Used Sicar Sicar Unica 2R Wide Belt Sander for sale (14,183)

Condition: good (used), max. width of the processed element 1100mm max. height of the processed element 180mm 2 units: 1) grooved rubber roller for calibration 2) grooved rubber roller for calibration pneumatic belt oscillation electric lifting of the table top 2 types of feed speed main engine 15kW working pressure 6-8bar paper blowing Crjdewm S S Eepfx Adroh

Condition: used, Year of construction: 2002, Used machine Equipment: - Constant working height due to a motor-driven, height-adjustable upper section - 1st sanding unit with a rubberized and grooved contact roller, contact roller with 180 mm diameter, 75ø shore, contact roller level adjustable in steps - 2nd sanding unit with a height-adjustable air sanding pad - Belt drive motor 15 kW, 380 volts, with soft start for low power consumption during startup - Parallel, spring-mounted, ground infeed pressure roller - Pneumatic belt tensioning with length compensation - Air-controlled sanding belt oscillation - Immediate stop of the sanding belt drive with disc brake in case of belt breakage, belt slippage, or pressure drop - Automatic star-delta contactor - Thickness indicator for workpiece thickness - Workpiece feed 0.75 kW with a fabric-reinforced rubber conveyor belt - Automatic centering of the feed belt - Rubberized belt drive roller - Ammeter for monitoring the chip removal rate - Max. workpiece thickness 160 mm - Sanding belt dimensions 1120 x 2000 mm - CE version/dust-tested - Infeed roller table - Outfeed roller table - Feed speed continuously adjustable from 3-15 m/min via a frequency converter, control from the front at the operator side Credjz Iupwjpfx Adreh - Automatic workpiece thickness adjustment across the entire working width, including over-thickness protection - Adjustment or pre-selection of the chip removal rate via a dial gauge - ENORM-matic quick adjustment with feed release - Operating hour counter in the electrical cabinet Availability: short-term Location: Flörsheim

Condition: good (used), Year of construction: 1990, functionality: fully functional, STEMAC Wide belt sander for lacquer sanding MICRON 1 R Manufacturer Stemac Italy year of construction 1990 S/N S90.503 working width 1350mm Crodpfxstyyl Ss Adrjh 1 lacquer sanding unit 20 kW, infinitely variable speed Sanding belt length 2620mm with cleaning brush Infinitely variable feed Sanding belt blow-off device Electronic work table adjustment 400 V , 50 Hz Weight approx. 4300 kg with some additional sandpaper

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: A80722MM2, grinding width: 1,350 mm, power: 31 kW (42.15 HP), height adjustment type: electric, Automatic leveling wide belt sander suitable for fine sanding of solid wood. This sander belongs to the top range of automatic wide belt sanders and stands out, in particular, for its small machine size, perfect sanding quality, ease of operation, and high reliability. It was used for final sanding of solid parquet. 2 main units: soft sanding cylinders, 1350 mm Additional units: Scotch-Brite brush, cleaning brush, cleaning air blowers Total maximum power consumption: 31 kW Sanding width: 1350 mm Max. workpiece height: 160 mm Constant working height of the machine – suitable for integration into a production line Motorized adjustment of working thickness with LCD display Continuously adjustable feed rate of the conveyor belt Continuously adjustable speed of both working units Pneumatic blowers for the working units Ammeter for monitoring motor load Remote shutdown of units from the control panel Stop with 4 positions for compensating for belt grit Perforated conveyor belt with the option of vacuuming up parts Roller extension of the table at the input and output Pneumatic oscillation, electronically controlled CE safety standard Weight: 3800 kg Year of manufacture: 2008 Codpfx Adey Idxysrjrh Damage to the first sanding cylinder – see photo Negotiable price: 25,000 EUR (excluding VAT) The machine is fully functional and sold in its current condition. In stock in Telnice, near Brno – Czech Republic Testing, demonstration, and operator training are included.

Condition: excellent (used), CATALOGUE NUMBER 8032 TECHNICAL DATA - max. width of workpiece 970 mm - max. height of workpiece 160 mm - 2 units - 1) grooved rubber roller - 2) two metal rollers + shoe - power of unit I and II: 11 kW - total power: 12 kW - brake * from above: - metal roller, sliding - pressure roller - unit - metal roller, sliding - pressure roller - unit - metal roller, sliding * from below: - rubber roller, sliding - conveyor belt - pneumatic belt oscillation - electric table lifting - 2 types of feed speed - feed motor approx. 0.75 kW - working pressure 8-10 bar - diameter of dust extraction nozzle 2x160 mm - overall dimensions (L/W/H) 1600x1500x2000 mm - weight 1370 kg ADVANTAGES – Made in Italy – 2 units – Unpainted – Used grinder, very good condition Crjdezxg H Sjpfx Adrjh Net price: 21900 PLN Net price: 5090 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to higher fluctuations)

Condition: good (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: G2512-01, total width: 1,600 mm, total height: 2,150 mm, total length: 2,550 mm, working width: 450 mm, overall weight: 2,600 kg, power: 46.4 kW (63.09 HP), grinding belt speed: 14,000 mm/s, type of input current: three-phase, grinding belt length: 1,900 mm, compressed air connection: 6 bar, grinding belt width: 470 mm, air demand: 6 m³/h, input voltage: 400 V, operating pressure: 6 bar, workpiece width (max.): 450 mm, Grindingmaster wide belt sander (wet-type) equipped with 2 top-mounted sanding units and a brush unit (Scotch-Brite). The machine is used for surface processing of metal parts up to 450 mm wide. The dust collection container with filter fleece is located underneath. The machine is in good, partially overhauled condition. Csdpfx Adsyn E H Rererh Further technical information can be found in the documentation.

Condition: excellent (used), CATALOGUE NUMBER 6582 TECHNICAL DATA - max. width of the workpiece: 920 mm - max. height of the workpiece: 150 mm 2 units: 1) grooved rubber roller for calibrating, 11 kW 2) grooved rubber roller for calibrating + tape blowing, 7.5 kW Top: - 2 slip rubber rollers - unit - 2 slip rubber rollers - unit - 2 slip rubber rollers Bottom: - 3 slip rubber rollers - conveyor belt - pneumatic belt oscillation - electric table lifting - stepless feed speed adjustment - working pressure 8-10 bar - pneumatic brake - diameter of the dust extraction nozzle: 2 x 160 mm - overall dimensions (L/W/H): 1600 x 1460 x 2000 mm - weight: approx. 1305 kg Crjdpfx Adszw Dchjrjh - Made in Germany - 2 units - Used grinder, very good condition Net price: 24,900 PLN Net price: 5,791 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (Prices may be subject to change in the event of significant exchange rate fluctuations)

Condition: good (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 2005.09 261, overall weight: 12,500 kg, power: 180 kW (244.73 HP), input frequency: 50 Hz, input current: 350 A, input voltage: 400 V, Working machine. Csdpjzu I Ehefx Adrerh Planned dismantlig 2026-12 no manual or documents.

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, grinding width: 1,350 mm, overall weight: 2,500 kg, grinding height: 200 mm, The machine is equipped with the following processing units (further details can be found in the attached document): 1. Contact roller unit (250 mm diameter / cutting speed 18 m/sec / sanding belt 1370 x 2620 mm) 1. Sanding roller in grooved steel design 2. Contact roller unit (250 mm diameter / cutting speed 18 m/sec / sanding belt 1370 x 2620 mm) Crjdoz Hxnbepfx Adrjh 2. Sanding roller in grooved steel design 3. Contact roller unit (250 mm diameter / cutting speed 18 m/sec / sanding belt 1370 x 2620 mm) 3. Sanding roller, 85 Shore TECHNICAL DETAILS Sanding height: 3 - 200 mm Sanding width: 1,350 mm Sanding belt dimensions: 1,370 mm x 2,620 mm Feed speed: 2.8 - 20 m/min MACHINE DETAILS Extraction connection: 3 x 200 mm Motor power: 18.5 kW (25.0 HP) Motor voltage: 50/60 Hz Electrics: 3x400V 50Hz CE version Vacuum table with blower: 4 kW (5.5 HP) Reversing function: 3 Weight: 2,500 kg EQUIPMENT Feed table with electric height adjustment 3 motors: 18.5 kW (25 HP) each with SD start sanding belt brake Touch screen control with color display Additional extraction connection Note: The machine is delivered without a power cable. The electrical connection must be provided on site.

Condition: excellent (used), CATALOGUE NUMBER 7773 TECHNICAL SPECIFICATIONS - max. width of workpiece: 900mm - max. height of workpiece: 160mm Cjdpfxeztw D De Adrorh – Top: - metal, sliding roller I unit – ribbed rubber roller for calibrating II unit – 2x metal roller for calibrating + shoe – Bottom: - conveyor belt - pneumatic belt oscillation - electric table lifting - main motor: 15kW/11kW - feed motor: 1.5kW - working pressure: 6-8bar - diameter of extraction nozzle: 2x200mm - dimensions (L/W/H): 1850x1950x2040mm - weight: approx. 3000kg ADVANTAGES – Made in Italy – Calibrating grinder + shoe – Used grinder, very good condition Net price: 13900 PLN Net price: 3230 EUR, depending on the exchange rate of 4.3 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: used, Year of construction: 1999, total width: 1,800 mm, total height: 2,320 mm, total length: 1,700 mm, Colour: White Empty weight: 2.500 kg - Year: 1999 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 99125681 - Number of units [pcs]: 2 - └ Unit 1: - - Position: Top - - Type of unit: Contact roller - - Sanding belt length [mm]: 1890 - - Sanding belt width [mm]: 1110 - - Roller diameter [mm]: 175 - - Roller material: Rubber - - Motor power [kW]: 18.5 - └ Unit 2: - - Position: Top - - Type of unit: Contact roller Credpfxjzr Hx Us Adrjh - - Sanding belt length [mm]: 1890 - - Sanding belt width [mm]: 1110 - - Roller diameter [mm]: 1750 - - Roller material: Rubber - - Motor power [kW]: 18.5 - Max. working width [mm]: 1100 - Min. working height [mm]: 30 - Max. working height [mm]: 183 - Infeed table length [mm]: 400 - Outfeed table length [mm]: 250 - Feed motor [kW]: 0.75 - Voltage [V]: 380 - Current consumption [A]: 36 - Fuse [A]: 63 - Transport dimensions: 1700mm x 1800mm x 2320mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, functionality: fully functional, working width: 1,100 mm, grinding width: 1,100 mm, grinding height: 150 mm, type of input current: three-phase, – Made in Germany – Shoes with pneumatic jump (pressure shoe) TECHNICAL PARAMETERS: – Sanding width: 1100 mm – Max. sanding height: 150 mm – Min. workpiece length: 600 mm – Motor power: 2 x 15 kW – Both units with pressure shoes – Pneumatic pressure shoes – Adjustable shoe pressure – Rubber rollers: 70 Shore – Pneumatic oscillation – Cleaning brush – Feed tables with support rollers – Continuously adjustable feed speed – Feed speed range: 4–13 m/min – Extraction port diameter: 3 x 200 mm – Machine dimensions (L/W/H): 250 x 200 x 210 cm – Weight: ~2500 kg Cedpfx Adeyyv Ausrerh

Condition: excellent (used), Catalog number: 7431 TECHNICAL DATA - Maximum width of the workpiece: 950 mm - Maximum height of the workpiece: 150 mm From above: - Metal roller, pressure roller - Unit (grooved rubber roller for calibrating + shoe + metal roller) - Metal roller, smooth, sliding From below: - Traction belt - Pneumatic belt oscillation with photocells - Electric table lifting - 2 feed speed settings - Main motor: 7.5 kW - Feed motor: 0.6 kW - Table lifting motor: 0.18 kW - Operating pressure: 8 bar - Diameter of the dust extraction port: 150 mm - Dimensions (L/W/H): 1600x1250x2000 mm - Weight: 1109 kg ADVANTAGES - German made - Additional shoe included - Used machine, very good condition Net price: 19900 PLN Net price: 4628 EUR, depending on the exchange rate of 4.30 EUR Crjdozw Dibjpfx Adrsh (Prices are subject to change due to exchange rate fluctuations)

Condition: used, Year of construction: 1989, With sanding units consisting of: - 1 calibration roller - 1 combination unit with rigid pad Used Manufacturer: SCM Model: UNO C-CS Year of manufacture: 1989 Cedpsy H N Taofx Adrjrh Machine no.: AE005036 REF.: 030514 Sanding width: approx. 920 mm Pass-through height: approx. 3-160 mm Number of units: 2 pcs., 1x15 kW Units from above: 2 pcs Belt dimensions (L x W): 1525 x 930 mm 2x feed speed: 4.5 / 9.0 m/min 1 pc calibration roller - grooved / rubber-coated 1 pc combination unit with rigid sanding pad - rubber-coated roller Extraction connection: D 2 x 160 mm Required space: approx. 1600 x 1500 x 1800 mm Weight: approx. 1200 kg Location: 97447 Gerolzhofen, free loaded, unpacked Transfer in as-is condition as inspected, without warranty or guarantee

Condition: ready for operation (used), functionality: unexamined, machine/vehicle number: 360192021, working width: 1,350 mm, grinding width: 1,350 mm, overall weight: 5,600 kg, grinding height: 120 mm, power: 29.66 kW (40.33 HP), height adjustment type: electric, type of input current: DC, grinding belt length: 2,620 mm, workpiece height (max.): 120 mm, input frequency: 50 Hz, input voltage: 380 V, operating pressure: 6 bar, workpiece width (max.): 1,350 mm, Roller, shoe, cleaning brush, dust removal, vacuum table. Table height is fixed. Two sanding belts. Crodjz Akplspfx Adreh

Condition: excellent (used), functionality: fully functional, grinding width: 1,350 mm, overall weight: 4,200 kg, Fine and surface finishing sanding machine, Heesemann, Type: FGA 6 For intermediate sanding of painted surfaces, wood smoothing, and sanding of foils. The machine is fully functional, well-maintained, and in very good technical condition. The conveyor belt has been replaced. Sanding width: 1300 mm Working height: 880 mm (constant) Workpiece thickness max.: 3-80 mm Conveyor bed with individual conveyor belts Drive: 2.5 kW three-phase motor, incl. dust extraction system Feed speed: 4.5-22 m/min, adjustable Units: Brush roller unit: Centrally adjustable in height Diameter: 150 mm Drive power: 1.5 kW Bristle material: Fibre Longitudinal sanding unit Infinitely variable, electronic control of the sanding belt speed via frequency converter Wear-free braking system Pneumatic belt tension Intermittent belt extraction system Belt control: Infrared Sanding belt runs in the opposite direction Sanding belt dimensions: 2620 x 1350 mm Belt sanding speed: 0.3 – 12 m/s Drive power: 11 kW Crodsya I Iuspfx Adreh Graphical operator terminal for entering machine setting values, incl. numerical thickness adjustment and display of fault sources, workpiece throughput, and feed speed. Electronically controlled pressure bar Distance between guide rollers: 40 mm Pneumatic belt tension The contact surfaces of the pressure bar automatically adjust to the shape of the workpiece. Workpiece vacuum clamping system: Fan with drive power 5.5 kW Operating side and terminal: left Operating voltage: 400 V; 50 Hz Space requirement: 2550 x 2220 x 2300 mm Weight approx.: 4200 kg (Subject to changes and errors in technical data as well as prior sale)

Condition: excellent (used), Catalog number: 7810 TECHNICAL DATA max. width of the workpiece 630 mm max. height of the workpiece 110 mm 2 units: 1) ribbed rubber roller for calibrating 2) ribbed rubber roller for calibrating + shoe + metal roller *from above: metal sliding feed roller unit metal sliding roller unit sliding roller, metal *from below: Cedszxhihspfx Adrorh 2 metal sliding rollers conveyor belt 2 metal sliding rollers pneumatic belt oscillation 2 types of feed speed motor 2 x 7.5 kW electric table lifting working pressure 6-8 bar diameter of the dust extraction nozzle 2 x 160 mm overall dimensions L/W/H 1650x1060x1970 mm weight 972 kg – Polish production – 2 units – unpainted – very good condition – used grinder Net price: 25,900 PLN Net price: 6,020 EUR, depending on the exchange rate of 4.3 EUR (Prices are subject to change due to significant fluctuations)

Condition: ready for operation (used), Working width 300 mm Mechanical oscillation Shoe Weight approx. 450 kg Crodpeyux Syefx Adreh Star-delta motor start 380 V

Condition: excellent (used), CATALOGUE NUMBER: 6916 TECHNICAL DATA - Max. width of workpiece: 200mm - Max. height of workpiece: 150mm - 2 sanding units: upper – metal roller + shoe + metal roller lower – metal roller + shoe + metal roller from above: - pressure roller, metal - sanding unit - slip pressure roller, metal - cleaning brush - conveyor belt from below: - conveyor belt - 2 slip metal rollers, smooth - sanding unit - pressure roller, metal - cleaning brush Cjdpfx Aozty Npodrjrh - delivery roller - electrically adjustable sanding height - pneumatic oscillation of sanding belts - stepless feed rate adjustment - feed motors 0.55kW - main motors 2x4kW - air consumption 6-8 bar - diameter of dust extraction nozzles 3x80mm, 1x120mm - overall dimensions L/W/H 1800x2070x2000mm, weight 1422kg - Made in Germany, unpainted - Very good condition, used sander Net price: 22900 PLN Net price: 5326 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (price may be subject to change in case of significant exchange rate fluctuations)

Condition: used, Year of construction: 1991, functionality: fully functional, WELL-MAINTAINED, USED BÜTFERING BELT GRINDER FOR SALE! Cedpfxsz A A Svj Adrorh

Condition: excellent (used), Catalog number: 8047 TECHNICAL DATA - max. width of the workpiece: 1100mm - max. height of the workpiece: 160mm – Top: - 2 sliding metal rollers - unit: grooved rubber roller + shoe + metal roller - sliding rubber roller Crsdezx Swpepfx Adreh – Bottom: - sliding rubber roller - conveyor belt - sliding rubber roller - pneumatic belt oscillation - stepless feed speed adjustment - electric machine body lifting - pneumatic brake - total power: 10.5kW - operating pressure: 6-8 bar - diameter of the dust extraction nozzle: 190mm - dimensions (L/W/H): 1470x1540x2000mm – weight: 1260kg ADVANTAGES - Made in Germany - Single-head grinder with a 1100mm wide shoe - Unpainted – used grinder, very good condition Net price: 19900 PLN Net price: 4740 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to exchange rate fluctuations)

Condition: good (used), overall weight: 3,200 kg, type of input current: three-phase, input voltage: 400 V, For Sale: Costa Levigatrici KA CC 1350 Industrial Wide Belt Sander (2004) Cjdpfxozu Sbmo Adrsrh High-performance, heavy-duty wide belt calibrating and sanding machine manufactured by Costa Levigatrici S.p.A. (Italy). Known for its exceptional build quality, reliability, and accuracy in high-capacity woodworking and panel production environments. Key Specifications Manufacturer: Costa Levigatrici S.p.A. (Italy) Model: KA CC 1350 Serial Number: A40506 DR 1 Year of Manufacture: 2004 Working Width: 1,350 mm Aggregates / Heads: 2 Sanding Belts ("CC" Configuration) Total Power: 57 kW Amperage / Voltage: 109 A / 400 V (50 Hz) Total Machine Weight: approx. 3,200 kg Certification: CE Compliant General Overview & Features Capacity: 1,350 mm working width allows for handling large panels, solid wood components, doors, and composite boards. Dual Head Configuration ("CC"): Designed for efficient combined calibrating and finish sanding operations in a single pass. Robust Construction: Industrial-grade heavy-steel frame (3.2 tonnes) ensures vibration-free operation and precise thickness tolerances. Applications: Ideal for solid wood processing, panel sizing, veneer finishing, and lacquer sanding lines. Condition & Inspection Status: Used / Good condition Location: Available upon request Inspection: On-site inspection can be arranged prior to purchase.

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 34271, Machine available November 2026 Sold on behalf of a customer Machine incl. inter-sanding unit Working width 1350 mm Sanding belt length 1900 mm Sanding belt width 1370 mm - combined contact roller sanding head with sanding belt grit adjustment - contact roller 85° Shore - gAE rubberized pressure rollers behind the sanding head - EG 3 electronically controlled segmented pressure bar, element width 30 mm - A 3 3-speed pole-changeable drive motor 7.5 / 10 / 15 Kw (inter-sanding package) (Sanding belt speed 4.5 / 9 / 18 m/s) - BV belt blowing device, workpiece-controlled (inter-sanding package) - belt feed system with control automation for belt centering - feed speed 4 / 8 m/min - RTE roller table at the infeed - RTA roller table at the outfeed - motorized adjustment to workpiece thickness with workpiece thickness preselection via keyboard - RB rotating cleaning brush on the outfeed side (inter-sanding package) Cjdjz Hm Enopfx Adrjrh - additional sanding flap with felt 36 (inter-sanding package)

Condition: good (used), Year of construction: 1989, functionality: fully functional, For sale is an OTT Alpha wide belt sanding machine in a robust industrial design. This machine is ideally suited for calibrating and fine sanding solid wood, veneer, MDF, chipboard, and other wood-based materials. The proven OTT technology impresses with its stable construction and reliable sanding results. Manufacturer: OTT Type: Alpha 110 Wide belt sanding machine Calibrating and fine sanding machine Robust industrial design Dimensions in mm: 1860W x 1970D x 2100H 1100mm working width Max. workpiece thickness 1600, min. 3mm Sanding belt 2150 x 1120mm 4 + 8 m/min feed rate 11 kW motor 10 liters/min Weight: 2500kg Feed belt with rubber pad Sanding unit with wide belt Pneumatic belt tensioning Pneumatic sanding shoe control Control panel with clear machine control Ammeter for load monitoring Pressure gauges for pneumatics Emergency stop switch Large maintenance doors for easy service access Integrated dust extraction connections Solid machine construction for low-vibration operation Ideally suited for: Carpentry shops Joinery shops Furniture manufacturing Cedpfx Ajzrnlvedrerh Interior finishing Door and window manufacturing Series and single-piece production Condition The machine is in used condition with age-related signs of wear. It comes from a carpentry shop and impresses with its robust industrial quality. Inspection and trial run are possible at any time by appointment. Transportation is possible for an extra charge! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, intermediate sales and changes reserved. All information without guarantee.

Condition: ready for operation (used), Year of construction: 1994, Wide Belt Sander HEESEMANN KSM 8 CSD incl. EA2 Year of manufacture: 1994 Cjdpfx Ajx N A Aaedrjrh Condition: Used - ready for operation Description Wide Belt Sander Condition: Function tested – Working width: 1300 mm – Cross sanding unit with belt blowing device – Longitudinal sanding unit with infinitely variable speed and belt blowing device – Calibration roller, can be engaged via the control system – Vacuum conveyor belt – feed speed infinitely variable – Satin finishing roller – Brush roller – Machine settings and pressure control system CNC controlled - EA dedusting machine, high-pressure blow-off unit with rotating nozzles and ionization for statically charged dust Location: ex stock 54634 Bitburg - Immediately available - Free loaded