Used Showa Ymas-3 for sale (61,622)

Condition: good (used), Central lubrication, oil circulation system, inlet pump, central lubrication unit -Manufacturer: Showa, central lubrication unit from Matsuura MC 710V milling machine Cgodpfx Adsgxqt Uo Net -Type: YMAS-3 -Container capacity: 2 liters -Dimensions: 110/220/H250 mm -Weight: 4.2 kg

Condition: ready for operation (used), operating hours: 6,512 h, functionality: fully functional, mileage: 44,264 km, power: 55 kW (74.78 HP), first registration: 04/2016, overall weight: 3,500 kg, fuel type: diesel, color: traffic orange, axle configuration: 4x4, maximum load weight: 1,500 kg, empty load weight: 2,000 kg, next inspection (TÜV): 05/2026, fuel: diesel, wheelbase: 1,600 mm, driver cabin: other, gearing type: hydrostat, emission class: euro5, Equipment: additional headlights, air conditioning, all wheel drive, hydraulics, soot filter, Hako Sweeper Citymaster 1600 from 1st Owner Former municipal / authority vehicle 3-Broom Sweeping System Portal arm with weed control function Registered as a self-propelled work machine (40 km/h) Major engine inspection including timing belt, water pump, oil, and filters will be performed upon sale 6,512 total operating hours 3,767 sweeping operating hours 44,264 kilometers 4x4 all-wheel drive – hydrostatic all-wheel drive system Waste container made of stainless steel Wheelbase: 1,600 mm Cedpfxoyf Hihe Ad Negt Track width: 1,055 mm Fresh water tank: 180 liters Unladen weight approx. 1,900 kg Permitted total weight: 3,500 kg Length: 4,510 mm / Width: 1,210 mm / Height: 1,970 mm Travel speed: 0–40 km/h Working speed: 0–24 km/h Noise insulation package Engine: Water-cooled 4-cylinder VW industrial diesel engine Fuel tank approx. 60 liters Hydrostatic all-wheel drive 2-circuit high-pressure hydraulics - Circuit 1 (front): 0–50/0–70 l/min at 225 bar - Circuit 2 (rear): 0–20/25/30 l/min at 195 bar Hydraulic service brake operated via foot pedal Cab with air-suspended driver’s seat Air conditioning / heating Water treatment system Hydrant connection Dosing system Permitted total weight: 3,500 kg Unladen weight: 1,950 kg Other applications possible with additional HAKO attachments such as sweeper brushes, snow plough, and lawn mower (not included in delivery) Subject to errors, changes, and prior sale We sell exclusively under our General Terms and Conditions and exclude any form of warranty. Errors, changes, and prior sale reserved. We are available Monday to Friday from 9:00 am to 5:00 pm. Saturdays by appointment; outside these hours, appointments can be arranged by phone. We are happy to accept your current used machine/vehicle in part exchange. Sales to commercial customers and exporters are preferred; this applies to our entire vehicle inventory. The details provided above are non-binding; errors, changes, and prior sale subject to reservation.

Condition: used, mileage: 57,486 km, power: 75 kW (101.97 HP), first registration: 09/2014, overall weight: 4,900 kg, fuel type: diesel, color: orange, axle configuration: 4x2, maximum load weight: 2,450 kg, empty load weight: 2,450 kg, wheelbase: 1,900 mm, brakes: other, driver cabin: day cab, gearing type: automatic, emission class: none, suspension: steel, number of seats: 2, maximum speed: 50 km/h, Equipment: additional headlights, air conditioning, cabin, immobilizer system, onboard computer, parking sensors, power assisted steering, soot filter, * German vehicle * From first owner * ONLY 57,478 km * Only 5,715 original operating hours * Condition: see photos * Hako Citymaster 2000 * Switchable four-wheel steering * 3-brush system: 2 main brushes (700mm) & 1 front brush (900mm) * Leaf vacuum at the rear * Sweeping width: 2,600 mm * Pre-spray unit – high-pressure cleaner * Track width: 1,033 mm * Ideal for pedestrian paths, walkways, cycle paths, narrow alleys, etc. * Stainless steel debris container: 1.99 m³ * Fresh water tank: 330 liters * Hydraulic high dump, tiltable up to 45° * VW 4-cylinder diesel engine * Power: 75 kW / 102 HP Cgedpfxexh Ezgo Ad Net * Road registration for 50 km/h * 2-person full comfort cab * Air conditioning * Reversing camera * Ergonomically arranged controls * Central lubrication * Beacon lights * EasyDrive (hydrostatic drive) (SN) * Wheelbase: 1,900 mm * GVW: 4,900 kg * Curb weight: 2,450 kg * Payload: 2,450 kg * Self-propelled road sweeper, unrestricted access to all environmental zones If a new TÜV inspection is required, we are happy to provide an offer in cooperation with our partner workshops. Our offer is generally WITHOUT new TÜV inspection, DGUV, SP, or UVV. More trucks available on our website: We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend inspection and testing of the item to avoid misunderstandings regarding its condition and suitability. Viewing and testing are possible at any time by appointment and are expressly encouraged. All information is provided without guarantee. No liability is assumed for errors or inaccurate details in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale, and errors.

Condition: used, operating hours: 7,136 h, functionality: fully functional, machine/vehicle number: TB1113, mileage: 61,907 km, power: 75 kW (101.97 HP), first registration: 12/2016, overall weight: 3,500 kg, fuel type: diesel, color: orange, axle configuration: 4x2, next inspection (TÜV): 01/2028, fuel: diesel, driver cabin: day cab, gearing type: hydrostat, emission class: euro5, Equipment: hydraulics, soot filter, * Hako Citymaster 2000 sweeper Cgedpfx Adjh Un Uzo Net * 3rd brush system sweeper * From 1st hand former municipal / authority vehicle * Approved as a self-propelled machine (environmental sticker exempt) * Approval as 3500 kg machine, drivable with all car driving licenses * Upweighting to 4900 kg possible * On request, the major engine inspection with timing belt, water pump, oils and filters can be carried out by us when the machine is sold * VW TDI industrial engine (4 cylinders) * Low-emission Euro 5 * Diesel particulate filter * High pressure pump with high pressure lance * 4293 sweeping operating hours * 7136 total operating hours * Joystick control * Weed brush possible on the portal arm brush * Switchable all-wheel steering * Sweeping width adjustable from 140 cm to 260 cm * Water pump for fresh and circulating water * 350 liter fresh water tank * Tiltable stainless steel debris container * Swivel seat driver * Yellow rotating beacon * Ready to use condition --- We sell exclusively for our own and under exclusion of any warranty. Errors, changes and prior sale reserved --- * We are there for you Monday - Friday from - o'clock, Saturday by appointment, outside these opening hours appointments can be made by telephone. * We will be happy to trade in your current used appliance/vehicle. * Sales to tradesmen and exporters are given priority, this applies to our entire vehicle stock. * The above information is non-binding, errors/changes and prior sale reserved!

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW SEE THE TECHNICAL DESCRIPTION BELOW 1. Bale Size: 400mm x 400mm x... 2. Container Dimensions (Width x Length x Height): 1.000mm x 2.000mm x 800mm 3. Capacity: 4 tons/hour (Steel), 5 tons/hour (Copper), 2 tons/hour (Aluminium) 4. Cycle Time: 90 seconds ( Idle ) 5. Top Cover Cylinder Thrust: 90 tons 6. Preliminary Compression Cylinder Thrust: 150 tons 7. Main Compression Ram Thrust: 210 tons 8. Maximum Working Pressure: 300 bars 9. Electric Motor: 37 kW 10. Machine Dimensions (Width x Length x Height): 3.400 mm x 6.800 mm x 3.000 mm 11. Machine Weight: 18.000 kg 12. There will be an ejection door. 13. Repairable and four-edge-usable blades. 14. Container walls will be covered with HARDOX 450 - 500 material. 15. There will be an automatic SKF liquid lubrication system integrated into the compression chamber. 16. There will be an automatic SKF greasing system that will grease the bushings. 17. Piston shafts will be induction-hardened and chrome-plated. 18. Pumps and valves used in the hydraulic system will be by PARKER or EATON VICKERS & KAWASAKI brand. 19. Bypass filter will be added to the hydraulic system. 20. There will be an AKG Hydraulic Oil Cooling System. Cgsdsdfc Iyspfx Ad Njt 21. All electrical parts will be SIEMENS or SCHNEIDER Brand. 22. The machine will be fully automatic with PLC control, PLC brand and model will be SIEMENS. There will be a touch screen SIEMENS HMI Simatic Panel with emergency buttons placed on some important points. 23. There will be blades from 2767 material (hardness 55HRC) at the borders of the top cover and the sides of the scrap chamber. 24. Machine will be under AYMAS Makina San. Ve Tic. A. S. Guarantee for 1 year or 2.500 working hours whichever comes first against manufacturing defects.

Condition: new, Year of construction: 2025, 1. Electric Motors Total Power: 360 kW 2. Machine Weight: 44.000 kg 3. Shredding Capacity: 10 - 15 tons/h (Iron & Steel) 4. Blade Quantity: 78, Blade Thickness: 150 mm. 5. Loading Chamber Dimensions: 2350 x 4085 mm 6. Shredding Chamber Dimensions: 1500 x 2000 mm 7. Replacement and maintenance of the blades can be easily done from the top of the chamber. Cgedpfx Aodfc Uzed Njt 8. Cutting blades are made of material No: 2767 9. Main shafts are made of material: 42 CrMo4, 32-34 HRC (Twisting and breaking resistant ) 10. All chamber walls will be covered with anti-wearing armor steel material HARDOX 500. 11. All static blades and distance rings will be made of HARDOX 450. 12. Speed: 4,5 – 6 rpm 13. The movement power of shafts will be provided by four planet reductors which are driven by four power-controlled bi-directional hydro motors. Hydraulic equipment will be PARKER brand or BOSCH-REXROTH. 14. There will be hydraulic oil and reducer oil cooling units separated from each other. 15. Each shaft will be able to move independently from each other. 16. The loading of the shredder can be done by crane 17. The machine will stop itself with an acoustic warning with the help of security sensors which are going to protect the machine against any harm. 18. There will be an automatic grease oiling system to keep bearings oiled automatically. 19. All electrical parts will be SCHNEIDER and SIEMENS brand. 20. The machine will be fully automatic with PLC control. There will be a touch screen on the control panel which will provide easy access to machine settings and process monitoring. 21. The machine will be under Aymas Makina San. Ve Tic. A. S. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) operation hours. 22. The machine is CE certificated. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements.

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW SEE THE TECHNICAL DESCRIPTION BELOW 1. Bale Size: 500mm x 500mm x... 2. Container Dimensions (Width x Length x Height): 2.000mm x 2.500mm x 1.100mm 3. Capacity: 15-20 tons/hour (steel) 4. Cycle Time: 90 seconds ( Idle ) 5. Top Cover Cylinder Thrust: 90 tons 6. Preliminary Compression Cylinder Thrust: 150 tons Cgedpfegwa T Rjx Ad Nst 7. Main Compression Ram Thrust: 300 tons 8. Maximum Working Pressure: 300 bars 9. Electric Motor: 2 x 75 kW = 150 kW 10. Machine Dimensions (Width x Length x Height): 10.000 mm x 10.000 mm x 4.000 mm 11. Machine Weight: 55.000 kg 12. There will be an ejection door. 13. Repairable and four-edge-usable blades. 14. Container walls will be covered with HARDOX 450 - 500 material. 15. There will be an automatic SKF liquid lubrication system integrated into the compression chamber. 16. There will be an automatic SKF greasing system that will grease the bushings. 17. Piston shafts will be induction-hardened and chrome-plated. 18. Pumps and valves used in the hydraulic system will be by PARKER or EATON VICKERS & KAWASAKI brand. 19. Bypass filter will be added to the hydraulic system. 20. There will be an AKG Hydraulic Oil Cooling System. 21. All electrical parts will be SIEMENS or SCHNEIDER Brand. 22. The machine will be fully automatic with PLC control, PLC brand and model will be SIEMENS. There will be a touch screen SIEMENS HMI Simatic Panel with emergency buttons placed on some important points. 23. There will be blades from 2767 material (hardness 55HRC) at the borders of the top cover and the sides of the scrap chamber. 24. Machine will be under AYMAS Makina San. Ve Tic. A. S. Guarantee for 1 year or 2.500 working hours whichever comes first against manufacturing defects.

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: THE MACHINE WILL BE BRAND NEW An Inclined Shear is a heavy-duty machine used in metal recycling facilities to cut various types of scrap materials efficiently. • Mixed and heavy-duty scrap can be processed (HMS 1 & 2, cars, pipes, etc. ) • No scrap length limit • No operator needed • Cut length adjustment options • Electric and Diesel options • Stationary and semi-mobile options • Hydraulic blade tightening system • The guillotine is made of casting • A remote diagnostic system is implemented • Automatic lubrication • Good output density • Heavy-duty structure • Chrome-plated & tampered shafts and sensitively honed cylinders • Special anti-wear plates • Reliable filtration system for the hydraulic oil • Reliable cooling system depending on the working climate • Top-brand hydraulic and electronic components The machine is CE-certified. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. Machine will be under AYMAS Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours. SEE THE TECHNICAL DESCRIPTION BELOW Model: IS 1350 Cutting Force: 1.350 ton Hold Down Force: 250 ton Side Compression Force: 2x200 ton Cutting Width: 1.040 mm Cgodpfegv Abpex Ad Net Number of Cuts: 2-3 cuts/min. Capacity up to 50 ton/h Weight: 128 ton Electrical Motor Power: 3x132 kW Chamber Dimensions: (W x L) 2,45 m x 8,5 m. General Dimensions: (W x L) 4,6 m x 11 m.

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: THE MACHINE WILL BE BRAND NEW The compression chamber walls are covered with HARDOX material for long-term life-cycle and friction resistance. A hydraulic Oil Cooling system is implemented for efficiency in hot climate conditions. Cylinder Rods are induction-hardened and chrome-plated. Pumps and valves of hydraulic systems are from worldwide reputable brands such as PARKER, and BOSCH-REXROTH. The machine is fully automatic by PLC control. It is easy to use with the help of the touch screen. All electrical and electronic parts are by SCHNEIDER and SIEMENS Brands. The machine is CE-certified. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. Machine will be under Aymas Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours. Cgedpfx Aodfcqaed Nst SEE THE TECHNICAL DESCRIPTION BELOW Bale Size 400mm x 400mm x... Bale Weight 120-180 kg (Steel), 50-80 kg (Aluminium),150-200 kg (Copper) Press Box Dimensions (Width x Length x Height): 1.000mm x 2.700mm x 900mm Loading Bunker Dimensions (Width x Length x Height): 1.650mm x 2.300mm x 800mm Feeding Opening: 1.000mm x 1.600mm Capacity*

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: THE MACHINE WILL BE BRAND NEW The compression chamber walls are covered with HARDOX material for long-term life-cycle and friction resistance. A hydraulic Oil Cooling system is implemented for efficiency in hot climate conditions. Cylinder Rods are induction-hardened and chrome-plated. Pumps and valves of hydraulic systems are from worldwide reputable brands such as PARKER, and BOSCH-REXROTH. The machine is fully automatic by PLC control. It is easy to use with the help of the touch screen. All electrical and electronic parts are by SCHNEIDER and SIEMENS Brands. The machine is CE-certified. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. Machine will be under AYMAS Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours. Cgodpfx Aod Iya Nod Not SEE THE TECHNICAL DESCRIPTION BELOW Bale Size 400mm x 400mm x... Bale Weight 100-180 kg (Steel), 40-100 kg (Aluminium),120-180 kg (Copper) Press Box Dimensions (Width x Length x Height): 1.000mm x 2.600mm x 900mm Loading Bunker Dimensions (Width x Length x Height): 1.500mm x 2.200mm x 650mm Feeding Opening: 1.000mm x 1.600mm Capacity*

Condition: new, Year of construction: 2025, MACHINERY WILL BE BRAND NEW The machinery is available to bale aluminum cans as well as steel cans up to 0.2 mm of the thickness and 3 liters of the volume. All electric-electronic materials will be from Schneider and Siemens Brand. The machine will be fully automatic with PLC control and a touch screen Siemens HMI Simatic Panel with emergency buttons. Machine will be under AYMAS Makina San. Ve Tic. A. S. Guarantee for one (1) year or two thousand five hundred (2.500) operation hours, whichever comes first. There will be an Oil cooling/heating system depending on the operation zone. MB 500 Magnetic Separator and VH (120-250) Vibration Hopper are optional for separating the scrap aluminum and steel cans and for getting rid of the dirt and dust in the scrap. Technical Specifications: Bale Size: 500mm x 330mm x ... Container Dimension (Width x Length x Height): 500mm x 1.000mm x 330mm Cedpjrc Dkqjfx Ad Nsgt Capacity Up to 1.000 kg/hour (Aluminum) Up to 2.000 kg/hour (Steel) Bale weighs with a mechanic scale system: 10-20 kg Cycle Time: 30 seconds Top Cover Cylinder Force: 25 tons Main Compression Cylinder Force: 100 tons General Working Pressure: 225 bars Machine Dimensions (Width x Length x Height): 1.100mm x 4.200mm x 2.600mm Electric Motor: 18,5 kW Machine Weight: 5.000 kg

Condition: excellent (used), Conventional lathe Manufacturer: ZMM Sliven Huvema Inventory no. Model: HU310 x 750 Year of manufacture: 2007 Distance between centers: 750 mm Center height: 155 mm Swing over bed: 310 mm Spindle bore: 32 mm 3-jaw chuck Quick-change tool holder Voltage: 380 V Machine weight approx. 700 kg Csdpfxjy I Dqvo Ad Nogt 3 units in stock!!!

Condition: new, carrying capacity per cantilever arm: 650 kg, shelf height: 4,000 mm, total length: 4,000 mm, total width: 1,480 mm, load capacity per stand: 1,950 kg, Specifications: - H: approx. 400 cm - D: approx. 148 cm - L: approx. 400 cm - Cantilever arms: approx. 120 cm including 8 cm front deflector - Axis dimension: 130 cm - NEW, immediately available from stock. - 650 kg load capacity per arm - 1950 kg load capacity per upright - Uprights in RAL 7016. - Cantilever arms in RAL 3000 - Arms are hooked in. - Arms adjustable in 100 mm increments. - Levels: Base + 3 storage levels (4 storage levels) The uprights in this shelving set are prepared for possible conversion to double-sided use free of charge. For the advantages of a hooked cantilever arm, see illustrations. Shelf consists of: - 4 uprights, including base section approx. 400 cm, made of IPE180. - 12 cantilever arms, approx. 120 cm, made of 10 cm x 4 cm profile. - Includes all necessary fasteners and screws. Price: €1,995.00 net €2,374.05 gross You will receive an invoice with VAT. Cgedpfjy Ixgxex Ad Net Accessories such as ground anchors, collision protection, etc. can also be purchased from us. Transport: Delivery is available upon request through our partner shipping company; costs depend on the zip code. Installation: Our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment if required. Our recommendation: Let us know your needs... We are happy to assist you with the implementation of your projects, from planning and ordering to installation.

Condition: ready for operation (used), 40 mm x 40mm x20 mm cutting €3 each Cgjdpfx Ajyhnqled Net

Condition: excellent (used), For sale: Industrial pump from the renowned manufacturer Grundfos. Model SPK 4-8 – vertical multistage pump designed for clean liquids, coolants, industrial installations, and CNC machines. Cgedpeywpahefx Ad Njt Technical data: Manufacturer: Grundfos Model: SPK 4-8 A-A-A Power: 0.55 kW Speed: 2850 rpm Capacity: approx. 3 m³/h Head: up to 28 m Liquid temperature: max 90°C Country of manufacture: Denmark Condition: Used, fully functional. Visible signs of use (abrasions, minor corrosion – see photos). A crack is visible near the nozzle on the casing – does not affect operation (buyer to verify).

Condition: used, diameter div. Cgedpfx Aeww Nbxed Nst number 40x tool adaptor BT 40

Condition: good (used), functionality: fully functional, load capacity: 3,000 kg, Equipment: foot remote control, Sideros Rotolift with 3000 kg load capacity Technically sound, operates flawlessly Dimensions: Horizontal height min. 0.72 m, horizontal height max. 1.59 m Cgedey Hl A Rjpfx Ad Net Vertical height min. 0.74 m, vertical height max. 1.54 m Length 2.5 m, width 1.0 m Diameter 1.25 m

Condition: excellent (used), Year of construction: 2001, Technical Data Bandsaw B 3; Year of manufacture 2001 For wood and metal Cutting height: 500 mm Cutting length: 660 mm Angle: 0° Saw blade dimensions: 4620 x 27 mm Table size: 710 x 1060 mm Csdpfx Ajy E Nfaod Njgt Rated power: 3.00 kW Power supply: 380/50 V/Hz Dimensions: 790 x 1200 x 2290 mm Weight: 275 kg

Condition: good (used), Year of construction: 1996, operating hours: 5,500 h, Wide belt sander with 1100 mm sanding width 1. aggregate rubberized roller 2. aggregate electron. 3 stage motor with left and right rotation selectable 3. aggregate electron. Electronic link shoe with infinitely variable belt speed 4. blowing duct 2 stage feed Cjdpfx Asghymhod Nogt Vacuum carpet

Condition: like new (used), Fortuna Dough Divider for 30 pieces up to 100 grams if you have further questions please sent an request Cedpfx Aeumnzyjd Negt

Condition: excellent (used), CATALOG NUMBER 7614 Technical data: - Inlet width: 550 mm - Inlet height: 220 mm - Shaft width: 630 mm Cedpfxsydc R Sj Ad Negt - Knife length: 630 mm - Number of knives: 2 pcs - Sieve dimensions: 60x60 mm - 2 lower toothed feed shafts - Lower shaft motor approx. 1.5 kW - Upper toothed feed shaft - Upper shaft motor approx. 1.5 kW - Vibrating chute - Vibrating chute length: 4750 mm - Vibrating chute width: 450 mm - Main motor: 45 kW - Vibrating chute motor: 1.5 kW - Auto-reverse - Reverse mode - Overall machine dimensions L/W/H: 3200x1700x1400 mm - Overall machine dimensions L/W/H: 4750x800x1100 mm - Weight approx.: 4500 kg ADVANTAGES – Auto-reverse (adjustable) – Reverse mode – Used chipper, in very good condition Net price: 120,900 PLN Net price: 28,780 EUR (depending on the 4.2 EUR exchange rate) (Prices subject to change with significant exchange rate fluctuations)

Condition: used, functionality: fully functional, load capacity: 2,000 kg, Equipment: foot remote control, 3-axis welding positioner, 2-ton load capacity, in good condition Incl. hand remote control (foot control available on request) Inclination and rotation speed continuously adjustable 0.05 - 1.0 rpm Clamping plate diameter: 1.0 meter Cgsdpsyupgzsfx Ad Net Height tilted to center min. approx. 0.7 m, horizontal 0.9 m Height tilted to center max. 1.6 m, horizontal 1.8 m Length 2.2 m, width 1.35 m

Condition: excellent (used), For sale: WAGNER FCA 500 universal milling machine in very good technical condition. This machine features robust German construction and is equipped with a 3-axis digital readout (DRO), which significantly facilitates precise machining operations. The mill is ideally suited for tool shops, single-part production, as well as maintenance and service work. Technical specifications: • Manufacturer: WAGNER Maschinen Cgsdjyrhb Sopfx Ad Njt • Model: FCA 500 • Year of manufacture: 2004 • SINO digital readout – 3 axes (X,Y,Z) • Spindle speeds up to 2000 rpm • Power supply: 380 V • Frequency: 50 Hz • Total power: 6.5 kW Equipment: • Vertical milling head • SINO digital readout • Variable speed control • Large work table with T-slots The machine is complete, in good technical condition, and shows normal signs of use.

Condition: excellent (used), For sale: Professional KLN Ultraschall / MECASONIC OMEGA 3 MCA ultrasonic welding machine – an industrial system for precision joining of plastics. Cgsdpsyzui Aofx Ad Nst The device is designed for use in: - Serial production - Automotive industry - Electronics and medical sectors - Welding plastic components (e.g. housings, blisters) ⚙️ Specification: Manufacturer: KLN Ultraschall (Crest Group) / MECASONIC Model: OMEGA 3 MCA Type: Ultrasonic welding system Year of tooling production: 2011 Control: MCA digital control panel Cycle counter: approx. 23,000 Two-hand safety start system (operator safety) Industrial power supply 📦 Included in the set: - Complete welding unit - MECASONIC MCA controller - Work table with tooling (mould / fixture – "Blister") - Pneumatic installation (visible in the photos) - Cabling 📊 Condition: - Used device - Visually in very good condition - Normal signs of use (as seen in the photos) - Machine powers up – control panel operates - No complete production testing performed 📄 Additional information: - Cycle counter visible on display - Safety instructions (DE) on the housing - Robust industrial construction ✅ Advantages: - High welding precision - Fast process (ultrasonic) - Reliable industrial technology - Ready for integration or standalone operation - Reputable manufacturers (KLN / MECASONIC) 🚚 Shipping: - Pallet shipping - Personal collection possible - International shipping available

Condition: good (used), Year of construction: 2016, For sale is a package of three well-maintained injection moulding machines. The machines are in good technical and visual condition and have been regularly serviced. Overview of the machines: Cgedpfjyxiq Nsx Ad Not Machine 1: Haitian MA600 II/130 eco, Year of manufacture: 2016, Clamping force: 60t Machine 2: Wittmann Battenfeld EcoPower 110/350, Year of manufacture: 2011, Clamping force: 110t Machine 3: Demag Ergotech 1000/500-600, Year of manufacture: 2007, Clamping force: 100t All machines are immediately ready for operation. Machines are available! Subject to prior sale, changes and errors excepted!