Used Roll Forming Line for sale (22,320)

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Complete P20 & P30 HVAC Duct Flange Profile Roll Forming Lines with Butyl Sealant System For sale is a complete set of two professional roll forming lines for the production of P20 and P30 flange profiles, used in the manufacturing of rectangular HVAC ducts and fittings. The set includes: - P20 flange profile production line - P30 flange profile production line Both machines are equipped with an integrated butyl sealant application system. Depending on production requirements, the profiles can be manufactured with or without factory-applied butyl sealant. This provides full flexibility and allows the finished profiles to be adapted to different duct manufacturing technologies and customer requirements. The machines perform the complete production process – from coil decoiling, through multi-stage roll forming, to automatic cutting of the finished profile to the required length. Technical highlights Laodpezx Rz Hsfx Amveg - 18 roll forming stations - Automatic PLC-controlled cutting system - Production speed up to 9 m/min without sealant application - Production speed up to 5 m/min with butyl sealant application - Integrated butyl sealant application system - Complete production lines for P20 and P30 profiles Both machines are in very good technical condition. Since new, they have been used exclusively for the production needs of our own HVAC duct manufacturing facility. They have not been used for continuous mass production of profiles for commercial sale, therefore their overall level of utilisation is relatively low. Both production lines are fully operational, properly adjusted, tested and ready for immediate production. The machines are offered as a complete P20 + P30 set, allowing the buyer to establish in-house production of the two main flange profile sizes commonly used in the manufacturing of rectangular HVAC ducts and fittings. Relocation and commissioning support We can provide technical assistance with dismantling and relocation of the machines. We can also support the buyer with installation, adjustment, testing and commissioning at the new production facility, helping to ensure that both lines are properly set up and ready for production after relocation. The machines can be inspected while in operation, and production tests can be carried out prior to purchase. The indicated price is NET and VAT will be added where applicable.

Condition: used, Year of construction: 1990, Heavy-duty rollforming line 10 stations Width: 260 mm Lajdpoymzzusfx Amveg

Condition: refurbished (used), ROLLFORMING LINE Lodpfjg Rkv Eox Amvoag

Condition: like new (used), Year of construction: 2024, functionality: fully functional, sheet thickness (max.): 3 mm, total width: 2,000 mm, total length: 14,130 mm, total height: 2,170 mm, input voltage: 380 V, power: 40 kW (54.38 HP), overall weight: 13,680 kg, We offer this used Huachen ROLL FORMING MACHINERY HC50-60X80-100-120 profiling line, manufactured in 2024. Model: HC50-60X80-100-120 Dimensions: 14130 × 2000 × 2170 mm Serial Number: 202408976 Power: 32.5 + 7.5 kW Weight: 13680 kg Manufacturing Date: 2024-08-12 Voltage: 380 V Frequency: 50 Hz Standard: YB/T 4249-2011 USED OMEGA PROFILING MACHINE – As good as new Technical features: • Production of Omega profiles 80 – 100 – 120 (see technical data sheet) • Automatic Omega profile changeover • Maximum workable thickness: 3 mm • In-line hole punching • Hole punching on the profile height • Complete profiling line, ready for use • High profile precision and repeatability Machine condition: Lasdpez D Dxgjfx Amvjg • Limited use: only 10 months of operation • Perfectly functional • Regular maintenance • Excellent mechanical and aesthetic condition Advantages: • Reduced setup times thanks to the automatic changeover • Ideal for medium to high production volumes • Excellent value compared to purchasing a new machine Available for inspection and testing. Technical documentation available. Attractive price.

Condition: good (used), functionality: fully functional, year of last overhaul: 2023, EN: For sale a complete and efficient line for profiling steel sheet from tape, e.g. Magnelis, into any profiles, e.g. type C, used in photovoltaic installations and farms, construction of steel halls, shelters as well as for furniture production, etc. Lodpou A U Utsfx Amveag The line with the unwinder is located in a heated hall in almost laboratory conditions, for the buyer the possibility of starting it up before purchase, I have contacts to companies that supply sets of profiling rollers for specific profiles as well as to companies dealing with the modernization of such machines in terms of its expansion, etc.

Condition: used, Year of construction: 2001, HEAVY DUTY ROLLFORMING LINE Laodpfxoy Rxzhs Amvog 11 STATIONS WIDTH: 450 mm FULL OVERHAUL

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: TEL-178600-558-98, working width: 1,250 mm, The production line was fully operational until it was dismantled. It was taken out of service solely due to a production upgrade/change in manufacturing technology. The machine is currently dismantled and prepared for transport; therefore, a live demonstration is not possible. Prior to dismantling, the line operated without any issues and was regularly maintained. We offer two complete roll forming lines for sale, available either individually or as a package. Manufacturer: SAMESOR Year of manufacture: 1998 SERIAL: TEL-178600-558-98 Laodpjzmzhmefx Amveg Manufacturer: AJV-MACHINE Year of manufacture: 2006 SERIAL: AJV24/1100-169

Condition: repair required (used), Year of construction: 2007, Roller profiling line for manufacturing profiles for dry construction, without a hydraulic unit. Location: In our workshop. Lsdpfozy Ekfex Amvsag

Condition: good (used), Schlebach Mini Prof Plus ☑️Immediately available, no delivery time☑️ Universal machine for the production of double standing seam profiles 25 from sheet material, coils, or cut-to-size pieces in a single pass. The machine is equipped with: ✅ Profiling rollers for 25mm seam height ✅ 230V connection ✅ A manual slitting shear RS for cross-cutting ✅ A slitting knife LS for cutting to width ✅ An electromechanical counter (accurate to the cm) ✅ Bending capacity: 0.8mm (zinc, aluminum & copper), 0.7mm steel sheet Condition: • Good technical condition • Good optical condition • Weight: approx. 315kg Lsdpfx Aszxrg Romveag An inspection and test run are possible by arrangement. The price is €14,250 net, plus VAT, totaling €16,957.50 gross. You will receive an invoice with VAT shown.

Condition: excellent (used), round gutter roll forming line: 14 stations. manual de-coiler, precutting. automatic measurement. Dx53d quality working. input 333mm Ljdpfx Aezyythsmvoag

Condition: new, Year of construction: 2025, Roll forming metal siding “double façade panel” machine SPM-2 Roll forming metal siding “double façade panel” machine SPM-2 is new design product of our company for façade and wall metal panels forming with the necessary configuration. These double façade panels are very popular in construction business of cladding residential buildings and industrial structures, for the construction of fences of various configurations, gazebos, roofing elements, etc. The SPM-2 metal siding production line is fully automatic and consists of a rolling part of the machine, an automation system and guillotine cutting shears at the machine exit. The line can have as additional parts a manual or automatic uncoiler for metal rolls, depending on the customer's needs. As standard version, this metal siding double façade panels roll forming machine SPM-2 makes a flat panel profile, but with the additional equipment, it is possible to roll panels with a microwave or rib shape profile. To start rolling, it is necessary to install a roll of metal to the decoiler and to put the end of the strip to the first rolling rollers of the equipment and feed it into them. After step by step, to put the metal to the next rollers, adjusting it if necessary. When metal comes to the cutting device of machine you need to feed metal into cutting knives and to make “zero” cut. After such step, equipment can move to automatic operation mode. The control panel of machine has the ability to set the number of tasks and the length of products, single tasks or to work in multitasking mode. After setting up necessary parameters the machine will automatically roll the metal cladding wall panels and cut them into necessary sizes. Thus, the customer will receive final product as quickly as possible and with the highest possible result. The roll forming speed is adjustable and can be up to 10-15 meters per minute. The SPM-2 metal wall cladding panels production line has special tools for punching out fastening holes on the side of the panel. It makes possible for the customer to get more interesting solution options and to offer a wider range of products to the end user. The rolling part of the machine has 18 pairs of forming steps, ensuring high quality of final product. You can get machine with protective cover or without it as per your request preferences. Specifications Laedexghngjpfx Amveg Material width (mm) 416 The material thickness (mm) 0,4-0,5 Engine power (kW) 3 + 1,1 Rolling speed (m/min) 10-15

Condition: good (used), DREISTERN P3.100 Profiling Line – 16 driven stations and 2 × 18.5 kW Short title for platforms with character limits: DREISTERN P3.100 Profiling Line, 16 driven stations Platform data * Machine type: Profiling line / Roll forming line * Manufacturer: DREISTERN * Model: P3.100 * Year of manufacture: not known / to be added before publication * Condition: used, dismantled * Control system: not available For sale is a DREISTERN profiling line, type P3.100, with 18 stations, 16 of which are driven. The line is equipped with 16 profiling stands, 50 mm working shafts, quick-change plates, and two Bosch motors, each with 18.5 kW. The modular design with mechanical quick clamps and quick-change plates is suitable as a solid mechanical base for customer-specific roll forming applications. A constructive expansion with additional stations is possible. According to the previous operator, the line operated flawlessly until it was dismantled at the customer's site. The control system is not available and is not included in the scope of supply. Recommissioning or control system adaptation by the buyer is therefore necessary. Machine bed and drive * Production direction: from left to right * Axle distance: 330 mm * 18 stations in total * 16 stations driven, with 16 gearboxes * Quick-change plates * Mechanical quick clamps * Coolant piping * 2 × Bosch motor, each 18.5 kW Profiling stands * Number in scope of supply: 16 pieces Ljdpfx Ajzzyd Nemvoag * Tool width per stand: 275 mm * Working shaft diameter: 50 mm * Working shaft connection: 30 mm with groove * Fixed lower shaft * Axial adjustment * Adjustment range lower to upper shaft: 80–170 mm Gearboxes * Worm gear ratio: 1:7.5 * Lower/upper shaft ratio: 1:1 Scope of supply * Machine bed with gearbox support * Infeed table * Pneumatic measuring wheel unit * Special straightening device * 16 gearboxes * 16 profiling stands * 2 Bosch motors, each 18.5 kW * 32 universal joints

Condition: like new (used), Year of construction: 2023, operating hours: 400 h, functionality: fully functional, machine/vehicle number: 2022LW160, High-speed roll forming line, equipped with tooling for the production of GELAN and SCHUCO metal profiles used in PVC window frame manufacturing. Machine achieves speeds up to 55 m/min with 6 m profile length production. Maximum processable material thickness is 2.5 mm. Upper and lower shaft diameter is 60 mm, the width between the stands is 360 mm, and each station is driven by an individual gearbox with two cardan shafts. Both upper and lower shafts are driven at each station. The line features 15 forming stands plus two straightening stands (Turkish heads). All forming rollers have a surface hardness of 62 HRC. Additionally, all auxiliary rollers and shafts in contact with the material are induction-hardened to 58–62 HRC (including run-out table rollers and horizontal accumulator rollers). A flying cut servo positioning system (DELTA 7.5 kW servo motor, ball screw, and linear guides) facilitates precise length adjustments via HMI. Hydraulic cutting system included. The run-out table features an automatic profile kickout, conveying, and separation system for continuous production without stopping. The horizontal entry accumulator for strip material ensures uninterrupted production, equipped with pinch rollers and individual drives. Double-sided hydraulic decoiler included. The line is equipped with a continuous ink-jet marking system from KONING (Germany). The automatic stacking system is not installed (see photos). The machine features recirculating cooling and lubrication across all 15 stations. Laodpfjyw Rzaox Amvsg Electronics: SIEMENS (PLC, contactors), SCHNEIDER (contactors), DELTA (Taiwan drives and servo). Main electric motors by Siemens. Bearings by SKF. The mechanical frame is stress-relieved and milled for precision. The machine has only been used for test production, having processed just 250,000 m of material (machine is nearly new). It is installed and connected to power; test runs can be arranged on-site. The listed price refers to the machine disassembled and loaded onto a truck. Included is comprehensive documentation with detailed tooling setup instructions for each profile (including detailed assembly drawings of rollers). Model: LW160 Supply voltage: 380 V Installed power: 73.5 kW (consumes only 40% of power when processing 2 mm strip) Frequency: 50 Hz Weight: 16,500 kg Current: 160 A Serial number: 2022LW160 Year of production: 2022 Year of on-site assembly: 2023

Condition: excellent (used), Roll former- Trapez T35/196 Ledpfozycn Iex Amvoag Input coils: 1000 mm, 1250mm Output: 1000mm thickness: 0.30-0.70mm 27 stations.

Year of construction: 2026, condition: new, Customized roll forming production lines for standard and special steel profiles with turnkey automation solutions. Bosporas Machinery is a manufacturer of coil processing and roll forming lines, delivering high-performance and customized industrial solutions worldwide. Our custom roll forming lines are designed for serial production of sheet metal profiles directly from coil with high precision, repeatability and production efficiency. We manufacture complete lines according to customer profile drawings, production targets and automation requirements. From standard profiles to fully customized sections, Bosporas provides turnkey roll forming solutions including coil feeding, punching, forming, cutting, stacking and automation systems. The systems can be equipped with advanced technologies such as quick cassette change, flexible punching systems, automatic width adjustment and servo-controlled feeding solutions. ⚙️ PROFILE TYPES & INDUSTRIES We manufacture roll forming lines for a wide range of industries and applications, including: Highway Guardrail Production Lines Acoustic Noise Barrier Production Lines Solar Framing & Mounting Profiles C, U and Z Profiles Cable Tray & Cable Ladder Profiles Logistic Warehouse Traverse Profiles Market Shelving Systems Suspended Metal Ceiling Profiles Solar Framing & Mounting Profiles Lighting Fixture Body & Lid Profiles Panel Radiator Top & Side Covers Lasdpoy Anxajfx Amvog Metal Grid & Industrial Profiles Metal Door & Door Frame Profiles PVC Window & Gypsum Board Profiles Vineyard / Orchard Posts Agricultural Equipment Components Automotive Industry Components Painting Plant Panel Profiles Household Appliance Components Coil Punching Applications Customized Special Profiles ⚙️ ENGINEERING FEATURES Custom machine design based on profile drawing High precision roll tooling design Servo-controlled feeding systems Quick cassette change options Automatic width adjustment options Flexible punching and perforation solutions Heavy-duty machine construction Modular design for future upgrades ⚡ OPERATIONAL ADVANTAGES Complete turnkey production solutions High efficiency serial production from coil Consistent product quality Reduced labor and production costs Flexible solutions for different industries Short lead time compared to European manufacturers 🏭 APPLICATION AREAS Construction industry Storage & logistics systems Solar energy sector Agriculture sector Automotive suppliers White goods industry Metal furniture systems Infrastructure projects General sheet metal manufacturing 🧩 OPTIONAL CONFIGURATIONS Fully customized profile design High-speed punching systems Automatic width adjustment Quick cassette change systems Special tooling packages Turnkey factory integration solutions

Condition: new, Year of construction: 2026, We have various kinds of ball grinding mill such as batch ball mill, rod mill, cement ball mill, mining ball mill, welcome to contact our team for further details according to your specific requirements. Lsdsq I Nw Ispfx Amvoag

Condition: excellent (used), sinus profile 15/75 input : 1000mm only output: 830 mm work automatically, with cutting scissors. Lasdpfxozyytuo Amvsg

Condition: excellent (used), Year of construction: 2018, Profiling machine Lajdpfx Aoztkw Dsmvjg

Condition: excellent (used), round Gutter. fi100 input material 333mm Ljdpfxjzyytne Amvjag dx53d quality of material automatic cutting machine works with air

Condition: excellent (used), Tile Imitation T-40/350 input coil: 1250mm output : 1114mm auto stacker Lasdpfszyytbjx Amveg 16 stations.

Condition: excellent (used), We offer this very good FACADE PANELL ROLL FORMING MACHINE German machinery Ljdpfx Amezyyr Djvsag Input: 250mm-600mm. Usually, we used to produce from 417mm input= output 310mm Micro design or flat design: 16 stations. The machine has two options for forming the final product. 1) with Fuge (space joint) and without Fuge (no space joint). so two sets of roll formers.

Condition: excellent (used), functionality: fully functional, We offer this very good FACADE PANEL ROLL FORMING machine. Input: 420mm Lodpfx Amezyclmsvsag output: 310mm Decoiler, 16 stations, automatic cutting.

Condition: excellent (used), Roll Former- Trapez t18/120 input coils; 1000mm ; 1250mm output: 835mm/1085mm Laodpfx Aszyyq Homvog thickness:0.3-0.70mm 20 stations

Condition: used, Year of construction: 1982, sheet width 480 mm plate thickness 3 mm stations 13 weight of the machine ca. 11 t dimensions of the machine ca. 15,x2 m Number of stations 13 Number of straightening stations 1 Waves 60 mm Center distance, horizontal 310 mm Center distance, vertical 110 - 250 mm Speed approx. 11 m / min. Connected load approx. 20 kW Uncoiler (without drive) - Coil- , inside 508/610 mm - Coil weight 3 t Laodpfx Asyqtx Hsmveg Flying hydraulic scissors Roller set for hat profile The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Schlebach SPA Profiling machine for continuous production of angle standing seams with a seam height of 25mm. The machine is equipped with: ✅ a hydraulic separating device for precisely perpendicular removal of the forming tools after profiling. ✅ millimeter-accurate length measurement Lajdpfxjzyy Rgj Amvjg ✅ a control system that includes length and quantity settings ✅ a collection container for waste ✅ a 400V power connection