Used Sip Bevel Gear - 1 Piece for sale (99,805)

Condition: like new (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 25582, Equipped with: Fanuc 30ia Control Hydraulic System Coolant System Chip Conveyor Pneumatics Lube System Jib Crane Change Gears Mist Collector Transformer Work Light Stack Light Specifications: Extreme Ratio: 10:1 Root Angle Range (B-Axis): -5 deg. TO 90 deg. Equivalent Root Angle Range: -8 deg. to 90 deg. (Equivalent refers to cradle type machine.) Face Hobbing: Examples of Maximum Gear Pitch Diameter -35 Degree Spiral -152 mm TRI-AC Cutter w/13 Blade Groups Max. Full Depth: 0.550" Max. Face Width: 1.6" Face Milling: Examples of Maximum Gear Pitch Diameter -35 Degree Spiral -7.5" Diameter Cutter Max. Full Depth: 0.625" Max. Face Width: 1.6" Max. Swinging Base Travel (B-Axis): -5 deg. to 90 deg. Max. Vertical Travel (Y-Axis): -4" to 7" Max. Horizontal Travel (X-Axis): -6" to 4" Sliding Base Travel (Z-Axis): 2" to 12" Ledpfxezn Aymj Amzjru Machine Center to Work Spindle Face (Fixed): 4.5" Tooth Number: 5 to 200 Inclusive Cutting Diameters: Conventional Face Milling: 1.1" to 7.5" Helixact: 100mm to 200mm Fine Pitch: 102mm to 152mm Coarse Pitch: 152mm only Speeds: B-Axis--Swinging Base (Degrees per Second): 30deg./sec. A-Axis--Work Spindle (Face Milling)(RPM): 0-75 A-Axis--Work Spindle (Face Hobbing)(RPM): 0-375 C-Axis--Cutter Spindle (RPM): 30-500 X-Axis--Horizontal (Inches per Second): 4.92"/sec. Y-Axis--Vertical (Inches per Second): 4.92" Z-Axis--Sliding Base (Inches per Second): 4.92"/sec. Work Spindle: Diameter of Taper at Large End (#39 Taper): 3-29/32" Taper per Foot: 39/64" Depth of Taper: 3" Floor Space: 95.75" x 63.5" Height (less mist collector): 90.75" Approx. Weight: 22,000 lbs

Condition: good (used), workpiece diameter between centers: 2,286 mm, The No. 61 Angular Hypoid Tester is designed to test large bevel and hypoid gears up to 90" diameter and with shaft angles from 0 - 135 degrees. Spur, helical and internal gears can also be accommodated. The drive or pinion spindle can be rotated in either direction at a recommended spindle speed of 600 RPM. It is mounted in a head which is vertically adjustable on a column, so that the spindle can be offset either above or below the center line of the gear spindle for testing hypoid gears. The pinion head column is adjustable angularly in a horizontal plane to permit testing of gears of any shaft angle from 0 - 135 degrees. Specifications: Lsdpfx Amsrtrzdozsru Centerline of Drive Spindle to Nose of Brake Spindle (90 degrees shaft angle and without face plate): 38-1/2" Max. / 7-5/8" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and without face plate): 60" Max. / 10" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and with 54" face plate): 60" Max. / 28" Min. Centerline of Brake Spindle to Centerline of Drive Spindle (For Spur Gears): 56" Max. / 6" Min. Distance Between Nose of Brake Spindle and Nose of Drive Spindle (for spur gears): 36-1/2" Max. / 0" Min. Offset of Drive Spindle Either Above or Below Centerline of Brake Spindle: 10" Range of Shaft Angles: 0 - 360 Degrees Maximum Diameter of Gear: 90" Diameter of Face Plate: 54" Outboard Bearing: 3" Diameter Hole Spindles: RPM of Drive Spindle Pulley Set No. 1: 100 - 400 RPM of Drive Spindle Pulley Set No. 2: 250 - 600 Diameter of Taper Hole (large end): 6" Taper Per Foot: 3/4" Depth of Taper: 8" Hole Through Spindle: 5-1/2" Net Weight of Machine: 20,000# Net Weight of Machine W/Outboard Support and Bed Plate: 24,000#

Condition: used, Year of construction: 1973, machine/vehicle number: 24109, Equipped with: Stock Divider Hydraulic Work Clamping Chip Conveyor Lsdpsxdfa Ujfx Amzsru Cutter Clamping Bolt Index Plate Change Gears Hydraulic System Coolant System Specifications: Min. Outside Cone Distance: 2.75" Max. Cone Distance: 10" Max. Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Depth of Taper: .625" Cutter Speeds: 6.8 to 16.5 RPM Feeds (seconds/tooth): 3 to 9 Main Motor: 5hp, 900 rpm Hydraulic Motor: 7.5hp, 1800 rpm Approx. Floor Space: 118" x 86.5" Needed Overall Height: 70" Approx. Net Weight: 16,000 lbs Shipping Weight Boxed for Export: 17,000 lbs

Condition: used, Year of construction: 1977, machine/vehicle number: 19909, Equipped with: Index Plate Geneva Cam Cutter Body Hydraulic Work Clamping Coolant Pump & Tank Chip Conveyor Additional Cutter Bodies, Index Plates & Geneva Cams Available Specifications: Minimum Outside Cone Distance: 2.75" Maximum Cone Distance: 10" Maximum Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 Deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Lsdpfx Amjxdfazozeru Depth of Taper: .625" Cutter Speeds: 15.6 to 87.7 RPM Feeds (seconds/tooth): 5 to 34.3 Main Motor: 10hp, 1800 rpm Hydraulic Motor: 7.5hp, 1800 rpm Approximate Floor Space: 118" x 86.5" Needed Overall Height: 70" Approximate Net Weight: 18,820 lbs Shipping Weight Boxed for Export: 20,500 lbs

Condition: good (used), gear diameter: 508 mm, total height: 1,780 mm, total length: 2,990 mm, total width: 2,200 mm, MODEL 610 GLEASON GEAR ROUGHER/FINISHER Equipped with: Hydraulic Workholding Pendant Control Chip Conveyor Ljdpfortrykjx Amzoru Index Plate Geneva Cam Change Gears Hydraulic System Coolant System Manuals Specifications: Maximum Gear Pitch Diameter: 20" Cutter Diameters: 9", 10.5", 12",14",16", 18" Whole Depth: 1.250" Root Angle: 60 to 80 deg. Face Width: 3.0" Extreme Ratio (Minimum): 2.25 to 1 Number of Teeth: 20 to 75 Diameter of Taper Hole at Large End: 3-27/64" Cutter Speeds (Per Minute) for Roughing: 15.6' to 87.7' Feeds (Seconds Per Tooth) for Roughing: 3 to 35 Cutter speeds (Per Minute) for Finishing: 6.8' to 20.5' Feeds (Seconds Per Tooth) for Finishing: 3 to 9 Floor Space: 118" x 86.5" x 70" H Weight: 17,500 lbs.

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 25734, wheel diameter: 700 mm, gear diameter: 1,000 mm, wheel width: 152 mm, workpiece spindle speed (max.): 67 rpm, feed length X-axis: 610 mm, feed length Y-axis: 610 mm, feed length Z-axis: 725 mm, pivoting range: 95 °, spindle bore: 203 mm, travel distance X-axis: 610 mm, travel distance Z-axis: 725 mm, Equipment: rotational speed infinitely variable, Equipped with: Fanuc 150MB Control Lodsxaqa Sopfx Amzsru Hydraulic Chucking Work Spindle Large Bore Work Spindle #80 Taper Stock Divider Helical Motion Modified Roll Hansen Coolant Chiller & Filtration Coolant Tank & Pumps Chip Conveyor Chip Hopper Reven Mist Collector Hydraulic System Transformer Cutter Bolt Work Light Operator Platform Hand Tools Documentation Specifications: Extreme Ratio: Face Milling: 10:1, Face Hobbing: 10:1 Full Depth: Maximum: Face Milling:1.25" (31.75mm), Face Hobbing: 0.93" (23.50mm) Face Width: Maximum: Face Milling:6.00" (152.00mm),Face Hobbing: 3.00" (76.20mm) Range of Tooth Numbers: 1-300 Inclusive Gear Pitch Diameter, Maximum: 1000 mm (39.37") Cutter Size, Maximum: 18" (diameter) Face Milling Cutter Size, Maximum: 350 mm (radius) Face Hobbing Root Angle Range (B-Axis) 5 deg.to 90 deg., Face Hobbing:5 deg. to 90 deg. Machine Center to Work Spindle Face:9.00"Fixed, 229mm (Fixed) A-Work Spindle: 0 to 67 RPM, 0 to 333 RPM B-Swinging Base: 0 to 30 deg./sec, N/A C-Cutter: 0 to 500 deg., Same X-Horizontal: +/-305mm (+/-12") Y-Vertical: +/-305 mm (+/-12") Z-Sliding Base: -25/+700mm (-1/+28") B-Root Angle: -5 Degree/+90 Degree Diameter of Taper Hole at Large End: 8" (#80 Taper) to 6" (#60 Taper) Taper Per Foot:3/4", Same Depth of Taper Front:6", 152.40 mm Depth of Bore: 678 mm (26.7") Diameter of Taper Bore: 140 mm (5.5") Diameter Through Spindle of Hole:7.125", 180.98 mm MACHINE DIMENSIONS: Length x Width:233"x 209", 5920 mm x 5310 mm Height: 129", 3280 mm Weight: 65,000 lbs., 29,484 kg

Condition: good (used), Year of construction: 2000, gear diameter: 449 mm, Equipped with: Fanuc 150MB CNC Control Dry Cutting Cutter Shroud Chip Evacuation System Auto Doors Hydraulic System Lubrication System Work light Stack Light Specifications: Largest Speed Ratio: 10:01 Work Area (Continuous): Largest Depth of Teeth: 15.24 mm Largest Width of Tooth Face: 50.8 mm Work Area Axis: Horizontal Movement X Axis: -114 - 178 mm Vertical Movement Y Axis: -178 - 190 mm Movement of the Carriage Baseplate Z-Axis: -10.16 - 500 mm Workpiece Headstock Swiveling Range B-Axis: -3 - 90 Degree Maximum Distance Machine Center to Spindle Side: 165 mm Number of Teeth: 5-200 Inclusive Max. Gear Pitch Dia. of Typical 35 Deg. Spiral Angle Gear Using Max. Cutter Dia. 12" Cutter at the Following Ratios: Face Milling 1 x 1 - 13.5" - 342.9mm 2 x 1 - 16.0" - 406.4mm 5 x 1 - 17.7" - 450.0mm Face Hobbing (210mm Dia. Cutter) 1 x 1 - 10.560" - 268.22mm 2 x 1 - 10.286" - 275.00mm 5 x 1 - 11.810" - 300.00mm Milling Head Diameter: Helixact: 100,125,169,200,250,320mm Lodpfx Ameruakgjzoru Continuous Gumption Procedure, Teichloroethylene: 102 - 210 mm Workpiece Spindle: Drilling of Large Diameters: 5 3/64" Cone Upward Gradient on 304.8 mm (1 Foot): 21/32" Deep One of the Cone: 5.29" Diameter of the Whole Spindle Perforating: 3.35" Speeds: B-Axle Workpiece Headstock Drag Axis: 30 Degrees A-Axle Workpiece Spindle Number of Revolutions: 0 83 min-1 X-Axis Horizontal: 80 mm/sec Y-Axis Vertically: 80 mm/sec Z-Axis Carriage Baseplate: 80 mm/sec Space Requirement L x W x H (Approximate): 4.75 x 3.40 x 2.54m / 188" x 134" x 100" Machine Weight (Approximate): 10980 kg / 24,156#

Condition: new, for Spider 230; Spider 350 Lrsdpfx Aj Abfpzjmzeu Packaging quantity: 1 Packaging unit: piece

Condition: new, 06580421;1104301010100 Packaging unit: piece Packaging quantity: 1 Lodpfj Abflvex Amzsru

Condition: new, 06580422; 06565388; 1104301010200; 0656 53 Packaging quantity: 1 Packaging unit: piece Lrsds Abfl Nepfx Amzsu

Condition: new, 6580616; 1104501; 0658 0616; 06580616 Lrsdpfx As Abfmgjmzsu Packaging quantity: 1 Packaging unit: piece

Condition: new, 6563287; 1104501; 0656 3287; 06563287 Lrsdpfx Ame Abfmaozeu Packaging unit: piece Packaging quantity: 1

Condition: new, 1292 740151 Lodpe Abct Dsfx Amzsru Packaging unit: piece Packaging quantity: 1

Condition: new, for CM 165; 166; 170 Lrodpfj Abfgmox Amzou Packaging unit: piece Packaging quantity: 1

Condition: new, functionality: fully functional, machine/vehicle number: 01.3206969317.0003.00, power: 2.2 kW (2.99 HP), rotational speed (max.): 1,400 rpm, input frequency: 50 Hz, type of input current: AC, overall weight: 89 kg, torque: 1,700 Nm, protection type (IP code): IP54, Voltage: 230/400 V (three-phase current) Brake voltage: 400 V AC Insulation class: B Lrsdpfx Amju Datqjzeu This bevel geared motor is a powerful drive solution that is ideal for demanding industrial applications. With its robust design and high efficiency, this motor offers reliable performance at variable speeds. The integrated bevel gearbox ensures a compact design and enables optimum power transmission. It is particularly suitable for conveyor technology, mechanical engineering and other industrial applications where precision and durability are required.

Condition: new, Table, overall length 2000 mm, frame made of steel, galvanized, 3 mm, for screwing on, table surface perforated sheet metal. · Completely made of steel, hot-dip galvanized or hot-dip galvanized and powder-coated · Very stable and weather-resistant · Table surface made of perforated sheet metal, 3 mm · Side panels made of R Overall width: 700 mm Design: for screwing on Overall height: 750 mm Lrodo Addq Aspfx Amzju Board thickness: 3 mm Frame: Steel Weight: 129 kg Frame color: galvanized Features: Table surface perforated sheet metal Overall length: 2000 mm

Condition: new, Description Ledpfx Ams Adh H Ujzsru Equipped with a powerful motor that can be adjusted to three speeds, the PCW3000-Li can be used both indoors and outdoors, down to -14°C (6.8°F). It features a brushless electric motor that can be tilted 360°. It is a direct drive, meaning there is no clutch. Depending on the selected speed and the weight of the load being pulled, the battery provides 20 to 40 minutes of continuous pulling without any loss of power. It is always ready for use and requires no maintenance when not in operation. Included in the set: 1x PCW3000-Li: Battery-powered pulling winch, max. pulling force 1000 kg 1x PCA-1205M: Polyester rope, 10 mm x 50 m, 2200 kg MBS 1x PCA-1360: "ROPEWIZER" heavy-duty thimble for ropes with Ø 10-12 mm 1x PCA-1255: Rope bag - Small - Ø26 cm x H36 cm - for 50 m / 12 mm rope 1x PCA-1275: Stainless steel pulley, 60 kN MBL, for 6-10 mm ropes 2x PCA-1276: Oval steel carabiner, MBS 25 kN 1x PCA-1281: Rope end hook with safety latch, MBS 750 kg 1x PCA-1260: Polyester sling, 60 mm x 2 m, MBS 2180 kg 1x PCA-0231: 82V quick charger with active cooling 1x PCA-0206: 82V lithium-ion battery with Bluetooth - 2.5 Ah capacity 1x PCA-1350: Polyester round sling, 2.50 m

Condition: new, Flagpole H9mxD90mm, hard aluminum, anodized, with rotating boom and internal hoisting mechanism. · 1-piece, with rotating boom · with telescopic boom, Ø 40 mm, adjustable from 100-1500 mm, for flag fabrics with a hem · with plastic loops for attachment to the mast · in Features: with rotating boom Height above ground: 9 m Ljdpfs Adczyex Amzeru Hoisting mechanism: internal Material: hard aluminum, anodized Ø: 90 mm

Condition: new, Flagpole H8mxD90mm, hard aluminum, anodized, with rotating boom and internal raising mechanism. · 1-piece, with rotating boom · with telescopic boom, diameter 40 mm, adjustable from 100-1500 mm, for flags with a hem · with plastic loops for attaching to the flagpole · Raising mechanism: internal Diameter: 90 mm Material: hard aluminum, anodized Height above ground: 8 m Features: with rotating boom Lrsdpfxs Adcztj Amzju

Condition: new, Flagpole H9mxD90mm, hard aluminum, anodized, with internal hoisting mechanism. · 1-piece · Cylindrical profile · Internal hoisting mechanism, lockable access opening · With plastic loops for attachment to the flagpole Lodpfx Aj Adc R Iemzsru · Vandal-resistant cable system Material: Hard aluminum, anodized Height above ground: 9 m Hoisting mechanism: Internal Diameter: 90 mm

Condition: new, Canopy, basic model, single-sided, B2145 x H2250 x D2330 mm, shed roof, profiled sheet metal, gray-white · For sheltering bicycle racks, waste containers, or as storage space for pallets, wire mesh containers, or other storage items · Galvanized steel construction with a round tube frame Depth: 2330 mm Width: 2145 mm Design: Shed roof Height: 2250 mm Frame: Galvanized steel construction Design: Basic unit, single-sided Roof color: Gray-white, RAL 9002 Frame color: Gray-white, RAL 9002 Roof: Profiled sheet metal Lrjdpfx Ams Adcmpjzeu

Condition: new, Overhead shelter, basic model, single unit, B2975xH2250 xT2330 mm, shed roof, corrugated sheet, gray-white. · For sheltering bicycle racks, waste containers, or as a storage space for pallets, wire mesh containers, or other storage items. · Galvanized steel structure made of round tube frame, with Ledo Adcmvspfx Amzoru Roof color: gray-white, RAL 9002 Design: shed roof Depth: 2330 mm Frame color: gray-white, RAL 9002 Frame: galvanized steel structure Width: 2975 mm Roof: corrugated sheet Height: 2250 mm Design: basic unit, single-sided

Condition: new, Canopy, add-on unit, type EH, dimensions 4300x2250x2330 mm, pitched roof, corrugated sheet metal, gray-white Ledpfx Ao Adcnajmzsru · For sheltering bicycle racks, waste containers, or as a storage area for pallets, wire mesh containers, or other storage items · Galvanized steel construction with a round tube frame Design: Add-on unit, single-sided Type: Pitched roof Frame color: Gray-white, RAL 9002 Width: 4300 mm Height: 2250 mm Roof: Corrugated sheet metal Roof color: Gray-white, RAL 9002 Frame: Galvanized steel construction Depth: 2330 mm

Condition: good (used), Year of construction: 2007, max. wheel diameter 500 mm gear width 200-400 mm module 12 turning speeds 0-3250 U/min bracke pressure bis max. 95 Nm inner taper Konus #39 Lrsdsvr Hf Espfx Amzeu Control Fanuc 16 total power requirement 15 kW weight of the machine ca. 6 t dimensions of the machine ca. 2.350 x 2.240 x 2.500 mm HIGHLY FLEXIBLE TESTING OF HARD, FINISHED AND GREEN SPIRAL BEVEL AND HYPOID GEAR SETS The T 60 bevel gear testing machine is a CNC testing machine with three linear axes for the fully automatic hard and soft testing of spiral bevel and hypoid gear sets with a 90° axis angle. It offers versatile objective and subjective testing options with speeds up to 3,250 min and braking torques up to max. 95 Nm.

Condition: used, machine/vehicle number: XLWRT2839C2301615, operating hours: 20,000 h, gearing type: automatic, color: other, Year of manufacture: Apr 2012 Year of construction: 2012 Axle 1: left 8mm right 8mm Lrsdpfxswd Na Ue Amzju Axle 2: left 6 6 mm right 6 6 mm Axle 3: left mm right mm