Used Sharpening Machine Weinig Rondamat 929 for sale (65,926)

Condition: used, Weinig Rondamat 929 knife grinding machine for the manufacture of profiled knives. Iiedpfxezrx Hqj Abmsf Production from a straight blank or regrinding of used knives using a template. Technical data: - Maximum grinding wheel diameter: 225 mm - Maximum tool diameter: 300 mm - Minimum tool diameter: 80 mm - Maximum tool width: 230 mm

Condition: as good as new (ex-display), Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! CAN SHARPEN MAX 406MM DIAMETER CUTTERS !!! The G-716 Semi-automatic Cutterhead Grinder is used to sharpen 178mm to 406mm diameter eased edge, milled to pattern, and fingerjoint cutterheads. Worktable traversing is automatic and has adjustable stops. Cutterhead indexing is manual. Each knife is held against a positive stop while being ground !!! No Index Plate To Change No index plate to change when working with heads with different numbers of knives. The use of an index plate assumes that the knives and head separations are uniform throughout, which is often not the case. If the height of the knife is high or low, then the front face of the knife will vary from knife to knife making the task of grinding difficult. The one constant is the back face of the knife, therefore the use of an indexing stop against the back face will provide for accurate indexing regardless of the irregularities in the knives and head slots. Head Indexing and Wheel Feed: Manual Minimum / Maximum Diameter Cutterhead: 7″ Min./16″Max. 178mm Min./ 406mm Max. Worktable Feed: Air / Oil Travel (maximum): 12″ 305mm. Adjustable Limits: Proximity Switch Speed: Fully Adjustable Index Method: Manual index after each knife is ground. Iijdpfx Asq Dzi Tjbmof Grinding Spindle: 1-1/2 HP Wash Down Duty TEFC Motor 3600 RPM, Dual ABEC 7 Precision Bearings, with Sealed Lubrication. 8″ (203mm)Diameter Grinding Wheel (9″ 229mm Diameter Max.) Coolant System: 15 Gallon Tank with Casters, Sediment Tray Full View Sight Glass, 5 GPM Pump (120VAC) Wash Down Hose Included Specifications Grinds 7″ to 16″ diameter eased edge, milled to pattern, and finger joint heads Automatic traversing worktable with adjustable travel limits Manual indexing of knives against a positive stop with grinding position pneumatic brake allowing precision indexing without the need of an index plate High precision 1-1/2 HP grinding spindle with sealed lubrication Recirculating adjustable flow flooded coolant system with wash down hose Fully enclosed grinding chamber with viewing windows and task light Grinding wheel feed allows unattended operation. New Proscale.

Condition: used, Sharpening machine for circular saws/rip saws IDL000829 Iodpfx Abjvlczvjmoif - manufacturer: IMW

Condition: new, Year of construction: 2024, functionality: fully functional, This powerful machine to meet the requirements of larger woodworking companies, ensuring exceptional sharpening results. Equipped with an electronic tooth counter and an autonomous cooling system. The ZM150 offers precise sharpening while maintainingoptimal operating conditions. With two electric motors, including a 150mm CBNdisk for sharpening and a motor reduction group for precise blade movement,this sharpener delivers outstanding performance. Power supply voltage - 380-400V Iedpfx Aexiv Ugjbmjif Frequency - 50Hz Power - 0.20kVa Capacity - 65 teeth per min Blade width - 20 to 100 mm Tooth pitch - 6 -25mm Sharpening disc - Profiled 150mm CBN disc Weight - 115kg

Condition: new, Year of construction: 2025, The ZM101 is a pioneering product in our lineup, designed to sharpen sawblades with widths of up to 100 mm at a remarkable rate of 65 teeth per minute. This efficiency enables it to simultaneously service 3-4 bandsaw/sawmill machines. Equipped with an abrasive ceramic disk, the ZM101 can expertly sharpen all teeth with profiles. Its robust construction allows it to perform reliably under the most demanding conditions, making it a favorite among our customers. Additionally, its straightforward design ensures ease of use and low maintenance costs, further enhancing its appeal. Iiedpfexlfwpsx Abmsf Technical characteristics: Maximum length of the blade: 6000 (8000) mm Minimum width of the blade: 20 mm Maximum width of the blade: 100 mm Maximum height of the tooth: 12 mm Front angle of the tooth: 0÷25° Tooth pitch: Profile N: 10, 12.5, 15, 20, 25 mm Profile WM: 22, 25 mm Working capacity: 65 teeth/min Size of the abrasive disc: Cut-in sharpening, profile N: ø200 x 10 x ø32, ø200 x 13 x ø32 mm Profile sharpening, profile WM: ø200 x 8 x ø32, ø200 x 10 x ø32 mm Voltage: 380 V Power of the electric motors: 0.09 and 0.37 kW Size: Without band saw holder (L x W x H): 750 x 550 x 1100 mm With band saw holder (L x W x H): 2000 (3000) x 1000 x 1100 mm

Condition: new, Year of construction: 2025, The ZM101 is a pioneering product in our lineup, designed to sharpen sawblades with widths of up to 100 mm at a remarkable rate of 65 teeth per minute. This efficiency enables it to simultaneously service 3-4 bandsaw/sawmill machines. Equipped with an abrasive ceramic disk, the ZM101 can expertly sharpen all teeth with profiles. Its robust construction allows it to perform reliably under the most demanding conditions, making it a favorite among our customers. Additionally, its straightforward design ensures ease of use and low maintenance costs, further enhancing its appeal. Ijdoxliguspfx Abmjif Technical characteristics: Maximum length of the blade: 6000 (8000) mm Minimum width of the blade: 20 mm Maximum width of the blade: 100 mm Maximum height of the tooth: 12 mm Front angle of the tooth: 0÷25° Tooth pitch: Profile N: 10, 12.5, 15, 20, 25 mm Profile WM: 22, 25 mm Working capacity: 65 teeth/min Size of the abrasive disc: Cut-in sharpening, profile N: ø200 x 10 x ø32, ø200 x 13 x ø32 mm Profile sharpening, profile WM: ø200 x 8 x ø32, ø200 x 10 x ø32 mm Voltage: 380 V Power of the electric motors: 0.09 and 0.37 kW Size: Without band saw holder (L x W x H): 750 x 550 x 1100 mm With band saw holder (L x W x H): 2000 (3000) x 1000 x 1100 mm

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 108076, grinding wheel diameter: 40 mm, overall weight: 550 kg, Used Weinig Rondamat 960 Includes various grinding discs Shaft diameter 40mm Iodsztzrxjpfx Abmjif

Condition: used, Year of construction: 1998, total height: 1,500 mm, total length: 1,200 mm, total width: 110 mm, Colour: Cream Empty weight: 750 kg Price: On request - Year: 1998 - Documentation available: No - CE marking present: Yes Iodpfxezry Ivj Abmoif - CE certificate present: No - Serial number: 84915 - Control: Conventional - Transport dimensions: 1200mm x 110mm x 1500mm (l x w x h) - Transport weight [kg]: 750kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), functionality: fully functional, type of input current: three-phase, grinding width: 240 mm, Knife grinding machine WEINIG Rondamat 168 Max. tool diameter 3500mm Disk diameter 150mm Tool length 240 mm Main cutting edges up to 25° Iiodpfx Aoufcnqobmjf Motor 1, 1 kW

Condition: used, New decorative film (manufactured in 2019) Iijdpfszrxnhsx Abmef Control panel 23 001 0078 Ident No. 10017781 / 912053002 Used original circuit board, cleaned and tested Used original aluminium support plate Cables available on request

Condition: used, Year of construction: 2004, total height: 1,600 mm, total length: 1,250 mm, total width: 1,400 mm, Colour: Grey Empty weight: 900 kg Price: On request - Details: - └ Description: Bad bearings - Year: 2004 Iedpoyr Rnzofx Abmeif - Documentation available: No - CE certificate present: No - Serial number: 102850 - Motor power: 1.0kW - Transport dimensions: 1250mm x 1400mm x 1600mm (l x w x h) - Transport weight [kg]: 900kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2001, For inquiries: Zoltán Utasi Plus 36 30 205 7380 Grinding of planer knives (conventional and hydro tools, as well as profile knives – profile knives ground based on templates) Machining length: 240 mm Tool diameter: 100–230 mm Grinding wheel diameter: 150–225 mm Grinding wheel width: 2–3–4–10 mm Relief angle: 15–35° Side angle: 0–10° Coolant tank: 50 L Total electrical power: 2 kW Spindle diameter: D40 and D50 mm Iodpjy Nmuyefx Abmsif Infinitely variable speed control for grinding wheel: 1000–3000 rpm Accuracy: within 0.005 mm Motorized lateral feed Liquid-cooled system Equipped with profile copying unit Accessories included (grease pump, knife holder, grinding wheel, dressing tool with tracing pin, template holder) This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.

Condition: excellent (used), Year of construction: 2004, Weinig Rondamat 960 Powerlock (Automatic straight knife grinder and profile grinder) Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! Specification as follows Weinig Rondamat 960 Powerlock / HSK profile grinder. High pecision knife grinder for sharpening straight knives and profiling using a template. Sharpening straight knives in the cutter block. Iijdew Np Uuepfx Abmof Manual grinding machine for profile and straight grinding. Grinding wheel diameter min./max.: 150 mm / 225 mm Grinding wheel width: Ceramic 5 mm, Borazone 10 mm Grinding wheel bore: 60 mm Tooling circle min./max.: 100 mm / 300 mm Tool width max.: 240 mm Grinding wheel drive: 1,1 kW Spindle rpm: 1700 / 2000 / 2400 / 3000 U/min Free angle: Radial: (at the back) 10 - 30 degrees, Axial: 0 - 20 degrees For swivel heads up to 60 degrees Coolant tank approx. 50 litres Table feed 0 - 240 mm Electrical connection approx. 2 kW Pneumatic connection value 5 bar Operating voltage 380 V / 50 Hz Full documentation. POWER LOCK SYSTEM option For grinding powerlock tools. Tool holder with manual HSK quick clamping system. Radial table clamping with fine adjustment Max tool width 240mm Max COMFORT PACKAGE option Variable grinding wheel speed 1500 to 3000rpm Lamp Back clearance angle is motorised Grinding wheel advance is motorised Setting of the side clearance angle is pneumatic Hydraulic grinding wheel clamping. Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!!

Condition: used, Stehle HK 630 (semi-automatic straight knife grinder). Specification: • Maximum tool width 630 mm !!! • Tool diameter planer heads (min-max knife heads) 120 - 340 mm • Grinding wheel spindle speed 2850 rpm • Grinding wheel drive 1,1 kW Isdpfx Aov T Rkhsbmeif • Clearance angle 10 - 35° • Coolant tank 28 L • Motor coolant pump 0,28 kW • Connection values, total 2 kW Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!!

Condition: excellent (used), Year of construction: 2020, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 10002045, Weinig Rondamat from 2020, in very good condition. Iedpszi D Iuofx Abmeif

Condition: used, Year of construction: 2008, machine/vehicle number: 112051, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, Weinig Rondamat 960 Powerlock (automatic straight knife grinder and profiling grinder) The specifications are as follows: Weinig Rondamat 960 Powerlock / HSK profiling grinder. High-precision knife grinder for sharpening straight knives and profiling using a template. Sharpening of straight knives in a cutter block. Hand-held grinder for profiling and straight grinding. Ijdszg Ut Njpfx Abmsif Abrasive wheel diameter min./max.: 150 mm / 225 mm Abrasive wheel width: ceramic 5 mm, borazon 10 mm Abrasive wheel bore: 60 mm Tool circumference min./max.: 100 mm / 300 mm Tool width max.: 240 mm Abrasive wheel drive: 1.1 kW Spindle speed: 1700/2000/2400/3000 rpm Clearance angle: Radial: (rear) 10 - 30 degrees, Axial: 0 - 20 degrees For rotating heads up to 60 degrees Coolant tank approx. 50 liters Table feed: 0 - 240 mm Electrical connection approx. 2 kW POWER LOCK SYSTEM option For grinding powerlock tools. Tool holder with manual HSK quick-change system. Radial table mounting with precise adjustment. Max. tool width 240 mm.

Condition: used, Year of construction: 1982, I have a Weinig Rondamat 930 tool grinder, manufactured by the German company Weinig, for sale. The machine is in full working order. Isdpfszhipbox Abmeif The stated price is for export in Poland, plus 23% VAT. Transportation is the responsibility of the buyer.

Condition: used, functionality: fully functional, Weinig Rondamat 960 PowerLock cutterhead grinding machine Max. tool width: 240 mm Grinding wheel diameter: 150 – 225 mm Spindle speed, adjustable via frequency inverter: 1500 – 3000 rpm Angle adjustment – radial on the knife back: 10 – 30° Lateral adjustment in manual mode: 0 – 20° PowerLock tool clamping system Iiodpfxozhbruj Abmef This precision knife grinding machine is designed for: – Sharpening and manufacturing profiled knives from solid material according to a template – Re-sharpening straight planing knives in a cutterhead

Condition: excellent (used), WEINIG Rondamat 909, S/N 93362, Year 2001 – Ref. No. 119131 WEINIG Rondamat R 909, Machine for the automatic sharpening of straight knives in planing heads • Automatic indexing • Planer head diameter min. 85 mm to max. 225 mm • Max. tool length 330 mm (table stroke 440 mm) • Unlimited number of cutting edges • Continuously adjustable clearance angle 15° – 35° • Grinding spindle speed n=4,000 rpm • Grinding wheel D=125 mm, bore d=20 mm • Grinding motor 1.1 kW, n=2,850 rpm • Feeding motor 0.053 kW, n=1,300 rpm • Grinding feed rate 650 mm/min • Indexing motor 0.033 kW, n=1.00 rpm • Freely selectable grinding passes per tool 1 – 5 • Coolant pump motor 0.065 kW, n=2,900 rpm • Coolant / tank capacity approx. 115 liters • Mounting arbor D=50 x 330 mm • Machine complete with accessories Machine dimensions Iijdpfx Aswvql Nebmof • Width 1,150 mm • Depth 820 mm • Height 1,200 mm • Weight 450 kg Condition: 100% function tested = AS NEW condition Price: On request Payment: Prior to handover/loading Inspection: At any time by prior arrangement Subject to error and prior sale

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, Auction of a Weinig finger jointing machine! Iijdpox Rbl Nsfx Abmjf

Condition: excellent (used), Rondamat R 934, year 1997, in very good condition. Iiodpfx Abexiv S Eomof

Condition: excellent (used), Straightening machine, Optimatic RMO 880. Iiedpjzu Ix Ijfx Abmof

Condition: used, Year of construction: 1997, Profiling line, consisting of DEP Gabbiani + Weinig planing machine DEP Manufacturer: Gabbiani Type: T-Module 80/1600 Year of manufacture: 1997 Planing machine Manufacturer: Weinig Type: 22 BL Year of manufacture: 1995 Technical data of the DEP - 6 machining motors per side - 2 fixed scoring units, 3.2 HP / 3000 + 4500 RPM - 2 chip-removing units: 12.5 HP / 3000 + 4500 RPM - 2 chip-removing units: 12.5 HP / 3000 + 4500 RPM - 2 slotting units: 12.5 HP / 3000 + 4500 RPM - 2 free spaces - 1 feed motor: 4 HP / 1400 RPM Angle transfer between DEP and planing machine - Length: 290 - 1600 mm (1800 mm) - Width: 18 - 150 mm - Thickness: 5.5 - 50 mm - Density: 600 kg/m³ - Output max.: 150 workpieces/min - Belt conveyor after the double-end profiler - Toothed belt conveyor with brush attachment as counter holder - Cam conveyor for singulation - Toothed belt conveyor as buffer section - Longitudinal discharge - Roller conveyor before the planing machine - Control: Vipa, compatible with Siemens S7 300 - Safety technology Protective door switches: 3 Safety light barriers: 1 Technical data of the planing machine Working width and working height - Working width: 20 - 230 mm (with tool diameter 125 mm) - Working height: 9 - 140 mm (with tool diameter 125 mm) Infeed table - Length: 2000 mm - Adjustment range of the jointer table: 10 mm - Adjustment range of the fence: 10 mm Surfacing table - Length: 1200 mm - Adjustment range of the table: 10 mm - Adjustment range of the fence: 10 mm Ijdpfozuzfbex Abmeif Jointer spindle - Motor power: 5.5 - 15 kW Thicknessing spindle - Motor power: 5.5 - 11 kW Left spindle - Motor power: 5.5 - 11 kW 2. Right spindle - Motor power: 5.5 - 11 kW Top spindle - Motor power: 5.5 - 22 kW Bottom spindle - Motor power: 5.5 - 22 kW Universal spindle - Motor power: 5.5 - 11 kW Feed - Cardan feed, continuously adjustable: approx. 6-36 m/min - Motor power: 4 - 8.6 kW Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2009, total height: 2,500 mm, total length: 40,500 mm, total width: 2,400 mm, Colour: Blue Empty weight: 30.900 kg Price: On request 4 tool changers, 24 pcs each Plus external magazine 117 positions Drilling unit 2, 4x horizontal only Incl. Oertli tools Max. machining length 6 meters NEXUS Software (HMI) Output table 320x360 cm Operating hours cannot be read out - Year: 2009 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 113040 - Number of milling spindles [pcs.]: 6 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 3 - - Min. spindle speed [rpm]: 0 - - Max. spindle speed [rpm]: 18000 - - Main motor power [kW]: 20 - └ Milling spindle 2: - - Number of controlled axes [pcs.]: 3 - └ Milling spindle 3: Iodpezt Nadofx Abmjif - - Number of controlled axes [pcs.]: 4 - - C-axis present: Yes - └ Milling spindle 4: - - Number of controlled axes [pcs.]: 4 - - C-axis present: Yes - Tool holder: HSK-F63 - Drilling unit present: Yes - └ Motor power [kW]: 2.5 - └ Horizontal drill spindles [pcs.]: 4 - └ Vertical drilling spindles [pcs.]: 6 - Tool changer positions [pcs.]: 24 - System/software: Nexus - Safety feature: Door interlock switches, Enclosed fence - Tools included: Yes - CNC options: Unloading system, Label machine, Loading system - Table length [mm]: 6000 - Table width [mm]: 3800 - Installed length [mm]: 26000 - Installed width [mm]: 9500 - Installed height [mm]: 2850 - Transport dimensions: 40500mm x 2400mm x 2500mm (l x w x h) - Transport weight [kg]: 30900kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Weinig Univar 10 automatic moulding machine for profiling and milling windows and doors, individual components and similar items with circumferential profiles, including a mechanism for single-person operation Iodpfxjztv Eaj Abmeif Units: Technical data: - 1. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4×80, hydraulic, synchronisation device - 2. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4×80, hydraulic,