Used Sceat Beta Mtn for sale (120)

Condition: used, Year of construction: 2010, functionality: fully functional, Max. working temperature 90° C. Max. working pressure: 2 kg/cm². Power 3.000.000 kcal Fuel: wood waste The MTN boiler is a hot water generator that uses sawdust as fuel, with "AUTOFOCO" type burner loading. The boiler is of horizontal type Tubular plates and shell are made of thick carbon steel sheet. The core is covered with refractory cement with a high percentage of alumina. At the rear there is a cast iron grate for burning solid pieces of wood, calculated for an output equal to 60% of the rated output of the boiler. The tube bundles are made of carbon steel. The base incorporating the hearth is of large dimensions, to allow the burner to be mounted with a plug. The boiler is supplied with an air distribution manifold. The boiler body is insulated with mineral wool and covered with cast iron Accessories: - 1 Adjustable thermostat - 1 safety thermostat - 1 safety thermostat with manual start - 1 thermometer - 1 hydrometer - 1 combustion control device - 1 thermostatically actuated valve positioned in the flue tube MANUAL FEED GRILL is a fixed grill made of special nodular cast iron bars, fixed in refractory material, easily interchangeable. 1 Complete electrical components, motor protections, contactors. 1 Complete set of wiring accessories 1 General circuit breaker 1 Power supply for auxiliary circuits 1 Circuit diagram 1 Pressure gauge 2 Temperature probes Iisdpfotywzqsx Amgjh 1 Dust suction system consisting of a fan with belt transmission, with decanter cyclone, boiler-cyclone connections, cyclone-fan, fan-fan, fan-smoke stack, in painted carbon steel. 1 Chimney

Condition: like new (used), Year of construction: 2016, Solid fuel boiler. Iiedey S E Nzopfx Amgoh

Condition: excellent (used), Year of construction: 2016, Solid fuel boiler. Very good condition. Operates with wood chips, wood waste, and sawdust. Iiodey Uzhropfx Amgeh

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, nominal power (apparent): 3,000 kVA, Industrial hot water boiler 3,000,000 kcal/h. Rated power: 3,000 kcal, approximately 3.4 MW. Iiodpst Ngfisfx Amgsh

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Superheated water boiler at 152°C, 1 Gcal/h, automatic feed, year of manufacture 2014 – manufacturer Sceat Italia - Heat output: 1,000,000 kcal/h - Pressure: 4 bar - Superheated water temperature: 152°C - Equipped with control thermostat, safety thermostat, thermometer - Working pressure: 4 atm - Fuel: wood waste, sawdust - Flue gas evacuation system: cyclone, forced draft fan, connection ducting - Furnace: lined with high alumina refractory bricks – prepared for wet materials from processing. Special refractory bricks laid with high alumina content cement, suitable for high humidity – optimized for the combustion of sawdust from log cutting Flue gas extraction system - Belt-driven fan - Multicyclone separator - Connecting ducts: boiler-multicyclone, multicyclone-fan, fan-chimney - Chimney Included accessories - 2 safety valves Iiedjw Ewafjpfx Amgjh - Cast iron discharge valve - Operating thermostat - Safety thermostat - Thermometer - Safety pressure switch - Pressure switch guard - Manometer with 3-way valve - Alfa 10 diameter 50 discharge valve Flue gas removal system - Cyclone for collecting solid combustion particles before flue gases are released into the atmosphere - Smoke extractor/fan to improve combustion by increasing draft in the boiler, essential if a smoke treatment system is present or when significant flow losses occur - Painted carbon steel alloy connection ducts between boiler and multicyclone, and between multicyclone and fan - Electrical panel serving the feed electropump, static level, pressure switches, minimum level probe for the smoke extractor fan, and all devices serving the generator - Chimney made of carbon steel

Condition: excellent (used), Year of construction: 2011, operating hours: 7,541 h, functionality: fully functional, spindle motor power: 25,000 W, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, type of input current: three-phase, total height: 2,067 mm, total length: 5,671 mm, total width: 2,721 mm, overall weight: 8,000 kg, spindle diameter: 250 mm, Equipment: documentation/manual, Main spindle: 25 kW, 5000 rpm, SMW Autoblock chuck diameter: 250 mm, bar diameter: 65 mm. Counter spindle: ISM52, 20 kW, 6000 rpm, SMW Autoblock chuck diameter: 210 mm. Turning and milling spindle (B-axis): HSK63A, 18000 rpm, external/internal coolant with high-pressure flushing at 20 bar. Direct axis measurement. Tool magazine for 24 tools. Chip conveyor, extraction system with filtration. The delivery includes various HSK63A tool holders. Direct sales to end users only. W-Technology s.r.o. Polní 8 79201 Bruntál Czech Republic Iiedpjz Dpm Nsfx Amgeh

Condition: used, Kübrich   Kübrich Test Systems 48V Belt Starter Generator - Component Test Bench   Details of the test bench: (See Figure 13) Frame with (1) Mounting device for a belt starter generator (2) Load machine (3) Belt (4) MP1: Control cabinet (5) MP3: Control cabinet for control, interface panel with main switch, I/O (6) MP2: Control cabinet with Simotion (7) MP4: Control cabinet with DC-DC converter (8) H3: Measuring technology box (9) H4: Interface box   Intended use: The test bench is used for carrying out tests on belt starter generators during development.   Technical data: Electrical connection data Power supply: 400 V / 32 A Battery simulation: 0 - 60 V Current: 0 - 250 A (continuous) Current: 330 A (short-term, less than 1 s) Control voltage 24 V   Mechanical performance data according to the data sheet of the load machine A gear ratio of 1:2 to the test specimen shaft must be considered. Speeds: Load machine: Manual operation: 0 - 50 rpm Automatic operation: min Test specimen motor: Manual operation: 0 - 0 rpm Automatic operation: 0 - rpm   Dimensions and weight Width: 850 mm Height: 1386 mm Length: 1687 mm   Weight: approx. 1.2 t Isdezhkb Sepfx Amgsih   Condition: used   Scope of delivery: (See Figure)   (Changes and errors in the technical data are subject to change!)   We will be happy to answer any further questions you may have by telephone.

Condition: used, Year of construction: 2015, turning diameter max. 500 mm turning length 800 mm control sl Operate 3G ShopTurn Siemens swing diameter 500 mm distance between spindles 1.020 mm turning speed range - main spindle max. 5.000 min/-1 power capacity - main spindel 25 / 34 kW max. Torque 280 / 380 Nm spindle head 170h5 spindle diameter in front bearing 130 mm spindle bore 87 mm C-Axis 0,001 ° tool taper HSK 63 A number of toolpositions 80 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 120 mm max. tool weight 12 kg max. tool length 300 mm Speed Milling Spindle max. 12.000 min/-1 power capacity - milling spindle 19 / 22 kW Torque 85 / 100 Nm tool taper HSK 63 A B-Axis +/- 110 ° x-axis -10 ... +490 mm y-axis +/- 100 mm z-axis 1: 845 mm z-axis 2: 600 mm Iedpjz S Nygofx Amgoih z-axis 3: 800 mm Spindle speed range subspindle max. 6.000 min/-1 power capacity - Sub spindle 20 / 27 kW bar material dia. 51 mm spindle bore diameter 73 mm spindle diameter in front bearing 100 mm C-Axis 0,001 ° total power requirement 85 kVA weight of the machine ca. 10,0 t dimensions of the machine ca. 7,0 x 2,9 x 2,6 m CNC - Turning- and Millingcenter DMG MORI - CTX beta 800 TC V6 - 5-axis simultaneous machining - Main and counter-spindle - Swivel-type milling spindle - ShopTurn - Off-center turning and milling - Multi-thread cycle - Program state control - Tool sorting cycle - Easy Tool Monitor for Siemens control system - Chuck flushing system for main spindle - Chuck flushing system for counter-spindle - Differential pressure clamping - Coolant supply through the counter-spindle - Bar machining package for CTX beta (77 mm capacity) Workpiece the-take-off device (left side) Hydraulic hollow clamping system 4-color signal tower Interface for bar feeder or bar magazine - In-process workpiece measuring system (Renishaw) - Safety window cleaning system - Coolant spray gun

Condition: like new (used), Year of construction: 2015, operating hours: 14,717 h, functionality: fully functional, turning length: 800 mm, turning diameter: 500 mm, spindle speed (max.): 12,000 rpm, travel distance X-axis: 480 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 845 mm, rotational speed (max.): 5,000 rpm, type of input current: three-phase, workpiece weight (max.): 7 kg, total height: 2,247 mm, total length: 2,890 mm, total width: 5,193 mm, overall weight: 7,800 kg, CNC controller: Siemens 840D sl with CELOS ERGOline Capacity X-axis travel mm: 480 (–10) Y-axis travel mm: ±100 Z-axis travel mm: 845 B-axis travel mm: ±110° (0,001º) C-axis: 360º (0,001º) Turning length mm: 800 Max. turning diameter mm: ø: 500 Distance between spindle centers mm: 1.020 Turn-mill spindle Speed spindle rpm: 12.000 Drive power kW: 22 / 19 Tool magazine Magazine places: 48 Tool holder: HSK-A63 Tool length max. mm: 300 Tool diameter max. mm: 125 Tool weight max kg: 7 Main spindle Speed spindle rpm: 5.000 Drive power spindle kW: 25 / 34 (100 / 40%) Spindle bore mm: 67 Maximun torque Nm: 380 / 280 Counter spindle Speed spindle rpm: 6.000 Drive power spindle kW: 20 / 27 (100 % / 40%) Spindle bore mm: 52 Maximun torque Nm: 170 Counter spindle travel mm: 800 Coolant system Tank capacity liter: 600 L High-pressure bar: 8 / 20 Equipment Chip conveyor Blowing air through spindle center selectable via M-function Signal lamp Tool measuring arm Workarea light Coolant gun Internal coolant supply Iijdpfoxdlynox Amgsh Interface for Bar feeder Paper band filter Working time hours Under power: 36.049 Cutting Time: 14.171 Basic machine dimensions / weight Length mm: 2.890 Width mm: 5.193 Height mm: 2.247 Weight kg: 7.800

Condition: used, Year of construction: 2010, operating hours: 62,569 h, functionality: fully functional, machine/vehicle number: 00410001121, spindle speed (max.): 5,000 rpm, overall weight: 5,695 kg, Equipment: documentation/manual, We are offering this used DMG CTX beta 500 V6 CNC turning and milling center, year of manufacture 2010. Serial number: 00410001121 Year of manufacture: 2010 Max. main spindle speed: 5000 rpm Max. counter spindle speed: 6000 rpm Ijdpfezv Tbqjx Amgjih Weight: 5695 kg If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2009, operating hours: 87,000 h, functionality: fully functional, turning length: 600 mm, turning diameter over cross slide: 410 mm, spindle speed (min.): 22,000 rpm, For sale is a CNC turning center from the manufacturer DMG, type CTX beta 800, built in 2009. Available immediately. The machine is in good condition and fully functional. Technically sound and ready for immediate use. Technical data: Machine type: CNC turning center Manufacturer: DMG Type: CTX beta 800 Year of manufacture: 2009 Control: Heidenhain 4290 Max. turning length: 600 mm Tool turret: 12-position Tool holder: VDI 40 Operating hours: approx. 87,000 h Spindle hours: approx. 22,000 h Linear guide Z1 recently renewed Turret drive S2 recently replaced Machine regularly serviced by customer support technically sound and fully functional Inspection under power possible by arrangement Service and maintenance reports available large accessory package powered tools from WTO further documentation and images available upon request If interested, please write or call. Iijdpfx Asyq Hq Nemgoh Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, STACK CMF BETA 2000 PRINTER 6-color flexographic stack printer Materials that can be printed: paper and plastic film Printing options: 6+0; 3+3; 4+2; 5+1 Maximum printing width: 1600 mm Maximum material width: 1660 mm Printing repeat: 330 to 1200 mm Production speed: up to 200 m/min Single unwinder Automatic turret rewinder Gas drying system Corona treater Various cylinders and anilox rollers included Year: 1997 Isdpfx Amjz Rm Sqogoih

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Sharpening machine for carbide-tipped circular saws. Sharpens the front and rear edges in a single pass. Technically inspected. Technical specifications in the PDF. Iijdozl Snuepfx Amgoh

Condition: good (used), Year of construction: 2012, CNC Turning / Millingcenter Machine type: DMG CTX beta 500 V6 Control: Siemens 840 D Shopturn Year: 2012 Working hours: 42.067 h Spindle running time: 20.209 h SPECIFICATIONS Max. turning length: 500 mm Turningdiameter: 410 mm Max. swing over bed: 700 mm Spindle bore: 87 mm Bar capacity: 77 mm C-Axis: 0,01° Main Spindle: ISM 76 Max. revolution: 5.000 rpm Spindle power: 25 / 34 kW Torque: 280 Nm Collet chuck: Hainbuch Spantop Nova 65 Subspindle: ISM 52 Max. revolution: 5.000 rpm 3-jaw chuck: Berg KHL 200 mm Travel Y-Axis: mm Amount of turrets: 1 Tool: VDI 40 Driven Tools: 12 revolution driven tools: 4.000 drive power driven tools : 11,3 kW Equipment Chip conveyor Short Bar Loader: LNS QLS 80 S2 Direct linear scales: X,Y High pressure pumps Toggle filter Tool setter Iiedpfx Amjz D Ug Iegjh

Condition: good (used), Year of construction: 2009, CNC Turning / Millingcenter Machine type: DMG CTX Beta 800 V4 Control: Heidenhain 4290 Year: 2009 Available after: sofort / now SPECIFICATIONS Max. turning length: 800 mm Turningdiameter: 410 mm Max. swing over bed: 700 mm Bar capacity: 67 mm C-Axis Main Spindle Max. revolution: 5.000 rpm Spindle power: 34 / 25 kW Tailstock Travel X-Axis: 300 mm Y-Axis: 60 +/- mm Z-Axis: 800 mm Amount of turrets: 1 Tool capacity: 12 Tool: VDI 40 Driven Tools: 12 Equipment Ijdjz D Ugzepfx Amgeih Chip conveyor High pressure pumps Collets: Schunk Chip rinsing pistol

Condition: excellent (used), Year of construction: 2012, CNC turning and milling center Gildemeister CTX Beta 1250 4A with Sinumerik 840D Shopturn Year of manufacture: 2012 Program running hours: approx. 20,000 hours GEARING OPTION ACTIVATED Technical data: Main spindle speed: Drive power: 32 kW ISM 102 Counter spindle speed: Drive power: ISM 76 Iedpeyfcrrjfx Amgoih Y-axis slide 1 Driven tools 1x12 on slides 1+2 Bar loader package Workpiece gripper can be used on both main and counter spindles Coolant system Chip conveyor

Condition: good (used), Casadei Beta wide belt sanding machine - Sanding width: 110 cm - One 11 kW motor drives 2 sanding units - First unit: calibrating unit with rubber-coated roller; second unit: sanding shoe, adjustable from the control panel Iodpsz Smm Sefx Amgoih - Digital display of the sanding height - 2 feed speeds

Condition: used, BOGE Screw compressor / industrial compressor BOGE C 9 Screw compressor – 7.5 kW – 10 bar – 1,060 m³/min For sale is a used screw compressor from the manufacturer BOGE, including the ELMED HELIO-STROB BETA A2 stroboscope measuring system. The compressor is suitable for supplying compressed air to machines, workshops, production facilities, and for general industrial compressed air applications. Technical data: Manufacturer: BOGE Type: C 9 Device type: Screw compressor Year of manufacture: 2017 Volume flow rate: 1,060 m³/min Compression end pressure: 10 bar Motor power: 7.5 kW Motor speed: 3000 min⁻¹ Control: BOGE base control Digital operating and display panel ELMED HELIO-STROB BETA A2: Manufacturer: ELMED Messtechnik Series: HELIO-STROB Type: BETA A2 Mains connection: 115 / 230 V AC Mains frequency: 50–60 Hz Max. power consumption: 80 VA Equipment: BOGE base control control unit Digital operating and display panel Emergency stop switch Sound-insulated housing CE marking ELMED HELIO-STROB BETA A2 control unit ELMED stroboscope hand lamp Connection cable Operating manual HELIO-STROB Accessories as shown in the pictures Application areas: Industrial compressed air supply Production facilities Workshops Machine supply Manufacturing companies General compressed air applications Scope of supply: 1 × BOGE C 9 screw compressor 1 × ELMED HELIO-STROB BETA A2 control unit 1 × ELMED stroboscope hand lamp 1 × Connection cable 1 × Operating manual HELIO-STROB Accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures BOGE operating display shown in the switched-on state ELMED HELIO-STROB shown in the switched-on state Type plates are present Dimensions: Iiedpszxpi Nsfx Amgoh BOGE C 9 (W × D × H): approx. 483 × 907 × 955 mm ELMED HELIO-STROB BETA A2 control unit: approx. 280 × 240 × 80 mm ELMED hand lamp: approx. 182.5 × 117 × 117 mm Transport data: Weight BOGE C 9: approx. 215 kg Weight ELMED control unit: approx. 2.3 kg Weight ELMED hand lamp: approx. 1.5 kg Total weight of devices: approx. 219 kg plus cable and operating manual The table shown in the photos, as well as any other items not explicitly mentioned, are not included in the sale. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: used, Year of construction: 2015, 3 axis cnc lathe DMG MORI CTX BETA 2000 Year of production 2015 Iiedpsulw Igofx Amgoh Siemens 840D control C axis driven tools Tool head 16 positions Sauter VDI40 Max. workpiece diameter 600mm Max. workpiece length 2,000 mm Spindle clearance: Ø104mm Hydraulic support Measuring probe

Condition: ready for operation (used), Year of construction: 2013, operating hours: 35,000 h, travel distance X-axis: 300 mm, travel distance Z-axis: 800 mm, spindle motor power: 48,000 W, spindle speed (max.): 4,000 rpm, controller manufacturer: SIEMENS, controller model: 840 D, number of axes: 4, This 4-axis DMG MORI CTX Beta 800 4a was manufactured in 2013. It features a powerful Mailspindle ISM 102 with a speed of 4,000 rpm and an efficient 8/20 bar coolant system with a 600 L capacity. The machine is equipped with a 16-place star turret and a barfeeder for enhanced productivity. If you are looking to get high-quality turning capabilities, consider the DMG MORI CTX Beta 800 4a turn-mill centre we have for sale. Contact us for further details. • Coolant system: 8/20 bar, 600 L, with paper band filter • External coolant for main and sub spindles • Draw tube: 104 mm • Turrets: 2 x 330 mm VDI30, 16-station star turrets Additional equipment • Bar feeder IF • IRCO bar feeder SIMAG 80.1-R, 3200 mm Technical Specification Driven Tools Yes Counter Spindle Yes Iiedpfx Amsyuc Apegsh

Condition: ready for operation (used), Year of construction: 2014, operating hours: 48,973 h, controller manufacturer: SIEMENS, controller model: 840 D, number of axes: 3, This DMG MORI CTX Beta 800 4a was manufactured in 2014. It features a Siemens 840 D control system, a counter spindle, and a bar machine package for enhanced versatility. The machine includes a 980-liter coolant system and a hinge type conveyor for efficient operation. If you are looking to get high-quality turning and milling capabilities, consider the DMG MORI CTX Beta 800 4a machine we have for sale. Located in Germany, contact us for more information about this machine. • 2 x 16 fold Sauter star VID 30 • Siemens 840 D • Excentric turning and milling operation • TC alternating speed • Counter spindle • Glass scales Y1, Z1, Z2, Z3, X1, X2, X3 Additional equipment Iiodpex D Nd Dsfx Amgsh • 980 liter coolant with 8 bar/20 L and 20 bar/40 L programmed by M function • Pater band filter • Chuck rinsing device for main outside • Chuck rinsing device for counter outside • Coolant spray gun • Hinge type conveyor • Bar machine package • Window cleaning with compressed air • SK package for alu machining • Tool breakage Artis CTM

Condition: ready for operation (used), Year of construction: 2015, operating hours: 48,086 h, controller manufacturer: SIEMENS, controller model: 840D, number of axes: 3, This 3-axis DMG MORI CTX Beta 800 4a was manufactured in 2015. It features a Siemens 840 D control, a main spindle and counter spindle, and a bar machine package for efficient operations. Ideal for complex turning and milling tasks, it includes a hinge type conveyor and a coolant system with multiple pressure settings. If you are looking to get high-quality turning capabilities, consider the DMG MORI CTX Beta 800 4a machine we have for sale. Located in Germany, contact us for more information. • IMS 76 main spindle • Counter spindle • 2 x 16-station Sauter star turret VID 30 • Siemens 840D control • Eccentric turning and milling capability • TC alternating speed • Glass scales on X1, X2, X3, Y1, Z1, Z2, Z3 • Counter spindle slide with cross stroke, C3, tailstock Iijdpfxox D Ndwo Amgsh Additional equipment • 980 L coolant system with 8 bar/20 L and 20 bar/40 L high-pressure, M-function programmable • Paper band filter • Chuck rinsing device for main (outside) • Chuck rinsing device for counter (outside) • Coolant spray gun • Hinge-type chip conveyor • Bar machine package (bar feeder) • Window cleaning with compressed air • SK package for aluminum machining • Tool breakage monitoring Artis CTM

Condition: new, Year of construction: 2024, Safety glass window for a Gildemeister CTX Beta 500 V4, item in original packaging, unused and new. Iedpfxsyx U Sls Amgeih

Condition: ready for operation (used), Year of construction: 2013, operating hours: 22,100 h, bar diameter (max.): 104 mm, overall weight: 13,000 kg, controller manufacturer: SIEMENS, controller model: Sinumerik, number of axes: 4, This 4-axis DMG CTX beta 800 4A was manufactured in 2013. It features a maximum turning diameter of 340 mm and a turning length of 735 mm. The machine is equipped with two 12-station tool turrets and an integrated spindle motor with a maximum speed of 4000 rpm. If you are looking to get high-quality turning capabilities, consider the DMG CTX beta 800 4A multi-spindle turning machine we have for sale. Contact us for further details. - Control: Siemens 840D Solutionline with ERGOline Control and ShopTurn 3G- Max Turning Diameter: 340 mm- Max Turning Length: 735 mm- Main Spindle (HS): Integrated spindle motor ISM 102, 40/48 kW (100/40% ED), 0-4000 rpm, 570/680 Nm- Counter Spindle (GS): Integrated spindle motor ISM 76, 25/32 kW (100/40% ED), 0-5000 rpm- Draw Tube Inner Diameter: 104 mm- Tool Turrets: 2x 12-station Sauter star turrets (VDI 40 with Trifix interface, DIN 69880-40)- Driven Tool Drive: 2x Direct Drive, 40-10,000 rpm, 14.2 kW, 34 Nm- Axis Configuration: 4 Main Motion Axes (X1, Z1, X2, Z2), 2 C-Axes with hydraulic spindle brake (HS + GS), Y-Axis for Slide 1 and Slide 2 (stroke 40 mm), NC cross-stroke X3 axis for counter-spindle slide (180 mm)- Counter Spindle Slide: Includes NC cross-stroke X3 (180 mm) with linear scale, and integrated tailstock- Tailstock: Automatic quill stroke 300 mm, tailstock force 1.5 - 6.3 kN, revolving center MT5- Measuring Systems: Direct measuring systems (Glass scales) in X1, X2, and X3 axes- Coolant System: 980 Liter tank with band filter, cooler, 8/20/80 bar pressure options, and expansion for Turret 2- Additional Equipment: Chip conveyor, automatic electric sliding hood, workpiece in-process measurement system (Renishaw), Brankamp CMS collision monitoring system, mechanical oil mist separator (1,100 m³/h) Technical Specification Iijdpfxjzzpxpj Amgoh Counter Spindle Yes

Condition: used, Heraeus Atlas Type: Heraeus Atlas Xenotest BETA LM Iedpozdtkuofx Amgsih Weathering test device Heraeus Atlas Xenotest BETA is a universal weathering instrument for testing the lightfastness and weather resistance of materials under normal, high-temperature, and high-performance conditions. XENOSENSIV gearbox Control of lamp power in W/m² XENOCHROME 320 35-100 W/m² Specimen chamber temperature up to 80°C, controlled Measurement sensors at specimen level XENOSENSIV E(300-400 nm) Humidification / irrigation Water supply with integrated water tank Specimen chamber temperature: Ambient - 80 °C Black standard temperature: Surface - 130 °C Relative humidity: 10 % - 95 % Electrical version: 3/N/PE AC 400V ± 10 % 50-60 Hz Mains connection: 32A Power consumption: approx. 12 kVA Rated power of the xenon lamp 2200 VA Power of the xenon lamp 2800 VA Rated current 16A Lamp current max. 20A Dimensions: Width 900 mm x Depth 1200 mm x Height 1800 mm Maximum specimen area 4000 cm² Weight: approx. 400 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.