Used Single Temperatre Cooling Unit (Tcu) for sale (41,085)

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW Cooling capacity: up to 116 kW medium: oil up to 350°C Maximum external volume: 66 ltr at 350°C max. flow rate: up to 150 l/min  max. delivery pressure: up to 8,0 bar Motor power: 2.8 or 4 kW Dimensions LxWxH: 1,414 x 503 x 1,350 mm (without connections for continuous bypass) Weight approx. 225-320 kg Circulation medium connection: Flange DN25 PN16-40 (DIN EN 1092-1), form B1 *HIGHLIGHTS EQUIPMENT: -Regulation and control unit Smart Controller (7" Touch-Displ) -Heating control via solid-state relay -Control box IP54 -Cooling controlled via solenoid valve -Flow measurement using the differential pressure principle -Bypass between flow and return with reduced cross-section -Level monitoring by means of magnetic float switch -flow monitoring by recording the heating rod surface temperature and the flow rate -dirt filter in the cooling water supply and in the return of the circulation system -monitoring of the flow temperature by electronic safety temperature limiter -external oil filler neck -Dilo fittings on internal piping connections (except pump connections) -at 350°C: continuous bypass, including bellows valves -Connection for nitrogen blanketing with pressure gauge and safety valve 0.5 bar at 350°C (option) Visit our website for more details or for other performance classes. Hfedpfsg Ey Rfex Aaijk *Unit is compliant with European Directives. Other directives and standards are only complied with if stated in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be stated in quotations or order confirmations.

Condition: new, *Technical Specification: device type: 6/95 heating capacity: 6 kW cooling capacity: 45 kW Medium: water up to 95°C maximum external volume: 50 ltr at 95°C *Equipment hydraulic: - Cooling and filling controlled by solenoid valve - Automatic from cooling water or manual filling (at filling nozzle/option) - Level monitoring by magnet float-switch - Dirt trap in from process line of circulating system and cooling water inlet - Pump reversing for leak-stop operation - Manual mould draining via leak-stop operation and venting by tap at backside of unit - Filling time monitoring and aquatimer - Cool down mode (temperature adjustable) - Adjustable temperature alarm - Options: filling nozzle, interface cable, mechanical flow metering *Equipment electrical: - Controller SBCmini, with relay for collective alarm 230V switchable, on the back of controller on terminal - Heating control by SSR - Control cabinet IP54 - Interface 20mA TTY; pinning Arburg - Cekon plug 16A *General equipment: - Corrosion resistant components (stainless stell, brass) - Heating rod made of Incoloy - Unit mounted on rolls, two pieces steerable with break - Additional temperature fuse for safe heating switch-off by contactor *Cooling: Power: 45 kW (stainless steel plate heat exchanger) Cooling water connection: Socket G3/8" IG (Performance data at 80°C flow and 15°C cooling water temperature and a pressure difference between cooling water inlet and outlet of 3 bar) *Pump: Type: T401 Output rate (max): 40 ltr/min Pressure (max): 3,8 bar Motor capacity: 0,5 kW Construction: submersible pump / peripheral wheel *Dimensions/Weights/Colours Dimensions L/W/H: 514 mm x 238 mm x 493 mm (w/o conne.) Weight: approx. 30 kg Colour: Case: RAL 7035 light grey Front door: RAL 5015 sky blue *Connections: Circulating medium int. thread G1/2" Cooling water int. thread G3/8" Filling (option) Hfjdpfx Ajfnvvisaisk *This unit complies to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment; customer requests deviating from the standard will be indicated in offers or order confirmations.

Condition: new, *Technical standard specification: Hfodpfxofnvwqs Aaisk Unit type: 6/150 Heating capacity: 6 kW Cooling capacity: 45 kW (Performance data at 80°C flow temperature and 15°C cooling water temperature and a pressure difference between cooling water inlet and outlet of at least 2 bar) Medium: water up to 150°C Maximum external volume: 9 ltr at 150°C *Functional equipment: - Cooling and filling controlled via solenoid valve - Automatic filling via cooling water - Level monitoring by magnetic float switch - Dirt filter in return flow of circulation and cooling water inflow - Reversing circuit for leakage stop operation (usable up to system closing temp.) - Ball valve in flow & return - Automatic temperature-dependent system closure - Filling time monitoring and aquatimer - Adjustable pump overrun - Adjustable temperature alarm - Options: Interface cable - Regulation and control unit SBCmini, with relay for common alarm, 230V, on rear of controller on terminal block - Heating control SSR - Control box IP54 - Interface 20mA TTY; pin assignment Arburg - Cekon plug 16A - Corrosion-resistant components (VA,MS) - Unit mounted on castors, two of them steerable with brake - Additional temperature fuse for safe shutdown of the heating on heating contactor - Bypass between flow and return with reduced cross-section *Pump: Type: Y2051 Delivery rate (max) 27 ltr/min Delivery pressure (max) 4.5 bar Motor power 0.5 kW Type of submersible pump / peripheral impeller *Dimensions/Weights/Colours Dimensions L/W/H: 600 mm x 240 mm x 493 mm (without connection) Weight: approx. 43 kg Colour: Housing: RAL 7035 light grey Front door: RAL 5015 sky blue *Connections: Circulation medium socket G1/2" cooling water socket G3/8" *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: new, *Technical standard specification: Heating capacity: 9 kW Cooling capacity: 50 kW medium: water up to 160°C Max. external volume: 16 ltr at 160°C max. Flow rate 57l/min  max. Delivery pressure 6,0 bar Dimension L x W x H 780 x 305 x 705 mm Weight approx. 80 kg Hjdpfjftm Hrjx Aaijfk HIGHLIGHTS EQUIPMENT: - Smart Controller Plus 7" touch / 4.0 capable - Flow measurement, adjustable flow alarms - Return temperature display - Frequency converter for pump speed control with automatic mode for energy-optimised operation, or adjustable flow rate (in the operating range of the temperature control system) - Electronic pressure transducer in the flow - Interface via 9-pin D-Sub connector 20mA/TTY - Connection for external temperature sensor PT 100 for measuring and displaying the mould temperature - Continuous bypass of the heat exchanger with a 3-way valve to reduce deposits in the heat exchangers - More powerful pump, hydraulic parts made of VA, magnetically coupled - Tool emptying by suction - Booster pump for tool filling at high temperatures - Filling via cooling water can be switched to separate filling - SSR for heating control - IP54 splash water protection Visit our website for more details or for other performance classes. *This unit is compliant with European Directives. Other directives and standards are only complied with if stated in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: new, *TECHNICAL SPECIFICATION: Heating power hot circuit: 48 kW heating capacity cold circuit: 12 kW cooling capacity hot circuit: 42 kW cooling capacity cold circuit: 270 kW medium: water up to 200°C Max. external volume: 10 ltr at 200°C Max. flow rate: up to 200 l/min  max. delivery pressure: up to 6,5 bar motor power: 5,5 kW Dimension LxWxH: 1.395 x 753 x 1.180 mm Weight approx. 580 kg *HIGHLIGHTS EQUIPMENT: -regulation and control via SPS with touch screen -heating via stainless steel tubular heating elements made of Incolloy -Heating control via solid-state relay -control box IP54 externally ventilated2 -electrical wiring on terminal blocks -pot. free input for signal for cold/warm changeover (front door) - Pot.-free contact for collective alarm on 3-pin plug-in connector (front door) (front door) -temperature control unit with heating and cooling circuit, for connection of a valve station for quick changeover between hot and cold circuit -temperature controlled feed of the return water -level monitoring with automatic level compensation -dirt filter in the cooling water supply and in the return of the circulation system Hfedpog Ey Ufofx Aaiok -Separate automatic filling with strainer -Flow measurement in differential pressure principle in both circuits -monitoring of the heating rod surface by temperature sensors -System pressure control, necessary compressed air connection: 6 to 8 bar -booster pump type DS 360 for water make-up -corrosion-resistant components (VA, MS) -unit mounted on rollers and ready for connection *OPTIONS: -System EcoTemp for intermittent operation -connection for ext temperature sensor PT100 or type J/K -Remote touch screen with 15 m cable Visit our website for more details or for other performance classes. *This device is compliant with the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: up to 54 kW Cooling capacity: up to 300 kW medium: water up to 200°C Hfsdpfx Asg Ey T Eeaisk Max. external volume: 43 ltr at 200°C max. Flow rate: max. 230 l/min  max. delivery pressure: up to 8.3 bar Motor power: up to 3 kW Dimensions LxWxH: 1,460 x 525 x 1,200 mm  Weight approx. 330kg Circulation medium connection: flange DN40 (DIN EN 1092-1), form B1 *HIGHLIGHTS EQUIPMENT: -Control and regulation Smart Controller (7" touch display) -Heating control via solid-state relay -Control box IP54, externally ventilated -Expansion tank, heater and piping stainless steel -Heating via stainless steel tubular heating elements made of Incolloy -Dirt trap (circulation) -Unit ready for connection and mounted on castors, 2 of them steerable and with brake -Cooling and filling controlled by solenoid valve -configurable automatic filling via KW inflow or separate connection (factory-supplied via cooling water inflow) -flow measurement by differential pressure principle -Level monitoring by magnetic float switch -automatic temperature-dependent system closure (not with WP7-90) -flow monitoring by recording the flow rate -Bypass between flow and return with reduced cross-section -dirty filter in the cooling water inflow, filling and return of the circulation system -Continuous bypass of the heat exchanger via 3-way motorised control valve (WP7-180/200) -System pressure monitoring via pressure transmitter in the AD tank (WP7-150/180/200) -Pressure booster pump for system filling (WP7-180/200, otherwise optional) -Safety temperature limiter (STB) in the heater and flow (WP7-200) -Pressure gauge in the supply line on the back of the unit -heat-insulated circulation circuit (WP7-150/180/200) Visit our website for more details or for other performance classes. *This unit is compliant with the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Load circuits: 1 or 2 as standard Temperature range: - 45°C to +130°C Medium: water / glycol mixture Hfodpfsg Ezarex Aaisk Dimensions LxWxH (without connections) : 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300kg 2-circuit: approx. 1500kg *HIGHLIGHTS EQUIPMENT: -Controls: Temperature control (standard) -Control via SPS with touch screen -Analogue and digital interfaces -Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) -Heating control via solid-state relay (SSR) -Flow measurement in the internal circuit for flow monitoring (INFO: If the water/glycol mixture is incorrect, the system automatically warns and switches off in the next step) -Pressure-controlled cooling water regulator (INFO: Much more accurate than temperature controls) Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metal) (non-ferrous metal-free optional) All medium-carrying components and piping insulated for low-temperature application -Water-cooled condenser (air-cooled on request). *OPTIONS: -flow rate control: up to 100l/min, >4 l/min +/- 5% of measured value -Pressure control: 0.5 to 4.5 bar (control range) -compressed air monitoring -test piece emptying by means of compressed air - Cooling water monitoring -Limitation of inlet pressure -Other special options available on request and after technical inspection Visit our website for more details or for other performance classes. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: used, Electric chain hoist crane DEMAG, type DCM PRO -125 1/1 H2.8 V8/2, Manulift Year of manufacture: 2004 Load capacity: 125 kg Hook travel: 2.8 meters Lifting speed: 8 m/min Hedpezugnusfx Aaijfk Fine lifting speed: 2 m/min Distance from suspension to load hook: 630 mm Power supply: 400 volts, 50 Hz 1 load chain = 125 kg Manulift hand control directly on the crane hook Weight: 21 kg Good condition

Condition: not inspected (used), Year of construction: 2014, Cooling capacity: 10.1 kW Flow rate: 5,000 L/h Weight: 180 kg Hfodpfjy Nif Ijx Aaijk The unit is ready for immediate shipment and is available immediately!

Year of construction: 2013, condition: like new (used), functionality: unexamined, machine/vehicle number: 130365 bis 130368, The heaters were acquired as part of a machinery takeover from VW/Dieffenbacher and are no longer needed. They are assumed to have very few operating hours (previous use in a laboratory). Hjdpfx Aajx An Eqjisfk Price per unit = €9,000, price for the entire package = €30,000.

Year of construction: 2012, condition: new, FOR SALE: 20 UNITS of NEW, never-used HYDRAULIC COOLING EQUIPMENT. Hfjdpfjzqvaxsx Aaijk PRICE PER UNIT: 4,000.

Condition: good (used), Technotrans coolant unit for offset printing machines Including Aquados 1-5% dampening solution dosing unit Including alcohol content control unit Including 2 new filter bags Hfedpfxexhg Syj Aaiek

Condition: used, Year of construction: 2018, Manufacturer: ONI, Year of manufacture: 2018, Serial no. 181626, Container dimensions: 8,000 x 3,000 x 3,000 mm, 3 pumps, Manufacturer: KSB, Type: ETB (heat recovery/hydraulic cooling/free cooling), Free cooler 500 kW (roof-mounted), 10 fans with adiabatic cooling, L/W/H 9,930 x 2,290 x 1,510 mm, Water treatment system with plastic tank 2 x 3,000 liters, Water softener, 7 heat recovery units, Type SW25, Heating capacity 25 kW, Air volume flow 6,000 m³/h, 4 with door air curtain nozzles, 2 air heaters, Type SW1 (office area), Pump and valve group for heat recovery circuit, Heating element, 200 W, System control: Siemens Simatic S7, Touch panel HMI Hodszn Ataepfx Aaiofk +++ Attention: This system is part of an online auction! +++

Condition: used, Year of construction: 2018, functionality: unexamined, cooling capacity: 737 kW (1,002.04 HP), type of input current: three-phase, overall weight: 8,560 kg, total width: 2,260 mm, total length: 10,080 mm, total height: 2,580 mm, Liquid cooler in free-cooling mode with air-cooled condenser and axial fans Nominal cooling capacity: 737 kW Energy Efficiency Ratio (EER): 3.76 Power consumption: 196 kW Voltage: 400 V / 50 Hz Power consumption: 196 kW Max. operating current: 486 A Starting current: 636 A Refrigerant type: R134A (GWP=1430) Max. gas pressure (HPS): 2,300 kPa Max. gas pressure (LPS): 1,800 kPa Max. H2O pressure: 1,000 kPa Refrigerant temperature: min. -22 °C / max. +130 °C Hodpfxozmtvcs Aaisfk Sound pressure level: 62 dB(A) Sound power: 95 dB(A) Dimensions: Length: 10,800 mm Width: 2,260 mm Height: 2,580 mm Weight: 8,600 kg All information is without guarantee; an inspection is highly recommended. The machine is currently still energized and filled with refrigerant. The sale is made with the exclusion of any warranty and guarantee. If you have any technical questions or are interested, please do not hesitate to contact us.

Year of construction: 2008, condition: excellent (used), STULZ ALD 1062 GE precision cooling / close control air conditioning units, designed for data centre, server room and technical cooling environments. Hfjdpfx Aaszklicoiok The units are manufactured by STULZ GmbH Hamburg, Germany. They are CE marked and operate with R410A refrigerant. Technical details: Manufacturer: STULZ GmbH Hamburg Type: ALD 1062 GE Item No.: A72170 Years available: 2008, 2009, 2010 Refrigerant: R410A Supply voltage: 400V ±10% Frequency: 50Hz ±1% Max. operating pressure: 40 bar Max. refrigerant filling charge: 12.4 kg Made in Germany Application: Data centre / server room / technical cooling Condition: Used Available quantity: 2008 without ECU: 4 units 2008 with ECU: 3 units 2009 with ECU: 1 unit 2010 with ECU: 1 unit 2010 without ECU: 2 units Total available: 11 units

Year of construction: 2012, condition: excellent (used), Used STULZ ALD 1072 GE precision cooling / close control air conditioning units, suitable for data centre and technical room cooling applications. The units are manufactured by STULZ GmbH Hamburg and are CE marked. They use R410A refrigerant and operate on 400V / 50Hz power supply. Units are available with and without ECU, depending on requirement.Technical details: Manufacturer: STULZ GmbH Hamburg Type: ALD 1072 GE Item No.: B84181 Hsdszklcispfx Aaijfk Years available: 2012 and 2014 Refrigerant: R410A Supply voltage: 400V ±10% Frequency: 50Hz ±1% Max. operating pressure: 40 bar Max. refrigerant filling charge: 11.20 kg Made in Germany Application: Data centre / server room / technical cooling Condition: Used Available quantity: 2012 with ECU: 2 units 2012 without ECU: 3 units 2014 with ECU: 1 unit 2014 without ECU: 1 unit Total available: 7 units

Condition: excellent (used), We offer a professional Hyfra Chilly 08/1-S cooling unit, designed for cooling machines, industrial equipment, lasers, welding machines, and other systems requiring stable liquid temperatures. The unit is fully functional, tested, and ready for operation. During testing, it reaches a temperature of 8.3°C, which confirms the correct operation of the cooling system (as shown in the picture). Technical specifications: * Manufacturer: Hyfra GmbH * Model: Chilly 08/1-S * Year of manufacture: 2006 * Cooling capacity: 890 W (at 37°C) * Refrigerant: R407C * Refrigerant quantity: 0.67 kg * Power supply: 230 V / 50 Hz * Max. current draw: 5.10 A * Connected power: 1.20 kW * Max. operating pressure: 29.5 bar Hfedpfxezmdtfe Aaiek * Max. ambient temperature: +42°C * Unit weight: 49 kg * Weight with water: 67 kg Condition: * Used. * Technically sound. * Normal signs of use visible on the housing. * Equipped with a water filter, liquid level indicator, pressure gauge, and quick couplings. It is ideally suited for industrial applications, laboratories, and anywhere efficient and reliable water cooling is required.

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, overall weight: 390 kg, cooling capacity: 9.5 kW (12.92 HP), Coolling water recooler cooling capacity: 6 kW Hfsdpfx Aaew D T T Eeisk weight: 110 Kg.

Year of construction: 2018, condition: excellent (used), Julabo Model: FLW7006 Julabo FLW7006 Recirculating Chiller / Cooling Unit 400V Excellent Condition / Year of manufacture: 2018 For sale is a Julabo FLW7006 recirculating chiller, a high-performance industrial cooling unit suitable for laboratory, testing, and production applications. The Julabo FLW7006 is a water-cooled recirculating chiller. The unit comes from professional use, has been professionally inspected, and is in very good, clean condition. All functions are operational, and the display and controls work flawlessly. Typical applications: - Machine and process cooling - Laboratory and testing technology - Cooling of plastics, lasers, or systems Highlights: - Robust industrial design - Digital temperature display - External control (RS232) - Alarm connection - Casters for easy transport Technical data: Manufacturer: Julabo GmbH Model: FLW7006 Serial number: SN 10339349 Year of manufacture: 2018 (according to nameplate) Refrigeration technology: Refrigerant: R452A Charge: 1,625 g Operating pressure: max. 24 bar CO₂ equivalent: 3.48 t GWP: 2140 Temperature & performance data (manufacturer's specifications): Temperature range: –20 °C to +40 °C Temperature stability: ± 0.5 °C Cooling capacity (typical, depending on operating conditions): Hjdpezix D Djfx Aaisfk - Approx. 1.3 kW at –20 °C - Approx. 5.5 kW at 0 °C - Approx. 7.4 kW at +20 °C Connections & features: - Supply and return (industrial fittings) - Pressure gauge - Shut-off valve - RS232 interface - Alarm contact (max. 30 V / 1 A) - Mobile base with casters Electrical data: Supply: 400 V AC Frequency: 50 Hz Connection: 3P + N + PE Rated current: 14 A Protection class: IP21 Dimensions & weight (approx.): Dimensions (H × W × D): approx. 1050 × 550 × 750 mm Weight: approx. 150–170 kg Shipping & delivery: Condition: used Scope of delivery: - Julabo FLW7006 recirculating chiller - Connection cable Shipping: Freight shipping on a pallet (by arrangement, shipping costs depend on destination) Collection: possible by prior appointment. (Technical data may be subject to change or errors. Details without obligation!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), I am offering for sale a professional Unitek Benchmark laboratory chiller/recirculator. This unit is designed for cooling and maintaining a constant temperature of liquids in laboratory systems, measuring devices, lasers, medical equipment, and other systems requiring a cooling circuit. The housing is made of coated steel, and the tank is a durable construction resistant to the effects of cooling fluids. Technical data: Manufacturer: Unitek Benchmark Stock No.: 043008 Serial No.: LJ080297F Power supply: 230 V AC Hfedpfx Aozlutgeaiok Current: 3.1 A 1 phase Frequency: 50/60 Hz Condition: Used. Very good visual condition. Sold in the exact condition as shown in the pictures.

Condition: good (used), Year of construction: 2012, Control cabinet - cooling unit, control cabinet air conditioning unit, distribution cabinet, heat exchanger spindle cooler -Manufacturer: Harbor, heat exchanger spindle cooler from CNC machining center Santenberg GTC S 2 -Type: HPW-10AR Hedpfoi Sdf Ujx Aaisfk -Voltage: 110V 50/60Hz -Dimensions: 250/75/H580 mm -Weight: 5.7 kg

Condition: used, Refrigeration compressor, refrigeration machine, refrigeration compressor, refrigeration unit, refrigeration compressor, compressor, motor compressor, separating hood compressor, separating hood compressor, cooling unit -Handover: in the current condition as seen Hsdpfx Aaonymgloiofk -Pipe: See photos for damage -Manufacturer: Danfoss, refrigeration compressor cooling unit -Compressor: Type 2515 -Perfomance: -Voltage: 220V/50Hz -Dimensions: 650/425/H400 mm -Weight: 39.7 kg

Condition: good (used), Control cabinet - cooling unit, control cabinet air conditioning unit, distribution cabinet, heat exchanger, wall-mounted cooling unit, control cabinet cooler -Manufacturer: bader, control cabinet - cooling unit -Type: W 25/8 A -Voltage: 230V Hfjdpfx Ajprb Dgeaijk -Power consumption: 0.120 kW -Number: 1x cooling device available -Price: per piece -Dimensions: 300/80/H750 mm -Weight: 11.0 kg/piece

Condition: good (used), Switch cabinet cooling unit, switch cabinet air conditioner, distribution cabinet, heat exchanger, wall-mounted cooling unit, switch cabinet cooler -Manufacturer: Sim, heat exchanger control cabinet cooling unit -Type: 4299 -Voltage: 230V -Cooling capacity: 1,350 W -Dimensions: 400/245/H1000 mm -Weight: 54 kg Hfjdpfx Aaow S Ecgsiok

Condition: good (used), Year of construction: 2000, Switch cabinet cooling unit, switch cabinet air conditioner, distribution cabinet, heat exchanger, wall-mounted cooling unit, switch cabinet cooler -Manufacturer: Siemens, control cabinet cooling unit from CNC milling machine MAHO MH 800C -Type: K1000 -Voltage: 230V -Power consumption: 700 W Hfjdpfxewcb Dpj Aaiok -Dimensions: 155/1100/H455 mm -Weight: 48 kg