Used Scheugenpflug A310 K4750-X11 for sale (227)

Condition: used, functionality: fully functional, Scheugenpflug A310 K4750-X11 Material Preparation and Feeding unit. The all-round system A310 simultaneously prepares the dispensing material while loading it from the barrel. Temperature control also helps to optimise the viscosity of the dispensing medium. The applied vacuum evacuates air trapped in the material already during preparation. Degassed material is required for a bubble-free dispensing process. Circulating the dispensing material continuously prevents sedimentation of the contained filler materials and keeps the properties of the dispensing material components at a constant level. The stirring intensity is adjusted to the dispensing material being prepared. Used for l Materials: • One and two component • Liquid to medium viscous • Non-abrasive to highly abrasive • Non-filled to highly filled Technical Data: • W x H x D (1C-60 l) 700 x 1950 x 1000 mm W x H x D (2C-60/60 l) 700 x 1950 x 1400 mm • Weight: 240 kg (1C-60 l) 400 kg (2C-60/60 l) • Feeding volume: 250 ml/stroke • Power supply: 3~ 400 V, 50/60 Hz, CEE 16 A • Ejector evacuation power: 12 l/min (at 6 bar) • Vacuum pump evac. power: 242 - 283 l/min • Heating capacity: up to 80°C • Peripheral speed of agitation blade: 39 rpm • Tank heater power: (230 V) approx. 1000 W Hjdpfjtp Df Hex Adzsr Good working condition. Please check out our other listings as well.

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: SNDE106744, input voltage: 400 V, input frequency: 50 Hz, Vacuum casting system was used to cast epoxy resin into plastic housings Hjdpfx Asvnrz Djdzjr

Year of construction: 2023, condition: ready for operation (used), A Scheugenpflug material preparation and feeding unit is available. Two-component Scheugenpflug LiquiPrep LP804 20/20 machine, year of manufacture: 2023, tank volume: 50l/20l, machine dimensions X/Y/Z: approx. 1500mm/800mm/2050mm, weight: approx. 430kg, operating hours: 0h. The machine is as new and still in its original packaging. Documentation available. An on-site inspection is possible. Hjdpfx Adozkvk Rszsr

Year of construction: 2013, condition: excellent (used), Scheugenpflug DOS P016 Piston Dispenser DOS P Piston Dispensing System For a wide range of requirements Scheugenpflug piston dispensing systems operate on the principle of volumetric dispensing; the quantity of material dispensed is mechanically determined by the geometry and stroke of the associated cylinders. The cylinder is filled with the potting material via a connected material supply system. When a two-component medium is used, the ratio of resin to hardener is simultaneously determined by the volumes of the two cylinders. The dispensing pistons simultaneously force both components through separate channels toward the outlet valve, where they only mix within the static mixing tube to form a homogeneous, reactive medium. The DOS P016 / 050 / 100 / 300 / TCA piston dispensing systems are high-precision volumetric units designed to process both single-component (1K) and two-component (2K) materials, covering a wide spectrum of application requirements. Precisely dimensioned dispensing cylinders ensure the delivery of reproducible material volumes. For 2K materials, the parallel emptying of both cylinders into the shared mixing tube ensures a consistently stable mixing ratio at all times, thereby guaranteeing maximum process reliability. At the same time, this method allows for the gentle handling of potting media that are sensitive to pressure, moisture, or shear forces, without the risk of material degradation. Users also benefit from quick and easy maintenance, long service lives, and significantly reduced upkeep costs. Optional features—such as valve monitoring, mixing tube heating, or dispensing head heating—allow these systems to be flexibly adapted to specific application requirements. Your benefits Dosing accuracy independent of temperature, pressure, or viscosity Constant mixing ratio at all times due to parallel emptying of dosing cylinders Wide range of applications (in terms of materials and use cases) Key functions Simultaneous cylinder discharge via a shared stroke mechanism ensures a homogeneous mixing ratio Sensor-based monitoring of inlet and outlet valves as well as cylinder filling Material temperature control via mixing tube heating (optional) Camera-based dispensing needle monitoring (optional) Product data General Materials: 1K and 2K Viscosity: From liquid to high-viscosity Fillers: Filled and/or abrasive media Operating principle: Volumetric dispensing Properties Constant mixing ratio for 2K Independent of temperature, material feed pressure, and casting resin viscosity Precisely reproducible and highly accurate results Maximum process reliability Applications Potting, sealing, bonding, application of thermal interface materials, sealing, encapsulation (Glob Top) DOS P016 Max. volume/shot (2K at 1:1 ratio) 1K: 0.06/17 ml 2K: 0.1/32 ml Max. dispensing speed [ml/s]: 2 Dispensing accuracy at max. stroke [%]: < 0.5 Heatability [°C]: up to 80 Outlets: 1K: 1–4, 6, 8 2K: 1–4 Weight: 14 kg Dimensions (W x H x D) 290 x 350 x 230 mm Video on operation Hsdozc Nplepfx Adzjr "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find additional dosing units—new and used—in our shop! International shipping costs available upon request!

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, The Scheugenpflug dosing system K06399 is a stand-alone dosing machine. The unit is specifically configured to dispense DOWSIL 744 from a 20 kg Hobbock. It features the following axes: X, Y, Z, needle pivotable 45°, carrier rotatable with a lift/rotate unit. A needle cleaning and measuring station is included. Hjdpsua Acqofx Adzer The Bosch conveyor belt for the carriers has a fixed width of 400 mm (non-adjustable). Please note: originally, the unit was equipped with inlet and outlet buffers—these components are no longer present, the pictures only illustrate them for reference. Inlet and outlet buffers are no longer included—they are shown for understanding only. / years, not used in the last 2 years due to change of product line.

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 133106 & 133312, New material feeder, system Pailfeed PF803, year of manufacture 2024, unused, including control unit DS 503. Designed for reliable, clean, and bubble-free conveying of medium- to high-viscosity single-component materials from a container. Dispense module not included! Two units available. Please specify the desired quantity with your offer. Optional accessories such as UV-curing devices are offered separately. Supplier: Dr. Hönle AG. --- Please quote your price offer. Sale only within Europe (EU), including Turkey, Great Britain, and Switzerland. --- Technical specifications can be found in the handout. Supplied without packaging; all warranty rights are excluded. Should you wish to dismantle the system yourself, please note this in your offer. We do not assume any liability for the accuracy of the technical data, for the completeness of accessories and tool equipment, or for compliance with all safety and environmental protection requirements specified in accident prevention regulations. Hodpfx Adsw Dd Rzjzor

Year of construction: 2015, condition: excellent (used), The drum follower plate system A280 has the proven Scheugenpflug double-piston pump. This pump only comes into contact with material on one side, while a flushing liquid on the rear ensures that abrasive fillers do not get caught on the seals. With this system, highly abrasive, pasty media can be conveyed continuously and reliably with an unrivaled service life. 2 Component Follower Plate System. Hedpfxsif Ug Eo Adzer

Condition: like new (used), Atlas Copco / Scheugenpflug The entire system is unused and in new condition. Type: VDS P6030 Automatic processing of a complete process from loading to unloading. Mixing of two components (e.g., resin and hardener) directly in the process. Precise application of the material at defined positions on the workpiece. Movement of parts via a 3-axis system (X, Y, Z). Operation in automatic, semi-automatic, and manual mode. Technical data: Power connection: 400 V AC, 50/60 Hz Rated current: 13.6 A Power consumption: 8.5 kVA Fuse rating: 3 × 32 A Control voltage: 24 V DC Operating pressure: 6 bar Pressure monitoring: 4 bar Compressed air connection: 6 bar Operating temperature: +10 °C to +40 °C Storage temperature: −20 °C to +60 °C Humidity: 10 % to 85 % (without condensation) Enclosure protection class: IP21 Foundation inclination: max. 0.05 % Clearance around the machine: 0.8 m Clearance in front of the control cabinet: 1.2 m Width: 1660 mm x Height: 2305 mm x Depth: 1315 mm Weight: 600 kg Sound pressure level: ≤ 70 dB(A) Type: A310 Technical data: Tank volume: 60 l resin and 20 l hardener Stirrer in each tank Vacuum sensor per tank Level sensors including overfill protection Intake valve per tank Sight glass with lighting Vacuum degassing directly in the tank Material circulation to prevent sedimentation Optional tank heating Pneumatically driven piston pumps Delivery volume approx. 294 cm³ per stroke 1 or 2 pumps per tank possible Continuous delivery in a dual pump system Pump variants horizontal and vertical for highly viscous materials Vacuum generation via vacuum pump or ejector Oil separator to protect the vacuum pump Control via SCP touch panel Operating modes: automatic, pause, external control Material circulation in pause mode Connection to external control via interface possible Monitoring of production time, system availability, and material consumption Calculation of the remaining material availability Supply: 230 V or 400 V AC Operation outside the EU with a transformer possible Operating temperature: +5 °C to +40 °C With vacuum pump: +10 °C to +40 °C Humidity: 10 to 80 percent Protection class: IP20 Dimensions: Width 700 mm x Height 1950 mm x Depth approx. 1165 mm Weight: approx. 400 kg Type: LP804 Hodpfx Adey Naf Eozor Technical data: Application: Conveying and processing of 1-component and 2-component dispensing materials (low to medium viscosity, also abrasive) Tanks have 50 and 20 liters Control voltage: 24 V DC Power connection: according to wiring diagram Rated current: according to wiring diagram Power consumption: according to wiring diagram Fuse rating: according to wiring diagram Operating pressure: 6 bar Pressure monitoring: 4 bar Operating temperature: +10 °C to +40 °C Storage temperature: −20 °C to +60 °C Humidity: 10 % to 85 % (non-condensing) Enclosure protection class: IP54 Protection class entire system: IP20 Installation surface: max. 0.5 % inclination Clearance around the system: 0.8 m Clearance in front of the control cabinet: 1.2 m Width: 1500 mm x Height: 2050 mm x Depth: 770 mm Weight: 430 kg Scheugenpflug SNDE121196 ZES 217955 Dimensions: L 212 cm / W 209 cm / H 215 cm / Scheugenpflug SNDE121197 ZES 217958 Dimensions: L 190 cm / W 190 cm / H 220 cm / 430 kg (machine) + 100 kg Scheugenpflug SNDE118236 ZES 216335 Dimensions: L 200 cm / W 100 cm / H 220 cm / Noise level: ≤ 70 dB(A) Condition: unused Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) Further questions can be clarif

Condition: used, 5000 kg length 4000 mm width 1300 mm Hodey Ezztjpfx Adzsr height 620 mm lenkbar star gear diameter 420 mm weight of the machine ca. 0,8 t dimensions of the machine ca. 4,0 x 1,3 x 0,62 mm Heavy-duty trailer - Solid rubber tires - New plywood floor

Condition: new, GRATINGS FOR PALLET RACKING 270CM/110CM SHELVING BAYS Gratings for pallet racking 270 cm x 110 cm bays Data : - Length per module : approx. 890 mm - Width per module : approx. 989 mm - total width : approx. 2670 mm - total depth : approx. 1095 mm - suitable for 2700 x 1100 mm shelf bays - 1 level consists of 3 pcs. Gratings - Edging : T-profile 42 mm - Mesh size : 80 x 40 mm - Load capacity: 1000 kg per grating, with evenly distributed load - Surface : hot-dip galvanized - New from stock -AVAILABLE SEVERAL TIMES! Price: 189,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs for this depend on the postal code. Hedpszqah Hefx Adzjr Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: ready for operation (used), functionality: fully functional, shelf height: 4,000 mm, Nedcon frames – approx. 400 x 110 cm | inspected & used These Nedcon frames, measuring approximately 400 x 110 cm, come from our inspected used stock and are available immediately from our warehouse. They are ideally suited for expanding existing Nedcon pallet racking and heavy-duty shelving systems. Thanks to their robust construction, the frames can be reliably used in daily warehouse operations. We can also offer suitable crossbars upon request. Data: Height: 400 cm Depth: 110 cm Color: Blue Shelving system: Nedcon Used, in stock, available for immediate delivery Hedpfx Aozpv Rnedzer -- MULTIPLE UNITS AVAILABLE IMMEDIATELY -- Price: Negotiable You will receive an invoice with VAT shown. STILL HAVEN'T FOUND WHAT YOU'RE LOOKING FOR? Visit our website, where you'll find a quick overview of many offers and variations of the articles! Transport: Delivery can be arranged through our partner shipping company, if desired; the costs depend on the postal code. Installation: Our trained staff will be happy to assist you with the professional assembly and disassembly of your equipment, if required. Our recommendation: Let us know your requirements... We will gladly help you with the implementation of your projects, from planning to ordering to installation. ARE YOU INTERESTED OR DO YOU HAVE QUESTIONS? Simply contact us via message or phone call. You can find our telephone number on our company page. ☎️ You can reach us by phone from Monday to Friday, from 08:00 to 15:00. Alternatively, you can send us a message with your name and number, and we will get back to you as soon as possible.

Condition: ready for operation (used), functionality: fully functional, shelf height: 3,500 mm, Nedcon frames – approx. 350 x 110 cm | inspected & used These Nedcon frames, measuring approximately 350 x 110 cm, come from our inspected used inventory and are available immediately from stock. They are ideal for expanding existing Nedcon pallet racking and heavy-duty racking systems. Thanks to their robust construction, the frames can be reliably used in daily warehouse operations. We can also offer matching crossbeams upon request. Data: Height: 350 cm Depth: 110 cm Hjdpfx Aozpv N Dodzjr Color: Blue Racking system: Nedcon Used item, available from stock, ready for immediate delivery -- MULTIPLE UNITS AVAILABLE IMMEDIATELY -- Price: Negotiable You will receive an invoice with VAT shown. HAVEN'T FOUND WHAT YOU'RE LOOKING FOR YET? Visit our website, where you will find a quick overview of many offers & variations of the products! Transport: Delivery can be arranged through our partner shipping company upon request; the costs depend on the postal code. Assembly: Our trained staff will be happy to assist you with the professional assembly and disassembly of your equipment, if required. Our recommendation: Let us know your needs... We will gladly help you with the implementation of your projects, from planning to ordering and assembly. ARE YOU INTERESTED OR DO YOU HAVE ANY QUESTIONS? Simply contact us via message or phone. You can find our phone number on our company page. ☎️ You can reach us by phone from Monday to Friday, 08:00 - 15:00. Alternatively, you can send us a message with your name and number, and we will get back to you as soon as possible.

Condition: ready for operation (used), functionality: fully functional, total length: 2,700 mm, total height: 110 mm, total width: 40 mm, load capacity: 3,000 kg, Nedcon Traverse PR2 – approx. 270 cm | inspected & used The Nedcon Traverse PR2, with a length of approximately 270 cm, comes from our inspected used inventory and is immediately available from stock. It is ideal for expanding existing Nedcon pallet racking and heavy-duty shelving systems. Thanks to its robust design and high load-bearing capacity, the traverse can be reliably used in daily warehouse operations. We can also offer suitable frames upon request. Data: Length: 270 cm Height: 11 cm Width: 4 cm Racking system: Nedcon Type: PR2 Load capacity: up to 3000 kg Product number: CC1104015 Used item, available from stock, immediately deliverable -- MULTIPLE UNITS AVAILABLE IMMEDIATELY -- Price: Negotiable You will receive an invoice with VAT shown. HAVE YOU NOT FOUND WHAT YOU ARE LOOKING FOR YET? Visit our website, where you will find a quick overview of many offers and variations of the articles! Transport: Delivery can be arranged by our partner shipping company upon request; the costs depend on the postal code. Assembly: Our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment, if required. Hsdpfx Adjzpv Nwszjr Our recommendation: Please let us know your requirements… We will be happy to help you realize your projects, from planning to ordering to assembly. ARE YOU INTERESTED OR DO YOU HAVE ANY QUESTIONS? Simply contact us via message or phone. You will find our telephone number on our company website. ☎️ You can reach us by telephone from Monday to Friday, 08:00 - 15:00. Alternatively, you can send us a message with your name and number, and we will get back to you as soon as possible.

Condition: new, Year of construction: 2026, machine/vehicle number: EAN0729389556525, load capacity per storage section: 3,000 kg, total length: 44,800 mm, total height: 4,500 mm, load per truss pair (max.): 3,000 kg, number of shelf rows: 4, frame height: 4,500 mm, clear span: 3,600 mm, clearance between the columns: 3,600 mm, frame width: 1,100 mm, shelf height: 4,500 mm, shelf length: 44,800 mm, support length: 3,600 mm, 4 rows of pallet racking (M45113615-3) each 11.3 m long, 4.5 m high, 1.1 m deep, each with 3 bays, 3.6 m wide, Hedpfx Aszqyn Tedzer each with 3 crossbeam levels, load capacity per bay 3000 kg. - 16 frames (RM4511 - RAL5019) - 32 base plates, shims, screws - 64 floor anchors (ZZBA1210) - 72 single crossbeams, 3.6 m long (T3615 - RAL2008) - 4 load capacity signs (BSMcP) Frames are bolted together, not pre-assembled. Freight/Delivery: - max. 20 working days after receipt of payment - delivery free to construction site/assembly location - unloading from the truck is carried out by the buyer using their own lifting equipment - deliveries are made throughout the Federal Republic of Germany; excluding islands! Deliveries to EU countries are possible by individual agreement.

Condition: new, Year of construction: 2026, machine/vehicle number: EAN0729389556525, load capacity per storage section: 3,000 kg, total length: 44,800 mm, total height: 4,500 mm, shelf height: 4,500 mm, support length: 3,600 mm, shelf length: 44,800 mm, frame height: 4,500 mm, load per truss pair (max.): 3,000 kg, frame width: 1,100 mm, number of shelf rows: 4, clear span: 3,600 mm, clearance between the columns: 3,600 mm, 4 rows of pallet racking (M45113615-3) each 11.3 m long, 4.5 m high, 1.1 m deep, each with 3 bays, 3.6 m wide, each with 3 crossbeam levels, load capacity per bay 3000 kg. - 16 frames (RM4511 - RAL5019) Hodpfx Aszp Dv Eedzor - 32 base plates, shims, screws - 64 floor anchors (ZZBA1210) - 72 single crossbeams, 3.6 m long (T3615 - RAL2008) - 4 load capacity signs (BSMcP) Frames are bolted together, not pre-assembled. Freight/Delivery: - max. 20 working days after receipt of payment - delivery free to construction site/assembly location - unloading from the truck is carried out by the buyer using their own lifting equipment - deliveries are made throughout the Federal Republic of Germany; excluding islands! Deliveries to EU countries are possible by individual agreement.

Condition: new, Year of construction: 2026, machine/vehicle number: EAN0729389556525, load capacity per storage section: 3,000 kg, total length: 44,800 mm, total height: 4,500 mm, clearance between the columns: 3,600 mm, shelf height: 4,500 mm, number of shelf rows: 4, clear span: 3,600 mm, frame height: 4,500 mm, frame width: 1,100 mm, load per truss pair (max.): 3,000 kg, shelf length: 44,800 mm, support length: 3,600 mm, 4 rows of pallet racking (M45113615-3) each 11.3 m long, 4.5 m high, 1.1 m deep, each with 3 bays, 3.6 m wide, each with 3 crossbeam levels, load capacity per bay 3000 kg. - 16 frames (RM4511 - RAL5019) Hsdjzpfa Sopfx Adzsr - 32 base plates, shims, screws - 64 floor anchors (ZZBA1210) - 72 single crossbeams, 3.6 m long (T3615 - RAL2008) - 4 load capacity signs (BSMcP) Frames are bolted together, not pre-assembled. Freight/Delivery: - max. 20 working days after receipt of payment - delivery free to construction site/assembly location - unloading from the truck is carried out by the buyer using their own lifting equipment - deliveries are made throughout the Federal Republic of Germany; excluding islands! Deliveries to EU countries are possible by individual agreement.

Condition: new, Year of construction: 2026, machine/vehicle number: EAN0729389556525, load capacity per storage section: 3,000 kg, total length: 22,400 mm, total height: 4,500 mm, clearance between the columns: 3,600 mm, shelf height: 4,500 mm, number of shelf rows: 2, frame height: 4,500 mm, frame width: 1,100 mm, load per truss pair (max.): 3,000 kg, shelf length: 22,400 mm, support length: 3,600 mm, 2 rows of pallet racking (M45113615-3) each 11.2 m long, 4.5 m high, 1.1 m deep, each with 3 bays, 3.6 m wide, each with 3 beam levels, load capacity 3000 kg. - 8 upright frames (RM4511 - RAL5019) - 16 base plates, shims, fastening material - 16 floor anchors (ZZBA1210) - 36 individual beams (T3615 - RAL2008) Hedezl N Apspfx Adzor - 2 load capacity signs (BSMcP) Frames are bolted, not pre-assembled. Freight / Delivery: - max. 20 working days after payment receipt - delivery free to construction site / assembly location - unloading from the truck is carried out by the buyer using their own lifting equipment - deliveries are made to the entire territory of the Federal Republic of Germany; excluding islands! Deliveries to EU countries are subject to individual agreement.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, load capacity per storage section: 1,500 kg, total length: 34,000 mm, total height: 4,500 mm, shelf height: 4,500 mm, number of shelf rows: 3, load capacity: 13,500 kg, pallet spaces: 117 euro pallets, frame height: 4,500 mm, frame width: 1,100 mm, load per truss pair (max.): 4,500 kg, shelf length: 34,000 mm, support length: 2,700 mm, HEAVY DUTY PALLET RACKS 3 rows of pallet racks Each 11.3 m long, 4.5 m high, 1.1 m deep, Hsdozkb Hdspfx Adzjr Each with 4 bays, 2.7 m wide, Shelf load: 4,500 kg! Bay load: 13,500 kg! - 15 frames (RH4511) RAL5019 - 30 base plates, shims, fastening materials - 60 floor anchors (ZZBA1210) - 54 single beams (T27155!) RAL2008 - 3 load capacity signs (BSMcP) Frames bolted, not pre-assembled Freight / Delivery: - Max. 26 working days after payment received - Delivery to construction site / installation site included - Unloading from truck to be carried out by purchaser with own lifting equipment. - Deliveries to all areas of the Federal Republic of Germany, except islands! Deliveries to EU countries are possible by individual arrangement.

Condition: new, Year of construction: 2026, machine/vehicle number: EAN0729389556525, load capacity per storage section: 3,000 kg, total length: 44,800 mm, total height: 4,500 mm, clearance between the columns: 3,600 mm, shelf height: 4,500 mm, number of shelf rows: 4, clear span: 3,600 mm, frame height: 4,500 mm, frame width: 1,100 mm, load per truss pair (max.): 3,000 kg, shelf length: 44,800 mm, support length: 3,600 mm, 4 rows of pallet racking (M45113615-3) each 11.2 m long, 4.5 m high, 1.1 m deep, Hjdpfx Adozg Am Dezer each with 3 bays, 3.6 m wide, each with 3 beam levels, shelf load 3000 kg. - 16 frames (RM4511 - RAL5019) - 32 base plates, shims, screws - 64 floor anchors (ZZBA1210) - 72 single beams, 3.6 m long (T3615 - RAL2008) - 4 load capacity signs (BSMcP) Frames are bolted together, not pre-assembled. Freight / Delivery: - max. 20 working days after payment receipt - delivery to construction site / assembly location - unloading from the truck is carried out by the buyer using their own lifting equipment - deliveries are made to the entire territory of the Federal Republic of Germany; excluding islands! Deliveries to EU countries are subject to individual agreement.

Condition: new, Year of construction: 2026, machine/vehicle number: EAN0729389556525, load capacity per storage section: 3,000 kg, total length: 22,400 mm, total height: 4,500 mm, clearance between the columns: 3,600 mm, shelf height: 4,500 mm, number of shelf rows: 2, frame height: 4,500 mm, frame width: 1,100 mm, load per truss pair (max.): 3,000 kg, shelf length: 22,400 mm, support length: 3,600 mm, 2 rows of pallet racking (M45113615-3) each 11.2 m long, 4.5 m high, 1.1 m deep, each with 3 bays, 3.6 m wide, each with 3 beam levels, load capacity 3000 kg. - 8 upright frames (RM4511 - RAL5019) - 16 base plates, shims, fastening material - 16 floor anchors (ZZBA1210) - 36 individual beams (T3615 - RAL2008) - 2 load capacity signs (BSMcP) Frames are bolted, not pre-assembled. Freight / Delivery: - max. 20 working days after payment receipt Hodpezdcwrjfx Adzsr - delivery free to construction site / assembly location - unloading from the truck is carried out by the buyer using their own lifting equipment - deliveries are made to the entire territory of the Federal Republic of Germany; excluding islands! Deliveries to EU countries are subject to individual agreement.

Condition: good (used), Dimensions: Width: approx. 2,900 mm Height: approx. 1,038 mm Depth: approx. 1,100 mm Technical data for the workbench frame: Manufacturer: Jung Heinrich Type: T Included in the scope of supply: 02x workbench stands, used Material color: blue Stand height: 1,000 mm Stand depth: 1,100 mm Stand profile: 100 x 65 mm Includes cross and diagonal braces, base plates The stands are pre-assembled (welded framework) 02x workbench crossbeams, used Material color: yellow Box profile: 120 x 50 mm Crossbeam type: HN 120|25 Clear span: 2,700 mm 04x locking pins, used Design: fully galvanized 01x chipboard, 2nd choice, used Chipboard thickness: 38 mm Chipboard width: 2,900 mm Chipboard depth: 1,100 mm Chipboards may be in two parts 08x drilling screws, new Design: galvanized Dimensions: 6.3 x 70 mm The images serve to illustrate the material. The material color may vary. Hedpfx Aelnfi Rodzor - The workbenches are delivered disassembled; - The workbench stands are pre-assembled; - The production time is usually approx. 3 - 5 working days.

Condition: used, Empty weight: 4.100 kg Dimensions (LxBxH): 520 x 260 x 295 cm Serial number: 1 Trioliet SM-P1-12-ZK Feed Mixer Equipped with: Triotronic 2400V weighing system, control system, counter knives, unloading doors on the right and left, straw blower Overall dimensions: 5200x2600x2950 mm Curb weight: 4,100 kg Condition: shows signs of use, fully functional, gearbox needs inspection (making noise) Online auction of construction, agricultural, and industrial machinery (including: JOHN DEERE / DEUTZ-FAHR / CASE / NEW HOLLAND tractors, VOLVO / CATERPILLAR / HITACHI / KOMATSU excavators, wheel loaders, and MANITOU skid-steer loaders, aerial work platforms, FORD and MERCEDES-BENZ trucks, portable compressors, power generators, rollers, scissor lifts, various ROLLAND and KUHN agricultural machines, and off-road and workshop equipment, etc.), with most lots located at our own warehouse in Deinze, Belgium. The online auction opens Wednesday 22 July and closes Tuesday 4 August. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Monday 3 August Pickup days are on: - Tuesday 11 August - Tuesday 11 August - Thursday 13 August Hedszqa H Ajpfx Adzsr - Thursday 13 August Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: used, maximum load weight: 48,300 kg, overall weight: 63,000 kg, axle configuration: > 3 axles, first registration: 03/2025, next inspection (TÜV): 07/2027, Equipment: ABS, Excerpt from the equipment list. Complete equipment available upon request. Gooseneck with beveled front corners at approximately 45° and rear bevel of approximately 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring approximately 30 mm thick. Loading platform with double extension and rear bevel of approximately 500 mm x 8°. 5 pairs of lashing rings that can be folded outwards (LC 5,000 daN). 4 pairs of lashing rings that can be folded outwards (LC 10,000 daN). 1 pair of lashing rings mounted horizontally at the front of the loading platform (LC 10,000 daN). 1 intermediate table approximately 250 mm wide. Cutouts in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN). Hardwood flooring approximately 48 mm thick, with diamond plate flooring over the axles. Axles: BPW axles and suspension, all axles hydro-mechanically steered. Technical axle load: 12,000 kg each. Air suspension with lifting and lowering valve. Tires: 245/70 R 17.5 3PMSF, load index (146/146 F). Kingpin: JOST kingpin (mechanical) with 2-speed gearbox for approximately 24 t lifting capacity (approximately 50 t test load). Braking system: Complies with EU regulations, with EBS-E (4S3M) without connecting lines to the tractor unit. Paintwork: First-class and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer. High-quality 2-component (2K) topcoat, solid color in RAL 3002 carmine red. Rear section metallized and painted in RAL 9010 (pure white). Steel construction: Made of high-strength fine-grain steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa). Electrical system: Complies with EU regulations. Lighting: 24 Volt ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX on the front connecting strip with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098. Includes the following additional equipment: 2-inch kingpin. A galvanized steel front bulkhead, approximately 400 mm high. Yellow-red air couplings on the galvanized front connecting strip. 4 wheel chocks with holders on the front bulkhead. A spare wheel holder in front of the front bulkhead. Electro-hydraulic unit. Trailing steering at the front and rear, operable by cable remote control via push buttons, with single-axle control of the axles (without installation in the tractor unit). TPMS tire pressure monitoring system according to ECE R 14. Load gauge to determine the axle loads, including a load chart. Aluminum side walls and rear wall on the gooseneck, pluggable, approximately 2,440 x 400 mm (L x H). The rear galvanized plug-in profiles are removable (overall length approximately 2,560 mm). A galvanized toolbox, integrated in the beveled gooseneck. Hedjzqiitepfx Adzor 4 pairs of WADER container pockets in the loading platform for a 20', 2x 20', 40' or 45' container. 7 pairs of profile pockets for plug-in profiles approximately 100 x 50 mm in the outer frame of the loading platform. Extensions, galvanized, extendable by approximately 230 mm on each side. Sliding attachment rails for aluminum loading ramps at the rear of the vehicle. 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear. Lift axle on the front axle with control via TEBS E depending on the current axle load and the current load status. Central lubrication system with 2 BEKAMAX (Pico) pumps with normal grease NLGI-2, removable protective cover around the pumps. 2

Condition: used, maximum load weight: 36,515 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 05/2023, next inspection (TÜV): 05/2027, Equipment: ABS, Excerpt from Equipment List: Gooseneck: Gooseneck with front corners angled approximately 45° and rear taper of approximately 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). Hardwood decking approximately 30 mm thick. Extendable Loading Platform: Extendable loading platform with rear taper of approximately 1,000 mm x 8°. 5 pairs of lashing rings that fold outwards (LC 5,000 daN). 3 pairs of lashing rings that fold outwards (LC 10,000 daN). 1 pair of lashing rings lying horizontally at the front of the loading platform (LC 10,000 daN). Hardwood decking approximately 48 mm thick, with diamond plate decking over the axles. Axles: BPW axles and suspension, all axles with hydro-mechanical forced steering. Technical axle load: 12,000 kg each. Air suspension with lifting and lowering valve. Axle tool. Tires: Tires 245/70 R 17.5 3PMSF, load index (146/146 F) - manufacturer of our choice. Kingpin: JOST kingpins (mechanical) with 2-speed gearbox for approximately 24 t lifting capacity (approximately 50 t test load). Braking System: Braking system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit. Paintwork: First-class and durable corrosion protection of the standard shot-blasted welded frame is guaranteed by a 2-component (2K) zinc dust primer. A high-quality 2-component (2K) topcoat, solid color in RAL 3002 carmine red. Rear section metallized and painted in RAL 9010 (pure white). Metallic paint is not possible. Steel Structure: Steel structure made of high-strength fine-grain steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Hodpfxozqiias Adzer Electrical System: Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX on the connection bar at the front with sockets 24N, 24S & 15-pin. Connection according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Includes the following additional equipment: - 2-inch kingpin - One galvanized steel front wall, approximately 400 mm high. - Yellow-red air couplings on the galvanized connection bar at the front. - 4 wheel chocks with holder on the front wall (± 5kg) - One spare wheel holder in front of the front wall. - Electro-hydraulic unit (± 45kg) - Steering from the front and rear by means of a cable remote control with push buttons, with single-axle steering control (without installation in the tractor unit) - Mounting in the rear area of the gooseneck for aluminum loading ramps. - European reflector signs (red-yellow) on the rear of the trailer. - Yellow reflector tape according to EU regulations on the side, on the extendable section and at the rear of the trailer. - On the gooseneck and on the rear panel, one holder on the left and right for warning signs including socket. - One holder for a rotating beacon on the rear of the trailer. - Galvanized folding supports under the taper of the loading platform. - One mud flap on the rear of the trailer. - Manual and description on a USB stick. - Speed stickers 80 km/h on the rear and on both sides. - Load measuring device for determining the axle loads including load chart.

Condition: new, Year of construction: 2021, Mesh shelf/support shelves for pallet racking Data: Hjdpfxezqayps Adzjr - 3-part, galvanized, for 270 x 110 cm shelf ( 99 € net ) - 4-part, galvanized, for 360 x 110 cm shelf ( 132 € net ) - New from stock - Load capacity: 1000 kg per grid, with evenly distributed load -MULTIPLE AVAILABLE! Price: 99,00 € net + legally valid VAT. You will receive an invoice with VAT shown. Our recommendation: Let us know what you need... We will be happy to help you realize your projects, from planning and ordering to installation. Delivery is available on request at a reasonable price.