Used Schneider Kreiselpumpe Neu for sale (3,340)

Condition: new, Year of construction: 2024, Machine: Schneider Kreiselpumpe 5000 Ltr Kreiselpumpe neu Fgsdpfx Afjz Ri Uzoush

Condition: like new (used), Year of construction: 2021, operating hours: 20 h, J. Neu Piccolo EP 150 oscillating panel saw, manufactured in 2021, in like-new condition. The original saw blade is still installed, and the saw has been used for a maximum of 20 hours. Therefore, it is in very good condition! Equipped with infeed and outfeed roller conveyors: 600 cm each. Power: 3.7 kW Fodpfx Ajz It Ewofusgh Saw blade: max. 500 mm (30 mm bore) Cutting height: 150 mm Optionally, a matching dust extraction unit from Holzkraft RLA 140 (manufactured in 2023) can also be purchased (see last picture). The machine can, of course, be inspected while powered on and thoroughly tested. The sale is to business customers only and excludes any warranty for defects. No guarantee, warranty, or right of return.

Condition: used, Year of construction: 2018, functionality: fully functional, Schneider Electric Masterpact NW32HF 3200 A four-pole drawout switch-disconnector, supplied with its matching withdrawable cradle/chassis. Heavy-duty low-voltage switching device suitable for use as a main incomer, bus-coupler or isolating switch in industrial distribution boards, generator systems, data centres and other high-current electrical installations. This is a switch-disconnector, not a circuit breaker with an electronic protection trip unit. The photographed configuration corresponds to the Schneider Masterpact NW32HF 4-pole, 3200 A drawout version. Technical details Manufacturer: Schneider Electric Series: Masterpact NW Model: NW32HF Schneider reference: 48321 Equipment type: Switch-disconnector / isolator Rated current: 3200 A Number of poles: 4 Version: Drawout / withdrawable Rated operational voltage: 690 V AC Frequency: 50/60 Hz Rated insulation voltage, Ui: 1000 V Fgodjzlivpspfx Afueh Rated impulse withstand voltage, Uimp: 12 kV Rated short-time withstand current, Icw: 85 kA / 1 second Rated short-circuit making capacity, Icm: 187 kA peak Utilisation category: AC-23A Standard: IEC 60947-3 Manual Push ON / Push OFF operating mechanism Rear high-current terminal connections Withdrawable cradle/chassis included Schneider identifies reference 48321 as a 3200 A, 690 V, four-pole drawout Masterpact NW32HF switch-disconnector

Condition: ready for operation (used), Schneider Electric XBTGT5330 10.4" Color Touch Panel SN:085960E0240371, the article was only used for test purposes, new condition, 100% functional, scope of delivery as per photos Fgedepf Ar Rspfx Afueh

Condition: ready for operation (used), Schneider Electric LXM62DU60C21000 Servo drive SN:2710072445 , the article was only used for test purposes,mint condition, 100% functional, scope of delivery according to photos Fjdpfx Afopf Arxeuogh

Condition: good (used), Schneider conveyor 345 x 50 cm Fixed speed, approx. 14.5 meter/min. More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. Fgedpfx Afez Rcgweush See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Year of construction: 2018, condition: like new (used), machine/vehicle number: 228240C0016, We offer this like-new, Delta Neu C1X63 belt-driven RDO 30kW high-performance shredder fan, manufactured in 2018. Manufacturer: Delta NEU Model: C1X63 belt-driven RDO 30kW Year of manufacture: 2018 Power: 30 kW Maximum speed: 2700 rpm Voltage: 3×400 V If you have any questions or require further information, please do not hesitate to contact us via message or phone. Fgsdozn Ulbopfx Afush The high-performance shredder fan is in its original packaging and has never been used. A manual/operating instructions in German is available. The machine is located in 59823 Arnsberg.

Year of construction: 2015, condition: used, Used Machine Year of manufacture: 2015 with refrigerated dryer Features and technical specifications: - Pressure: 10 bar - Suction capacity: 660 l/min - Speed: 1025 rpm - Tank capacity: 270 l - Noise level: 78 dB(A) - Effective flow rate: 520 l/min - Air outlet: 3/4"i - Drive power: 4 kW - Air intake capacity: 660 (l/min) - Drive type: V-belt - Tank design: vertical - Power (kW): 4.0 - Voltage (V): 400 V - Starting method: Direct-on-line (DOL) - Compression type: 2-stage Dimensions: 750 x 705 x 1800 mm Weight: 170 kg With DK 985 Eco refrigerated dryer: - Airflow at a pressure dew point of 3 °C: 600 l/min - Power consumption: 0.3 kW - Pressure drop: 0.25 bar - Voltage: 230 V Fgedpfx Aszk Nqksfush - With automatic condensate drain - Dimensions: 325 x 263 x 745 mm - Weight: 25 kg Availability: Immediate Storage location: 63934 Röllbach

Condition: new, Year of construction: 2018, functionality: fully functional, overall weight: 78 kg, load capacity: 15 kg, arm reach: 1,200 mm, Equipment: documentation/manual, We are offering this new Schneider Electric VRKP4S0RNC00000 industrial delta robot for sale. This robot has never been removed from its original packaging! Manufacturer: Schneider Electric Model: VRKP4S0RNC00000 Year of manufacture: 2018 Condition: new in box, never unpacked! Fjdpoz Atatefx Afujgh If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2018, functionality: fully functional, input voltage: 2,500 V, input frequency: 50 Hz, nominal power (apparent): 32 kVA, We offer a selection of brand new Schneider Electric components, all in original factory packaging. This equipment is ideal for industrial electrical installations, switchboards, and power distribution systems. 🔹 Switch Disconnectors (3P, 4P): Schneider MTZ2 25HF Schneider MTZ2 25HA Schneider MTZ2 16HA 🔹 Compact Breaker: Fgsdjwrzl Sepfx Afujh Schneider NS630b – 1600 A Compact 16 pc Schneider EF593816 – Front power connections NEW! 🔹 Molded Case Circuit Breakers (MCCB): Schneider NW25H2 – 2500 A – 4P Availability: In stock, ready for dispatch Photos, technical datasheets and prices available upon request

Condition: excellent (used), Year of construction: 2019, operating hours: 2,092 h, functionality: fully functional, machine/vehicle number: IT J320209, overall weight: 447 kg, total length: 1,935 mm, total width: 655 mm, total height: 1,680 mm, volume flow: 270.122 m³/h, operating pressure: 13 bar, pressure (min.): 5 bar, pressure (max.): 13 bar, noise level: 64 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, The compressor is in excellent condition!!! The electronics have been completely replaced!!! Only 2029 operating hours. For sale due to downsizing of the machine park!!!!...Completely overhauled, including filter replacement. Fedpfxjz Ah Uxe Afujgh

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 11906001, load capacity: 10 kg, arm reach: 1,300 mm, teach pendant manufacturer: Teach Pendant, Equipment: documentation/manual, Doosan M1013 Cobot NEW, 0 operating hours + Teach Pendant + 2x OnRobot 3FG15 + Dual Quick Changer Description Doosan Robotics M1013 Cobot – NEW – 0 operating hours – including Teach Pendant & 2x OnRobot 3FG15 and Dual Quick Changer. Doosan M1013 complete package – manufactured in 2023 – unused. For sale is a Doosan Robotics M1013, manufactured in 2023, in new and unused condition. The robot has not been put into operation and has 0 operating hours. The components are in their original packaging or in very good condition. Fsdpfxozx T Ate Afusgh Included in the scope of delivery: Doosan Robotics M1013 Cobot Doosan Teach Pendant Doosan Control Box all necessary connection cables original packaging programming/operating manuals 2 x OnRobot 3FG15 grippers OnRobot Dual Quick Changer suitable accessories and mounting material Thus, a complete package for professional automation applications is offered. The M1013 is suitable, for example, for: Machine loading Pick & Place Assembly operations Handling Parts feeding Quality control flexible automation of production processes Technical data Manufacturer: Doosan Robotics Model: M1013 Year of manufacture: 2023 Condition: New / unused Operating hours: 0 Payload: 10 kg Reach: 1,300 mm Axes: 6

Condition: good (used), Year of construction: 1979, functionality: fully functional, We are offering this used Schneider SL 1 long-hole drilling machine, model SL 1 7429, manufactured in 1979, for sale. Manufacturer: Schneider Model: SL 1 Machine No.: 7429 Year of Manufacture: 11/79 The advertised price is €1,400 net (negotiable). Fsdsz Afd Dopfx Afuegh If you have any questions or require further information, please feel free to send us a message or call us.

Condition: like new (used), Year of construction: 2013, functionality: fully functional, Vertical piston compressor with sound-dampening hood, DK 600Eco UNM STS 660-10-270 - Year of manufacture: 2013 - With mounted refrigeration dryer, 660 l intake capacity, 520 l delivery rate - 10 bar - Weight 245 kg - Sound-dampening hood - Condensate drain 4 kW, 400 Volt - Width 960 mm, Depth 740 mm, Height 1905 mm - Noise level 69 dB (A) - Very few operating hours - ABSOLUTELY LIKE NEW Fjdsypkr Uepfx Afujgh - TÜV inspection valid until August 2026, with corresponding inspection certificates Transportation available for an extra charge!

Condition: used, Year of construction: 2007, Format: 360 x 360 mm Fedjy Dufpspfx Afuegh Equipment: mobile envelope feeder format from 100 x 100 mm to 360 x 360 mm speed 15000 per/hours senor controlled for automatic speed adjustmend

Year of construction: 2023, condition: used, Used Machine Year of Manufacture: 2023 Features and Technical Specifications: - Stationary, oil-lubricated 2-cylinder piston compressor - Two-stage compression - V-belt drive - Intercooler and aftercooler - Condor pressure switch - Motor protection and safety valve - Tank pressure gauge - Check valve and relief valve - Condensate drain valve Fedpezy Dziefx Afusgh - Additional connection fittings with blind plugs - Rubber vibration dampers - Manhole opening for tank inspection - Tank compliant with AD-2000 regulations - Suction capacity: 660 l/min - Effective flow rate: 520 l/min - Maximum operating pressure: 10 bar - Motor power: 4.0 kW / 5.5 PS - Power connection: 400 V / 50 Hz - Start type: Direct start - Speed: 1,025 rpm - Vertical, internally coated 270-liter compressed air tank - Air outlet: 3/4-inch female thread with shut-off valve - Sound pressure level: 78 dB(A) - Dimensions: 750 × 705 × 1,800 mm - Weight: approx. 170 kg

Condition: like new (used), Year of construction: 2013, functionality: limited functionality, overall weight: 100 kg, Dismantled from an unused production line, in perfect condition. Without servo motors. 3 units available. Unit price: net 9,500 EUR Fgedpsxzc Iwjfx Afueh

Condition: new, Year of construction: 2019, functionality: fully functional, Sold as a lot. Schneider Electric ComPacT devices, unused, in original packing. Price on request. ComPacT NSX160F — 3 pcs. 4-pole moulded-case circuit breaker, terminals N, L1, L2, L3. Thermal-magnetic trip unit TM 160 D, 160 A at 40 °C, 50/60 Hz. Ui 800 V, Uimp 8 kV, Ue 690 V. Performance level F, Icu 36 kA at 380/415 V AC 50/60 Hz to IEC 60947-2; 85 kA at 220/240 V, 35 kA at 440 V, 30 kA at 500 V, 22 kA at 525 V, 8 kA at 660/690 V. Utilisation category A, suitable for isolation. Terminal shields and cable lugs included. ComPacT NS800NA — 16 pcs. Switch-disconnector, type NA, 3-pole, fixed, manual operation, front connection. Type NS800NA3PMF. Ui 800 V, Uimp 8 kV, Ue 690 V, Icw 25 kA for 0.5 s, Icm 52 kA peak, Ith 800 A at 60 °C, AC-23A 690 V / 800 A, 50/60 Hz, IEC 60947-3. Front connection kit supplied: copper links, phase barriers, bolts and terminal covers. Fodpfxew I Twqs Afuegh

Condition: excellent (used), Year of construction: 2006, Double finisher 842 Multimatic with control system, year of manufacture 2006, original price €20,110   Garment former and trouser topper rotatable on a single column Finishing process in a closed cabin Integrated cabin extraction system with automatic control Doors close automatically Flexible processing of various garments and sizes Computer control with nine freely programmable memory slots Airflow regulation for particularly delicate garments Space-saving and minimal impact on the working environment due to the finishing process Heated by external steam or fully electric with a built-in electric steam generator   Are you looking for an all-rounder for jackets and similar items? - Multimatic double finisher 842   With the Multimatic double finisher 842, jackets, blazers, coats, trousers, and similar items can be automatically finished. It consists of a form finisher and a trouser topper. The two devices are rotatable and mounted on a single column. For finishing, the previously loaded element (form finisher or topper) is swiveled into a cabin. The doors close automatically, and the finishing process takes place in the closed cabin. Automatic finishing, high performance, energy-saving, low noise, small footprint. Year of manufacture 2006, original price €20,110 Fgedpfx Afegtiddoujh The machine is in perfect working order.   You can find more items - new and used - in our shop! International shipping costs on request!

Condition: used, Year of construction: 1981, Used Machine Fgjdpfx Aezk N Dqsfueh Year of manufacture: 1981 Features and Technical Specifications: - With 2-stage pneumatic lifting spindle - Mandrel diameter: 40 mm - With long table length: 2500 mm - With extendable frame support - With milling stop featuring Panhans metal stop jaws and fine adjustment - Machine must be inspected/overhauled. Basic functions are intact Availability: Immediately Location: Röllbach

Condition: excellent (used), Year of construction: 2013, Dry-type cast-resin distribution transformer – manufacturer Schneider Electric (France), Trihal model; rating 2000 kVA, 22 (2x±2.5%)/0.42 kV, Dyn1, IP00 (no enclosure), Al-Al windings, year of manufacture 2013, functional. Fedpfx Ajz E A Ucefuegh

Condition: good (used), Year of construction: 2021, Frequency converter, frequency transformer, drive converter, controller, variable speed drive, inverter -Manufacturer: Schneider Electric, Altivar 630 frequency converter -Type: ATV630D90N4 -Power: 90 kW -Input: 380-480V / 50/60Hz / 156 A Output: 380-480V / 0-500 Hz / 173 A Quantity: 1 piece available -Dimensions: 800/290/325 mm -Weight: 55 kg Fsdpexlzibefx Afujgh

Condition: used, Year of construction: 1991, Used Machine Year of manufacture: 1991 Condition: overhauled; photos show the machine as it was when acquired. Features and Technical Specifications: - Designed for all window tooling systems with tool diameters up to 400 mm - Thanks to the standard braking systems (foot brake for the slotted spindle, automatic electronic safety brake for the saw), the machine can be brought to a stop in just a few seconds - The protective covers for the slotted spindle and crosscut saw are designed so that the tools can be easily and conveniently without having to remove the guards themselves - The crosscut saw can be conveniently adjusted from the workstation using a quick-adjustment mechanism. A six-position turret allows for quick adjustment to various dimensions - The height of the 40 mm slotted spindle can be precisely adjusted using an ergonomically positioned handwheel with 0.1 mm graduations - The sturdy roller table, in combination with hardened and ground guideways, can be easily moved with minimal effort - Slotted spindle motor: 5.5 kW - Slotted spindle speeds: 3000/4500 rpm - Spindle diameter: 40 mm - Clamping length: 140 mm - Slotted spindle height adjustment: 100 mm - Exhaust port: 120 mm - Crosscut saw motor: 2.2 kW - Cutting-off saw speed: 2,950 rpm - Saw blade shank: 30 mm - Max. saw blade diameter: 400 mm - Max. cutting height: 125 mm - Pneumatic tool clamping - With Festo LAS stop Weight: approx. 600 kg Current photos coming soon! Availability: available shortly Fedpezk Npyefx Afuegh Location: Röllbach

Condition: excellent (used), For sale: Professional Schneider Electric Masterpact NW25 H1 circuit breaker equipped with a Micrologic 5.0 A protection unit. This device is used in industrial power distribution systems—such as low-voltage switchboards, manufacturing plants, industrial halls, and power installations. The Masterpact NW series circuit breakers are designed for demanding industrial environments and provide reliable protection against overloads and short circuits. The unit is in very good visual and technical condition—the exact condition can be seen in the photos. Technical Specifications: Fgjdpfxoyua Amo Afuoh Manufacturer: Schneider Electric Series: Masterpact NW Model: NW25 H1 Protection unit: Micrologic 5.0 A Rated current: 2500 A Insulation voltage: Ui 1000 V Impulse withstand voltage: Uimp 12 kV Operating voltage: up to 690 V AC Breaking capacity Icu: 65 kA Ics: 100% Icu Standard: IEC 60947-2 Frequency: 50 / 60 Hz Utilization category: AC23A Year of production: 2011 Assembly location: Schneider Electric Venray (Netherlands) The circuit breaker protects installations against overloads and short circuits, and allows for adjustment of protection parameters thanks to the Micrologic unit. Applications: • Low-voltage switchboards • Industrial facilities • Power installations • Energy distribution systems • Large machinery and production lines ✔ Robust industrial construction ✔ High breaking capacity ✔ Adjustable Micrologic protection settings ✔ Equipment from the renowned manufacturer Schneider Electric

Condition: used, Year of construction: 2000, Used, good condition Make: Schneider Type 2406 Year of manufacture: 2000 Machine no. 910 CE-certified Cutting height 250 mm Saw blade tiltable between 90° and 30° (60°) Turntable rotatable 180° Motor power 7500 W, 400 V Saw blade diameter 650 mm Cutting height for rip cuts Continuously adjustable from 0 to 250 mm Cutting width adjustment for rip cuts 650 mm by transverse saw movement Motorized tilting with digital display Movable machine stand Automatic saw feed with two-hand control Laser kerf indicator, cross cut Pneumatic workpiece clamping on the right and left New price approx. €25,000.00 Extraction connection 100 mm Space required approx. 2800 mm x 2800 mm x 2000 mm Weight approx. 900 kg Storage location 97447 Gerolzhofen, free on freight, unpacked Handed over in as-is condition, as seen, without warranty or guarantee Fodpfowkvw Hox Afujgh