mm ⦁ Scoring system via the main saw blade (co-rotating) ⦁ Automatic workpiece length detection for minimal travel distance ⦁ Mobile and height-adjustable control panel, including: Nedpew Axf Rjfx Ai Tswn Saw blade holder, template holder, emergency-stop button, start button, selector switch for grooving/scoring/cutting, rotary switch for feed speed, switches for laser (option) and USB socket ⦁ Max. saw blade projection (350 mm blade): 100 mm at 90° / 70 mm at 45° ⦁ Saw blade: diameter 300 – 350 mm, bore 30 mm ⦁ Saw blade speed: 4,000 rpm ⦁ Motor: 5 kW (= 7.5 HP) ⦁ Feed speed: 0 – 40 m/min ⦁ Total length: approx. 4,250 mm ⦁ Weight: approx. 1,300 – 1,700 kg (depending on cutting length and configuration) ⦁ Required air pressure: 7 bar ⦁ Extraction port: 1 x 100 mm, 1 x 120 mm ⦁ Extension table length: 3,670 mm / 4,270 mm / 4,870 mm (total length) ⦁ Tilting range: 0 - 46° ⦁ Sliding table: 1,000 x 400 mm (extension table) ⦁ Crosscut fence: 3,200 mm with 2 digital flip stops ⦁ Speed: 4,000 rpm ⦁ Air requirement: 6 bar ⦁ Motor voltage: 400 V (50 Hz) ⦁ Feed speed: 0 - 40 m/min Options Multistop, cutting width 2,100 mm instead of 1,300 mm Programmable saw blade height adjustment Miter fence +/-50° Cutting line laser Including delivery and installation within postal code areas 71,72,73,77,78,79,86,87,88,89