Used Seam Welding Machine for sale (66,516)

Condition: used, Welding edge shaper, edge shaper, edge chamfering machine TRUMPF Chamfering of steel plates for weld seam preparation Lhsdsdz Sq Espfx Akyof Type TKF 103 Sheet thickness: 4 - 25 mm Bevel length max: 10 mm Bevel angle: 30° Power: 2000 watts Mains connection: 220 Volt, 50 Hz - equipped with guide bracket for 30° bevel angle - resharpenable steel for high tool utilization - Set up for 20 mm sheet metal For chamfering straight and curved edges with a radius of at least 40 mm. For chamfering edges on flat and curved workpieces as well as pipes with an internal diameter of at least 80 mm. Weight: 14 kg

Year of construction: 2018, condition: ready for operation (used), Fröhlich SAX 700 corner seam welding machine, welding process: MIG/MAG/WIG, max. weld seam length: 700mm, max. welding angle: 180°, welding speed: 2500mm/min, material thicknesses: 0.8mm-6mm, materials: steel/stainless steel, machine dimensions X/Y/Z: approx. 800mm/1000mm/1800mm. Migatronic Automig 273i welding machine, fuse: 10A, max. power consumption: 9.1kVA, no-load power: 20W, efficiency: 88%, power factor: 0.93, current range: 10A-270A, machine dimensions X/Y/Z: approx. 550mm/250mm/650mm, weight: approx. 30kg. Documentation available. On-site inspection is possible. Lhedpfou Izq Sex Akyjf

Condition: excellent (used), Year of construction: 1975, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, Equipment: type plate available, manufacturer: PECO N30 rated power: 40/80 kVa KB 1970 production can weld in 2 directions rather water cooled, air operated Kb 32 A can weld 500mm in length Lhedpfx Ajxlr Tdjkyjf voltage: 380v 50 Hz

Condition: refurbished (used), DALEX roller seam welding machine, cross seam version Lsdpfsdx Suhjx Akyshf Projection: 350 mm Nominal power: 160 kVA Sec. short circuit current: 38.5 kA Sec. no-load voltage: 4.8-9.6 V Electrode force: 140-2,040 daN with 2-step switch and auxiliary control with thyristor power stage and Synchronous welding control MPS 100 multi SPECIAL NOTE - PLEASE NOTE The above performance data are taken from the machine's rating plate. When the machine was inspected, it was found that a 200 kVA welding transformer was installed by the previous owner. This changes the performance data. .

Condition: used, Year of construction: 2004, Technical details: table diameter: 400 mm table turning speeds: stufenlos U/min tilting range table plate: 90 ° voltage: 230 V / Hz V connected load: 11,8 kVA machine weight approx.: 220 + 173 kg POSITIONER - ROTARY TABLE with welding source Messer Griesheim Application: for circumferential seam welding Welding device: Welding rectifier Messer Griesheim Variomatic 40 for MIG-MAG, direct current; protection class IP 23; cooling type F with remote control Stepless current/drain feed, 4.0 meter hose package Torch head Ground clamp/ground cable Size: L: 1.1 x W: 0.5 x H: 1.3 Weight approx. 279kg Welding turntable MB Milano, TGA 75: swiveling welding turntable up to 90° allows horizontal and vertical welding (direction of rotation left and right) Infinitely variable speed; operation via control panel and/or foot control Lodpou Nkxhsfx Akyehf stands on transport trolley Size: L: 0.8 x W: 0.6 x H: 1.3 Weight approx. 173kg Wire feeder type Eurotrac SLV, feed rate 1.2 - 18 m/min *

Condition: excellent (used), Roller seam welding machine in longitudinal seam design Make DALEX Type PMS 11-4 Nl throat depth: 350 mm Rated power at 50 % duty cycle: 80 kVA Sec. short-circuit current: 23 kA sec. open-circuit voltage: 3.5 - 4.26 V with 2-step switch (high/low range) Electrode force: 80-600 daN with add-on switch cabinet according to VDE 0100 Lhsdpfotxl Ivsx Akysf Main switch Synchronous welding control unit 8036 Weight: 635 kg Example photo Machine is still being refurbished

Condition: like new (used), Year of construction: 2024, functionality: fully functional, input voltage: 400 V, warranty duration: 6 months, type of cooling: water, overall weight: 4,000 kg, working width: 1,000 mm, Schlatter NQD - Cross seam welding machine - Overhauled Lsdpfx Aou Tqhhokyehf We offer here a completely overhauled Schlatter NQD cross seam welding machine. The delivery time of the machine is approx. 4 months. Welding heads: 4 pieces Travel distance: 950mm Welding speed: up to 12 meters / minute The machine is only for sale as reconditioned / as good as new. With kind regards T. Becker

Condition: used, Year of construction: 1971, nominal power at 50% duty cycle: 100 kVA, Manufacturer: Nimak Type: NMP 7/100 Ledew S Exujpfx Akyehf Year of manufacture: 1971 Machine No.: 71059 Rated power: 100 kVA at 50% duty cycle Connected load: 175 kVA Primary voltage: 380V Open-circuit voltage: 7.3V Secondary current dd/max.: 8/33 kA Electrode force: 750 kp Frequency: 50 Hz Up to 8.8 V At 6 bar Please submit inquiries only by email. All information has been provided to the best of our knowledge. Errors excepted. This offer is exclusively aimed at entrepreneurs as defined in § 14 BGB. Sale is made to the exclusion of all warranties. This exclusion does not apply to claims for damages resulting from grossly negligent or intentional breach of duty by the seller, as well as for injury to life, limb, or health. For further information, please visit the website of Witzenmann GmbH under the keywords "Imprint," "Terms and Conditions," and "Data Protection."

Condition: new, Year of construction: 2025, longitudinal and transversal seam welding machine --- Power at 50%: 80kVA Highest welding-current: 35,9kA Electrode force: 100-600daN / double stroke Throat depth: 550mm --- Lodowqmrzepfx Akyjhf Weld control: Filius classic 128 program --- Extra Equipment: - foot pedal - flow monitor - main switch --- Warranty: 6 months --- Spotwelding electrodes + spare parts at stock

Condition: new, Year of construction: 2025, Technical Specifications: Model: KMD20 Operated: Motorized Pressure Input: Up to 6 bar Power: 20KVA Welding Capacity: 1.5+1.5mm mild steel Maximum Force(6 bar): 115daN Input Voltage: 380V/50Hz Protection Fuse: 63A Seam Weld Arm Length: 200mm Cooling: Water cooling (8L/min) Power Input Cable: 3m Protection Class: IP21 Power Level: %0-99 power adjustable by controller Lhodpfetmfzuox Akysf Weld Time: 1-99 Cycle adjustable by controller Dimensions (W/L/H): 450m x 1000mm x 600mm Weight: 203Kg

Condition: good (used), Gas metal arc welding machine, arc welding system, MIG/MAG welding system, pulse welding system -Manufacturer: Ess, MIG/MAG welding machine -Type: Pulsarc 350 -Max. welding power: 350 A -Water-cooled Ledpfx Aksx Hi I Doyshf -Wire feeder case: ESS DVK 400 4-roller drive -Dimensions: 970/670/H1040 mm -Weight: 209 kg

Condition: refurbished (used), Year of construction: 2026, Power at 50%: 16kVA Short circuit-current: 20,7kA Electrode force: 65-390daN / single stroke Throat depth: 200mm --- Weld control: MPS 10 (5-times, 8-program) --- Warranty: 6 months Lhjdoy Ez I Hspfx Akyef --- Spotwelding electrodes + spare parts at stock

Condition: not inspected (used), functionality: unexamined, total height: 1,000 mm, total width: 800 mm, total length: 1,100 mm, overall weight: 150 kg, No reserve price – guaranteed sale to the highest bidder! By placing a bid, you commit to collecting the items within the period from 23/06/2026 to 26/06/2026! Auction of an ELEKTRA BECKUM electrode welding machine & an oxy-fuel welding unit! MACHINE DETAILS Dimensions (L x W x H): 1,100 x 800 x 1,000 mm Weight: 150 kg Lsdpsy D Nqajfx Akyohf Note: The gas cylinders pictured are not included in the scope of delivery. External reference: 17

Condition: used, plate thickness 4,0 mm roll diameter ca. 120 mm throat 450 mm weight of the machine ca. 0,48 t Lhjdpfsy D A Eqex Akyof dimensions of the machine ca. 1,3 x 0,8 x 1,8 mm

Year of construction: 1989, condition: ready for operation (used), Various spot welding machines and a Dalex cooling unit are available. 1) 2x spot welding machine Dalex PL 80-1, rated power (50%): 80kVA, max. welding power: 245kVA, max. short-circuit current: 35kA, primary voltage: 380V, open-circuit voltage: 8.44V, cooling water quantity: 10l/min, electrode force range: 100daN-600daN. 2) Spot welding machine Dalex PMS 10/1, rated power (50%): 32kVA, max. primary short-circuit current: 30kA, primary voltage: 380V, open-circuit voltage: 4.6V, electrode force range: 65daN-390daN. 3) Spot welding machine Dalex SL 16/EA, rated power (50%): 16kVA, connected load: 37kVA, secondary short-circuit current: 17kA, electrode force range: 17daN-278daN, open-circuit voltage: 3.6V, weight: approx. 200kg. 4) 2x spot welding gun Dalex RS 11 and 3136. 5) Water cooling unit Dalex DRF 4, year of manufacture: 1989, refrigerant: R22, filling weight: 3.5kg, volume flow: 1.3m³/h, max. operating overpressure: 26bar, cooling capacity: 4.5kW, weight: approx. 140kg. An on-site inspection is possible. A package sale is preferred. Lodpfxoy Eg Dto Akyehf

Year of construction: 1999, condition: excellent (used), working width: 620 mm, machine/vehicle number: SE 01510 A10, Heating Element Welding Machine HP60/40 by BRANSON The drive is hydraulic, supported by positioning and control systems. The machine is equipped with its own vacuum pump. Only a few operating hours (approx. 6,800 hours). Usable heating element area: width 600 mm x depth 400 mm Max. workpiece dimensions: - Max. width: 620 mm - Max. depth: 420 mm - Max. upper height: 350 mm - Max. lower height: 350 mm (Combinations of part heights possible, depending on contour) - Max. processing temperature for contact method: 400°C The modular frame design allows for easy conversion and retrofitting. Ledsykvdlspfx Akyehf The side doors and the front door in the welding area can be easily opened (for rapid retooling). The automatic safety lift door ensures a high level of operator safety. The temperature control units on the operator panel have actual/target displays. The control device is a Siemens PLC HMI. The machine is controlled by a Siemens PLC (S7-300 controller). Heating elements are equipped with temperature sensors for temperature regulation and serve as safety cut-offs in case of overheating. The pin systems in the tool mounting surfaces ensure reproducible positioning. Advantages of heating element welding technology: - Reliable welding of workpieces with low or varying wall thicknesses. - Low scrap rate due to dimensionally accurate and repeatable welds. - Precise time, temperature, and force control enable welding of sensitive parts. - Virtually all thermoplastics can be welded with this process. - Different thermoplastic types can be joined (compatibility needs to be verified). Technical data of the machine: - Power supply: 3 x 400 V AC + N + PE - Power: 25 kVA - Rated current: 20 A - Required cable cross-section: 5 cables, each 6 mm² - Required pneumatic connection: 6 bar Machine dimensions: - Machine width: approx. 1.22 m - Machine width with operator panel: approx. 1.8 m - Machine depth: approx. 2.1 m - Machine depth with operator panel: approx. 2.6 m - Machine height: approx. 2.4 m - Machine height with raised safety door: approx. 2.85 m (open door) Machine weight: approx. 2.2 t

Condition: used, Year of construction: 2013, machine/vehicle number: 22640M03, For sale: a powerful stationary spot welding machine / resistance welding system from the renowned manufacturer AWL-Techniek. This system is ideally suited for industrial applications, series production, and use in automated production lines and robotic cells. With a high output of 130 kVA, the machine is optimally designed for demanding welding processes in the metal sector. Lhodpfx Akoy Erp Uoyef Technical data: Manufacturer: AWL-Techniek Model: BR453K2B Year of manufacture: 2013 Voltage: 400 V Frequency: 50 Hz Phase: 3P + PEN Current: 250 A Power: 130 kVA Weight: approx. 500 kg Equipment: - Stationary spot welding system - Welding tongs with copper electrodes - Rotary table / workpiece holder - Control unit with operator panel - Pneumatic pressure unit - Industrial-grade (heavy duty) design Applications: - Automotive industry - Metal processing - Series production - Robotic welding / automation lines - Sheet metal processing

Year of construction: 2021, condition: ready for operation (used), A height-adjustable turning device PETec for welding work is available. Rotation function: 360°, max. load capacity: 1000kg, height adjustment range: 500mm-2000mm, column spacing range: 500mm-3000mm. An on-site inspection is possible. Lhjdpfx Aey D Tqwekyjf

Condition: good (used), Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, lowering unit for ultrasonic welding machines, lowering unit - flatbed, lowering column Lsdpjy A Iftefx Akyohf -Manufacturer: Nucleus, Absen column 35 for ultrasonic welding machines -Eco FR361101 -Servo motor: Dunkermotoren GR 42x40, voltage 24 V -Receiver: Shaft Ø 20 x 18 mm see photo -Dimensions: 270/230/H85 mm -Weight: 2.5 kg

Condition: used, throat depth: 420 mm, nominal power at 50% duty cycle: 60 kVA, input voltage: 400 V, type of cooling: water, nominal power (apparent): 14 kVA, Spot welding machine type 8003 TECNA – for welding nuts and sheet metal – completely overhauled and inspected Rated voltage: 400V Lhjdpfxeh N Sd Us Akyef Rated power: 60kVA at 50% duty cycle Short-circuit current: 22kA Welding current: 17.6kA Fuse protection: 125A Throat depth: 420mm Electrode force: 470daN Cylinder with pre-stroke Total stroke: 80mm Double stroke: 60mm Electrode taper MK2 – new electrode holder New 2-stage foot switch according to UVV All pneumatic and water hoses renewed Weight approx. 330kg - TE 180 with digital display of welding current, current rise, etc. - Main switch at control cabinet - Original documentation / operating manual available - Machine inspection with confirmation 02/2026 Demonstration and inspection by appointment, Commissioning and training at customer’s site available for an additional charge The unit is located in Dresden, near A17 A suitable cooling unit is always in stock – available at an additional cost ;-)

Condition: good (used), Spot welding machine, spot welding system, spot welding gun, resistance spot welding machine, lever-operated spot welding machine, roller seam welding machine, projection welding machine -Manufacturer: Dalex, spot and projection welding machine with roller table -Type: PMS 14-4 Lhedpfx Aksy Au Nfjyef -Rated power: 200 kVA -Protrusion: 740 mm -Operation: via foot pedal -Individual components: see photos -Submission/Price: complete -Dimensions: Machine 2120/890/H1680 mm / Table 2730/800H1055 mm -Weight: 966 kg / 70 kg

Condition: good (used), Spot welding machine, spot welding system, spot welding gun, resistance spot welding machine, lever-operated spot welding machine, roller seam welding machine, projection welding machine -Manufacturer: Dalex, spot and projection welding machine with roller table Lsdpoy Au Eyefx Akyjhf -Type: PMS 14-4 -Rated power: 200 kVA -Protrusion: 740 mm -Operation: via foot pedal -Individual components: see photos -Submission/Price: complete -Dimensions: Machine 2120/890/H1680 mm / Table 2730/800H1055 mm -Weight: 966 kg / 70 kg

Condition: like new (used), Year of construction: 2006, functionality: fully functional, Rated power at 50% duty cycle: 20 kVA Max. welding power: 40 kVA Adjustable reach: 280 to 550 mm Electrode stroke: 15 to 85 mm Welding parameters for sheet steel: approx. 4 + 4 mm Electrode force adjustable up to 240 daN Cooling water flow 3 l/min Weight approx. 122 kg Welding controller T 90 Mark II Ljdsy A Hr Sopfx Akyohf Operating instructions and manual available Working stroke triggered by pneumatic foot pedal We have cleaned and inspected the spot welder, the condition is very good, looks like new.

Year of construction: 2010, condition: excellent (used), Used four-head welding machine, year of manufacture 2010, running direction from left to right, maximum welding size = 3,500 x 3,000 mm, gasket presser, WINDOWS control, incl. safety fence and cooling & transport table. Lhodpfx Akey Dtbceyef

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: three-phase, input voltage: 380 V, ground cable length: 4,000 mm, warranty duration: 24 months, type of cooling: water, hose package length: 4,000 mm, welding current at 60% duty cycle: 500 A, welding current at 100% duty cycle: 400 A, welding current (min.): 20 A, welding current (max.): 500 A, Equipment: type plate available, Water-cooled Pulse MIG with Pulse – Double Pulse – XRoot – XStabil – XDeep – XCold. Lodpfey Afyhox Akyehf 24-month warranty Kolarc XM 500 20-500 AMP 380 Volt Digital display 2/4 Step / 4 Roller drive Gas pre flow / Gas post flow Start current / End current Up slope / Down slope Double Pulse Correction / Pulse Frequency Preset programmes / Programme memory Elektrode optie Including: 4-metre UP/DOWN Kolarc welding torch, 4-metre ground cable, gas hose, and 10-metre extension cable. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.