Used Schlatter Jig Welder for sale (436)

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, working width: 1,650 mm, wire diameter (max.): 7 mm, Schlatter MG930, quick change, DC welding machine with 5 DC transformer, 1092 kVA. Schlatter control from 2007 with S7-300 PLC. Automatic line wire loader up to 3m, automatic line wire channel positioning, open portal DC welding machine, quick change cross wire hopper, MLV1 pullout and stacker. Hsdpfjzd Sulox Ab Tjt

Condition: good (used), functionality: fully functional, We offer for sale a complete line for multi-point automatic welding of SCHLATTER brand steel wires. We have three fully operational production lines. There are also automatic machines for the production of transverse wires (so called slitting machines with a cutter). Hsdpstvpiljfx Ab Tst We also have a number of single point welding machines for steel wires.

Condition: ready for operation (used), Year of construction: 1995, machine/vehicle number: 060-8433, Cutting length: 3,500 mm Support carriage travel: 3,800 mm Bridge carriage travel: 3,500 mm Vertical adjustment: 400 mm Cutting wheel diameter: 625 mm Maximum cutting depth: 210 mm Blade drive motor: 12 kW, 2 speeds: 950 and 1,450 rpm Rotary table Laser Hsdpfxozl Hhvj Ab Tst

Condition: refurbished (used), SCHLATTER Welded wire mesh production line MG24 Full revamped WORKING RANGE Panel width: max. 2500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme warp wires: max. 2400 mm Mesh length (warp wire length): max. 2500 - 6000 mm Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Adjustable by cutting device (0-1) Hedswu Tu Dopfx Ab Tot Warp wire diameter: 4.0 - 12.0 mm Weft wire diameter: 4.0 - 12.0 mm Number of warp wires: max. 24 WELDING MESH MACHINE MG 24.1/8C, Basic equipment including: - 1 Machine frame - 1 Upper support for press reception, continuously adjustable by hand crank - 1 Magnet supports with retaining magnets and weft wire monitoring. - 1 Row of pneumatic solenoid valves for press actuation. - 1 Installation for air and water. - 2 Pneumatic rotary drives with oil damping - Static motor torque with 5 bar compressed air: 480 Nm - Front continuously adjustable from: 25 - 250 mm adjustable by cutting device (0-1) - 1 Advance carriage with panel lifting device - 1 Set of tools for machine adjustment WELDING SECTION 8 Type C Transformers Rated power of each transformer: 100 kVA No-load secondary voltage: 7.1 V Rated secondary current: 14 kA 8 Thyristor contactors ES 130 12 Welding presses: 5.0 kN 12 Chain current bridge for spacing of warp wires: 50-100 mm 12 Chain current bridge for spacing of warp wires (for offset warp wires): 100 mm 10 Chain current bridge for spacing of warp wires: 100-150 mm 8 Chain current bridge for spacing of warp wires (for offset warp wires): 150 mm 6 Chain current bridge for spacing of warp wires: 150 - 200 mm 6 Chain current bridge for spacing of warp wires (for offset warp wires): 200 mm 24 Lower electrode holders Cu with standard angled electrodes and each with a water-cooled current cable, width: 58 mm 24 Wire clamping pliers Panel width: max. 2500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme warp wires: max. 2400 mm Mesh length (warp wire length): max. 2500 - 6000 mm Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Warp wire diameter: 4.0 - 12.0 mm Weft wire diameter: 4.0 - 12.0 mm Number of warp wires: max. 24

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, working range: X-axis: 2.000 mm Y-axis: 1.200 mm Z-axis: 190 mm welding power: 20 kA welding force: 2 x 5 kN Hsdpfjy Er Uqsx Ab Tst

Condition: good (used), Year of construction: 1976, Spot welding machine, spot welding system, spot welding gun, resistance spot welding machine, lever-action spot welding machine -Stationary -Operation via hand switch -Arm length of welding machine: 350 mm Hjdpfx Asc N Uabsb Tot -Welding pliers type: -Steering -Machine dimensions: 1500/1000/H1670 mm -Machine weight: 774 kg -Dimensions of control cabinet: 1550/420/H1960 mm -Weight of control cabinet: 330 kg

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, WELIDING WORK STATION SCHLATTER WITH NEW MIYACHI WELDING CONTROLS. 1. 56 kWA - SERIAL NR: PS1/3111/9955 - MIYACHI DIGITAL CONTROLS 2. 80 kWA - SERIAL NR: PS1/9231/9956 - ORIGINAL SCHLATTER ANALOG CONTROLS Included with safety glass and two button pust operational system. with all safety system integrated and working table. WELDING NOMINAL POWER - 56 kWA AT 50% THROAT IN 450mm Specifications Manufacturer SCHLATTER Model P1-42-11-22 1C VU122S S55S Year 1989 Condition Used Stock Number 0048 Connection 380V/50Hz S max 135 kWA Arm distance min /max 218/468 in mm Hjdovk Ukmepfx Ab Tet Closing force 4KN Cooling water requirement 6 liter / min

Condition: excellent (used), Year of construction: 2003, working width: 215 mm, welding power (max.): 750 kVA, Complete Mesh welding/Lattice girder factory Factory consists : - Mesh welding line SCHLATTER PG 24 , Semi- automatic , Year - 2002 - Lattice Girder Line SMEI , Full automatic , Year - 2003 - Straightening and cutting machines 1x Wafios R4 Hodpfx Asqy Ek Asb Tot 2 x VITARI NR16 1X VITARI NR10 - Cold drawing line SMEI , Input wire max.10mm, Speed - 4m/sec. - But welding achine SMEI - Wire sharpener SMEI

Condition: like new (used), Year of construction: 2024, functionality: fully functional, input voltage: 400 V, warranty duration: 6 months, type of cooling: water, overall weight: 4,000 kg, working width: 1,000 mm, Schlatter NQD - Cross seam welding machine - Overhauled We offer here a completely overhauled Schlatter NQD cross seam welding machine. The delivery time of the machine is approx. 4 months. Welding heads: 4 pieces Hjdpfx Abeu Tqhhe Tjt Travel distance: 950mm Welding speed: up to 12 meters / minute The machine is only for sale as reconditioned / as good as new. With kind regards T. Becker

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, working range: 1,000 mm, For sale is a completely refurbished Schlatter radiator welding line consisting of: - Back-up ring unit (EBV) - 2-row multi-spot welding machine (hydraulic) - 2-row convector welding machine (pneumatic) - Longitudinal seam welding machine (NFR) - Cross-seam welding machine (NQD) - Cutting shear (TS10) - Corner cutting machine (ESV) - Transverse edge closing device (QRSV) - Transport & turning device (TVW) - Nipple & spacer welding system (NIAH) Hedpfx Aev Edlvsb Tet - Test basin (water) Control system: Siemens S7 TIA Please note that the radiator welding line is only available in a fully refurbished condition.

Year of construction: 2013, condition: excellent (used), From liquidation of business assets: Kjellberg TIG 321 AC/DC Year of manufacture: 2013 Pulsed operation HF ignition Water cooling Welding range: 5-320 Amps Hedpfxohp U Rme Ab Tst 320 Amps at 45% duty cycle Complete, with 4-meter torch, ground cable, and pressure regulator Dimensions in mm, approximately: 1100x510x810 --Very well-maintained unit--

Condition: used, MIG/MAG pulsed gas shielded welding machine FRONIUS, Type TransPulsSynergic - TPS 330 Art. No.: 4.075 Serial No.: Year of manufacture approx. 2000 Power: 330 amps = 50% duty cycle 300 amps = 60% duty cycle 210 amps = 100% duty cycle Adjustment range: stepless Open-circuit voltage: approx. 50 volts Open-circuit voltage: approx. 30 volts Hsdpfx Aoyxy Tbsb Tjt Mains connection: 400 volts, 50 Hz, 32 amps, plug - Digital display for voltage and current - Pulse function - Various welding programs can be selected Welding processes: MIG/MAG/TIG (program and manual operation) 2-cycle, 4-cycle, 4-cycle special and spot welding - Separate 4-roller wire feeder FRONIUS, Type VR 152, with connecting hose package approx. 1.5 meters - 4 meter hose package NEW, with central connection FRONIUS - External FRONIUS water cooling unit, Type FK 71 - Welding gas pressure regulator NEW - Welding machine equipped with 1.2 mm welding wire Space requirement L x W x H: 900 x 660 x 1550 mm Weight: approx. 160 kg Good condition - fully functional - ready for demonstration The unit is also suitable for TIG and electrode welding. Additional equipment for TIG and electrode welding is not included in the scope of supply.

Condition: refurbished (used), type of cooling: water, welding current (min.): 25 A, welding current (max.): 450 A, Second-hand Röwac PU450 Double Pulse MIG Refurbished, tested, serviced and ready for immediate use 3 Months Warranty Specifications: 25-450 AMP 400 Volt Pulse / Double Pulse Synergic Water-cooled 2/4 Step 4 Roller drive Gas pre flow / Gas post flow Start current / End current Fixed programs / Program memory Elektrode option Including: 4 Meter Welding torch, earth cable with clamp, and gas cable. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. Hedpfx Aezv I Nvsb Tot The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: good (used), Jig boring/Milling machine HAUSER 3DR Travel X: 400 mm Travel Y: 200 mm Travel Z: 400 mm Spindle: 2 speeds Cone:CM2 Spindle exit: 120 mm 2 speed ranges 60-1500 RPM / 1500-3000 RPM Table size: L 590 mm x W 320 mm Hodpezw A A Tjfx Ab Tjt Speed variator at the spindle 2 advances Auto descent: 0,03 mm/min - 0,06 mm/min X-axis functional with Mitutoyo devise Y and Z axis: defective scale Voltage: 380 V Width: 1500 mm Depth: 1700 mm Height in low position: 1800 mm Weight: approx 1,5 T

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 15 h, functionality: fully functional, machine/vehicle number: LZ202508173W, type of input current: AC, total height: 1,600 mm, total width: 600 mm, total length: 1,300 mm, input voltage: 220 V, overall weight: 205 kg, warranty duration: 12 months, type of cooling: water, sheet thickness aluminum (max.): 5 mm, product height (max.): 6 mm, space requirement height: 1,800 mm, space requirement width: 1,600 mm, space requirement length: 2,300 mm, input current: 32 A, protection type (IP code): IP54, laser power: 1,500 W, input frequency: 60 Hz, laser wavelength: 1,080 nm, wire diameter (max.): 1.8 mm, sheet thickness steel (max.): 5 mm, sheet thickness stainless steel (max.): 5 mm, Equipment: documentation/manual, type plate available, EX-DEMO TRADE SHOW 2026 UNIT WITH 40% DISCOUNT We are offering for sale, with an exceptional 40% discount on the list price, our LZ-WH 1500W fiber optic laser welding machine. This machine is in like-new condition: it has been used for only a few hours as a demonstration unit during industry trade shows throughout 2026. It is in perfect working order and ready for use. 4-IN-1 TECHNOLOGY: MAXIMUM VERSATILITY A single, compact, mobile, and plug&play system, designed to perform: -Manual laser welding: Up to 4mm on carbon steel/stainless steel and 3mm on aluminum, with or without wire feed. -Laser cleaning: Rapid removal of rust, paints, oils, and oxides. -Laser cutting: Precision cutting of sheet metal with limited thickness. -Weld bead cleaning: Aesthetic finishing and passivation of the weld bead after processing. ADVANCED SAFETY AND COMPLIANCE WITH EUROPEAN DIRECTIVES The machine has been configured to meet the most stringent European industrial safety standards. It is equipped with: Dual-channel safety interlocks to ensure redundancy and maximum reliability of the laser emission locking systems. Dedicated safety interlock switch, designed to be directly connected to a control cabinet or a protective welding curtain. This ensures that the laser cannot be activated if the perimeter barriers are not secured. Contact interlock on the ground clamp and Category 0 emergency stop button. MAIN TECHNICAL DATA Laser Source Power: 1500W (continuous wave CW) Wavelength: 1064 - 1080 nm (internal Class 4) Power Supply: 220V Single-phase, 50/60Hz Total Power Consumption: ~7 kW Cooling: Integrated 16L water chiller for continuous and intensive operation cycles and fan. Wire Feeder: Automatic and integrated into the cart. Interface: Color touch-screen with pre-set parameter library. Hedpezw Uf Tofx Ab Tet Overall Dimensions (LxWxH): 1300 x 600 x 1600 mm Weight: 205 kg Protection Rating: IP54 INCLUDED EQUIPMENT The system is supplied complete with everything needed for production: machine body with chiller, manual laser torch with cable harness, wire feeder, ground clamp, and a comprehensive kit of consumables (replacement protective lenses and a set of copper nozzles for various functions). SALES TERMS AND LOGISTICS Condition: New machine (Ex-Demo trade show 2026). Price: 40% discount from the list price. Delivery: Ex Works (EXW) at our facility in Settimo Torinese. Shipping: Inspection and direct pick-up at our facility are possible. If transport is required, packaging and shipping costs will be calculated separately upon request from the buyer. Documentation: User and maintenance manual, and CE certification. Contact us to receive the complete technical data sheet or to view the machine in operation. OR REQUEST A QUOTE FOR A NEW MACHINE!

Condition: used, Plasma impulse gas metal arc welding machine, pulse machine EWM Type Tetrix 400 Plasma / Tetrix 400 DC-P Robot Plasma welding and soldering machine Art. No.: Serial No.: Year of manufacture 2003 Output: 400 amps = 40% duty cycle 360 amps = 60% duty cycle 300 amps = 100% duty cycle Setting range: stepless Open-circuit voltage: approx. 26 volts Mains connection: 400 volts, 50 Hz, 32 amps plug - Digital display for current - Digital display for voltage, job, and program - Various welding programs can be selected - Pulse mode - Separate 4-roller wire feeder EWM, Type DV cold wire hand with connecting hose package approx. 5 meters - Approx. 4 meter hose package - External EWM water cooling, Type Cool 71 U41 DKF - External high-voltage unit - Welding machine equipped with 1 mm welding wire Hedpfx Abszwb R Ns Tet Space required L x W x H: 1300 x 640 x 1830 mm Weight: 245 kg Very good condition

Condition: used, Serial number: 280935 Duty cycle: 100%/240A Hjdpfxozm Ib Hj Ab Tjt Online auction of metalworking and sheet metal processing machines (including a wide selection of SIEGMUND welding and clamping tables and related tools, SAFAN press brakes and SAFAN guillotine shears, MOSMAN YLS-3000 3kW laser welding machine, various FRONIUS, REHM, etc. welding machines, BOMAR, URSUS, ELHA, etc.), remaining stock of sheet metal, materials and inventory, rolling stock, technical equipment, and modern office furniture, released following the recent bankruptcy of Solex Thermal Science (Netherlands) B.V., formerly Mosman Stainless Steel in Haaksbergen, the Netherlands. The online auction opens Thursday 16 July and closes Thursday 3 September. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 1 September Pickup days are on: - Thursday 10 September - Friday 11 September Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: used, Year of construction: 1981, functionality: unexamined, Due to the dissolution of the department, an AGIE EMS 3 die-sinking EDM machine is available. The machine was still in operation until 12 months ago, but is no longer needed and is now stored disassembled. It is sold complete, including tank, filtration unit, 2 barrels with original fluid, as well as various tools and copper electrodes. Suitable for hobbyists or professionals—also a good source of spare parts, as these parts are becoming increasingly scarce. Loading with forklift is free of charge, whether you want the complete unit or just specific parts. Collection is preferred, but shipping with a freight carrier is also possible. Price upon request. Hjdpfx Abextq Nao Tjt

Condition: used, Year of construction: 2017, functionality: unexamined, R+P Stud Welding Cell Enclosed protective cell made of aluminum profiles Safety enclosure with protective doors Signal light Integrated control cabinet Documentation available Suitable for automated stud welding processes Nelson Stud Welding Machine Manufacturer: Nelson Stud Welding Type: SD-FSE 1000S Year of manufacture: 2017 Serial number: 1739289 Part No.: 80-07-57 Technical data: Supply voltage: 24 V DC / 90 V DC Input current: 1 A / 10 A Welding current: up to 2000 A (duty cycle 2%) Protection class: IP20 Polarity: STD Scope of delivery: Welding gun Connection cable Mobile equipment cabinet Hsdpfx Abozvylpe Tst Both units were last used together as an automatic stud welding system.

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, feed rate X-axis: 1 m/min, total height: 1,750 mm, total length: 1,400 mm, total width: 1,250 mm, quill diameter: 60 mm, space requirement width: 1,500 mm, space requirement length: 1,500 mm, space requirement height: 1,800 mm, distance table center to spindle nose: 590 mm, spindle stroke: 130 mm, workpiece weight (max.): 400 kg, Equipment: rotational speed infinitely variable, Important note! Payment for the machine, as is common with used machines, is made in full before loading, no partial payments or installments! HENRI HAUSER OP3 High-precision drilling machine / Made in Bienne/Biel, Switzerland Excellent condition! Coordinate drilling machine / gauge drilling machine with tool set (see photos) in very well-maintained, exceptional condition, second owner (41 years in the last possession). This quality will never be produced again! The coordinate drilling machine has the rare option of motorized table drive in the X and Y axes and potentiometers. This eliminates the need for tedious manual adjustment of individual coordinates over long distances using hand cranks. Furthermore, it has rare thermal stabilization and expansion compensation. Two heaters are provided for this purpose, which can and must be switched on separately before starting work to maintain high accuracy and dimensional accuracy. This explains the factory-high positioning accuracy of 0.002 mm with a resolution of 0.001 mm. What is unique is that the Hauser has two Heidenhain digital displays with a total of 4 glass scales with 1My resolution, also for the quill feed. This is a major advantage for precise drilling and milling at depth with Wohlhaupter, spindle tools, etc. With the mentioned options and in this first-class condition, it is very rare and highly unlikely to be available again. Those familiar with these machines, which are mainly used in the watch industry, case making / defense industry, precision engineering, material testing and the optical industry, know the value of these masterpieces of mechanical engineering. Also ideally suited for engine construction / overhaul, technical universities and training, materials technology, special machine construction, etc. All documents, manuals, electrical diagrams, etc. are of course available in the original! Technical data: Table length 550 mm, table width = 320 mm, longitudinal travel X-axis = 400 mm, transverse travel Y-axis = 250 mm, Vertical travel Z-axis = 400 mm Max. workpiece weight on the table = 400 kg, spindle connection MK 2, stroke of the drilling spindle (Z-axis) = 130 mm Distance table to spindle = 590 mm, spindle speeds steplessly from 60 rpm to 3000 rpm Feeds: Drilling spindle slide: 2 steps from 0.03 mm/rev to 0.06 mm/rev Connection 50 Hz 3x 380 Volt, spindle motor 0.80 HP Hsdpezuvwlsfx Ab Tjt Machine dimensions: Length = 1400 mm, Width = 1250 mm, Height = 1750 mm Machine weight approx. 1500 kg. Shipping (direct transport without transshipment) within the EU is possible. Price net export within EU. Example: Secure shipping by direct transport (without transshipment!) to France/Spain/Italy, etc. up to 1700 km driving distance approx. 1100 - 1450,- EUR.

Condition: used, Colour: Green Empty weight: 6.000 kg Hedpfowfpbbex Ab Tst - Documentation available: No - CE certificate present: No - Drive system: Conventional - Number of axes [pcs.]: 3 - Table length [mm]: 2200 - Table width [mm: 1500 - X-axis travel [mm]: 2500 - Y-axis travel [mm]: 1400 - Z-axis travel [mm]: 1000 - Spindle diameter [mm]: 100 - Options: Digital readout - Transport weight [kg]: 6000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, MIG MAG welding machine, gas-shielded welding system, MESSER LINCOLN, type MagStar 18 Serial No. 4210048, Year of manufacture approx. 1995 Output: 180 amps = 60% duty cycle 140 amps = 100% duty cycle Hsdpjzugn Isfx Ab Tjt Setting range: 8 power levels Mains connection: 400 volts, 50 Hz, 16 amp plug - Spot welding attachment - 2-roller wire feeder - 3 meter hose assembly with central connection - Welding gas pressure regulator Space required L x W x H: 1150 x 460 x 650 mm Weight: 100 kg In good condition

Condition: used, MIG MAG welding machine, gas-shielded welding unit CLOOS, type GLC 403 PA-TS Manufacturer's No. 8198, Year of manufacture 1994 Rated power 400 amps Power 400 amps - 60% duty cycle 310 amps - 100% duty cycle Adjustment range: stepless Connection hose package: 4.5 meters Mains connection: 380 volts, 50 Hz, 32 amp plug - 2-cycle and 4-cycle welding unit - External wire feeder, type CK 72/5TSZK with 2-roller drive and 4.5-meter hose package Hjdpezugnzefx Ab Tet - 4-meter hose package with central connection and EHRIG hand torch, type Senator-800-D - Water-cooled - Pressure gauge for gas cylinder - Welding unit equipped with 1 mm welding wire Space requirement L x W x H: 1250 x 600 x 1100 mm Weight: 300 kg Good condition

Year of construction: 2008, condition: ready for operation (used), Stroke: 100mm, max. electrode distance: 230mm, electrode distance: 20kN, controls: Siemens S7-1500, with documentation, was hardly used. Hodpfx Abjlp N Eyo Tet

Condition: defective spare-parts repository (used), Year of construction: 1999, X - Axis 400 mm Hedpfx Abexlnm Te Tst Y - Axis 300 mm Z - Axis 300 mm Clamping area 600 x 400 mm Max. electrode weight 100 kg Electrode changer 20 positions