Used Schmidt D 32/20 for sale (72,659)

Condition: used, Transformer, transformer, converter, three-phase autotransformer, three-phase transformer -Three phase transformer Nodpfsfitflsx Afdsdc -Type: D 32/20 50/60 Hz 6000 VA -Primary: 3x 400 V -Secondary I: 1x 110 V 6 A -Secondary II: 1x 230 V 6 A -Secondary III: 3x 18 V 10 A -Secondary IV: 3x 66 V 30 A -Dimensions: 420/175/H430 mm -Weight: 80 kg

Condition: used, mileage: 20,050 km, power: 55 kW (74.78 HP), first registration: 11/2021, fuel type: diesel, driver cabin: other, gearing type: other, Year of construction: 2021, operating hours: 2,532 h, number of seats: 2, Equipment: air conditioning, * Compact sweeper Swingo 200+ Basic - push-type 2-brush system * Hydro-pneumatic suspension * 4-wheel steering (4WS) switchable * 2 brushes D=850mm * Rotating beacon (non-folding) * Pressurized water system with dirty water pump * 2 work lights on the cabin roof and 1 LED work light for the suction nozzle * Air conditioning * Cruise control * Warning triangle, first aid kit, safety vest - according to EN 471 * Swingo transport speed 50 km/h - including additional disc brake system on the rear axle * Folding rotating beacon * Wheel chock with holder * Engine: VM R 754 ISE 5 - EuroMot 5 - 4-cylinder - 55 kW (75 hp) EuroMot5 homologation incl.: DOC + DPF (Diesel Oxidation Catalyst + Diesel Particulate Filter closed system) * 500-hour service interval (instead of standard 300 hours) with special ASH Long Life oil * Hydropneumatic comfort suspension on front and rear axles - front and rear axle suspension via hydraulic cylinders and nitrogen accumulators - high driving comfort and best driving safety. Note: System is not maintenance-free * Air-suspended driver's seat including headrest * 3-point safety belt for driver - mounted on the cabin rear wall - Option 174590 Headrest for driver's seat is required * 2-point belt (lap belt) for passenger * DAB+ radio, CD, MP3, USB connection and Bluetooth hands-free system * Rear area monitoring with monitor and camera * Camera for suction nozzle monitoring * Reversing warning signal can be switched off (night mode) * Steering wheel knob * 12V socket (cigarette lighter socket) in the cabin (max. 15 A) * Professional plate brush control for 2-brush system (independent control) * C-shaped brush arms for 2-brush system * Mixed brush bristles (steel / poly-plastic) * Coarse dirt flap rubber in the suction nozzle made of 17mm material instead of 10mm * Preparation for subsequent installation of the hand suction hose * Standard paint finish RAL 9016 white * LED rotating beacon (instead of the standard rotating beacon) * Manual central lubrication, all lubrication points combined on two blocks Other: * Trade-in and purchase of vehicles and machines possible. * Sale price excluding transport and delivery. * No liability for printing and typographical errors. * Errors, changes and prior sale reserved. * Offer is subject to change. * Photos may vary. Price applies to the existing condition. * All information without guarantee. Ndedpezcfytofx Afdjc

Year of construction: 1993, condition: ready for operation (used), Number of spooling positions: 2x 6, number of take-off pulley drives: 1 group drive, number of layings: 1 group laying, wire diameter: 0.15-0.3mm, bore diameter 22mm, winding speed: 20-120/min, max. winding strength: 78.5MPA, connected load: 4.5kW, material: stainless steel and brass, spool range: K160 to K250 acc. to DIN 46399, with group drive of take-off pulleys for all spooling positions and group laying for all spooling positions for conventional flanged spools. Ndsdpfxsn I T Tgj Afdec

Condition: used, operating hours: 7,529 h, mileage: 49,881 km, power: 55 kW (74.78 HP), first registration: 11/2015, overall weight: 3,500 kg, fuel type: diesel, color: white, axle configuration: 4x2, maximum load weight: 650 kg, empty load weight: 2,850 kg, next inspection (TÜV): 04/2026, wheelbase: 2,500 mm, brakes: other, driver cabin: day cab, gearing type: automatic, emission class: euro6, number of seats: 2, Equipment: air conditioning, cabin, immobilizer system, parking sensors, power assisted steering, * German vehicle * Original 49,881 km * 7,529 operating hours * Documentation available * Schmidt Swingo, multiple units available * Condition as shown in photos * All-wheel steering * High-pressure cleaner with high-pressure lance for pre-cleaning and removal of stubborn dirt * 2 front disc brushes * 800 mm diameter * Sweeping width: 2,800 mm * Ideal for footpaths, bicycle paths, and narrow alleys * Air conditioning * Pre-spraying system * Debris hopper 1.8 m3 * Fresh water tank 190 litres * Total capacity 380 litres * EasyDrive (hydrostatic drive system) (SN) * Hydropneumatic suspension with 4 nitrogen spheres * Remote-controlled container lid opening and tilting Ndjdex Uy Abopfx Afdoc * Diesel engine VM39D/2 * 55 kW * 50 km/h type approval * Driver's cab with air-suspended comfort seat * Camera for suction nozzle monitoring * Reversing camera * 2-seater * Rotating beacon(s) * Wheelbase 1,800 mm * GVW 3,500 kg * Payload 650 kg * Self-propelled working machine * For sales to businesses and for export (non-EU and within EU), German commercial law applies. If a new TÜV inspection is required, we are happy to provide a quote from our partner workshops. Our offer generally does NOT include new TÜV inspection, new DGUV, new SP, or new UVV. You can find more trucks on our website at We speak the following languages: German, English, Polish, Turkish Note: We strongly recommend and offer the opportunity to inspect and check the goods to avoid any misunderstandings regarding their condition and suitability. Inspections and checks are possible at any time by appointment and are expressly encouraged. All information is provided without guarantee. We do not accept liability for errors or incorrect details in the offer. The buyer is obliged to independently verify the condition and specifications of the goods/vehicles. Subject to changes, prior sale, and errors.

Condition: good (used), Year of construction: 2007, functionality: fully functional, Kolbe MWE-32 Meat Grinder Mixer In good used and working condition. New belt and motor. The machine runs on 400 volts, is made entirely of stainless steel, has a mixing paddle, is 98 cm Enterprise, has been tested in the workshop, and is ready for immediate use. FD 200 loading, built in 2009. Ndedpfx Ajwcgr Esfdoc The machine is built in 2007. Further information upon request. Cash or advance payment. Sale to businesses only. No guarantee. No warranty.

Condition: used, Year of construction: 2019, Schmidt Stump Grinder 2000 - including a new set of teeth MAS234080 Ndodpfo Afiglex Afdec Price applies to the current condition. Offer subject to change. Errors, modifications, and prior sale reserved. All information without guarantee.

Condition: used, operating hours: 7,526 h, mileage: 69,033 km, power: 55 kW (74.78 HP), first registration: 03/2016, overall weight: 3,500 kg, fuel type: diesel, color: white, axle configuration: 4x2, maximum load weight: 650 kg, empty load weight: 2,850 kg, wheelbase: 2,500 mm, brakes: other, driver cabin: day cab, gearing type: automatic, emission class: euro6, number of seats: 2, Equipment: air conditioning, cabin, immobilizer system, parking sensors, power assisted steering, German vehicle, original 69,038 km, 7,526 operating hours, Schmidt Swingo – multiple units available. Condition as per photos. All-wheel steering, high-pressure cleaner with high-pressure lance for pre-cleaning and removal of stubborn dirt, 2 front disc brushes, 800 mm diameter, sweeping width: 2,800 mm. Ideal for pedestrian and cycle paths or narrow lanes. Air conditioning, pre-spray system, debris hopper 1.8 m³, fresh water tank 190 liters, total volume 380 liters. Remote-controlled opening and tipping of hopper lid. Diesel engine VM39D/2, 55 kW, road approval for 50 km/h. Driver’s cab with air-suspended comfort seat, reversing camera, 2-seater, EasyDrive (hydrostatic drive) (SN), beacons, gross vehicle weight 3,500 kg, payload 650 kg, self-propelled work machine. For sales to tradespeople and for export (both EU and non-EU), German commercial trade regulations apply. If you need a new TÜV inspection, we are happy to provide a quote from our partner workshops. Nodpfexb Dghex Afdedc Our offer is generally WITHOUT new TÜV inspection, WITHOUT new DGUV, WITHOUT new SP, and WITHOUT new UVV. More trucks can be found on our website at We speak the following languages: German, English, Polish, Turkish. Note: We offer and highly recommend viewing and inspecting the goods to avoid any misconceptions regarding condition and suitability. Inspections can be arranged at any time by appointment and are expressly desired. All information provided without guarantee. We do not accept liability for errors or inaccurate statements in the offer. Buyers are responsible for independently verifying the condition and features of the goods/vehicles. Subject to change, prior sale, and errors.

Condition: used, operating hours: 8,891 h, mileage: 92,412 km, power: 62 kW (84.30 HP), first registration: 10/2012, overall weight: 4,500 kg, fuel type: diesel, color: white, axle configuration: 4x2, maximum load weight: 1,650 kg, empty load weight: 2,850 kg, wheelbase: 2,500 mm, brakes: other, driver cabin: day cab, gearing type: automatic, emission class: euro5, number of seats: 2, Equipment: ABS, air conditioning, cabin, power assisted steering, seat heater, soot filter, German vehicle, 1st owner, condition as shown in photos, Schmidt Swingo available in multiple units, only 8,891 sweeping hours, selectable four-wheel steering, two front disc brushes (800mm width), front pre-spraying system, sweeping width: 2,800 mm, ideal for footpaths, cycle paths, and narrow alleys, 1.8 m³ debris hopper, fresh water volume: 180 liters, total water volume: 360 liters, hopper lid opening and tipping via cable remote control, VM 56C/9 engine, output: 62 kW, air conditioning, reversing camera, radio, 2 seats, air-suspended driver’s seat, EasyDrive (hydrostatic drive) (SN), seat heating, warning beacons, gross vehicle weight: 4,500 kg, unladen weight: 2,850 kg, payload: 1,650 kg, self-propelled machine. Ndodpfxsvhqgle Afdec If a new technical inspection (TÜV) is required, we are happy to provide a quotation from one of our partner workshops. Our offer generally excludes new TÜV inspection, new DGUV, new SP, and new UVV. You can find more trucks and commercial vehicles on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We recommend and strongly encourage viewing and inspecting the goods to avoid any misunderstandings about their condition and suitability. Viewings and inspections are welcome by appointment at any time. All information is provided without guarantee. We accept no liability for errors or incorrect descriptions in the offer. Buyers are obliged to independently verify the condition and features of the goods/vehicles. Subject to change, prior sale, and errors.

Condition: used, operating hours: 4,607 h, mileage: 83,675 km, power: 62 kW (84.30 HP), first registration: 12/2011, overall weight: 3,500 kg, fuel type: diesel, color: white, axle configuration: 4x2, maximum load weight: 650 kg, empty load weight: 2,850 kg, wheelbase: 2,500 mm, brakes: other, driver cabin: day cab, gearing type: other, emission class: euro5, number of seats: 2, maximum speed: 50 km/h, Equipment: air conditioning, cabin, cruise control, onboard computer, parking sensors, power assisted steering, soot filter, * German vehicle * 1st hand * Condition, see photos * All-wheel steering switchable * EasyDrive hydrostatic drive * 2 front disc brushes 800 mm wide * Sweeping width: 2,700 mm * Pre-spraying device * Ideal for sidewalks, footpaths, cycle paths, narrow alleys, etc. * Sweeping hopper 1.8 m³ * 190 liter water tank * Open hopper lid and tilt the hopper via cable remote control * Motor: VM 05D/9 * Power: 62 KW * 50 km/h approval * Working speed: 12 km/h * Cruise control * Air conditioning * Rotating beacon * Reversing camera * Self-propelled work machine, therefore free travel in all environmental zones * GVW: 4,500 kg technically possible * GVW: 3,500 kg * Unladen weight: 2,850 kg * Payload: 650 kg If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. Nodpevhqw Refx Afdedc You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: used, operating hours: 4,808 h, mileage: 72,259 km, power: 55 kW (74.78 HP), first registration: 11/2015, overall weight: 4,500 kg, fuel type: diesel, color: white, axle configuration: 4x2, maximum load weight: 1,650 kg, empty load weight: 2,850 kg, wheelbase: 2,500 mm, brakes: other, driver cabin: day cab, gearing type: automatic, emission class: euro5, number of seats: 2, Equipment: ABS, air conditioning, cabin, parking sensors, power assisted steering, seat heater, soot filter, * German vehicle * Condition, see photos * Only 4,808 operating hours * EasyDrive (Hydrostatic drive) (SN) * Ideal for footpaths, bicycle paths, and narrow lanes * Schmidt Swingo, multiple units available * 2 rotating brushes at the front, 800mm width * Sweeping width: 2,800 mm * Extension device at the front * Total water volume 360 liters * Fresh water volume 180 liters * Opening and tilting the container via cable remote control * Air conditioning * Engine VM 56C/9 * Rear view camera * Heated seat * Radio * Air-suspended driver's seat * All-wheel steering can be engaged * 2 seats * Sweeping material container 1.8 m³ * Rotating beacon lights * GVWR 3,500 kg * Unladen weight 2,850 kg * Payload: 1,650 kg * Self-propelled working machine If a new TÜV (German technical inspection) is desired, we will gladly provide you with a quote from our partner workshops. Our offer generally does not include a new TÜV inspection, a new DGUV (German Social Accident Insurance) inspection, a new SP (safety inspection), or a new UVV (accident prevention regulation) inspection. You can find more trucks on our website at: We speak the following languages: German, English, Polish, Turkish Note: We strongly recommend and offer an inspection and examination of the goods so that the buyer does not have any false impressions about the condition and suitability. Inspections and examinations are possible at any time by appointment and are expressly desired. Njdjvhqmljpfx Afdsdc All information is without guarantee. We are not liable for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Changes, prior sale, and errors reserved.

Condition: like new (used), Niemann Butterfly VKDVB 332-20 Dissolver Vacuum version with Busch vacuum pump Power 15 kW with wall scraper Speed range 0-240 rpm, adjustable via frequency converter Ndedpfxowmaxmo Afdec Control cabinet 3 stainless steel mixing tanks, each 300 l Matching: Niemann/Gehalin H 500 squeezing device D = 700 mm for 300 l mixing tank Top condition, straight from production!

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Dowel and long-hole drilling machine GANNER JUNIOR 320 LBM Njdpfoz I Eggjx Afdedc in very good condition, like new, the machine comes from a small carpentry shop and was used very little there it can be used to mill long holes and drill dowel holes in 2 levels without reclamping 380V, 1500W Speed: 2800 rpm Year of construction: 1990 with this machine, you can mill long holes for, for example, lock housings and similar items, or create all types of frame dowel joints at right angles, flush, and mitered ideal for the production of dowel joints in timber frame construction, furniture, door, window, and stair construction, and for similar applications drilling on 2 levels, the grid and stops, and the design of the machine allow dowel joints to be produced in a very short time, which makes the machine very economical the machine requires a compressed air connection of 6 bar (air consumption is very low) Right-hand rotation mills and drills very well and cleanly with 2 angle stops (one center stop and one side stop, which can be used on both sides) 2 stop rails can be attached on the left and right, the stop rails are 1000 mm long, each with 2 folding stops the workpiece is clamped using 2 pneumatic clamping cylinders the height adjustment from one drilling level to the other is also pneumatic; the pneumatic switch for this is located at the front of the machine, which ensures fast adjustment of grids and drilling levels with a precision 12mm grid rail, which has a center grid and 12 grids on the left and right can be quickly converted for long-hole milling; the machine can then be used without a grid with 2 adjustable stops on the left and right, and then has a working width of max. 420mm the max. borehole height is 100mm the max. borehole depth is 150mm with stop and scale the max. workpiece height is 160mm everything works perfectly we will personally deliver and demonstrate the machine anywhere in Germany for 220.00 euros, so you have no risk when purchasing; delivery to Austria and the EU is also possible on request the machine table is 870mm wide, 140mm deep on the sides, and 350mm deep in the middle professional equipment, not cheap hardware store junk you can start working with the machine immediately with 2 chucks up to 20mm very stable and durable construction the precision guides with the backlash-free ball bearing bushings are in good condition and move smoothly

Condition: used, Year of construction: 1998, functionality: fully functional, cooling capacity: 3.3 kW (4.49 HP), input voltage: 400 V, input frequency: 50 Hz, Oil cooler – Flow-through oil cooler D20V D30V 2 flow-through oil coolers – cooling unit for machine cooling – individual sale possible. Two stand-alone flow-through oil coolers from Wöhr Kältetechnik for cooling/temperature control of the coolant circuit or hydraulic system on machine tools, with integrated circulation pump and flow monitor. Control cabinet integrated in the housing with connection cable, LAE temperature controller MTR11, and potential-free alarm contact in case of a malfunction. The integrated circulation pump is a gear pump. The cooling units are suitable for clean oil. Instructions for programming the temperature controller are available. Both coolers are in used condition. Cooling unit. Wöhr flow-through oil cooler, type D 20 V Year of manufacture 1998, serial no. 98101582, cooling capacity 2 kW, refrigerant R 404 a, with integrated circulation pump, operating voltage 400V, 50Hz, LAE controller MTR11, with Walter Procon connection plug (cooler was installed on the hydraulics of a grinding machine), dimensions approx. 80 x 75 x 110 cm, total power consumption 1.7 kW. Ndedog U H E Sopfx Afdsc Flow-through oil cooler D 30 V Wöhr flow-through oil cooler, type D 30 V, year of manufacture 1998, serial no. 98101583, cooling capacity 3.3 kW, refrigerant R 404 a, with integrated circulation pump, operating voltage 400V, 50Hz, LAE controller MTR11, with CEE connection plug (cooler was installed on the grinding oil supply of a grinding machine), dimensions approx. 80 x 75 x 110 cm, total power consumption 2 kW. The oil coolers and oil cooling system are in used condition and well maintained. Price negotiable. All technical specifications are subject to typing errors/changes. We only sell to countries within the European Community.

Year of construction: 2000, condition: ready for operation (used), A complete bottle rinsing system with Klinger bottle rinsing machine, Hager + Elsässer drinking water treatment system and Ro reverse osmosis system is available. 1) Bottle washer Klinger Euro Class-D 20/1/73, year of construction: 2000, capacity: 9600 bottles/h, cycle time: 7.5s, cycle time: 12.63min, bottles per row: 20, number of rows: 107, max. bottles in the machine: 2020, water consumption: 3.8m³/h, tank volume soft caustic/post-caustic: 5600l/740l. Dimensions X/Y/Z: approx. 8000mm/3400mm/2800mm, weight: approx. 16000kg, control system: Siemens S7. 2) Drinking water treatment plant Hager +Elsässer consisting of cation and anion exchanger, capacity: 5m³/h. Including salt tank, pre-filter and UV sonde. 3) RO reverse osmosis system, full desalination capacity: 2.5m³/h. Documentation available. On-site inspection is possible. Ndodpfx Afetwqzlsdsc

Condition: used, Battenfeld BEX-1-150-32-D-V / BEX 45-25E / 89-9436-3201 extruder machine. Manufacturer: Battenfeld-cincinnati Germany GmbH. Year of manufacture: 1999 Year of installation: 1999 Rated voltage: … V Maximum current consumption: … A Frequency: 50 Hz Required pressure: 6 bar Total weight: … kg Noise level: … dB Hydraulic pressure for the screen changer: Extrusion material output: 1000-1200 kg (filter-limited output: approx. 850 kg) Possible thickness: 1 – 5 mm Maximum width: approx. 1450-1480 mm Machine dimensions: as described in the layout. Battenfeld BEX-1-150-32-D-V / BEX 45-25E / 89-9436-3201 extruder machine Consisting of: Screw and barrel assembly, motor and drive system, control interface, and supporting auxiliary systems for feeding, thermal regulation, and downstream processing. Details: Feed station - 2x silos. 2 x metal separators - Degacan HE degassing elements, co-extruder Type BEX-1-150-32-D-V and BEX 45-25E / 89-9436-320 to produce sheets or coils. Nodpfx Aszump Esfdsdc Main extruder composed of 7 heating zones and one vacuum zone. Co-extruder composed of 3 heating/cooling zones to control the polymer. Followed by 3 calenders with temperature controllers. Extrusion die - To be confirmed if included. Calender line setup. Betacontrol Mk1 thickness measuring system. Radioactive source has been removed. Calvatron corona treatment system. Kalvar Calvtron automatic coil changing system. Rollers and calibration table. End-of-line sheet separation and side cutting (slitting) machine. BC touch control interface. Full workshop manuals.

Condition: used, Year of construction: 2021, mileage: 41,144 km, power: 62 kW (84.30 HP), first registration: 04/2021, overall weight: 4,500 kg, fuel type: diesel, color: white, axle configuration: 4x2, maximum load weight: 1,650 kg, empty load weight: 2,850 kg, wheelbase: 2,500 mm, brakes: other, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, differential lock, immobilizer system, onboard computer, parking sensors, power assisted steering, soot filter, * German vehicle * Original: only 41,144 km * Only 3,881 operating hours * Condition: see photos * Euro 6 * Schmidt Swingo, available in multiple units Nsdpjzi Srzefx Afdedc * All-wheel steering, switchable * Schmidt Swingo 3-brush system with freely movable front brush arm * 3rd disc brush in front, 800 mm wide, with front brush arm for left-right adjustment * Sweeping width: 2,800 mm * Front extension device * Sweeping material container: 1.8 m³ * Total water volume: 360 liters * Fresh water volume: 180 liters * Opening and tilting of the container via cable remote control * High-pressure cleaner: 150 bar / 15 liters with hose reel * Leaf suction hose: 150 mm diameter with 4,000 mm extension * Hydropneumatic comfort suspension on front and rear axles * Ideal for pedestrian and bicycle paths and narrow lanes * Air conditioning * EasyDrive (Hydrostatic drive) (SN) * Engine: VM R754EU6 - EURO 6c * Reversing and ground camera * Radio CD * Air-suspended driver's seat * 2 seats * Front and rear strobe lights * LED rear lights * Rotating beacon lights * LED daytime running lights * Wheelbase: 2,500 mm * GVWR: 4,500 kg * Unladen weight: 2,850 kg * Payload: 1,650 kg * Self-propelled working machine * If sold to commercial businesses and for export (both EU and non-EU), the German commercial law applies. If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops. Our offer generally does NOT include a new TÜV inspection, a new DGUV inspection, a new SP inspection, or a new UVV inspection. You can find more trucks on our website at: We speak the following languages: German, English, Polish, Turkish Note: We strongly recommend and offer an inspection and examination of the goods so that no false impressions arise about the condition and suitability with the buyer. Inspection and examinations are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicle. Subject to change, prior sale and errors.

Condition: used, Year of construction: 2013, pressure 320 t chamfer lenght 4100 mm distance between columns 3600 mm column arm 410 mm ram stroke speed 140 mm/sec work speed 10,5 mm/sec return speed 150 mm/sec work stroke 375 mm dayligth 650 mm table height 900 mm table width 220 mm oil volume 400 ltr. voltage 380 Volt total power requirement 30.0 kW weight 21300 kg range L-W-H 5350 x 2450 x 3150 mm Features: - DELEM DA66T CNC control system - CNC-controlled axes: Y1, Y2, X, R, Z1, and Z2, as well as CNC crowning - FIESSLER AKAS laser safety device in front of the machine (including FPSC) - Rear safety device: light barrier - BOSCH/HOERBIGER hydraulic components - SIEMENS electrical components - 2 front support arms - 1 freely movable dual foot control - Upper and lower tools Ndjdpfxsz I Dz Ao Afdsc

Condition: ready for operation (used), Schmidt 32-151-01 Toggle press PressControl 60 Compressive force: 15 kN Stroke: 40mm Follow-up time: 0.07 sec Overtravel: 15mm PressControl 60 Two-hand operation You are welcome to come by for a viewing. We will be happy to arrange a cost-effective forwarding agent for you. Ndodpfxjulf A Es Afdec organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: used, mileage: 212 km, power: 50 kW (67.98 HP), first registration: 03/2021, overall weight: 3,500 kg, fuel type: diesel, color: orange, gearing type: automatic, number of seats: 1, In accordance with our “General Terms and Conditions,” without any guarantee or warranty, we can offer you the following vehicle, subject to prior sale, errors, and omissions: Aebi Schmidt Flexigo 150 municipal vehicle with winter service equipment, including a spreader attachment and snowplow blade (Vehicle 777) Registration date: 29.09.2022 212 operating hours Engine: 2,216 ccm 50 KW / 68 HP Length: 4,157 mm x Width: 1,300 mm x Height: 2,160 mm Permissible total weight: 3,500 kg Unladen weight: 2,150 kg Payload: 1,350 kg TÜV (German technical inspection): 07/2027 Tires: 255/65R16, approximately 50% remaining Air conditioning Flexigo 150 carrier vehicle Engine: Perkins 404J-E22TA, 4 cylinders, 55 KW / 75 HP ISRI comfort driver's seat, air-suspended Radio with Bluetooth and hands-free system, USB connection, MP3 player Rear view monitoring system with infrared night vision camera + TFT monitor in the cab Additional suction shaft camera with infrared night vision and LED work light Transport speed: 40 km/h Hydr. pressure regulation for front linkage Adapter mounting triangle, Cat. 0 Tires as all-season tires 255/65R16 with alpine symbol incl. fender extensions Spreader superstructure Stratos S 06-(12) with 0.6 m3 container Auger conveyor Protective grid 40x40 mm Folding roof, stainless steel Drive via vehicle hydraulics Multifaster coupling set Control system Evolution Classic EC Spreader disc "350" 2-6 meters Intermediate frame for Multigo 1.4T Nsdpfoz Rrnwjx Afdodc 4 support legs, 1.4 tons load capacity, crank drive in the center Rotating beacon, tail light Splash guard, Multigo Snowplow Schmidt EN 17 2 pivoting cylinders Snowplow blade, PUR set Hydr. side adjustment via 2 hydraulic cylinders Adjustment group, hydraulic couplings Trailing wheels (set) Warning flags (set) Plow lighting/marker lights, LED Holder for warning flags and marker lights ¤ 30,000.00 (net) All information is provided without any guarantee or warranty. Our “General Terms and Conditions” apply. The place of jurisdiction for both parties for disputes up to €10,000 is the District Court of Ludwigslust; for disputes exceeding this amount, it is the Regional Court of Schwerin. Subject to errors, omissions, and prior sale.

Condition: reconditioned (used), Lead and feed spindle lathe Kern Type / Model: D 20 A Condition: Overhauled Technical data Center height: 215 mm Distance between centers: 600 mm Spindle bore: 50 mm Bed width: 300 mm Spindle speed (24): 31.5 - 1400 1/min Motor power: 4 kW Quill travel: 150 mm Weight: approx. 1500 kg Dimensions (W x D x H): approx. 2180 x 1180 x 1560 mm Equipment: - Geometry protocol - 3-axis digital display - Emergency stop button Ndsdpfxoy H Ecko Afdoc - Quick-change tool holder system Multifix - Machine light - Coolant system - Follower center

Year of construction: 2009, condition: ready for operation (used), Used piston membrane pump, feeding pump Abel HMD-G-32-0250 Yer of construction: 2009 Capacity: max. 25 m³/h Pressure: 15 bar Machine-number: 5100443-1 length: 3300 mm Nodpfx Aod Hf I Rsfdedc

Condition: used, Refrigerant compressors system DWM Copeland Nsdpfxsz Hu Spo Afdjdc -Type: D6DT5-320X-AWM/D (x4) -Volume: 126.9 m3/h (x4) -Cooling capacity: 280 kW at -10°C/40°C, 150.4 kW at -25°C/40°C, 92.8 kW at -35°C/40°C -Dimensions: 3600 x 1100 x 1950 mm -Items in magazine: 2 -Reference number: Z139 -Condition: Used in very good condition, ready to work

Year of construction: 2009, condition: ready for operation (used), machine/vehicle number: 5100443-2 , Product: Piston membrane pump, feed pump, used Njdpfx Aed Ey Sasfdsdc Type: Abel HMD-G-32-0250 Construction year: 2009 Power: max. 25 m³/h Pressure: 15 bar Machine number: 5100443-2 Length: 3300 mm Version: Acid resistant, FU controlled

Condition: used, mileage: 1 km, first registration: 01/2004, driver cabin: other, gearing type: other, Year of construction: 2004, * Auger spreader * Silo container capacity 2.0 m³ * Hydraulic drive * Electric control panel * PVC folding roof * Access ladder, spreading disc and chute made of stainless steel Miscellaneous: * Trade-in and purchase of vehicles and machines possible. * Sale price excludes transport and transfer. * No liability for printing or typographical errors. * Subject to prior sale, changes and errors. Nedpfxoznvvbj Afdsdc * Non-binding offer. * Photos may differ. Price applies to current condition. * All information without guarantee.

Condition: used, TECHNICAL DETAILS Quenching tank for stirring oil quenching - power : 0.25 [kW] Njdpfx Aeug U Thofdjdc - voltage : 3 x 380 [V]