Used Scrap Grab 0.5 M3 for sale (7,129)

Condition: new, functionality: fully functional, Year of construction: 2025, machine/vehicle number: MHB5202500000156, Scrap Grab for Terex Fuchs, Sennebogen, Liebherr 5 Tinned Model Bdodpexryn Ajfx Afwsg 500 Liters Capacity

Condition: used, 72”x 0.5” x 60,000Lb Braner Turret Type Loop Slitting Line Braner Turret Type Loop Slitting Line is used for coil metal cross cutting with maximum width 72”, maximum 0,5” metal thcikness and 60,000Lb coil capacity Make: Braner Year New: 1996 Material Thickness: .060″ – .500″ Bdedpfxorn Sqhe Afwsg Material Width: 12″ – 72″ Coil Weight: 60,000Lb Line Speed: 120 – 250 feet per minute Coil ID: 20″ – 24″ Coil OD: 75″ Slitting Cap: .500″ / 4 cuts – .125″ / 40 cuts Entry L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Control Panel Mandrel Uncoiler Powered Hold – Down Roll Outboard Bearing Support Hydraulic Feed-Up Drive Water Cooled Brake Hydraulic Peeling Table Driven Entry Pinch Rolls Adjustable Edge Guides Entry Mechanical Crop Shear Two Turret Type Slitting Heads Arbor Diameter: 12″ Powered Arbor Adjustment Powered Head Rotation Motor: 100HP DC Drive Lots of Knives & Tooling Two (2) Scrap Winders Powered Open / Close Heavy Duty Design Looping Pit Cross Over Table Drag Board Tension Stand Material Feeding Table Recoiler Hydraulic Drum Powered Push Off Hydraulic Over-Arm Separator Outboard Bearing Support 300HP DC Motor Drive Exit L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Upgraded Siemens Digital Drives, Electrics, Controls, Knives & Tooling

Condition: used, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 11/2024, next inspection (TÜV): 11/2025, Equipment: ABS, Schmitz Cargobull SKI 24 SL 10.5 Scrap Tipper Bdodpjv Ttx Usfx Afwog * RENTAL * Scrap tipper 55.5 m3 * SCB axles * Portal doors * Air suspension * Air steering * Lift axle * Roll-up tarpaulin * 3 cross braces for stability * Boost pressure gauge * Automatic lowering during tipping * ISO air connections with red and yellow coupling heads * 2 x 7-pin power connectors * 15-pin power connectors * ABS connection * Platform on the front wall * Folding underrun protection * Disc brakes * LED lights Rental possible! Subject to prior sale and errors! Sold exclusively subject to our terms and conditions. Important notice? Important information: Despite careful review of all details in our offer, errors may occur. These errors are sometimes caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal information: This sales advertisement does not constitute an offer within the meaning of Section 145 of the German Civil Code (BGB). Rather, it is information for the purpose of contract initiation. The information provided here is provided without guarantee and therefore does not represent any guaranteed properties.

Condition: used, functionality: fully functional, Dosing hopper with inclined base, equipped with an extraction screw conveyor. Capacity: 3 m3 Dimensions: 2800x1400x2300mm Driven by a high-efficiency ALMO IE3 geared motor (model MH3-100L4, 230/400V, 1445 rpm, manufactured 07/2017). Bsdpfjzxz Iqsx Afwedg Equipped with plexiglass inspection windows. Mounted on a mobile frame with wheels. In good overall condition. Made of painted steel.

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 3,000 W, Description BAISON M3: (3 kW) from stock Europe. table length 3.050 mm table width 1.530 mm laser head Ray-tools autofocus laser capacity in Kw 3 Raycus total power requirement 25-30 kW We can deliver from (1 till max 6 Kw) overall dimensions 4750x2260x2100 mm weight of the machine ca. 4.550 kg Configuration: - Raycus Laser source 3 Kw (opt. other laser power) - Cypcut (full option control) - High integrated, simple operation, leading technology - Ray-tools autofocus cutting head - Nesting, With leapfrog, Edge seeking, Fly cutting - 2x LCD monitor control, keyboard, control panel - central Lubrication system - video camera inside machine Cutting capacities: - normal steel 20 mm - stainless steel 12 mm - aluminum 10 mm - brass 8 mm - copper 8 mm Axes: - Machine axes: 3 axes (X, Y, Z,) - X-axis travel 3050 mm - Y-axis travel 1530 mm - Z-axis travel 100 mm - Axis speed X / Y: 120 m / min - Positioning accuracy: +/- 0.03 mm/m - Repeatability accuracy +/- 0.03 mm – Acceleration max. 1,2 G Table platform 1500mm complete outside for leading: - table load 1000 kg. assisting gases: - mild steel - oxygen (0.5 - 2 bar) - stainless steel - nitrogen (5 - 16 bar) - Aluminium - compressed air or nitrogen (5 - 16 bar)   including: - Complete safety features for CE - Safety relay - Protection grade IP54 - Spare part basic supply package with nozzles and lenses - Professional software for cutting and nesting metal sheets - AC unit for electrical cabinet - Pneumatic table holders clamps for thin metal sheet, anti-vibration system - Automatic door-up and table-out system - Dual temperature water cooling system - Machines for cutting sheets metal - Fiber laser is the green laser technology for the future - (Saving of at least 50% energy costs) - Components / therefore very low-maintenance - Save up to 50% per part through more efficient production - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame, - equipped with world-famous, durable, high-quality components - Light barrier for moving table, safety protection - Complete CE standard Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Bodevcbf Iopfx Afwodg Official Seller CNC Top Ten bv Coevorden, Netherlands

Condition: repair required (used), Year of construction: 1987, machine/vehicle number: 90071000, bale width: 300 mm, bale height: 300 mm, overall weight: 15,000 kg, Currently, the “lateral pressure” is stuck because material (sheet metal) has shifted and become wedged under the side block. Bjdpfey Tlzaox Afwodg

Condition: used, mileage: 359,000 km, power: 375 kW (509.86 HP), first registration: 04/2022, fuel type: diesel, overall weight: 40,000 kg, brakes: retarder, gearing type: automatic, emission class: euro6, Equipment: soot filter, - Retarder, air conditioning, lift, and steering axle – 18m3 Schwarzmüller - Suspension: leaf spring/air suspension Bdsdpfjzwkd Ejx Afwjg

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, machine/vehicle number: 6500034407, degree of automation: automatic, power: 6 kW (8.16 HP), Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, emergency stop, fume extraction, BODOR M3 – fiber laser metal tube cutting machine, MFG 2023; SN: 6500034407 EtherCAT bus control: advanced system in the industry, more accurate control, faster response, and higher processing efficiency. Independently-developed Bodor Thinker system: third generation bus system with excellent performance and greatly reduced system failure. New Bodor style design: international IF design award winner. Classic and iconic design of Bodor products is distinguishable in the market. BodorNest Tube: a variety of nesting methods catered to customers various cutting demands. Independently developed spike-shaped laser cutting head to make cutting easier Function&parameter list Tube size range-Square tube 25 - 356mm, I-beam 10#-22# Option the special jaws, I-beam 100-320mm; Hea profiles 100-320mm Basic parameter (Metal Plate Cutting) Cutting Capacity (MaximumThickness): Carbon Steel 18 mm Basic parameter (Metal Plate Cutting) Cutting Capacity (MaximumThickness): Stainless Steel 18 mm Operation parameter Shortest remaining material - no waste of materials Max. length of machinable tubes 12000mm Maximum tube weight: 800kg Overall sizes: 27430mm×2710mm×3160mm Machine weight: 16000kg Positioning accuracy: 0.06mm/m Repeated positioning accuracy: 0.04mm Max. speed of chuck with no-load 75r/min Max. speed of chuck feed axis 80m/min Max. speed of laser head moving axis 60m/min Max. acceleration of chuck feeding axis 1G Maximum acceleration of laser head moving axis 0.6G Max. speed of Z-axis 60m/min The central wavelength of an optical fiber laser is 1080 nm, or one-tenth the wavelength of a CO2 laser. The processing costs are lowered to a minimum since the output beam has superior quality, a larger power density, and is easier to absorb by metal materials. Optical fibre laser transmitted through the whole machine with simple optical path, stable structure. External optical path is maintenance-free. Nesting software compatible with Tekla Bodor Nest supports direct NC1 files import. Bodor Nest Tube supports Tekla online import. Compatibility: compatible with various versions of Tekla software. One click to split the drawing: automatically split the whole drawing into individual parts. Intelligent drawing recognition: directly detects the material properties, thickness, quantity, etc. Multi-layer display: marking, part outline, part labelling, etc., are displayed in different layers Intelligent matching: automatically matching appropriate cutting process parameters with identified material information. Efficient nesting: Automatic calculation for the optimal nesting solution to maximize plate utilization. Auxiliary loading device Integrated material table, material selection, and loading function. Bdjdpfjy R Etdjx Afwog After placing the raw materials at according workstation, it can complete the cyclic loading of round, square, rectangular pipe, channel steel, and I-beam, which can significantly improve the processing efficiency and reduce labour cost. Fume filter for Laser Cutting Machine Price: 205.700 Euro + VAT, negotiable, ExWorks Arad /Romania Irrtum, Änderungen und Zwischenverkauf vorbehalten / Subject to errors, changes, and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabilă. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana.

Condition: excellent (used), functionality: fully functional, chain width 300mm cutting height 120mm max blades diameter 350mm variable regulated feeder manual regulation of pressure rolls Bdedpfxozxpw Tj Afwog manual regulation of shafts connection 380V

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 11767, The M3 comes with a fully self-cleaning protein filter - uniquely designed to remove all impurities in the brine, preventing the fine needle holes from blocking. This not only ensures an even brine distribution, it also eliminates operator involvement in filter cleaning and maintenance. Needle head:1-90 Strokes per min Transport system: Conveyor belt – plastic (PEHD, Intralox) Transport system (width): 750 mm Bodpfjzb Dvqex Afwjdg

Condition: used, Year of construction: 2009, operating hours: 15,600 h, functionality: fully functional, cutting force: 800 t, total width: 6,400 mm, total length: 18,500 mm, total height: 4,600 mm, overall weight: 153,000 kg, year of last overhaul: 2024, Hydraulic scrap shear Taurus In very good condition. Bjdpfszudwajx Afwodg

Condition: like new (used), Year of construction: 2025, operating hours: 2,000 h, functionality: fully functional, A mobile scrap shear in new condition is for sale. Inspections can be arranged at any time. Bjdpfx Ajzlqgvofwedg

Condition: excellent (used), Year of construction: 2015, operating hours: 16,000 h, functionality: fully functional, machine/vehicle number: 1.5x3m, conveyor belt thickness: 3 mm, coil weight: 20,000 kg, conveyor belt width: 1,500 mm, sheet thickness aluminum (max.): 3 mm, sheet thickness steel (max.): 3 mm, blade shaft diameter: 620 mm, load capacity: 20,000 kg, space requirement height: 3,000 mm, The line is in continuous use on the first shift. Manufacturer: China, plus 2 used straighteners for thick sheets additionally purchased. The line can be tested at any time. Operator training is possible. Bsdpfexf Ucbsx Afwsdg

Condition: new, Year of construction: 2024, functionality: fully functional, cutting force: 630 t, power: 110 kW (149.56 HP), total width: 2,400 mm, total length: 9,400 mm, total height: 3,800 mm, overall weight: 50,000 kg, cutting length (max.): 1,600 mm, type of input current: three-phase, Scrap Shear MS-6300mex (mobile version, with electrical motor) Diesel Generator 250KW is optional Bdjdpfxsr Ihzio Afweg Modell: MS-63000e Cutting Power: 630t Blade length: 1600mm Output size: 500mm Power: 110 KW Capacity: 8-15 t/h Machine Weight: 39 t (+ Dieselgenerator 4t) Hooper size: 3900mm x 2400mm Information: Container Shear is used for economical scrap processing/ easy automatic operation/ energy saving/ cost saving/ no foundation needed. It can cut any kinds of scrap material. Different models for your choice. Machine is not suggested to cut high-carbon steel; axles; wire rope; pig iron; spring steel plate; rail; alloy steel; hub and so on... (these are not good for blades) Function: Scrap is filled into the hopper by means of a grab loader. Due to the horizontal movement of the holder and the scrap’s dead weight, it falls to the bottom of the loading chamber and into the cutting space. After having been compressed on the front wall, the scrap is cut by the horizontally-moving tool-holding side via the blades on the front wall. While the tool-holding slide is moving horizontally, the processed material is pushed out via the blades on the container’s front wall. While returning to the rear position, the loaded scrap moves under its own weight into the shears’ interior. The scrap shear machines are available with different design, depending on the customer requirements. The output size can be choose (only for new order).

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, pressing force: 90 t, bale weight: 700 kg, type of input current: three-phase, total width: 220 mm, total height: 240 mm, overall weight: 23,000 kg, total length: 1,142 mm, filling opening width: 90 mm, filling opening length: 140 mm, bale width: 80 mm, bale length: 1,200 mm, bale height: 110 mm, tank capacity: 1,100 l, year of last overhaul: 2025, Equipment: documentation/manual, Paal Licon 250 SC Channel Baler Originally built for baling non-ferrous scrap, for the last 12 years this machine has been used at a packaging plant. It processed 700–800 tonnes of cardboard per month. Machine specifications: - Length: 11.42 m - Width: 2.20 m - Pressing force: 80 t - Bale/channel dimensions: 110 x 80 cm - Feed opening: 140 x 90 cm - Machine weight: 23 t - Dual high-efficiency cooling system designed for continuous 24-hour operation in a warm workshop environment The machine floor has been overhauled; the main ram/cylinder is just six months old. The knives for trimming excess material have been replaced and upgraded for faster and more efficient operation. In 2025, the hydraulic oil was changed, distribution valves serviced, and all rollers of the main plunger/plate replaced. The pressing ram has also been refurbished. Comes with plenty of spare parts. Equipped with upgraded electronics and control panel from 2018, fully operational and ready for immediate use. Operation via touchscreen display. Comprehensive photographic documentation from the dismantling process is available. Complete technical documentation (DTR) in Polish and electrical schematics included. Testing of the machine is possible on-site. Bdodpfexdnn Iex Afwsg Additionally available: - Roller bale discharge system with conveyors, tipper, weighing system, and bale storage (as shown in the photos), Or optionally: - Tipping elevator for emptying 1100 L or 660 L bins - PAAL KES1750 chain channel conveyor: width 1750 mm, horizontal section 8 m, inclined section 8 m.

Condition: used, functionality: fully functional, power: 30 kW (40.79 HP), input voltage: 380 V, cutting height (max.): 120 mm, cutting width (max.): 300 mm, saw blade diameter: 350 mm, height adjustment type: mechanical, Equipment: saw blade guard, SCM M3 multiblade in good working condition. Very strong and powerful machine, ready to operate. Bdjdpfx Ajy Enxrjfwjg - Feed Track Width, 300mm - Feed Speed, Adjustable - Max Blade Diameter, 350mm - Max Cutting Height, 120mm - Saw Blade Shaft Diameter, 70mm - Weight, approximately 2000 kgs Price 8500€ EXW. One of the most complete and best selling machines of the SCM brand. You can arrange your own transportation or we can assist you.

Condition: used, Year of construction: 1992, operating hours: 10,150 h, This Eder mobile crane, model M 825 B, used in the sawmill, was manufactured in 1992 and has approximately 10,150 operating hours. The crane is equipped with a Hultdins SuperSaw tree grapple, including a saw, which can be used to move and shorten logs. Saw blade: 75 cm. Clamp: 58 cm. Rotor: 16,000 kg. Bsdpfx Afsyzpg Aowjdg If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, cutting force: 650 t, - Machine in very good technical and optical condition, fully refurbished - CAT engine Bdjdpsy Ncqwefx Afwsg - Cutting force: 650 tons - Semi-mobile - Filling bed: 7m

Year of construction: 2024, condition: new, functionality: fully functional, Clamshell Bucket, Hydraulic Grab, Grain Bucket, Bucket Grapple, Clamshell Grapple, Capacity 2 m3 Gross Weight 1700 KG Rotation 360 Degree Bdedopcdd Aopfx Afwsg 1 Year Warranty - Company Mikron Hidrolik

Condition: excellent (used), Year of construction: 2011, operating hours: 2,852 h, functionality: fully functional, For sale is a mobile scrap shear, Akros Henschel. The machine is in very good condition and can be inspected at any time. Bsdpsx N Tw Uefx Afwsdg

Condition: new, Year of construction: 2026, Capacity: 11,000 m³/h Motor power: 11 kW Voltage: 3-phase / 380 V Net/gross weight: 1000 / 1100 kg Dimensions (L x W x H): 3661 x 1160 x 3063 mm Material: Galvanized steel sheet, flowerless, zinc coating: 80 g/m² (both sides) Minimum water flow rate: 40 L/min Minimum required pressure: 1 bar Sound power level: 65 - 75 dB(A) Vacuum: 2800 - 3100 Pa Filtration area: 60 m² Dust container: 618 x 555 x 640 mm (0.22 m²) Safety and ATEX compliance The design has been adapted to work in environments Explosive dust in accordance with ATEX requirements. A robust design and an effective dust extraction system support safe and efficient operation in professional industrial applications. Efficient Sawdust and Dust Removal This vacuum sawdust extractor is designed for the efficient collection of waste generated during the operation of woodworking machines. The system is ideal for extracting sawdust, shavings, and fine dust in workshops and production plants, improving workplace cleanliness and safety. Vacuum Filtration System Bdodpfx Afjzx A Ryjweg The device operates using bag filtration technology using negative pressure generated by a powerful fan. Contaminants are transported into the extractor, where larger fractions fall directly into collection containers, while fine dust is retained on the surface of the filter bags. Automatic Filter Cleaning The system is equipped with a vibration filter cleaning mechanism, which helps maintain high filtration efficiency and stable performance. After the device finishes operating, the cleaning process is automatically activated, reducing dust buildup on the filters and improving user comfort. Universal Application The device is primarily designed for use with woodworking machines and machining lines, where effective removal of light production waste and maintaining appropriate working conditions are essential. Fire Suppression System – Water Sprinkler The extractor is equipped with a fire suppression system with a water sprinkler, permanently connected to the fire protection system via a pipeline maintained under constant water pressure. The sprinkler system must be connected to the fire protection system in accordance with the manufacturer's requirements. Explosion-Resistant Plate The extractor is equipped with an explosion-proof plate, designed to increase work safety in environments with dust explosion hazards. This element allows for controlled release of excess pressure in the event of a sudden increase in pressure within the system, reducing the risk of damage to the device and improving dust extraction system protection.

Condition: good (used), functionality: fully functional, rotational speed (min.): 2,840 rpm, volume flow: 3,240 m³/h, pressing: 10,000 Pa, power: 18 kW (24.47 HP), High pressure centrifugal fan, dust extraction fan, pressure fan, vacuum fan, centrifugal fan, high pressure fan Spellna VRU 15-125-30H3 Condition: used impeller: forward curved steel, direct drive. 700mm Drive motor:18 kW p1:1,2kg/m3 pressure:9500-12000Pa Number of revolutions:2950rpm Bdedpfx Afsticdloweg air transport:3240m3/h Volume output:0.9m³/s Print pt:100 mbar Connection input:Ø 300 mm Connection output:Ø 200mm Dimensions: 1400x1400x960mm Mass: 350

Condition: used, functionality: fully functional, Full Newman M3 Roller Frame Setup - Selling due to business closure 23 X 31 inch frames (60+ frames) - some are meshed, some are just the frames Newman Stretching Table (requires air - small compressor or link up to current air supply) Selection of mesh panels (approx 10) - or can be used with rolls of mesh of your choice 40n tension can be achieved £1,200 + VAT (ONO) Sold as seen, all in good working order Bjdpfxjzb Rgpo Afwodg Mid-Wales - UK Buyer responsible for collection or pallet delivery (2) can be arranged at buyers expense

Condition: excellent (used), Year of construction: 2023, operating hours: 1,500 h, functionality: fully functional, cutting force: 630 t, power: 90 kW (122.37 HP), empty load weight: 36,500 kg, total width: 2,400 mm, total length: 9,500 mm, overall weight: 40,000 kg, cutting length (max.): 1,600 mm, year of last overhaul: 2024, type of input current: three-phase, operating pressure: 220 bar, Scrap shear MS-6300e (scrap shear with electric motor) without operating materials. A 250kW diesel generator can be offered separately. Model: MS-6300e Cutting force: 630t Cutting length: 1600mm Discharge height: 500mm Power: 110 KW Capacity: 12-17 t/h Bodjuu Upgjpfx Afwjdg Machine weight: 40 tons (+ diesel generator 4 tons) Hopper size: 3850mm x 2600mm x 1500mm Information: A scrap shear is used for economical scrap cutting: - simple automatic operation - Energy-saving - Cost-saving - No foundation required Function: Scrap is fed into the loading area with the aid of an excavator. Due to the horizontal filling area and the scrap's own weight, it falls down into the loading chamber and into the cutting area. The scrap is compacted at the front wall and cut by the horizontally moving tool pick-up side via the blades on the front wall. While the tool carrier carriage moves horizontally, the processed material is pushed out via the blades on the front wall of the container. When returning to the rear position, the loaded scrap moves into the interior of the shears under its own weight. The scrap shears are available in different versions depending on customer requirements and the output size can be selected (for new orders). Inspection and trial operation are possible.

Condition: excellent (used), Year of construction: 2016, operating hours: 3,500 h, functionality: fully functional, cutting force: 500 t, total width: 2,600 mm, total length: 13,500 mm, total height: 4,310 mm, overall weight: 50,000 kg, year of last overhaul: 2025, type of input current: three-phase, operating pressure: 300 bar, Lefort 500 mobile unit - No vehicle registration documents/Not street legal - Very well-maintained unit Bdedezum S Tspfx Afwog - Boom length: 5000 mm - Scania Diesel Stage 3 engine - Available approximately April/May 2027