Used Schwarzmüller Satt Low Loader Semitrailer for sale (15,437)

Condition: used, empty load weight: 11,945 kg, maximum load weight: 36,055 kg, overall weight: 48,000 kg, axle configuration: > 3 axles, first registration: 01/2024, suspension: air, tire size: 235/75 17,5, tire condition: 50 %, color: orange, Year of construction: 2024, front tire size: 235/75 17,5, rear tire size: 235/75 17,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 41742 Faymonville, Platform trailer * Year of manufacture: 2024 * ABS, Anti-lock Braking System * Air suspension * Steerable axle * Rear-steering axle * Air connection, coupling head (red + yellow) * Connection plug, 2x7-pin * Lifting and lowering device * Telescopic – telescopic drawbar * Hydraulic ramps * Suspension: Air * Gross vehicle weight: 48,000 kg * Tare weight: 11,945 kg * Payload: 36,055 kg * Permissible gross vehicle weight: 48,000 kg * Axle manufacturer: BPW * Tire condition, 1st axle: 40% -- 40% - Tire size: 235/75 R17.5 * Tire condition, 2nd axle: 50% -- 50% - Tire size: 235/75 R17.5 * Tire condition, 3rd axle: 50% -- 50% - Tire size: 235/75 R17.5 * Tire sizes: 235/75 R17.5 * Loading area: 9300 mm + 4500 mm extension * Ramp length: 4200 mm * Hydraulic ramps, foldable and adjustable to the side * Wheel arch * Extendable * Overwidth signs * Container locking mechanism * Aluminum support legs Disclaimer: Subject to changes, prior sale and errors. You can find more pictures and videos on our website. Our extensive services include, for example: * Purchase/sale/rental of commercial vehicles * Quick and straightforward financing * Application for all (export) documents * Ordering export license plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. Lrodpfx Agjz Enqpsrot * Professional loading/load securing * TÜV inspections, registration service * Transport of commercial vehicles Please contact our trained specialists; we will be happy to advise you.

Condition: used, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 02/2017, Equipment: ABS, Very clean, like-new semi-trailer!! Technical data: Mega-Z-3L-V-BB-A-18ZT-7.50(2.54)-17.5-2.54-(Combine Harvester) Total weight: 48,000 kg Gooseneck length approx.: 4080 mm Loading area length approx.: 7500 mm Technically extendable by approx.: 5500 mm Width of loading area approx.: 2540 mm Loading height at max. load approx.: 400 mm Ground clearance in non-extended state approx.: 100 mm Loading height rear chassis at max. load approx.: 900 mm Axle spacing: 1360 mm Technical description Gooseneck: "Light" gooseneck, length approx. 4,080 mm. Gooseneck hydraulically raisable/lowerable and extendable. Technical saddle load: 22,500 kg For semi-trailer tractors: 4 x 2, 6 x 2 and 6 x 4 Lowbed: Lowbed as extendable excavator bridge, width 1,000 mm, length approx. 7,500 mm with mechanical locking. Chassis and axles: Chassis with closed outer frame and diamond plate covering. Chassis with continuous excavator recess approx. 750 x 200/280 mm, open at the rear. SAF axles and suspension, all axles hydro-mechanically steered. Air suspension with lifting and lowering valve. Tires MICHELIN XTE 2+235/75 R 17.5 twin tires, load index (143/141J) Lighting system 24-volt lighting system in "ASPÖCK-NORDIK fullLED" Included accessories Front wall made of steel, extendable, height approx. 400 mm. Lrsdpfez El T Ijx Agret On the gooseneck, 1 pair of plug-in aluminum side panels, approx. 400 mm high. 1 plug-in aluminum rear panel on the gooseneck, height approx. 400 mm, anodized. 3 pairs of recessed lashing rings on the gooseneck (LC 5,000 daN) 2 pairs of welded lashing rings LBS 3 (LC 6,000 daN), at the front (approx. 600 mm behind the front wall) and at the rear of the gooseneck 2 pairs of welded lashing rings LBS 3 (LC 6,000 daN), on the outer frame of the gooseneck. Above the gooseneck, approx. 12 mm thick "DELIGNIT" surface. 2 kingpins. Hydraulic support beam for supporting the gooseneck on the semi-trailer tractor. 2 pairs of rung pockets recessed on the gooseneck, for plug-in stanchions approx. 100 x 100 mm. Hydraulic connections from the gooseneck to the lowbed with multi-coupling instead of screw couplings. Attachment rail for loose aluminum ramps on the gooseneck. Folding, extendable wideners, lockable to approx. 2,540/2,750/3,000 mm, incl. steel mattresses in a split design, with wooden surface. Insertion possibilities on the outer beam for the folding wideners approx. every 500 mm. The wideners can be extended and turned around, resulting in a loading area that is approx. 60 mm lower. Lashing rings with retaining spring approx. every 1,200-1,300 mm on the inner beam of the excavator bridge. Lashing rings with retaining spring approx. every 1,200-1,300 mm on the outer beam of the excavator bridge (LC 10,000 daN). 2 pairs of lashing rings with retaining spring at the transition from the lowbed to the excavator recess (LC 10,000 daN). 4 pairs of recessed lashing rings in the outer frame of the chassis, foldable outwards. - One pair at the front and one pair at the rear (LC 5,000 daN). - All other lashing rings (LC 10,000 daN). Attachment option for the steel mattresses when not in use using stanchions and spacers on the chassis. Electro-hydraulic unit approx. 3 kW to operate the hydraulic operations, except for the hydraulic winch. Trailing from the front and rear using a cable remote control with push buttons, with single-axle control. Holder for warning signs left and right including 3-pole socket, under the gooseneck and in front of the first axle and at the rear of

Condition: new, maximum load weight: 35,240 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 13,200 mm, total length: 13,200 mm, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, Kässbohrer K.SLH S HS 3 / 3H – 18 / 30 Low-bed trailer / 3-axle / hydraulically steered Immediately available, also available with a grating floor. Manufacturer: Kässbohrer * Type: K.SLH S HS 3 / 3H – 18 / 30 * 3-axle low-bed trailer * BPW axles * Air suspension * Drum brakes * 1st, 2nd and 3rd axles hydraulically steered * Axle liftable * Manual lift axle control * WABCO EBS 2S/2M with ABS and RSS * Tires: 245/70 R17.5 * M+S / 3PMSF tires * Tire pressure monitoring system * WABCO SmartBoard * Electric motor pump for steering * Semi-automatic single-lane operation of the hydraulically steered axles Dimensions / Weights: Overall length: 13,250 mm * Overall width: 2,550 mm * Saddle height: 1,250 mm Lrsdez Ec Trjpfx Agret * Gooseneck length: 3,900 mm * Platform length: 9,300 mm * Platform height: 875 mm * Wheelbase: 8,800 mm * Axle distance: 1,360 mm * Tare weight: approx. 12,760 kg * Technical axle load: 30,000 kg * Kingpin load: 18,000 kg * Technical total weight at 80 km/h: 48,000 kg * Technical total weight at 40 km/h: 51,000 kg Wiese Transporttechnick - Dealer Chassis / Loading platform: High-strength S700 MC steel * 45 mm hardwood floor * Steel floor with drop structure over the wheels * Lateral widening * Widening by up to 300 mm * 2" kingpin * Mechanical rear supports, load capacity 45 t * Partially metallized chassis * Rear end chamfered 500 mm / 10° Wiese Transporttechnick - Dealer Ramps: Hydraulic, foldable ramps * Ramp load capacity: 40 t * Ramp length: 2,750 mm * Ramp width: 850 mm * Hydraulically movable * Hardwood covering * Hydraulic gooseneck ramps * Ramp securing via chain tensioner Wiese Transporttechnick - Dealer Load securing / Equipment: Lashing points: 10 × 10 t / 12 × 8 t / 22 × 5 t * 16 stake pocket 80 × 80 mm * 4 container locking pockets for 1 × 20 ft * Tool box on the gooseneck, approx. 2,540 × 600 × 460 mm * Central lubrication system * LED rotating beacon * 2 work lights at the rear * Extendable warning boards with LED position lights * Storage box for widening timbers * Chassis color: RAL 3020 Traffic Red Other: LED lighting * Aspöck EUROPOINT 3 LED * Spare wheel holder * 12 rims/tires * Widening panels * Extensive heavy-duty / construction machinery equipment Errors, changes and prior sale reserved.

Condition: used, maximum load weight: 7,040 kg, overall weight: 9,900 kg, axle configuration: 2 axles, first registration: 02/2016, loading space length: 9,600 mm, loading space width: 2,000 mm, total width: 2,070 mm, total height: 1,800 mm, * 2nd owner, from municipal ownership Lredsv T E Syopfx Agret * Rear loading platform height 90 cm, front 140 cm * Total loading length 9600 cm * Fifth wheel size approx. 1.20 m * Toolboxes * Access ramps * Matching fifth wheel coupling included Errors, typographical mistakes and interim sale reserved. Viewing by appointment.

Condition: used, maximum load weight: 31,300 kg, overall weight: 45,000 kg, axle configuration: 2 axles, first registration: 01/2024, total length: 13,110 mm, total width: 2,550 mm, Equipment: ABS, DOLL panther T2E-S3FS21 | 2-axle lowboy | Telescopic | hydraulic forced steering For sale is a DOLL panther T2E-S3FS21 2-axle telescopic lowboy semi-trailer with a hydraulically extendable gooseneck and hydraulic forced steering. Vehicle data: First registration: 2024 * Permissible total weight: 45,000 kg at 80 km/h * Technical payload: approx. 31,300 kg * Tare weight: approx. 13,700 kg * Color: RAL 9005 deep black * Chassis number: W09T2E224P0D46351 Dimensions: Overall length: 13,110 mm * Overall train length: 16,500 mm * Lowboy bed: 6,700 mm * Telescopic extension by an additional 5,660 mm * Lowboy bed width: 2,550 mm * Fifth wheel height: 1,240 mm * Loading height, lowboy bed loaded: approx. 300 mm * Up to §70: Total weight up to 56,250 kg / Payload up to 42,550 kg Equipment: 2-axle panther axle system Lodpozt D Snjfx Agrort * Hydraulic forced steering * Steering angle up to 55° * 12-ton axles * BPW brake with ECO hub system * WABCO EBS-E with ABS and RSS * Hydraulic suspension * Hydraulically extendable gooseneck * 2" kingpin, 21-ton version * Extendable flatbed * 45 mm hardwood floor * Loading ramps * Excavator bucket at the rear * Stainless steel toolbox * Preparation for container locking Control / Technology: DOLL Tronic CAN-bus control system * DOLL control display * DOLL connect wireless remote control * Electronic single-lane operation DOLL connect EEP * Weighing system for rear axle load * Tire pressure and temperature monitoring OptiTire * Auxiliary steering * BekaMax central lubrication system Tires / Lighting: Continental 245/70 R17.5 * M+S / 3PMSF * Spare wheel * LED lighting * LED work lights * LED warning lights * Telescopic warning signs with LED marker lights The trailer is extensively equipped and is particularly suitable for the transport of construction machinery, industrial machinery, and heavy loads. Errors, changes, and prior sale are subject to change. We are happy to provide further information.

Condition: used, maximum load weight: 38,170 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 08/2015, loading space length: 13,085 mm, loading space width: 2,550 mm, total length: 13,300 mm, total width: 2,550 mm, total height: 3,700 mm, Year of construction: 2015, Equipment: ABS, ES-GE 3-Axle Lowboy Semi-Trailer | Extendable | Wheel Recesses | Aluminum Ramps | Lift/Steering Axle Description: For sale is a high-quality and extremely versatile ES-GE 3-axle lowboy semi-trailer from the initial registration year. The vehicle stands out due to its extensive special equipment, which enables maximum flexibility in the transport of heavy construction machinery, wheel loaders, excavators, and containers. Thanks to the extendable loading platform and the integrated wheel and excavator recesses, the semi-trailer is equipped for virtually any challenge. Vehicle Data & Weights: First Registration: 08/21/2015 * Permissible Total Weight: 48,000 kg * Axle Load: 30,000 kg (3 x 10,000 kg) * Fifth Wheel Load: 18,000 kg * Fifth Wheel Height: 0.95m Dimensions & Chassis: Overall Length: approx. 13,085 mm (extendable by max. approx. 4,060 mm) * Loading Platform Length / Height: approx. 8,750 mm / approx. 860 mm (loaded) * Width: approx. 2,550 mm (extendable by means of galvanized brackets to approx. 3,000 mm) * Chassis: High-strength fine-grained steel (suitable for point load 30 t on 4 m) * Floor: Robust hardwood floor (approx. 38 mm), checkered plate covering above the axle assembly * Paintwork: Solid color in RAL 5010 Blue, rims in silver Suspension & Axles: Axles: 3 x 10,500 kg Gigant axles, air-suspended with lifting and lowering function * 1st Axle: Designed as a lift axle * 3rd Axle: Designed as a trailing steering axle * Braking System: Two-line braking system (ABS-EBS), Knorr brake TIMG2 (Smart-Board) * Tires: 12-ply, 235/75 R 17.5 Lsdpfx Asz Edhqegrsrt * Tire Tread Depth: 1=80% 2=60-80% 3=30-60% Special Equipment & Highlights: Ramps: 1 pair of 2-piece aluminum ramps (approx. 2,900 + 1,450 x 600 mm), hydraulically liftable and lowerable, mechanically movable (load capacity approx. 15,000 kg/piece) * Wheel Recesses: 2 pairs of wheel recesses in the lowbed including matching aluminum covers * Excavator Recess: Integrated excavator recess at the rear between the axles (approx. 650 x 2,000 x 300 mm) * Container Locking: 2 pairs in the loading platform (for 2x 20' and 1x 40' containers), 1 pair on the gooseneck, and 1 support leg for the front wheel recess * Weight Optimization: Front supports and air tank made of lightweight aluminum instead of steel * Load Securing: 9 pairs of stake pockets in the outer frame, 1 row of stake pockets transversely on the gooseneck, numerous swivel lashing points (6 t WLL / 12 t LC) * Lighting & Safety: LED taillights, LED side marker lights, 2 LED reversing lights, 4 retractable LED widening lights (up to approx. 4,500 mm width) incl. night parking signs * Corrosion Protection: High-quality treatment with zinc dust primer (90%) according to DIN/ISO 12944 * Pneumatics: Couplings in comfortable "DUOMATIC" design The vehicle is in an operational condition. Sale is from the location. For further questions, detailed pictures or to arrange a viewing appointment, please do not hesitate to contact us! New main inspections / safety checks or weight reductions/increases are possible upon request. We will be happy to assist you in obtaining export/transfer license plates; a transfer of your purchased vehicles within the Federal Republic is also possible. Contact us! ---- We speak the following languages: German, English and Russian! ---- No liability for printing & typographical errors, changes, prior sale and errors reserved! ---- Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl on the Rhine. Than

Condition: used, maximum load weight: 23,900 kg, overall weight: 31,000 kg, axle configuration: 2 axles, first registration: 06/2007, Year of construction: 2007, Internal vehicle number: G400178 Available immediately at our yard in Kaufungen More information: Luis Lucena Viktoria Sologubova Müller-Mitteltal TS2 KOMPAKT low-loader trailer – 2 axles – hydraulic ramps Robust Müller-Mitteltal TS2 KOMPAKT low-loader trailer from 2007. This 2-axle trailer features hydraulic loading ramps, air suspension, and a payload capacity of 23,900 kg. With a permissible gross weight of 31,000 kg, it is ideally suited for transporting heavy construction and industrial machinery. Technical data: * Vehicle number: G400178 * Vehicle condition: Used * Category: Low-loader trailer * Manufacturer: Müller-Mitteltal * Model: TS2 KOMPAKT * First registration: 06/2007 * Year of manufacture: 2007 * Axles: 2 * Permissible gross weight: 31,000 kg Lrjdpfxozahg De Agrot * Unladen weight: 7,100 kg * Payload: 23,900 kg * Overall length: 10,800 mm * German vehicle Equipment: * Hydraulic loading ramps * Air suspension * 2-axle chassis * Robust low-loader design Inspection and functional testing possible by prior appointment. Further information, photos, and videos are available upon request. Subject to errors, changes, and prior sale. We will gladly accept your used vehicle as part of the payment. Financing directly with us is possible. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, maximum load weight: 26,830 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 04/2025, next inspection (TÜV): 04/2027, 3-axle Kässbohrer KSLA RJ Mega Low-bed semi-trailer | Extendable by 3,500 mm | Widening capability of 600 mm VIN: WKVDAS00300125992 Chassis / Components: * Fifth wheel height 950 mm * Air suspension * Raise and lower function * Lift axle, 1st axle * Trailing steering axle, 3rd axle * 3 x BPW axles * WABCO braking system * JOST support legs * Load manometer * NATO socket * Toolbox * Galvanized widening extensions * Widening brackets * Lashing rings * Overwidth signs with lighting * Rear supports * Tires: 205/65 R17.5 * Remaining tread depth 80-90% * Electric winch NOVAWINCH T-8000 Lrodpjzcil Tofx Agrjt * Radio remote control for winch * Several lashing ring tensioners / lashing ring accessories in the toolbox * Large steel toolbox on the platform Superstructure: * Kässbohrer KSLA RJ Mega Low-bed semi-trailer * Wheel recesses * Wheel recess covers * Excavator arm recess * Extendable by 3,500 mm * Widening capability of 600 mm * Loading area length: 11,980 mm + 3,500 mm extension * Width: 2,550 mm + 600 mm widening * Platform height: 820 mm * Fifth wheel height: 1,130 mm * Wooden floor / Steel floor * Aluminum side panels on the upper platform * Hydraulic two-part ramps * Left and right ramps can be operated separately hydraulically Weights: * Gross weight: 39,000 kg * Payload: 26,830 kg * Tare weight: 12,170 kg * Fifth wheel load: 15,000 kg Other: * First registration: 10.04.2025 * German registration * TÜV (technical inspection): 05/2027 * HU (main inspection): 10/2027 ----New main inspections / safety checks or weight reductions/increases are possible upon request. We will gladly assist you in obtaining export/transfer registration plates, and we can also arrange for the transport of your purchased vehicles within Germany. Contact us! We speak the following languages: German, English, and Russian! No liability for printing and typographical errors, changes, prior sale, and errors. We reserve the right to make changes. Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in the preparation and sale of commercial vehicles, we are a reliable partner for our customers. A particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. You will find a wide range of vehicles on an area of 11,000 m². Our corporate philosophy is characterized by fairness and integrity. Since customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in the purchase or sale of vehicles. See for yourself! Our service for you: Loading of vehicles We will gladly assist you in loading your purchased vehicles. Organization of special transport We will gladly assist you in organizing special transport. Day registration / Export registration plates We will gladly assist you in obtaining export registration plates/short-term registration plates. Handling customs formalities We will gladly assist you in handling customs matters.

Condition: used, maximum load weight: 37,240 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 03/2021, loading space length: 19,500 mm, loading space width: 2,550 mm, Year of construction: 2021, Equipment: ABS, Manufacturer HRD Model Lowloader 6,5 m. Extension Year 2021 Lsdpfx Aoz Ddp Eegrjrt Condition Very good Serial Number W09STTM3NMEN10036 Ref. nr. 8199 Reg. date: 10-03-2021 Drum brake: ? ABS: ? Rear axles: SO F Suspension: Air Tire Size: 235/75R17,5 Cover% left 40 - 40 - 40% Toolbox: ? Total weight: 48000 kg. Net weight: 10760 kg. Inside length: 19500 mm. Internal width: 2550 mm

Condition: used, maximum load weight: 33,525 kg, overall weight: 46,000 kg, axle configuration: > 3 axles, first registration: 04/2008, Year of construction: 2008, Equipment: ABS, Manufacturer Kel-Berg / Faymonville Model 4 akslet 3 m Udtræks Maskintrailer Year 2008 Condition Good Serial Number SKBE58S407KE12547 Ref. nr. 7972 Reg. date: 30-04-2008 Drum brake: ? ABS: ? Rear axles: SO F Suspension: Air Tire Size: 235/75R17,5 Cover% left 30-50% Toolbox: ? Total weight: 46000 Kg Net weight: 12575 Kg Lrodpexa Tdmofx Agrot Load capacity 33425 Kg Inside length: 8.75m / 12.10m Extraction: 3 m Forced steering axles: 3+4 Hydraulic ramps: ? Hydraulic rear support leg: ?

Condition: new, maximum load weight: 35,800 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory with vehicles available immediately and in the short term on our website. Excerpt from the equipment. Complete equipment available upon request. Chassis, gooseneck: Special steel frame made of high-strength fine-grain steels, electrically welded at the connection points, well-dimensioned outer frame. 3-axle arrangement. Wheel arch above the axles with spray mist suppression. All steel parts sandblasted. Lateral impact protection made of anodized aluminum mounted. Increased point load of approx. 30,000 kg over approx. 5,000 mm. Special design in the gooseneck area for maximum possible low-bed length in combination with the AluLeg outrigger supports, instead of telescopic outrigger winches, max. rear pivoting radius of the semi-trailer tractor unit 2,100 mm. Special superstructure with rear girder widening: DINKEL - special superstructure. Self-supporting aluminum roof beam / profile approx. 100 x 100 mm, sliding tarpaulin with plastic flaps. Rear girders can be widened to approx. 4,200 mm (only for loading and unloading). Three sliding girders per side with rubber strap relief. Additional center girder locking in the roof beam and parking position, by means of a pull cable and spring latch. DINKEL - lifting roof, mechanically height-adjustable. Lifting roof height approx. 400 mm, operable on both sides or on one side. Without opening the opposite side and the doors. Additional height adjustment of approx. 480 mm in approx. 40 mm increments, with height adjustment in the girders. Front cover on the front wall for operation under a tarpaulin up to a total height of 4,400 mm. Four rows of stackable approx. 150 mm aluminum slats on the side, with 450 mm pockets at the bottom, above 4 rows of individual pockets. In the upper bed, only 3 rows of insert slats. Evenly distributed spacing. Floor: approx. 27 mm special water-resistant glued beech - screen-printing panels, rough surface. Steel sheet in the wheel arch area. Forklift-compatible according to DIN standard. Outer frame flush with the surface. Brakes: WABCO air brake system with EBS according to EC standard 71/320 EEC including PREV (parking/release safety valve). Spring brake cylinders as parking brake. Wabco Smart Board with odometer and unit load display. Including WABCO tire pressure monitoring system. Axles: 3 x 10,000 kg SAF/Sauer with drum brakes in a low-bed design. Air suspension with lifting and lowering device, total stroke approx. 230 mm. Third axle as a friction-controlled trailing axle with electric and mechanical lock. Twin tires: 235/75 R 17.5, -12-ply. Premium brand of our choice, including E-wheel chocks. Lighting: according to EC standard including side lights in LED design. Position lights in LED design. 2 additional reversing lights. 2 work lights on the front wall inside, top. Painting: Chassis with superstructure in RAL color of your choice. Center girders, axles powder-coated black. Corner girders in hot-dip galvanized design. Plastic parts black. Hot-dip galvanized parts unpainted. Rims in factory silver. Special equipment including: - E-supply line 15-pin - Air suspension in ECAS design, operation on the semi-trailer - Overwidth signs front and rear in galvanized, steplessly telescopic design with attached marker lights including sockets for flashing beacons (small signs) - Center girders with additional roof beam locking, by means of a pull cable - operation from below - Sliding tarpaulin support unlocking also from Ljdpfxoz Dmnwj Agrjrt

Condition: new, maximum load weight: 45,250 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. The following is an excerpt of the equipment. Complete equipment details are available upon request. Ledpez Dmn Rofx Agrert Chassis, gooseneck: Special steel frame made of high-strength fine-grained steels, electrically welded at the connection points, well-dimensioned outer frame. 4-axle arrangement. Wheel arches above the axles with spray mist suppression. All steel parts are sandblasted. Lateral impact protection made of anodized aluminum installed. Increased point load of approximately 30,000 kg over approximately 4,000 mm. Special design in the gooseneck area for maximum low-bed length in combination with AluLeg support legs instead of telescopic support winches, maximum rear swivel radius of the tractor unit approximately 2,100 mm. Special superstructure with rear beam widening: DINKEL – special superstructure. Self-supporting aluminum roof beam/profile approximately 120 x 100 mm, sliding cover with plastic flaps. Rear beams can be widened to approximately 4,200 mm (only for loading and unloading). Three sliding beams per side with rubber strap relief. Additional center beam locking mechanisms in the roof beam and parking position, using a pull cable and spring latch. DINKEL – lifting roof mechanically height-adjustable. Lifting roof height approximately 400 mm, operable on both or one side, without opening the opposite side and the doors. Additional height adjustment of approximately 480 mm in approximately 40 mm increments with height adjustment in the beams. Front overhang on the front wall for operation under a tarpaulin up to a total height of approximately 4,400 mm. Four rows of stackable approximately 150 mm aluminum slats on the sides, with 450 mm pockets at the bottom and 4 rows of single pockets above. In the upper bed, only 3 rows of insertable slats. Spacing between slats evenly distributed. Floor: Approximately 27 mm special water-resistant glued beech plywood, rough surface. Steel sheet in the wheel arch area. Forklift drivable according to DIN standard. Outer frame flush with the surface. Brakes: WABCO air brake system with EBS according to EC standard 71/320 EEC including PREV (parking release safety valve). Spring-loaded brake cylinders as parking brake. Wabco Smart Board with odometer and unit load indicator. Includes WABCO tire pressure monitoring system. Axles: 4 x 10,000 kg SAF/Sauer with drum brakes in low-bed design. Air suspension with lifting and lowering device, total lift approximately 230 mm. Third and fourth axles as friction-jointed trailing axles with electrical and mechanical lock. Twin tires: 235/75 R 17.5, -16-ply. Manufacturer of our choice, including E-wheel holder. Without E-wheel. Lighting: according to EC standard including side lights in LED design. Position lights in LED design. 2 additional reversing lights. 2 work lights on the front wall inside, at the top. Painting: Chassis and superstructure in a single color in the RAL color of your choice. Center beams, axles coated with KTL (cathodic electrodeposition) in black. Corner beams in hot-dip galvanized design. Plastic parts in black. Hot-dip galvanized parts unpainted. Rims in factory silver. Special equipment included: - E-supply cable 15-pin - Air suspension in ECAS design, operated on the semi-trailer - Overwidth signage at the front and rear in zinc-plated, continuously telescopic design with attached boundary lights including so

Condition: used, functionality: fully functional, empty load weight: 10,210 kg, maximum load weight: 35,790 kg, overall weight: 46,000 kg, axle configuration: 3 axles, first registration: 01/2025, next inspection (TÜV): 01/2027, loading space length: 8,500 mm, loading space width: 2,525 mm, suspension: air, tire size: 235/75, tire condition: 80 %, color: silver, Equipment: ABS, Object number #31045 BPW axles Steering axle A3 Lift axle Drum brake Tires 235/75 R 17.5 Low-loader 8,500 x 2,525 mm Platform, front, including ramp 3,300 x 2,495 x 500 mm Hydraulic ramps 4.65 x 0.72 m Excavator arm rest Bucket recess 2 pairs of wheel recesses 4x extendable warning signs Wabco Smart Board Can be widened to 3,000 mm Various heavy-duty tie-down straps ABS/EBS Raise/Lower LT aluminum support legs 2x rear support Work lights Side underrun protection Rotating beacon Perforated outer frame, platform, front Lrsdpfoz Dwdcox Agrot Leasing or financing possible upon request!!!

Condition: used, axle configuration: > 3 axles, first registration: 01/2023, Year of construction: 2023, Number of axles: 8 Axle type: Swinging axles Steering: Hydraulic Suspension type: Hydraulic Tires: 245/70 R17.5 Kingpin: 3.5" Color: RAL 5009 Azure Blue Gooseneck length: 3700 mm Overall width of the vehicle: 2990 mm Platform length: 15000 mm Telescopic: Yes / Length of extension 1: 8000 mm Saddle height: 1415 mm Saddle load: 30,000 kg Axle load: 96,000 kg Tare weight: 36,200 kg Lodpfjz Ed D Esx Agrjrt Maximum permissible load: 126,000 kg Payload: 89,800 kg

Condition: used, maximum load weight: 27,300 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 04/2013, next inspection (TÜV): 08/2026, loading space length: 11,700 mm, loading space width: 3,000 mm, total width: 2,550 mm, total height: 3,700 mm, Equipment: ABS, * Gooseneck with storage boxes * Trailing axles * Hydraulic loading ramps * Low-bed, extendable ----* Tire dimension: 235/75R17.5 * Technical total weight: 42,000 kg * Tare weight: 8,700 kg * Overall length: 13,150 mm * Next inspection due: 02/2027 ----Vehicle number: 12148----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed.-----We are happy to assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional fee:----Trade-in of your old vehicle, TÜV/inspection approval, complete export processing, assistance with financing, application for export license plates, vehicle transport, vehicle registration, recovery and vehicle transport services. Lsdpfxoz A N Ane Agrsrt ----?YOUR VTS TEAM

Condition: new, maximum load weight: 37,619 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 9,240 mm, loading space width: 2,550 mm, total width: 2,550 mm, total height: 3,570 mm, Year of construction: 2026, Equipment: ABS, Kässbohrer K.SLS 3 / 0N ? 18/30 | Year of Manufacture 2025 | NEW | 40t Ramps | Top Specification Location: Germany Condition: New / Unused Availability: Immediately --- Description For sale is a brand-new Kässbohrer K.SLS 3 / 0N ? 18/30 low-loader, year of manufacture 2025. Perfect for transporting construction machinery, equipment, and heavy goods. Robust chassis, high-quality axles, heavy-duty ramps — ready for immediate use. --- Technical Data Dimensions: - Overall length: 13,190 mm - Platform length: 9,240 mm - Platform height: 875 mm - Overall width: 2,550 mm (+600 mm with side extensions) - Gooseneck length: 3,950 mm - Unladen weight: approx. 10,381 kg Weights: - Permissible gross weight at 80 km/h: 48,000 kg - Permissible gross weight at 60 km/h: 52,800 kg - Total axle load: 30,000 kg - Kingpin load: up to 18,000 kg --- Chassis & Axles: - 3 BPW axles, air suspension, drum brakes - 1 trailing axle at rear - Lift axle (load-dependent + automatic control from the cab) - Tyres: 245/70 R17.5, M+S + 3PMSF - Tyre pressure monitoring R141 - Wabco EBS 4S/3M, ABS + RSS - Wabco Smartboard (axle load, suspension, diagnostics, etc.) --- Ramps & Loading Area: - Foldable 40t access ramps - Ramp length: 2,750 mm - Ramp width: 850 mm - Hydraulic sliding system - 45 mm hardwood floor + chequer plate over wheel arches --- Load Securing: - Multiple 8,000 daN and 13,400 daN lashing points Ljdpfx Asx Efzusgrort - 7×2 stake pockets + plug-in stakes - Container locks for 1×20 ft - 450 mm front wall, side and rear walls made of aluminium --- Body & Chassis: - High-strength S700 MC steel - Partially metallised (Zn/Al 85/15) — strong corrosion protection - Rear angle: 10°, 500 mm - 2" kingpin - Mechanical landing legs at front - 45t supports at rear --- Equipment: - 2× toolboxes - All-round warning beacon - LED lighting - Rear work lights - Wheel chocks - 9×2 extensions (up to +300 mm) - Stake box - Reflective strips on sides & rear --- Colour: RAL 3020 Traffic Red We are happy to provide further information upon request.

Condition: new, overall weight: 48,000 kg, axle configuration: 3 axles, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Reinforced design, air suspension with lift axle, axle load gauge for axle load, length of the upper deck approximately 4,400 mm including slope, length of the lower deck approximately 8,500 mm, loading height approximately 900 mm, for 2-axle and 3-axle semi-trailer tractors, kingpin adjustable, headboard, 16 x stake pockets in the outer frame, 32 x lashing points, ramp approximately 3,100 mm long, ramps with climbing strips on the outside, ramps for driving over on the gooseneck, further options available at an extra charge: last axle as a steering axle, warning signs + lighting and rotating beacon, widening to 3 m with outriggers, -- subject to printing errors, errors and changes, sample images --, more data under: !, More Details: ! Lrodpfx Aoz Dhzlegrst

Condition: new, overall weight: 48,000 kg, axle configuration: 3 axles, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Reinforced design, air-suspended with lift axle, axle load gauge for axle load, high-bed length approximately 4,400 mm including slope, low-bed length approximately 8,500 mm, loading height approximately 900 mm, for 2-axle and 3-axle semi-trailer tractors, adjustable kingpin, front wall, 16 x stake pockets in the outer frame, 32 x lashing points, ramp approximately 3,100 mm long, ramps with climbing strips on the outside, ramps for traversing on the gooseneck, additional options available at an extra cost, last axle as a steering axle, warning signs + lighting and rotating beacon, widening to 3 m with timber, -- errors, omissions and changes excepted, sample images --, more data available at: !, More Details: ! Lrsdpfx Agsz Dhz Sjrjt

Condition: used, empty load weight: 6,140 kg, maximum load weight: 36,860 kg, overall weight: 43,000 kg, axle configuration: 3 axles, first registration: 05/2019, suspension: air, tire size: 235/75R17,5, color: other, gearing type: other, front tire size: 235/75R17,5, rear tire size: 235/75R17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, 8 x container locks, rung pockets, lashing eyes, surcharge for ramps: €1,500, vehicle offered on behalf of the customer, -- subject to printing errors, errors and changes, sample images --, more details under: !, More Details: ! Lodjz Dhw Hjpfx Agrjrt

Condition: new, empty load weight: 7,200 kg, maximum load weight: 31,800 kg, overall weight: 39,000 kg, axle configuration: 3 axles, suspension: air, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Length high bed approx. 4,180 mm, length low bed approx. 9,400 mm, front wall approx. 800 mm high, 14 x stanchion pockets in the outer frame, 8 x stanchions, 3 x cross stanchion rails, 24 x lashing eyes, 4 pairs of container locks, , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Ljdpfx Agsz Dhufsrjrt

Condition: used, empty load weight: 10,860 kg, maximum load weight: 37,140 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 06/2018, suspension: air, tire size: 235/75 R17,5 140J, color: other, gearing type: other, front tire size: 235/75 R17,5 140J, rear tire size: 235/75 R17,5 140J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Rubber surface, two-part ramp with grating, ramps spanning the entire width, electro-hydraulic pump for ramps or connection to the truck's hydraulic system. -- Subject to printing errors, errors and changes. Sample images. -- More details can be found at: !, More Details: ! Ledsz Azmnspfx Agrsrt

Condition: used, maximum load weight: 36,410 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 03/2025, next inspection (TÜV): 08/2027, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. GOOSENECK * Designed in SNT for optimized loading area length * Length approx. 3,700 mm, with a rear slope of approx. 1,000 mm x 10°. For SZM: 4 x 2, 6 x 2, and 6 x 4. * Front panel made of steel, plug-in type, approx. 400 mm high * ASPÖCK-UNIBOX on the connection strip at the front with sockets * 3 kW electro-hydraulic unit for controlling the hydraulic operations, with the exception of hydraulic winches * Without installation of the supply connections on the SZM * Outriggers on the gooseneck with mounting holes for screw-on lashing rings * The first hole is approx. 200 mm from the front, followed by one every approx. 400 mm * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings in the rear area of the gooseneck (LC 10,000 daN) * Approx. 40 mm thick hardwood deck above the gooseneck * 2-inch kingpin * Guide plate on the gooseneck for the turntable, approx. 500 mm wide * 1 pair of recessed bolster pockets on the gooseneck for plug-in bolsters, approx. 100 x 50 mm LOADING AREA * In an extendable design, length approx. 8,800 mm with a slope at the rear of approx. 500 mm x 10°. * A recess in the loading area and extending into the slope for accommodating the excavator arm, approx. 2,490 x 750 x 210/290 mm (L x W x H). * TPMS tire pressure monitoring system according to ECE R 141. * Mechanical landing gear with 2-speed gearbox and crank. JOST Module B * Static test load = approx. 50,000 kg * Continuous hardwood deck, approx. 50 mm thick, on the loading area and interrupted between the axles (this increases the coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the extension tube with a large cross-section. * 1 pair of fixed wheel recesses in front of the axles, open to the cross member of the gooseneck, approx. 700 x 410 mm (W x D) * Wheel recesses with square ladder strips approx. 15 x 15 mm and widening in the lower area - 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), in the loading area between the 1st and 2nd axles. Wheel recesses with square ladder strips approx. 15 x 15 mm and widening in the lower area * Aluminum covers for the wheel recesses in front of the axles and between the 1st and 2nd axles, which can also be used as widening boards (if the vehicle is equipped with extendable wideners) * 1st axle with starting aid BPW axles and suspension * 1st and 2nd axles rigid, 3rd axle steered * 3rd axle with electro-magnetic reverse lock via reverse gear and can be activated manually * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve. * 235/75 R 17.5 3PMSF twin tires. Manufacturer of our choice HYDRAULIC LOADING RAMPS Ljdszz Ei Repfx Agrert * DR-15/60-900-4350-HB-HV-M * A pair of two-piece steel ramps * with a length of approx. 4,350 mm and a width of approx. 900 mm. Hardwood deck * Hydraulically folding ramp tips. Ramps can be individually shifted hydraulically outwards by approx. 235 mm and inwards by approx. 215 mm * Maximum load and angle of inclination according to the technical data sheet: C465497 * In accordance with Regulation 2021/535/EU, ramps with a length of less than 300 mm do not need to be taken into account in the vehicle length of 16,500 mm in the driving position. * Hardwood deck on the slope of the loadin

Condition: used, maximum load weight: 44,050 kg, overall weight: 61,000 kg, axle configuration: 3 axles, first registration: 10/2024, next inspection (TÜV): 10/2026, Equipment: ABS, Excerpt: Equipment Gooseneck * Designed in SNT style to optimize the loading area length * Length approx. 3,750 mm * Gooseneck can be raised, lowered, and extended hydraulically * Technical fifth-wheel load: 34,000 kg. For SZM: 6 x 4 or 8 x 4 (or 6 x 4 with 1-axle dolly 235/75-17.5) Low-bed * Designed as a telescoping kettle bridge with a low overall height * With extension at the front and mechanical locking * Length x Width approx. 7,550 mm x 2,740 mm Rear chassis * With closed outer frame * Diamond plate surface and continuous prism excavator recess approx. 1,450/900 x 505 mm, open at the rear Braking system * WABCO EBS-E, in accordance with EU regulations Axles and suspension * PENDEL-AXLE, all axles hydro-mechanically forced-steered * Hose rupture valve on the axle balancing cylinder with automatic RESET function * Technical axle load: 12,000 kg each * Hydraulic axle equalization Tire equipment * 245/70 R 17.5 3PMSF * Load index 143/141L(146/146F) * Manufacturer of our choice Lrodpfx Agszzudwsret Paint finish: * Trailer color: RAL 3002 Carmine Red Included accessories * Steel front wall, pluggable, approx. 400 mm high * Round NATO socket on the connection strip at the front (Maeler & Kaege VG 96 917) * 3 kW electric-hydraulic unit for controlling the hydraulic operations * With the exception of hydraulic winches, outer support of the gooseneck with mounting holes for screw-in lashing rings * The first hole approx. 200 mm from the front, then approx. every 400 mm * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 lashing ring each on the left and right on the rear bevel of the gooseneck (LC 10,000 daN) * Diamond plate surface above the gooseneck. * 3.5-inch kingpin * Guide plate of the gooseneck for the fifth-wheel plate, approx. 500 mm wide * Hydraulic cross member for supporting the gooseneck on the SZM or a dolly. * 1 pair of steel ramps with climbing strips and mounting bolts for bridging the pick-up hooks of the low-bed * Mounting possibility for the steel ramps at the rear between the outer supports of the gooseneck. * 1 lashing ring each on the left and right on the front cross member (LC 10,000 daN) * 6 pairs of threaded blocks on the outside of the inner supports of the loading area for mounting screw-in rings M24 (LC 8,000 daN). * 2 pairs of screw-in rings M24 (LC 8,000 daN) included. * 6 pairs of recessed lashing rings on the outside of the outer supports of the loading area, foldable inward and outward (LC 10,000 daN). * 1 pair of threaded blocks at the front and rear on the outer supports of the loading area for mounting screw-in rings M24 (LC 8,000 daN). * 1 pair of screw-in rings M24 (LC 8,000 daN) included. * Preparation for mounting screw-on container positioning for 1x 20' or 1x 40' container on the outer supports. Without container locking mechanisms. * Mechanical bolt-tab coupling of the low-bed to the chassis for exchanging the loading area or installing extension supports. * With electro-pneumatic-hydraulic couplings * Suspension rail at the front on the rear chassis for the low-bed for loose support ramps * 4 pairs of lashing rings hanging in the outer frame of the rear chassis (LC 10,000 daN) * 1 pair of lashing rings lying at the front in the excavator recess of the rear chassis (LC 16,000 daN) * 1 pair of lashing rings lying in the excavator recess in the area of the 2nd axle of the rear chassis (LC 16,000 daN) * 1 pair of lashing rings lying at the rear in the excavator recess of the rear chassis (LC 10,00

Condition: new, maximum load weight: 36,500 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and in the short term, on our website. Excerpt from the equipment Complete equipment available upon request GOOSENECK * Designed in SNT to optimize the loading area length * Length approximately 3,700 mm, with a rear slope of approximately 1,000 mm x 6° For SZM: 4 x 2 and 6 x 2 * ASPÖCK-UNIBOX Grid floor with 5 mm sheet metal reinforcement on the gooseneck and the rear slope * 2-inch kingpin * Guide plate from the gooseneck for the fifth wheel plate, approximately 500 mm wide, round * NATO socket on the connection strip at the front on the gooseneck * 1 pair of pluggable aluminum side panels, approximately 400 mm high, in anodized design * 1 LED work light each on the left and right, mounted at the top of the front wall * Controlled via on/off switch (operation of the work lights from the SZM is not possible in this case) LOADING AREA * Length approximately 9,600 mm, with a rear slope of approximately 900 mm x 6° * Loading area after the gooseneck can be hydraulically raised and lowered, length approximately 3,000 mm * Load capacity up to approximately 9,000 kg on the lifting platform and the loading area, continuous grid floor with approximately 5 mm sheet metal underlay as additional reinforcement, designed for point load TIRES * 235/75 R 17.5 3PMSF, twin tires, manufacturer of our choice * TPMS tire pressure monitoring system in accordance with ECE R 141 AXLES * BPW axles and suspension * 1st and 2nd axles rigid * 3rd axle with trailing steering * 3rd axle with electro-magnetic reverse lock, activated via reverse gear and manually * 1st axle with start-assist * Technical axle load: 12,000 kg each AIR SUSPENSION * with raising and lowering valve HYDRAULIC LOADING RAMPS * 1 pair of two-piece AXS steel ramps with grid floor and a length of approximately 4,920 mm and a width of approximately 900 mm * Hydraulically foldable ramp tips, ramps can be individually moved hydraulically outwards by approximately 235 mm and inwards by approximately 365 mm * Flashing lights on the outer sides of the ramp tips, with a switch next to the ramp control * Ramp securing in driving position by means of a quick-release fastener * Painted sand coating on the outer frame of the ramp as well as on the ramp tip * Mechanical supports in drop tube design on the sides of the ramps to support when docking with loading ramps * Control valves for the hydraulic ramps on the right side of the vehicle Lodpfxozzhfus Agrsrt BRAKE SYSTEM * From WABCO EBS-E according to EU regulations SURFACE TREATMENT * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) to ensure the best corrosion protection PAINTING * Semi-trailer carmine red (RAL 3002) * Rims silver gray, side panels aluminum natural * Wheel hubs according to axle manufacturer, lamp sign pure white (RAL 9010) EQUIPMENT * Front wall made of steel, pluggable, approximately 1,600 mm high * Including connection strip for supply lines to the SZM, mounted approximately 1,000 mm from the lower edge of the outer frame profile * Possibility to attach lashing chains on the inside of the front wall on the left and right * Including aluminum tray underneath on the left and right for storing chains or lashing straps behind the front wall, approximately 12 mm thick DELIGNIT surface, screwed on * 2 pairs of screwable lashing rings additionally (LC 5,000 daN) * Electric winch, approximately 5,400 kg pulling force, with

Condition: new, maximum load weight: 92,045 kg, overall weight: 126,000 kg, axle configuration: > 3 axles, Equipment: ABS, Excerpt from the equipment list Complete equipment upon request * 1 x Gooseneck MAX710-Neck-V-30-2.70 * Gooseneck with hydraulic lifting/lowering and extendable function * Length approx. 3,650 mm. For SZM 6x4 or 8x4 * Steel front panel, approx. 400 mm high * Plug-in aluminum side and rear panels on the gooseneck, approx. 400 mm high, in anodized finish * 3.5-inch kingpin * Truck hydraulic connection with flow control (20 l/min) * Incl. gantry for suspending the supply lines * The SZM tank must contain at least 80 l with MAX trailer couplings, otherwise the customer must provide the couplings ex works * BEKA-MAX central lubrication system for a gooseneck with standard grease NLGI-2 * TPMS tire pressure monitoring system * Two toolboxes INOX, approx. 855 x 340 x 390 mm, on the gooseneck, left and right (± 48 kg) * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery * Hydraulic connection lines between the power pack and the connection plate on the gooseneck * Radio remote control: operation of the power pack, start/stop of the diesel engine * Operation of the trailing axle, in addition to the cable remote control * with 2 LED indicator lights on the receiver for single-lane operation * Operation of raising/lowering the gooseneck * Operation of raising/lowering the suspension of the axle assemblies * Multicoupling hydraulic connections on the gooseneck * 1 LED work light, left and right, on the rear panel of the gooseneck, with separate on/off switch * Four warning boards, extendable by ± 2,000 mm, approx. 423 x 423 mm, with an LED position light and a mounting for a rotating beacon. (± 122 kg) * 1 x 3-axle compact front axle * MAX710 axle PA-F-3-19.5-1.36-2.85 * Hook connection at the front and rear * Length: approx. 3,560 mm * Axle width: approx. 2,850 mm * Front axle with a separate air connection for air suspension Ledpozzhfnjfx Agrert * BEKA-MAX central lubrication system for a 3-axle axle assembly with standard grease NLGI-2. * A 7-pole socket, left and right, at the rear of the front axle for the warning boards * TPMS tire pressure monitoring system according to ECE R 1411 * LED work lights, left and right, at the rear of the front axle with a separate on/off switch * Surface of the front axle with a sand-coated paint finish for slip resistance * Multicoupling hydraulic connections on the front axle * 1 x Low loader bridge: MAX710-Low-loader-BB-A-7.15-(430)-2.85 * Telescopic low loader bridge BB-A with drivable bridge hooks at the front and a bolt-on coupling at the rear * Basic width: approx. 2,850 mm Length: approx. 7,150 mm * Beam height: approx. 430 mm Beam width: approx. 1,350 mm * Loading height approx. 580 mm with ground clearance approx. 150 mm * 6 pairs of steel chequered plate with rubber matting approx. 1,000 mm, 1 pair approx. 500 mm (± 1,660 kg) * Possibility to screw in (ø approx. 40 mm) every approx. 500 mm on the outside of the top chord of the outer tube of the low loader bridge for screw rings (LC 16,000 daN) * Possibility to screw in M30 every approx. 1,000 - 1,200 mm on the outside of the inner tube of the low loader bridge for mounting screw rings (LC 10,000 daN) * Folding widening extensions with steel chequered plate, adjustable in width from approx. 2,850 mm to approx. 3,250 mm * TPMS tire pressure monitoring system * Pair of loose HeProLen plastic wheel chocks with climbing strips approx. 1,200 x 450 x 50/400 mm. (± 130 kg) * 2 pairs of screwable lashing rings M30 (LC 12,000 daN). (± 13 kg) * Ce