Used Rummel Kunststofftechnik Gmbh Temp 90 W9 Ssr for sale (76,271)

Condition: new, Year of construction: 2025, TEMP 90 W9 SSR - DM General: -Temperature range, max. 90°C water -Robust steel sheet housing -Unit on rollers Hydraulics: -Submersible pump (manufacturer: Speck) with pressure/vacuum function (leak stop operation) -Qmax. 60 l/min. -Pmax. 3.8 bar -Tank and heating element made of stainless steel -Heating power 9 kW -Tank capacity 12 liters -Fittings made of brass/stainless steel -Automatic water refill -Electronic level control Ibedpfxsd Aathj Anmea -Indirect cooling system (plate heat exchanger) -Cooling capacity ~40,000 kcal/h (10 plates) -Display manometer -Integrated bypass -Solenoid valves for cooling and refill Electrical and control: -Electronic, self-optimizing PCB control -Electronic flow measurement -Control voltage within the unit: 24 V AC -Acoustic and visual alarm indicator -Solid state relay -Safety thermostat -Sensor break monitoring -Monitoring of hose rupture and leakage -Connection cable with plug -Dimensions: 295 x 575 x h495 mm -Weight: 40 kg

Condition: new, Year of construction: 2025, TEMP 90 W9 SSR General: -Temperature range up to 90°C water -Robust steel sheet housing -Unit on rollers Hydraulics: -Submersible pump (manufacturer: Speck) with pressure/vacuum function (leak stop operation) -Qmax. 60 l/min. -Pmax. 3.8 bar -Tank and heating element made of stainless steel -Heating power 9 kW -Tank capacity 12 liters -Fittings made of brass/stainless steel -Automatic water refill -Electric level control Ibodpjd Aarusfx Anmsa -Indirect cooling system (plate heat exchanger) -Cooling capacity ~40,000 kcal/h (10 plates) -Display manometer -Integrated bypass -Solenoid valves for cooling and refill Electrical and control: -Electronic, self-optimizing PCB control -Control voltage in the unit: 24 V AC -Acoustic and visual alarm indicator -Solid State Relay -Safety thermostat -Sensor failure monitoring -Monitoring of hose breakage and leakage -Connection cable with plug -Dimensions: 295 x 575 x h495 mm -Weight: 40 kg

Condition: new, Year of construction: 2025, General: -Temperature range max. 150°C for oil (heat transfer fluid) -Robust steel sheet housing -Unit on rollers Ibsdpfxoddv Ito Anmja Hydraulics: -Sealless submersible pump -Qmax. 60 l/min. - Pmax. 3.8 bar -Tank and heating element made of stainless steel -Heating power 9 kW -Tank capacity ~20 liters -Fittings made of brass/stainless steel -Manual oil filling -Mechanical level indicator -Indirect cooling system (tube bundle heat exchanger) -Cooling capacity ~40,000 kcal/h -Manometer -Bypass -Solenoid valves for cooling Electrical and Control: -Electronic PCB control -Solid State Relay -Safety thermostat -Sensor break monitoring -Connection cable with plug Available in approximately 4 weeks!

Year of construction: 2018, condition: good (used), COMERCIAL MARSE Spain MTR Smart 2 W9 SSR Tempering Controller 3 pieces for sale: 1x year 2018 - MTR Smart 2 W9 SSR 1x year 2017 MTR Smart 2 W9 SSR 1x MTR Smart 2 W9 SSR weight 50 kg/pc Ijdpfju Aq Hxjx Anmjba

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, input voltage: 400 V, empty load weight: 50 kg, input frequency: 50 Hz, Tool tempering heating: 9 kW. Temperature: 150°C. Ibodpfx Anjzab A Eomja

Condition: new, *Technical specification: -air-cooled, 25.5 kW referred to +10°C flow temperature at an ambient temperature of +32°C. -temperature range flow: +5°C to +30°C (optionally lower temperatures down to -5°C possible) -air flow rate: 8,000 m³/h -max. air inlet temperature: +30°C -Optionally with heating capacity up to 24kW *Pumps: -Delivery capacity up to 150 ltr/ min. -Delivery pressure up to max. 4 or 7 bar -Motor output 1.1 or 2.2 kW *Dimensions: -L/W/H: 1,450 mm x 750 mm x 1,680 mm -empty weight: approx. 480 kg -Circulation medium connection: DN 32 IG *Details & Highlights: -Internal refrigerant: R 123 a -Power supply: 380-425V/ 50Hz -Regulation and control unit SBC-T -Setpoint and actual value display, alarm display -Fully hermetic reciprocating compressor -Refrigerant receiver with safety valve according to DIN EN 378 -capacity control -frost protection monitoring -Flow monitoring -grid cover over condenser -oil sump heater -drainage device -Level monitoring by magnetic float switch -installed dirt trap in the return line in the circulating medium -overflow valve between flow and return as pump protection, fixed setting -high and low pressure limiter according to DIN EN 378 -stainless steel tank, capacity: 80 litres, open system completely insulated Self-supporting housing with castors, mobile -system for indoor installation Iodog Ewwropfx Anmsba -control box IP 54 Other performance classes are available on request. Visit our homepage for further details. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 1 790 58 450, turning length: 990 mm, turning diameter: 160 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 1,500 rpm, travel distance X-axis: 280 mm, travel distance Z-axis: 2,400 mm, spindle motor power: 30,000 W, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 100 m/min, rotational speed (min.): 1,500 rpm, rotational speed (max.): 4,500 rpm, total height: 2,950 mm, total length: 5,550 mm, total width: 2,550 mm, feed length X-axis: 280 mm, feed length Y-axis: 2,400 mm, feed rate X-axis: 30 m/min, feed rate Z-axis: 100 m/min, type of input current: three-phase, torque: 191 Nm, overall weight: 16,000 kg, chuck outer diameter: 215 mm, spindle nose: A6, mount diameter: 40 mm, Equipment: documentation/manual, rotational speed infinitely variable, Manufacturer: J.G. WEISSER SÖHNE GmbH & Co. KG Type: UNIVERTOR AS90/650RT General features: Machine type: Horizontal shaft turning center with pick-up loading Area of application: Complete machining of shafts and rotationally symmetrical components Loading: Pick-up automation Processing types: Green turning, hard turning, roughing, finishing Tool carrier: 12-way turret with electric drive (VDI 40) Additional options: Driven tools, rotary turning, NC-adjustable steady rest, measuring probe Main spindle: Spindle bearing diameter: 90 mm Spindle flange: A6 according to DIN 55026 Drive power (100/40% ED): 18/23 kW or 23/30 kW Nominal speed: 1,500 rpm Maximum speed: 4,500 rpm Torque (100/40% duty cycle): 115/146 Nm or 151/191 Nm Travel paths & axes: Max. turning diameter: 160 mm Max. chuck diameter: 215 mm Center distance: Max. 990 mm Travel paths X/Z axis: 280 mm / 2,400 mm Max. feed force X/Z (40% duty cycle): 10 kN / 8 kN Ibjdevxf U Eepfx Anmsa Max. travel speed X/Z: 30 m/min / 100 m/min Tailstock: Pressure force: 850 daN Centering center holder: MK4 Max. speed: 4,500 rpm Dimensions & weight: Machine dimensions (L×W×H): 5,550 × 2,550 × 2,950 mm Weight: 16,000 kg

Condition: new, Bee GTE-88/090/-08-V17-F pneumatic ball valve, 24V DC coil voltage, unused, 100% functional, scope of delivery as shown in the photos. Ibodei D T Iyopfx Anmsa

Condition: new, Factory-new electrically heated stainless steel agitator tank EBB90RWP Including operating manual and CE declaration of conformity. The double jacket is filled with thermal oil, which is heated by an electric heating element. Alternatively available with other agitator types and in other sizes. Volume: 97L Dimensions approx.: Ø 540mm x cylindrical height 625mm Total height: 910mm (+ agitator motor) Material: 1.4301 stainless steel (V2A) Surface: inside and outside finely ground (matte finish) Weld seams ground smooth Iedpfx Aneym Arbomeba Max. operating temperature: 110°C Operating pressure (tank): Atm - Upright design on castors - Top: folding lid, half bolted, half hinged, with removable stainless steel grating for reach-in protection - Bottom: flat base with lateral outlet DN50 DIN11851 and disc valve - Agitator flange on the top cover - 2x push handles - 1x nameplate Propeller agitator Power: 0.25 kW Speed: 980 rpm Operating voltage: 3PH 400V

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: SAPI Jumbo, pressure: 12 bar, total width: 3,087 mm, total height: 2,078 mm, total length: 3,692 mm, overall weight: 3,000 kg, inner dimension width: 2,340 mm, inner dimension length: 3,520 mm, inner dimension height: 2,500 mm, workpiece weight (max.): 500 kg, filter area: 20 m², Equipment: lighting, Efficient and Ready-to-Use JUMBO Blasting Cabin This fully assembled, walk-in JUMBO blasting cabin provides a comprehensive solution for efficient blasting operations. Equipped with two LED blasting lights, it ensures optimal illumination of the workspace. The double-wing door allows easy access and handling of larger workpieces, while the blast-resistant rubber lining on the walls protects the interior from wear and extends the cabin’s lifespan. For air filtration and dust reduction, the cabin features a high-performance cartridge filter and an impact separator, ensuring a clean working environment. The flat conveyor system in the floor, covered with a grated surface, enables the automatic return transport of the blasting media, while the electric drive unit for the conveyor system guarantees smooth operation. Additionally, the cabin is equipped with a bucket elevator and a high-performance abrasive recycling unit, allowing for efficient processing and reuse of blasting media. The 38-liter pressure blasting pot provides sufficient capacity for extended blasting cycles. The package also includes a 10-meter-long blasting hose and a durable boron carbide nozzle, ensuring optimal blasting performance. Ideal for Professional Blasting Operations This blasting cabin is the perfect solution for businesses that require a reliable and efficient system for blasting work. ✔ Custom features, such as loading trolleys, are also available upon request. Ibodpfx Ajukdfponmja ✔ Compressed air, electrical supply, and installation must be provided on-site. If you are interested or have any questions, feel free to contact us at any time!

Condition: new, Year of construction: 2025, functionality: fully functional, Our SAPI Blasting Halls SAPI sandblasting halls and systems with 50 years of tradition and proven quality. Sandblasting halls are designed for industrial and commercial use, providing a safe environment for all types of blasting work. They include a blasting room, an abrasive recovery system with a filter and dust extraction system, lighting, and safety features to ensure the safety of the operator. Recovery System Our recovery system collects, separates, and reuses the abrasive material, which reduces costs and environmental impact. Ventilation and filtration systems ensure that the air in the hall remains clean. Adequate lighting ensures optimal visibility for the operator. Key Components of Our SAPI Sandblasting Halls: ✅ Blasting Room: The central area where the actual sandblasting takes place. 🌬️ Ventilation and Filtration Systems: Reduce dust levels and ensure optimal visibility. 🔄 SAPI Recovery System: Recycles the abrasive material and reduces costs and environmental impact. 💡 Lighting: Ensures optimal visibility for safe operation. 🦺 Safety Features: Emergency shutdown, fire protection, and protective gear like helmets, overalls, and gloves. ⚙️ Control Panel: The control center that integrates all electrical components. 🗑️ Dust Collection Container: Collects fine abrasive material for easy disposal. 🛠️ Compressor: Powerful compressor for the compressed air supply. 💪 Mammut Sandblasting System: Designed for tough industrial use. Isdpfxsun R N Aj Anmjba Reasons to Choose Our Sandblasting Halls: ✅ High Efficiency: Increases productivity and reduces operating costs. 🛡️ Safe and Clean Environment: Minimizes environmental impact and ensures a safe working environment. ⚙️ Customizable Solutions: Tailored solutions for optimal performance. 🔧 High-Quality Components: Durable components that reduce maintenance needs. 🛠️ Support and Service: Expert support for quick problem-solving. 🌱 Environmental Responsibility: Reduces waste and environmental impact. The SAPI Flat Conveyor System: The abrasive material is processed by our efficient abrasive cleaner, which separates contaminants. The system is low-maintenance, operates without interruption, and consumes very little energy. It is easy to retrofit and can be installed on existing hall floors with minimal foundation work. Advantages of Our Flat Conveyor System: ✅ Low installation depth, retrofit-compatible with existing blasting rooms 🔇 Low noise and friction ⚡ Very low energy consumption 🏗️ Very low wear, as only rubber is used 🚧 Very low installation height

Condition: like new (used), Year of construction: 2018, operating hours: 100 h, functionality: fully functional, Equipment: documentation/manual, The conveyor belt from Kraus GmbH is for sale. It was previously displayed at a trade show and has the following technical specifications: New price of the belt: €7,000 Ibedeziuqgopfx Anmea Belt length: 2600 mm Belt width: 1200 mm (usable width) Overall width: 1300 mm Height: 800 mm - 950 mm Mobile Load capacity: 100 kg Belt speed (constant): 2 m/min Conveyor surface: Modular belt, PP/gray, with FDA approval (suitable for medical/food applications) Gear motor: SEW 230/400V Frame made of galvanized profiles with bolted connections.

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 20-3443, input voltage: 400 V, total width: 2,286 mm, total length: 11,994 mm, total height: 2,582 mm, temperature: -80 °C, type of input current: three-phase, cooling capacity: 12 kW (16.32 HP), input current: 63 A, ambient temperature (min.): -20 °C, input frequency: 50 Hz, ambient temperature (max.): 42 °C, For sale is a mobile, redundant, low-temperature storage unit in a container design, consisting of an antechamber with an operating temperature of -20 °C and a storage room with an adjustable temperature up to -80 °C. Technical data Storage temperature (adjustable): up to -80 °C Permissible ambient temperature: -20 °C to +42 °C Number of refrigeration circuits: 4 Sound pressure level (1 m free field): 73 dB(A) Refrigeration circuit – Stage 1 Refrigerant: R449A (GWP: 1,397) Number of compressors: 2 Compressor type: semi-hermetic reciprocating compressors, frequency-controlled Refrigeration circuit – Stage 2 Refrigerant: R508B (GWP: 13,396) Number of compressors: 2 Compressor type: semi-hermetic reciprocating compressors, frequency-controlled Condenser Number of condensers (Stage 1): 2 Heat output per condenser: 35.0 kW Fans per condenser: 2 Fan type: EC fans, speed-controlled Nominal air flow rate per condenser: 8,800 m³/h Ibsdszg Dtxspfx Anmea Electrical data Power consumption at operating point (total): 24.2 kW Current consumption at operating point (total): 43.9 A Recommended fuse rating: 2 × 63 A (CEE connector, redundant) Power supply: 400 V / 50 Hz / 3-phase + N Control system PLC: Siemens S7-1214C x 2 Operating panel: Siemens TP900 Comfort, 9 inches, 16.7 million colors x 2 Operating languages: German and English Inspection An inspection of the system is possible at our factory at any time by prior appointment. Upon request, the system can be put into operation during the inspection so that you can be convinced of its function and performance.

Condition: refurbished (used), Year of construction: 2010, operating hours: 5,600 h, functionality: fully functional, machine/vehicle number: 2.519, year of last overhaul: 2026, protection type (IP code): IP65, ejection height: 1,100 mm, nominal power: 4 kW (5.44 HP), operating pressure: 6 bar, operating temperature: 80 °C, working range: 950 mm, rotational speed (max.): 1 rpm, rotational speed (min.): 1 rpm, temperature: 80 °C, total height: 700 mm, compressed air connection: 6 bar, BvL cleaning system, Model Ocean RW 900 S. Optional features such as filter technology, etc., are still available. Ijdpfxezf Hm So Anmjba

Condition: like new (used), For sale is the stirrer motor FCA 90L - 6 from AC-Motoren GmbH. Product data: 910 - 1092 rpm 240 - 480 V 1.1 - 1.32 kW Ibsdpfxofv Ezuj Anmja 450mm shaft length 240mm flange diameter

Condition: used, Year of construction: 2005, operating hours: 71,080 h, functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 65,000 m/min, feed rate Y-axis: 65,000 m/min, feed rate Z-axis: 65,000 m/min, total length: 8,000 mm, table length: 4,050 mm, table width: 2,050 mm, total width: 7,500 mm, spindle speed (max.): 22,000 rpm, total height: 6,200 mm, table height: 500 mm, rapid traverse X-axis: 65 m/min, rapid traverse Y-axis: 65 m/min, rapid traverse Z-axis: 65 m/min, position of the milling head: vertikal, torque: 28 Nm, tool weight: 6,000 g, control cabinet length: 600 mm, control cabinet height: 2,600 mm, control cabinet width: 4,200 mm, tool diameter: 100 mm, As the manufacturer, we are pleased to offer this gantry milling machine from FOOKE GmbH. This machine perfectly combines dynamics with precision, making it an ideal choice for machining large components. Key Benefits of Buying Directly from the Manufacturer: Retrofit Options Available: Upon request, we can provide a customized retrofit to perfectly adapt this machine to your future production requirements. Spare Spindle in Stock: Minimize downtime – a matching replacement spindle is currently in stock at our facility and immediately available. Technical Specifications General Information: Machine Type: 5-Axis Gantry Milling Machine Model: ENDURA® 907.2LINEAR Year of Manufacture: 2005 Control Unit: Siemens SINUMERIK 840D Availability: Immediately Travel & Working Range: X-axis travel: 5,000 mm Y-axis travel: 3,000 mm Z-axis travel: 1,500 mm Max. Workpiece Dimensions: 4,000 x 2,000 x 1,000 mm (L x W x H) Milling Head & Main Spindle: Tool Taper: HSK63A Max. Spindle Speed: 22,000 rpm Spindle Power Capacity: 30 kW Max. Torque: 28.6 Nm A-axis (swiveling): 220° (+/- 110°) C-axis (rotating): 365° (+/- 182.5°) Tool Changer & Dynamics: Magazine Capacity: 20 stations (for HSK63 Form A tools) Max. Tool Diameter: 100 mm Max. Tool Weight: 6 kg Rapid Traverse (X/Y/Z): 65 m/min Feed Rates: up to 65,000 mm/min Dimensions & Weight: Total Power Requirement: 150 kW Machine Weight approx.: 78 tons Footprint / Dimensions approx. (L x W x H): 7.5 x 8.0 x 6.2 m Additional Equipment Included: Head Extraction System: Equipped with an integrated head hood, designed for connection to an on-site extraction system. NC4 Laser System: Non-contact laser tool inspection and breakage detection system. RMP60 Wireless Probe: Radio-transmission workpiece measurement system by Renishaw. Ibjdpfxozcb D Ue Anmea Roller Blind Covers Contact Us Do you have any questions or require further information regarding a tailored retrofit? Please feel free to send us a message through the platform or give us a call. As the manufacturer, we look forward to assisting you!

Condition: good (used), Year of construction: 1999, Approx. 23 units of OTTO hazardous goods containers, 600L, Large Packaging "IBC" – used: Price per unit ex-location: €395 (net)! Manufacturer: Otto Containersysteme GmbH Model: 11A/X/01/99/D/OTTO/BAM 0356/2556/1090 Serial number: 33782 Year of manufacture: 1999 Capacity: 600L Tank material: St. W 24 Iodpfx Aswzyn Denmsba Maximum permissible gross mass: 1,090 kg Tare weight: 190 kg With certification as Intermediate Bulk Container (IBC) for national (GGVS/GGVE/GGVS) and international (ADR/RID/IMDG Code) transport of dangerous goods of packaging groups I, II + III (X rating) * Dimensions per DIN 30741 * Steel container, hot-dip galvanized * With hinged, lockable lid * Lid locks in place by special spring mechanism at any opening angle up to approx. 70° * Container with continuous body, only 2 closures on the front * With forklift pockets, safety hooks for PE bags, type plate and compartment Condition: good Available: immediately Location: D-06766 Bitterfeld-Wolfen

Condition: new, Year of construction: 2025, PROFILE BENDING ATTACHMENT PB20 The PB20 profile bending attachment is the optimal supplement for tube bending on the 3000 and 6000 models. The device can be easily and quickly mounted on the bending shaft without the use of tools. The workpiece is clamped onto the turntable with the clamping device and pulled around the bending tool. With this system, leg lengths to be bent can be accurately measured in conjunction with a length stop and can be bent with repeatable accuracy. TECHNICAL DATA: - Bending capacity steel 37: 100 x 10 mm, Ø 20 mm. - Many standard tools available - Special tools possible - Sharp-edged tools with bending radius R2 or 5 mm - round tools R 10 to 25 mm for bends max. 260° optional OUR SERVICE: - Welcome to the test production in our house in the demo room Isdpfx Anjnh R Ekjmeba - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, actuation type: electric, pipe diameter (max.): 100 mm, pipe length (max.): 6,000 mm, tube wall thickness (max.): 8 mm, bending angle (max.): 195 °, pressure (max.): 250 bar, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, emergency stop, foot remote control, quick-change device, THE ECONOMICAL MANDREL BENDING MACHINE FOR TIGHT BENDING RADII. For tube dimensions from 20 - 90 mm, this bending system offers solutions for complex geometries with standard radii of 2xD. Depending on material quality and wall thickness ratio, radii of 1.5xD can also be realized suitable for series production. With a tool height of 120 mm, there are also sufficient options for special profiles. The extremely precise and powerful electric drive of the bending axis as well as the stable and rigid construction of the mandrel carrier and the bending arm also contribute to the desired bending result. Isdpfxonh R Sus Anmoba The plug-in bending tools allow a quick changeover to other tube dimensions. The clamping pressure for the tube clamping can be optimally adjusted. The PLC control (can be expanded as required via USB stick) with data memory and the latest X2X interface can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for a maximum of 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The control system has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. Also available with pneumatic rotation stop or with gear-assisted length and twist positioning. POSSIBLE AREAS OF APPLICATION: - Plant engineering, e.g. chemistry - hydraulic piping - metal construction- prototype construction- pipeline construction TECHNICAL DATA: Bending capacity 7000: Ø 20 to 70 x 5 mmbending capacity 9000: Ø 20 to 90 x 5 mm depending on the material- bending radius min/max: 40 mm/250 mm- Bending radii min: 1.5 x Ø (standard 2 x Ø ) - Multifunction machine control Bending angle adjustment (0,1°) - Mandrel support lengths 3000/4500/6000 mm - Maximum 180º bending result - Weight 1600-3200 kg (depending on version) - Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: - Automatic mandrel lubrication (minimum quantity) - Pneumatic or hydraulic quick chuck - Larger bending radius up to 300 mm - Positioning of the length and twist via automatic brake function or via manual stops by foot switch - Semi-automatic positioning of the length and twist via servo motors - Automatic tool retraction - Pipe calculation software - 10 inch touch screen with integrated tube calculation - Data transfer via cable (LAN), via radio (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via - the company JUTEC - Service contracts, maintenance at your site

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, total length: 2,600 mm, total width: 600 mm, total height: 1,300 mm, motor manufacturer: Stöber Antriebstechnik, Equipment: type plate available, -KOM 3172- Offered here is a hinged belt conveyor from Frasch GmbH&Co. KG. The conveyor belt has breakout areas on the hinged belt, which can be seen in the photos. The functionality has been tested. This hinged belt conveyor was used for transporting plastic components. Ibjdpox Ifqdjfx Anmja Type: FGA LU: 1900/LA: 1100xW:300 Power: 0.37 kW Year of manufacture: 2016 Total length: approx. 2600 mm Total height: approx. 1300 mm Total depth: approx. 600 mm Usable belt width: approx. 265 mm Spacing between carriers: approx. 490 mm

Year of construction: 2016, condition: as good as new (ex-display), 1 piece. Heavy-duty gearbox Manufacturer: NORD DRIVESYSTEMS Type: SK9082.1/52 1 piece, left-hand version Shaft diameter 110 mm, shaft length 210 mm Isdpfxjh Igwhe Anmoba M/2 12000 Nm i123.13 Overall dimensions (horizontal mounting): Length 1200 mm Width (with shaft 210 mm) 600 mm Height 600 mm Weight per unit: 620 kg Like new, only test run. Can be mounted horizontally or vertically.

Condition: as good as new (ex-display), Intake opening: 2000 x 1900 mm Motor power: 2 x 75 kW Rotor flight circle: Ø 600 mm Rotor speed: approx. 84 rpm Ibedpocb Dttofx Anmsa Cutting system: 152 cutting inserts 40x40x20 mm on toolholders Screen perforation: with this Screen perforation is for achieving the security levels P2 to P5 Counter knife: with cutting gap adjustment Machine weight: approx. 21.000 kg Machine number: A 32

Condition: new, Year of construction: 2025, machine/vehicle number: 60919029293, This UV printer replaces conventional laser printers – it also enables color printing on glass, wood, textiles, plastics, metal, and many other materials. New model: PS6090 Max Pro The speed champion! Printing area: 70x100 cm Printing height: 150 mm Vacuum air table Water circulation system Print head: 3x Epson TX800 (CMYK + CMYK + WWWW + VVVV - 18 channels) Ijdpfx Aefvyagsnmoba 720x1080 / 720x1440 / 720x2160 dpi Includes software for printer control and image editing Dimensions: 1900x1600x1220 mm Weight: 400 kg

Year of construction: 2020, condition: new, A fully automated film rewinding machine according to GMP guidelines. Foil rewinding machine type FUM-900 CP This film rewinding machine is used to rewind film rolls that have run in large systems or are not wound with the correct winding tension, and thus to prepare them for further processing. It was designed according to the special pharmaceutical guidelines and for the processing of PVC film. Advantage of our machine: with two separate drives, we can guarantee both right and left winding. Technical details: Width: 1,600 mm Depth: 850 mm Height: 1,100 mm Materials: In contact with the product: 1.4301 / acrylic Iodpfefwfpbsx Anmsba Performance: up to 120 m / s Speed: infinitely variable Ø film rolls: max. 450 mm Connection: 230 V / 50 Hz Drive: direct current 0.25 kW

Condition: good (used), Year of construction: 2009, Tooltemp TT 390 A 360° Öl 18 KW Öl Iedoxwch Aepfx Anmoba year 2009 price: 2.850 € contact: Mr. Rainer Eckerle