Used Single Spindle Copy Milling Machine for sale (72,080)

Condition: used, Copy milling machine, copy milling machine, hand lever milling machine, hand lever milling machine -Copy router: Wegoma SK6 -Copy router: swiveling -with support rail length: 1910 mm -Motor: 220 V 1.4 kW Kedpfx Akod Skkvjwsdt -Spindle speed: 22000 rpm -Dimensions: 500/460/H1530 mm -Weight: 46.5 kg

Condition: used, Copy milling machine, copy milling machine, hand lever milling machine, hand lever milling machine -Manufacturer: Elu, copy milling machine type AS 70 -Milling length: 365 mm -Milling width: 100 mm -Milling stroke: 45 mm -Motor: 220/380V 740W Kdsdpfjif Huvjx Akwet -Spindle speed: 12000 rpm -Dimensions: 800/750/H1320 mm -Weight: 108kg

Condition: used, Year of construction: 2010, machine/vehicle number: 1780021340, Order No. 26305 Three-spindle copy milling machine Technical data: - Operation via two-hand lever Ksdpfozxc Swex Akwjdt - Material clamping via pneumatic clamping cylinder - Workpiece width / clamping range B 115 x D 100 mm - Milling area above, to stop / copy template B 340 x D 100 mm - Stroke above D 110 mm - Milling area below, to stop / copy template B 240 x 90 mm - Stroke below, front / rear 95 / 45 mm - Spindle speed 12000 rpm - Metering spray device - Air consumption per working cycle - Without spraying 12 liters - With spraying 24 liters - Left + right original material support - Drive 400 V / 0.75 kW - Space requirement approx. B 900 x H 1400 x D 1250 mm - Weight approx. 300 kg

Year of construction: 1980, condition: good (used), Copy milling machine, copy milling machine, hand lever milling machine, hand lever milling machine Ksdpfegfcm Ajx Akwodt -Area of application: Processing of aluminium and steel profiles -with 1 vertical and 1 horizontal milling motor -per engine: 0.74 kW 12,000 rpm -Installation dimensions 2800/1100/H1630 mm -Transport dimensions 800/1200/H1630 mm -Weight: 270 kg

Year of construction: 2002, condition: excellent (used), functionality: fully functional, ELUMATEC KF 178 – 3-Spindle Copying Router Technical Data Upper Routing Unit Routing area with stops or copying templates: 340 × 100 mm Stroke: 110 mm Lower Routing Unit Routing area with stops or copying templates: 240 × 85 mm Front stroke: 95 mm Rear stroke: 45 mm General Data Continuously adjustable speed from 3,000 to 12,000 rpm. Also suitable for thin-walled steel and stainless steel profiles. Clamping range for profiles: 115 × 100 mm Mains connection: 230/400 V, 3 ~, 50 Hz Motor power per spindle: 0.74 kW Compressed air connection: 7 bar Air consumption per working cycle: 12 l without spray device 24 l with spray device Dimensions (L × W × H): 980 × 1,250 × 1,610 mm Weight: 360 kg Equipment Ideal machine for economical door production. For routing lock cases, profile cylinders and rosettes in aluminum and PVC profiles. Three fully independently operating copying routing units. Separate control of the horizontal and vertical routing spindles. Workpiece clamping upwards against the lock assembly surface, eliminating the need for readjustment with different profile heights. “Spindle Lock” for quick tool changes. Flexible stop system with support rollers and adjustable folding stops. Ksdpfszcz Dnsx Akwjdt Profile cylinders and rosettes.

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Knee Travel: Z - 406mm Quill Travel Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Kdsdpfsxxb Rrjx Akwot Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK RMX Control YOM 2021 Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 £35,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Kdjdex D Tbmepfx Akwot Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Year of construction: 2009, condition: used, Drive with 3 milling motors ensures a very stable structure (steel profiles can be machined from 3 sides in a single clamping). Locking mechanism for the lift of the horizontal motors prevents profiles from being scratched when inserting and removing them. Processing of profile widths up to 300 mm possible (e.g., mailboxes) using only the vertical milling motor. Specification: - Equipped with 1 vertical and 2 horizontal milling motors - Pneumatic workpiece clamping with 2 horizontal clamping cylinders Kodpfoy Nm Ersx Akwsdt - 3 pneumatic spray nozzles - Milling area of the vertical motor (L x D): 365 x 230 mm - Milling area of the horizontal motors (L x H): 250 x 100 mm - Maximum profile height: 150 mm - Operation via switches and 4 hand levers

Condition: excellent (used), Year of construction: 2002, High-quality copy lathe, woodturning lathe with milling unit, PLC-controlled. A video of the machine in operation can be sent upon request. PLC-controlled wood copy lathe for turning and milling. The machine has two controlled axes: the longitudinal axis and the rotary axis. Input of various feed rates and corresponding lengths for turning, as well as additional divisions and pitches for milling. Several programs for turning and milling operations can be stored. Hydraulic copying of a pattern or template. The roughing and copying tools are equipped with fine adjustments. Template adjustment is possible from the front and rear via fine-pitch spindles. The copying length can be divided into up to 6 sections with different feed rates for turning highly contoured workpieces. Drive motor 400V / 3kW with electric motor brake. Two speed stages adjustable via V-belt, within each stage, operation can be continuously adjusted via a frequency inverter. Speed stage 1: 200 - 2000 rpm Speed stage 2: 350 - 3400 rpm Distance between centers approx. 1550mm Copying length with steady rest approx. 1350mm Bed length approx. 2100mm Feed adjustable continuously, rapid traverse with safety end stop. Kdjdpfxjzfwm No Akwet Hydraulic copying slide with V-turning tool. Spindle with M33 thread and MK3 internal taper. Tailstock MK3 and with quick-release mechanism. Extensive accessories: Ring steady rest with front turning tool and insert guide. Four-jaw steady rest. Four-jaw chuck 125mm. Copying tools, center points, hexagonal drive, etc. Milling unit with 3kW motor for mounting on the copying slide. 5 milling heads available, only the 16mm collet is missing. CE marking Operating manual V-belt new Original paint, only a few spots have been touched up. Very good condition, from a small carpentry workshop. The machine was apparently not used to produce large quantities. Dimensions approx. 2600 x 1300 x 1300mm (L x W x H). Weight approx. 800kg. The machine can be demonstrated on-site upon prior appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this provider."

Condition: used, Year of construction: 2017, machine/vehicle number: O3pl, functionality: fully functional, power: 0.75 kW (1.02 HP), input voltage: 230 V, input frequency: 60 Hz, type of input current: AC, rip fence adjustment: manual, actuation type: pneumatic, rotational speed (max.): 12,000 rpm, rotational speed (min.): 12,000 rpm, table width: 330 mm, table length: 2,400 mm, total length: 2,600 mm, total width: 800 mm, total height: 1,800 mm, overall weight: 540 kg, PEMAC 03PL 3-head copy milling machine – Year of manufacture 2017 – Ready for immediate use Very well-maintained PEMAC 03PL copy milling machine for aluminum profiles, manufactured in 2017. The machine has always been used in a commercial setting, has been well-maintained, and is in fully working condition. Inspection and test runs are possible. Specifications Year of manufacture: 2017 230V (1-phase) Kdsdpfx Akjzlar Uswet 3 milling heads Spindle speed: 12,000 rpm Working pressure: 6–7 bar Weight: approx. 540 kg Included 35 used and new milling cutters Video of the machine in operation available Optionally available: Tekna TK280 punching machine (2012) Compressor Asking price: €6,500. Serious offers will be considered.

Condition: good (used), Year of construction: 2013, – 2 pneumatic clamps – 12,000 rpm Kdedpfx Akey An U Iowst – Mist lubrication system – Weight 180 kg – 230V

Condition: excellent (used), functionality: fully functional, Swivel spindle milling machine KÖLLE F 45 in very good condition; this machine comes from an assembly company and has been idle for the last few years, as it was no longer needed. Everything functions perfectly. All bearings and guides are in good condition; the machine runs very smoothly. Year of manufacture: 1990 with control panel on top Kdsdpfszt Ai Eox Akwot Both fence jaws on the milling fence can be adjusted in depth, with fine adjustment and scale, allowing for planing work, e.g., on a gluing profile. The entire milling fence can also be adjusted in depth using a handwheel and a leadscrew, enabling very precise and fast adjustments. with AIGNER integral fence with spindle locking lever Chips can be removed very effectively with 2 extraction ports, 125 mm on the milling fence and 100 mm on the machine table. with 30 mm spindle, which can be swiveled steplessly from -5 to 45°; the spindle is swiveled electrically with a very precise display; fine adjustment can be made manually with a handwheel. The height adjustment is also electric, and a handwheel is also available for fine adjustment. with right/left rotation We will personally deliver and demonstrate the machine anywhere in Germany for €220.00, so you have no risk when purchasing; shipping to Austria and the rest of the EU is also possible upon request. with a large table opening of 375 mm, which can be reduced by using various rings (this allows for the use of cutters with a very large diameter, and you can also safely mill with small cutters). with 3000, 4000, 5000, 6000, 8000 and 10000 rpm the table is made of heavily ribbed cast iron with 30 mm spindle in the machine; another spindle can also be installed very robust and durable design; the machine was built for heavy-duty milling operations and is suitable for all milling applications. optimal power transmission through belt drive with instruction manual with 3-roller feed system HOL HER, type ET 117 the feed system has right/left rotation and 8 speeds; the feed rollers are individually mounted and are all in new condition. the machine table is 1000 mm deep and 1200 mm wide; it has an extendable support table 1200 mm long. the machine is ready for immediate use. 380 V, 4700 and 5700 W due to the 2 speeds with all necessary safety devices, motor brake, and emergency stop switch; the machine is approved by the German Wood Trade Association (Holz-BG) and has the GS safety mark. the machine weighs approximately 1000 kg with motor protection switch against overload professional-grade machine, not a hardware store reject optimal, simple, fast, and safe operation

Condition: excellent (used), Year of construction: 2008, machine/vehicle number: 1780021272, functionality: fully functional, 3 spindle copy router elumatec KF 178/00 Top routing unit: Cutting range using stops or copy templates 340 x 100 mm Travel 110 mm Bottom routing unit: Cutting range using stops or copy templates 240 x 85 mm Travel at front 95 mm Travel at back 45 mm Spindle speed 12,000 rpm Clamping range for profiles 115 x 100 mm Power supply 230/400 V, 3~, 50 Hz Power output per motor 0.74 kW Cobtjzmn N Reiaf Smorg Compressed air supply 7 bar Air consumption per working cycle 12 l without spraying, 24 l with spraying Length 980 mm, depth 1,250 mm, height 1,610 mm, weight 360 kg Kdedpfxjzy Staj Akwot We can ship the machine to your address.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 1205-H740-00, overall weight: 6,000 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 50 mm, controller model: ANDRONIC 2060, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the specified period, between October 7, 2026, and October 14, 2026! TECHNICAL DETAILS Kedpfozu Iwwox Akwjdt Travel range, X-axis: 500 mm Travel range, Y-axis: 100 mm Travel range, Z-axis: 50 mm Travel range, Z-axis: ±50 mm, relative to the central axis of the rotary indexing table / 200 mm Travel speed, X-axis: max. 30 m/min Travel speed, Y-axis: max. 20 m/min Travel speed, Z-axis: max. 30 m/min Acceleration, X/Y/Z-axis: 10 m/s² MACHINE DETAILS Control model: ANDRONIC 2060 Dimensions & Weight Dimensions (L x W x H): 2,500 x 1,650 x 2,700 mm Total weight: 6,000 kg Operating voltage: 230/400 V Frequency: 50 Hz Rated apparent power: 12 kVA Swivel radius, control panel: approx. 1,050 mm

Year of construction: 2018, condition: used, functionality: fully functional, Profiling milling machine for aluminum and PVC. Kdsdpfxozy I Exs Akwst The machine comes with both left and right conveyors.

Condition: used, Copy Milling Machine DECKEL Model: KF 1 Machine No.: 61510 Year of manufacture: 1981 Kjdpfxjz A Hmwe Akwjdt Weight approx.: 1 t

Condition: used, Schneider SK D 2 twin-spindle table router for the precise machining of solid wood and wood-based materials, featuring two independently operable router spindles. The machine enables efficient working thanks to the rapid changeover between different milling tools without any changeover times. Ideal for a wide range of milling tasks in window, door and furniture manufacturing. Technical data: - Motor, each: 4.5 kW Kdodpfx Akszryrzewot - Spindle diameter: 30 mm - Spindle centre distance: 600 mm - Speed settings: 3000/4000/5000/6000/8000/10000 - D-89440 Lutzingen, Tel. , Fax: , April 2015, asking price €500 - D-89440 Lutzingen, Tel. , Fax: , May 2015, cost price €1,000

Condition: excellent (used), XYZ SMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Year of Manufacture 2008 Kdsdjzuxn Tjpfx Akwst Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar For sale with Jet Machinery Ltd Jet Machinery Stock No: #79245 Machine Serial Number: 10731 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, For sale is a used Felder F-900 Z milling machine with a tenon and groove table length of 1300 mm. The machine is used as an exhibit in our showroom and is therefore in like-new condition. Technical data: - 5 milling speeds - Milling spindle can be swiveled 90° - 45° - Milling fence for tools up to Ø 230 mm Kdedpsw Hfd Isfx Akwet - Multi-adjustment system - Tenon and groove table 1300 mm - Electrically adjustable in height + swiveling "PowerDrive" - Motor power 7.3 kW / 9.9 HP SD start - Year of manufacture 2025 The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: milling machine, milling Reference: R-D1618

Condition: excellent (used), in very good condition. Drilling height: 60 mm 6 drilling units (1.5 kW motors) Rotary heads Table working length: 250 cm Adjustable base Drill spacing on heads: 32 mm Kdodjuflycepfx Akwot Number of drills: 12 x 6 heads

Condition: like new (used), Year of construction: 2023, functionality: fully functional, For sale is a Felder F-700 Z milling machine with 4 spindle speeds. The machine is used as a showroom model at our facility and can be considered as new, with full warranty/guarantee. Technical specifications: - 4 milling speeds - Milling spindle tiltable 90° - 45° - Milling fence for tools up to Ø 230 mm - Multi-adjustment system - Tenoning and slotting table - Motor power 5.5 kW / 7.5 HP, SD start - Year of manufacture: 2023 / as new Kdedpfxowp Ri Us Akwjt The machine is located at A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Info Tel.: 03137-3109 Related terms: milling cutter, milling machine, milling Reference: R-D1618

Condition: used, A very rare Hapfo Type AP-9000-M hydraulic automatic wood-copying milling and turning machine for turning round profiles such as balusters, table legs and lamp parts using a copying turning tool, as well as milling profiles using a milling unit and fluting curved workpieces. Sample image! Illustration similar. Ksdpjzzkf Rsfx Akwedt Technical data: - Centre-to-centre distance: 330 mm - Max. workpiece diameter: 450 mm - Centre-to-centre distance: 4,100 mm - Power consumption: 7.6 kW - L x W x H: 5,800 x 1,100 x 1,500 mm - Weight: ~ 2,000 kg

Condition: new, Year of construction: 2025, machine/vehicle number: 1110119739228, functionality: limited functionality, overall weight: 100 kg, We are selling, on behalf of and for the account of the relevant party, the following damaged/untested machine to the highest bidder. Functionality is untested. By submitting a bid, the machine is purchased as is, where is. Key cutting machine Manufacturer: Silca Model: Quattrocode - D700 Weight: approximately 100 kg gross The machine sustained mechanical damage, likely due to a fall or tipping incident. A puncture of the cardboard material is visible on the top of the outer packaging. According to reports, the machine was found loosely placed on a wooden pallet upon delivery. In addition, it was rotated approximately 90° compared to its original packaging arrangement. The angle profiles intended for securing the machine were detached and were no longer in their intended locking position. The rear black plastic cover is partially broken off. Several broken plastic parts were lying loose on the pallet. The transparent, hinged protective cover of the machine has a continuous crack. Furthermore, several cracks can be seen on the housing body in the area of a rear corner. After removing the rear plastic cover, no further damage to the internal components is visibly apparent. A functional test of the machine was not performed. Damage to the internal electronic components cannot be ruled out. Ksdpez A R Hzsfx Akwedt Sale basis: loaded onto a truck at the location DE-Velbert.

Condition: excellent (used), Year of construction: 1990, machine/vehicle number: 43655, functionality: fully functional, Horizontal cutting range using a stop 230 x 90 mm Horizontal cutting range using a copy template 230 x 90 mm Spindle speed 12,000 rpm Clamping range for profiles 180 x 130 mm Travel 110 mm Power supply 230/400 V, 3~, 50 Hz Kjdpfxozz Aqlo Akwodt Power output 0.74 kW Compressed air supply 7 bar Air consumption per working cycle 12 l without spraying, 24 l with spraying Length 720 mm, depth 650 mm, height 1,440 mm, weight 120 kg Versatile for many applications in aluminium and PVC profile machining Precision routing with a minimum of effort and easy, two-lever operation Copy routing at a ratio of 1:1 transfers the cutting pattern from a template to the profile Your own custom templates can be created (by copying the template to a blank) Copy routing using stops is also possible (only rectangular cutting patterns) Can be set up in only a few steps Pneumatic material clamping unit Manual tracer point with three levels for different cutter diameters Pulsed coolant system The machine is ready for operation, we can ship the machine to your address.

Condition: used, functionality: fully functional, type of input current: three-phase, spindle diameter: 30 mm, table width: 1,070 mm, spindle speed (max.): 9,000 rpm, spindle speed (min.): 3,000 rpm, – very good condition – manufactured in Poland – DTR (Technical Documentation) – interchangeable spindle TECHNICAL PARAMETERS: – spindle diameter: 30 mm – working spindle height: 120 mm – spindle height adjustment – maximum tool diameter: 400 mm Kjdsw Ip Dmjpfx Akwjdt – four spindle speed settings: 3000 / 4500 / 6000 / 9000 rpm – spindle rotation: right / left – table dimensions: 1020 x 1000 mm – auxiliary table dimensions (L/W): 500 x 445 mm – extendable table support to 570 mm – table height from floor: 890 mm – motor power: 5.5 kW – nozzle diameter: 2 x 120 mm – overall dimensions (L/W/H): 202 / 120 / 130 cm – weight: ~500 kg