Used Roll Bender for sale (8,079)

Condition: new, Very robust motorized 3-roll roller Weight 670 kg Executed with hardened rolls Hardness is HRC 28-32 Min. Sheet thickness ----- 0.5 mm Max. Plate thickness ----- 3 mm Hnjdega Tz Aspfx Ap Hen Max. Working width ----- 1000 mm Pre-bending ----- 2.5 mm Roller diameter ----- 95 mm Motor power ----- 1.5 KW INCLUDED * Hardened rollers * SCHNEIDER electrical components

Condition: excellent (used), Year of construction: 2000, control type: NC control, actuation type: hydraulic, controller manufacturer: Davi Smart, number of rollers: 4, roller (bottom) diameter: 340 mm, roller (top) diameter: 370 mm, side roll diameter: 320 mm, roller length: 3,100 mm, sheet thickness (max.): 25 mm, overall weight: 18,500 kg, total length: 5,900 mm, total width: 2,200 mm, total height: 2,300 mm, power: 30 kW (40.79 HP), 4 roll plate bender Davi Promau - MCB 3037 MACH-ID 9613 Make: Davi Promau Type: MCB 3037 Control: Davi Smart Hodjzcnuyopfx Ap Hjnn Year: 2000 Conical bending attachment Extended roll end for section bending jobs Digital read out position side rolls Central lubrication Rolling width: 3100mm Rolling thickness 3x toproll Ø:20mm Rolling thickness 5x toproll Ø:25mm Rolling thickness prebending: 22mm Top Roll Ø: 370mm Bottom Roll Ø: 340mm Side roll Ø: 320mm Number of rolls: 4 Rolling speed: 0-5 Adjustiment lower roll: 0-200mm/min. Adjustment side rolls: 0-200mm/min. Number of driven rolls: 2 Power: 30kW Length: 5900mm Width: 2200mm Height: 2300mm Weight: 18500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1998, control type: NC control, number of rollers: 4, roller (bottom) diameter: 540 mm, roller (top) diameter: 560 mm, side roll diameter: 420 mm, roller diameter: 440 mm, roller length: 3,100 mm, overall weight: 45,000 kg, total length: 8,700 mm, total width: 2,900 mm, total height: 3,075 mm, power: 81 kW (110.13 HP), 4 roll plate bender HAEUSLER - VRM-hy MACH-ID 9638 Make: HAEUSLER Type: VRM-hy Year: 1998 Smallest bending diameter 640 mm Pressing force against upper roll 5800 kN Conical bending attachment Central lubrication Equipped for change rolls Rolling width: 3100mm Rolling thickness 3x toproll Ø:50mm Rolling thickness 5x toproll Ø:60mm Rolling thickness prebending: 40mm Top Roll Ø: 560+440mm Bottom Roll Ø: 540mm Side roll Ø: 420mm Number of rolls: 4 Rolling speed: 0-6 Adjustiment lower roll: 0 - 200mm/min. Adjustment side rolls: 0 - 500mm/min. Hodpfxozbqquj Ap Hjnn Number of driven rolls: 2 Power: 81kW Length: 8700mm Width: 2900mm Height: 3075mm Weight: 45000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1978, condition: good (used), Make: HAEUSLER Type: VRM-HY Year: 1978 Specifications Metric US Standard Rolling width 3050 mm Rolling thickness 3x toproll Ø 60 mm Hnedokvm S Nepfx Ap Hsn Rolling thickness 5x toproll Ø 70 mm Rolling thickness prebending 50 mm Top Roll Ø 630 mm Bottom Roll Ø 600 mm Side roll Ø 500 mm Number of rolls 4 Rolling speed 0 - 5 Adjustiment lower roll 200 mm/min. Adjustment side rolls 200 mm/min. Number of driven rolls 2 Power 120 kW Dimensions (Estimate) Length 5790 mm Width 4200 mm Height 4200 mm Weight 85000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1980, condition: good (used), Make: HAEUSLER Hsdpfskvm Szox Ap Hjnn Type: VRM-HY Year: 1980 Specifications Metric US Standard Rolling width 3000 mm Rolling thickness 3x toproll Ø 130 mm Rolling thickness 5x toproll Ø 140 mm Rolling thickness prebending 120 mm Top Roll Ø 950 mm Bottom Roll Ø 850 mm Side roll Ø 180 mm Number of rolls 4 Rolling speed 2 + 4 Adjustiment lower roll 0 - 400 mm/min. Adjustment side rolls 0 - 400 mm/min. Number of driven rolls 2 Power 132 + 37 kW Dimensions (Estimate) Length 12000 mm Width 5440 mm Height 5650 mm Weight 286000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1997, number of rollers: 4, roller (bottom) diameter: 280 mm, roller (top) diameter: 200 mm, side roll diameter: 280 mm, roller length: 3,000 mm, sheet thickness (max.): 6 mm, overall weight: 7,250 kg, total length: 6,000 mm, total width: 2,000 mm, total height: 2,000 mm, power: 6 kW (8.16 HP), 4 roll plate bender HAEUSLER - VRM-HY MACH-ID 9604 Make: HAEUSLER Type: VRM-HY Control: HAEUSLER CNC Rolling width: 3000mm Rolling thickness 3x toproll Ø:4mm Rolling thickness 5x toproll Ø:6mm Rolling thickness prebending: 3mm Top Roll Ø: 200mm Bottom Roll Ø: 280mm Side roll Ø: 280mm Number of rolls: 4 Rolling speed: 0-5 Adjustiment lower roll: 0-200mm/min. Adjustment side rolls: 0-200mm/min. Number of driven rolls: 2 Power: 6kW Hjdpfoy Expujx Ap Honn Length: 6000mm Width: 2000mm Height: 2000mm Weight: 7250kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1991, condition: good (used), Make: HAEUSLER Type: VRM-HY Year: 1991 Specifications Metric US Standard Rolling width 3000 mm Rolling thickness 3x toproll Ø 120 mm Rolling thickness 5x toproll Ø 150 mm Rolling thickness prebending 100 mm Top Roll Ø 910 + 820 + 740 mm Bottom Roll Ø 940 mm Side roll Ø 780 mm Number of rolls 4 Rolling speed 2 + 4 Adjustiment lower roll Hjdpfx Askwcc Nop Honn 200 mm/min. Adjustment side rolls 500 mm/min. Number of driven rolls 2 Power 300 kW Dimensions (Estimate) Length 8000 mm Width 5400 mm Height 5400 mm Weight 290000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Share on

Condition: new, ROGI PR-1300 ELECTRIC ROLLER Heavy and robust execution Weight 800 KG Executed with hardened rolls Hjdsga Tvwspfx Ap Hjnn Hardness is HRC 28-32 Min. Sheet thickness ----- 0.5 mm Max. Plate thickness ----- 3 mm Max. Working width ----- 1300 mm Pre-bending ----- 2.5 mm Roller diameter ----- 95 mm Motor power ----- 2.2 KW INCLUDED * Hardened rollers * SCHNEIDER electrical components

Condition: new, Year of construction: 2026, The ESR-1300/2.5 three-roll electromechanical rolling mill with asymmetric shafts is used to produce cylindrical and conical shells of various diameters. This machine is designed for bending sheets up to 2.5 mm, length 1300 mm, upper shaft diameter 90 mm. The most popular are three-roll bending machines from this series, due to their relatively simple and functional construction. Key benefits: Asymmetric arrangement of cylinders The lower and upper rollers rotate through a system of gears and a chain drive from an electric motor Top roller rotates in both directions, equipped with a tilt and swivel mechanism Height-adjustable bottom and side rollers (manually adjustable) Hnsdpfx Apomtwuyo Hjn Possibility of cone bending Foot control with emergency stop button Chain drive transmits rotation from the electric motor to the rollers. The upper roller is foldable, which facilitates the removal of finished products. The folding roller is equipped with a lock preventing its spontaneous opening during operation. Standard equipment DTR in Polish CE Declaration Technical data Model CORMAK ESR-1300/2.5 Maximum working width [mm] 1300 Maximum material thickness [mm] 2.5 Roll diameter [mm] 90 Motor power [kW] 1.5 Device dimensions (length x width x height) [mm] 1800 x 640 x 1000 Weight of the device [kg] 600 NOTE: Standard Equipment Ratings are based on 260 N/mm Cold Yield Metals 2 The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, functionality: fully functional, Year of construction: 2026, The ESR 2020 x 3.5 mm three-roll electromechanical rolling mill with asymmetric shafts is used to produce cylindrical and conical shells of various diameters. This machine is designed for bending sheets with a thickness of up to 3.5 mm, length up to 2020 mm, diameter of the upper shaft 125 mm. The most popular are three-roll bending machines from this series, due to their relatively simple and functional design. Most suitable for those customers who are looking for equipment with medium performance and low cost. The most important advantages: Asymmetric arrangement of the rollers The lower and upper rollers rotate through a system of gears and a chain drive from an electric motor The upper roller rotates in both directions, equipped with a tilt and turn mechanism Height adjustable lower and side rollers (manually adjustable) Cone bending possible Foot control with emergency stop button Technical data: Model: ESR 2020 x 3.5 mm Maximum work width: 2020 mm Maximum material thickness: 3,5 mm Roller diameter: 125 mm Motor power: 3 kW Dimensions 2530 x 640 x 1050 mm Weight 1230 kg. (±2%) Standard equipment: Foot controller for operation Manual in Polish/English CE declaration Hnjdpfx Aporh E Nrs Hen The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, functionality: fully functional, Year of construction: 2026, Electromechanical Plate Rolling Machine ESR 1300 x 4.5 mm Asymmetrical 3-Roll Design | Max Thickness: 4.5 mm | Working Width: 1300 mm The ESR 1300 x 4.5 mm electromechanical plate roller is designed for the production of cylindrical and conical shapes with varying diameters. It is suitable for bending sheet metal up to 4.5 mm thick and 1300 mm wide, with a top roll diameter of 120 mm. This model is part of a popular series of 3-roll bending machines appreciated for their simple yet functional construction. Machine Description Asymmetrical roll arrangement for increased flexibility in shaping Top and bottom rolls powered via gear and chain transmission driven by an electric motor Top roll can rotate in both directions and is equipped with a tilting and swiveling mechanism for easy part removal Manually adjustable lower and side rolls for precise bending control Cone bending capability Foot pedal controller with an emergency stop button for safe and convenient operation Technical Specifications Parameter Value Model ESR 1300 x 4.5 mm Max. working width 1300 mm Roll diameter 120 mm Max. sheet thickness 4.5 mm Motor power 2.2 kW Machine dimensions (L × W × H) 1810 × 640 × 1050 mm Approx. weight 660 kg (±2%) Standard Equipment Foot pedal control unit User manual Hsdpfew H Rqyex Ap Hjnn CE Declaration of Conformity Manufacturer: Cormak

Condition: new, Year of construction: 2026, functionality: fully functional, The three-roll electromechanical plate rolling machine ESR 2550 x 3.5 mm with asymmetrical rolls is designed for the production of cylindrical and conical shells with various diameters. This machine is intended for bending metal sheets up to 3.5 mm thick and up to 2550 mm in length. The diameter of the top roll is 125 mm. Three-roll bending machines from this series are the most popular due to their relatively simple yet functional design. They are best suited for customers looking for medium productivity at a low cost. Main advantages: Asymmetrical roll arrangement The lower and upper rolls are driven by an electric motor via a gear system and chain drive The upper roll rotates in both directions and is equipped with a tilting and swiveling mechanism Lower and side rolls with height adjustment (manually adjusted) Cone bending capability Foot pedal control with emergency stop button Technical data: Model: ESR 2550 x 3.5 mm Maximum working width: 2550 mm Maximum material thickness: 3.5 mm Roll diameter: 125 mm Motor power: 3 kW Dimensions (L/W/H): 3000 x 640 x 1050 mm Approx. weight: 1500 kg (±2%) Standard equipment: Hnjdpfx Aoycg Urop Hen Foot pedal control Operating manual in Polish CE Declaration of Conformity

Condition: new, functionality: fully functional, Year of construction: 2026, Machine characteristic A solid steel machine body based on the most modern construction supported by many years of experience in roll bender production. All rolls hardened and very precisely bearing Hydraulic swivel bearings for easy removal of workpiece. Asymmetric rotary bender with three rollers. Adjustable bottom and rear roller. Tilting upper roll with eccentric locking. Operating the machine via a foot control. Manual rear roller infeed. Braking motor Control panel Technical parameters MAXIMUM WORKING WIDTH 1300 mm MAXIMUM MATERIAL THICKNESS 4,5 mm MOTOR POWER 2,2 kW DIMENSIONS 1810 mm x 640 mm x 1050 mm WEIGHT 660 kg Standard equipment Hedpfxjrh E Iuo Ap Henn Foot controller Tool case TOD in Polish language EC Declaration The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: used, 3-roller bender Hnjdpfx Ajuluhwsp Hen Brand RAGACHE Type New Tube CP70 3 drive rollers diameter 232 mm Rectangle capacity Standard steel 60.0 mm Round capacity Standard steel 40.0 mm Capacity L Standard steel 70.0 mm Capacity U Standard steel 120.0 mm Capacity T Standard steel 60.0 mm Capacity I Standard steel 120.0 mm

Condition: used, Year of construction: 2019, functionality: fully functional, Roller Conveyor / Gravity Conveyor / Pallet Roller Conveyor Manufacturer: Rack & Roll Condition: Used Year of manufacture: 2019 Model: Gravity Installation: Consisting of 260.46 meters The system consists of: 30 segments x approx. 2550 mm length 18 segments x approx. 2395 mm length 16 segments x approx. 1445 mm length Stock available: approx. 142.73 meters Total width: approx. 1125 mm Roller width/conveying width: approx. 1035 mm Roller/axle spacing: approx. 150 mm Roller diameter: 60 mm Frame: 85/35 mm 1 to 2 brake rollers per segment installed, 80 mm diameter and 25 segments x approx. 2795 mm length 6 segments x approx. 2400 mm length 28 segments x approx. 1195 mm length Stock available: 117.73 meters Total width: approx. 1145 mm Roller width/conveying width: approx. 1055 mm Roller/axle spacing: approx. 125/150 mm Roller diameter: 60 mm Frame: 85/35 mm Material: Galvanized steel 1 to 2 brake rollers per segment installed, 80 mm diameter Price: per meter Internal item number: 2026012401 Features: Condition: Fully operational, with signs of wear Ideal for fast material handling Professionally dismantled and packaged Collection address: Industriestraße 5 (47918 Tönisvorst) The conveyor system was operational up until dismantling. Thanks to the excellent manufacturing quality, your materials glide smoothly to their destination, even under heavy loads. Tailor-made solutions for your intralogistics We are your expert partner for roller conveyors, belt conveyors, incline conveyors or telescopic conveyors for loading and unloading goods! We are happy to provide a customised quote or assist you with layout or installation inquiries. Just let us know your requirements and onsite conditions. Benefit from our many years of experience and extensive network of specialists. We have successfully implemented projects for companies across a broad range of industries, including logistics, pharmaceuticals, trades, and electronics. Let us work together to develop cost-effective and sustainable ways to optimise your processes and material flow. We can also offer fully automated sorting solutions and complementary components such as picking shelves or bins. Hedpsyc H Avofx Ap Hsnn

Condition: used, Year of construction: 2019, functionality: fully functional, Removal/Feed Unit, Pallet Roller Conveyor/Roller Conveyor Manufacturer: Rack & Roll Condition: Used Hsdpfx Asydfugjp Honn Year of Manufacture: 2019 Model: Gravity Segment Length: approx. 2395 mm Total Width: approx. 1145 mm Roller/Conveyor Width: approx. 1055 mm Roller/Axle Spacing: approx. 100 mm and 150 mm Roller Diameter: 60 mm Frame: 85/35 mm Material: Galvanized steel Up to 2 brake rollers per segment Stock quantity: 28 units Price per unit Internal Item Number: 2026012601 Features: Condition: Fully functional, with signs of use Ideal for fast material transport Professionally dismantled and packaged Collection Address: Industriestraße 5 (47918 Tönisvorst) The conveyor system was in operation until dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under heavy loads. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for loading and unloading your goods, we are your competent partner! We are happy to provide you with an individual quotation or advise you on planning or installation matters. Simply let us know your requirements and site conditions. Take advantage of our many years of experience and our excellent network of professionals. We have already successfully implemented projects for companies in a wide range of industries, such as logistics, the pharmaceutical industry, trades, and the electronics sector. Together, we will find solutions to optimize your processes and material flow cost-effectively and sustainably. We can also offer you fully automated sorting systems or supplementary components such as order-picking racks or bins.

Condition: used, Year of construction: 2019, functionality: fully functional, Pick-up/discharge unit, pallet roller conveyor/roller conveyor Manufacturer: Rack & Roll Condition: Used Year of manufacture: 2019 Model: Gravity Segment length: approx. 2375 mm Overall width: approx. 1125 mm Roller/conveyor width: approx. 1035 mm Roller/axle spacing: approx. 100 mm and 150 mm Roller diameter: 60 mm Frame: 85/35 mm Material: galvanized steel Up to 2 brake rollers per segment Stock: 20 units Price per unit Internal item number: 2026012602 Features: Condition: fully functional with signs of use Ideal for fast material handling Professionally dismantled and packaged Pick-up address: Industriestraße 5 (47918 Tönisvorst) The conveyor system was in operation until dismantling. Due to the excellent manufacturing quality, your material will glide smoothly to its destination, even under heavy loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for loading and unloading your goods! We are happy to prepare a customized offer for you or provide technical advice on planning and installation. Simply let us know your requirements and local conditions. Take advantage of our many years of experience and our outstanding network of specialists. We have already successfully completed projects for companies from various sectors, such as logistics, pharmaceuticals, trades, and the electronics industry. Together, we will find cost-effective and sustainable solutions to optimize your workflow and material handling. We can also offer you fully automated sorting systems or complementary components such as picking racks or containers. Hedpfx Apjydfuys Hjnn

Condition: used, sheet width - max. 200 mm plate thickness 6 mm flat steel 70 x 7 mm round bar steel 13 mm weight of the machine ca. 50 kg dimensions of the machine ca. 800 x 500 x 1800 mm Hjdpfx Aog Sx R Rsp Hsnn

Condition: used, mileage: 1,001 km, first registration: 01/1999, color: orange, driver cabin: other, gearing type: other, loading space volume: 16 m³, loading space length: 5,600 mm, loading space width: 2,300 mm, loading space height: 1,250 mm, Year of construction: 1999, Vehicle location: Bovenden, steel superstructure, flap Body: Bender tipper body approx. 16m³, hydr. flap opening, roof protection, Hardox body Frame width rear 770mm Body is dismantled from Daimler Benz SK 3544 8x8 ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Hnodpfsvhig Rex Ap Hon - .

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, • Year 2004 • In our possession since 06/2023 • Complete gripper setup, with two modified grippers for Ø14 and Ø16 • Automated pallets for Ø3-4-6-10-12 • Various grinding wheels for roughing and finishing, some new, for both metal and HSS • Parkair electrostatic dust extractor • New user interface keyboard (3-4 years old) • New workpiece rotation belt (to be replaced in 2025) • Less than 100 operating hours since 2023 • Dedicated Transor filtration tank, year 2007, maintained with filter replacement and complete functionality check, with service performed in 07/2023 (over €3000 + VAT), less than 100 operating hours since maintenance -separate sale can be considered- Hsdpfx Apjzcvako Henn • Price for machine + filtration system: €40,000

Condition: excellent (used), Year of construction: 2020, operating hours: 1,200 h, functionality: fully functional, machine/vehicle number: 808482, Excellent condition 2020 Rollomatic ShapeSmart NP50 CNC pinch & peel grinding machine. Fully operational and under power. Includes latest software package, Comat coolant filtration/temperature control system, Marcus checking system, loader pallet sets, ultra precision collets, grinding wheels, tooling and accessories. Immediate availability, inspection and demonstration welcome by appointment. The high-speed tool loader, designed by Rollomatic and integrated into the basic machine, was developed with fast setup and ease-of-use in mind. This is achieved by using pre-calibrated cassettes and clamps to hold different diameters without resetting the position. Rollomatic automatic loaders are known to be the fastest and most reliable in our industry. Fast to set up Capacity up to 1’000 parts Robust, low maintenance design Checking and measuring the part immediately after machining is essential to guarantee the quality of the production. The post-process measuring system immediately transmits the compensation value that may be necessary to achieve production within the planned tolerances. Accuracy & reliability Compensation of the grinding wheel position Constant production quality The Smart Touch Probe is a contact measurement system that allows the blank position to be defined before grinding and avoids variations during production. The system also compensates for machine thermal drift caused by changes in ambient temperature. Hnedpfxsy Udwvj Ap Hsn Runout compensation and core diameter measurement Setting assistance Superior stability during the production process Elimination of scrap during unattended production The StickSmart® is an automatic sticking system for in-process cleaning of grinding wheels. The «stick», mounted in a holder, is used to regenerate superabrasive grinding wheels to maintain their cutting performance. Extends the working life of the wheel Extends unattended production cycles with high-performance wheels Reliable and safe automatic process for the operator. Efficient, economical and safe solutionSimple and efficient, the right-side door has been designed to facilitate the work of the operator when changing the orientation of the grinding wheels. Ergonomics for the operator Secure opening Guaranteed tightness

Condition: excellent (used), Lasermax LX550 Roll Feed System with LX581 Module Roll-fed digital print finishing system Designed for continuous-feed digital printing applications Automatic web feeding and tension control Integrated touchscreen control High-volume production capability Suitable for transactional, direct mail and book production workflows Modular system design Made in Sweden Technical Data LX550 Power supply: 230 V, 1-phase, 50 Hz Power consumption: 1800 W Hsdpszaq Rfsfx Ap Honn Rated current: 10 A LX581 Power supply: 200–240 V, 1-phase, 50/60 Hz Power consumption: 1200 W Rated current: 10 A Circuit breaker: 15 A Machine Information LX550 Serial No: 09LX550034 LX581 Serial No: 09LX581002

Condition: used, functionality: fully functional, machine/vehicle number: 2550X10.14MM, control type: manual, degree of automation: manual, actuation type: mechanical, number of rollers: 3, roller (top) diameter: 300 mm, side roll diameter: 280 mm, roller diameter: 400 mm, roller length: 2,550 mm, working width: 2,500 mm, working height: 800 mm, sheet thickness (max.): 14 mm, sheet thickness stainless steel (max.): 10 mm, input voltage: 380 V, input frequency: 50 Hz, Equipment: centralized greasing system, cone bending device, emergency stop, swiveling upper roller, 3 roll 2500x14 mm Plate bending machine Model OMCCA ITALY CAPACITY plate width 2500 mm plate thickness 14 mm pre-bending 10 mm --- Useful rollers width 2550 mm Top roll d 300 mm Side rollers D 280 mm hard surface of the 3 rolls centralized gear unit side rolls driven Opening front hydraulic drop-end to unload the closed shell. Extended shafts to take installation of add-on molds for section bending Hnodpfx Asy Aubusp Hen Variable speed rolling up to 5 mtr/min power electric motor 20Hp on hydraulic unit console with electric push buttons commands. Dial gauge position rollers readout safety installations with emergency stop

Condition: good (used), Year of construction: 1990, machine/vehicle number: 0164390271794, Offer 26137 Hydraulic combination flat bar shear with notching device and punch press Technical data: - Flat bar shear - Blade length 360 mm - For flat material 350 x 13 mm Hedpfxsy Uwu Ue Ap Hjnn - or 230 x 20 mm - Profile steel shear - L-steel at 90° 140 x 13 mm - at 45° 70 x 7 mm - T-steel at 90° 70 mm - Round bar shear - Round steel 50 mm - Square steel 42 mm - Notching device - For material up to 12 mm - Right-hand notching up to 52 x 90 mm - Punch press - Punching force approx. 550 kN - Stroke, infinitely adjustable 0 - 60 mm - Punches holes in steel up to 30 mm diameter in 16 mm - Overhang 320 mm - Hydraulic drive 400 V / 5.5 kW - Two separate working cylinders and separate foot switches for each - Space requirement approx. W 1400 x H 1600 x D 750 mm - Weight approx. 1300 kg - Includes: - Various punches and dies in a separate tool cabinet - Support and stop table - Stop

Condition: used, Year of construction: 1993, Technical details: workpiece thickness - max.: 80 mm workpiece thickness min.: 5 mm plate size without being adjusted: 2000x1000 mm size of plate min.: 100x100 mm longitudinal travel: 2800 mm cross travel: 1000 mm control: CNC Mubea Matic100 hole diameter: min/max:10/40 mm tool taper: Kegel/cone/cono DIN 6327 bore spindle stroke: max. 150 mm positioning accuracy: +/- 0,5 mm spindle speeds:: 112-180-224-280-355-560 U/min traversing speed: 80 m/min feed length: max. 150 mm rapid traverse: 8 m/min work table:: L:2500;B:950 mm workpiece weight: 750 kg deburring device max.: d=40 mm work height max.: 1050 mm arm gripping device: 4 Stück/ pcs opening of gripping pliers min/max.: Typ I: 5/45 mm opening of gripping pliers min/max.: Typ II: 45/85 mm air-pressure connection: 6 bar total power requirement: 30 kw Weight approx.: 5,5 t space requirements approx. LxWxH: 5,0 x 5,5 x 2,7 (je nach Aufstellung) m - plate size with beeing adjusted also 1000x4000 mm possible - with roller conveyor 2x1000mm - material supporting table complete with supporting elements, guidance rail for guidance and transportation of the positioning wagons , cooling of the drill via air pressure Hjdpou Id Ruofx Ap Honn - control for 2 axis positioning x-axis 80m/min and y-axis 30m/min, - memory capacity approx. 10.000 programs - position wagon/carriage, 2 material support table, material standard gauge railway, - electric cabinet, control panel, hydr. aggregate accessories: - 1 position trolley, 2 material support tables, material web, control panel, hydraulic unit, deburring device Equipment: - 2 pieces drill sleeves, roller track 1800x1000mm and roller tracks 2x1000mm Machine is not under power and ready for transport. *