Used Rogi Roll Bender for sale (7,877)

Condition: good (used), Year of construction: 1998, control type: NC control, number of rollers: 4, roller (bottom) diameter: 540 mm, roller (top) diameter: 560 mm, side roll diameter: 420 mm, roller diameter: 440 mm, roller length: 3,100 mm, overall weight: 45,000 kg, total length: 8,700 mm, total width: 2,900 mm, total height: 3,075 mm, power: 81 kW (110.13 HP), 4 roll plate bender HAEUSLER - VRM-hy MACH-ID 9638 Make: HAEUSLER Type: VRM-hy Year: 1998 Smallest bending diameter 640 mm Pressing force against upper roll 5800 kN Conical bending attachment Central lubrication Equipped for change rolls Rolling width: 3100mm Rolling thickness 3x toproll Ø:50mm Rolling thickness 5x toproll Ø:60mm Rolling thickness prebending: 40mm Top Roll Ø: 560+440mm Bottom Roll Ø: 540mm Csdpfx Aezbqquoppsrc Side roll Ø: 420mm Number of rolls: 4 Rolling speed: 0-6 Adjustiment lower roll: 0 - 200mm/min. Adjustment side rolls: 0 - 500mm/min. Number of driven rolls: 2 Power: 81kW Length: 8700mm Width: 2900mm Height: 3075mm Weight: 45000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1978, condition: good (used), Make: HAEUSLER Type: VRM-HY Year: 1978 Specifications Metric US Standard Cedpfxskvm S Ns Appsrc Rolling width 3050 mm Rolling thickness 3x toproll Ø 60 mm Rolling thickness 5x toproll Ø 70 mm Rolling thickness prebending 50 mm Top Roll Ø 630 mm Bottom Roll Ø 600 mm Side roll Ø 500 mm Number of rolls 4 Rolling speed 0 - 5 Adjustiment lower roll 200 mm/min. Adjustment side rolls 200 mm/min. Number of driven rolls 2 Power 120 kW Dimensions (Estimate) Length 5790 mm Width 4200 mm Height 4200 mm Weight 85000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1980, condition: good (used), Make: HAEUSLER Type: VRM-HY Year: 1980 Specifications Metric US Standard Rolling width 3000 mm Rolling thickness 3x toproll Ø 130 mm Rolling thickness 5x toproll Ø 140 mm Rolling thickness prebending 120 mm Top Roll Ø 950 mm Bottom Roll Ø 850 mm Side roll Ø 180 mm Number of rolls 4 Rolling speed 2 + 4 Adjustiment lower roll 0 - 400 mm/min. Csdpfx Aekvm Szjpporc Adjustment side rolls 0 - 400 mm/min. Number of driven rolls 2 Power 132 + 37 kW Dimensions (Estimate) Length 12000 mm Width 5440 mm Height 5650 mm Weight 286000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Rolling width: 2050mm Rolling thickness 3x toproll Ø:18mm Rolling thickness 5x toproll Ø:21mm Rolling thickness prebending: 12mm Top Roll Ø: 280mm Side roll Ø: 260mm Number of rolls: 3 Rolling speed: 0-5 Adjustiment lower roll: 0-150mm/min. Adjustment side rolls: 0-150mm/min. Top support: yes Power: 12kW Length: 3000mm Width: 1500mm Codpfx Apewtpgtsperc Height: 1600mm Weight: 5200kg

Condition: excellent (used), Year of construction: 1997, number of rollers: 4, roller (bottom) diameter: 280 mm, roller (top) diameter: 200 mm, side roll diameter: 280 mm, roller length: 3,000 mm, sheet thickness (max.): 6 mm, overall weight: 7,250 kg, total length: 6,000 mm, total width: 2,000 mm, total height: 2,000 mm, power: 6 kW (8.16 HP), 4 roll plate bender HAEUSLER - VRM-HY MACH-ID 9604 Make: HAEUSLER Type: VRM-HY Control: HAEUSLER CNC Rolling width: 3000mm Rolling thickness 3x toproll Ø:4mm Rolling thickness 5x toproll Ø:6mm Rolling thickness prebending: 3mm Top Roll Ø: 200mm Bottom Roll Ø: 280mm Side roll Ø: 280mm Number of rolls: 4 Rolling speed: 0-5 Adjustiment lower roll: 0-200mm/min. Adjustment side rolls: 0-200mm/min. Number of driven rolls: 2 Power: 6kW Length: 6000mm Width: 2000mm Cedpfsy Expuox Apperc Height: 2000mm Weight: 7250kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2004, control type: CNC control, controller model: Siemens, number of rollers: 4, roller (top) diameter: 12 mm, side roll diameter: 14 mm, working width: 3,100 mm, sheet thickness (max.): 14 mm, overall weight: 12,000 kg, total length: 5,000 mm, total width: 1,900 mm, total height: 3,900 mm, 4 roll plate bender HAEUSLER - VRM-HY 3000 x 14 MACH-ID 9611 Make: HAEUSLER Type: VRM-HY 3000 x 14 Control: Siemens Rolling width: 3100mm Rolling thickness 3x toproll Ø:12mm Rolling thickness 5x toproll Ø:14mm Rolling thickness prebending: 10mm Number of rolls: 4 Rolling speed: 0-5 Top support: yes Cedpfx Asy H A Uqjppjrc Length: 5000mm Width: 1900mm Height: 3900mm Weight: 12000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1991, condition: good (used), Make: HAEUSLER Type: VRM-HY Year: 1991 Specifications Metric US Standard Rolling width 3000 mm Rolling thickness 3x toproll Ø 120 mm Rolling thickness 5x toproll Ø 150 mm Rolling thickness prebending 100 mm Top Roll Ø 910 + 820 + 740 mm Bottom Roll Ø 940 mm Side roll Ø 780 mm Number of rolls 4 Rolling speed 2 + 4 Cedpfx Ajkwcc Nopperc Adjustiment lower roll 200 mm/min. Adjustment side rolls 500 mm/min. Number of driven rolls 2 Power 300 kW Dimensions (Estimate) Length 8000 mm Width 5400 mm Height 5400 mm Weight 290000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Share on

Condition: new, Very robust motorized 3-roll roller Weight 670 kg Executed with hardened rolls Hardness is HRC 28-32 Min. Sheet thickness ----- 0.5 mm Max. Plate thickness ----- 3 mm Max. Working width ----- 1000 mm Pre-bending ----- 2.5 mm Roller diameter ----- 95 mm Motor power ----- 1.5 KW Csdpfx Apoga Tz Aopsrc INCLUDED * Hardened rollers * SCHNEIDER electrical components

Condition: new, Year of construction: 2026, The ESR-1300/2.5 three-roll electromechanical rolling mill with asymmetric shafts is used to produce cylindrical and conical shells of various diameters. This machine is designed for bending sheets up to 2.5 mm, length 1300 mm, upper shaft diameter 90 mm. The most popular are three-roll bending machines from this series, due to their relatively simple and functional construction. Key benefits: Asymmetric arrangement of cylinders The lower and upper rollers rotate through a system of gears and a chain drive from an electric motor Top roller rotates in both directions, equipped with a tilt and swivel mechanism Height-adjustable bottom and side rollers (manually adjustable) Possibility of cone bending Foot control with emergency stop button Chain drive transmits rotation from the electric motor to the rollers. The upper roller is foldable, which facilitates the removal of finished products. The folding roller is equipped with a lock preventing its spontaneous opening during operation. Standard equipment DTR in Polish CE Declaration Crodpfxsmtwuyo Appoc Technical data Model CORMAK ESR-1300/2.5 Maximum working width [mm] 1300 Maximum material thickness [mm] 2.5 Roll diameter [mm] 90 Motor power [kW] 1.5 Device dimensions (length x width x height) [mm] 1800 x 640 x 1000 Weight of the device [kg] 600 NOTE: Standard Equipment Ratings are based on 260 N/mm Cold Yield Metals 2 The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, functionality: fully functional, Year of construction: 2026, The ESR 2020 x 3.5 mm three-roll electromechanical rolling mill with asymmetric shafts is used to produce cylindrical and conical shells of various diameters. This machine is designed for bending sheets with a thickness of up to 3.5 mm, length up to 2020 mm, diameter of the upper shaft 125 mm. The most popular are three-roll bending machines from this series, due to their relatively simple and functional design. Most suitable for those customers who are looking for equipment with medium performance and low cost. The most important advantages: Asymmetric arrangement of the rollers The lower and upper rollers rotate through a system of gears and a chain drive from an electric motor The upper roller rotates in both directions, equipped with a tilt and turn mechanism Height adjustable lower and side rollers (manually adjustable) Cone bending possible Crjdjrh E Nropfx Appsc Foot control with emergency stop button Technical data: Model: ESR 2020 x 3.5 mm Maximum work width: 2020 mm Maximum material thickness: 3,5 mm Roller diameter: 125 mm Motor power: 3 kW Dimensions 2530 x 640 x 1050 mm Weight 1230 kg. (±2%) Standard equipment: Foot controller for operation Manual in Polish/English CE declaration The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, functionality: fully functional, Year of construction: 2026, Electromechanical Plate Rolling Machine ESR 1300 x 4.5 mm Asymmetrical 3-Roll Design | Max Thickness: 4.5 mm | Working Width: 1300 mm The ESR 1300 x 4.5 mm electromechanical plate roller is designed for the production of cylindrical and conical shapes with varying diameters. It is suitable for bending sheet metal up to 4.5 mm thick and 1300 mm wide, with a top roll diameter of 120 mm. This model is part of a popular series of 3-roll bending machines appreciated for their simple yet functional construction. Codpfxew H Rqys Appjrc Machine Description Asymmetrical roll arrangement for increased flexibility in shaping Top and bottom rolls powered via gear and chain transmission driven by an electric motor Top roll can rotate in both directions and is equipped with a tilting and swiveling mechanism for easy part removal Manually adjustable lower and side rolls for precise bending control Cone bending capability Foot pedal controller with an emergency stop button for safe and convenient operation Technical Specifications Parameter Value Model ESR 1300 x 4.5 mm Max. working width 1300 mm Roll diameter 120 mm Max. sheet thickness 4.5 mm Motor power 2.2 kW Machine dimensions (L × W × H) 1810 × 640 × 1050 mm Approx. weight 660 kg (±2%) Standard Equipment Foot pedal control unit User manual CE Declaration of Conformity Manufacturer: Cormak

Condition: new, ROGI PR-1300 ELECTRIC ROLLER Heavy and robust execution Weight 800 KG Executed with hardened rolls Hardness is HRC 28-32 Cedpfoga Tvwex Appjrc Min. Sheet thickness ----- 0.5 mm Max. Plate thickness ----- 3 mm Max. Working width ----- 1300 mm Pre-bending ----- 2.5 mm Roller diameter ----- 95 mm Motor power ----- 2.2 KW INCLUDED * Hardened rollers * SCHNEIDER electrical components

Condition: new, Year of construction: 2026, functionality: fully functional, The three-roll electromechanical plate rolling machine ESR 2550 x 3.5 mm with asymmetrical rolls is designed for the production of cylindrical and conical shells with various diameters. This machine is intended for bending metal sheets up to 3.5 mm thick and up to 2550 mm in length. The diameter of the top roll is 125 mm. Three-roll bending machines from this series are the most popular due to their relatively simple yet functional design. They are best suited for customers looking for medium productivity at a low cost. Main advantages: Asymmetrical roll arrangement The lower and upper rolls are driven by an electric motor via a gear system and chain drive The upper roll rotates in both directions and is equipped with a tilting and swiveling mechanism Lower and side rolls with height adjustment (manually adjusted) Cone bending capability Foot pedal control with emergency stop button Technical data: Model: ESR 2550 x 3.5 mm Maximum working width: 2550 mm Maximum material thickness: 3.5 mm Roll diameter: 125 mm Motor power: 3 kW Dimensions (L/W/H): 3000 x 640 x 1050 mm Approx. weight: 1500 kg (±2%) Standard equipment: Foot pedal control Operating manual in Polish Csdpfx Apjycg Urepjrc CE Declaration of Conformity

Condition: new, functionality: fully functional, Year of construction: 2026, Machine characteristic A solid steel machine body based on the most modern construction supported by many years of experience in roll bender production. All rolls hardened and very precisely bearing Hydraulic swivel bearings for easy removal of workpiece. Asymmetric rotary bender with three rollers. Adjustable bottom and rear roller. Tilting upper roll with eccentric locking. Operating the machine via a foot control. Manual rear roller infeed. Braking motor Control panel Csderh E Iujpfx Appsrc Technical parameters MAXIMUM WORKING WIDTH 1300 mm MAXIMUM MATERIAL THICKNESS 4,5 mm MOTOR POWER 2,2 kW DIMENSIONS 1810 mm x 640 mm x 1050 mm WEIGHT 660 kg Standard equipment Foot controller Tool case TOD in Polish language EC Declaration The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: used, 3-roller bender Codpfx Apeuluhwepsrc Brand RAGACHE Type New Tube CP70 3 drive rollers diameter 232 mm Rectangle capacity Standard steel 60.0 mm Round capacity Standard steel 40.0 mm Capacity L Standard steel 70.0 mm Capacity U Standard steel 120.0 mm Capacity T Standard steel 60.0 mm Capacity I Standard steel 120.0 mm

Condition: excellent (used), Year of construction: 2020, operating hours: 1,200 h, functionality: fully functional, machine/vehicle number: 808482, Excellent condition 2020 Rollomatic ShapeSmart NP50 CNC pinch & peel grinding machine. Fully operational and under power. Includes latest software package, Comat coolant filtration/temperature control system, Marcus checking system, loader pallet sets, ultra precision collets, grinding wheels, tooling and accessories. Immediate availability, inspection and demonstration welcome by appointment. The high-speed tool loader, designed by Rollomatic and integrated into the basic machine, was developed with fast setup and ease-of-use in mind. This is achieved by using pre-calibrated cassettes and clamps to hold different diameters without resetting the position. Rollomatic automatic loaders are known to be the fastest and most reliable in our industry. Fast to set up Capacity up to 1’000 parts Robust, low maintenance design Checking and measuring the part immediately after machining is essential to guarantee the quality of the production. The post-process measuring system immediately transmits the compensation value that may be necessary to achieve production within the planned tolerances. Accuracy & reliability Compensation of the grinding wheel position Constant production quality The Smart Touch Probe is a contact measurement system that allows the blank position to be defined before grinding and avoids variations during production. The system also compensates for machine thermal drift caused by changes in ambient temperature. Runout compensation and core diameter measurement Setting assistance Superior stability during the production process Elimination of scrap during unattended production The StickSmart® is an automatic sticking system for in-process cleaning of grinding wheels. The «stick», mounted in a holder, is used to regenerate superabrasive grinding wheels to maintain their cutting performance. Extends the working life of the wheel Extends unattended production cycles with high-performance wheels Reliable and safe automatic process for the operator. Crjdpoy Udwvefx Appsc Efficient, economical and safe solutionSimple and efficient, the right-side door has been designed to facilitate the work of the operator when changing the orientation of the grinding wheels. Ergonomics for the operator Secure opening Guaranteed tightness

Condition: new, Motor power ----- 3.75 kW Cedpfxov Uzn Ho Apporc X-axis travel ----- 1300 mm Y-axis travel ----- 320 mm Z-axis travel ----- 450 mm Spindle speed range, horizontal milling spindle ----- 58 ~ 1800 rpm Spindle speed range, vertical milling spindle ----- 58 ~ 3000 rpm Vertical spindle taper ----- ISO 40 Horizontal spindle taper ----- ISO 50 Table ----- 1650 x 360 mm Weight ----- 2200 kg INCLUDED * 3-axis digital readout, SINO brand * Automatic feed for worktable X, Y, Z * Automatic spindle feed * LED lighting * Cooling system * Deluxe control panel * Tilting milling head, left/right 0 - 45 degrees * Rotating worktable * Pneumatic clamping system

Condition: excellent (used), Lasermax LX550 Roll Feed System with LX581 Module Roll-fed digital print finishing system Designed for continuous-feed digital printing applications Automatic web feeding and tension control Integrated touchscreen control High-volume production capability Suitable for transactional, direct mail and book production workflows Modular system design Made in Sweden Technical Data LX550 Power supply: 230 V, 1-phase, 50 Hz Power consumption: 1800 W Rated current: 10 A LX581 Power supply: 200–240 V, 1-phase, 50/60 Hz Power consumption: 1200 W Cedpfx Apjzaq Rfsporc Rated current: 10 A Circuit breaker: 15 A Machine Information LX550 Serial No: 09LX550034 LX581 Serial No: 09LX581002

Condition: good (used), Year of construction: 1990, machine/vehicle number: 0164390271794, Offer 26137 Hydraulic combination flat bar shear with notching device and punch press Technical data: - Flat bar shear - Blade length 360 mm - For flat material 350 x 13 mm - or 230 x 20 mm - Profile steel shear - L-steel at 90° 140 x 13 mm - at 45° 70 x 7 mm - T-steel at 90° 70 mm - Round bar shear - Round steel 50 mm - Square steel 42 mm - Notching device - For material up to 12 mm - Right-hand notching up to 52 x 90 mm - Punch press - Punching force approx. 550 kN - Stroke, infinitely adjustable 0 - 60 mm - Punches holes in steel up to 30 mm diameter in 16 mm - Overhang 320 mm - Hydraulic drive 400 V / 5.5 kW - Two separate working cylinders and separate foot switches for each - Space requirement approx. W 1400 x H 1600 x D 750 mm Credpfxjy Uwu Uo Appsc - Weight approx. 1300 kg - Includes: - Various punches and dies in a separate tool cabinet - Support and stop table - Stop

Condition: used, Year of construction: 1993, Technical details: workpiece thickness - max.: 80 mm workpiece thickness min.: 5 mm plate size without being adjusted: 2000x1000 mm size of plate min.: 100x100 mm longitudinal travel: 2800 mm cross travel: 1000 mm control: CNC Mubea Matic100 hole diameter: min/max:10/40 mm tool taper: Kegel/cone/cono DIN 6327 bore spindle stroke: max. 150 mm positioning accuracy: +/- 0,5 mm spindle speeds:: 112-180-224-280-355-560 U/min traversing speed: 80 m/min feed length: max. 150 mm rapid traverse: 8 m/min work table:: L:2500;B:950 mm workpiece weight: 750 kg deburring device max.: d=40 mm work height max.: 1050 mm arm gripping device: 4 Stück/ pcs opening of gripping pliers min/max.: Typ I: 5/45 mm opening of gripping pliers min/max.: Typ II: 45/85 mm air-pressure connection: 6 bar total power requirement: 30 kw Credpfx Aeu Id Rusppsc Weight approx.: 5,5 t space requirements approx. LxWxH: 5,0 x 5,5 x 2,7 (je nach Aufstellung) m - plate size with beeing adjusted also 1000x4000 mm possible - with roller conveyor 2x1000mm - material supporting table complete with supporting elements, guidance rail for guidance and transportation of the positioning wagons , cooling of the drill via air pressure - control for 2 axis positioning x-axis 80m/min and y-axis 30m/min, - memory capacity approx. 10.000 programs - position wagon/carriage, 2 material support table, material standard gauge railway, - electric cabinet, control panel, hydr. aggregate accessories: - 1 position trolley, 2 material support tables, material web, control panel, hydraulic unit, deburring device Equipment: - 2 pieces drill sleeves, roller track 1800x1000mm and roller tracks 2x1000mm Machine is not under power and ready for transport. *

Condition: used, Year of construction: 1993, Technical details: throat: 220 mm number of strokes: 24 Hub/min Crsdpfx Asu Ickyoppec height of stroke: 100 mm Punching capacity: 800 (80 to) kN round bar steel: max. Ø 30 (scheren) mm square edge steel: 28 (scheren) mm angle steel: 90°/45°: 110 x 10 / 65 x 8 (scheren) mm flat steel: 180 x 18 / 350 x 16 (scheren) mm knife length: 360 mm hole diameter: Ø 30 x 20 mm (stanzen) mm plate thickness: max. 13 (ausklinken) mm total power requirement: 5,5 kW weight of the machine ca.: 1,3 t dimension machine xH: 1,3 x 0,7 x 1,85 m Hydraulic flat, profile and bar steel shears with hole punch, notcher Application: Shearing - notching - punching Shears: with stop L:280 x W:60 xH:12.5 mm Table size WxD: 280 x 440 mm Working height: 760 mm Punching: Table size W: 280 x D: 280 mm Material support W: 538 mm x D: 328 mm x D: 10 mm Working height: 1120 mm with scraper Notching: Table size W: 450 mm x D: 310 mm x D: 13.5 mm Working height: 1115 mm Hydraulic pressure 260 bar, 50 liters Hand control / foot control *

Condition: used, Technical details: Cjdpfxexu Dxqo Apporc bending angle max.: 180 ° working height: 350-550 mm operating voltage: 380 V revolutions per minute: 10-20 U/min number of bars max.: 1-4 mm total power requirement: 1,3/2,1 kW Weight approx.: 690 kg dimension machine xH: 1,2 x 0,87 x 1,2 m -Two plate speeds -Mode selector switch for automatic mode, jog mode, continuous operation -Four continuously adjustable counterholder bars without accessories! *

Year of construction: 2021, condition: used, Karl Roll RUK0200-130-150-04 Automated part washing system (2021) The automatic cleaning system is used exclusively for cleaning and degreasing metal parts using aqueous media. Including a VE-Water supply 3x400V/50Hz-415kW/647A total connected power 2000x1300x1600mm batch size/workpiece carrier size (L x W x H) 8.0 batches/hour max. throughput with a batch weight of 300kg (including workpiece carrier) depending on the program 450 kg (carrier + goods) max. batch weight/The weight must be evenly distributed in the basket Cleaning station volume 7550 liters approx. Station 1 6900 liters approx. Station 2 6900 liters approx. Station 3 7500 liters approx. VE water tank Heating - electric 96 kW Station 1 72 kW Station 2 Cedpfjy Uxvtjx Apperc 72 kW Station 3 24 kW VE water tank 72 kW Hot air station 75 °C max. temperature cleaning baths 65°C max. temperature VE water tanks Process Station 1: Cleaning 1 in aqueous solution, hot Filter circuit with pressure monitoring Pressure recirculation device Fluid draining Oil separator Short stroke via trolley Re-dosing of 2 different media, Refilling directly or via pump cascade from station 2. Station 2: Rinse 1 in hot aqueous solution Filter circuit with pressure monitoring Short stroke via trolley Refilling directly or via pump cascade from station 3. Station 3: Rinse 2 in hot aqueous solution Filter circuit with pressure monitoring Short stroke via trolley DI water recirculation system, Refill directly. Station 4 on unloading track: Hot air drying Fans Heating coil with temperature monitoring Air supply via filter Adjustable Bypass exhaust air Condition: Very Good

Condition: used, Year of construction: 2003, Machine for producing square rolls, equipped with a soaking station and a station for coating with grains. • Soaking station Codpfx Apey Uklaeporc • Station for coating with grains • Machine imported from Germany The machine is in good working order. We also have a wide selection of used bakery and confectionery equipment. Please contact us – communication is possible in English, German, and Russian.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, Rollomatic 660XW, year of manufacture 2024, 6-axis CNC tool grinding machine: Control system: FANUC 30iMB Grinding wheel changer: 6-position Tool diameter: Ø 0.1 – 12.7 mm Codpfx Apey S Uxreperc 4 linear axes + 2 rotary axes Grinding spindle (max): 14 kW Spindle speed: 500 – 12,000 rpm Machine dimensions: 1840 × 1560 × 2250 mm Machine weight: approx. 2,500 kg