Used Schaal Sep 40 for sale (22,530)

Condition: used, Year of construction: 1987, pressure 40 t no. of strokes 500 Hub/min Dodpfovu E Iwsx Adrscn total power requirement 5,5 kW

Condition: used, Year of construction: 1985, machine/vehicle number: 751, dimensions of the machine ca.:2,6 x 1,0 x 2,2 m pressure:40 t Dedecxxnmjpfx Adrscn sheet width:150 mm stroke:8 - 70 mm number of strokes - stepless:60 - 300 min-1 ram surface:340 x 320 mm ram adjustment:70 mm table-size:550 x 580 mm Working width max.:210 mm column travel -side:250 mm hole in the table:400 x 90 mm clamping plate thickness:60 mm boring of tool-holders:Ø 40 x 80 mm groove width:30 mm flute depth:6 mm distance between columns:560 mm weight of the machine ca.:3,8 t total power requirement:7,5 kW

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, This SCHAAL SEP 80 (Machine No. 00-1564, built 2000 at A. Schaal GmbH & Co., Salach/Württemberg, Germany) is a precision eccentric press engineered for demanding high-volume stamping work. Built around a vibration-damped O-form double-column cast frame, it delivers the rigidity and dimensional stability required for fine-blanking, progressive die stamping, and high-tolerance production runs where part quality cannot drift across the shift. This press comes equipped with the matched SCHAAL SWV 3E roll feeder, so it's ready to run as a complete coil-fed stamping line out of the gate: Feed length: 0–9,999.9 mm (fully programmable) Strip width: up to 320 mm Strip thickness: 0–4 mm. Further used machines by Mabu, Bruderer, Bihler and Schaal are available for sale from our stock. Manufacturer A. Schaal GmbH & Co. Werkzeug- u. Maschinenbau Type SEP 80 Year of manufacture 2000 Machine number 00-1564 CE marking Yes Press force 800 kN Adjustable stroke 8–80 mm Distance table-to-ram (max, ram down, with bolster) 310 / 355 mm Ram adjustment 80 mm Ram dimensions 500 × 400 mm Ram bore Ø 50 × 90 mm Ram keyway 30 H7 mm Table size 830 × 700 mm Bolster plate thickness 80 mm Through-hole in table 500 × 200 mm Strip pass line over table (with bolster) 120 mm ± 40 mm Total installed power 26 kW Supply voltage 3 × 400 V, 50 Hz Rated current 40 A Pre-fuse 50 A Weight 8,000 kg Feeder SCHAAL SWV 3E roll feeder Feed length: 0–9,999.9 mm (fully programmable) Dsdpfx Aozab Ibedrecn Strip width: up to 320 mm Strip thickness: 0–4 mm

Condition: used, Year of construction: 2001, functionality: fully functional, The Schaal SEP 80 is a 80-ton eccentric press designed for precision stamping and forming. Its Unidor electronic control system ensures repeatable stroke accuracy and fast setup, while the integrated tool safety device protects dies from damage caused by misfeeds or incorrect part positioning — reducing downtime and tooling costs. The machine features a rigid double-column O-frame in vibration-damping cast iron, 6-point play-free roller ram guidance, and a flywheel drive with pneumatic clutch/brake combination. It comes equipped with a gripper feeding device SZV 302 feed unit for automated strip feeding. Pressing force: 800 kN (80 tons) Strokes per minute: 60 – 320 min⁻¹ Ram stroke (adjustable): 8 – 80 mm Ram adjustment: 80 mm Ram surface: 700 × 500 mm Table size (clamping plate): 830 × 700 mm Clamping plate thickness: 80 mm Table opening: 500 × 200 mm Strip feed clearance: 120 ± 40 mm Dodpfszhw Hujx Adrjcn Feed unit: Schaal SZV 3 Strip width: 10 - 270 mm Thickness: 0 – 4 mm Drive power: 21.5 kW Weight: 8,000 kg Footprint: 1,500 × 2,000 mm, height: 2,885 mm

Condition: used, Year of construction: 1987, machine/vehicle number: 87 / 906, pressure:63 t stroke:8 - 80 mm no. of strokes:60 - 300 Hub/min distance between columns:720 mm table surface area:710 x 700 mm hole in the table:345 x 100 mm column travel -side:320 x 200 mm ram surface:500 x 400 mm ram adjustment:80 mm throat:350 mm dayligth:250 / 275 mm feed length:220 mm table above floor:1000 mm total power requirement:9,2 kW weight of the machine ca.:6,5 t Dodpfx Adscxxpcjrjcn

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, The Lima RM400D separator is designed for processing facilities aiming to optimize meat recovery from bones or carcasses. It effectively separates meat from bone residues through a controlled mechanical process. As a result, product losses are minimized and material yield is improved, directly contributing to process profitability. Furthermore, this machine ensures consistent separation quality—an essential factor for industrial-scale production. Thanks to its operating principle, the RM 400 D is suitable for various types of raw materials, achieving high yields depending on the product processed. It is well-suited for pork bone processing as well as whole poultry carcass treatment. Additionally, the screw and drum design ensures constant pressure, which guarantees homogeneous and controlled separation. This separator can be easily integrated into an existing production line, as its size is compatible with many workshop configurations. Its robust construction allows for continuous operation in demanding industrial environments. Moreover, access to key components facilitates cleaning and maintenance, reducing downtime. As a result, production continuity is improved and overall system reliability is enhanced. Dcedpfoyfd Iuex Adrsn Available reconditioned or used from Europ'Equipement, the Lima RM 400 D undergoes stringent technical inspections. Users benefit from a fully functional machine, ready for immediate use with no major modifications. Purchasing pre-owned equipment is also a cost-effective solution, allowing for controlled investment while maintaining performance standards suitable for industrial requirements. Therefore, this separator is a logical choice to improve material yield and secure the processing workflow. Technical specifications: Year of manufacture: 2007 Operating hours: 1,342 h Power supply: 400 V – three-phase – 50 Hz Current: 21.1 A Motor power: 11 kW Screw speed: 1,500 rpm Drum diameter: 140 mm Perforation diameter: 5 mm Separation yield: 40 to 45% on pork bones 80 to 85% on poultry carcasses Dimensions (L × W × H): 1,920 × 750 × 1,730 mm

Condition: like new (used), Year of construction: 2023, operating hours: 100 h, functionality: fully functional, ABB Robotics IRB 4600-40/2.55 robot IRC5 controller Year of manufacture: 04/2023 Approx. 100 operating hours Used item – shows normal signs of wear. Further details, article numbers, and images available upon request. Two-week commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Ex works / free loading. Dodpjz I I Nqjfx Adrocn The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the value-added tax shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the quantity, weight, and desired delivery conditions. Shipping costs to foreign countries available upon request – please specify the country, city, and postal code. Freight costs available upon request – please specify the delivery address.

Condition: good (used), Year of construction: 2016, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 40 t, stroke length: 170 mm, operating speed: 10 mm/s, reverse speed: 170 mm/s, table width: 90 mm, table length: 1,270 mm, table height: 850 mm, throat depth: 350 mm, clearance between the columns: 1,050 mm, oil tank capacity: 80 l, total length: 2,150 mm, total width: 1,650 mm, total height: 2,300 mm, overall weight: 3,250 kg, year of last overhaul: 2025, Equipment: CE marking, safety light barrier, 2016 Ermaksan Speed-Bend Pro 1270 x 40 CNC Press Brake – 6 Axis – Delem DA-66T Control Used 2016 Ermaksan Speed-Bend Pro 1270 x 40 CNC hydraulic press brake for sale in Ireland. 6-axis CNC press brake with Delem DA-66T graphic control, Y1, Y2, X, R, Z1 and Z2 axes, tooling, laser guards. Manufacturer: Ermaksan Model: Speed-Bend(SB) Pro 1270 x 40 Axes: 6 Year: 2016 Capacity: 1270mm x 40T Control: Delem DA66T Description 2016 Ermaksan Speed-Bend Pro 1270 x 40 CNC Press Brake, a compact, high-quality 6-axis CNC hydraulic press brake ideal for precision sheet metal bending, fabrication workshops, engineering companies and production environments. This Ermaksan Speed-Bend Pro 1270 x 40 offers a bending length of 1270 mm and a bending power of 40 tonnes. It is fitted with a Delem DA-66T graphic CNC control, providing a clear touch-screen interface for accurate programming, bend sequence calculation, tooling setup and repeatable production bending. The machine is in good condition. It comes complete with Euro-style top and bottom press brake tooling, laser guards, foot pedal, quick-release top tool clamps and rear safety doors, making it a well-equipped used press brake ready for immediate inspection and production use. This is a superb opportunity to purchase a late-model, compact Ermaksan CNC press brake with a desirable 6-axis specification, ideal for companies looking for a reliable used hydraulic press brake in Ireland, the UK or Europe. Key Features Manufacturer: Ermaksan Model: Speed-Bend Pro 1270 x 40 / SB PRO 1270-40 Year: 2016 Type: CNC hydraulic press brake Bending length: 1270 mm Bending power: 40 tonnes Axis configuration: 6 Axis CNC controlled axes: Y1, Y2, X, R, Z1 and Z2 Control: Delem DA-66T Graphic CNC Control Condition: Good condition Tooling: Complete with Euro-style top and bottom tools Safety: Laser guards and rear safety doors Clamping: Quick-release top tool clamps Includes: Foot pedal Suitable for: Sheet metal fabrication, precision bending, general engineering, subcontract fabrication and production bending Technical Specifications – SB PRO 1270-40Model: SB PRO 1270-40 Bending length: 1270 mm Bending power: 40 tonnes Distance between columns: 1050 mm Y-axis rapid speed: 140 mm/s Y-axis working speed: 10 mm/s Y-axis return speed: 170 mm/s X-axis travel: 500 mm X-axis speed: 500 mm/s R-axis travel: 250 mm R-axis speed: 350 mm/s Z1 / Z2-axis travel speed: 1000 mm/s Backgauge finger blocks: 2 Oil capacity: 80 litres Motor power: 5.5 kW Stroke: 170 mm Daylight: 387 mm Throat depth: 350 mm Table height: 850 mm Table width: 90 mm Machine Dimensions: 2150 x 1650 x 2300mm Machine weight: 3250 kg Standard / Included Equipment This used Ermaksan Speed-Bend Pro press brake is supplied with: 6 CNC axes: Y1, Y2, X, R, Z1 and Z2 Djdpfx Adszdak Aerecn Delem DA-66T graphic CNC control Euro-style top press brake tools Euro-style bottom press brake tools Laser safety guards Foot pedal Quick-release top tool clamps Rear safety doors Backgauge finger blocks Sheet support arms Notes: *Specifications are given in good faith but not guaranteed*

Condition: used, Year of construction: 2008, workpiece height (max.): 40 mm, controller model: PowerControl P85, working width: 1,550 mm, working length: 4,175 mm, TECHNICAL DETAILS Working area, X-axis: 4,175 mm Working area, Y-axis: 1,550 mm Maximum workpiece thickness: 40 mm Number of working areas: 2 Traverse speed, X-axis: 80 m/min Traverse speed, Y-axis: 80 m/min Traverse speed, Z-axis: 30 m/min Table system: Beam table with vacuum cups Number of vacuum cup beams: 8 Positioning: CNC-controlled Drilling unit Position: Top Vertical drilling spindles: 20 Horizontal drilling spindles in X-direction: 10 Milling unit Position: Top Controlled axes: 4 + Flex5 Motor power: 15 kW Cooling: Liquid cooling Tool changer: Automatic Sawing unit Position: Top Tool magazine: 2 slots Tool magazine 1: 18 slots Position of tool magazine 1: Rear of the machine Tool magazine 2: 10 slots Position of tool magazine 2: On the machining head MACHINE DETAILS Control system: PowerControl P85 Machine programming software: WoodWOP 5.0 Dodpfxez Ekfvj Adrecn EQUIPMENT Beam table with vacuum cups 8 vacuum cup beams Vacuum pump Automatic tool changer Liquid cooling PowerControl P85 control system WoodWOP 5.0 machine programming software Note: Tools not included The machine will be sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7350

Condition: used, Year of construction: 1998, machine/vehicle number: H981224, functionality: fully functional, power: 11 kW (14.96 HP), pressing force: 170 t, stroke length: 180 mm, operating speed: 8 mm/s, reverse speed: 80 mm/s, table width: 180 mm, table length: 4,230 mm, table height: 960 mm, throat depth: 410 mm, clearance between the columns: 3,760 mm, oil tank capacity: 150 l, total length: 4,500 mm, total width: 2,200 mm, total height: 2,900 mm, overall weight: 13 kg, Equipment: CE marking, documentation/manual, safety light barrier, This machine is still operational and can be inspected at the factory in Northern Germany. Working length: 4100 mm Distance between uprights: 3650 mm Pressing force: 170 tons Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Motor-adjustable rear stop Dedpfx Adez Imcpjrjcn Overhang: 300 mm Stroke: 200 mm Crowning Working height: 960 mm Motor power: 13 kW Dimensions (length x width x height): approx. 4500 x 2200 x 2900 mm Weight: approx. 14 tons Accessories: 1 set of tools

Condition: used, functionality: fully functional, total length: 2,040 mm, total width: 650 mm, total height: 2,040 mm, overall weight: 185 kg, input frequency: 50 Hz, The Koppens PR 400 breading machine is ideal for food companies looking to optimize the breading of their products. Thanks to its robust design, this machine ensures even, uniform breading, guaranteeing consistent quality for every product processed. In fact, it is perfectly suited to fine breading, meeting the exacting requirements of meat, fish and other food processing industries. What's more, the Koppens PR 400 offers remarkable flexibility with its adjustable speed and working height, enabling parameters to be adjusted according to specific production needs. With its 400 mm wide belt, it facilitates the continuous processing of large quantities of product, increasing production line efficiency. What's more, its stainless steel design ensures long life and impeccable hygiene, which is essential in food environments. Finally, this breading machine is easy to integrate into existing production lines, offering a complete solution for optimizing the breading process while guaranteeing high-quality results. In short, the Koppens PR 400 is an essential choice for improving the productivity and quality of breaded products. Technical specifications: Manufacturer: Koppens B.V. Machine designed for breading products Dcedeu E N Hvspfx Adron Suitable for fine breading Type: PR 400 Voltage: 380 V Three-phase Amperage: 3.1 A Frequency: 50 Hz Power rating: 0.96 kW Weight : 185 Kg Belt width: 400 mm Dimensions (L x W x H): 2040 x 650 x 2040 mm All stainless steel Adjustable speed Adjustable working height

Condition: excellent (used), Year of construction: 2012, operating hours: 6,000 h, functionality: fully functional, machine/vehicle number: 21534, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, workpiece weight (max.): 2,000 kg, table width: 700 mm, table length: 1,070 mm, overall weight: 12,500 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 5,000 h, spindle motor power: 15,000 W, number of slots in tool magazine: 38, Equipment: chip conveyor, documentation/manual, Very good condition, used for light milling. High-pressure coolant flushing through the center of the tool, 80 bar. HSK63A tool holder. Blum tool breakage detection. iTNC530 control system. Includes two vices and a pneumatic clamping device ITS100/P WT. Djdezw Rl Aepfx Adrscn Direct sale to end-users only. W-Technology s.r.o. Polní 8 79201 Bruntál Czech Republic

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 2,134 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, table width: 711 mm, table length: 2,134 mm, table load: 1,814 kg, overall weight: 11,650 kg, spindle speed (max.): 8,100 rpm, number of spindles: 1, number of slots in tool magazine: 31, Equipment: chip conveyor, CNC Milling Machine HAAS VF-7/40 TECHNICAL DATA: - Date of manufacture September 2014 - X 2 134 mm - Y 813 mm - Z 762 mm - Control HAAS - Spindle speed max. 8 100 rpm - Table size 2 134 x 711 mm - Spindle nose to table 102 – 864 mm - Tool magazine 31 positions (SK40) - Spindle power 22.4 kW - Machine dimensions 5.5 x 2.7 x 3.3 m - Weight approx. 11 650 kg Machine in very good technical condition, connected to power – it can be inspected and tested on site by prior appointment. Professional loading is included in the price. Accessories, tooling and clamping devices shown in the photos are part of the offer only if listed under equipment. Dcodpfez H U Dljx Adrjn Technical data is for reference only and may contain inaccuracies. Subject to prior sale.

Condition: used, Year of construction: 2006, functionality: fully functional, power: 37 kW (50.31 HP), filter area: 169 m², total height: 5,950 mm, total length: 4,650 mm, total width: 2,250 mm, For sale is a complete industrial Aagaard/Finnrose dust extraction and filtration system, manufactured in 2006, from a wood processing facility. The system is designed as a screw filter and includes a complete dust extraction control system with heat recovery. The main fan is an Aagaard AVD 40 HF/240 with 37 kW. The filter system has approximately 169 m² of filter area with a total of 128 filter elements, each approximately 2,000 mm long and Ø 210 mm. The discharge is carried out via a discharge screw and a rotary valve airlock. Below the discharge is a matching hopper with approximately 6 m³ volume on a mobile trolley, which is included in the scope of supply. The complete control cabinet for the dust extraction control and heat recovery is part of the system. The control cabinet includes, among other things, the controls for the rotary valve airlock, discharge screw, and four cleaning groups, as well as a Schneider-Electric frequency inverter for the dust extraction fan. Technical data: Aagaard / Finnrose industrial dust extraction system / screw filter Year of manufacture: 2006 Main fan: Aagaard AVD 40 HF/240 Motor power main fan: 37 kW Filter area: approx. 169 m² Filter elements: 128 pieces Dimensions filter elements: approx. Length 2,000 mm / Ø 210 mm Electrical system: 3 × 400/230 V, 50 Hz Rated current control cabinet: 160 A Discharge via discharge screw and rotary valve airlock 4 cleaning groups Dcjdpez Ik Atefx Adren Complete control cabinet for dust extraction control and heat recovery Frequency inverter for main fan Heat recovery / return air system available 6-m³ hopper on mobile trolley included Existing steel substructure can be taken over Extensive existing piping can be included by agreement Dimensions: Filter tower incl. rotary valve airlock: approx. 5,950 × 2,280 × 4,632 mm (L × W × H), height from steel substructure. Steel substructure: approx. 5,500 × 2,800 × 2,250 mm (L × W × H from the ground). Total height of filter tower incl. substructure: approx. 6,882 mm. Availability / Dismantling: Sale possible immediately. The system is located at CH-3608 Thun, Switzerland. The complete dismantling and removal must be completed no later than July 31, 2027. Dismantling, loading, transport, and any customs clearance will be carried out entirely by the buyer at his own cost and responsibility. All necessary skilled personnel, lifting equipment, cranes, and transport means must be organized by the buyer. Inspection possible by appointment. Sale from location in the existing condition. Technical specifications provided to the best of our knowledge, without guarantee; inspection by the buyer before purchase is recommended. Selling price: 29,500 EUR Price net, any statutory taxes and duties are additional. Export, customs clearance, and import duties are the responsibility of the buyer.

Condition: used, Year of construction: 2006, operating hours: 18,985 h, overall weight: 2,600 kg, This FERROMATIK MILACRON K-TEC 40 injection molding machine is being auctioned online as part of our industrial auction / machine auction, which involves the liquidation of a well-known toy manufacturer’s site – injection molding machines, warehouse equipment, and logistics accessories – STEP 3. Dcsdpfx Aez H R Erjdrjn You can find this and many other items on our platform.

Condition: ready for operation (used), Year of construction: 1962, machine/vehicle number: E 557, functionality: fully functional, pressing force: 40 t, stroke length: 125 mm, table width: 400 mm, table length: 1,000 mm, overall weight: 3,900 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Press force Max. press force: 40 t Stroke: 125 mm Max. operating pressure: 15.7 MPa Installation height: 650 mm Stand extension: 400 mm Ram adjustment: 125 mm Work table Table length: 1,000 mm Table width: 400 mm MACHINE DETAILS Machine type: Hydraulic press brake Type: E 40-1000 Year of manufacture: 1962 Dcsdpfoz Izdnsx Adren Factory number: E 557 Total weight: 3,900 kg Condition: Used, fully functional

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 99582017668, mount diameter: 100 mm, total width: 510 mm, total length: 2,264 mm, total height: 2,035 mm, input voltage: 230 V, overall weight: 300 kg, table length: 1,294 mm, table width: 510 mm, table height: 800 mm, travel distance X-axis: 400 mm, travel distance Z-axis: 400 mm, compressed air connection: 8 bar, Equipment: documentation/manual, The tool presetter is located in our demonstration center and was used for demonstration purposes. The presetter is in excellent condition as it was only used for demonstrations. Technical data: Year of manufacture: 2023 Measuring range Z: 400 mm Diameter X: 400 mm Jaw width X: 100 mm Dcedpfx Aez D Ax Eodrjn Premium base cabinet system, including magnetic board and adapter storage for 6 adapters (tools). Includes SK50 inserts. SK50: SK, BT, BBT, ANSI, CAT 40 Optional equipment: Pneumatic spindle brake "Premium Technology" package Up-lighting - Adjustable up-lighting for cutting tool inspection Edge finder - For quick locating of cutting tool edges Release by touch - Intelligent sensor control for axis movement Manual fine adjustment Delivery: Pick-up

Year of construction: 1999, condition: defective spare-parts repository (used), functionality: limited functionality, machine/vehicle number: T4-0899, Excel-Csepel DFS 380 lathe (T-400/600) with Sinumerik 810D/CNCkon, year of manufacture 1999 – machine for hobbyists Condition: operational, but for sale only as a hobbyist/repair machine – no guarantee of continuous functionality Year of manufacture: 1999 Location: Western Saxony Price: negotiable Technical data: Manufacturer: Excel Csepel Machine Tools Ltd. (Hungary) Type: DFS 380, nameplate designation T-400/600 Machine No.: T4-0899 Control: Siemens Sinumerik 810D with CNCkon Total connected load: 30 kW Connection values: 3×400 V / 50 Hz, control voltage 230 V AC / 24 V DC Max. turning diameter over bed: 535 mm / over slide: 380 mm Travel X: 230 mm, Z: 1,115 mm Main spindle drive: 18.5 kW (100% duty cycle), speed 35–3,500 rpm Spindle head A8 according to DIN 55026, spindle bore 82 mm, max. bar diameter 70 mm Dcsdpfx Aezw Ea Iedren Feed axes: FANUC AC servo motors, rapid traverse X 15 m/min, Z 20 m/min Turret: TOEM 200 „06“, 12 tool positions, tool holder DIN 69880, Ø 40 mm Tailstock: hydraulic, stroke 150 mm, internal taper MK4 Weight: approx. 8,300 kg, dimensions L×W×H: 3,690 × 1,750 × 1,900 mm Condition/Special features (technical honesty): The machine is fundamentally operational and, thanks to the integrated correction electronics (CNCkon), is in principle very accurate. However, this accuracy is impaired by existing spindle play (approx. 2–3 hundredths of a mm). The machine is therefore primarily suitable for experienced buyers who are willing to repair or rework the spindle play themselves. Therefore, it is explicitly sold as a hobbyist/self-repair machine, without any assurance of permanent production suitability. Description: For sale is an Excel-Csepel DFS 380 lathe (nameplate T-400/600), year of manufacture 1999, with Siemens Sinumerik 810D control and CNCkon correction electronics. The machine is functional and runs, but has a spindle play of approx. 2–3 hundredths of a mm, which limits the achievable accuracy. Suitable for technically skilled buyers or as a hobbyist/spare parts machine. Further technical data see above. Inspection at the location in Western Saxony possible by arrangement. Sold without guarantee and warranty, negotiable. Other machines available from site clearance Site takeover negotiable

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 416158, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 250 mm, spindle speed (max.): 20,000 rpm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time between November 16, 2026, and November 26, 2026! TECHNICAL DETAILS Travel range X-axis: 1,200 mm Travel range Y-axis: 900 mm Travel range Z-axis: 250 mm Z-axis through-hole: 200 mm T-slot clamping table: 1,250 × 1,000 mm Table dimensions: approx. 1,250 × 1,000 mm Spindle speed: max. 20,000 rpm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,400 x 1,700 x 1,900 mm Weight: 750 kg EQUIPMENT Documentation Accessories Dcodpfx Asz Il Rrjdrjn Note: The tool changer is not installed. External reference: Wup - Lot 16

Condition: used, Year of construction: 2006, operating hours: 18,985 h, functionality: unexamined, machine/vehicle number: 513426, clamping force: 400 kN, injection pressure: 2,292 bar, overall weight: 2,600 kg, input frequency: 50 Hz, input voltage: 400 V, This FERROMATIK MILACRON K-TEC 40 injection molding machine, manufactured in 2006 with approximately 19,000 operating hours, will be auctioned off in our online auction "Liquidation of a well-known toy manufacturer – injection molding machines, warehouse equipment, logistics accessories - STEP 3". You can find this and many other items from the field of injection molding and plastics technology, warehouse and conveyor technology, as well as workshop equipment on our RESTLOS auction platform. Machine details: including peripherals installed on the machine Year of manufacture: 2006 Clamping force: 400 kN International size: 400H-265 Injection pressure: 2292 bar Displacement: 99 cm³ Weight: 2,600 kg Reported operating hours as of March 10, 2025: 18,985. Dcjdpjz Erx Rofx Adron The machine has already been disconnected from the power supply and can no longer be switched on; all fluids are still in the machine, as stated.

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 350 153 09 095, overall weight: 180 kg, input voltage: 400 V, We are offering this ready-to-use Meurer CMW/AL 60/40 angle welding machine, manufactured in 1995. Manufacturer: Meurer Model: CMW/AL 60/40 Year of manufacture: 1995 Welding current range: 60–400 A Dodpoz Ii Uzjfx Adrscn Open-circuit voltage: 60 V Mains voltage: 400 V Frequency: 50 Hz Duty cycle: 60% at 400 A Protection class: IP21 Weight: 180 kg If you have any questions or require further information, please do not hesitate to contact us by sending a message or calling us.

Condition: used, functionality: fully functional, machine/vehicle number: 4816, Year of construction: 1998, operating hours: 8,935 h, load capacity: 4,000 kg, lifting height: 4,500 mm, fuel type: diesel, mast type: simplex, construction height: 3,100 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Dsdpsz I Ri Hsfx Adrecn Lifting height: 4,500 mm Overall height: 3,100 mm Load capacity: 4,000 kg MACHINE DETAILS Mast type: Standard Vehicle type: Side loader ISO class: ISO Class 3 = 2,500–4,999 kg Operating hours: 8,935 h External reference: SL14282SP

Condition: ready for operation (used), Year of construction: 1990, L & Z Lathe AFM TUG 40 Dcedpfx Adez Ixl Aorsn Type TUG 40 Year of manufacture 1990 Center height 200 mm Diameter over slide 280 mm Turning length 1500 mm Drive power 5.5 kW Spindle speeds 18 - 1600 rpm Spindle bore 52 mm Chuck, Lynette, steel tool holder Multifix with inserts Price: Euro 2,250.00 plus VAT, ex works.

Year of construction: 1995, condition: ready for operation (used), Immediately available at location: Boschert punching nibbling machine Type KST 40 / 750 PowerLine digital Year of manufacture 1995 Press force 40 tons Stroke height 40 mm Punch diameter max 105 mm Sheet thickness max 10 mm Extension tables left and right Quick-change system Digital backgauge system x-axis 0 – 1500 mm left y-axis 0 – 750 mm Tools Weight 3 tons Dsdpfx Adjz Ixh Rsrocn At the price of Euro 2,000.-- plus VAT ex location.

Condition: excellent (used), Year of construction: 2011, operating hours: 22,001 h, functionality: fully functional, travel distance X-axis: 1,800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, table width: 750 mm, table length: 2,050 mm, Travel distances: X-axis: 1800 mm Y-axis: 800 mm Z-axis: 600 mm Table size: 2050 x 750 mm Spindle speed: 0-8000 RPM Spindle hours: 6626 hrs Tool holder: SK40 Dcjdpjzl Uxpofx Adrjn Tool magazine: 30 positions Installation dimensions: approx. Width: 6500 mm Depth: 4400 mm Height: 4000 mm Weight: 12000 kg Machine hours: 22001 hrs Accessories: - Documentation