Used Serrmac Next 22E for sale (1,235)

Condition: new, Precision, quiet, and reliable drill press. Built according to strict safety standards. Precision spindle with hardened Morse taper and machined base plate. Electronic speed control included. Pjdpfoir Aihex Ai Tsrc Rotating table + vise, 350 x 250 mm. Drilling capacity in steel: R50 mm, ø 22. Tapping capacity in steel: R50 mm, M14. Spindle taper: CM2. Spindle stroke: 90 mm. Spindle bore diameter: 52 mm. Column diameter: 98 mm. Distance from column to spindle center: 201 mm. PU transmission. Electronic speed control (E). Spindle speed: 270 ÷ 4,200 rpm. Motor power: 0.75 kW / 220 V, single-phase. Dimensions (h x w x d): 1950 x 600 x 680 mm. Weight: 220 kg.

Condition: new, SERRMAC NEXT 25 PGM DRILL PRESS - DOUBLE SPEED THREE PHASE - NEW "CE" - ROTARY TABLE + VICE Drilling on steel: Ø 25 mm Tapping: M16 Column attachment: CM3 Column diameter: 98 mm Spindle stroke: 100 mm Transmission: pulleys (PU) No. of speeds: 12 Predpfjuif Syox Ai Toc No. of revolutions: 164 - 2460 rpm Motor power: 0.75 kW Power supply: 380 V - 3 phases Weight: 185 kg

Year of construction: 2013, operating hours: 7,700 h, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 12090, This is a recycling extruder with side feeding for materials (flakes, pellets, etc.). The system is supplied with a control cabinet and a double vacuum system. The pelletizing system is missing at the end of the screw – it is not included in the scope of supply. The cylinder ends at the flange. The extruder is supplied without a screw. The frequency inverter for the main motor was replaced with a new unit 3 years ago. Podpfxoznz Ezj Ai Torc Installed power approx.: 474 kW Cooling water requirement approx.: 190 l/min Fresh water consumption approx.: 110 l/h Feeding system: • Diameter of the feeding screw: 200 mm • Drive for the feeding screw: 45 kW, frequency-controlled • Hopper capacity net 7 m³/250 ft³, • Gear motor 3 × 3 kW • 2 sight glasses in the hopper • 2 level indicators Extruder: • Diameter of the extruder screw: 145 mm • L/D ratio: 24 • Heating power: 50 kW • Extruder drive unit 280 kW Vacuum 1: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 11 kW • Vacuum capacity: 225 m³/h • Vacuum pressure: 33 mbar Vacuum 2: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 7.5 kW • Vacuum capacity: 190 m³/h • Vacuum pressure: 33 mbar Cylinder: • Cylinder: Bimetal extruder cylinder, • Reinforcement layer 1.8–2.0 mm thick, • Hardness 63–65 HRC Installation conditions: • Voltage: 3 × 400 Volts • Permissible fluctuation max.: +5 % – 5 % • Frequency: 50 Hz Permissible fluctuation max.: +4 % – 4 % • Protective measure: Multiple grounding • Ambient temperature: min. 15 °C, max. 35 °C • Humidity max.: 90 % • Altitude of the installation site: 0 – 1000 m The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price is without packaging.

Condition: good (used), Year of construction: 1999, functionality: fully functional, power: 2.25 kW (3.06 HP), input voltage: 400 V, input current: 6 A, input frequency: 50 Hz, type of input current: AC, tool diameter: 40 mm, spindle mount: MK 4, drilling depth: 130 mm, actuation type: manual, rotational speed (max.): 2,380 rpm, rotational speed (min.): 65 rpm, total width: 685 mm, total length: 1,030 mm, total height: 1,900 mm, throat depth: 300 mm, table width: 600 mm, table length: 460 mm, overall weight: 410 kg, Equipment: documentation/manual, rotational speed infinitely variable, Column drilling machine SerrMac TCO 40L - Year of manufacture: 1999 - Good condition considering its age - Work table: 600 (width) x 460 (depth) mm - Motor: 2.25 kW - Spindle speed: 65 – 2,380 rpm – 2 speeds via gearbox, infinitely variable within each speed - Mechanical drill drive with feed rate adjustment possible - Thread cutting device - LED table lighting (retrofitted) - Sturdy machine with a robust column - Weight: 410 kg - Fully functional - Tool holder, clamping devices, and a vise can be purchased separately, depending on the pricing - Machine can be inspected while powered on This offer is non-binding. Subject to prior sale. No online sales. Prsdpfxsz Ailro Ai Tec Sale is only to commercial customers after inspection and acceptance on-site. Due to the age of the machine, the sale is made without any warranty. Pickup only (EXW) - no shipping.

Condition: used, Year of construction: 1990, Electromagnetic feed in 3 speeds Tool holder: MK 3 2 engine speeds Hub Pinole 135 mm Overhang 300 mm Predpfe Aa Aa Ijx Ai Tjc Ø Steel 32 mm Max. Table length 600 mm Table width 345 mm 500 kg

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 585 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 145 mm, spindle speed (max.): 2,340 rpm, spindle speed (min.): 32 rpm, spindle mount: MK 0, throat depth: 293 mm, quill diameter: 72 mm, quill stroke: 145 mm, total length: 1,340 mm, total height: 2,050 mm, table width: 225 mm, total width: 1,280 mm, table length: 800 mm, drilling capacity: 40 mm, spindle nose: ISO40, spindle diameter: 72 mm, nominal power: 3 kW (4.08 HP), Milling-/Drilling Machine, DRO, drilling capacity Ø 40 mm, motor 2,2/3,0 KW, table size 800x225 mm, spindle speed 32-3240 rpm stepless, ISO40, pneum. tollclamping el. tapping device, table stroke X/Y 585/240 mm, automatic spindle feed, coolant device, dimensions 1340x1280x2050 mm, weight ca. 780 kg Prsdpfxsz Rqfzo Ai Tjc

Condition: good (used), Year of construction: 2021, functionality: fully functional, Column drilling machine Serrmac R45 E/TR, year of manufacture 2021, drilling up to 45 mm diameter and threading up to M26 mm, continuous drilling capacity in R 50 ø 45 mm, thread cutting capacity in R 50 M 26, spindle taper MK 4, spindle stroke 145 mm, quill diameter 72 mm, table surface TR - base plate 600 x 460 mm, column diameter 164 mm, total height 1,986 mm, total width 675 mm, total depth 1,100 mm, weight 610 kg, spindle speeds equipped with inverter, motor power 3 kW, coolant and chip tray. Psdeyh Dhwspfx Ai Torc

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, type of input current: three-phase, total length: 1,300 mm, total height: 2,000 mm, table width: 255 mm, input voltage: 400 V, total width: 1,350 mm, table length: 800 mm, drilling capacity: 40 mm, Equipment: documentation/manual, SERRMAC TCS 40 TC VR DA Drilling and Milling Machine Square column and prismatic guides. Prsdszkkm Hjpfx Ai Tsc Complete with: Automatic feed. Variable speed with delay. Lubrication system. Motorized rapid vertical feed for cross slide table. Vise. Drilling capacity in steel: 40 mm diameter. CM 4 spindle connection. Spindle stroke: 145 mm. Cross slide table: 800 x 255 mm. Variable speed with delay: 64-2350 rpm. Motor power: 2.2 kW. Power supply: Three-phase, 400 V. Weight: 780 kg.

Condition: used, functionality: fully functional, Used TAPER TAP MACHINE, FAMUP (SERRMAC) MDR16. TAPER TAP MACHINE, SERRMAC WITH PEDESTAL COOLING SYSTEM AND TANK, USED. Prjdpfx Aiszht Izs Tjc

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, For businesses facing the next stage in their growth journey, there is now a unique opportunity to invest in a used AutoStore system with 15,600 bins and a total of 46 Red-Line robots. This comprehensive AutoStore system, integrated by Swisslog, combines high capacity, scalability, and proven performance in a package that rarely becomes available on the market. The system was installed in 2021 and is located in the USA, making it particularly suitable for companies with high order volumes, growth ambitions, or a need to consolidate warehouse flows. System Overview Grid: Double-Double Dimensions: approx. 24.1 x 24.8 m Height: approx. 5.5 m Number of bins: approx. 15,600 Bin size: 600 x 400 x 330 mm Robots & Capacity 46 RedLine robots 39 charging stations Ports & Flow 3 Relay Ports 8 Conveyor Ports Costs for dismantling/assembly and integration are additional. We can assist in finding suitable integration partners among the various options available on the market. Contact us for a full specification and any other questions you may have. Predpszc Hblefx Ai Toc

Year of construction: 2000, condition: used, Year of manufacture: Dec 2000 Pedpfx Aisx Ahkaj Tjrc New: No Serial number: 385/65 R 22.5 NETTE TRAILER TIRES.

Condition: used, Year of construction: 1995, machine/vehicle number: 953003, Order No. 25072 Technical Specifications: - Drilling capacity in steel ST 60: 40 mm - Drill spindle mount: MT 4 - Drill spindle stroke: 150 mm - Drill spindle speed: infinitely variable rpm - Throat depth: 350 mm - Max. distance between drill spindle and table: 580 mm - Table with 2 T-slots: 600 x 450 mm Pjdpfxov Uy Nps Ai Torc - Height adjustable via gear rack and hand crank - Table tiltable left and right - Drive: 400 V / 3 kW - Space required: approx. W 700 x H 1950 x D 950 mm - Weight: approx. 650 kg - With: - Machine vise - Keyless drill chuck: 1-13 mm - Lighting

Operating hours: 9,926 h, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS General Manufacturer: Linde Type: H25D-02 EVO Year of manufacture: 2015 Operating hours: 9,926 h Drive type: Diesel Lifting equipment Mast type: Triplex mast Full free lift: available Lifting height: 4,723 mm Fork length: 1,200 mm Load capacity: 2,500 kg Side shifter: available 3rd hydraulic valve: available MACHINE DETAILS Dimensions and weight Length: 3,800 mm Width: 1,200 mm Height: 2,154 mm Own weight: 3,770 kg Maintenance and inspection Next service due in: 734 h UVV (German Industrial Safety Regulation) valid until: EQUIPMENT Semi-cabin Windshield wiper LED work light (front) Blue Safety Light (rear) Comfort seat with lumbar support Seat heating Side shifter 3rd hydraulic valve Triplex mast with full free lift All dimensions are rounded figures. No guarantee is given for typing or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is done at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. In the event of delayed collection, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 91 Pjdpjz R Duisfx Ai Torc

Condition: excellent (used), For sale: a Lenze geared motor with a worm gear. The unit is 100% functional, tested, and ready for operation. The technical condition is very good, with only normal signs of wear and tear resulting from use. It is ideally suited for driving conveyors, feeders, industrial machines, mixers, and other devices requiring a reliable drive with high torque. Technical specifications: Manufacturer: Lenze Motor type: DERA 071-22E Gearbox type: GSN04-1NHAR Power: 0.37 kW (50 Hz) Power supply: 3×230/400 V Frequency: 50 Hz Motor speed: 1400 rpm Output speed: 140 rpm Gear ratio: i = 10 Torque: 22 Nm Protection class: IP55 Insulation class: F Manufacturer: Lenze, Austria Prjdpfxsz Sninj Ai Toc Condition: 100% functional – tested. Normal signs of use. Sold exactly as shown in the photos.

Condition: good (used), Code: 0462 Brand: SERRMAC Model: V 22 - CE Standard Pillar drill with swivel table for machine shops, workshops, carpentry shops, and other applications - CE Standard Technical data: Sturdy construction Drilling capacity in steel diameter 22 mm Spindle taper cm2 Spindle stroke 90 mm Column diameter 98 mm Distance from column to spindle center 201 mm Prsdpfszp Exzox Ai Toc Table 350 x 250 mm Spindle speed 255/380/420/560/630/660/950/990/1090/2380/2590/3850 rpm Motor power 0,55 Kw Overall dimensions mm 400 x 750 x 1700 h Weight kg 170

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, TECHNICAL DETAILS Process Flow Continuous feeding of copper wire via an automatic double unwinder with flying splice capability Inductive wire preheating for moisture removal and improved adhesion Full insulation using a Rosendahl Automotive main extruder and a highly precise crosshead die Cooling and extraction Multi-stage, temperature-controlled telescopic water cooling trough for stress-free solidification of the plastic Synchronized precision caterpillar puller for consistent line speed Quality assurance and winding Laser diameter and ovality measurement Eccentricity measurement for monitoring consistent wall thickness Prjdsz N A Npepfx Ai Tjc High-voltage spark tester for real-time fault detection Uninterrupted winding onto process drums MACHINE DETAILS Machine type: High-speed full insulation line Design: Fully automatic system for thin-walled vehicle lines Year of manufacture: 2020 EQUIPMENT Automatic double unwinder with flying splice capability Inductive wire preheating Rosendahl Automotive main extruder Highly precise crosshead die Temperature-controlled telescopic water cooling trough Precision caterpillar puller Laser diameter and ovality measurement Eccentricity measurement High-voltage spark tester Automatic double spool winder

Condition: excellent (used), operating hours: 8,064 h, Brand : LAGUN Model : GBM-22E Type : CNC 5 EJES Cnc :HEINDENHAIN 530 Table dimensions : 2.200 x 1000 mm Number and width of T slot: 7 x 22 mm Distance between T slots: 140 mm Axis travels (X,Y,Z) : 2.000 x 1.200 x 1.000 mm Head type : Automático Spindle speed : 4.000 rpm Taper : ISO 50 DIN 2080 Main motor : 28 kw Continuusly variable speeds : 50➗ 4.000 Speed range : 2 Rapid traverse : 10.000 mm/min Machine weight : 15 tn Electronic hand-wheel : Yes Working hours : Machine running: 22.924 h Control on : 23.132 h Prsdpfxoyg R Abs Ai Toc Automatic cycle: 8.064 h

Operating hours: 4,538 h, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,600 kg Lifting height: 2,844 mm Fork length: 1,150 mm Operating hours: 4,538 h MACHINE DETAILS Pedpfx Aioz R D Ehe Tjrc Year of manufacture: 2019 Manufacturer: Linde Type: L16i Own weight: 1,300 kg Overall length: 2,200 mm Overall width: 800 mm Overall height: 1,915 mm Battery voltage: 24 V Battery capacity: 375 Ah Battery year of manufacture: Week 35/2019 Battery voltage in idle state: 24.8 V EQUIPMENT Initial lift Integrated scale Battery charger Previously a Linde full-service unit All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receiving payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 316

Condition: used, This listing is for Genomix GCG-SR-1 10X Next Gen Single Cell Controllor The unit is in full working condition and ready for immediate use This advanced single cell controller provides precise fluidic control for high-throughput genomic sequencing and analysis workflows Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Prsdpfx Aijzghrls Tsc Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.

Condition: used, Separation wall 2000 x 2200 with 3 levels of filtration, filtration area 2000 x 1000. Working area 1 meter deep with recessed lighting IP65, and a table for storage. Fan NEXT 211 1.1 kW ATEX explosion-proof, max 4500 m3/h mounted on top of the wall. Starter start/stop, and duct connection unit with shock absorber to the outside. Stand is good. Can be viewed in Vilnius. Prsdpfjvuqg Sex Ai Tsc If you have more questions, we will be happy to answer.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: Zsk 119 mc+, type of input current: three-phase, total length: 11,000 mm, year of last overhaul: 2024, total width: 1,500 mm, total height: 1,500 mm, overall weight: 18,000 kg, Coperion extruder, 1200 hp (930 kW), 380 volts, 50 Hz. Designed for high-moisture extrusion (TVP or HMMA, high-moisture meat analogue), with an output of 1 to 10 tons/hour. Screw diameter: 2 x 118 mm; ABB inverter for the 1200 hp motor; liquid dosing system; solid dosing system; control panel. Pedpfx Aiszti Tks Tsrc Also available: Urchel cutting device and rotary IQF freezer. This extruder can also be used for dry or wet pet food. This equipment has very few operating hours.

Condition: excellent (used), Year of construction: 2018, Bar loader for multi-spindle lathe 6 spindles last mounted on Gildemeister AS 16 / AS 20 Ø pitch circle 180 mm Guide channels 9/ 11/ 13/ 15/ 17/ 19/ 21 mm Predpfx Aep Du Alji Tjc

Year of construction: 2000, condition: used, Like-new precision drill press, Speed adjustable via continuously variable Vario belt drive with 2 motor stages, Speed range, stage I: 275 rpm to 1800 rpm Speed range, stage II: 550 rpm to 3600 rpm Quill stroke: 90 mm Quill diameter: 52 mm Column diameter: 98 mm Overhang: 190 mm Spindle taper: MK 2 Table surface: 350 mm x 350 mm Table fixed, drill head height-adjustable via rack and pinion (approx. 360 mm) Table working height: 960 mm Dimensions: max. 2150 mm x 750 mm x 750 mm with table Accessories / Special equipment: Chip guard with electrical shut-off, Fine-adjustable depth stop, Prodpfect I H Aex Ai Tjc Halogen work light, machine documentation

Condition: used, Year of construction: 2008, Overview This rotary capping machine (ROPP / roll-on closures) was manufactured in 2008 by AROL Closure Systems. The machine is designed for the application of roll-on closures in beverage and liquid packaging lines, particularly for 28 × 1.5 aluminum closures. It is currently mounted on a pallet and in stored condition. The machine is described as used, with 12 capping heads in very good condition. Visible surface oxidation on the frame is present due to storage but does not affect functionality. The control cabinet is partially open/incomplete with missing HMI.  Prodpsy I Nt Nsfx Ai Tsc Technical data - Formats: 28 × 1.5 closures - Application: Capping of bottles (roll-on closures) - Configuration: Rotary turret with 12 capping heads - Neck finish: 28 × 1.5

Condition: used, gearing type: automatic, lifting height: 4,000 mm, Year of construction: 2022, operating hours: 131 h, YEAR OF MANUFACTURE: 2022 OPERATING HOURS: only 131h! JCB TELETRUK TLT35-22E - Fully electric industrial telescopic forklift Lifting height: 4.00 m Lifting capacity: 3,500 kg - Immediately available & directly from the JCB dealer! - CommandPlus operator cab with heating, air-suspended and heated driver's seat - Joystick control / single-lever control as on wheel loaders / telehandlers - Load moment indicator with overload cut-off according to EN15000 - LED lighting front and rear - 1x battery charger - 1x additional hydraulic circuit (side shifter) - Reverse alarm "white noise" - BlueSpot (visual warning device) - Pneumatic tires: Front 27x10x12 & Rear 21x8-9 - Radio - LiveLink telemetry system hardware incl. remaining license - 1x hydraulic quick coupler - 1x pallet fork FEM3A with fork tines 1,200 mm - 1x integrated side shifter - 1x hydraulic quick coupler - We are a JCB authorized dealer (main dealer) We expressly request you arrange an appointment before your visit. Please contact Mihm Sebastian (tel.: ...) Need transport? We cooperate with various forwarding companies. Unless otherwise stated: sale of used vehicles is carried out with exclusion of any guarantee or warranty. Prsdjzbgncopfx Ai Tsc We are an authorized Mercedes Benz service partner, JCB dealer, IVECO dealer and MAGNI dealer. Always over 700 trucks / commercial vehicles, used & new construction machinery, aerial platforms, forklifts, telehandlers and more! This offer is non-binding. Errors and prior sale excepted. Power steering, cab = More information = Engine brand: Electric Lifting capacity: 3,500 kg Contact Tobias Ebert for more information.