Used Sen Bottle Filler for sale (3,822)

Condition: ready for operation (used), Year of construction: 2011, - 10-head rotary bottle filling machine Psdpfsz Ry Dasx Ai Togu - suitable for liquids such as wine, juices, sauces, beverages, oil, etc. - for bottles and/or jars

Condition: used, Bottle filler for mineral water, manufacturer KHS / SEN, model: VVF-90-KK16-SV16, equipped with 90 filling valves, 16-head crown corker, and 16-head screw capper, capacity: 35,000 bottles/h, for 0.7 l GDB / 0.25 – 0.75 l Gastro / + 0.5 l NRW bottles. Pjdpfx Aeyzhicoi Togu

Condition: used, Year of construction: 1991, Bottle filler, manufacturer SEN, type Combi-RE H2, with 30 filling stations and 6-digit crowner, set up for 0.5 l + 0.33 l NRW Longneck + 0.5 l EURO bottles, running direction: left to right, discharge table, various spare parts, S5 control, incl. operating manual, year of manufacture 1991, already dismantled. Pgjdpoyzhmuefx Ai Tju

Condition: used, functionality: fully functional, Year of construction: 2016, machine/vehicle number: 2016-08-30, total length: 2,100 mm, total width: 1,200 mm, total height: 1,900 mm, overall weight: 2,500 kg, CONGDA 16/16/6 Counter-Pressure Filling Machine – up to 3,500 bottles/hour For sale: a CONGDA 16/16/6 bottle filling machine, manufactured in 2016. The machine underwent a complete overhaul in April 2026, which included replacing bearings, seals, springs, and other wear parts. In addition, the machine has been technically improved in several areas since it was put into operation. During this process, various original components were replaced with high-quality parts from European manufacturers. Technical specifications - Manufacturer: CGET (China) - Year of manufacture: 2016 - Configuration: 16/16/6 (rinsing / filling / capping) - Filling system: Counter-pressure filler - Filling capacity: Up to 3,500 bottles per hour, depending on factors such as carbon dioxide content and temperature - Bottle format: Set for 33 cl Longneck bottles - Weight: Approximately 2,500 kg - Documentation: Technical documentation available Complete overhaul in April 2026 In April 2026, the machine underwent an extensive technical overhaul. During this overhaul, the following parts, among others, were replaced: - Bearings - Seals - Springs - Various other wear parts Additional technical improvements Since it was put into operation, the machine has been further optimized in several areas. Various original components have been replaced with parts from European manufacturers. The most important improvements are: - Replacement of the vacuum pump - Replacement of all sensors - Installation of a digital pressure gauge on the filling bowl - Replacement of various parts of the rinser - Replacement of the capping dies - Various other technical improvements As a result of these modifications, the machine has been technically improved in several key areas compared to its original configuration. Additional items included The machine comes with a comprehensive package of extra parts, including: Pjdpfx Ajz Nlcxei Tjgu - Various chain conveyor parts - Large quantity of spare parts - Extra seals - Springs - Filling tubes - Various other technical parts and wear parts Asking price: €34,900,- excluding VAT Location: Breda More information, photos, and videos are available upon request.

Condition: good (used), Year of construction: 2018, functionality: fully functional, total height: 2,100 mm, total width: 1,100 mm, total length: 1,300 mm, overall weight: 800 kg, REF: MM5446 Borelli Group S.r.L. inline rotary filling machine suitable for filling glass bottles. This is a standard 10-head rotary filler with complete CIP kit for cleaning, including dummy bottles and washing spray system. Also supplied with filler in-feed scroll and bottle handling parts for Bordeaux glass bottles. Technical specification: ✅ Manufacturer - Borelli Group S.r.L ✅ Model - RMC10. ✅ Date of manufacture - 2018. ✅ Speed - up to 1500 bottles/hour (for 750ml bottles). ✅ Throughput - 1300 litres/hour. ✅ Filling system - Pure gravity. ✅ Speed variator - Inverter. ✅ Voltage - 415 V / 50 hz / 3 phase. Pedpjx Dbkcofx Ai Tegu ✅ Pneumatic supply - 3-6 bar. ✅ Power - 4.8 kW. ✅ Weight - 800 kg. ✅ Dimensions - 1300 x 1100 x 2100 mm (L x W x H). ✅ Bottle formats - 750ml glass bottles: clear (Ø74 mm x 302 mm high) and green Burgundy (Ø83 mm x 297 mm high). ✅ Intended use - still (non-sparkling) liquids. Supplied for wine. EU Declaration of Conformity (Machinery Directive 2006/42/EC) and operating manual available.

Condition: used, Set of machines for the production of beverages in 5-liter PET bottles. 1) RIVI 24 carousel filling machine - machine modernized in 2013 - previously used for 1.5 L bottles (24 fillers) - number of filling heads: 12 pcs (for 5 L bottles) - capacity: approx. 1800 bph 5 L 2) ZALKIN 4 PET bottle capper - number of closing heads: 4 pcs - capacity: approx. 2000 bph Used machines, functional at the time of dismantling. Pgodpfx Asu I N Npei Teu Complete original technical documentation. Other offers also include semi-automatic blow molding machines for 5 L PET bottles, compressors and bottle labelers. .

Condition: good (used), Year of construction: 1994, Fillerblock, make Nagema, type: Varifill 40/10K/10PP, for 12.000 bph, with 40 filling valves, with 10-head crown capper and 10-head screw sealer (for MCA 28 caps), with double pre-evac, runs on 0,33 lt Longneck- and 0,5 lt NRW-bottles, direction: left->right, Siemens S5 control, built 1994 L: 4.000 mm, W: 2.700 mm, H: 2.800 mm Pgedpfen D Hm Sjx Ai Teu

Condition: used, functionality: fully functional, A used Holdefleiss bottle filling and capping machine, type 12/3. The machine has been set up for 0.5l Euro and 0.33l long-neck bottles, including HDE. The machine is supplied without a pre-evacuation system and features long-tube filling valves. The filling valves will be newly resealed. Both a leakage test and a pressure test will be performed. Pedpfx Aeyycudji Tjgu

Condition: used, Manufacturer: Krones Model: VK2V 050-113-KK10 Capacity: 19,000 bottles/hour Equipment: Beer in 0.5 l glass bottle Year of manufacture: 1991 Feeding system: Bloc Direction of operation: right to left Pjdpsyzhkyefx Ai Togu Filler: VK2V 050-113 Filler pitch: 113 mm Filling stations: 50 units Execution: Height adjustment of filling bowl, automatic bottle shards rinsing, mechanical filling system, bottle shower, HDE Capper: Crown capper 10-113 Execution: Height adjustment of capper head

Condition: not inspected (used), Year of construction: 1985, PET-Filler, with 112 Filling valves, with 120 mm pitch, with 14-head screw capper make Alcoa für PCO 28 caps, already dismantled ex location for sale. Pedpfx Ajh Nq Tksi Tsgu

Condition: used, Filler, manufacturer: KHS / H+K, type: Delta VVF 90/16, rated output up to 38,000 bph, operated at 24,000 bph, with 90 filling valves, with double pre-evacuation, vacuum pump, high-pressure injection, motorized height adjustment, with CIP caps, residual liquid control before filler infeed, with 16-head crowner including crown cap feeder, running direction: left to right, year of manufacture: 1982, retrofitted with new S7 control system in 2004. Pgodpfjyzhqtox Ai Tju

Condition: used, Year of construction: 1994, Combined bottle filler with labeller ‘Krones Bloc’ Podpsxb Ahwofx Ai Tjgu Additional title: Monobloc arrangement Capacity: 7000 bo/h Power: 38,1 KVA Current: 55 A Voltage: 230/400 V Frequency: 50 Hz Formats: 0.5 litre NRW (belly/neck/back), 0.33 litre Steinie (belly/back), 0.33 litre Longneck (belly/neck/back) Running direction: left -> right Operation / Control: Siemens S 5 Position: free standing Features: Labeller Universella Periphery: miho inspection device

Condition: used, Year of construction: 2006, operating hours: 4,000 h, functionality: fully functional, Used wine bottling line. Complete wine bottling line comprising the following machines, all manufactured in 2006: Psdpfxjy Uiido Ai Togu - Filling monoblock for the used wine bottling line: * AVE brand filler, Model: OCEANIC G 24/24/6 * Filling volume: 0.75L - 2L, with a filling rate of 5000 bottles/hour * AROL type 6-head corking machine * AROL type 3-head PET capping machine - Used capsule applicator: * AVE type, 4 heads, maximum speed 6000 bottles/hour. Formats: 0.75L - 1.5L - Used labeling machine: * AVE type, 3 stations. Formats handled: 0.75L - 2L - Used glass unloader, AVE type * 16 units - Furthermore, the line includes: * Nordson type case erector, case filler, and case closer machines * S.G.E. type palletizer, manufactured in 2002/06 - AVE type 16-track bottle washing machine - Conveyor belt, approximately 60 meters long.

Condition: used, Year of construction: 2007, Overview The filler was built in 2007 by the German company Krones. The machine has been regularly serviced, is still assembled and can be inspected at any time. Technical details Output: 40,000 bph (200 ml) Formats: 200 ml glass bottle 237 ml glass bottle Closure: crown cap Direction of flow: clockwise Inlet/outlet height: 1,150 mm +- 50 mm Filling points: 96 Capping points: 15 Pitch circle diameter: 2,880 mm Pitch: 94 mm Control system: Siemens S7 Energy consumption: 15.17 kW Pjdpfx Ajqqz T Hji Tjgu

Condition: used, Year of construction: 2007, Overview The filler was built in 2007 by the German company Krones. The machine has been regularly serviced, is still assembled and can be inspected at any time. Technical details Output: 40,000 bph (200 ml) Formats: 200 ml glass bottle 237 ml glass bottle Closure: crown cap Running direction: counterclockwise Inlet/outlet height: 1,150 mm +- 50 mm Filling points: 96 Capping points: 15 Pitch circle diameter: 2,880 mm Pitch: 94 mm Control system: Siemens S7 Energy consumption: 15.17 kW Psdpfx Aeqqz Txoi Togu

Condition: used, Year of construction: 2021, Gravimetric short-tube glass bottle filler with 16 filling valvesand crown cork capper. Controlled via Eaton PLC. Additional title: gravity filling and crown cork capping Capacity: 2800 bo/h max. filling volume capacity 2,200 l/h Power: 4,5 kW Voltage: 380 V Frequency: 50 Hz Compressed air: 14,4 Nm³/h, 5 - 6 bar, 8 mm connection Length: 2,30 m Width: 1,42 m Height: 2,50 m Weight: 1800 kg Pgsdpoxbpchofx Ai Tju Formats: Longneck 0,33 l, Vichy 0,33 l, Steinie 0,33 l, Belge 0,75 l - crown corks 26 mm Operation / Control: SPS Eeton Features: 16 filling valves, 1 capping head, beer connection clamp DN32

Condition: used, Bottle filler, make BKM, type: Varifill 40/10K/10PP-100, for 12.000 bph, with 40 filling valves, with 10-head crown Psdpfx Asrxuwkoi Tjgu capper and 10-head screw sealer (for MCA 28 caps), with double pre-evac, runs on 0,33 lt Longneck- and 0,5 lt NRWbottles, direction: left->right.

Condition: used, Year of construction: 1984, with 24 filling valves, frequency-controlled drive. Height adjustment for different bottle sizes. With vacuum supply to the filling vessel by vacuum blower. For filling, the bottles are first lifted via a hydraulically controlled bottle carrier and pressed against the sealing cone on the filling valve. The valve sleeve moves as far as it will go in the valve body, opening the product outlet. The air inside the bottles is discharged through an air tube, creating a vacuum in the bottle equivalent to the vacuum above the product level in the container. The product flows into the bottles by gravity until the fill level reaches the air tube. The bottle is then lowered and the product outlet is closed. Additional title: hot filling Capacity of filling line: 5000 bo/h Number of filling valves: 24 pcs Pgjdpfjw Tmmvjx Ai Tju Length: 1,64 m Width: 1,20 m Height: 2,10 m Formats: Round bottles, diameter 60 - 92 mm, height 100 - 265 mm Running direction: left -> right Features: 24 filling valves from stainless steel, height adjustment, vacuum blower

Condition: used, Year of construction: 1990, Bottle filler for approx. 8000 bottles/h Additional title: Filling and capping machine Pjdew S T H Tepfx Ai Tjgu Capacity approx.: 8000 bottles/h Formats: 0.5 l Euro bottle, 0.33 l longneck bottle, 0.5 l goiter neck bottle Position: free standing Features: 1 pre-evacuation, short tube filling, crown cork capper

Condition: used, Year of construction: 2002, A counter-pressure filler for glass bottles, featuring a total of 40 short-tube filling valves and a capping machine for crown caps. The bottles undergo a double pre-evacuation prior to the filling process. Additional title: Counter-pressure fillers with short-tube filling valves Capacity: 12000 bo/h referring to 0.5 litre bottles Power: 13 kW Current: 18,75 A Voltage: 230 / 400 V Frequency: 50 Hz Machine partitioning: 125 mm Running direction: left -> right Operation / Control: Simatic S7-300 Pedszg I H Aopfx Ai Tsgu Position: in auf Füßen stehendem Edelstahlgehäuse Base construction: Carousel-type machine Features: 40 short-tube filling valves, 10 capping heads for crown corks, protective enclosures with doors, control cabinet

Condition: used, Year of construction: 1984, Glass bottle filler and capper equipped with short-tube filling valves for filling bottles to a specific level (volume filling). The bottles are pre-evacuated (11 kW vacuum pump from GEA Ahlborn). Pedezi Alxopfx Ai Tsgu Additional title: Short-tube filler with pre-evacuation and crown cap sealer Capactity: 44000 bo/h Number of filling valves: 90 pcs. Number of capping heads: 15 pcs. Formats: 0,5 l NRW bottles; crown caps Material: housing and contact surfaces from stainless steel Base construction: caroussel-type filling and capping block Features: filling carousel with 90 short-tube filling valves; crown cap sealer with 15 sealing heads; vacuum pump; bottle and cap rinse; bottle conveyor with drives and format components; protective housing with doors; control cabinet with fittings; control panel with touchscreen

Condition: used, Year of construction: 2020, machine/vehicle number: M305, Used Rotary Filler–Capper Monoblock 24/8 for PET and HDPE Bottles – Overview This second-hand rotary monoblock combines a 24-head volumetric piston filler with an 8-head pick-and-place spindle capper, engineered for PET and HDPE bottles up to 1 L. Designed for industrial packaging environments, it is a robust component for a used bottling line handling non-pressurized products such as detergents and liquid soap. The machine features a painted iron frame, stainless steel panels, and a fully enclosed protective hood with safety devices, offering reliable performance in high-throughput operations. CE marking and complete documentation support integration within beverage production and home & personal care lines where non-isobaric, non-aseptic filling is required. Technical Specifications & Performance Data Configuration: Rotary filler–capper monoblock (24/8) Container materials: PET, HDPE Product types: Liquid detergents, liquid soap (suitable for non-carbonated, non-aseptic applications) Filling technology: Volumetric piston filling No. of filling valves: 24 Nozzle type: Mobile nozzles Max fill volume: up to 1 L Capper: 8-head pick-and-place pneumatic spindle capper Cap type: Plastic screw caps (one cap size currently tooled) Machine rotation: Clockwise Nominal speed: up to 5,000 bottles/hour (depending on product, bottle, and closure) Isobaric: No (non-pressurized filling) Aseptic: No Integrated rinser: Not included Filling Section Bottle infeed screw Central product tank with magnetic float switches 24 pneumatic cylinders, upper plates, lower plates Internal plates with stainless-steel/Viton sealing Opening/closing valves per station Capping Section 8 pneumatic capping heads with spindle screwing system Pick-and-place cap transfer Vibratory cap bowl (one cap size) Cap cup and cap chute (one cap size) Automatic cap elevator Mechanical & Structural Frame: Painted iron External panels: Stainless steel Protective hood: Enclosed with doors and safety devices Advanced Automation & Control Systems Pneumatic control panel for filler and capper actuation Electrical panel with CE-compliant components Wiring diagram included for streamlined commissioning Magnetic level control in product tank for stable filling Production Line Integration Capabilities This monoblock integrates seamlessly into second-hand used bottling line configurations for industrial packaging and beverage production of still, non-pressurized liquids. Its clockwise carousel rotation, bottle infeed screw, and cap-handling system allow straightforward connection with upstream conveyors, depalletizers, blow molding machines, and downstream labellers, inspection systems, and secondary packaging. Pgsdpfx Aieyhb R So Tju Upstream compatibility: Blow molding machine, bottle unscrambler/depalletizer, conveyors Downstream compatibility: Labeller, inspection/quality control, packer/shrink-wrapper, palletizer Changeover scope: Supplied with 1 bottle format and 1 cap format; additional formats can be engineered on request Machine Condition &...

Year of construction: 2026, condition: new, The filler is made of stainless steel (AISI 304). The storage tank is located on top of the filler and can be connected directly to a pasteurizer using the DIN 25 connection. The electrical control unit is mounted on the side for easier operation. The bottle filler and the bag-in-box filler are connected to each other via two separate valves and can be used together or separately. Bag-in-box filler: semi-automatic model IBB 200, with stainless steel induction liter counter. Filling system without gravity. Volumetric pump 1.1 KW with flexible EPDM impeller. Touch screen operation for cycle setting, parameters and cleaning. Vacuum and nitrogen injections are freely adjustable in the cycle. The built-in air compressor ensures continuous operation. Technical data: Bag in Box Electrical requirement: 1.1 220V 50-60 Hz Suitable for: Ø 20 - 25 mm Capacity: 5 L/h 240 pcs. Capacity: 10 L/h 180 pcs. Capacity: 20 L/h 130 pcs. Collection tank capacity: 1500-1800 kg/h Dimensions: 600x820x1600 mm Weight: 120 kg Filling system without gravity Capacity of the collection tank: 45 L Capacity: 670 L/h Psdetpxuvopfx Ai Tegu Dimensions: 580x1800x1500mm Weight: 45 kg Take a look at our website!

Condition: used, Year of construction: 1998, Overview This Krones Sensometic beer filling system was manufactured in 1998 and was previously installed in a high-capacity beverage bottling line. The machine is designed for the isobaric filling of beer and is equipped with 77 filling valves, enabling high-throughput production. The filler is configured as a filling and capping block and includes two capping units: one for screw caps and one for crown cork closures. Both capping systems are equipped with 12 capping heads, and the closure sorting systems are integrated on the machine. With a designed line capacity of approximately 33,000 bottles per hour, the machine is suitable for large-scale returnable glass bottling operations. The system supports a wide range of bottle formats typically used in the beer industry. Technical Data Manufacturer: Krones Series: Sensometic Model: VPVI 77-103 / KK11 / SV11 Machine type: Isobaric beer filling machine with integrated capping systems Year of manufacture: 1998 Filling valves: 77 Capacity: approx. 33,000 bottles per hour Capping systems: - Screw capper – 11 heads - Crown cork capper – 11 heads Closure handling: - Integrated closure sorting systems on the machine Bottle Formats: - 0.25 L Individual bottle – Ø 57.5 × 215 mm - 0.33 L Ale bottle – Ø 61 × 236.5 / 238 mm - 0.33 L Ale bottle – Ø 68.5 × 234.5 mm - 0.5 L Ale bottle – Ø 68.5 × 270 mm - 0.5 L Steinie bottle – Ø 70.5 × 174 mm - 0.5 L Bavaria bottle – Ø 70 × 260 mm - 0.5 L NRW bottle – Ø 67 × 260 mm - 0.5 L Individual bottle – Ø 82 × 295 mm - 0.7 L GDB bottle – Ø 79 × 290 mm - 0.75 L GDB bottle – Ø 79 × 290 mm Pgodpfeytqzwex Ai Teu - 1.0 L GDB bottle (light) – Ø 84 × 305 mm - 1.0 L AMG bottle – Ø 83.7 × 298 mm Condition: Used Availability: On request

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: CDE:D09C236, CORIS /HERMES 9600 Vial Blower & Filler Line, made in France. Consisting: - a bottle pack blowing machine, with 2 formats (60ml and 30ml), - a HERMES 2009 filling machine with 2 drive rings 10 slots, - a cap dispenser, - laminar flow, - spare parts, Podpfx Aijrtnlae Togu - belt conveyor 2200mm x 40mm, sold without peristaltic pump. YOM 2010 EXCELLENT CONDITION