Used Sml Pp Extrusion for sale (4,474)

Condition: good (used), Extrusion Line with Extruder & Co-Extruder. Sheet configuration B/A/B used for PP. Direct cooling unit (SMK) and SBI measuring unit newly installed in 2015. * Max. output: 1350 kg/h Hsdpsn Utt Hefx Ahzjnp * Main screw output: 950 kg/h * Main screw: 180mm / 33D * Co-extrusion output: 400kg/h * Co-extruder scew: 120mm / 33D * Die width: 650mm * Roll stack: 3 * Winding unit for Jumbo rolls up to 1500kg This Extrusion Line is already disassembled and secured for transport (Location: Waalwijk, Netherlands).

Condition: ready for operation (used), Year of construction: 1998, screw diameter: 85 mm, Complete extrusion line. Individual components can also be offered on request. The line has been used for making tubes from PP filled with chalk and barium sulfate. Components: - 4 Components Colortronic dosing (new controller in 2017) - Berstorff KMC 85/2 (screws renewed in 2019) - Sidefeeder - Complete control of dosing and extruder - Single oil tempering - Stomach melting pump - Krausmaffei Extrusion head 40 to 160 mm (with various sets) - Vacuum tank Battenfeld V250VA - Spray bath K250 VA Battenfeld - Pulling mechanism C250 - 4 Sica - Saw CCM 32/170-2 Roller pole - Tilting table Battenfeld Hjdpou Rda Iofx Ahzenp

Year of construction: 2009, condition: excellent (used), functionality: fully functional, machine/vehicle number: P251001170, Complete extrusion line for ABS/PP furniture edge banding from the renowned brand AMUT Hnsdpfx Ahjxiu Npszop The line is in perfect technical condition, regularly serviced, and currently in operation. The set includes a spare screw, further enhancing its operational value. Line equipment: 1. AMUT EA 100 extruder 2. AMUT calender station with CLV 1200 roller conveyor 3. AMUT TRK 100 edge banding machine 4. AMUT edge winder 5. Calendar cooling unit with a complete set of hoses 6. Electrical control cabinets for the entire line Material: ABS, PP (virgin + regrind) Working width: 700 mm (after side trimming) Nominal width: 1000 mm Thickness range: 0.5 – 2 mm Extruder: single-screw AMUT EA100 33D Extruder output: ABS: 320 kg/h PP: 350 kg/h Final product: 2 rolls, each 350 mm wide Line speed: up to 25 m/min Year of production: 2009 Technical condition: perfect, complete with spare screw

Year of construction: 2000, condition: used, functionality: fully functional, Polypropylene sheet processing / extrusion line for sheets up to 80 mm thickness x 1,200 mm width. No. 01 CNC machine with 8 tools, Siemens controlled, table size 2520x1700 mm Hjdoxwnb Iopfx Ahzjnp No. 01 CNC machine with 8 tools, Siemens controlled, table size 2520x1260 mm No. 01 CNC machine with 10 tools, Osai controlled, table size 4,000x1,800 mm No. 01 PPH extruder for sheets width 1230 mm and integrated cutting unit No. 01 PPH mechanical/pneumatic welding machine for plates/frames No. 01 PPH pneumatic welding machine for frames No. 01 PPH hydraulic/pneumatic welding machine for handles No. 01 PPH hydraulic welding machine for sheets width 3,000 mm No. 02 forklifts, each 2,500 kg capacity No. 01 PPH shredder, 100 kg/h No. 03 portable PPH extruders No. 02 vacuum lifters, 150 kg each

Year of construction: 2005, condition: ready for operation (used), Screw diameter: 114mm, max. PVC throughput: 600 kg/h, max. screw speed: 20/min, number of heating zones for molds: 12, motor power: 76 kW, rated voltage: 3x 415V AC, rated current: 353A, rated power: 218kW, weight: 7.1t, operating hours: approx. 90,000h. Screws: Geometry designed for PVC profiles, water-cooled, cylinders: nitrided, air-cooled, equipped with a new PLC control system, vacuum pump, and power inverter for the main motor. An on-site inspection is possible. Hedpfxozh Nibo Ahzonp

Condition: good (used), Code: 0323 Brand: SML - ITALY Hedpfx Aetu Hy Eshzonp Model: SILVER P 35/EL - CE Standard Electronic double mitre saw for cutting wood, frames, pvc, aluminium, plastics and various materials - CE Standard Technical data: Oleo-pneumatic head lowering Max cutting length mm 5200 Min cutting length mm 50 Cutting height mm 100 Max cutting width mm 170 Blade diameter mm 350 F30 Motor Hp 3 each - Rpm 3000 Electronic head positioning programmer Bimanual blade lowering control Pneumatic pressures for workpiece clamping N° 2 suction ports diameter mm 60 Working pressure 7 bar Overall dimensions mm 6300 x 1000 x 1600 h Weight kg 1100

Condition: excellent (used), For sale: professional cutter and drill bit sharpener, model PP U3. Condition: very good, complete unit ready for operation. Included in the set: • Set of grinding wheels • Adjustable angular tool holder • Workshop lamp with flexible arm • Keys and clamping elements Specifications: • For sharpening cylindrical and spiral end mills • For sharpening step and cylindrical drills • Wheel linear speed up to 35 meters per second Hnodjxdh Hqopfx Ahzjp • Maximum noise level: 66 dB • Machine weight: 41 kg Solid, stable construction—ideal for precise tool machining. A reliable solution for tool rooms, CNC workshops, and machine shops.

Condition: new, I am offering a professional drum pump from the renowned German manufacturer Lutz – designed for use with various liquids (chemicals, oils, industrial media). ✅ Condition: ✔️ New ✔️ Motor housing has been replaced with an original (factory) part – the previous one was damaged during transport ✔️ Fully functional, ready for operation 🔩 Technical data: Manufacturer: Lutz Pumpen GmbH (Germany) Pump model: MP PP 50/41-R DL SS Motor: MI 4-230 Power supply: 220–230 V / 50 Hz Power: 450–500 W Current: 2.5 A Protection class: IP24 Tube length: 1200 mm Material: PP (polypropylene) + stainless steel (SS) ⚙️ Applications: - Industrial chemicals - Oils, technical fluids - Industry, workshops, manufacturing - Emptying barrels and tanks 📦 Included: ✔️ Lutz pump ✔️ MI 4-230 motor ✔️ Hose + fittings as shown in the photos Hedpjyzulwofx Ahzjnp 🌍 Country of origin: 🇩🇪 Germany ℹ️ Additional information: - High-quality equipment – German-made - Ideal for professional applications - Shipping or personal collection available

Year of construction: 2023, condition: ready for operation (used), Production capacity: 2x120kg, inlet connection (liquid phase): 22mm/RWS22, outlet connection (gas phase): DN50 PN25, optional (unregulated gas phase): RWS28, vent line (safety release): RWS22, separator drain: RWS12, connected load: 40kW, output: 3000kWh. Machine dimensions X/Y/Z: approx. 1900mm/1600mm/400mm. Documentation available. On-site inspection is possible. The machine is unused and still in its original packaging. Hjdouwrwuepfx Ahzjnp

Condition: ready for operation (used), Year of construction: 2016, A complete SML winder including core magazine is available. Infeed part roll width: 2600mm, max. film end width: 2350mm, winding shafts: 6/3 inch, max. mechanical speed: 250m/min, max. roll diameter: 980mm, film thickness range: 15µm-2500µm, core diameter: 3 inch, core type: cardboard/plastic, roll change time: 4min, deposit capacity 2nd table: 15 rolls, power requirement: 52kW, edge trimming: In-Line, Knife type: free cut with razor blade, Winder mode: gap/contact, Roll delivery: 3-axis robot. Including non-stick rollers, linear guide, scale, robot and core magazine. Documentation available. On-site inspection is possible. Hodpfx Aovripyehzjnp

Year of construction: 2006, condition: good (used), Designed for COEX- castfoil production with additional coating unit. The extrusion part of the line has 2 extruders; the coating unit has 1 extruder. Processing of thermo plastics in a temperature range of 90-300°C. Different combinations of production are possible: - main unit (CoEx) with coating 
 - main extruder (CoEx) without coating 
 - coating processing over winding unit on an existing base film 
 For production in the different described combinations you can lock the not necessary equipment parts. 
 POSSIBLE LAYER STRUCTURES: Main extruder: - Mono film if necessary with tensilized film 
 - 3- layer film (A-B-A) if necessary with tensilized film 
Coating unit: 
 - mono film on excisting base film if necessary with second tensilized film Unwind diameter: max. 1.000 mm Hsdspaiaispfx Ahzsnp Allowed roll/bobbin weight: max1.500kg

Year of construction: 2011, condition: good (used), The extrusion line No. 1 was designed for cast film production. Processing of thermo plastics in a temperature range of 150-300°C. POSSIBLE LAYER STRUCTURES: - mono film
 - 3- layer (A-B+C-A) - 5- layer (A-B-C-B-A) DATA OF FACILITY Total output of extruders max. 2230 kg/h Extruder A: 90/33 L/D max. 330 kg/h Extruder B.: 135/33 L/D max. 950 kg/h Extruder C.: 135/33 L/D max. 950 kg/h Film width range (net): 1600 - 2110 mm Two rolls cutting possible (2x 800 – 2x 1055mm) Thickness range: 25-580μm Production speed: 10 - 150m/min Roll width: 2500 mm Max. roll weight: 2000kg ADDITIONAL COMPONENTS (QUALITY): Non-contact thickness equipment for automatic TD profile measurement with double side corona treatment (max. 12000W) Optical inspection system, including marker system if failures are detected, incident and transmitted light system INFRA STRUCTURE (ADDITIONAL UNITS): Dryer 1 – 4 with 4500-liter volume; heating capacity 48kw
 Dryer 5 with 2500-liter volume; heating capacity 20kw
 Dryer 6 with 1500-liter volume; heating capacity 15kw
 Each extruder has a gravimetrical batch-dosing unit with 3 stations. Each extruder has a melting pump and a 2-piston filter change system. MAIN LINE COMPONENTS MANUFACTURERS: SML: extruder; Chair, rollers, winding device GWK: cooling extruder KREYENBORG: screen changer Cloeren: feed block, slot die PIOVAN: dryer, dosing device SERVE: Edge band cutting device MATHO: suction RAPID: Edge strip shredder KONGSHILDE: Recyling edge strips, start rollers INFSTAUB: filling station SMK: chillers SIEMENS: control Hjdpfx Aepah U Tohzonp OCS: camera system SEMET: labeling system AFS: Corona Sation BETA CONTROLL: Radiometric thickness measurement SML: autom. FYLING SPLICE winding unit, BECKOFF control SIMCO: antistatic ALTEK: automatic roll manipulator (transfer carriage)

Year of construction: 1997, condition: used, PILOT EXTRUSION SPINNING LINE POLYESTER MAIN PART WAS DESIGNED BY FOURNE IN 1997 FOR DSM TO MAKE TRIALS OF POLYESTER AND POLYAMIDES, MONO & MULTIFILAMENT. >> EXTRUDER DETAILS : MANUFACTURER : FEP POLYMER YOC : 1997 TYPE : EX 25 - 25 D MAX. THROUGHPUT : CA. 7,0 KG/H (PA6), CA. 5,6 KG/H ( PP ) : CA. 8,2 KG/H ( PET ) NOMINAL SCREW DIA : 25 MM SCREW LENGTH : 25 X D SCREW GEOMETRY : SPECIAL 3-ZONE-SCREW MIXING TORPEDO : CHANGEABLE ATTACHED TO SCREW END , CA 3 X D LONG HEATING CAPACITY : CA. 3,2 KW / 4 ZONES DRIVE : CA. 4,5 KW, AS- MOTOR MIT SCHNECKENGETRIEBE ELECTRICALLY HEATED AND REGULATED TO MAX. 350 ° CELSIUS, EQUIPPED WITH 3 TEMPERATURE CONTROL SENSORS, OVER-TEMPERATURE MONITORING, WATER-COOLED FEED ZONE, REMOVABLE ISOLATION AND BASIC FRAME, INCLUDING INERT GAS IN THE INLET PIPE, EQUIPPED FOR THE SUBSEQUENT RECEPTION OF A TORQUE CLUTCH ON THE GEARBOX END >>> SPINBEAM & MELT PIPE : ELECTRICALLY HEATED SPINBEAM DESIGN : FOR 1 MONFIL OR 2 MULTIFILAMENT THREADLINES SPINPUMPS : 1 = 2 X 2.4CC , 1 = 1 X 2.4 CC , 1 = 1 X 0.6 CC SPINNERETTES : 42 / 59 / 72 >>> Hnodpfjzl Hz Nox Ahzep QUENCH CABINET : FEP Polymertechnik Gmbh YOC : 1995 TYPE : CROSSFLOW Plant Nr. : 7.1396 >>> WINDER : BARMAG TYPE : SW4S Auftragsnr : 10/0428 YOC : 1988 >>> DRAW – STAND : EDMUND ERDMANN GMBH TYPE : DRAWMOD 02/380-3/5/6 LM YOC : 1995 COM. NR : 13/2492 CONTROLS COMPUTER : EDMUND ERDMANN YOC : 1995 FABR. NR : 132492 >>> PREHEATING OVEN : HERAEAUS Gmbh Type : WU6100 , 500C , 3 Nipe, 400 V 11.4 A, 5.4 kW YOC : 1997 FABR. NR : 97/11055 >>> HOIST IN EXTRUDER AREA : HEBEZEUGFABRIK GMBH, YOC : 1998, CAPACITY : 0,7 TONS LIFTING HEIGHT : 0,8 M

Condition: good (used), Year of construction: 1986, Hoffmann Dübelfix chain mortiser with pneumatic lift - very good condition - Hnedevk Dqvjpfx Ahzep Pneumatic tensioner Revolver stop Material support Pneumatic foot pedal Location: from stock 54634 Bitburg - immediately available -

Condition: excellent (used), Extruder for 3D Printing Filament Production – 25/25 L/D We offer a high-quality extruder for the production of 3D printing filament. The system is designed for continuous industrial operation and is characterized by its robust construction, precise temperature control, and excellent material homogenization. Ideal for manufacturers, material developers, and research institutes. Technical Equipment & Features • Extruder 25/25 L/D – efficiently designed screw geometry for uniform melt quality • High-performance melting zone – precise temperature regulation for consistent filament quality • Die for 3D filament extrusion – suitable for all standard filament diameters • Cooling bath – stable filament take-off and optimized cooling section Hsdpfx Aoxwvqqjhzonp • Haul-off unit – finely adjustable pulling speed for exact diameter stability • Winding and spooling device – automatic filament winding • Optimally suited for PLA, PETG, ABS, TPU, and many technical materials

Condition: excellent (used), functionality: fully functional, Different MAAG Melt Pumps available - For example Extrex 110 , 90 , 70 , 56 , 36 - Possible to order complete on a frame with , motor , gear , cardan and a controll cabinett. Hnodpfx Ahjdq Ak Ujzep

Condition: refurbished (used), functionality: fully functional, Extrusion Screen Changers - Continuous Screen Changers Double Piston Filter - - Immediately available, on request also with control, hydraulic unit. Hnodpjh Itl Sofx Ahzop When making your request, please let us know your desired capacity and the material so that we can offer you the right filter.

Year of construction: 2004, condition: excellent (used), KUAG CUT 110 PIPE SAW for PP, PE or PVC PIPES With central pipe fixation Cutting speed 20 m/min. Hsdpfjffp S Hex Ahzjnp Cutting length min. 20 cm Cutting and chamfering Cutting with a cutting roller/pizza knife or a chisel and grip steel Year of construction: 2004 Condition: very good Hablamos espanol Nous parlons français We speak English Hablamos español Nous parlons français We speak English

Year of construction: 1991, condition: excellent (used), PP-PIPE BELLINGMACHINE LÜERS 2 SOCKETS PER CYCLE With ring insert device Type: MU125-2-6-91 Built in 1991 Application: PP HT pipes Two sockets per cycle Tool: 1 set for 2x125 mm HT pipe The Bellingmachine was overhauled in 2014 and modified Condition: very good The machine is my property. Hablamos español Nous parlons français Hsdpfx Aheffp Uiozjnp We speak English

Condition: used, Year of construction: 1999, CNC Lathe YANG type SML-20 Year of construction: 1999 Travel X: 520 mm Numerical Command FANUC Serial OTD Maxi diameter in brocken bed: Ø 480 mm Maxi turning diameter: 200 mm x length 508 mm Spindle diameter: Ø 42 mm Rotation: 4500 RPM Tailstock CM4 Turret 8 tools Equipped with 1 Bar Feeder type DH 65 Equipped with 1 chip conveyor Weight: approx 2,5 T Hnodpfx Ahozku Nfozjp

Year of construction: 2001, condition: used, press capacity 148 to material Hartmetallstangen Hodpfx Aet Hw Snjhzonp quality Extrusionspressvorgang 0

Year of construction: 2012, condition: used, This Macchi 3-layer blown film co-extrusion line is designed for the production of high-quality polyethylene films with outputs of up to 800 kg/h. The line processes LDPE, LLDPE, MLDPE, and HDPE and is suitable for manufacturing collation shrink film, gusseted shrouds, stretch hood film, tubing, and sheeting. Materials to be processed: LLDPE/LDPE/LLD/HDPE Extruders: 65 mm + 80 mm + 65 mm Infrared heaters 3 pcs plate filters Head: 3-layer blown film die head TE5303-IBC-350/500 Die diameter: 350 and 400 mm IBC Die gap: 1.8 mm Output: Up to 800 kg/hour, depending on the material formulation Air ring: Dual-flow air ring, carbon fiber Take-off: Take-off unit, 2400 mm wide Oscillating nip rollers Motorized side gusseting Rewinder: Double winder, fully automatic back-to-back rewinder Winder, fully automatic roll change Reel diameter up to 800 mm Winding width 2350 mm Accessories: Tower Web guide, E&L Hedpfezkru Ejx Ahzonp Gravimetric weight control system, Piovan/Doteco Component blender, Shini Dosing units, Doteco Automatic thickness control, Kundig K-Design profile gauge control system Calibrating basket Corona treater, Martignoni Air shafts, 8 pcs

Year of construction: 2023, operating hours: 20 h, condition: new, functionality: fully functional, 🔥 3D printing filament Extrusion Line – DEMO Unit | 1.75–5 mm | Up to 100 m/min | 12 months warranty High-performance extrusion line for production of filaments (3D printing, welding wires, technical strings). Reliable, fully automated solution directly from manufacturer. Completely made in the European Union. _____ Key Features • Materials: ABS, PLA, PET-G, MARLEX, DOWLEX and others • Filament diameter: 1.75–5 mm Hnsdpjy Ipflsfx Ahzep • PLC control with an automatic operation • Triaxial measurement for precise diameter control • Continuous production (compensator - up to 140 m of filament) • 3-zone cooling tank (up to 80 °C) _____ Technical Data • Line speed: up to 100 m/min • Output: 5–20 kg/h • Screw diameter: 35 mm • Screw length: 30 L/D • Drive power: 9.2 kW • Cooling tank: 6 m • Spool size: 0.5–5 kg (no downtime during change) _____ Condition • DEMO unit – directly from manufacturer • Excellent condition • Available immediately • Full factory warranty for 12 months FCA BOCO price: 158 850,- EUR w/o VAT _____ Manufacturer BOCO Pardubice Machines, s.r.o. (Czech Republic) Over 30 years of experience in plastics processing technology

Condition: used, Feed opening: approx. 600 x 580 mm Rotor width: approx. 600 mm Rotor diameter: approx. 450 mm Stator knives: 2 Hsdezixtfepfx Ahzsnp Rotor knives: 4

Condition: used, Year of construction: 2020, functionality: fully functional, pressing force: 120 t, filling opening width: 2,000 mm, filling opening length: 1,000 mm, bale width: 750 mm, bale height: 1,100 mm, total width: 2,835 mm, total height: 4,374 mm, total length: 19,627 mm, overall weight: 43,000 kg, warranty duration: 12 months, power: 75 kW (101.97 HP), Equipment: documentation/manual, For sale is a baling press, model "HP-G 4 120 VG6," manufactured in 2020, featuring a 6-strand vertical PP twine tying system. The pictures show the machine in its assembled condition. It is now located at our facility in Lathen. The press is sold without a conveyor belt. Before delivery, the machine will be completely overhauled and technically refurbished by our qualified personnel. Our goal is to provide you with a reliable and immediately operational machine that meets the requirements of daily operation. The overhaul includes, among other things, the following services: • Disassembly and inspection of the relevant machine components • Evaluation of all wear-relevant components • Replacement or refurbishment of worn parts • Inspection and repair of the press ram and associated guide elements • Inspection and, if necessary, replacement of wear plates, slide guides, and bearing points • Inspection of the press channel and restoration of the required tolerances • Overhaul of the hydraulic components, including cylinders, valve technology, and hydraulic hoses • Replacement of seals, wear parts, and connecting elements • Inspection of the electrical components and safety devices • Inspection and readjustment of the tying device • Cleaning, assembly, and commissioning of the overhauled system • Performance of functional and load tests after completion of the work Hnedpfezhudqex Ahzep Thanks to the comprehensive overhaul, you will receive a technically inspected machine with high operational reliability and a long service life. We will be happy to provide you with further information, photos, or a customized offer. If you are interested, we look forward to hearing from you.