Used Sidel Sbo 6 for sale (49,571)

Condition: like new (used), functionality: fully functional, machine/vehicle number: SBO 6/10, Sidel Stretch Blow Moulding Machine Max. output: 6.000 bottles/hour. Max. bottle size: 3.000 cc. Blow stations: 6. Machine is in very good conditioning and well maintained. GENERAL INFORMATION The SBO 6/10 has 6 molds and 10 heating modules. Will work with a wide range of bottle sizes and styles from 0.25 to 3 liters. Sidel 2-step ^PET stretch-blow molders require previously manufactured preforms be supplied to the machine. Separating the bottle manufacturing and preform manufacturing processes allow production to be optimized, provide greater flexibility of operation and use, and provide higher production output rates and yield. MAXIMUM PREFORM DIMENSIONS Neck height 9 – 41 mm (measured from bottom of support ring) Minimum inside diameter of neck 19 mm Maximum outside diameter of neck 34 mm Preform support ring diameter 29 – 51 mm Maximum preform length 210 mm MAXIMUM BOTTLE DIMENSIONS Maximum bottle diameter 130 mm Maximum bottle height 380 mm Bottle capacity 0.25 – 3 liters AVERAGE PREFORM WEIGHTS (non carbonated and carbonated liquids) 0.25 liter bottle 14-20 grams 0.50 liter bottle 20-33 grams 1.00 liter bottle 26-40 grams 1.50 liter bottle 35-51 grams 2.00 liter bottle 44-58 grams 3.00 liter bottle 68-84 grams BLOW WHEEL Height 3.5 meters Number of molds 6 Closing force 10 tons Item height (under neck) at outfeed 1.4 meters approximately Machine DC drive motor power 4 KW HEAT CONDITIONING Height 2 meters Number of oven heating units 10 Hjdpfjg Ailcjx Ab Tjt Number of heating zones per unit 8 Maximum power 170 KW ELECTRICAL USAGE Maximum supplied power 200 KW Average consumption 100-150 KW/hr (varies per bottle being produced) COMPRESSED AIR Supplied power from 7-35 bar Pressure 7 bar Flow rate 50-100 Nm3/hr (varies per bottle being produced) Blow pressure – champagne base up to 25 bar Blow flow rate – champagne base 110-550 Nm3/hr Blow pressure – petaloid base up to 35 bar Blow flow rate – petaloid base 155-770 Nm3/hr CHILLED WATER Temperature 10-12 degrees Centigrade Pressure 5-6 bar Flow rate up to 6 cubic meters/hour Kcal to be removed up to 16,000 Kcal/hour WEIGHT Blow wheel with molds 8 tons Heat conditioning unit 2.2 tons Preform feeder 0.65 tons Electrical cabinet 0.85 tons PREFORM HEAT CONDITONING The preforms are transferred neck up to the heat conditioning device. This unit continuously insures the preforms are inverted before passing, neck down, in front of the heating units and then inverts them again. During the heating phase, the preforms are rotated and their necks protected from the heat in order to optimize the distribution of heat without deforming the neck. Heating is insured by 10 heat modules. Each unit can accommodate up to 8 infrared lamps stacked horizontally whose ends are air cooled. The heating power of 8 zones, corresponding to the 8 rows of lamps, can be controlled in order to optimize the heat profile. These zones are regulated on all SBO Models. After heating, a control by infra-red camera of preform temperature enables regulation of the zones under control, thus insuring maintenance of the required temperature.

Condition: used, Speed: 8.000 bph with 0,5 liter bottle. Different formats are possible optionaly. Dismanteling is made by Seegräber GmbH on begining februar 2018. List of machines included: -SIDEL SBO 6 Blowing machine. Completly overhault by SIDEL in 2006. -Preform magazin and preform elevator Hodpfx Ajxytvieb Tst Compressor, cooling, moulds not included

Condition: used, Year of construction: 1998, Automatic PET bottle blowing machine Manufacturer: SIDEL Type: SBO 16/16 S1 Year of manufacture 1998 Capacity: 16,000 for 1.5 L bottles and up to 19,000 bph for 0.5 L bottles Hjdpeutni Rofx Ab Tjt Installed power: 347 kW Includes 1.5 L moulds Preform feeder Chiller cooling unit Technical condition: used machine, functional until dismantled. The machine is currently dismantled, assembled in elements and prepared for transport. Full and original technical documentation.

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, product height (max.): 380 mm, workpiece diameter (max.): 130 mm, production capacity: 7,200 unit/h, TECHNICAL DETAILS Hjdpsx A Uu Ejfx Ab Tst Number of cavities: 6 Capacity with standard bottles: up to 7,200 bph Product formats Bottle volume: 0.25 – 3.0 L Max. bottle height: 380 mm Max. bottle diameter: 130 mm Preform dimensions Max. preform length: 210 mm Neck inner diameter: 34 mm MACHINE DETAILS Dimensions & Weight Blow module dimensions: 2,000 x 2,200 x 2,200 mm Blow module weight: 8,000 kg Oven dimensions: 3,000 x 1,100 x 2,100 mm Oven weight: 2,000 kg Control cabinet dimensions: 1,500 x 1,000 x 2,100 mm Control cabinet weight: 1,000 kg Transformer 415V / 380V dimensions: 1,000 x 500 x 2,000 mm Transformer weight: 500 kg Preform hopper and conveyor dimensions: 3,000 x 1,500 x 3,500 mm Preform hopper and conveyor weight: 600 kg Preform feeder dimensions: 2,000 x 2,500 mm Preform feeder weight: 250 kg Infeed guide rail length: 2,000 mm Power supply Total power: 142 kW Mains connection: 380/420 V +/- 10%, 50 Hz +/- 1% Cooling water Cooling capacity: 16,000 kcal/h Water temperature: 10 – 12°C Flow rate: up to 6.0 m³/h Water pressure: 5 – 6 bar Compressed air Service air pressure: 7 bar Service air flow: 50 – 100 Nm³/h Blowing air pressure: up to 35 bar Blowing air flow for 0.25 – 3.0 L: 155 – 770 Nm³/h EQUIPMENT Transformer 415V / 380V Preform hopper and conveyor Preform feeder Infeed guides Adaptation to other voltages possible

Condition: used, Year of construction: 1998, Overview This machine was built in 1998 by French manufacturer Sidel. The machine is in very good working condition, is already professionally dismantled and stored in a warehouse. It is already packed in seaworthy export crates. Techn. Details - Capacity: 7.200 bph in 1,5L - Number of moulds:  6 (molds not included) - Equipped with quick change for shell molds - Number of heating modules: 10 modules - Neck personalization: 29/25      - Working hours: 47.000 only         - Machine was regularily maintained       - Retrofitted by the previous owner in 2020 - Machine equipped with:            - Sidel preforms elevator to unscrambler - Sidel preforms unscrambler & feeder - Sidel oven & blowing wheel for 6 molds - Sidel electrical cabinet - Sidel PCC drive & control panel Hjdsrkgy Ujpfx Ab Tot - Big set of spare parts list upon request

Condition: used, Year of construction: 1992, Automatic PET bottle blowing machine Manufacturer: SIDEL Type: SBO 4 S1 Year of prod. 1992 Capacity: 4,000 for 1.5 L / 2 L bottles Installed power: 150 kW Hodpfowa Rhrjx Ab Tjt Includes 1.5 L molds Preform feeder Technical condition: used machine, starts up, program is functional

Condition: used, Year of construction: 1992, Overview This blowmoulder was built in 1992 from French manufacturer Sidel. It can produce up to 4.000 bottles per hour. Techn. Details Capacity: 4.000 bph 4 cavities Scope of delivery Blowmoulding machine | SIDEL | SBO 4/6 | 1992 Preform feeder Two types of molds for 1.5 L and 2.0 L bottles Cooling unit: RIEDEL Hjdenpbhvspfx Ab Tst

Condition: used, Year of construction: 2008, Used Combiblock Sidel SBO 20 Universal 36000 bph Hsdevgu D Sopfx Ab Tet The Used Sidel SBO 20 Universal Combiblock 36000 bph is an integrated bottling system, combining a blower and a filler/capper in a single unit. This machine is designed for the production of PET bottles, with a production capacity of up to 36,000 bottles per hour. The Sidel SBO 20 Universal blower features 20 cavities, allowing efficient and continuous production. The system includes a preform feeder with a hopper and a preform unscrambler, ensuring a constant flow of material in the production process. The Europa WM 60 filler/capper is integrated into the Combi block, optimizing space and reducing transfer times between the blowing and filling stages. This compact design improves operational efficiency and minimizes the risk of contamination. The system has been used for bottling natural mineral water in 0.5-liter formats, with a 26.6 mm Alaska-type neck customization. The machine pitch is 113 mm, adapting to specific production needs. Currently, the machine is in storage, ready to be installed and put into operation in a new production facility. A complete inspection is recommended before start-up to ensure optimal performance. The required power supply is 400 V at 50 Hz, standard in many industrial plants. The immediate availability of the Combi system represents an opportunity for companies looking to quickly increase their production capacity.   Advantages of the Combi system over a traditional system The Combi system, like the Used Sidel SBO 20 Universal Combiblock 36000 bph, offers numerous advantages over traditional systems, which use separate machines for blowing, filling, and capping. Firstly, the compact design drastically reduces the space occupied in the plant, allowing companies to optimize available space and, in many cases, reduce infrastructure costs. Moreover, the Combi system eliminates the need for intermediate conveyors and accumulation zones between stages. This layout simplification reduces maintenance costs, lowers the risk of jams or breakdowns along the production flow, and improves the overall line efficiency. The absence of intermediate steps also reduces the possibility of contamination, a priority especially in the food and beverage sector. The integrated process between blowing, filling, and capping shortens production times as the operations proceed continuously and without interruptions. This contributes to increasing the overall line speed and hourly production capacity. Higher efficiency translates not only into increased productivity but also into a significant reduction in energy consumption and operating costs. Additionally, the Combi system requires fewer personnel for line management and supervision, as a single control unit allows all operations to be monitored from a centralized interface. This simplifies operational procedures and makes quality control easier throughout the process.

Condition: used, Year of construction: 2000, Overview  This PET blow-moulding machine was manufactured in 2000 by French company SIDEL. The machine is currently in good working condition, running in production until the end of November 2025. It will be dismantled and craned out through the roof, with craning scheduled for December 2025. It becomes available after dismantling. Technical data - Capacity: Hodpfx Absyb Tbpo Tjt - 7,600 bph on 1.0 L - Formats: - Neck finish 29/21 - Preforms processed: RPET Plastipak & Resilux - Number of moulds: - 6 (moulds not included) - Equipment & Features: - Quick change for shell molds - Sidel caterpillar oven - 6 heating modules - Sidel preforms tipper - Sidel preforms hopper & feeder - Sidel preforms infeed rail - Sidel caterpillar oven & blowing wheel - Solenoid valves Sidel Universal type - Sidel PCC version V2.02 - Sidel CE electrical cabinet (Siemens) - Service history: - Sidel maintenance completed September 2024 - Elongation sensor retrofitted - Additional service by client’s technicians Scope of Delivery  - Stretch blow-moulder SIDEL SBO 6 Series 2 - Preforms tipper - Preforms hopper & feeder - Preforms infeed rail - Caterpillar oven & blowing wheel

Condition: used, Year of construction: 1999, - PET-Blow moulding machine, make Sidel, type: SBO 16 with preform tipper, preform feed, unscrambler, preform transport, built 1999, already dismantled, ex location for sale. Hjdpforazwrjx Ab Tst - PET-Blow moulding machine, make Sidel, type: SBO 20, with preform tipper, preform feed, unscrambler, preform transport, built 1999, already dismantled, ex location for sale.

Condition: used, Year of construction: 1998, Overview This SIDEL SBO 10/14 Series 1 is a rotary PET stretch blow moulding machine with 10 blowing stations, producing up to 12,000 bottles per hour. It has been used for the production of 1.5 L and 2.0 L PET water bottles with PCO 1810 neck finish. The machine is still installed and in production, can be visited in operation, and is available for immediate sale. Technical data - Manufacturer: SIDEL - Model: SBO 10/14 Series 1 Hodpfxszrhr Ae Ab Tot - Machine No.: 688 - Year of manufacture: 1998 - Machine type: rotary stretch blow moulding machine for PET bottles - Blowing stations: 10 - Capacity: up to 12,000 bph - Formats: 1.5 L and 2.0 L PET bottles - Neck finish: PCO 1810 - Installed power: 310 kW - Electrical supply: 400 V / 470 A Condition Used - in production, still installed and under power. The machine remains a reliable solution for water, beverage and other PET packaging applications. Availability Immediately available. Location: Slovenia. Dismantling, handling, packing and truck loading can be quoted on request (EXW).

Condition: used, Year of construction: 2013, machine/vehicle number: PAL62, Used SIDEL monocolumn Palletizer 200 Unit per hour -Year 2013Technical Specifications & Performance DataThe Sidel Monocolumn palletizer is an automatic palletizing solution designed for the efficient end-of-line handling of PET bottles in industrial packaging and beverage production environments. Built in 2013, this machine is configured to process a current bottle format of 2.0L and can reach a maximum performance of 200 layers per hour.Manufacturer: SidelModel: MonocolumnManufacturing year: 2013Container material: PETCurrent format: 2.0L bottlesMaximum capacity: 200 layers per hourSupported pallet: Eur-EPAL 800x1200 mmInstalled power: 73 kWWorking plane height: 800 mmAdvanced Automation & Control SystemsThe palletizer is controlled by a Siemens PLC, providing dependable automated coordination of palletizing movements and end-of-line material handling. The electrical system is configured for three-phase operation, with a rated voltage of 390 V and a frequency of 50 Hz. Full-load current is rated at 60 A.An automatic layer-sheet inserter is included. This system places interlayer sheets between product layers to improve load separation, support pallet stability, and protect packaged PET bottles during handling and transport.Production Line Integration CapabilitiesThis automatic palletizer is suitable for integration at the end of a used bottling line, after secondary packaging equipment such as shrink wrappers, case packers, or bundle handling conveyors. It is designed to stack packaged PET bottles onto Eur-EPAL pallets measuring 800x1200 mm.Its application is appropriate for beverage production lines handling natural water, carbonated water, soft drinks, milk, beer, wine, spirits, oil, and preserved products. The Monocolumn configuration supports organized pallet formation for industrial packaging operations where reliable transfer from packaging machinery to warehousing or dispatch is required.Machine Condition & Maintenance HistoryThe machine is reconditioned and ready for operation. It is supplied with a 6-month warranty and compatible spare parts are available. This second hand palletizer is intended for buyers seeking a prepared end-of-line solution for integration into an operating production line.Before installation, the purchaser can verify the selected pallet pattern, product pack configuration, conveyor interfaces, and layer-sheet specification to ensure compatibility with the intended packaging process.Operational Performance & VersatilityThe Sidel Monocolumn palletizer handles PET bottle packs and provides automatic layer formation and pallet stacking. The integrated layer-sheet application system is particularly useful where stable, separated pallet layers are required for storage and transport.With a maximum output of 200 layers per hour, the machine supports efficient downstream handling in beverage production and other packaged-product applications. Its automated operating concept helps maintain a consistent palletizing process while reducing manual pallet-loading activities.Installation Requirements & Site PreparationIn... Hedpfxezvprro Ab Tot

Condition: new, Parts for the SIDEL blow molding machine bearings O ring nozzle strap sealing Hjdpfx Ajiqum Iob Tot axis

Condition: used, Year of construction: 2004, machine/vehicle number: SO137, Used Sidel Combiblock for PET 18000 BPHTechnical Specifications & Performance DataThe Sidel Combiblock is a synchronized blow-fill-cap monoblock engineered for high-efficiency, reliable, and high-quality container production within used bottling lines and industrial packaging environments. Built in 2002, this integrated system combines a rotary PET blow molder, a high-precision gravity filler, and a robust capping turret into a single space-saving frame. The blowing section features 16 cavities for continuous operation and is equipped with an air recovery system to improve energy efficiency. The filling zone includes a pressurized clean cabin with filters, while the capping system handles advanced tethered closure profiles. Please note that molds are not included and a chiller is not supplied with the machine.Manufacturer: Sidel / Arol Combi Model: SBO 16 Series 2 (Blower) + Sidel ALSIM (Filler) + Arol (Capper) Year: 2002 Machine type: Synchronized Combiblock (Blow-Fill-Cap) Container material: PET Blower Cavities: 16 (molds not included) Blower Type: Rotary Neck finish set: Alaska Air Recovery System: Included Chiller: Not included Filler Valves: 63 mechanical valves Filling Type: Gravity filling Rotation Direction: Counter-clockwise Hygienic Enclosure: Pressurized cabin with air filters Capper Heads: 12 heads Cap Distribution System: Pick & Place Supported Caps: Plastic pre-threaded caps (GRAVITY and HEXALITE TETHERED GME30.28 NCB PT 1.00g - drawing available) Machine Condition: Fully overhauled at the end of 2024Advanced Automation & Control SystemsThis rotary platform supports steady, continuous motion for stable heating, blowing, and filling cycles. The isobaric gravity filling system utilizes 63 mechanical valves to ensure low-turbulence filling, while the integrated pressurized cabin with air filters guarantees a clean environment for sensitive beverage production. Integrated machine controls streamline changeovers and monitoring, while the air recovery system enhances sustainability and lowers compressed air consumption. Quick adjustments for the Alaska neck finish and the specialized Arol pick-and-place cap distribution system reduce downtime across multi-format industrial packaging operations.Production Line Integration CapabilitiesThe Combi system is designed for seamless integration into a complete beverage production line. By combining the Sidel SBO 16 blower, the ALSIM 63-valve gravity filler, and the Arol 12-head capper into a single monoblock, it eliminates intermediate air conveyors, reducing footprint and container scuffing. It pairs effectively with downstream packaging machinery and can operate inline with main conveyors, inspection systems, and labeling equipment. The machine is well suited for PET bottle handling and can be configured for a range of bottle sizes depending on installed molds and process parameters.Machine Condition & Maintenance HistoryThe complete Combi configuration was fully overhauled and refurbished at the end of 2024, supporting reliable, ready-for-operation performance for used bottling line projec... Hjdpfx Ajzccgdsb Tet

Condition: used, mileage: 580 km, power: 66 kW (89.73 HP), first registration: 05/1962, fuel type: diesel, number of seats: 22, gearing type: mechanical, color: beige, Year of construction: 1962, Available in multiple colors (yellow/red/green), built between 1957 and 1964. We also have 8 restoration projects ready to start immediately. Hedpfxozn Hple Ab Tjt Features: 8 sleeping seats or 20 seating capacity * Double tour guide seat * Large club lounge for 8-seat configuration Length: 6,650 mm Width: 2,250 mm Permissible total weight: 6,200 kg Complete restoration Henschel engine Steering wheel manual transmission Roof luggage rack German historic (H) registration, passenger coach - Rental for your event possible. Europe-wide delivery available with our vehicle transporters. We have a wide selection of classic Setra buses: S6, S7, S9 to S14, Mercedes O 319 and O 3500, Saurer bonnet buses. We make shipment worldwide. Net price: 165,000.00 Euro

Condition: excellent (used), SIDEL / HEMA SF Classic MV2 Volumetric Filler SIDEL / HEMA SF Classic MV2 automatic volumetric filler, designed for the precise dosing and filling of food products into containers within continuous industrial production lines. The equipment uses a volumetric filling system, allowing control over the amount of product introduced into each container and maintaining uniform dosing throughout the production process. The SF Classic MV2 incorporates a product feeding hopper, automatic container transport, and a control system with a Siemens HMI, offering an automated solution for professional filling applications in the food industry. MAIN FEATURES -Manufacturer: SIDEL / HEMA -Model: SF Classic MV2 -Type: Automatic volumetric filler -Volumetric dosing system -Automatic product feed -Integrated product hopper -Automatic container handling -Integrated infeed and outfeed conveyor -Automatic container positioning -Control panel with Siemens HMI -Construction primarily in stainless steel -Perimeter safety guards -Designed for continuous industrial operation -Integrable into automatic filling and packaging lines APPLICATION The SIDEL / HEMA SF Classic MV2 is designed to automatically dispense a controlled volume of product into each container. The product is fed from the top hopper to the volumetric system. The containers arrive automatically via the conveyor, are positioned in the filling area, and receive the set amount of product before continuing to the next stage of production. Hodpfxszw Dgys Ab Tst This system is particularly suitable for applications where dosing consistency, automated filling, and continuous operation are required. It can be integrated with: Product feeders Container conveyors Seamers and cappers Can closers Cap feeders Weight checkers Inspection equipment Labeling and coding machines Packaging equipment and end-of-line equipment Complete automatic filling lines APPLICATIONS Especially suitable for canning industries, food manufacturers, sauce producers, food preparation companies, and other processing plants that require an automatic volumetric filling system. Depending on the installed configuration, it can be used for different liquid, semi-liquid, viscous, or particulate food products, adapting to the specific product and container format. The combination of SIDEL / HEMA technology, volumetric dosing, and automatic container handling makes the SF Classic MV2 a particularly interesting solution for continuous industrial filling lines. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, Year of construction: 2005, Overview This SIDEL FILLING S.r.l. E-JET 40 is a rotary rinser for glass bottles, equipped with 40 rinsing valves (pitch 113 mm). It currently operates within a complete cider filling line and handles glass formats from 25 cl to 1.5 L. A separate water filtration system with manifold piping, pressure gauges and manual valves is included. The machine is enclosed in stainless steel framing with transparent safety guards and features rotary bottle handling with starwheel transfer. It is still installed and under power, remains in production until end of October 2026, and can be visited in operation on request. Hodpezidx Hefx Ab Tst Technical data - Manufacturer: SIDEL FILLING S.r.l. (Parma, Italy) - Model: E-JET 40 - Year of manufacture: 2005 - Machine type: rotary bottle rinser, glass - Rinsing valves: 40 (pitch 113 mm) - Products: cider, carbonated beverages - Formats: 25 cl / 27.5 cl / 33 cl / 50 cl / 75 cl / 100 cl / 150 cl - Capacity: up to 18,000 bph (0.33 L), approx. 14,000 bph (0.75 - 1.0 L) - Dimensions: approx. 290 x 240 x H 230 cm - Weight: approx. 3,400 kg - Power: 6.5 kW installed (400 V, 50 Hz) - Air: 6 bar operating, approx. 100 Nl/min - Water: 3 bar, approx. 2,500 l/h Equipment - Water filtration system with manifold piping, gauges and manual valves - Spare parts package - OEM technical documentation and machine layout drawing Condition Used - in production, still installed and under power. Last major maintenance: April 2026. Availability From end of October 2026 (week 43). Location: France. Dismantling, handling, packing and truck loading can be quoted on request (EXW).

Condition: used, Year of construction: 2007, Overview This complete PET bottling line was built by leading European manufacturers including Sidel, Sacmi and Sarcmi. It is designed for still and sparkling water and is also suitable for soft drinks. With a nominal output of 19,000 bottles per hour for 0.5 L and 16,000 bottles per hour for 1.5 L, it covers the full process from preform blow moulding through filling, labelling, shrink wrapping and palletizing. The core of the line is a Sidel SBO Universal 14 blow moulder (2007) feeding a Sarcmi Azzurra 70-14 isobaric filler and a Sacmi Opera 200 RF rollfed labeller. Technical data - Line type: Complete PET bottling line - Different manufacturers: Sidel, Sarcmi, Sacmi, Zalkin, Zambelli, Comag, Acmi, Robopac - Years of manufacture: 1986 - 2019 - Nominal output: 19,000 bph (0.5 L); 16,000 bph (1.5 L) - Product: still and sparkling water, also suitable for soft drinks - Container: PET bottles 0.5 L and 1.5 L - Cap: Alaska PCO 1881 - Label: OPP rollfed - Packaging: shrink film - 0.5 L 3x2 and 4x3, 1.5 L 3x2 - Palletizing: Euro pallet 800 x 1200 and 800 x 600 Scope of Delivery - Blow Moulder | Sidel | SBO Universal 14 | 14 cavities; incl. Lanfranchi preform tilter, hopper and air recovery system | 2007 - Air Conveyors | NTS | Double chamber, approx. 60 m, 2 air fans - Filler | Sarcmi | Azzurra 70-14 | 70 isobaric filling valves, pitch 110 | 1988 - Capper | Zalkin | 14 capping heads | 1988 - Saturator | Rivi Eng | Carborivi | 30,000 L/h | 1986 - Labeller | Sacmi | Opera 200 RF | OPP rollfed, 18 plates, non-stop automatic reel change | 2011 - Cap Ink Marker | Linx | 8900 | marking on bottle cap | 2019 - Shrink Wrapper | Zambelli | LFT70 | single track with 1-to-4 track channelizer | 2004 - Handle Applicator | Comag | H 65/1 | cardboard handle, single track | 1999 - Palletizer | Acmi | Rasar P130 | double-head, incl. pad and pallet magazines | 1996 - Pallet Wrapper | Robopac | Genesis | ring wrapping, pallet presser, waterproof covering | 2000 - Conveyors | Procomac / Comag | bottle and pack conveyors, SEW / Selpee motors, Procomac cabinet with Pro-face touch panel Condition Used line, well maintained with extensive annual overhauls by the manufacturers. Currently still installed and under power. The line can be viewed on request. Availability Hodezlqzmspfx Ab Tot Available from 12 October 2026. Location: Italy.

Condition: ready for operation (used), Year of construction: 2003, operating hours: 28,000 h, functionality: fully functional, turning diameter: 309 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 89 mm, travel distance Z-axis: 406 mm, controller model: Fanuc Typ 18i-T, TECHNICAL DETAILS Hjdpfx Ajzu Rz Ejb Tjt Maximum turning diameter: 309 mm Spindle speed range: 25 – 6,000 rpm Travel in X-axis: 89 mm Travel in Z-axis: 406 mm Collet diameter: 42 mm MACHINE DETAILS Control system model: CNC Fanuc Type 18i-T Spindle motor drive power: 11 kW Operating hours: 28,000 h Machine weight: approx. 5,000 kg EQUIPMENT C-axis Y-axis 12-station turret VDI 30 Powered tools at each station Power chuck, diameter 140 mm Hydraulic steady rest Workpiece collection system Chip conveyor Coolant system

Condition: used, Year of construction: 2010, Overview This PET filling line was manufactured between 1996 - 2019 by several European manufacturer. The line is designed for carbonated beverages such as lemonades and also suitable for water with or without CO₂. With an output capacity of 14.000 bph, it offers a complete solution from bottle blowing to palletizing. This equipment is in good condition and still fully operational.   Technical Data - Capacity: 14.000 bph - Filling product: carbonated water and soft drinks - Packaging formats: shrink wrapping without tray - Pallet: Euro pallet (1.200 x 800 mm)  - condition: good technical condition, still in production Scope of Delivery Blow moulding machine | Sidel | SBO10 | 2010 Elevator preform | Sidel | 2010                                                                                                                    Hedpfjyb Tuijx Ab Tet Air conveyors | Sidel-Alsim | 1999 Rinsing/Filling/Capping | Sidel-Alsim | 48/60/10 | 1999                                                                                           Mixer | Sidel-Alsim | 1999 Bottle dryer | ACI | 2015 Shrink wrapping machine | Acmi | 2019 Handle applictaor | SMI-Pack | 2002 Conveyors for bottles and trays | Sidel-Alsim | 1999 Palletizer | Alsim | 1996                                                                                                                                                Pallet wrapper | PM Pragometal #1 | 2009 Pallet wrapper | PM Pragometal #2 | 2009

Condition: used, axle configuration: 3 axles, first registration: 12/2003, color: other, Year of construction: 2003, Empty weight: 6.500 kg Axle 1: left 10 mm right 16 mm Axle 2: left 10 mm right 10 mm Axle 3: left 10 mm right10 mm Hjdpfsx Elfisx Ab Tet We have the possibility to stack trailers! 

Condition: used, Year of construction: 2002, functionality: fully functional, Tapping Machine HAGEN & GOEBEL type HG-6 Year of construction: 2002 Spindle travel: 50 mm Hsdpezxfbnofx Ab Tst External spindle cone: B12 Rotation: from 355 to 1800 RPM Rotation right / left Throat depth: 120 mm BILZ Quick Attach Voltage: 380 V Width: 400 mm Depth: 600 mm Total height: 800 mm Weight: approx 100 kg

Condition: used, Year of construction: 2009, Overview  This rotary roll-fed labelling machine was manufactured in 2009 by France SIDEL. The Rollquattro F15 18T is designed for roll-fed labelling of PET bottles in beverage production lines. The machine operates with a rotary system with 18 bottle plates and is configured with mechanical cam control and manual label splicing.  Technical data - Capacity: approx. 18,000 bottles/hour - Formats: 0.5 L / 1.0 L / 1.5 L / 2.0 L - Application: Roll-fed labelling of PET bottles - Configuration: Rotary machine with 18 plates, mechanical cam drive, manual label splicing - Utilities: 400 V / 50 Hz / 23 kW / 46 A Scope of Delivery  - Labelling machine | SIDEL | Rollquattro F15 18T | 2009 | Rotary roll-fed labeller with 18 plates - Cooling unit | Kelvin Cool-Power | External cooling unit - Control system | Control panel with process indicators Hjdsyyb Snepfx Ab Tjt

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: ab/174978, overall weight: 2,950 kg, total height: 1,650 mm, total width: 1,700 mm, rotational speed (max.): 6,000 rpm, planing width: 230 mm, input voltage: 380 V, number of blades: 4, total length of planing tables: 4,700 mm, type of input current: three-phase, year of last overhaul: 2023, actuation type: electric, Equipment: CE marking, documentation/manual, four-sided planer SCM Superset XL Comp 6 Hjdpfxjzwf Eke Ab Tot documentation available, minimum/maximum planing dimensions width 25 to 230 minimum/maximum planing dimensions height 6 to 120 1x planing spindle 10 hp, sanding spindle 10 hp, width spindle 10 hp, thickness spindle 15 hp, additional spindle 10 hp, universal spindle 10 hp including planing heads/quick-change system, infeed table 2500, automatic height and width adjustment, with memory capacity for 99 programs manual central lubrication system, Waxelite pump, including dust extraction pipes up to and including automatic sliding dust collector year of manufacture 2005, machine available for pick-up, currently available, price €17,500 excluding VAT

Condition: refurbished (used), Year of construction: 2016, operating hours: 20,169 h, functionality: fully functional, machine/vehicle number: 512822, overall weight: 51 kg, load capacity: 6 kg, arm reach: 706 mm, This is a KUKA KR 6 R700 WP industrial robot with a KRC4 controller, manufactured in 2016. This robot has been fully overhauled! The controller includes the following options: KUKA.CPC KUKA.Platform Hodezwfmzspfx Ab Tot BoardPackage ExpertTech KUKA.PROFINET MS KUKA.UpdatePackageFirmware KUKA.UpdateService KUKA.UpdateServiceConfiguration