Used Schmersal Psc1-C-100-Fb1-Pnps 103011996 for sale (67,571)

Condition: new, Manufacturer: Schmersal Product series: PROTECT PSC1 Type: PSC1-C-100-FB1-PNPS Article number: 103011996 Device type: Programmable safety controller Supply voltage: 24 V DC Safety level: PL e Safety level: SIL 3 Safe inputs: 14 Safe semiconductor outputs: 4 Signal outputs: 6 Safety relay outputs: 2 Communication protocols: EtherCAT, Ethernet/IP, PROFINET IO, PROFIsafe Mounting type: DIN rail Dimensions: 112.5 × 100 × 115 mm Weight: 630 g Available quantity: 6 pieces Ijdpfx Anozcguxjwsau

Condition: new, Schmersal MZM 100 ST2-SD2PREM-A solenoid interlock,unused in opened original packaging, 100% functional, scope of delivery according to photos Ijdjpnpntjpfx Anwjau

Condition: excellent (used), Year of construction: 1979, functionality: fully functional, Description 100 TON C FRAME PRESS WITH BOTTOM FORCE BACK UP 40 TON Machine is great working condition, was overhauled cilinder, sealings. AWAILIBLE 3 MACHINES BOTTOM FORCE 40 TON Specifications Manufacturer MULLER 100T Model CEZ 100 Year 1979 Condition Used Press force 100 TON Iodpevldxiofx Anwsau Travel up doen 0-560mm Travel bottom up 0-200mm Power 15Kw

Year of construction: 1970, condition: ready for operation (used), A horizontal boring and milling machine Scharmann is available. Spindle sleeve diameter: 120mm, travel X/Y/W: 1600mm/1600mm/600mm, speed: 1000rpm, table dimensions X/Y/Z: approx. 1200mm/1400mm, max. table load: 6000kg, column diameter: 220mm, table rotation: 360°, rapid traverse: 380mm/min, feed: 2400mm/min. Machine dimensions X/Y/Z: approx. 4500mm/2600mm/3000mm, weight: approx. 17000kg. Dokumentation vorhanden. An on-site inspection is possible. Ijdjxyk Tlepfx Anwsau

Condition: used, machine/vehicle number: 008108, Max width workable: 1050 mm Iajdpsw Idduefx Anweu Max length workable: 2400 mm Max height workable: 250 mm

Condition: excellent (used), We offer a climate test chamber for sale. Air-cooled Test chamber nominal volume: 280 liters Dimensions: External dimensions of the test chamber: 1500 x 2040 x 1075 mm With fan motor and door removed: 1500 x 1940 x 925 mm Test chamber: 720 x 690 x 560 mm Door, clear opening: 720 x 690 mm Viewing window, heated: 500 x 600 mm Temperature range: +5 to +100 °C Heating rate: 4.0 K/min Cooling rate: 0.6 K/min Climate range: +10 to +95 °C Humidity range: 10 to 95 % RH Humidity change rate: ≤ ± 3.0 Water connection for humidifier: Tap water or distilled water, 20-liter reservoir Power connection: 400 V 3/N/PE, AC, 50 Hz Maximum power consumption: 6.3 kW Weight: 500 kg Type: 3416/16 Refrigerant: R134a For your peace of mind as a buyer, please note the following: The following steps are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated instruments. Ijdpfjzd R T Tjx Anweau Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: excellent (used), Here we offer you a chamber dryer. External dimensions approx.: Width: 1,885 mm Depth: 1,200 mm Height: 2,425 mm Internal dimensions approx.: Width: 1,030 mm Depth: 1,000 mm Height: 2,100 mm Internal volume: 2.2 m³ Rated temperature: 100 °C Operating temperature: 85 °C Heating medium: 3 x 400 V, 50 Hz Heating power: 20 kW Air circulation rate: 4,500 m³/h / 400 Pa Motor power: 1.1 kW Protection class: IP 54 The chamber heating oven must not be used for flammable or explosive materials. The chamber heating oven must not be installed in an explosion-proof area. Continuous chain conveying system External dimensions: Height: 1,880 mm Width: 809 mm Depth: 950 mm Carrier bars: 13 pieces Pitch: 228 mm Carrier bar width: 354 mm Carrier bar depth: 320 mm Usable height: 135 mm Drive motor power: 0.25 kW at 189 Nm Transport speed: average 5 m/min. Load capacity/carrier bar: max. 10 kg Total load capacity: max. 130 kg Total weight when loaded: max. 730 kg Year of manufacture: 2005 Type: Ke/SO Condition: used Iaedpfezdzixex Anweu Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are reserved!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), IPG Ytterbium Fiber Laser with Controller Here we offer an IPG Ytterbium Fiber Laser with controller. IPG Ytterbium Fiber Laser Type: YLP-C-1-100-20-20 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are subject to change!) Iajdpjzdyyvsfx Anwou We would be happy to answer any further questions you may have over the phone.

Condition: excellent (used), CTS Temperature Shock Test Chamber TSS-70/350-A Device Data Manufacturer: CTS GmbH Type: TSS-70/350-A Year of Manufacture: 10/2017 Design: Temperature Shock Test Chamber Refrigeration Unit: Water-cooled Description Used temperature shock test chamber from CTS. Suitable for shock and cycle temperature tests. Application in industry, research, and quality assurance. Application Areas Material testing Aging tests Electronics and component tests Temperature shock tests Automotive and quality control Temperature Ranges Hot chamber: +50 °C to +220 °C Cold chamber: -70 °C to +100 °C Electrical Data 400 V / 3/N / 50 Hz Power: 19.8 kW Current: 46.5 A Connection: CEE 63A Refrigeration System Pre-cooling: R452A, 7.2 kg Cooling stage: R23, 2.8 kg CO₂ equivalent: 15.41 t / 41.59 t Water-cooled Pressure / Protection PS: 25 bar PT: 27.5 bar IP 54 Equipment Touchscreen control Microprocessor control Program operation Setpoint/actual value display (digital) 2-zone system Mobile frame for quick changeover Viewing window Integrated control cabinet Cooling water connections Technical Design Separate hot and cold chambers Iedpfsy H Hk Asx Anweau Stainless steel test chamber Industrial design Dimensions Dimensions: External dimensions (H x W x D): approx. 2450 x 2160 x 2200 mm Internal dimensions (H x W x D): approx. 610 x 850 x 680 mm Weight: approx. 2500 kg Documentation Declaration of Conformity Test certificates Operating manual Wiring diagram and piping diagram Spare parts list Service before delivery (optional) Functional test Refrigerant service Leak test Test run with protocol Condition Used. Optical condition, see pictures. Scope of Delivery Test chamber TSS-70/350-A Documentation (if available) Inspection possible by arrangement. Loading and transport can be arranged on request. Subject to change and prior sale. If you have any questions, please do not hesitate to contact us.

Condition: ready for operation (used), Gero F 100-200/12SO high temperature furnace 201101895 - 30 - 3000°C / Cable length green: 3.9 m, connection cable: 3.00 m, used, good condition, 100% functional, scope of delivery as per photos Isdox Erpnopfx Anwjau

Condition: new, AEG Modicon AM-C 916-100 CPU card S/N 0007107, unused, 100% functional Iasdpfx Anoi D Tu Asweu

Condition: new, RHTC 100 TON M/H-M/C-2 Hydraulic Press Model 100 TON M/H-M/C-2 Ijdpfx Anjxwk E Ajwsau Year 2025 Condition New Stock Number 2796 Working Width 1000 mm Stroke 380 mm Max Capacity 100ton

Condition: new, Year of construction: 2022, pressing force: 100 t, Estimated Equipment Weight 3500 Kg Equipment Dimensions (front x depth x height) (Ca. Aussenmasse) 1354 x 2005 x 2595 mm Table Dimensions (Useful Area) front x depth (Tischgroesse) Ø1050 mm Opening between table and hammer (Daylight) 350 mm Hammer stroke (Stoessel-Verfahrweg) 300 mm Drive power (Leistung in KW) 14,24 Kw Motor Rotation 1500,00 RPM Pump Flow 44,50 LPM Pump Motor Ratio 27,59 cm³/Rot Working Force (Zylinderleistung) 100,00 Ton Return Force (Rückzugskraft) 10 Ton Forward Speed 250 mm/s Working Speed with Pressure (Arbeitsgeschwindigkeit) 3~15 mm/s Iaedpfxshmi T Uj Anwsu Return speed (Hebegeschwindigkeit) 150 mm/s Working Pressure (Maximaler Arbeitsdruck) 210,00 Bar Cylinder quantity 2 pc Stem Diameter 41,76 mm Cylinder Diameter 250,97 mm Cylinder stroke (Stoessel-Verfahrweg) 300,00 mm Reservoir Capacity (Volumen des Oeltanks) 350,00 Liters Extractor Cylinder 5,00 T Cylinder travel (Stoessel-Verfahrweg) 150,00 mm

Condition: good (used), Year of construction: 1994, Ref. no.: 17540 Manufacturer: ARBURG Type: 270 C 500-100 RUNHOUR Only 100 Year of construction: 1994 Clamping unit Clamping force: 50 ton Opening stroke: 350 mm Distance between tie bars: 270 X 270 mm Mould height min.: 200 mm Platen size (h x v): 405 X405 mm Injection unit Screw diameter: 25 mm Injection volume: 67 cm³ Shot weight: 61 g Injection pressure: 2500 bar Measurements and weight Dimensions: 3,3 X 1,5 X 2,0 m Machine weight: 2400 kg Further information: Laboratory Machine with Exceptionally Low Operating Hours The offered ARBURG 270 C 500-100 was manufactured in 1994 and originates from the training and laboratory department of a university. The machine was not used in regular production and was mainly operated for educational and testing purposes. Iaodpfjyiz U Tjx Anwsu The control system shows only approximately 100 operating hours and just 867 machine cycles. The machine is equipped with a hydraulic drive system and the proven ARBURG Dialogica control unit. In addition, it features an integrated crane system to facilitate mould and component changes. The scope of supply also includes an unused spare screw with a diameter of 15 mm and a complete additional plasticizing unit, providing extra flexibility for different applications. Due to its exceptionally low usage, documented history, and valuable additional equipment, this machine represents a rare opportunity on the used machinery market.

Condition: excellent (used), Year of construction: 2004, operating hours: 76,085 h, functionality: fully functional, machine/vehicle number: 196531, clamping force: 500 kN, screw diameter: 25 mm, clearance between the columns: 320 mm, displacement volume: 49 cm³, injection pressure: 2,240 bar, injection weight: 45 g, mold height (min.): 200 mm, ejector stroke: 125 mm, opening stroke: 350 mm, overall weight: 2,300 kg, heating capacity: 4.9 kW (6.66 HP), pump power: 15 W, power: 19.9 kW (27.06 HP), Year of manufacture: 2004 Clamping force: 50 tons Distance between columns: 320 x 320 mm Screw diameter: 25 mm Injection volume: 49 cc Injection weight: 45 g for PS Equipment: 2 x core pull, handling interface, interfaces for hot runner systems Fully inspected! Iaedpfxjx Rq Rns Anweu PRICE REDUCED FROM 7,000 TO 6,000 EUR!!!

Condition: good (used), Feutron Temperature Test Chamber: -40 to +100°C Thanks to its robust construction, the Feutron TPK 3403/125 is a workhorse for standardized temperature testing. The primary areas of application for this model are: 1. Electronics and Component Testing This is the most common area of ​​application. It focuses on how components react to extreme temperatures: Functional Testing: Does the circuit board continue to operate flawlessly even at -40°C or +150°C? Burn-In Testing: Artificial aging of components through continuous operation at high temperatures to induce early-stage failures. 2. Materials Testing Investigation of physical changes in materials: Brittleness: Do plastics or rubber seals become brittle in cold conditions? Deformation: Do composite materials warp when exposed to heat? Storage Testing: How stably do chemical substances or adhesives behave over extended periods at a constant temperature? 3. Quality Assurance (QA) Sample Testing: In-process testing conducted alongside production to ensure that manufacturing output adheres to specified temperature ranges. Standards Compliance Testing: Conducting tests in accordance with common industry standards (e.g., DIN EN 60068) that prescribe specific temperature profiles. 4. Research & Development Prototyping: Testing new housing designs or materials under controlled thermal conditions prior to mass production. Manufacturer: Feutron Model: TPK 3403/125 Temperature Range: -40 to +100°C Refrigeration System: Air-cooled condenser Temperature Stability: approx. ±0.1 to ±0.5 K Usable Chamber Volume: approx. 125 liters Refrigerant: R22 Operating Pressure: 23 bar Power Supply: 220/280V-3-50Hz Input Fuse Rating: 25 A Protection Class: IP 20 Weight: 480 kg "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de Ijdpfx Asy Nynaonwoau You can find additional items—both new and used—in our shop! International shipping costs available upon request!

Condition: excellent (used), CTS Type: TSS-70/350-A Water-cooled cooling unit For sale is a high-quality temperature shock testing chamber from CTS (Clima Temperatur Systeme), model TSS-70/350-A. The unit is used for carrying out temperature shock tests and is typically used in industry, research, and quality assurance. Application areas: Material testing Aging tests Electronics and component testing Temperature shock and cyclic temperature tests Technical data: Type: TSS-70/350-A Temperature range: Hot chamber: +50°C to +200°C Cold chamber: -70°C to +100°C Electrical data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 20.4 kW Rated current: approx. 36.5 A Refrigeration system: Refrigerant: R404A / R23 Pre-cooling stage: approx. 6.0 kg Cooling stage: approx. 3.0 kg Water-cooled Equipment / Features: CTS control panel with touch display Microprocessor-controlled control and monitoring system Program operation Digital setpoint and actual value display 2-zone system (hot and cold chamber) Automatic moving platform for shock tests Technical design: Hot and cold chambers are separate Moving platform system for rapid temperature changes Test chamber made of stainless steel Insert shelf / grating Viewing window in the door Ijdpfx Aoy Hkgbsnwsau Water cooling connections available Control cabinet integrated Dimensions: External dimensions (H x W x D): approx. 2450 x 2160 x 2200 mm Internal dimensions (H x W x D): approx. 610 x 850 x 680 mm Weight: approx. 2500 kg Additional data: Protection class: IP 54 Operating overpressure: approx. 25 bar Test pressure: approx. 27.5 bar For your security as a buyer, the following information is provided! The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of supply: see pictures (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Application Areas: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical Specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient temperature to +180°C Cooling rate: approx. 4 K/min from ambient temperature to -60°C Iajdpfjy Hkd Hex Anwju Temperature deviation: - ±1 K over time - ±2 K spatially Temperature change rate: - max. 100 K/min average for shock test mode (no radiant heat) Transfer time between chambers: - ≤ 15 min for -65°C to +200°C with 10 kg ICs Changeover time: - < 10 seconds Electrical Specifications: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 17.2 kW Nominal current: approx. 29 A Site fuse: 32 A slow-blow Connection: Cekon 32 Refrigeration System: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features/Equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external device control - Fault notification via volt-free contact (Loadable up to 30 V DC, 2 A) - EMC tested Technical Construction: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber/transfer basket made of stainless steel (material no. 1.4301) - Stainless steel wire insert basket - Tube port NW 50 with sealing plug - Compressed air connection 1/4" male - Non-pressurized condensate drain R 1/2" female thread - Safety door locking - Lockable door with window Dimensions (according to installation diagram): External dimensions approx.: 2335 x 940 x 1820 mm Installation clearance approx.: 1990 x 940 x 1652 mm Test chamber internal dimensions: height approx. 410 mm, width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Additional Data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh Important information for your safety as a buyer! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: see photos (Specifications subject to change and errors excepted.) For further questions, please feel free to contact us by phone.

Condition: excellent (used), I'm selling a Heraeus T 5042 EK search engine Iasdpfxou Udp Ie Anweu

Condition: new, Year of construction: 2026, power: 15 kW (20.39 HP), pressing force: 100 t, stroke length: 600 mm, table width: 650 mm, table length: 850 mm, throat depth: 300 mm, Equipment: CE marking, documentation/manual, safety light barrier, 100 Ton C-Frame Hydraulic Press – CHCP 100 – New / 24-Month Warranty Hydraulic presses are industrial machines that provide high force and precision for metal forming, deep drawing, cutting, and assembly operations. The CRONOSSTECH CHCP 100 C-Frame Hydraulic Press is engineered for heavy-duty manufacturing applications, featuring high tonnage capacity, a robust steel frame, and precision operation. Key Advantages - Rigid, vibration-free steel frame construction - High precision (≤120 micron/meter) - PLC-controlled, user-friendly system - PARKER / REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components - Long service life with low maintenance cost Applications - Metal forming - Deep drawing and stamping - Cutting and punching operations - Assembly and pressing applications - Automotive and supplier industry Standard Features - Steel frame stress relieved by vibration technique - PLC control and touchscreen panel - Argon welding applications - EN ISO 15614-1 / 2017 certified welding (WPQR & WPS approved) - Parallelism and perpendicularity tolerances in accordance with ISO & DIN standards (≤120 micron/meter) - PARKER or REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical equipment - Automatic central lubrication system - Two-hand safety control system - Cooling system Technical Specifications – CHCP 100 Press Capacity: 100 Tons Stroke: 600 mm Throat Depth: 300 mm Table – Ram Distance: 700 mm Table Size: 650 x 850 mm Press Depth: 1300 mm Iajdpfxoyzb Dys Anwju Press Width: 650 mm Table Height from Floor: 900 mm Total Height: 2700 mm Main Cylinder Diameter: Ø220 mm Motor Power: 15 kW Weight: 8,500 kg General Information Country of Manufacture: Turkey Warranty: 24 Months Condition: New and unused This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, power: 7.5 kW (10.20 HP), pressing force: 100 t, table width: 670 mm, table length: 950 mm, punching force: 100 t, drop-through hole in table: 180 mm, ram bore: 45 mm, stroke adjustment: 120 mm, warranty duration: 24 months, Equipment: safety light barrier, An eccentric press is a type of mechanical press powered by an eccentric mechanism, designed for cold forming operations such as punching, cutting, and die forming. Thanks to its high production speed and repeatability, it provides an efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type Eccentric Press 100 Ton is engineered for stable operation in cold forming applications. Its rigid steel construction, pneumatic clutch-brake system, and CE-compliant safety infrastructure deliver dependable performance suitable for serial production. Key Advantages - Stable stroke performance and high repeatability in mass production - Operator safety-focused design (light barrier + safety systems) - Low maintenance requirement with centralized automatic lubrication - Production-ready operation with PLC control + dual-hand/foot pedal control Application Areas - Cold cutting and punching operations - Cold forging applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel construction frame • 4-sided slide guiding • Spheroidal cast iron connecting rod and gear housings • Crankshaft and transmission shafts made of 4140 tempered steel • Centralized fully automatic grease lubrication • Pneumatic clutch and brake combination • CE safety compliant • Dual-coil safety valve • Manually adjustable stroke • Light barrier hand and finger safety protection system • PLC control system • Dual-hand/foot pedal control system • Mechanical safety system • Emergency reverse motor operation • Compliant with occupational safety regulations • CE standards compliant ✅ OPTIONAL FEATURES Iasdpfx Asvtx Inonweu • Anti-vibration pads • Touchscreen LCD panel (standard for 150–300 ton) • Hydraulic safety system (standard for 200–300 ton) • Spare table • Uncoiler, feeder, and straightener • One set of custom die as requested • 8-sided slide guiding ✅ TECHNICAL SPECIFICATIONS (100 TON) Capacity: 100 Ton Throat depth: 300 mm Bolster–ram distance: 400 mm Slide–table distance: 465 mm Distance between side frames: 420 mm Ram adjustment (stroke setting): 85 mm Approx. press width: 1400 mm Approx. press depth: 1900 mm Approx. press height: 2450 mm Front anchoring dimension: 710 mm Side anchoring dimension: 1135 mm Bolster hole diameter: Ø200 mm Bolster size: 600×780 mm Die mounting slot diameter: Ø50 mm Ram size: 405×240 mm Table height from floor: 775 mm Stroke adjustment: 10–110 mm Strokes per minute: 50 spm Motor power: 11 kW Motor speed: 1450 rpm Approximate weight: 4650 kg Note: Please inform us if you require changes to the technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are handled directly by CRONOSSTECH.

Condition: good (used), Year of construction: 1972, functionality: fully functional, This processing plant is designed for the production of creams, ointments, gels, pastes, lotions, suppository compounds, etc., with a usable volume of 100 liters. The total volume with the container closed is 123 liters; the minimum fill volume is 35 liters. The system consists of a fully enclosed stainless steel container with double jacket, which can be electrically or water heated/cooled. The container features a lid with integrated mixing units and drives. The mixing vessel is mounted on three castors and can be wheeled out for filling or cleaning purposes. The lid is mounted on a lifting column for hydraulic raising and lowering, enabling convenient cleaning and emptying. It is fitted with an observation window and two inlets with valves, which can also be used for adding other product components. Additionally, an adjustable mechanism is provided for setting the grinding gap of the colloid mill. Technical specifications: Container: Permissible operating pressure: 1 bar / -1 bar Iodpfxsyx Sxcj Anwjau Homogenizer: 1,500/3,000 rpm – 1.8/2.5 kW Anchor agitator: 19/38 rpm – 1.8/2.3 kW Spiral agitator: 29/58 rpm

Condition: good (used), Year of construction: 2007, functionality: fully functional, clamping force: 800 kN, For sale is an Arburg injection moulding machine, model 370 C 800-100. Technical Data: Year of manufacture: 2007 Injection unit unfortunately not included Clamping force: 800 kN Clearance between tie bars: 370 x 370 mm Max. platen distance: 750 mm Mould installation height: 250 mm Injection unit: 100 Transport and loading can be organised throughout Europe at an additional cost upon request. Prices are subject to VAT. Inspection by appointment possible. Please contact us, our team will be happy to assist you. Trade-in or exchange possible! Iasdsyxqiyspfx Anwju Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For further information or contact options, please visit our website.

Condition: excellent (used), CTS CW‑60/5.5 – Water-Cooled Climate Test Chamber The CW‑60/5.5 from CTS GmbH (Climatic Test Systems) is a mid-sized, walk-in or drive-in climate chamber designed for conducting temperature and humidity tests on multiple test specimens simultaneously. Equipment Description This climate test chamber allows you to assess the function or material properties of test objects under controlled temperature and humidity conditions. Efficient air circulation with a high re-circulation rate ensures excellent transfer to the test goods. The air handling system is located at the rear of the inner chamber. All of the aggregates are mounted in a separate frame behind the unit, providing easy access. The control system is housed in a separate switch cabinet, while the user interface is integrated into the cabinet door. To dehumidify the test chamber, it is equipped with a self-regenerating compressed air dryer. Fresh air can be supplied by a blower to purge the chamber as required. Technical Specifications: Temperature Testing: - Temperature range: -60 °C to +100 °C Iasdpfjx Eabpsx Anweu - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate (linear with test specimen and radiant heat, measured at supply air): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity (dew point range +5°C to +89 °C) - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 to ±3 % r.h. over time Technical data based on ambient temperature of +25 °C, rated voltage 400 V, without test specimen, without radiant heat, and without additional equipment. Dimensions: Internal dimensions (test/useable space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height 2300 mm, Width 1600 mm, Depth 1550 mm External dimensions: - Height 2800 mm, Width 2250 mm, Depth 5000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (incl. 5 sockets) - Rated current: 86.0 A - Protection category: IP 54 Technical Design: - Refrigeration unit: water-cooled, low-noise, semi-hermetic, stepless power adjustment via electronic monitoring and control system - Environmentally friendly refrigerants: R 23 / R 404 A Notes: - Inspection possible by appointment (46325 Borken) - Shipping by freight forwarding possible – costs & organization on request - Scope of delivery: (see picture) - (Subject to modifications and errors in technical data, all information provided without guarantee!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), CTS CW-60/5.5 – Water-cooled Climate Test Chamber The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in and drive-in climatic chamber designed for simultaneous temperature and humidity testing on multiple test specimens. Device Description The climate test chamber allows for functionality or material property testing of a test item under the influence of temperature and humidity. Efficient air circulation with a correspondingly high level of recirculating air volume ensures excellent transfer to the test item. The air treatment compartment is located at the rear of the test chamber. The aggregates are positioned behind the unit in a separate frame for easy access. The control system is integrated into a separate control cabinet. The control panel is mounted in the door of the control cabinet. For dehumidification, the test chamber is equipped with a self-regenerating compressed air dryer. The test chamber can also be purged with fresh air via an internal blower. Technical Specifications: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate, linear with specimen and heat radiation, measured in supply air: - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% rH - Dew point range: +5 °C to +89 °C - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 – ±3% rH over time Technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test item, without external radiation and without additional devices. Dimensions: Internal dimensions (test space/usable volume): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: 2,300 mm, Width: 1,600 mm, Depth: 1,550 mm External dimensions: Height: 2,800 mm, Width: 2,250 mm, Depth: 5,000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Nominal power: 58.3 kW (incl. 5 sockets) - Nominal current: 86.0 A Iasdpfxjx Eaxbj Anwou - Protection rating: IP 54 Technical Execution: Refrigeration unit: Water-cooled, low noise, semi-hermetic, infinitely variable capacity adjustment via electronic monitoring and control system, environmentally friendly refrigerants R 23 / R 404 A Notes: Inspection by appointment possible (46325 Borken) Shipping by forwarding agent possible – Costs & organization upon request Scope of delivery: (see photo) (Subject to change and possible errors in the technical data; information provided without liability!) For further questions, we are happy to assist you via telephone.