Used Single-Sided Circular Saw, Thin Gauge, 30-Inch, 28 E for sale (95,927)

Condition: used, functionality: fully functional, machine/vehicle number: 34554, Mayer & Cie. RELANIT S single-jersey circular knitting machine. Mayer & Cie. single-jersey circular knitting machine, model RELANIT S, machine number 34554. Manufactured in Germany. NAMEPLATE DATA Nominal diameter: 762 mm / 30 inches Gauge: 28 E Pitch: 0.91 mm Number of needles: 2,664 Manufacturer: Mayer & Cie. Maschinenfabrik, Emil-Mayer-Straße 10, Albstadt (Germany) The nameplate indicates “Made in Western Germany” APPLICATION Single-jersey fabric in fine gauge, suitable for shirts, underwear, nightwear, lightweight outerwear, and fine technical fabrics. RELANIT TECHNOLOGY Relative motion cam system, which reduces friction, extends needle life, and reduces yarn tension. INSTALLED EQUIPMENT REIVAX DC-3 electronic defect detector (Taube, Mataró), with sensitivity, current, defect, needle stroke, memory, stop, and reset warnings. OLI-FOX lubricator (Talleres Guerra, Mataró). Analog control panel with A / B / C revolution display. Autonics FX4S counter. Complete upper rail installed on the machine. CONDITION Complete and assembled machine. It does not need to be disassembled to be removed from the warehouse. Currently, fabric from the last production run is still in the machine. A visit can be arranged for an on-site inspection and operational test. YEAR Approximately 1990, based on the serial number and the nameplate. CE MARKING The machine does not have CE marking. For its commissioning within the European Union, the buyer must carry out the corresponding conformity assessment and, if necessary, the required adaptations. DIMENSIONS AND TRANSPORT Approximate dimensions: Length: 2.70 m Width: 2.00 m Height: 2.70 m Fsdpfxozvhx Ro Afujpn Disassembly: No disassembly required Location: Albacete, Spain

Condition: used, functionality: fully functional, machine/vehicle number: 40711, Single jersey circular knitting machine, Mayer & Cie. model MV 1, machine number 40711. Made in Germany. NAMEPLATE DATA · Nominal diameter: 914 mm / 36 inch · Gauge: 28 E · Pitch: 0.91 mm · Number of needles: 3168 · Manufacturer: Mayer & Cie., Emil-Mayer-Straße 10, D-72461 Albstadt, Germany · No CE marking Fpedpfx Afozvn S Rjuen 36" DIAMETER WITH GAUGE 28. With 3168 needles, this machine has the highest needle count in the lot. A 36-inch diameter combined with a fine 28 E gauge is designed for wide-width production: mattress ticking, home textiles, shirting, and lightweight outerwear. EQUIPMENT FITTED · Phototex FM8 electronic fault scanner (ITE), CE marked · Senso+ lubricator by EQ Systeme, 5-liter tank · Air filter-regulator · Control panel with start and stop push-button station · Hengstler counters · Top creel CONDITION Machine assembled, currently protected with film for storage. Viewing, inspection, and a running test on-site can be arranged. DIMENSIONS AND TRANSPORT · Approximate dimensions: length 2.70 m · width 2.00 m · height 2.70 m · Location: Albacete, Spain

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: 988, Jumberca SYX2 single-jersey circular knitting machine, machine number 988, year 1990. Manufactured in Spain by Jumberca S.A., Badalona (Barcelona). MACHINE PLATE DATA: · Diameter: 30 inches · Gauge: GG 18 · Number of needles: 1728 · Plate date: 04/25/1990 · Manufacturer: Jumberca S.A., Badalona, Made in Spain · No CE marking APPLICATION: Single-jersey knitted fabric: plain jersey, pique, and fabrics for outerwear, sportswear, and underwear. Fpedpozvh Eqjfx Afujn INSTALLED EQUIPMENT: · Memminger-IRO LMW 3 yarn control unit · Electrical panel with LOYJE 13.220 transformers and ABB / BBC thermal-magnetic circuit breakers · Transformer with 200, 220, 380, 415, and 440 V taps · Stepped pulley drive · Complete top sinker plate · Emergency stop button NEEDLES: Groz-Beckert Vota 76.48 G09 cylinder needles and SNK 42.37-24 G2 sinkers. Internal set reference: SK 20 5719 001/00. POWER SUPPLY VOLTAGE: The transformer has taps for 200, 220, 380, 415, and 440 V, allowing the machine to be adapted to different power supply networks. CONDITION: Complete and assembled machine. Electrical panel accessible and photographed. A visit can be arranged for on-site inspection and operational testing. DIMENSIONS AND TRANSPORT: · Approximate dimensions: length 2.70 m · width 2.00 m · height 2.70 m · No disassembly required · Location: Albacete, Spain

Condition: used, functionality: fully functional, machine/vehicle number: 102, Jumberca SJM-3 single-sided circular knitting machine, machine number 102. Manufactured in Spain by Jumberca S.A., Badalona (Barcelona). NAMEPLATE DATA: Diameter: 30 inches, Gauge: GG 24, Number of needles: 2304, Manufacturer: Jumberca S.A., Badalona, Made in Spain, No CE marking. APPLICATION: Single-sided knitted fabric in fine gauge: shirts, underwear, nightwear, and lightweight outerwear. FREQUENCY CONVERTER: The machine is equipped with a 400 V Toshiba frequency converter mounted on the control column, with electronic speed regulation. INSTALLED EQUIPMENT: Toshiba 400 V frequency converter, Kübler hour meter and counter, Jumberca panel with eight indicator lights, main switch, Square D control panel with start, stop, and emergency stop buttons, Memminger-IRO Pulsonic 3 Mini lubricator, complete upper cam, fabric take-up system with chains and sprockets. Fpodezvphtspfx Afuen CONDITION: Complete and assembled machine, currently protected with film for storage. Fabric from the last production run remains in the machine. An on-site inspection and operational test can be arranged. DIMENSIONS AND TRANSPORT: Approximate dimensions: length 2.70 m, width 2.00 m, height 2.70 m. No disassembly required. Location: Albacete, Spain.

Condition: used, functionality: fully functional, machine/vehicle number: 108813364, Single-sided circular knitting machine by Paolo Orizio S.p.A., model JO/5, machine number 108813364. Made in Italy. Fsdpfxozvh Sws Afuspn PLATE DATA · Diameter: 30 inches · Gauge: 20 needles per inch · Number of needles: 1860 · Number of feeders: 72 · Cylinder number: 04871290 · Needles: VO 15752 T02SA / T03SA / T04SA · Sinkers: L7 22601 · Belt: Goodyear 200 S 8 M 2032 · No CE marking APPLICATION Single-sided knitted fabric with 72 feeders: plain jersey, pique, fleece and derivatives for outerwear, sportswear and underwear. INSTALLED EQUIPMENT · Orizio MPF positive feeding system · Hole detector · Needle detector · Revolution counter and pre-selection · Open door warning · UNIWAVE mist lubricator · Complete upper butt · Fabric take-up with upper fan INCLUDED OPTIONS The machine panel indicates MPF-UNITS included and ROSEN-UNITS / HOLE-DETECTOR included. LUBRICATION Oil recommended on the plate: Optimol Optigear 5150 / Shell Omala 220. CONDITION Complete and assembled machine. An on-site inspection and operational test can be arranged. DIMENSIONS AND TRANSPORT · Approximate dimensions: length 2.70 m · width 2.00 m · height 2.70 m · No disassembly required · Location: Albacete, Spain.

Condition: used, functionality: fully functional, machine/vehicle number: 1232, Jumberca SFJ single-face circular knitting machine, machine number 1232. Manufactured in Spain by Jumberca S.A. (Badalona, Barcelona). Fsdpfx Ajzvh D Hofuspn NAMEPLATE DATA: · Diameter: 30 inches / 762 mm · Gauge: 20 · Number of needles: 1920 · Manufacturer: Jumberca S.A., Badalona, Spain APPLICATION: Single-face knitted fabrics: jersey, pique, and derivatives for outerwear, sportswear, and underwear. EQUIPMENT INSTALLED: · Memminger-IRO type TPF 20-G feeders with yarn stop · Memminger-IRO Pulsonic 3-Mini lubricator · Hengstler counters · Complete upper cam set · Electrical panel with LOYJE 13.220 contactors and transformers · Drive system with pulleys and mechanical variable speed drive CONDITION: Complete machine, fully assembled. An on-site inspection and operational test can be arranged. DIMENSIONS AND TRANSPORT: · Approximate dimensions: length 2.70 m · width 2.00 m · height 2.70 m · No disassembly required · Location: Albacete, Spain

Condition: used, functionality: limited functionality, machine/vehicle number: 11862780, Paolo Orizio S.p.A. single-sided circular knitting machine, model FI-HN, machine number 11862780. Made in Italy. NAMEPLATE DATA · Diameter: 30 inches · Gauge: 20 · Number of needles: 1860 · Number of feeders: 96 · Cylinder number: 1860253 · Needles: VO 15752 T02 / T03 / T04 · Sinkers: 209225000 · No CE marking 96 FEEDERS With 96 feeders in 30 inches, this machine has the highest feeder density in the lot. For the same diameter and gauge, a higher number of feeders translates into more production per revolution. APPLICATION Single-sided knitted fabric: plain jersey, pique, fleece, and derivatives for outerwear, sportswear, and underwear. EQUIPMENT · Warning panel: network connected, warnings, lighting, Rosen units, open door warning · Two-row counter with preselection · Complete upper fillet Fedpezvm Nbsfx Afuopn LUBRICATION Oils indicated on the nameplate: IP Mellana 150 / Shell Full IP Gear Oil 72 for parts lubricated with oil and the variator; IP Athesia Grease EP2 / Shell Alvania EP2 for greased parts; IP Feltria 46 / Shell Vexilla 6 for needles and sinkers. CONDITION Machine partially disassembled: the cam plate and sinker ring are accessible without covers. Sold as is. An on-site inspection visit can be arranged. DIMENSIONS AND TRANSPORT · Approximate dimensions: length 2.70 m · width 2.00 m · height 2.70 m · Location: Albacete, Spain

Condition: used, functionality: fully functional, machine/vehicle number: 186, Single jersey circular knitting machine, Jumberca model SLM 3. Made in Spain by Jumberca S.A., Badalona (Barcelona). NAMEPLATE DATA · Diameter: 30 inches · Gauge: GG 18 · Number of needles: 1728 · Manufacturer: Jumberca S.A., Badalona, Made in Spain · No CE marking APPLICATION: Single jersey knitting: plain jersey, piqué, and fabrics for outerwear, sportswear, and underwear. FOUR-TRACK CYLINDER: Groz-Beckert Vo-Ls 136.52 cylinder needles in all four positions G001, G002, G003, and G004. Internal set reference SK 20 5727 001/00. A four-track cylinder expands the range of structures the machine can produce compared to a two- or three-track cylinder. EQUIPMENT FITTED · Control cabinet with indicator panel · Kübler counter · Separate main motor · Complete top creel · Gear-driven fabric take-down IDENTIFICATION · Stamped frame number: 209622001 · Dealer: SECONTEX / TEX-ROY S.L., Sta. Agnès de Malanyanes (Barcelona) Fpjdszvh R Hepfx Afuen CONDITION: Machine complete and assembled. Viewing, inspection, and a running test on-site can be arranged. DIMENSIONS AND TRANSPORT · Approximate dimensions: length 2.70 m · width 2.00 m · height 2.70 m · No dismantling required · Location: Albacete, Spain

Condition: used, functionality: fully functional, machine/vehicle number: 109116063, Paolo Orizio S.p.A. single-sided circular knitting machine, model JSV-R, machine number 109116063. Made in Italy. MACHINE PLATE DATA: · Diameter: 30 inches · Gauge: 20 needles per inch · Number of needles: 1856 · Number of feeders: 44 · Cylinder number: 22101088 · Needles: VO 12362 G02 · Belt: Goodyear 200 S 8 M 2032 · No CE marking Fpedpfjzvm Uksx Afuon APPLICATION: Single-sided knit fabrics: plain jersey, pique, fleece, and derivatives for outerwear, sportswear, and underwear. EQUIPMENT INSTALLED: · Orizio control panel with counter and pre-selection · Labeled indicator light panel · IG455 tachometer · UNIWAVE mist lubricator with pressure gauge and regulator · Drive with stepped pulleys · Complete upper fileta · Hour meter LUBRICATION: Oils specified on the plate: Optimol Optigear 5150 / Shell Omala 220. CONDITION: Complete and assembled machine. A visit can be arranged for inspection and on-site operating test. DIMENSIONS AND TRANSPORT: · Approximate dimensions: length 2.70 m · width 2.00 m · height 2.70 m · No disassembly required · Location: Albacete, Spain

Condition: used, Striffler Type 2750-E double mitre circular saw for precise mitre and cross cuts in timber profiles, mouldings and frames. The machine is ideally suited to mass production in the window, door and furniture manufacturing sectors, thanks to its two pneumatically swivelling saw units and electronic positioning. Technical data: - Cutting length: approx. 2,200 mm Fpjdpszryu Aefx Afujn - Mitre angle: 45° – 90° - Workpiece: max. 50 × 70 mm - Further details: See PDF

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 6858, Jumberca MIL model double-sided circular knitting machine, machine number 6858, year 2000. Manufactured in Spain by Jumberca S.A. (Badalona, Barcelona). CE marked. Fpodpfx Aezvhzxjfuon NAMEPLATE DATA: · Diameter: 33 inches · Gauge: GG 18 · Number of needles: 1860 + 1860 · Maximum speed: 20 rpm · Power: 8.4 kW · Voltage: 380 V · Frequency: 50-60 Hz · Maximum air pressure: 6 bar · Weight: 2,890 kg · CE marking APPLICATION: Large-diameter double-sided knitted fabric: interlock, rib, fabrics for mattresses and home textiles. INSTALLED EQUIPMENT: · Control cabinet with start/stop buttons · Electronic lubricator Memminger-IRO Pulsonic 5.2, with oil · Upper fillet POWER SUPPLY: 50-60 Hz. The nameplate indicates 50-60 Hz, so the machine is suitable for both European networks and 60 Hz networks without frequency conversion. CONDITION: Complete and assembled machine. An on-site inspection and operational test can be arranged. DIMENSIONS AND TRANSPORT: · Weight according to nameplate: 2,890 kg · Approximate dimensions: length 2.70 m · width 2.00 m · height 2.70 m · Location: Albacete, Spain.

Condition: good (used), Year of construction: 1985, Cold circular saw, metal circular saw, miter saw, circular saw, sawing system, metal saw -Manufacturer: MEP, Cold circular saw, metal circular saw type TRL 300, swivels on both sides Fpedpfx Aoz Hwc Rjfuon -Engine: Type C 112 M -Power: 2.2 / 3.0 kW -Speed: 720 / 1450 rpm -Saw blade: Ø 300 mm -Cutting area at 90 degrees flat: 110 x 70 mm -Cutting range at 45 degrees: 100 mm -Dimensions: 1100/720/H1490 mm -Weight: 227 kg

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: P260713249, The HOMAG SAWTEQ B-300 profiLine is a high-performance industrial beam saw designed for the precision cutting of coated and uncoated wood-based panels. Engineered for continuous production environments, it combines robust mechanical construction, high cutting performance, automated material handling, and intelligent digital control to maximize productivity while maintaining exceptional cut quality. Key performance features include a 3,800 mm cutting length, ±0.1 mm/m positioning accuracy, and a powerful 24 kW main saw motor with a 2.2 kW scoring saw, ensuring clean, chip-free cuts even on laminated materials. The saw carriage reaches feed speeds of up to 130 m/min, enabling short cycle times and high daily output. Fpsdpozmglkofx Afuen Material handling is highly automated through a 4-ton hydraulic lifting table, dual micro-feeders, automatic loading for thin panels, alignment units, and an optimized pusher system equipped with 11 lifting clamps. Air cushion tables with integrated air nozzles facilitate effortless panel movement while protecting sensitive surfaces from scratches. The machine is built around a heavy-duty steel frame with precision rack-and-pinion drives, maintenance-free measuring systems, and a patented central squaring system that reduces cycle times by up to 25% compared with conventional designs. The robust construction ensures long-term dimensional accuracy, minimal vibration, and excellent repeatability. Operation is managed through the PowerControl V2.1 system with a 24-inch Full HD multi-touch display, HOMAG powerTouch interface, CADmatic 5 software, integrated diagnostics, tool management, and network connectivity. The machine is also tapio Ready, enabling future integration with HOMAG's digital production ecosystem and Industry 4.0 services. Additional features such as ecoPlus energy-saving technology, automatic cutting height adjustment, optimized dust extraction, pneumatic saw movements, electric scoring saw adjustment, and remote diagnostics via TeleServiceNet further enhance machine efficiency, reduce operating costs, and simplify maintenance. Overall, the SAWTEQ B-300 profiLine provides an ideal solution for manufacturers seeking high productivity, precision, automation, and digital connectivity in industrial panel processing.

Condition: excellent (used), Year of construction: 1997, Rip and cross saw REMA DMLK 30 Producer of REMA Machine model / type DMLK 30 Year of production 1997 Machine category Longitudinal and transverse saw Location Gorzów Wlkp. Conditions of delivery PERSONAL COLLECTION Cost of delivery Customer cover Startup type to be agreed Description Comments - after the technical review - very good condition - year of production 1997 TECHNICAL PARAMETERS: main engine 3.9 kW trolley length 1370 mm blade diameter 300 mm angle adjustment 0 - 45 " height adjustment cutting height max. 90 mm cutting width on the right side 885 mm ruler length 1350 mm ratchet extended receiving table two kinds of blade rotation speed 3700 and 5000 RPM The protractor visible in the photos is an additional option for PLN 400 net dimensions: length / width / height 135 x 85 x 135 cm Fpjdpfx Asfv Hphefuon weight ~ 320 kg

Year of construction: 1999, condition: ready for operation (used), A walk-in CNC 5-axis large-format portal milling machine Fooke is available. Travel X/Y/Z: 3000mm/2500mm/1150mm, bridge height: 800mm, table dimensions X/Y: 3000mm/2500mm, spindle power: 28kW, spindle speed: 16000rpm, swivel range A: +/-100°, rotary range C: +/-181.5°, feed rate: 15m/min, rapid traverse X/Y: 20m/min, rapid traverse Z: 10m/min, rotary speed A/C: 8rpm, tool holder: HSK-63A. Machine dimensions X/Y/Z: approx. 6000mm/6000mm/5200mm, weight: approx. 50000kg, control: Siemens 840D powerline. Documentation available. On-site inspection is possible. Fpodpfxjygmc Dj Afusn

Condition: new, empty load weight: 2,700 kg, Year of construction: 2026, operating hours: 1 h, GIANT G2700 X-TRA HD+ mini excavator / articulated loader / loader / wheel loader NEW in signal grey! Bosmans Machines B.V. is an official Tobroco Giant dealer! Our motto: No empty promises, fast delivery! Also, take advantage of a temporary 0% interest promotion from Tobroco Finance! (40% down payment - term 24 months) Whether for infrastructure projects, construction sites, landscaping, or earthmoving, the G2700 X-TRA HD+ can be used in a wide range of sectors and can be operated year-round. The fact that the machine can be transported on a trailer provides flexibility for the user. This makes the G2700 X-TRA HD+ easy to deploy in locations where the work requires it. The G2700 X-TRA HD+ is the top model in the G2700 range and is equipped with a powerful 50 hp Kubota engine. The compact wheel loader is powered by 12-ton planetary axles with electrically switchable 100% locking on both axles. This gives the Giant articulated loader a tractive force of 28,000 N and a maximum speed of 30 km/h. Road specification Netherlands including RDW registration. GIANT STANDARD attachment (hydraulic locking) ROPS / FOPS foldable safety roof deluxe Traffic lights (LED) License plate holder with lighting 1x Rotating beacon (LED) on safety roof 2x Work lights (LED) at the front of the safety roof 2x Work lights (LED) at the rear of the safety roof Fpsdpfx Afoz N Uyajusn Side mirrors (L+R) Pro-inching 2x Double-acting hydraulic function on the lift arm, of which 1x mechanically operated and 1x proportionally operated in joystick Pressure-free quick coupling, male Tandem pump, front Free return on lift arm Leak oil connection on lift arm, standard quick couplings (female) Locking on standard mechanical function, single-sided Lift suspension Hose rupture protection on lift and top cylinder + Floating position + Transport lock (incl. MCO) 2x Work lights (LED) on the lift arm Towing hitch (standard) + Ball hitch Trailer socket 13-pin, rear 2 Different RAL colors Chassis: Giant Yellow + clear coat Engine cover + panels: Giant Yellow + clear coat Thick tires 440/50-R17 AG (radial) with Black rims and Fender widening set 2x Counterweight (62 kg) under machine GP Ground bucket 150cm GA400 Giant attachment €1,405.- Pallet fork 100 cm raised GIANT attachment 2,300kg €970.- G2700 X-TRA HD+ without attachments gross €70,615.- (net €55,850.- excluding VAT) FREE delivery throughout the Netherlands and Belgium Technical specifications: LEASE is possible for entrepreneurs: send your company registration number (for Belgium, your VAT number) by email / app and you will receive a non-binding quote / credit check as soon as possible. LEASE 60 months €945.- LEASE 72 months €815.- LEASE 84 months €725.- Also, take advantage of a temporary 0% interest promotion from Tobroco Finance! (40% down payment - term 24 months)

Condition: good (used), Cold circular saw, metal circular saw, miter saw, circular saw, sawing system, metal saw -Manufacturer: MEP, cold circular saw metal circular saw type TRL 300 pivoting on both sides -Engine: Type C 112 M -Power: 2.2 / 3.0 kW -Speed: 720 / 1450 rpm -Saw blade: Ø 315 mm -Cutting area at 90 degrees flat: 110 x 70 mm -Cutting range at 45 degrees: 100 mm Fjdpfx Aexlzytofuepn -Accessories: incl.2 saw blades, see photos -Dimensions: 1230/630/H1800 mm -Weight: 273 kg

Year of construction: 2008, condition: like new (used), main engine 3.9 kW trolley length 1370 mm disc diameter 300 mm angle adjustment 0 - 45 " Fpjdomi Nz Depfx Afuon height adjustment cutting height max 90 mm two types of disc rotation speed 3700 and 5000 RPM

Year of construction: 2022, condition: ready for operation (used), Offered is an SLM280 2.0 Single 700W year 2022, approx. 5350h, SLM MCS control, build volume X/Y/Z: 280mm/280mm/365mm minus thickness of substrate plate, 3D optics configuration: Single single/double 400W/700W, Dual 400W/700W IPG fiber laser, build rate: 113cm³/h, layer thickness: 20μm-90μm, feature size: 150μm, beam focus diameter: 80μm-115μm, scan speed max.: 10m/s, inert gas consumption process: 5l/min (argon), inert gas consumption purging: 110l/min (argon). Accessories: chiller package HRS050 L/W, screening station PSM100 V3, handling device BPH280, bottle lift, material change kit. SLM280 2.0 complete incl. PSM100, powder containers, substrate plates (1.2709 & AlSi10Mg), additional filter housings, filter elements. Fully serviced annually by SLM Solutions (service reports available). Availability from 01.12.2025, machine dimensions X/Y/Z: 2600mm/1200mm/2700mm. Inspection possible by arrangement. Fsdpfx Aexy R Ezefujpn

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Double-sided component painting line fully automatic Fpsdetut Dxjpfx Afusn Working width of the line 1300 mm The line consists of the following devices: - Vacuum feeder - automatic feeder before painting - GIARDINA Dualtech 416 automatic paint machine - 2 x 12m hot air drying tunnel - UV dryer - 3 lamps - material turntable - automatic painting machine RICHFRUITS - 2 x 12m hot air drying tunnel - UV dryer - 3 lamps - Vacuum feeder Machine in working order, connected in very good condition.

Condition: used, Year of construction: 2018, operating hours: 8,563 h, functionality: fully functional, WEILER E 30 X 750 Cycle Turning Machine (2018) Manufacturer: WEILER Type: E 30 X 750 Cycle Turning Machine Year of manufacture: 2018 Fpjdozy Sr Nopfx Afuen Condition: Used Operating hours: 8563 h

Condition: good (used), Year of construction: 1994, For sale is a robust oscillating circular saw from the German manufacturer Bäuerle, model PKS, manufactured in 1994. The saw comes from a public institution and has always been maintained and serviced. Thanks to its mobile base, the machine can be used flexibly within the workshop. Ideal for the precise cutting to length of solid wood, timbers, planks, and sheet materials. Fodpszz Nqlsfx Afuspn Technical data and features: +Manufacturer: Bäuerle +Model: PKS +Year of manufacture: 1994 +Motor power: 3 kW +Connection: 400 V +Mobile base +Saw blade diameter: max. 450 mm +Saw blade bore: 30 mm +Speed: approx. 2,800 rpm +Cutting height: approx. 125 mm +Cutting width: approx. 600 mm +Mitre range: 0–45° +Dust extraction connection: Ø 100 mm Solid and durable design for professional use in carpentry shops, joineries, and wood processing companies. If you are interested or have any questions, please do not hesitate to contact us! Price: Negotiable €3900 net.

Year of construction: 2019, condition: used, functionality: fully functional, machine/vehicle number: ADS550×5000, For sale: Fenstek ADS550×5000 CNC-controlled double-head cutting saw from 2019 for the precise cutting of aluminum profiles. The machine is suitable for series production of profiles for windows, doors and facade systems. The two saw heads can operate independently or synchronously. The moving saw head is automatically positioned via a servo system. Key benefits: - Fully CNC-controlled - Two saw heads operating independently or synchronously - Automatic servo positioning of the moving saw head - Automatic height measurement system for precise cuts below 45° - Touchscreen operation - Integrated label printer for product identification and traceability - Infinitely adjustable saw feed - Heavy and stable machine bed Technical specifications: - Power supply: 380–420 V / 50 Hz Fedpfxsx R U Epe Afuepn - Total power: 5.5 kW - Saw motors: 2 × 2.2 kW - Saw blade diameter: 550 mm - Maximum cutting length: 5,000 mm - Minimum cutting length at 90°: 360 mm - Cutting angles: 45° and 90° - Repeat accuracy: ±0.1 mm - Air consumption: 60 l/min at 0.5–0.8 MPa A complete double-head cutting saw for companies that want to process aluminum profiles quickly, reproducibly and accurately.

Condition: new, Year of construction: 2023, machine/vehicle number: 15562, type of input current: three-phase, overall weight: 900 kg, input voltage: 400 V, operating pressure: 7 bar, input frequency: 50 Hz, Single-sided drilling and dowel insertion machine Omal Velox 1300, manufactured in 2023. Equipped with a glue gun sensor and a laser measuring device. Fsdpfx Afoz Ngkdjuepn

Condition: excellent (used), Year of construction: 2007, Complete saw line consisting of loading unit, fully automatic circular saw, and unloading unit. Suitable for a wide range of applications, especially in the photovoltaic and automotive industries. Loading Unit: - Horizontal loading magazine model HLM - 4-strand timing belt conveyor - 6 compartments, each 285mm wide, for profile feeding - Maximum material height according to the saw cutting area; round material up to max. diameter 130mm - 3 sliding strips between timing belts as additional support - Profile length min. 2,700mm, max. 6,500mm Saw: - Fully automatic circular saw Pressta-Eisele model PROFILMA 510 E-SA - Saw blade diameter max. 500mm - Continuously variable speed adjustment - Hydro-pneumatic saw blade feed, infinitely adjustable, from rear to front Fedexvbvvjpfx Afujpn - Siemens S7-300 control system with touchscreen - Reversing device with five-fold stroke up to max. 5,000mm - Electric material feed 3 – 1,000mm (single stroke) - Cutting gap extension on both sides - Pneumatic unloading slide - Scrap flap after saw for offcuts / remains - Cut length depending on profile, from 8mm - Menzel minimum quantity lubrication system - Clamping pressure regulation - Two extraction nozzles for chip extraction Unloading: - Table size 1,500mm x 2,500mm - Pneumatic cross pusher