Used Solex Drying Installation for sale (12,056)

Condition: new, Year of construction: 2023, functionality: fully functional, space requirement width: 3,000 mm, space requirement length: 3,000 mm, space requirement height: 18,000 mm, Solex cooler conditioner dryer Height: 18 meters, entirely made of stainless steel 316, designed for cooling, drying, and conditioning granules of food, fertilizer, or plastics. Capacity: 18 tons per hour. Nsdexw D Nhopfx Alnodc

Condition: ready for operation (used), Year of construction: 2019, operating hours: 30,745 h, functionality: fully functional, overall weight: 2,700 kg, power: 388 kW (527.53 HP), type of input current: three-phase, number of chambers: 3, Equipment: documentation/manual, We offer this ready-to-use Lauber L-ENZ 370 drying system, manufactured in 2019. – professional wood dryer, 388 kW + 3 drying containers Technology from the German manufacturer LAUBER Trocknungstechnik, manufactured in 2019, serial number 41199. The equipment is suitable for utilizing excess heat from a boiler, biogas plant, cogeneration unit, biomass boiler, or other heat source. Technical parameters: - Manufacturer: LAUBER Trocknungstechnik - Type: L-ENZ 370-4 - Serial number: 41199 - Year of manufacture: 2019 - Thermal output: approx. 388 kW - Fan: 11 kW - Power supply: 400/230 V, 3~NPE, 50 Hz - Automatic LAUBER control - Touchscreen control panel - Fan frequency inverter - Circulation pump control - Heat exchanger Nodpfx Ajz I Threlnjdc - WILO circulation pump - Complete electrical installation and switchgear - Complete technical documentation The technical documentation states a thermal output of 388 kW, operating temperatures of 90/65 °C for the heating water, and a water flow rate of 15.2 m³/h. The weight of the unit itself is approximately 2,700 kg. Zeichnung_LENZ_370_4_mit_techni… Drying containers The offer includes: 3 × drying container - Volume of one container: 15 m³ - Total capacity: 45 m³ - The containers are designed for drying material using the LAUBER hot-air system. Suitable applications: The technology is particularly suitable for: - 🌲 firewood - 🌲 wood chips - 🌲 wood biomass - 🌲 sawdust - 🌲 other loose wood materials - or other materials depending on the specific drying technology The LAUBER system uses warm air, which is blown through the material being dried in the containers. The manufacturer uses it for drying wood chips, firewood, and other loose materials. lauber-holztrockner.de Dimensions of the main unit Approximately: 4,630 × 2,390 × 2,750 mm Weight approx. 2,700 kg. Condition: The technology is unused and offered for sale. Complete technical documentation is available, including electrical diagrams, technical drawings, and the manufacturer's documentation. Condition: ready to use Type: drying system If you have any questions or require further information, please do not hesitate to send us a message or contact us by phone.

Condition: used, Year of construction: 2001, functionality: fully functional, For sale: a 1 kVA, three-phase, dry-type, resin-insulated ALSTOM transformer, manufactured in 2001. The transformer is designed to step down voltage from V to 400 V and is intended for use in transformer substations and for powering industrial installations. Technical data according to the nameplate: Manufacturer: ALSTOM Serial number: 281483 Year of manufacture: 2001 Rated power: 1 kVA Primary voltage: V Nodpfx Aj Ad Nc Dolnodc Primary voltage taps: / / / / V Secondary voltage: 400 V Primary side rated current: 28.9 A Secondary side rated current: 1443.4 A Frequency: 50 Hz Connection group: Dyn5 Windings: aluminum Cooling: AN – natural air cooling Insulation class: F Short-circuit voltage: 6% Maximum ambient temperature: 40°C Environmental class: E2 Climate class: C2 Fire resistance class: F1 Weight: 2515 kg Oil-free design, windings insulated with resin. The transformer is equipped with a steel frame and wheels for easy movement.

Year of construction: 2021, condition: new, functionality: fully functional, For sale is a complete, new, and never-installed industrial line for drying, steaming, and heat treatment of wood, purchased in 2022. The equipment is in factory condition and is manufactured by a top-tier Chinese manufacturer (Shandong Weifang Tenglong Heavy Industry / Annan Yifeng Boiler). This complete set represents a self-contained and ready-to-use system for highly efficient processing of sawn timber in large industrial capacities. KEY CAPACITIES AND LINE COMPONENTS: Wood dryers: 4 chambers, each with a capacity of 100 m³ (total of 400 m³ per cycle). Steaming/humidifying chamber: 1 chamber with a capacity of 50 m³ (for softening, color equalization, and stress relief in the wood). Steam boiler: Industrial biomass/wood chip steam boiler (Model DZH2-1.25-T), with a capacity of 2 tons of steam per hour. Associated equipment: All necessary fans, aluminum heat exchangers, pipelines, valves, and fully automatic PLC control cabinets. DETAILED TECHNICAL SPECIFICATIONS: Wood dryers (Model ZCM-Q100 - 4 units): External chamber dimensions: 8.00m (W) x 8.60m (D) x 5.60m (H). Construction: Internal and external walls made of high-quality aluminum (0.9 mm thick), with insulation of non-flammable rock wool (80 mm thick) and a supporting structure made of stainless steel (Inox). Ndjdpfxo Aayi Hj Alnec Ventilation per chamber: 5 axial, high-temperature reversible fans (3.0 kW power per fan, airflow 30,000 m³/h). Heating: 8 groups of bimetallic radiators (special aluminum finned tubes with seamless steel core). Steaming chamber (Model ZCL-Q50 - 1 unit): Capacity: approx. 50 m³. External dimensions: 5.50m (W) x 6.50m (D) x 5.00m (H). Equipped with a direct steam injection system under pressure, with 3 high-efficiency circulation fans and a sliding insulated door system. Biomass/wood chip steam boiler (Model DZH2-1.25-T): Steam capacity: 2 t/h. Pressure: Working 1.25 MPa / Test 1.65 MPa. Steam temperature: 194 °C. Fuel: Wood chips, sawdust, biomass, pellets. Automation: Full-auto PLC control systems (ZCUY-10 / ZCUY-12) with digital temperature monitoring (dry/wet thermometer) and automatic humidity and valve regulation.

Condition: new, functionality: fully functional, For sale: Huatai 1.5 TPD lecithin drying line with thin film evaporator and vacuum system. New / unused lecithin drying line for soybean lecithin processing, supplied by Huatai. The line is designed for vacuum drying of crude / wet lecithin and reduction of moisture under controlled temperature and vacuum conditions. Main equipment includes: Thin film evaporator / lecithin dryer Lecithin conditioning tank Finished product tank Hot water tank Lecithin cooler Vacuum pre-condenser Vacuum liquid seal tank Receiving / collection tanks Steam separator / steam distribution vessel Pumps, piping, valves and auxiliary equipment Electrical control cabinet / MCC Technical data: Capacity: approx. 1.5 TPD lecithin Process: vacuum drying / thin film evaporation Installed power: approx. 25.2 kW Product contact parts according to manufacturer specification Equipment finish: carbon steel vessels, painted industrial finish; stainless steel parts where required by process design Typical application: soybean lecithin drying crude lecithin moisture reduction vegetable oil refinery lecithin processing lecithin concentration after degumming food / feed / industrial lecithin processing The line is suitable for small and medium vegetable oil processors who want to add lecithin drying and value-added lecithin production to an existing degumming / oil refining process. The equipment is new and unused. Manufacturer: Huatai. EU seller: Leonagra s.r.o. EU invoice possible. Delivery to Europe can be arranged. The listing includes a process schematic and a realistic visual representation of the complete line. Final layout and painting colour can be coordinated before delivery. Inspection / video call with manufacturer can be arranged on request. Price: FCA / delivered EU by agreement, plus VAT where applicable. Zu verkaufen: Huatai 1,5 TPD Lecithin-Trocknungslinie mit Dünnschichtverdampfer und Vakuumsystem. Neue / unbenutzte Anlage zur Vakuumtrocknung von Sojalecithin. Die Anlage ist für die Trocknung von Rohlecithin bzw. feuchtem Lecithin unter kontrollierten Vakuum- und Temperaturbedingungen ausgelegt. Hauptkomponenten: Dünnschichtverdampfer / Lecithin-Trockner Lecithin-Konditionierungstank Fertigprodukttank Heißwassertank Lecithin-Kühler Vakuum-Vorkondensator Vakuum-Flüssigkeitsverschlussbehälter Auffang- / Sammeltanks Dampfverteiler Pumpen, Rohrleitungen, Ventile und Zubehör Ndjdpfx Aezivkbjlnec Schaltschrank / MCC Technische Daten: Kapazität: ca. 1,5 TPD Lecithin Verfahren: Vakuumtrocknung / Dünnschichtverdampfung Installierte Leistung: ca. 25,2 kW Industrieausführung mit lackierten Kohlenstoffstahlbehältern; Edelstahlteile dort, wo prozesstechnisch erforderlich Geeignet für Sojalecithin, Pflanzenölraffination, Lecithin-Trocknung nach Degumming und kleinere bis mittlere Ölmühlen / Raffinerien. Hersteller: Huatai. Verkäufer in der EU: Leonagra s.r.o. EU-Rechnung möglich. Lieferung nach Europa kann organisiert werden. Besichtigung / Videocall mit dem Hersteller auf Anfrage möglich. Preis: nach Vereinbarung, zzgl. MwSt.

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: Drymex S 5, functionality: fully functional, operating hours: 8,286 h, Beautiful, robust, and excellently maintained drying system, consisting of 2 units, 1 large drying chamber made of stainless steel with a perforated sheet metal floor incl. piping and the Blue Evolution XL steam cleaning device from Beam. Ideal for gentle drying of food (herbs, tea, wheatgrass), low-temperature drying with electricity (below 40°C), for indoor use only. The individual segments of the perforated sheet metal floor can be opened individually (for cleaning). In top condition, very solidly built. Dimensions: Units - 1.95 x 1.25 x 2.00 m, Drying chamber: 7.40 x 2.67 x 2.50 m. Stainless steel: 1.4301 The entire system is very well maintained, still assembled, and fully operational. Can be inspected at any time while powered on. The drying chamber can also be divided and connected to one unit each. This will provide you with two identical dryers. Price negotiable. Nodeyffqqopfx Alnedc

Condition: used, Year of construction: 1990, functionality: fully functional, overall weight: 9,700 kg, COGEIM E.O. 2000 VACUUM PADDLE DRYER – PHARMACEUTICAL DESIGN – 2,380 L High-quality horizontal vacuum paddle dryer from COGEIM, Italy, in a pharmaceutical design. The dryer features a horizontal, heated/cooled stainless steel container with a large front-opening lid, as well as a robust paddle agitator with scrapers. The parts in contact with the product are made of stainless steel 1.4435, and the inner surfaces are highly polished. The system is suitable for demanding drying, mixing, and vacuum processes in the pharmaceutical, chemical, and fine chemical industries. TECHNICAL DATA Manufacturer: COGEIM, Italy Njdpsr Nclaofx Alnodc Type: E.O. 2000 Year of manufacture: 1990 Project/Job No.: C.89/040 Working/Nominal volume: approx. 2,380 liters Total container volume: approx. 3,100 liters Container: Operating pressure: -1 / +6 bar Operating temperature: -20 / +165 °C Product-contact material: Stainless steel 1.4435 Inner surfaces: Highly polished HEATING/COOLING SYSTEM The container can be heated or cooled via an external half-pipe coil. Volume of heating/cooling chamber: approx. 150 liters Operating pressure of heating/cooling chamber: up to +6 bar Material of heating/cooling chamber: Stainless steel 1.4306 Temperature range: -20 / +165 °C AGITATOR Robust horizontal paddle agitator with scrapers Large-area mixing of the product Agitator shaft seal via mechanical seal Laterally arranged gearbox/motor drive EQUIPMENT / SCOPE OF SUPPLY The existing scope of supply includes, among other things: - Filter for solids / dust filter - Feed device - Discharge valve - Rotary valve - Compensator - Drive and gearbox - Pneumatic fittings and components - Large front-opening lid - Support frame - Existing connection components - Existing technical documentation - Original installation/connection drawing The large front lid provides very good access to the interior and to the agitator for inspection, cleaning, and maintenance. CONDITION Used system in operational condition. The interior and the paddle agitator appear to be in very good condition in the available images. Technical documentation and original drawings are available. Further technical information, detailed photos, and excerpts from documentation can be provided upon request.

Condition: used, Year of construction: 2004, Equipment: type plate available, A complete drying unit MOTAN - LUXOR 1200 A (Line C) is for sale consisting of: 1x crystallizer: hopper 1200 PET A (1.2m³) including agitator + heating unit ETA Box including air filter 1x dryer: hopper 3600 PET (3.3m³) including heating unit ETA Box -1400 1x dry air generator 1200 - control unit including air filter 2x conveyor device HLX-30-1 1x coupling station 2x air washer 1x conveyor fan RIETSCHLE including MOTAN central filter F30 System features: - Capacity UP TO 20t/day - Dry air volume 1200m3/h - Dew point control - 2 cartridge dryers for residual moisture up to 0.003% - Technical documentation The system is 2x available Subject to prior sale Ndsdpsuakr Hjfx Alnec Please send inquiries by email only Note: The machine is still installed and can be inspected on site. The buyer must remove it himself and organize shipping. This is not part of the offer price.

Year of construction: 2014, condition: good (used), power: 260 kW (353.50 HP), color: yellow, machine/vehicle number: 214034, Painting-drying booth with semi-vertical air flow "ITALO-1-SV", brand Lackro, manufacturer Eco-Air Technology S.R.L. Italia, year of manufacture: 2014 Cabin interior dimensions: length 14.06 m X width 5.04 m X height 4 m, maximum air flow: 40-45000 mc/h, thermal power: 260 Kw, fuel: diesel, installed electric power: 26 Kw three-phase, tank fuel included, the cabin has a special lighting system, 30 superior filter cells for purification with carbon, dimensions: 500x500x50 mm, side service door, two central hinged doors, trolley for parts, burner chimney on diesel, the cabin has the user and maintenance manual Attention customers: this cabin will be delivered disassembled and loaded for transport from our company headquarters in Oradea. Industrial drying painting cabin "ITALO-I-SV" MOD. ECO – L=14,060 mm x w=5,040 mm x H=4,000 mm with semi-vertical air flow Suction group Suction and filtration unit ECO-SM-5 Nedpfep S Tlhox Alnodc Maximum air flow at 250 Pa m3/h 40,000-45,000 Maximum thermal power kW 260 VATRA 232 Fuel type DIESEL Installed three-phase electric power: kW (2x7.5) +(2x5.5) Filter cells 500 mm x 500 mm x 500 mm 30 pieces Bag filter Ǿ 280 x 1000 mm pieces 10 Ceiling grid 975 x 1855 mm 28 pieces Generator pre filters 1,000 mm x 800 mm x 50 mm pieces 2 Andreae suction wall filter 0.9 m x 5 m pieces 3 The maximum size of the piece in the cabin L=12 m x w=3 m x H= 3.2 m For any details, do not hesitate to contact me by phone. Price 79.900 Euro + VAT, Ex Works Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, UV drying system Totalisator operating hours 1484 Ndodpfx Aezr I U Dslnsc The system was connected to a Heidelberg GTO 52 with LACO 52-Lackiersystem. No direct connection to the pre-machines/devices is required. It is a used UV lamp ADNOS 04204B4 (current designation ADS 53-160) installed.

Condition: excellent (used), Year of construction: 2012, operating hours: 350 h, functionality: fully functional, machine/vehicle number: R-3176, overall weight: 5,500 kg, total width: 1,400 mm, total length: 7,000 mm, temperature: 200 °C, power: 6 kW (8.16 HP), type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, For sale is a Binder DRYON DRVF 1400×7 fluidized bed/vibrating dryer for wood chips, compost, biomass, wood shavings, and comparable bulk materials. The system was used exclusively for testing purposes and has only approximately 300–400 operating hours. It is in good condition and fully functional. Key data: (The system has previously been used for steam drying with superheated steam at approximately 200 °C. Conversion to other drying media, such as air or flue gas, is possible in principle with appropriate modifications.) - Dryer width: approx. 1,400 mm - Overall length: approx. 7,000 mm - Input capacity: approx. 2,000 kg/h wet (designed for green waste) - Output capacity: approx. 1,200 kg/h dry (designed for green waste) - Water evaporation: approx. 667 kg/h (designed for green waste) - Output moisture content: ≤ 10% (designed for green waste) - Installed electrical power: approx. 6 kW - Weight: approx. 5,500 kg Upon request, additional components for a complete drying unit can be purchased. These include a filter system, a high-performance radial fan, and the associated drive motor. (see planning drawing) Filter system: NESTRO Lufttechnik GmbH, Type Jet 9525, year of manufacture 2013, factory number FA169096, filter area 282.6 m², max. compressed air 6.0 bar, category EK004182, weight approx. 8,000 kg. Fan / drive motor: Nedpfx Alszg Dx Usnodc High-performance radial fan Type HRV28-450 with drive motor VEM motors GmbH, Type IE2-W21R 315MX2, year of manufacture 02/2013, motor number 180022/0001 H, power 160 kW / 218 HP, voltage 400 V, current 274 A, speed 2,973 min⁻¹, frequency 50 Hz, protection class IP55, insulation class 155, weight approx. 955 kg.

Condition: used, Wilo DL-E 100/145-11/2-S1 Dry-running Twin Pump Dry-running twin pump in an inline design for pipe installation or base mounting, with an integrated frequency converter for electronic control, among other things, for constant or variable differential pressure (Δp-c/Δp-v). Design Electronically controlled dry-running twin pump in an inline design with flange connection and automatic performance adjustment. Application Pumping of heating water (according to VDI 2035), cold water, and water-glycol mixtures without abrasive substances in heating, cold water, and cooling systems. Equipment/Function Operating modes Δp-c for constant differential pressure Δp-v for variable differential pressure PID control Controller operation (n=constant) Manual control mode Setting of the differential pressure setpoint Setting of the speed (manual control mode) Setting of the operating mode Setting pump ON/OFF Configuration of all operating parameters Error acknowledgment External control functions Control input "Priority OFF" Control input "External pump switchover" (only effective in twin pump operation) Analog input 0-10 V, 0–20 mA for controller operation (DDC) and remote setpoint adjustment Ndodswbqrtopfx Alnjc Analog input 2–10 V, 4–20 mA for controller operation (DDC) and remote setpoint adjustment Analog input 0–10 V for actual value signal of the pressure sensor Analog input 2–10 V, 0-20 mA, 4–20 mA for actual value signal of the pressure sensor Alarm and display functions Collective fault message SSM Collective operating message SBM Data exchange Infrared interface for wireless data exchange with IR monitor/IR stick Slot for Wilo IF modules (Modbus, BACnet, CAN, PLR, LON) for connection to building automation Safety functions Full motor protection with integrated tripping electronics Access lock Twin pump management (twin pump or 2 x single pump) Main/standby operation (automatic fault switchover) Main/standby operation, pump switchover after 24 hours Addition operation Addition operation (efficiency-optimized peak load switching on/off) Your advantages Energy savings thanks to integrated electronic performance adjustment Easy operation thanks to Green Button technology and display Various operating modes: main/standby operation and parallel operation Configurable error behavior tailored to heating and air conditioning applications Integrated full motor protection (FMP) with tripping electronics Drive Power connection 3~380 V, 50/60 Hz 3~400 V, 50/60 Hz 3~440 V, 50/60 Hz Motor efficiency class: IE4 Power input P1 max: 13000 W Motor rated power P2: 11 kW Current (max) Imax: 21 A Speed max. nmax: 2970 1/min Emitted interference EN 61800-3 Immunity to interference EN 61800-3 Insulation class: F Motor protection: IP55 Motor protection: FMP integrated Installation dimensions Installation length L0: 500 mm Suction-side pipe connection DNs: DN 100 Discharge-side pipe connection DNd: DN 100 RRP: 29,006.25 € More items, new and used - find them in our shop! International shipping costs on request!

Condition: used, Model MDH 2 Hosokawa Micron Dryer Flash Drying of Filter Cakes, Powders and Granules. Nodpfxszvxvas Alnjdc Model MDH 2 Micron Dryer manufactured by Hosokawa Micron. Machine was built in 1995 for a pilot plant operation drying a Precipitated Calcium Carbonate (PCC) Filter Cake. The dryer ran periodically for around 2 years and has been in storage ever since. Installed Power – 30 kW (Rotor) 2,2 kW (Classifier) Airflow - 3,000 m3/hour Evaporative 310 kg H2O/hour Capacity - Scope of supply includes agitated twin screw feeder and lubrication system (for rotor drive). In-built dynamic classifier provides control on particle size and retention time. Equipment is offered in "as is" condition with no warranty given or implied. PPDS can offer full refurbishment services. Inspection is invited at our premises in Uttoxeter, Staffordshire, United Kingdom (close to East Midlands, Birmingham and Manchester airports). Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience we aim to deliver projects that meet and indeed exceed clients expectations. We have satisfied customers throughout the world, including, the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Please check out our other listings and subscribe to our stock list.

Condition: new, XPLAN is the result of nearly 50 years of Incoplan’s experience in providing a highly efficient and energy-saving method for drying wood, worldwide, in all climate conditions. Compared to conventional air exchange systems, condensation drying with XPLAN requires approximately 60% less electrical energy. This is a gentle drying method, particularly suitable for hardwoods and softwoods, allowing their characteristics to be preserved. XPLAN is available in 3 versions: LITE, up to 10 m³ STANDARD, with additional fans for tunnel structures PRO, up to 20 m³ of wood. Build or purchase your own structure, install and connect XPLAN, and start your drying process. We provide a complete design for the ideal chamber to be built, material suggestions, and all the information you need. The images show the three versions, with suggestions for the homemade chamber structure and walls. The electrical cabinet is always included and connected to the machine. The software is automatic, touchscreen-operated, and contains several preloaded drying programs. TECHNICAL DATA SPECIFICATION COMPRESSOR NOMINAL HP 1.5 kW SHIPPING WEIGHT 154 kg AUXILIARY HEAT 4 kW INTERNAL BLOWER MOTORS 0.25 kW motor; airflow 3,060 m³/h HEAT TREATING CAPABILITIES Yes, up to 71° C (only with Heat booster) CIRCULATING FANS 2 included: 400 mm fans, 0.25 kW, 3,060 m³/h each Nsdpfx Ajw Ug Atjlnodc POWER REQUIREMENTS 5.8 kW (28A) - 400 V 50 Hz (1-phase) DIMENSIONS (H X L X W) 94 × 83 × 52 cm (base unit only) 1 power vent system included (includes exhaust and intake) DRYING TIME 25mm Green Pine - 80% to 8% in approximately 12 days. 25mm Green Oak - 65% to 8% in approximately 35 days. LOAD CAPACITY For softwoods and fast-drying hardwoods (Pine or Poplar) 3-5 m³ For slow-drying hardwoods (Oak) 10 m³ NOMINAL WATER REMOVAL RATE 114 kg per 24 hours - 5 l/h

Condition: new, input voltage: 220 V, input frequency: 50 Hz, type of input current: three-phase, temperature: 75 °C, total length: 1,500 mm, total width: 1,300 mm, total height: 2,250 mm, overall weight: 230 kg, control type: PLC-controlled, actuation type: electric, fuel type: electric, Airplan – Modular Drying Kit for Containers – For Drying Lumber, Pallets, and Firewood Airplan is the easiest and most cost-effective way to dry wood, pallets, or firewood. It is a ready-to-install kit designed to be mounted inside a container (adapted to our supplied drawing), with a capacity of up to 15-20 cubic meters and a length of 6 meters for wood stacks. Main components: - 2 or 3 industrial axial fans for controlled air circulation - Electric heating element kit for reliable heat supply - 2 automatic dampers to optimize air exchange and humidity control - Electrical control panel with drying software interface and all necessary power/control connections - Water spray pipe and nozzles Key benefits: - Transform a standard container into a drying kiln - Minimum capital expenditure – buy only the essentials, not a complete prefabricated kiln - Reduced transport costs thanks to the compact kit format - Fast, straightforward installation and user-friendly operation - Professional-grade components and top-quality materials for long service life Nedpjxnbctjfx Alnedc - Precise drying control suitable for lumber and pallet production What we provide: Complete Airplan kit (components listed above) Structural drawing and installation guidelines Basic start-up assistance and commissioning instructions Next steps / Contact: For a quote, technical details (electrical requirements, power ratings), and the structural drawing, please contact us with your desired drying capacity and the intended enclosure dimensions. We will tailor the configuration and provide a detailed offer.

Condition: new, Model MDH 3 Hosokawa Micron Dryer Flash Drying of Filter Cakes, Powders and Granules. Model MDH 3 Micron Dryer manufactured by Hosokawa Micron. Installed Power – 45 kW (Rotor) 2,2 kW (Classifier) Airflow - 6,000 m3/hour Evaporative 600 kg H2O/hour Nsdpfszvxxnex Alnodc Capacity - Scope of supply includes agitated twin screw feeder, natural gas fired air heater and lubrication system (for rotor drive). In-built dynamic classifier provides control on particle size and retention time. Equipment is offered in "as is" condition with no warranty given or implied. PPDS can offer full refurbishment services. Inspection is invited at our premises in Uttoxeter, Staffordshire, United Kingdom (close to East Midlands, Birmingham and Manchester airports). Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience we aim to deliver projects that meet and indeed exceed clients expectations. We have satisfied customers throughout the world, including, the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Please check out our other listings and subscribe to our stock list.

Condition: excellent (used), Year of construction: 2025, functionality: fully functional, CARRIER 09VE 1064 WATER DRY COOLER – YEAR 2025 Industrial Carrier dry cooler featuring a V-shaped coil, two independent water circuits and axial fans. Supplied with a steel support frame, electrical control panel and DN 65 hydraulic connections. TECHNICAL DATA Manufacturer: Carrier Model: 09VE 1064 UI 1270A9B 12A1V1 CU Product reference: 7416018.702174 Serial number: 04136261/0001 Year of manufacture: 2025 Working fluid: Water Number of circuits: 2 Volume per circuit: 120 litres Maximum working pressure: 13 bar Maximum temperature: 110 °C Hydraulic connections: DN 65 Nedpezvf Ebofx Alnedc Power supply: 400 V / 3-phase + N / 50 Hz Electrical power input: 35 kW Rated current: 46.8 A Weight: 1,340 kg PED: 2014/68/EU PED classification: Article 4.3, Group 2 liquid Certifications: CE, UKCA and EAC The unit is installed outdoors and available for inspection. The scope of supply includes the dry cooler and its electrical control panel.

Condition: used, Year of construction: 2010, operating hours: 15,000 h, machine/vehicle number: M312, Technical Specifications and Performance Data This pre-owned monoblock is manufactured by Omar and integrates drying, capsule application, and self-adhesive labeling functions into a compact rotary system designed for professional beverage production. The machine is equipped with a double capsule applicator with rotating heads for precise capsule application and three self-adhesive labeling units for front, back, and neck labels. It is ideal for presenting high-quality wines and can be integrated into a used bottling line or as a stand-alone module in an industrial packaging environment. Manufacturer: Omar Model: Simphony Washer-Dryer Year: 2010 Configuration: Drying module + double capsuling unit with rolling heads + 3 self-adhesive labeling stations (front/back/neck) Bottle Formats: Compatible with Bordeaux and Burgundy bottles Label Application: Pressure-sensitive (self-adhesive) for front, back, and neck Container Type: Glass bottles Format Examples: Reference capacity 0.5 L Application: Suitable for integration into beverage production lines and industrial filling Advanced Automation and Control Systems The monoblock is designed for synchronized operation of the drying, capsuling, and labeling units. The self-adhesive labeling stations ensure precise application with fine adjustment for front, back, and neck labels. The double capsuling stations with rolling heads ensure consistent finishing quality on wine capsuling units. Rapid mechanical adjustments support the changeover from Bordeaux to Burgundy bottles, improving production flexibility in existing bottling lines. Production Line Integration Capability Designed for in-line operation, the unit interfaces upstream with fillers and capping/closing machines and downstream with inspection and packaging equipment. It adapts to standard conveyor logistics, enabling smooth transfer of glass bottles. Format changes between compatible wine bottle geometries are supported, making the machine suitable for multi-SKU beverage production. Machine Condition and Maintenance History The machine has undergone a thorough restoration, which included purchase, transport, and recommissioning, resulting in a fully functional and reliable second-hand asset. It is ready for use in a production setting, suitable for rapid integration into an existing bottling line. Operational Performance and Versatility Optimized for glass wine bottles, the monoblock combines drying, precise capsule application with rolling heads, and three-point self-adhesive labeling. This configuration supports premium packaging standards and is suitable for wineries and beverage producers seeking consistent presentation quality in an industrial packaging environment. Installation Requirements and Site Preparation The rotary machine’s compact footprint allows for easy placement within typical bottling rooms. Connection to existing conveyor belts and utilities is recommended for optimal integration. The site layout must allow for safe operator access around the guards and clear spaces for format changeovers and routine maintenance. Ndodpfoygh I Usx Alnec Certification of Conformity and Safety Standards The monoblock includes protective guards around the moving units, with standard operator guards and emergency stop functions typical of modern bottling...

Condition: new, No. 3171 Vacuum drying kiln ISVE ES 2 / NEW New machine, delivery time 120 days Construction features: AISI-304 stainless steel, partially insulated External diameter: 1000 mm Ndodpfsuvi Saex Alnec Length of cylindrical part: 5000 mm Dryer length: 5900 mm Dryer total length plus sliding guides: 11000 mm Max. operating vacuum: -730 mm Hg Timber pile length: 5000 mm Timber pile width: 800 mm Timber pile height: 400 mm Net wood volume: approx. 2 m3 Installed electrical power: 5,27 kW Average hourly power input: 2,7 kW/h Includes: - 6 electric heating plates (each 800 x 5000 x 10 mm LWH / 40 kg / 0,695 kW) - 1 oil vacuum pump (40 m3/h / 1,1 kW / 380 Vca) - 1 vacuum pump condenser (stainless steel tube with internal condensation system) - 2 one-way valves (clapet: one ¾” for vacuum circuit; one ½” for condenser discharge) - 1 solenoid air return valve (24 Vca: one 1” for the autoclave and one ½” for the condenser) - 1 manual air return (1” ball valve) - 1 electrical control panel (PLC type Siemens S7-1200, with touch panel) - 1 ISVE server connect with remote service and control - 2 wireless moisture probes (double probes for core and surface moisture reading) - 1 wireless temperature probe (for wood core reading) - 2 plates-holder stands - 1 instruction booklet (in English with CE certificate and wiring diagrams) Transport dimensions approx. 6100 x 1150 x 1300 mm LWH Weight approx. 1300 kg Technical details, year of construction and scope of delivery according to the manufacturer, without guarantee Subject to prior sale New machines are covered by the manufacturer's warranty Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: new, No. 3187 Vacuum dryer / drying chamber ISVE ES 5 / NEW New machine, delivery time 120 days Construction features: AISI-304 stainless steel, partially insulated External diameter: 1600 mm Length of cylindrical part: 5000 mm Dryer length: 5900 mm Dryer total length plus sliding guides: 11000 mm Max. operating vacuum: -730 mm Hg Nsdpfx Aevc Axpelnodc Timber pile length: 5000 mm Timber pile width: 1100 mm Timber pile height: 990 mm Net wood volume: approx. 5 m3 Installed electrical power: 16,01 kW Average hourly power input: 8 kW/h Includes: - 12 electric heating plates (each 1100 x 5000 x 10 mm LWH / 57 kg / 1,25 kW) - 2 internal condensers (turbofan of 0,55 kW each 380 VCa with stainless steel pipes) - 1 one-way valve (clapet: one ¾” for vacuum circuit) - 1 solenoid air return valve (24 Vca: one 1” for the autoclave) - 1 manual air return (1” ball valve) - 1 electrical control panel (PLC type Siemens S7-1200, with touch panel) - 1 ISVE server connect with remote service and control - 2 wireless moisture probes (double probes for core and surface moisture reading) - 1 wireless temperature probe (for wood core reading) - 2 plates-holder stands - 1 instruction booklet (in English with CE certificate and wiring diagrams) Transport dimensions approx. 5900 x 1620 x 2300 mm LWH Weight approx. 2900 kg Technical details, year of construction and scope of delivery according to the manufacturer, without guarantee Subject to prior sale New machines are covered by the manufacturer's warranty Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: new, No. 3183 Vacuum dryer / drying chamber ISVE ES 3 / NEW New machine, delivery time 120 days Construction features: AISI-304 stainless steel, partially insulated External diameter: 1300 mm Length of cylindrical part: 5000 mm Dryer length: 5900 mm Dryer total length plus sliding guides: 11000 mm Max. operating vacuum: -730 mm Hg Timber pile length: 5000 mm Timber pile width: 800 mm Timber pile height: 790 mm Net wood volume: approx. 2,5 m3 Installed electrical power: 8,80 kW Average hourly power input: 4,4 kW/h Includes: - 9 electric heating plates (each 800 x 5000 x 10 mm LWH / 40 kg / 0,695 kW) - 1 oil vacuum pump (65 m3/h / 1,8 kW / 380 Vca) - 1 vacuum pump condenser (stainless steel tube with internal condensation system) - 2 internal condensers (turbofan of 0,37 kW each 380 VCa) - 2 one-way valves (clapet: one ¾” for vacuum circuit; one ½” for condenser discharge) - 1 solenoid air return valve (24 Vca: one 1” for the autoclave and one ½” for the condenser) - 1 manual air return (1” ball valve) - 1 electrical control panel (PLC type Siemens S7-1200, with touch panel) - 1 ISVE server connect with remote service and control - 2 wireless moisture probes (double probes for core and surface moisture reading) - 1 wireless temperature probe (for wood core reading) - 2 plates-holder stands - 1 instruction booklet (in English with CE certificate and wiring diagrams) Transport dimensions approx. 5900 x 1300 x 2000 mm LWH Weight approx. 2000 kg Technical details, year of construction and scope of delivery according to the manufacturer, without guarantee Subject to prior sale New machines are covered by the manufacturer's warranty Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location Ndjdju Tipkspfx Alnjc

Condition: new, Wilo CronoLine-IL 50/270-4/4-S1 Single-Stage Dry-Running Centrifugal Pump Single-stage dry-running centrifugal pump in an inline design for pipe installation or base mounting. Low-vibration and low-noise block design with lantern and a rigidly connected standard flange motor. Equipped with a forced-circulation, direction-independent bellows mechanical seal and a cavitation-reducing impeller. Flanges with pressure gauge connections R 1/8. Manufacturer: Wilo Product name: CronoLine-IL 50/270-4/4-S1 Net weight approx.: 101 kg Item number: 2171212 Operating data Min. medium temperature Tmin: -20 °C Max. medium temperature Tmax: 140 °C Min. ambient temperature Tmin: -15 °C Njdpfx Alopgq Dksnedc Max. ambient temperature Tmax: 40 °C Maximum operating pressure PN: 16 bar Design note: 16 bar up to 120 °C, 13 bar up to 140 °C Minimum efficiency index (MEI): ≥0.4 Motor data Motor efficiency class: IE3 Mains connection: 3~400 V, 50 Hz Voltage tolerance: ±10 % Rated motor power P2: 4000 W Rated speed n: 1450 1/min Rated current IN: 8.2 A Power factor cos φ: 0.79 Motor efficiency ηM 50%: 85.8 % Motor efficiency ηM 75%: 87.6 % Motor efficiency ηM 100%: 88 % Insulation class: F Enclosure: IP55 Installation dimensions Suction-side pipe connection DNs: DN 50 Discharge-side pipe connection DNd: DN 50 Length l0: 440 mm PSH3R6Cright You can find more pumps – new and used – in our shop! International shipping costs available upon request!

Condition: new, Year of construction: 2025, functionality: fully functional, Equipment: lighting, Modern painting systems and drying rooms must meet higher requirements than just a few years ago. The use of new coating systems, such as hydro-based paints, polyurethane resins, and epoxy-zinc powder or epoxy-iron glitter paints, demands advanced paint room solutions. A key aspect is the workpiece transport to the painting system and further processing. Our engineers offer expert guidance, whether it's dry overspray removal, wet washing, air humidification, or air drying, condensation drying at low temperatures, or hot air drying. We also provide pre-treatment solutions such as high-pressure washing with water circulation systems or compressed air blasting or wheel blasting techniques. Key Components of a Modern Painting System: Painting Booth: The key element of our system, equipped with advanced air filtration and ventilation systems to ensure a dust-free environment for top-quality results. 🎨 Air Treatment: Essential for maintaining the air balance in the spray booth by drawing in filtered air to replace the air exhausted by the ventilation system. 🌬️ Exhaust System: Removes overspray and volatile organic compounds (VOCs) from the booth, ensuring good air quality and operator safety. 🌿 Drying & Curing Oven: After painting, parts are transferred to the oven to cure and obtain a durable, high-quality surface. 🔥 Conveyor System: An automated conveyor moves parts from the spray booth to the oven, ensuring efficiency and consistency. 🚜 Control Panel: The brain of the system, where the operator controls everything from ventilation to temperature and conveyor speed. ⚙️ Lighting: LED-based lighting provides excellent visibility while also offering energy savings. 💡 Why Choose Our Painting & Drying Systems: Quality: Carefully designed with advanced features to ensure greater efficiency and performance. 🎯 Safety First: Efficient exhaust systems, fire suppression, and fire-resistant materials ensure a safe working environment. 🛡️ Customization: We offer customizable solutions that cater to your specific needs and preferences. 🛠️ Easy Maintenance: Our systems are designed to be easy to maintain, with durable and easy-to-clean materials. 🔧 Excellent Support: We provide top-notch customer service and technical support for installation, troubleshooting, and optimal maintenance. 🧰 Environmental Responsibility: Our systems are designed to be energy-efficient and environmentally friendly, minimizing pollution and making them a sustainable choice for surface treatment. 🌍 Complete Solutions for Painting Systems: Conveyor Systems: Automated transport systems for painting and blasting booths, with intersections and switching systems for parts up to 2000 kg. 🚛 Easy-to-Replace Filters: Painting booths with ceiling exhausts and easy-to-replace filter elements. 🧹 Versatile Heating & Drying Solutions: Heating options include oil, gas, or electrical heating, as well as cross-flow heat exchangers and activated carbon filters for solvent-heavy processes. 🌡️ Ndsdjun R Ufjpfx Alnec Integrated Paint Supply System: An integrated paint supply system with airless pumps for full coverage in the painting booth. 🎨 Our complete solutions provide everything you need for efficient and safe painting operations. Get in touch with our experts today to optimize your painting system!

Condition: excellent (used), Year of construction: 2026, machine/vehicle number: 62401, functionality: fully functional, total length: 7,050 mm, total width: 2,550 mm, total height: 2,500 mm, overall weight: 3,400 kg, Dry wood chips, firewood and other coarse, wet biomass in a container that goes straight onto your truck, with warm air blown through the perforated floor. This Lauber TroCo drying container was built in 03/2026 and has been used only three times by us. It is in very good condition and ready to dry. Only one unit available. This is a single used machine, not ongoing stock. Once sold, it is gone. Best for: drying coarse, wet biomass such as wood chips, firewood and other coarse plant material, then moving the container to where you need it with a hooklift truck. Not suitable for: finely ground bulk material unless you verify it with us first. A warm air source and the air hose are not included, you need to supply them. What the specifications mean in practice: - 34 m3 volume - one large batch per drying cycle instead of many small ones - Hooklift system (locking dimension 3,890 mm) - load, move and unload with a standard hooklift truck, no crane needed on site - Perforated ventilation floor with round air connection at the door end - warm air is pushed up through the whole load, so it dries evenly - Fitted tarp cover - keeps rain out during storage and transport - Rear rollers and ladder steps on the front - easier to roll off and to inspect the load - Gross weight rating 21,000 kg - heavy loads are no problem for the frame Technical data (from the nameplate): - Manufacturer: Lauber Trocknungstechnik, type TroCo, serial no. 62401 - Year built: 03/2026 - Volume: 34 m3 - Length: 7,050 mm, height: 2,500 mm - Empty weight: 3,400 kg, permissible gross weight: 21,000 kg - Locking dimension: 3,890 mm - Colour: yellow - Safety inspection label (DGUV Rule 114-010) from the container builder is fitted, see nameplate photo Ndedpfx Ajz I Dzielnjc Condition: Built 03/2026, used only three times by us, very good condition. Fully functional. Location: Stanserstrasse 50, 6064 Kerns (self pick-up, transport by arrangement). A hooklift truck, a suitable forklift or a crane is needed for loading. The container weighs approx. 3,400 kg empty. Why you can buy with confidence: - Built 03/2026, used only three times - Used by us, not rented out - Nameplate photos available, in-person inspection in Kerns OW by appointment Inspect before you buy: you may verify identity, condition and completeness at inspection or pickup. We guarantee what we control: the machine is what this listing says it is. We do not promise performance in an application we cannot assess, which is why we ask about yours first. Why buy now: This is a single used unit. Once sold, it is gone. Inspection is available in Kerns OW by appointment. First-buyer bonus: buy within the next two weeks (until 20 October 2026) and we take CHF 500 off the price. Valid until 20 October 2026, or until the machine is sold. Action: Send us your intended material, batch size and destination. We will confirm suitability and give you a transport estimate.

Condition: like new (used), Year of construction: 2008, operating hours: 125 h, functionality: fully functional, Cold Jet Aero 75 DX Machine – Like New This machine is suitable for industrial cleaning applications, including both small and very large projects. A key advantage of this machine is that it does not rely on the latest generation of electronics. It is one of the most powerful machines on the market and is in excellent condition. Cold Jet Aero 75 DX Dry Ice Blasting Machine – Complete with the following equipment: COLD JET AERO 75 DX DRY ICE (125 HOURS OF USE) 1 x 20’ Blasting Hose 1 x Coldjet Applicator Ndedj Ad U Acjpfx Alnjc 2 x Nozzles – NEW One of the best machines in the world, with no electronics. This is what makes it reliable, and also keeps maintenance costs down. For inquiries or to arrange a viewing, please contact us at DrDryice. All machines sold come with a 1-year warranty. We also offer repairs and maintenance for Cold Jet machines. We also supply new Cold Jet machines. Contact us for more information. Worldwide shipping available. Cold Jet dry ice machine for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal with dry ice, coating removal with dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.