Used S.c. Arghir Prodex S.r.l. Forte Plus for sale (6,456)

Condition: new, Motorised concrete block machine Production of concrete blocks for use in: masonry, foundation, pillars, floors and chimneys. Powerful hydraulic pressing Operator seat Concrete bunker – 500 liters Automated lift of the counter mold Mold maximum dimensions: 1200x400mm Maximum height of concrete product: 200mm Cycle duration: 45 seconds Installed power: 5.5kW Supply voltage: 380V Fpjdpfx Ashx N Nmofuen Overall dimensions: 2.2 x 2.0 x 1.85m Mass (including mold): 2000kg Vibrator motor rotation frequency: 3000rpm Dry concrete consumption: 4 cubic meters/hour

Year of construction: 2023, condition: new, 1.) Applications: Production of concrete blocks for: masonry, foundation, pillars, floor, belt, chimneys; gutters and gutter covers; 2.) Advantages: - High productivity - the active surface of the mold 1200 x 800mm (12 masonry blocks 400x200x200mm) - Hydraulic actuation - Teflon bushing of the sliding bearings on the guide columns - Reliable mechanical and hydraulic systems. - Operator seat - Concrete hopper – 700 liters - Drawer for concrete supply to the mold – hydraulically operated - 2 vibrators on the punch plate - 4 electric motovibrators - mold vibration - Automatic stop of vibration when unpacking - Polyurethane coated wheels + Hydraulically actuated wheel to change the direction of travel - Large variety of molds - Allows the installation of molds with a height of 370mm - can produce roadable ditches and open ditches 3.) Technical characteristics: - Maximum mold dimensions: 1200x800mm - Maximum finished product height: 370mm - Duration of a cycle: 60 seconds - Hopper capacity: 700 liters - Installed power: 15 kW Fpodpeiwxrgofx Afuon - Supply voltage: 380V - Overall dimensions: 3.30 x 2.30 x 4.00m - Mass of the machine (with mold): 4000 kg - Vibration frequency: 3000rpm - Required amount of semi-dry concrete: 8 m3/hour - Recommended mixer: SAB6MC automated concrete station

Condition: new, Applications: Production of concrete blocks for wall, foundation, pillars, roofs, chimneys. Production of concrete pieces for water drainage Advantages: optimal distance between the mould and the over-mould ensures a comfortable position for the operator - Handling the steering wheel requires minimal effort thanks to a gear force reducer; Fpodpfeiwut Tsx Afuon - Simple operation and maintenance professional vibrator with low power consumption Automated stopping of the vibration once demolding occurs Wide variety of molds - there is the possibility of installing moulds for high concrete elements (maximum 370mm)* Technical specifications: Maximum mold dimensions: 800x500mm Maximum height of end product: 370mm Cycle duration: 60 seconds Supply power: 0.28kW Supply voltage: 220V Overall dimensions: 1.35x 1.55 x 1.7 m Machine weight (including a mold): 400 kg Vibrator rotation speed: 3000rpm Concrete consumption: 2 m3/hour Recommended concrete mixer: MX300L

Year of construction: 2024, condition: new, ~ SPEED 700 , SEMI AUTOMATED ~ APPLICATIONS Production of: - paving - kurbs - concrete blocks for: -masonry -foundation blocks -posts, floor slabs -chimneys, -gutters -roadway gutter covers. ADVANTEGES : - Vigorous vibration coupled with hydraulic pressing of the concrete guarantees high quality concrete products. - Vibrators mounted on the counter mold play an important role in concrete compaction. - Chrome-plated pipe guide columns Fsdpohufyhofx Afuspn - Teflon-coated sliding bearings - Our wide range of molds can provide a diverse production. - Reliable mechanical and hydraulic systems. OPERATE : ~ Mostly manual: -Drawer(back/ fort -Mold (up/down) -Counter Mold (up/down) ~ Commands executed automatically: -start/ stop vibration when reaching height -start/ stop pallet feeding exhaust line stop) COMPONENTS: 1.) the press 2.) pallet stacking space 3.) pallet feeding line 4.) concrete bunker 5.) drawer (1) for concrete mold feeding 6.) pallet discharge line with fresh products 7.) hydraulic unit 8.) lever panel for the machine operator TEHNICAL FEATURES: - Pallet dimensions: 700x670x40mm - Active surface: 640x640mm - Minimum/maximum finished product height: 40mm/ 250mm - Vibration frequency: 3000rpm - Hydraulic pump flow: 40 l/min - Cycle time: 60 -100 sec (Semi-automatic version) - Cycle time: 30 – 50 sec (Fully automated version) - Installed power: 15.50 kW - Hydraulic power unit: 7.5 kW - Vibrating table vibrators: 6.00 kW + 0.28 kW - Counter mold vibrators: 0.80 kW - Discharge line: 0.55 kW - Supply voltage: 380V OVERALL DIMENSIONS: Width: 1.60m (without hydraulic unit and control panel) Length: 5.60m Height: 2.85m Machine mass (without mold): 4,000 kg Approx. mold mass: 250 - 300kg ADDITIONAL PRODUCTS / OPTIONAL: 1.) AUTOMATIC OPERATION : ( + 6.300 euro ) - PLC (Mitsubishi Electric) logic programmer + touch display + software for automatic machine operation Reduces the time of a production cycle, higher productivity (30 -50sec) 2.) SECOND DRAWER (2) for finishing layer for paver and kurbs + BUNKER ( + 3.900 euro ) 3.) CONCRETE MINISTATION SEMIAUTOMATED ( + 18.800 euro) Component parts: a.) Sand bunker 2 m2 + Volumetric dosing with conveyor belt + Vibrator b.) Gravel bunker 2 m2 + Volumetric dosing with conveyor belt c.) Electric control panel d.) Concrete Mixer MX 300 ( Fluid concrete: 300 liters Semi-wet concrete: 200 liters, 2.4 cubic meters of semi-wet concrete/hour ) 4.) AUTOMATIC LIFT (elevator) ( + 4.000 euro) 5.) CONVEYOR 6M , for transporting the concrete to the machine bunker ( + 4.000 euro) - Band width: 500mm - 7mm smooth rubber mat with 3 inserts - Motor 1.5kW (380V) PLEASE FOR THE COMPLETE OFFER SEND US AN EMAIL.

Year of construction: 2023, condition: new, Machine equipped with complete formworks (rotating hade, 5 steel rings, outer formwork) for pipe with diameters: Dint=1000mm si Dint=800mm; - The equipment can manufacture unreinforced concrete pipes with connection sockets: Dint=1000mm; Dint=800mm; Dint=600mm; Dint=500mm; Dint=400mm; Dint=300mm; - Maximum height of pipe: 1000mm; minimum height of pipe: 250mm - Vertical translation of the rotating head – electric engine - Variable revolution of the rotating head (frequency converter) - Sizes: 2.0x2.0x4.2 meters - Mass≈2000 kilograms - Power: 16 kW (supply voltage: 380V) - Average productivity: 1 pipe / 6 minutes - Loading of the machine with concrete: manual; (optional – by conveyor belt) - Manipulating the formwork with the concrete pipe inside: with the forklift; - Recovery of the formwork: immediately. - Recovery of the ring: after 2-3 days, depending on the ambient temperature. - The frequency converter allows adjustment of speed according to the inside diameter of the pipe. - Changing the rotating head is simple and fast. - Rotating heads are lined with interchangeable wear resistant steel sheets. EQUIPMENT REQUIRED: Fedpsiy Dl Hjfx Afuepn - MX500L Concrete Mixer with aggregate loader: concrete preparation - Conveyor: transport of concrete from the mixer to the formwork. Steel rings for the lower plug - The production surface must be perfectly flat!

Condition: used, Year of construction: 2020, total length: 3,000 mm, total width: 1,300 mm, total height: 1,900 mm, Veneer press Manufacturer: Stema S.r.L. Type: P – 90 C Year of manufacture: 2020 Dimensions (l/w/h): 3,000 x 1,300 x 1,900 Weight: approx. 3,800 kg Pressing force / pressure: 70 – 90 t Purchase price (net): €16,000 plus applicable VAT. VAT will be shown separately on our invoice. Note: The equipment description is taken from the original purchase invoice and has not been checked for accuracy or completeness. Deviations are possible! Financing possible Upon request, we can arrange suitable financing through our company. Please do not hesitate to contact us. Subject to changes, errors and prior sale. Sale is made without guarantee or warranty and only to commercial businesses. Fpedpfx Asz Ip H Refuen Inquiries will be processed from Monday to Friday between 8 a.m. and 4 p.m.

Condition: new, COMPONENT PARTS: 1.) Sand bunker 2mc: -Volumetric dosing with conveyor belt - 1.5 kW motor -Vibrator 0.18 kW - Gravel bunker 2 m2 -Volumetric dosing with conveyor belt - 1.5 kW motor 2.) Electric control panel: „ Start/stop mixer „ Start sand conveyor- the conveyor will stop after the preset time from the time relay " Start gravel conveyor - the conveyor will stop after the preset time from the time relay „ Water quantity setting (digital display) 3.) MIXER, MX500 / MX300: -The tub is lined with an interchangeable jacket made of hardox sheet 4mm; -Padded bottom with removable wear elements (10mm) - Interchangeable mixing hoes made of hardox sheet -Protective net MX500: -Useful volume: fluid concrete 500 liters -Precast concrete: 350 liters -Productivity: 3.5 cubic meters of semi-wet concrete/ hour -Engine power: 11 kW (380V) -Dimensions: 1.70 x 1.70 x 1.40 m - Mass: 900 kg MX300: -Useful volume: fluid concrete 300 liters Precast concrete: 200 liters -Productivity: 2.4 cubic meters of semi-wet concrete/hour - Engine power: 5.5 kW (380V) - Dimensions: 1.40 x 1.40 x 1.40 m - Mass: 650 kg OPTIONAL PARTS: 1.) WEIGHING CEMENT: -Steel funnel with pneumatic opening; -Compressor; -Pneumatic vibrator; -Load cell; - Digital weight indicator - mounted on the electrical control panel. -Auger for cement (connects to the bulk cement silo of the client or at the silo provided by our company) Fsdpfxsiz Dl Is Afuspn -Mixer cover for blocking cement dust 2.) CEMENT SILO -Capacity: 24 cubic meters (30 tons of cement) -The silo is equipped with a ladder, a railing on the lid and a supply pipe with a quick coupler. -The silo is equipped with a filter, pressure release valve, level indicators, fluidizers and a butterfly valve on the discharge mouth. -Inner diameter 2500 mm; -The height of the cylindrical ferrule 4500 mm; -The height of the conical bottom 1700 mm; -Total height, including railing 8700 mm. - Net mass: approximately 3000 kg. THE MACHINERY ARE NEW. The warranty period for the machines is 12 months from delivery.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, cutting height (max.): 400 mm, Offer for automatic bandsaw SBA 361: P-CNC-FORTE-SBA361 Fpedpfx Aet I Emvofusn Dear Ladies and Gentlemen, We are pleased to be able to offer you our high-quality FORTE SBA 361 automatic band saw from 2002. The machine is in used condition. Technical data - Maximum workpiece diameter: 400mm - Feed roller conveyor - Automatic with bar feed - Space requirement approx. (height/length/width): 270 cm / 500 cm / 300 cm Price net 26.000 € VHB

Condition: used, This listing is for a ENVAIR Safe Comfort Plus Safety Cabinet Fjdpfx Afsxzgzzoujpn

Condition: used, Year of construction: 2011, functionality: fully functional, type of input current: three-phase, input voltage: 380 V, power: 9 kW (12.24 HP), We offer for sale a used LINKS S.r.l. automatic zig-zag cotton wool production and packing line, manufactured in Italy in 2011. Manufacturer: LINKS S.r.l., Italy Year of manufacture: 2011 Line configuration: Z/AP + ASA + L/CC Serial numbers: 300–301 The line is designed for the automatic production, zig-zag forming and packing of absorbent cotton wool in polyethylene bags. Technical specifications: Capacity: up to 25 packs/min at 100 g (approx. 1,500 packs/hour) Electrical power: 9 kW Power supply: 380 V / 50 Hz / 3-phase Operation: fully automatic cycle Operators required: 1 Packing/product formats: 50 g, 100 g and 200 g Equipment includes sets of forming/packing chambers for 50/100 g and 200 g Original technical documentation included Fpodpfx Afszxnyyeuon The line consists of the Z/AP + ASA + L/CC units, covering the zig-zag forming, conveying and pressing stages and automatic packing process. Suitable for production of absorbent cotton wool, medical cotton wool and cosmetic cotton wool. The equipment is sold as used machinery. Further technical information, photographs and original documentation are available upon request. Please contact us for additional information, inspection arrangements or further photographs.

Year of construction: 2002, condition: used, functionality: unexamined, machine/vehicle number: 2123, TECNOMACO ITALIA / FAMAR AP60 Blister Packaging Machine – Year 2002 TECNOMACO ITALIA S.r.l. – FAMAR AP60 Fodpfjzvycnex Afuepn Italian Blister Packaging Machine Year: 2002 Professional industrial blister packaging machine designed for the packing of tablets and capsules in PVC/ALU blister packs. The machine is supplied with: -1 size part for tablets -1 size part for PVC/ALU blister packs, Configuration for 10-cell blister packs, Tooling suitable for capsules size “0” -Blister camera control system which costed 12200 eur in 2018 ) for automatic product inspection and verification inside the blister packs. Camera system installed in a dedicated stainless-steel protective enclosure mounted directly on the blistering machine Stainless-steel construction suitable for pharmaceutical and food-supplement production environments.The integrated camera control is designed to perform a product presence and blister inspection check, helping identify missing, incorrectly positioned, or potentially defective products before the blister packs proceed further in the packaging process. The FAMAR AP60 is a robust Italian-built blister packaging solution suitable for pharmaceutical, nutraceutical and food-supplement production, offering a compact and professional solution for PVC/ALU blister packing. Manufacturer: TECNOMACO ITALIA S.r.l. / FAMAR Model: AP60 Country of manufacture: Italy Year: 2002 Blister format included: PVC/ALU, 10 cells Capsule tooling included: Size “0” Additional tooling: One size part for tablets Inspection system: Blister camera control with stainless-steel protective housing Condition: Used industrial equipment. Sold as seen.

Year of construction: 2010, condition: excellent (used), functionality: fully functional, 1 x Giemme Thermo Packaging Machinery S.r.l. semi-automatic shrink bundling machine. Manufacturer – Giemme Thermo Packaging Machinery S.r.l. Model – ALTAIR 70 P. Serial number – 001.041.10. Date of manufacture - 2010. Speed – up to 12 packs/minute. Electrical supply – 400 V / 50 hz / 3 phase. Power – 20 kW. Overall dimensions – 3000mm long x 1200mm wide x 2000mm high. Fpedpfeyzxgfex Afusn

Condition: excellent (used), Year of construction: 2017, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 2017.041.XM.400.004, space requirement length: 6,700 mm, space requirement width: 3,200 mm, space requirement height: 5,000 mm, This is a combination of a hot mixer and a cooler. A typical application is mixing polymers with additives. Hot mixer: working volume of 400 liters, drive power 90 kW, mixing impeller with a tip speed of up to 60 m/s. Vacuum system included (but needs optimization). Filling hopper included. Gravimetric scales for the additives are not included in the delivery. Cooling mixer, volume 1200 liters with a 11 kW drive, cooling jacket for cold water flushing, outlet with a valve. The combination includes the entire steel structure with walkways, control cabinet with frequency converter (400 VAC/50Hz) for the variable drive of the hot mixer. Additional documents can be provided upon request. The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. Fsdezl Td Ropfx Afuepn The details for optimal transport need to be clarified. The machine price is quoted without packaging on a pallet.

Year of construction: 2014, condition: excellent (used), functionality: fully functional, Complete 'Bag-in-Bag' forming system, previously used to produce multipacks of crisps. System comprises of: 1 x Feed hopper and steps/gantry. 1 x Comek s.r.l. infeed swan-neck / 'Z' conveyor. Manufacturer – Comek s.r.l. 1 x Comek s.r.l. / Propema VPB 400 vertical form, fill and seal bagging machine. Manufacturer – Comek s.r.l./Propema S.r.l. Date of manufacture – 2014. Sealing jaws - 380mm horizontal & 620mm vertical. Film width - up to 810mm wide. 1 x Markem Imaje SmartDate X65 128mm thermal transfer printer. Manufacturer – Markem-Imaje. Date of manufacture – 2021. 1 x Flash label applicator (never used / required for seller's products). 1 x Hole punch (3mm) to help deflate the multipack bags into large boxes. 1 x Comek s.r.l. outfeed inclined conveyor. Manufacturer – Comek s.r.l. Belt width - 400mm wide. Conveyor length - 1800mm long. 1 x 1.2m diameter stainless-steel Lazy Susan / rotary packing table. Height - 750mm (height-adjustable feet). This system was producing bulk multipack bags of 3 x different flavours of bags of crisps. Fjdpfx Afeyvac Aeuepn Speed - up to 18 packs/minute. Footprint of system - 7.3m long x 2.7m wide x 3.5m high (infeed conveyor to lazy susan).

Condition: used, functionality: fully functional, Year of construction: 1995, operating hours: 10,567 h, We are selling a mobile excavator O&K MH PLUS, manufactured in 1995, with various accessories. The operating hour meter reads 10,567. The tires were replaced approximately 4 years ago and show very little wear. Various hydraulic hoses have been replaced. See photos. The excavator is used very rarely and is always stored in a covered hall. Deep digging bucket: approx. 30 cm Deep digging bucket: approx. 80 cm Ditching bucket: approx. 200 cm The excavator must be picked up on site. Fpedpez Hb Nnofx Afuen

Year of construction: 2023, condition: new, APPLICATIONS: - Paving manufacture - Curb manufacture - Concrete block manufacture for: - masonry - foundation - posts - floor slabs - chimneys - scafa gutters - roadway gutter covers ADVANTEGES: - Vibrators on tamper head. - Bunker and drawer for finishing layer of paving and kerbs. - High productivity - active area 1,10 x 0,6m - Automatic operation: Fsdoht Uwpopfx Afujpn PLC (Mitsubishi Electric) logic programmer + touch display + software for automatic machine operation; Schneider Electric electrical command and control components - Our wide range of moulds can ensure a diversified production. - Reliable mechanical and hydraulic systems. COMPONENTS: - Press unit - Pallet space - Pallet feeding line - Hopper and drawer (1) for feeding the mould with concrete - Hopper and drawer (2) for making the finishing layer (paving, kerbs) - Pallet discharge line with freshly moulded products - Hydraulic unit - Electrical control panel with PLC. TECHNICAL FEATURES: - Pallet dimensions: 1240x750x45mm - Useful surface: 1100x630mm - Minimum/maximum finished product height: 40mm/ 250mm - Vibration frequency: 3000rpm - Cycle time: 35 - 60 seconds - Total Installed power: 30,00 kW MAIN DIMENSIONS : - Width: 2,10m (without hydraulic unit and control panel) - Length: 8,00m - Height: 3,10m - The hydraulic unit and control panel are placed at the side, at a distance of 1.00m from the chassis and occupy a surface area of 2m2. - Machine mass 6,000 kg

Year of construction: 2022, condition: like new (used), functionality: fully functional, machine/vehicle number: TAG ARTENA-03722-1/11, The TAG Artena 16-channel Weighing and Filling Machine is a fully automated, multi-product weigher designed for accurately portioning delicate small- and medium-sized loose fruit and vegetable products into trays. Fpsdpoykam Defx Afuon This machine is integrated at the upstream end of the production line, positioned before the packing and labelling machines. Products are loaded in bulk onto the weighing machine's conveyor belt, then directed onto the feed conveyors via a dynamic hopper and placed into trays. Trays are destacked and sorted onto the indexed conveyor. The filling process occurs in four steps, during which the trays are weighed in-line using patented technology. The machine is controlled via a touch-screen control panel, providing a comprehensive overview of its functions. Key product and machine performance specifications: • Weighing and filling system for delicate fruits • Feeding belts made from special soft material to prevent bruising of stone fruit • 8+8 multi-product weighing units • Enhanced product shelf-life due to reduced drop heights • Linear combination and/or counting operation logic • Three-way automatic dual tray/basket destacker • Multi-format, double-lane automatic tray/basket conveyor • Tray weight: from 300 grams up to 1,500 grams • Tray size: from 65x65xh25 mm to 200x200xh110 mm • Tray shapes: square, rectangular or round • Multi-material trays: plastic, plastic-free, cardboard, and other materials • Easy touch-screen control • User-friendly interface, ready for in-line connections • Automatic format changeover • Production statistics • Electrical connections for downstream machine synchronization • Button-operated clam-shell closing device • Two-to-one channel converger conveyor Main construction features: • Stainless steel frame • Sorting belt with support surface for crate tipping • 2 product feed elevator belts • 8+8 multi-product weighing units (patented system) • Clam-shell closing device • Automatic multi-format tray destacker • Food-grade PU motorized conveyor belts • Tray diverters • Synchronized step-by-step belt movement using sensors and microcontrollers • Belt function logic managed by TAG dedicated microcontroller and software • Electrical connections for synchronization with downstream machines (flowpack or other) • Power supply: 220V 50Hz, 2.5kW consumption • Compressed air circuit, minimum pressure 7 bar • Hardwired internet connection for remote support All line command and control functions are managed via a tablet supplied with the machine, serving as the HMI and onboard operator panel. The intuitive 3D graphic interface and 10'' touch-screen make the operation highly user-friendly.

Condition: used, Grant Aqua 5 Water BathThe Grant Sub Aqua 5 Plus is a digital, unstirred water bath designed for precise temperature control in laboratory applications. It is part of the SUB Aqua Pro series, known for its high-quality construction and reliability.​ Key Specifications Temperature Range: +5°C to 99°C Temperature Stability: ±0.2°C Capacity: 5 liters Internal Dimensions: 281 x 131 x 132 mm External Dimensions: 335 x 215 x 200 mm Heating Power: 0.35 kW Material: High-grade stainless steel tank Display: Digital with PID control for quick heat-up and precision Additional Features: Three programmable temperature presets Countdown timer with audible buzzer Front panel lock-out User-settable sample protection and fixed thermal cut-out Gable polycarbonate lid included​ Fpjdpfx Afexv Ayveujn This model is suitable for applications requiring stable and precise temperature control, such as sample incubation, enzyme reactions, and media preparation.

Condition: new, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 2113/21, type of input current: three-phase, input voltage: 400 V, total height: 2,200 mm, total width: 1,500 mm, total length: 2,000 mm, nominal power (apparent): 100 kVA, electrical fuse: 250 A, working range: 40 mm, welding power (max.): 100 kVA, overall weight: 2,500 kg, A new, unused butt-welding machine. Originally acquired for butt-welding 40 mm rebar, it was never put into service because the project was cancelled. The machine is currently fitted with 40 mm round jaws, but custom jaws of any required shape can easily be manufactured for it. In addition to rebar, the machine can be used to fabricate joints for heavy machinery or anchor bolts for reinforcement work. Fodoz Ehvlopfx Afuepn Suitable for the butt welding of all types of steel grades up to 1,500 mm².

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 0496, pressure: 11.76 bar, power: 1,395 kW (1,896.67 HP), operating pressure: 12 bar, temperature: 190 °C, operating temperature: 190 °C, total height: 1,600 mm, total length: 3,000 mm, nominal heat output: 1,395 kW (1,896.67 HP), total width: 1,360 mm, nominal power: 1,395 kW (1,896.67 HP), empty load weight: 3,200 kg, GAVARDO OMG 1200 Complete Industrial Steam Boiler Plant – 1395 kW – 2000 kg/h (2016) High-Capacity Industrial Steam Generation System for Continuous Factory Operation. Complete central steam plant removed from a professional textile factory. Suitable for immediate reinstallation in industrial production. The GAVARDO OMG 1200 is a high-efficiency industrial steam boiler plant manufactured by GAVARDO Caldaie S.r.l., Italy. Fsdpjzkggcefx Afujpn Designed for demanding industrial applications, this heavy-duty steam generation system delivers up to 2,000 kg of saturated steam per hour and is suitable for continuous 24/7 production environments. The system was previously installed in a professional textile manufacturing facility, where it served as the central steam supply for production. It remained fully operational until the factory shutdown. The boiler plant is offered as a complete industrial package, including the Riello burner, electrical control cabinet, pumps, pressure equipment, water handling components, and associated accessories. Technical Specifications • Manufacturer: GAVARDO Caldaie S.r.l. • Model: OMG 1200 • Boiler Type: Horizontal Industrial Steam Generator • Year: 2016 • Serial Number: 0496 • Thermal Capacity: 1,395 kW • Steam Production: 2,000 kg/hour • Maximum Working Pressure: 11.76 bar • Maximum Operating Temperature: 190.7 °C • Dry Weight: 3,200 kg • CE Marked • Manufactured in accordance with European Pressure Equipment regulations Key Features • Complete industrial steam boiler plant • High-capacity continuous steam production • Designed for 24/7 industrial operation • Riello industrial gas burner • Digital boiler control system • Industrial electrical control cabinet • Pressure monitoring and safety systems • Industrial feed-water and circulation equipment • Heavy-duty insulated boiler construction • Suitable for integration into existing steam distribution networks Includes • GAVARDO OMG 1200 steam boiler • Riello industrial gas burner • Main electrical control cabinet • Feed-water pumps • Water treatment equipment • Pressure vessels • Steam piping connections • Expansion and condensate tank system • Safety valves and pressure controls • Flue gas connection Applications • Textile manufacturing • Garment production • Industrial laundry facilities • Food processing • Steam process industries • Industrial heating systems • Continuous manufacturing plants Condition • Used industrial condition • Fully operational prior to factory shutdown • Installed in a professional indoor production environment • Good structural and mechanical condition • Normal cosmetic wear consistent with industrial use • Available for inspection before dismantling Location Valga, Estonia Dismantling & Transport Buyer is responsible for dismantling, rigging, loading, transportation, and all related costs. Professional dismantling is strongly recommended due to the size, weight, gas connection, pressure equipment, and associated piping systems. The site offers good access for heavy transport and lifting equipment. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI JEANS factory liquidation.

Condition: used, Year of construction: 2017, controller model: NEXUS, _____ Description: Year of manuf. : 2017 Material thickness : 14 mm Technical data Working length:3,100 mm Bending capacity / Folding capacity:14 / 12 mm Upper roll diameter:290 mm Lower roll diameter:270 mm Fpedozuikxspfx Afuen Side roll diameter:210 mm Main motor power:7.5 kW Machine length:4,475 mm Machine width:1,460 mm Machine height:1,520 mm Machine weight:8,000 kg Control system:NEXUS TouchScreen DNC equipment :- NEXUS DNC control system with touchscreen interface :Programming and operation options: :1. Manual mode – all movements controlled via joystick :2. Teach-in mode – saving of positions :3. Input of values for the rollers via the screen :Storage capacity for 300 programmes : :- Rollers made from C45 alloy steel, induction-hardened :to 50–55 HRC : :- Conical bending unit with both :side rollers set at an angle, lower roller set at an angle and :bearing with hardened guide roller : :- Calibration unit for re-rounding :welded tubes : :- Brake for the upper roller for greater precision when :positioning the material.

Year of construction: 2010, condition: ready for operation (used), A fully automatic industrial ABL apple peeling, coring and slicing machine is available. Throughput capacity: approx. 250-500kg/h, max. apple capacity: approx. 50/min, recommended fruit diameter range: approx. 60-100mm, peeling system: double peeling head (retrofit for peeling operation possible), ring slice thickness range: 3-15mm, number of segments: 18, min. ring thickness: 10mm, weight: 1.4t. With ABL SPFL 50 washing basin, weight: 600kg and crate tipper. The machine is currently unable to peel but can be retrofitted. Documentation available. An on-site inspection is possible. Fpedpfx Aeznmxasfusn

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 3542, conveyor belt length: 2,200 mm, conveyor belt width: 2,200 mm, conveyor belt speed: 116 mm/s, total length: 4,000 mm, total width: 4,000 mm, total height: 4,500 mm, overall weight: 4,000 kg, discharge height: 3,500 mm, power: 7.2 kW (9.79 HP), type of input current: three-phase, input voltage: 380 V, input frequency: 50 Hz, pivoting range: 90 °, Equipment: documentation/manual, We offer the following used D.B. S.R.L. PCLO 2200 contour foam cutting machine, manufactured in 2007. Fjdpfxsx T Ax Ns Afuepn Manufacturer: D.B. S.R.L. Model: PCLO 2200 Year of manufacture: 2007 Condition: used Category ID: 34 Type ID: 3028 Type: Contour Foam Cutting Machine If you have any questions or need more information, please send us a message or call us.

Condition: used, Year of construction: 2005, functionality: fully functional, AXOMATIC OPTIMA 700 Semi-Automatic Tube Filling & Sealing Machine Compact and high-quality tube filling and sealing machine from AXOMATIC, Italy. The machine was previously used for filling and sealing plastic tubes and is equipped with a hot-air sealing system, volumetric piston dosing system, heated product hopper, and agitator. Manufacturer: AXOMATIC S.r.l., Italy Model: OPTIMA 700 Serial No.: 14027E 2005 Year: 2005 CE marked MAIN EQUIPMENT - Semi-automatic tube filling and sealing machine - Rotary indexing table with 7 tube stations / holders - Manual tube loading - Volumetric piston dosing system - Stainless steel filling nozzle - Hot-air system for tube sealing - Temperature control for hot air - Heated stainless steel product hopper - Separate temperature control for hopper heating - Product agitator - Automatic / continuous dosing modes - Automatic tube discharge - Stainless steel machine construction - Transparent safety guarding - Emergency stop and safety controls - Various format and spare parts available - Documentation available Fpodszyu R Uepfx Afujn ELECTRICAL / UTILITY DATA Voltage: 400 V Frequency: 50 Hz Installed power: 8.5 kW Max. compressed air pressure: 6 bar Approximate air consumption: approx. 150 l/min Max. water pressure: 3 bar Approximate water consumption: approx. 2–3 l/min Noise level: < 75 dB Net weight: approx. 300 kg APPLICATION Suitable for filling and sealing plastic tubes. The machine is particularly well-suited for creams, gels, ointments, pastes, and other liquid to viscous products, depending on the product and the installed dosing configuration. CONDITION Used machine in good and complete visual condition. The machine is currently in storage and has not yet been function-tested by us. We are planning to prepare and set up the machine for a functional test and demonstration. Once completed, a functional test and machine video can be provided. The machine can be inspected by appointment. Several machine-specific format and spare parts are included / available. The exact scope will be documented before delivery. IMPORTANT Exact tube dimensions, dosing range, and production capacity depend on the installed format and dosing components and are currently being verified. Further technical information, detailed photographs, and documentation are available upon request. Price: EUR 22,500 net negotiable, EXW Switzerland

Condition: like new (used), Year of construction: 2016, functionality: fully functional, ecnoforni FEC industrial electric kiln in very good condition. Three-phase power supply, 28 kW, maximum temperature 1100°C. Suitable for ceramics, refractory materials, and industrial thermal applications. Reliable machine for workshop or production use. Fodpsy I N Rujfx Afujpn