Used Robatech Miscellaneous for sale (301)

Condition: excellent (used), Year of construction: 2023, Complete Robatech hot melt adhesive system for a folding and gluing machine, consisting of 3 guns, fully overhauled in May 2026. Nljdpfx Ajzlal Ueglof

Year of construction: 2016, condition: like new (used), functionality: fully functional, machine/vehicle number: 1109675-001, Robatech Concept Diamond 5/2 Hot Melt Melting Unit Manufacturer: Robatech Model: Concept Diamond 5/2 Article Number: 164001 Serial Number: 1109675-001 Year of Manufacture: 2016 For sale is a Robatech Concept Diamond 5/2 hot melt melting unit, used in an industrial setting. The unit was used in 2019 in a coating system for the production of stair treads. In the same year, the system was upgraded to a larger Robatech Concept Diamond 8 system because a higher melting capacity and conveying performance were required for production. Therefore, the machine offered here was not replaced due to a defect, but solely due to the increased production requirements. Since then, the unit has been kept as a backup machine. Equipment according to Robatech configuration: * 5 kg tank * Gear pump ZPC 5 Njdpfozfx A Ejx Aglslf * 2 sockets with a total of 4 heating zones * Level sensor ILS * External USB interface * Quantity control * Analog input 0–10 V or 4–20 mA * Pneumatic pressure control with pressure gauge for 1 pump * Filter cartridge sintered bronze 130 µm * Connection: 400/230 V AC, 3LNPE, 50–60 Hz, 25 A Technical data: * Type: Hot melt melting unit / Adhesive Melter * Tank size: 5 kg * Pump type: ZPC/GRC * Number of pumps: 1 * Year of manufacture: 2016 * Serial number: 1109675-001 The unit is in good used condition. Inspection is possible by prior appointment. Errors and prior sale excepted.

Condition: like new (used), functionality: fully functional, input voltage: 400 V, overall weight: 80 kg, input current: 11 A, Condition: Practically NEW – only used as a demonstration machine (see photos of the very clean interior) Suitable for 2 kg PUR containers (cartridges/blocks) Ideal for edge banding machines, profile wrapping, or other adhesive applications. MOD Technology (Melt-on-Demand): Only melts the required amount of adhesive – prevents PUR glue from burning. Compressed Air/Protective Gas: Operation requires dried compressed air or CO2 (important for PUR processing) Operation: Simple and robust membrane keypad Electrical Connection: 3LPE 400V 50/60Hz Rated Power (Pmax): 4200 W Maximum Current (Imax): 11 A Weight: approx. 80 kg (according to manufacturer) Protection Class: IP32 The unit is fully functional, exceptionally clean, and ready for immediate use. Location: Líšťany 33035, Czech Republic (approx. 50 km from the German border / Waidhaus) Search terms / Suitable for equipment from: Nedpjy D Hfzjfx Aglolf Homag, IMA, Biesse, Brandt, Holz-Her, SCM, Stefani, Hebrock, Felder, edge banding machine, edge bander, PUR adhesive, premelter, profile wrapping.

Condition: excellent (used), Year of construction: 1984, For sale: professional Robatech RoBa 30 adhesive melter, Swiss-made (Robatech AG CH-5630 Muri). The unit is fully functional, complete, and ready for operation. Ideal for packaging lines, folder-gluer machines, cartoners, and equipment requiring precise hotmelt adhesive application. Technical specifications: * Model: RoBa 30 * Year of manufacture: 1984 * Output: 900 g/min * Max hydraulic pressure: 40 bar * Max air pressure: 5 bar * Max operating temperature: 200°C Nljdjum Hufspfx Aglof * Power supply: 240 V * Power consumption: 10 A * Pump ratio: 1:8 * Nameplate legible, pressure gauge operational Condition: * device in good technical condition * complete, with no missing parts * Swiss quality – very robust construction

Condition: used, Year of construction: 2011, Premelter Robatech RobaPur 4 MOD Year: 2011 Description: Nedozat Hvepfx Agljlf -PUR glue

Condition: used, The Robatech Roba 40 nozzle glue system is a specialized adhesive application system designed for precise and efficient gluing operations. Manufactured by Robatech, this model is located in Germany, with pricing available upon request. The system is equipped with a 40 nozzle configuration, ensuring accurate and consistent adhesive application for various industrial and manufacturing needs. Format: Nlsdpfovphziox Agljf Equipment: 40 nozzles for consistent adhesive application

Condition: new, functionality: fully functional, New Robatech hand applicator with new 3 m glue hose for hot melt gluing. Unique advantages: Nedpfxexqp I Aj Agljlf - Ergonomic design of the hand applicator - Maximum application flexibility: horizontal, top-down, bottom-up - Comfortable and non-tiring for the user, preventing uneven strain and muscle tension - CoolTouch handle ensures safety and workplace protection We have several Robatech glue units for sale to which the Ergostar can be connected; we can assist you with these as well. Feel free to inquire about the possibilities.

Condition: used, Year of construction: 1971, The Heidelberg GTP is a high-performance hot foil stamping press, currently operational in a printshop in Germany. Designed for precision and versatility, this machine handles a wide range of applications, from luxury packaging to security printing. With a maximum sheet size of 340 x 460 mm and a minimum of 85 x 102 mm, the GTP accommodates diverse project requirements. It operates at speeds between 1,500 and 4,000 sheets per hour, delivering both efficiency and flexibility. The press features a punching pressure of 60 tons, ensuring crisp, high-quality foil application on various substrates. Weighing approximately 2,250 kg and with compact dimensions of 2.08 x 1.48 x 2.10 meters, the GTP is built for stability and ease of integration into existing workflows. The machine comes complete with all necessary tools, accessories, and a sturdy frame, making it a turnkey solution for any finishing department. Format: 340 x 460 mm Nedpfezwf Ufjx Aglelf Equipment: Hot Foil Stamping Tiegel Heidelberg GTP Size min. 85 x 102mm Size max. 340 x 460mm Speed min. min. 1.500sph - max. 4.000sph Punching pressure 60T Weight approx. 2250kg Dimensions 2,08 x 1,48 x 2,10m Complete with tools and accessories include frame

Condition: used, Year of construction: 2006, Format: 450 x 350 mm Nodpszu Spwofx Agljlf

Condition: used, Year of construction: 2006, Format: 0x0 Equipment: Infeed:Solema Delta ST conveyor belt with cycle memory and accumulation featureContinuous product alignment during transport Turning Station:Programmable product rotation: 90?? left/right and 180??Pressure disc for product positioning during rotationServo-motor controlled with product gap creation function Pallet Elevator:Roller-surface platformCompatible with all standard pallet typesMotorized roller conveyor for stable discharge of complete pallets Automatic Pallet Magazine:Capacity: 6 palletsFlexible pallet type and dimension handlingCompact design Automatic Interlayer Feeder:Programmable: placement on empty pallet or at defined layersStraight-cut, wrinkle-free interlayers required Nlodpfx Agozpzw Hslef Reject Delivery:Integrated stack height control cellsNon-compliant stacks are detected and ejected to prevent counting errors and stack instabilityPrevents faulty stacking before palletizingManual ope Control System:Windows-based touchscreen operating interfaceProgram memory for saving and retrieving jobsAutomatic format changeover via servo motorsNew job data can be loaded while the machine is run Pallet Discharge System:Motorized chain conveyor (length corresponds to one pallet)Discharge height: approx. 130 mm above pallet height

Condition: used, Year of construction: 2020, Format: 0x0 Equipment: Hugo Beck Flexo X Intermittent Film Packaging Machine Product Feed:Manual as a standalone machine / Automatic in-line (flexible configuration) Control System:Touchscreen with temperature memory and reproducible format settings Film Processing:PE, PO, bio-films, center-folded film, and flat film Nodpfszpgh Dsx Aglelf Sealing System:Side sealing + intermittent cross-sealing Operation:Intermittent Kallfass Compact 650 D Shrink Tunnel Type:High-performance energy-saving shrink tunnel Heating System:Patented ring nozzle heating system in double design Blower:Frequency-controlled, Zolltornado-style Zoll hot air flow for uniform shrinking Transport:Maintenance-free plastic modular belt, continuously adjustable speed Film Compatibility:All polyolefin films Safety:Safety equipment according to EC directive EN 60204

Condition: used, Year of construction: 2008, Format: 550 mm Speed: 120 Tacts er minute Equipment: Nlsdpfx Agozpghwelsf Kallfass Universa 500 Servo Fully automatic, continuous side welding machine Type: Hybrid side sealer with continuous product flow Product Feed:Simple feeding system, compatible with products of different lengths and automatic production lines Transport:Vacuum conveyor belt Motion Control:SIEMENS?? SIMOTION?? with servos for all product-related drives Operator Interface:SIEMENS TP 270 touch panel Operation Mode:Continuous product flow with intermittent cross-sealing Kallfass Compact 650 D High-Performance Energy-Saving Shrink Tunnel Type:High-performance energy-saving shrink tunnel Heating System:Patented ring nozzle heating system in double design Blower:Frequency-controlled, Zolltornado-style Zoll hot air flow for uniform shrinking Transport:Maintenance-free plastic modular belt, continuously adjustable speed Film Compatibility:All polyolefin films Safety:Safety equipment according to EC directive EN 60204

Condition: excellent (used), Year of construction: 1983, Description to follow! Nsdpfxsyrtv Io Aglslf

Condition: used, Year of construction: 1998, Format: 650 x 320 mm Equipment: 1 clamp Milling and Notching Station Spine Gluing Side Gluing Hotmelt Automatic Cover Feeder Nledpfxszkapde Aglsf Nipping Station Up to 600 cycles/hour Voltage: 3-phase, 400 V or 230 V 3.3 kW

Condition: used, Year of construction: 2000, Robopac ROBOTAPE 50 M is a band wrapping machine manufactured by Robopac in 2000, with a format of 500 x 500 mm. Currently stored in Germany, it can handle a maximum carton weight of 50 kg and is in good condition without any damages. The delivery terms are FCA. Format: 500 x 500 mm Nedowvut Dspfx Aglolf Equipment: Tape winding machine Max. Carton weight kg 50 Good condition without any damage

Condition: used, Year of construction: 1992, Elcos 2 head drilling machine is a machine manufactured by Elcos in 1992, with a format of 45 x 150 mm. Currently stored in Germany, it features a drill distance of 45 - 150 mm, space behind the drill heads of 100 mm, and is a double head paper driller. It operates with a lever and is single phase 240 volts. The delivery terms are FCA. Format: 45 x 150 mm Equipment: Double head paper driller Drill distance 45 - 150 mm Nodpfswvuubsx Agljlf Space behind drill heads 100 mm Operation Lever operated, single phase 240 Volts

Condition: used, Year of construction: 1994, Format: 0x0 Equipment: 4 head paper drills Foot control Technical data: Number of drill heads: 4x Drill bit diameter: 3 - 14 mm Drilling distance: 1 - 420 mm Stack height: 50 mm Speed: 680 - 2,900 rpm Nljdpszfwkbsfx Aglof

Condition: used, Year of construction: 2018, controller manufacturer: Sonstige, controller model: , _____ Description: Year of manuf. : 2018 Control : Sonstige In General: Manufacturer:DMG (Bürener Maschinenfabrik) Nlodpfxjzf T Nmj Aglsf Year of manufacture:2018 Total number of pumps:5 High-pressure pumps:2 (40 and 80 bar) Filter:Paper belt filter Tank capacity:approx. 980 l

Condition: used, Year of construction: 1999, Format: 340 mm Equipment: VIVA 340 No. 85, equipped with: 1 paper unwinder (1 m diameter) 1 rotary die-cutting unit with magnetic cylinder, 14 Zoll format length 6 letterpress units with integrated register carriage and magnetic cylinder (14 Zoll format length) 1 Grated exhaust system (600 mm diameter) 1 Winding system (700 mm diameter) 1 Longitudinal cutting/trimming unit 1 UV flexo coating unit with magnetic plate cylinder 7 I.S.T. UV dryers with CMK reflectors and provision for water cooling Nlsdpfxszcp D Ne Aglef 1 Rotometrics Hydrajack pressure control system for the main die-cutting unit 1 BST ProMark video web inspection system (model Euroscope) 1 Preparations for COVID-19 treatment 1 Plate punching machine 1 Plate bending machine

Condition: used, Format: 0x0 Nsdpfxszcd Nmj Aglslf

Condition: used, Year of construction: 1991, Format: 760 x 440 mm Equipment: Spindles: 4 Drilling diameter: 3 ??? 10 mm Drilling depth: up to approx. 70 mm Spindle spacing: adjustable Spindle shaft: ?? 11 mm Hole spacing: min. approx. 3 mm / max. approx. 800 mm Table size: approx. 760 x 440 mm Connection: 380 V Power: approx. 1.5 kW Nledey Iz R Hopfx Aglef Weight: approx. 90 kg

Condition: used, Format: A3 Equipment: Maximum mechanical speed: 35 cycles/min. Dimensions: 700 x 260 x 30 mm Power specifications: Frequenz: 50 Hz Nlsdpfx Ageyxqx Uslsf Spannung: 230 V Stromstaerke: 2,5 A

Condition: used, Year of construction: 2012, Format: 500 x 350 mm Nedpfx Aeyx Hu Eegljlf Equipment: Accumulate & Folder ACF-30 (serial 381007) Stacker ST-40 (serial 409107) 3x Collator VAC-600Ha Three knife trimmer HTS-30S (serial 632003) Saddle stitcher SPF-30S (serial 632003)

Condition: used, Year of construction: 1997, Format: 800 x 600 mm Equipment: Good condition without any damage Nljdpfeyg Nhcjx Aglsf

Condition: used, Year of construction: 2019, Format: 2000 x 950 mm Njdpfjyzruijx Agljlf Equipment: Electric Modular Dryer Forced Hot Air System dimension 3800 x 1250 x 2170 mm POWER 15 kW 27 A weight 650 KG