Used Soraluce Fr-6000 for sale (3,913)

Condition: like new (used), Year of construction: 2020, operating hours: 12,000 h, functionality: fully functional, machine/vehicle number: 5645, travel distance X-axis: 6,000 mm, travel distance Y-axis: 4,000 mm, travel distance Z-axis: 1,600 mm, feed rate X-axis: 25,000 m/min, feed rate Y-axis: 25,000 m/min, feed rate Z-axis: 25,000 m/min, total length: 6,550 mm, table length: 2,500 mm, table width: 2,500 mm, total width: 15,900 mm, spindle speed (max.): 4,000 rpm, total height: 11,500 mm, overall weight: 57,000 kg, working range: 2,500 mm, grinding spindle motor power: 46,000 W, Ladies and Gentlemen, Lasdpfx Ajttri Tjcfjf Enclosed we advertise our portal bed milling machine. Installation winter 2019/2020. 12,000 operating hours. Price on request. The machine is currently still in operation. The price is for the machine only. Dismantling, transportation and installation are the responsibility of the buyer. We are looking forward to serious inquiries. Many thanks in advance.

Condition: used, Year of construction: 1999, x-travel 12000 mm y-travel 3600 mm z-travel 1500 mm spindle turning speed range 3000 U/min Control: Heidenhain iTNC430 Milling head 2 axes, indexed 2.5° Vertical (Y-axis): 3600 mm Transverse (Z-axis): 1500 mm Longitudinal (X-axis): 12,000 mm Guide rail length: 14,700 mm Guide rail width: 1400 mm Lowest milling position of the spindle nose measured from the floor (head horizontal): 855 mm Low column design 870 x 900 x 2,625 mm: 3,000 kg High stand design 870x900x3,025 mm: 3,500 kg Motor power: 37 kW Mounting: ISO 50/ DIN 69871-A Speeds: 11.7:231:3000 rpm Feed range: 2:2500 mm/min Rapid traverse X-axis: 12000 mm/min Z-Y axis: 15000 mm/min Feed motor power X-axis: 55 Nm Z-axis: 37 Nm Y-axis: 37 Nm Lajdpfxjxwdygo Acfsf Accuracy Positioning accuracy: 0.025 mm Repeatability: 0.015 mm Weight: approx. 42,000 kg Air supply to the machine: 300 L/min at 4.5 bar NOTE: The clamping plates and chip conveyors are not included in the scope of delivery. However, we can offer you both used and new clamping plates and chip conveyors on request.

Year of construction: 2011, condition: ready for operation (used), Travel X/Y/Z: 5500mm/1200mm/1800mm, milling head indexing: 2.5°, drive power: 28kW, spindle speed: 4000rpm, feed X/Y/Z: 25m/min, table diameter: 1600mm, table speed: 250rpm, max. workpiece weight: 8000kg, panel field dimensions X/Y/Z: 6000mm/2000mm/300mm, machine weight: approx. 16500kg, control: Heidenhain iTNC 530. Workpiece weight: 8000kg, panel field dimensions X/Y/Z: 6000mm/2000mm/300mm, machine weight: approx. 16500kg, control: Heidenhain iTNC 530. Including internal coolant supply and chip conveyor. Documentation available. On-site inspection is possible. Ljdpfx Acsvx Twuofoaf

Condition: excellent (used), Year of construction: 2009, x-travel 6000 mm y-travel 2100 mm z-travel 1500 mm control HEIDENHAIN iTNC 530 feed 2- 20 m/min spindle turning speed range 20 -4000 U/min table dimension - longitudinal 7000 mm table dimension - cross 2000 mm total power requirement 79 kW weight of the machine ca. 55 t dimensions of the machine ca. 15 x 7 x 4,6 m The SORALUCE FP6000 is in very good condition. accessories as option: # clamping angle: 5'000.-€ # Clamping cube: 2'000.-€ # Div. tools & workbench: 2'000.-€ Description: - CNC control: HEIDENHAIN ITNC 530 Orthogonal milling head: - Tool holder: ISO 50, DIN69871 AD - Automatic tool clamping: Clamping force 20,000 N - Indexing accuracy / repeatability: ± 3 sec. == ± 0.002 mm - Tightening bolt: DIN 69872 form A - Number of swivel positions: 1 x 1 ° milling head ( 360 positions rear plane, 270 positions front plane) 270 positions front plane) - Diameter spindle bearing: 90 - Sealing air: 0,7 bar Main drive: - Drive type: three-phase motor - Drive power: 100 % ED 32 kW spindle: - Spindle speed: 20 - 4000 rpm - Full power from: 340 rpm - Torque at 32 kW/S1: 910 Nm - Speed control: 2 ranges infinitely variable via star/delta connection Rapid traverse: max. 35000 mm/min Lajdovwgl Ajpfx Acfef

Condition: reconditioned (used), Year of construction: 2006, travel distance X-axis: 5,500 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 15 rpm, table width: 1,200 mm, table length: 6,000 mm, RepairFIT by Dornhöfer The difference. Including installation & commissioning! Machine year of manufacture: 2006 Capacities / Travel: Longitudinal (X): mm 5,500 Vertical (Y): mm 1,400 Lateral (Z): mm 1,000 Work table: Length: mm 6,000 Width: mm 1,200 Number of T-slots on the table surface: pieces 12 Width of T-slots: mm 22 Distance between slots: mm 100 Max. workpiece weight: kg 13,500 NC rotary table: Position: Right, flush integrated into the table surface Clamping surface: Ø mm 1,000 Positioning accuracy: ° 360x0.001 Max. workpiece weight: kg 3,500 Number of T-slots: pieces 9 Size of T-slots: mm 22 Distance of T-slots: mm 100 Paint finish: RAL 7035 light gray / RAL 5011 steel blue Tool interface: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Main drive: Drive power: 100% ED KW28 Spindle speed range: Spindle speed: min-1 15 - 5,000 Torque: Nm 815 Feeds: X, Y and Z axis mm/min 2 – 10,000 Max. rapid traverse speed: X, Y and Z axis mm/min 25,000 Max. feed force: N 10,000 Footprint FLC6000: m (approx.) 11.0 x 5.6 Overall height: m (approx.) 3.5 Weight: kg approx. 35,000 Laodpfjy Tkgbex Acfof HEIDENHAIN iTNC 530 HSCI Automatic MTE milling head, diagonal Automatic tool changer Chip conveyor Coolant system with 70 bar & (IKZ) RepairFIT is our proven offer for a profitable entry into our product lines. The machines available in this line are procured by us after a strict selection process and undergo a thorough inspection (deep-dive check). After intensive cleaning, the identified obvious defects and errors were professionally repaired by our expert service team.

Condition: used, Year of construction: 2023, functionality: fully functional, travel distance X-axis: 14,000 mm, travel distance Y-axis: 4,500 mm, travel distance Z-axis: 1,900 mm, RepairFIT by Dornhöfer The Difference. Installation & Commissioning Included! Year of manufacture of the machine: 2023 Capacities / Travel distances: Longitudinal (X): 14,000 mm Vertical (Y): 4,500 mm (*5,076.5) Cross (Z): 1,900 mm * Due to the two horizontal positions of the automatically indexing milling head, the vertical machining area can be extended by 576.5 mm. Table area (2 units): Length: 6,000 mm Width: 3,000 mm Number of T-slots on the table surface: 12 Width of T-slots: 22 mm Distance between slots: 250 mm FIBRO Rotary & Sliding Table: Dimensions: 3,000 x 3,000 mm Sliding axis: 1,500 mm Max. table load: 40 t Year of manufacture: 2002 Paint finish: RAL 7021 (black-grey) RAL 7035 (light grey) ref F-38 (DanobatGroup blue) Tool holder: ISO 50, DIN 69871 AD Big Plus Pull stud: DIN 69872 Form A Main drive: Drive type: SIEMENS main spindle motor with a 2-stage oil-cooled ZF gearbox Drive power: 100% duty cycle 53 kW (S1) Spindle speed range: Spindle speed: 20–4,000 min-1 Max. torque: at S1 – 100% duty cycle 1,531 Nm Max. feed force: X, Y, Z axis: 31,000 N Max. rapid traverse speed: X, Y, Z axis: 25,000 mm/min BASIC EQUIPMENT OF THE MACHINE: Heidenhain CNC control TNC640 High-performance orthogonal milling head Automatic tool changer (80 positions) Chip conveyor with floor discharge Coolant system with 20 bar & (IKZ) DYNAMICS ACTIVE STABILIZER+ "DAS+ SYSTEM" Cross-axis compensation Automatic milling head change system Operator platform Camera for workspace monitoring Pendulum machining package ACCURA HEADS Optimized Contour Milling (OCM) Laedpfx Ajyu Sznecfof RepairFIT is our proven solution for a profitable entry into our product lines. Machines available in this line are sourced through a rigorous selection process and undergo a comprehensive inspection (deep-dive check). After thorough cleaning, any obvious defects or faults found are professionally repaired by our expert service team.

Condition: used, Year of construction: 2018, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 3,200 mm, travel distance Z-axis: 1,500 mm, RepairFIT by Dornhöfer The Difference. Including Installation & Commissioning! Year of Manufacture: 2018 Capacities / Travels: Lajdpfoyu Swcex Acfjf Longitudinal (X): 6,000 mm Vertical (Y): 3,200 mm Cross (Z): 1,500 mm Table Size: Length: 6,000 mm Width: 2,500 mm T-slot width: 22H12 mm Distance between T-slots: 250 mm Paintwork: RAL 7021 (black grey) RAL 7035 (light grey) NCS S 3560 R80B (DanobatGroup blue) Tool holder: ISO 50, DIN 69871 AD Main Drive: Type: Water-cooled inline motor Motor Power: 100% duty cycle, 43 kW Speed Control: Infinitely variable via water-cooled inline motor with star/delta switching Spindle Speed Range: Spindle speed: 20-7,000 rpm Torque at 37 kW/S1: 900 Nm (1,045/S6) Max. feed force: X, Y, and Z axes: 20,000 N Max. rapid traverse speed: X, Y, and Z axes: 35,000 mm/min Weight: approx. 44,500 kg STANDARD EQUIPMENT: Heidenhain CNC control TNC640 Automatic milling head, diagonal (infinitely variable) Automatic tool changer (40 positions) Chip conveyor Coolant system with 20 bar & internal coolant supply (IKZ) NC rotary table preparation Confirmation for deep hole drilling RepairFIT is our proven solution for a profitable entry into our product lines. Machines available in this line are sourced through a rigorous selection process and subjected to a thorough inspection (deep-dive check). After intensive cleaning, any identified faults or defects are professionally repaired by our expert service team.

Condition: used, Year of construction: 2017, controller manufacturer: Heidenhain, controller model: TNC 640, _____ Description: Year of manuf. : 2017 Control : Heidenhain TNC 640 Speed : 5000 rpm Movement X/Y/Z : 4500/1800/1300 mm In General: Year of manufacture:2017 Control system:Heidenhain TNC 640 Travel range X/Y/Z:4,500/1,800/1,300 mm Spindle speed:5,000 rpm Tool holder:SK 50 Milling head (spindle): Technology:Diagonal head with gear spindle Index:0.001° Speed:5,000 rpm Tool holder:SK 50 Max. power:43 kW Max. torque:1,045 Nm Coolant supply:Coolant + blast air Laedpfxsy Eu Tvj Acfef Working table: Clamping surface:6,000 x 1,100 mm T-slots:6 x 22H12, spacing 140 mm Tool magazin: Technology:Chain magazine Number of stations:40 Tool changer:Double gripper (horizontal/vertical) Max. tool diameter:125 (250) mm Max. tool length:400 mm Equipment: Position measurement systems:Direct scales Chip removal:Chip conveyor Coolant supply:Internal coolant system with filter, 20 bar Workpiece measurement:Funk M&H probe Set-up operation:HR 510 electronic handwheel Software option:Adaptive Control

Condition: used, Year of construction: 2013, Technical details: x-travel: 30000 mm y-travel: 3600 mm z-travel: 1900 mm milling head speed: 1 - 4000 U/min spindle taper ISO: 50 feed speeds: 1 - 10000 mm/min rapid traverse: 25 m/min milling spindle motor: 46 kW total power requirement: 85 kW dimensions of the machine ca.: 45 x 8,7 x 5,5 ü.F. m Lsdpfjvmzihjx Acfoaf with CNC HEIDENHAIN iTNC 530 autom. milling head indexing 2,5° floor plate field 31000 x 2500 mm ( 4 floor plates 6000 x 2500 mm + 1 floor plate 7000 x 2500 mm ) 2 chip conveyors, coolant attachment *

Condition: used, Year of construction: 2013, x-travel 30000 mm y-travel 3600 mm z-travel 1900 mm Control Heidenhain type TNC 530 i turning speeds 4000 U/min conus taper DIN 69871+AD mm Feed 10000 mm/min Ljdpfsyqtnnex Acfeaf spindle drive 46 kW Rapid movement 25000 mm/min chip conveyor 2 St. Plate area 31000x2500 mm total power requirement 85 kW Soraluce No. 5619 Load hours 9332 On-time hours 27960 Panel array consists of: 1 panel 7000x2500 mm 4 panels 6000x2500 mm Optional: 4x clamping angles Tool package Clamping table The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2013, x-travel 9000 mm y-travel 3200 mm z-travel 1900 mm w-axis 700 mm V-axis 3000 mm control Siemens 840 D SL Table Drehverschiebetisch 2 Stück table load max. 20 t Tool changer 120 pos. tool taper SK 50 size of pallet 2200x1500 mm spindle power 46 kW Workpiece interferece circle diameter: 2500 mm Orthotic head power: 46 kW Aggregate (pick-up max. 6 positions): Quill diameter 130 mm Orthotic head 1x1 degree Horizontal milling attachment Ledpfeyr Skdox Acfsaf Henninger angle head The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2013, x-travel 6000 mm y-travel 4750 mm z-travel 1500 mm control Siemens 840 D SL Table Verschiebetisch table load max. 20 t Tool changer 120 pos. tool taper SK 50 size of pallet 2200x1500 mm spindle power 46 kW Aggregate (pick-up max. 5 positions): Ortho head 1x1 degree Short vertical milling attachment Heavy angle head Long angle head The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Lajdsyr Aq Uepfx Acfjf We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2013, x-travel 9000 mm y-travel 3200 mm z-travel 1900 mm w-axis 700 mm V-axis 3000 mm control Siemens 840 D SL Table Drehverschiebetisch 2 Stück table load max. 20 t Ledoyr Aqzspfx Acfeaf Tool changer 120 pos. tool taper SK 50 size of pallet 2200x1500 mm spindle power 46 kW Workpiece interferece circle diameter: 2500 mm Orthotic head power: 46 kW Aggregate (pick-up max. 6 positions): Quill diameter 130 mm Orthotic head 1x1 degree The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Year of construction: 2021, condition: ready for operation (used), - USED - TRAVELLING COLUMN MILLING MACHINE LONGITUDINAL TRAVEL: 4500 mm TRANSVERSAL TRAVEL: 1300 mm VERTICAL TRAVEL: 1800 mm RAPID FEEDS L-T-V: 35 m/min TABLE SIZE: 6000 x 1100 mm TABLE HEIGHT FROM FLOOR LEVEL: 850 mm SPINDLE: 20-4000 rpm; 37-43 kW; 900-1045 Nm; ISO 50 HEAD: MILLING AND BORING AXIAL HEAD Lasdsx Dfkgjpfx Acfof TOOL MAGAZINE: CHAIN-TYPE ; 60 POS CONTROL UNIT: HEIDENHAIN TNC 640 WEIGHT: 24800 Kg OVERALL DIMENSIONS: 6970 x 4310 x 4150 mm ACCESSORIES: SWARF CONVEYOR ; LINEAR SCALES ; TOUCH PROBE NOTE: OPERATOR'S PLATFORM

Condition: ready for operation (used), Year of construction: 1997, travel distance X-axis: 4,500 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,000 mm, rotational speed (max.): 3,000 rpm, CNC Heidenhain TNC 426 30-tool changer SA 50 spindle with automatic tool changer Maximum spindle speed: 3000 RPM Table size: 6000 x 1100 mm Travel: 4500 x 1200 x 1000 mm Ljdpozh U Hfjfx Acfsaf Chip conveyor 4th axis Tooling

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 4,260 h, load capacity: 2,500 kg, lifting height: 6,000 mm, free lift: 1,720 mm, load center: 600 mm, fuel type: gas, mast type: triplex, construction height: 2,600 mm, motor manufacturer: GM, gearing type: hydrostat, fork carriage width: 1,400 mm, fork length: 1,200 mm, fork width: 120 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 16 x 7 x 10 1/2, rear tire type: cushion tires (black), rear tire size: 22 x 10 x 16, overall weight: 8,800 kg, empty load weight: 6,300 kg, total height: 2,250 mm, total length: 1,550 mm, total width: 1,500 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, front guard, lighting, pallet forks, sideshift, COMBILIFT CB2500 – 2017 | 4,260 MTH | GAS | TRIPLEX 6,000 mm | SIDE SHIFT | FORK POSITIONER Ready for operation from day one – no capital outlay, no risk ⚙️ Why choose this forklift? 🚀 Are you looking for a machine that will keep your operations running smoothly? This COMBILIFT CB2500 is a proven unit, fully serviced and ready to work right away, with no hidden fees. ✔ Fully serviced (oils, filters, comprehensive inspection of all components) ✔ Technical and visual condition: like new ✔ Only 4,260 operating hours – genuinely well-maintained ✔ New tyres – no extra investment required Key specifications 📊 Capacity: 2,500 kg Power: GAS ⛽ Mast: Triplex – 6,000 mm Fork positioner: 1,400 mm Fork length: 1,200 mm Cab: Open (overhead guard and front protection) Full technical specification 🔧 General data: Year of manufacture: 2017 Operating hours: 4,260 MTH Rated capacity: 2,500 kg Load centre: 600 mm Truck weight: 6,300 kg Mast and lifting: Mast type: Triplex Lift height: 6,000 mm Forks and attachments: Fork positioner: 1,400 mm Fork length: 1,200 mm Dimensions: Height: 2,250 mm Length: 1,550 mm Width: 1,500 mm Overall height: 2,250 mm Chassis: Tyres: superelastic (100%) – brand new Front: 16 x 7 x 10 1/2 Rear: 22 x 10 x 16 Equipment: Open cabin Fork positioner Side shift Free lift Condition: Technical: 5/5 – fully serviced Aesthetic: refurbished, like new, no corrosion Ideal for: 🏭 ✔ Narrow aisle warehouses ✔ Timber, steel and pipe handling ✔ Efficient long load handling ✔ Indoor and outdoor use What you’re buying 💡 You’re not buying a typical “used forklift”. You’re purchasing a fully prepared and tested machine: ✔ Each unit goes through a thorough test prior to sale ✔ Ready for immediate deployment ✔ Live online demonstration available 🎥 ✔ Direct delivery to your location 🚛 Delivery and service 🌍 • Transport throughout Europe • Comprehensive logistics support • Assistance with leasing/financing • Dedicated after-sales support Why FT LOGISTICS? 🤝 We don’t just deliver forklifts – we deliver solutions that keep you working. ✔ Over 100 units in stock Lodpfxjzvl Nte Acfoaf ✔ In-house servicing and preparation ✔ Proven track record across Europe ✔ Hundreds of satisfied customers Contact us today 📞 FT LOGISTICS – Quality you can count on. Service you can trust.

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 4,260 h, load capacity: 2,500 kg, lifting height: 6,000 mm, free lift: 1,720 mm, load center: 600 mm, fuel type: gas, mast type: triplex, construction height: 2,600 mm, motor manufacturer: GM, gearing type: hydrostat, fork carriage width: 1,400 mm, fork length: 1,200 mm, fork width: 120 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 16 x 7 x 10 1/2, rear tire type: cushion tires (black), rear tire size: 22 x 10 x 16, overall weight: 8,800 kg, empty load weight: 6,300 kg, total height: 2,250 mm, total length: 1,550 mm, total width: 1,500 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, front guard, lighting, pallet forks, sideshift, COMBILIFT CB2500 – 2017 | 4,260 MTH | GAS | TRIPLEX 6,000 mm | SIDE SHIFT | FORK POSITIONER Lajdpfezufmpsx Acfsf Ready for operation from day one – no capital outlay, no risk ⚙️ Why choose this forklift? 🚀 Are you looking for a machine that will keep your operations running smoothly? This COMBILIFT CB2500 is a proven unit, fully serviced and ready to work right away, with no hidden fees. ✔ Fully serviced (oils, filters, comprehensive inspection of all components) ✔ Technical and visual condition: like new ✔ Only 4,260 operating hours – genuinely well-maintained ✔ New tyres – no extra investment required Key specifications 📊 Capacity: 2,500 kg Power: GAS ⛽ Mast: Triplex – 6,000 mm Fork positioner: 1,400 mm Fork length: 1,200 mm Cab: Open (overhead guard and front protection) Full technical specification 🔧 General data: Year of manufacture: 2017 Operating hours: 4,260 MTH Rated capacity: 2,500 kg Load centre: 600 mm Truck weight: 6,300 kg Mast and lifting: Mast type: Triplex Lift height: 6,000 mm Forks and attachments: Fork positioner: 1,400 mm Fork length: 1,200 mm Dimensions: Height: 2,250 mm Length: 1,550 mm Width: 1,500 mm Overall height: 2,250 mm Chassis: Tyres: superelastic (100%) – brand new Front: 16 x 7 x 10 1/2 Rear: 22 x 10 x 16 Equipment: Open cabin Fork positioner Side shift Free lift Condition: Technical: 5/5 – fully serviced Aesthetic: refurbished, like new, no corrosion Ideal for: 🏭 ✔ Narrow aisle warehouses ✔ Timber, steel and pipe handling ✔ Efficient long load handling ✔ Indoor and outdoor use What you’re buying 💡 You’re not buying a typical “used forklift”. You’re purchasing a fully prepared and tested machine: ✔ Each unit goes through a thorough test prior to sale ✔ Ready for immediate deployment ✔ Live online demonstration available 🎥 ✔ Direct delivery to your location 🚛 Delivery and service 🌍 • Transport throughout Europe • Comprehensive logistics support • Assistance with leasing/financing • Dedicated after-sales support Why FT LOGISTICS? 🤝 We don’t just deliver forklifts – we deliver solutions that keep you working. ✔ Over 100 units in stock ✔ In-house servicing and preparation ✔ Proven track record across Europe ✔ Hundreds of satisfied customers Contact us today 📞 FT LOGISTICS – Quality you can count on. Service you can trust.

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 4,260 h, load capacity: 2,500 kg, lifting height: 6,000 mm, free lift: 1,720 mm, load center: 600 mm, fuel type: gas, mast type: triplex, construction height: 2,600 mm, motor manufacturer: GM, gearing type: hydrostat, fork carriage width: 1,400 mm, fork length: 1,200 mm, fork width: 120 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 16 x 7 x 10 1/2, rear tire type: cushion tires (black), rear tire size: 22 x 10 x 16, overall weight: 8,800 kg, empty load weight: 6,300 kg, total height: 2,250 mm, total length: 1,550 mm, total width: 1,500 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, front guard, lighting, pallet forks, sideshift, COMBILIFT CB2500 – 2017 | 4,260 MTH | GAS | TRIPLEX 6,000 mm | SIDE SHIFT | FORK POSITIONER Ready for operation from day one – no capital outlay, no risk ⚙️ Why choose this forklift? 🚀 Are you looking for a machine that will keep your operations running smoothly? This COMBILIFT CB2500 is a proven unit, fully serviced and ready to work right away, with no hidden fees. ✔ Fully serviced (oils, filters, comprehensive inspection of all components) ✔ Technical and visual condition: like new ✔ Only 4,260 operating hours – genuinely well-maintained ✔ New tyres – no extra investment required Key specifications 📊 Capacity: 2,500 kg Power: GAS ⛽ Mast: Triplex – 6,000 mm Fork positioner: 1,400 mm Fork length: 1,200 mm Cab: Open (overhead guard and front protection) Full technical specification 🔧 General data: Ljdpfx Aszq R Spscfeaf Year of manufacture: 2017 Operating hours: 4,260 MTH Rated capacity: 2,500 kg Load centre: 600 mm Truck weight: 6,300 kg Mast and lifting: Mast type: Triplex Lift height: 6,000 mm Forks and attachments: Fork positioner: 1,400 mm Fork length: 1,200 mm Dimensions: Height: 2,250 mm Length: 1,550 mm Width: 1,500 mm Overall height: 2,250 mm Chassis: Tyres: superelastic (100%) – brand new Front: 16 x 7 x 10 1/2 Rear: 22 x 10 x 16 Equipment: Open cabin Fork positioner Side shift Free lift Condition: Technical: 5/5 – fully serviced Aesthetic: refurbished, like new, no corrosion Ideal for: 🏭 ✔ Narrow aisle warehouses ✔ Timber, steel and pipe handling ✔ Efficient long load handling ✔ Indoor and outdoor use What you’re buying 💡 You’re not buying a typical “used forklift”. You’re purchasing a fully prepared and tested machine: ✔ Each unit goes through a thorough test prior to sale ✔ Ready for immediate deployment ✔ Live online demonstration available 🎥 ✔ Direct delivery to your location 🚛 Delivery and service 🌍 • Transport throughout Europe • Comprehensive logistics support • Assistance with leasing/financing • Dedicated after-sales support Why FT LOGISTICS? 🤝 We don’t just deliver forklifts – we deliver solutions that keep you working. ✔ Over 100 units in stock ✔ In-house servicing and preparation ✔ Proven track record across Europe ✔ Hundreds of satisfied customers Contact us today 📞 FT LOGISTICS – Quality you can count on. Service you can trust.

Condition: new, travel distance X-axis: 6,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 20,000 m/min, table load: 1,000 kg, with multi-angle head for efficient and productive 5-sided machining of long parts, such as beams, profiles, tubes, etc. • Max. travel distances: X-axis: 6000 mm working range Y-axis: 800 mm working range Z-axis: 600 mm • Max. load capacity: 1500 kg • Main spindle drive power: 11 kW asynchronous motor • Main spindle speed: 8000 rpm • Tool holder: SK 40 • Rapid traverse rate X-axis: approx. 30000 mm/min • Rapid traverse rate Y-axis: approx. 20000 mm/min • Drilling capacity: ø 36 mm in S355 • Thread cutting: M20 in S355 • Servomotors for separate drive of the Y and Z axes with ball screw; X-axis with helical and hardened rack and pinion drive • Limit and reference switches in non-contact design • Spindle overload protection • Robust, precise cross table, generously sized • Safety device combined with light curtain and/or safety fence • Tool diameter: max. 100 mm • Tool length: max. 270 mm • Approximate footprint (L x W x H): 9050 x 3600 x 3150 mm • Total weight: approx. 8 tons Lsdpoznlkzsfx Acfoaf • Customer-side connections: Connection power: 30 kW / 63 A • Compressed air: 6 – 8 bar • Control system: Heidenhain TNC7 Basic • Main computer: MC 355 with 19" FullHD multi-touch screen • Mobile machine control panel with keyboard TE 350 - Tool changer, 24-position - Minimum quantity lubrication and/or coolant system - Chip conveyor including discharge chute Heidenhain options, such as: - Heidenhain electronic handwheel - Heidenhain 3D probing system for workpiece measurement - Heidenhain CAD import software option - Heidenhain tool length measuring system - 6 pcs. Mechanical-hydraulic vises MSH 150, clamping width 300 mm - Pendulum operation duo (divided working area) - Multi-angle head (moving, automatically interchangeable, controlled rotary axis 360°, lockable every 15°, automatic tool changer, 10-position, angle head length approx. 215 mm, usable length approx. 160 mm, machine-side mounting: SK 40 with 4-point clamping system, hydraulic, tool-side design: BENZ HSK 50 or comparable, translation 1:1, max. speed 3000 rpm, cycle operation, max. torque: 100 Nm, lubrication: grease/continuous, weight approx. 50 kg, minimum quantity lubrication with 1-2 nozzles.

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 4,260 h, load capacity: 2,500 kg, lifting height: 6,000 mm, free lift: 1,720 mm, load center: 600 mm, fuel type: gas, mast type: triplex, construction height: 2,600 mm, motor manufacturer: GM, gearing type: hydrostat, fork carriage width: 1,400 mm, fork length: 1,200 mm, fork width: 120 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 16 x 7 x 10 1/2, rear tire type: cushion tires (black), rear tire size: 22 x 10 x 16, overall weight: 8,800 kg, empty load weight: 6,300 kg, total height: 2,250 mm, total length: 1,550 mm, total width: 1,500 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, front guard, lighting, pallet forks, sideshift, COMBILIFT CB2500 – 2017 | 4,260 MTH | GAS | TRIPLEX 6,000 mm | SIDE SHIFT | FORK POSITIONER Ready for operation from day one – no capital outlay, no risk ⚙️ Why choose this forklift? 🚀 Are you looking for a machine that will keep your operations running smoothly? This COMBILIFT CB2500 is a proven unit, fully serviced and ready to work right away, with no hidden fees. ✔ Fully serviced (oils, filters, comprehensive inspection of all components) ✔ Technical and visual condition: like new ✔ Only 4,260 operating hours – genuinely well-maintained ✔ New tyres – no extra investment required Key specifications 📊 Capacity: 2,500 kg Power: GAS ⛽ Mast: Triplex – 6,000 mm Fork positioner: 1,400 mm Fork length: 1,200 mm Cab: Open (overhead guard and front protection) Full technical specification 🔧 General data: Year of manufacture: 2017 Operating hours: 4,260 MTH Rated capacity: 2,500 kg Load centre: 600 mm Truck weight: 6,300 kg Mast and lifting: Mast type: Triplex Lift height: 6,000 mm Forks and attachments: Fork positioner: 1,400 mm Fork length: 1,200 mm Dimensions: Height: 2,250 mm Length: 1,550 mm Width: 1,500 mm Overall height: 2,250 mm Chassis: Tyres: superelastic (100%) – brand new Front: 16 x 7 x 10 1/2 Rear: 22 x 10 x 16 Equipment: Open cabin Fork positioner Side shift Free lift Condition: Technical: 5/5 – fully serviced Aesthetic: refurbished, like new, no corrosion Ideal for: 🏭 ✔ Narrow aisle warehouses ✔ Timber, steel and pipe handling ✔ Efficient long load handling ✔ Indoor and outdoor use What you’re buying 💡 You’re not buying a typical “used forklift”. You’re purchasing a fully prepared and tested machine: ✔ Each unit goes through a thorough test prior to sale ✔ Ready for immediate deployment ✔ Live online demonstration available 🎥 ✔ Direct delivery to your location 🚛 Delivery and service 🌍 • Transport throughout Europe • Comprehensive logistics support • Assistance with leasing/financing • Dedicated after-sales support Why FT LOGISTICS? 🤝 We don’t just deliver forklifts – we deliver solutions that keep you working. ✔ Over 100 units in stock ✔ In-house servicing and preparation ✔ Proven track record across Europe Lajdezpaqropfx Acfef ✔ Hundreds of satisfied customers Contact us today 📞 FT LOGISTICS – Quality you can count on. Service you can trust.

Year of construction: 2023, condition: like new (used), functionality: fully functional, We offer this as new FoodMAC International Ltd BULLDOG 6000/600 Electric Fryer for frying cut potatoes and similar products, year of construction 2023. Model: FRE 6000/600 Voltage: 400 V Power: 200 kW Year of manufacture: 2023 Weight: 1980 kg Machine number: 3035 Capacity: 1500 kg/h Lsdpfx Aezgt D Hocfoaf If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), REFU 317/03-AB01 frequency converter SN: 6000-1697-0006 - 3AC 0-4000V / 50/60Hz, used, good condition, 100% functional, scope of delivery as per photos Lsdpfx Aotvcucjcfsaf

Condition: good (used), Year of construction: 2002, functionality: fully functional, USED Soraluce Soramill Model SP 10000 Travelling Column, Table Type CNC Milling Centre, with Automatic Oil Mist Lubricated Orthogonal Milling Head with 1 X 1 Degree Indexing and HEIDENHAIN TNC 430 M Control System. Year 2002 SN 8647 Table Area - 10000 x 1100 mm Column Traverse (X) - 8500 mm Vertical Traverse (Y) - 1600 mm Ram Traverse (Z) - 1200 mm Spindle Motor - 28 kW Spindle Taper - Standard ISO 50 BT50 tooling Pullstud - DIN 6987 2-Form A. ISO 7388/2-Form A Independent Gearbox with 2 Ranges Speed Range - 20 to 4000 RPM Feed Range - 5 to 5000 mm/min Rapid traverse rate - (X, Y, Z) 15,000 mm/min Preloaded double nuts and recirculating ballscrews to each axis. Linear Guiding System with recirculating cylindrical rollers and steel guideway assemblies in X, Y and Z axes Independent A.C Drive motor to each axis. Lajdpfxor Hr Ars Acfsf Linear Transducer in X, Y and Z-axes with air purge system. Automatic tool clamping. Automatic hydraulic tool releasing device. CNC Control HEIDENHAIN TNC-430-M. (Flat TFT screen with digital drives) 9 axes CNC and 1 spindle, 5 of them simultaneously interpolated. Working area lighting Electrical cabinet cooling system Electrical cabinet lighting Heidenhain HR410 portable electronic handwheel with 3m spiral cable Horizontally articulated pendant for CNC control Orthogonal head 28KW, 800Nm, 1deg x 1 deg, 4000rpm oil lubricated Price includes oil cooling unit for both head and gearbox. Option G2, Ram prepared for 4000rpm, is also included. Coolant through the spindle type AD. Coolant system with 500l capacity tank with two pumps providing low and high pressure of 3 and 8 bars and 50l/min flow. The system includes a combined paper and magnetic drum-filtering unit. Standard operators platform fixed to the column 40 tools capacity toolchanger magazine, BT50 Max. Tool length = 400 mm. Max. Tool diameter: - With full magazine = 120 mm. With adjacent position empty = 250 mm. Max. Tool weight = 20 kg. Mean tool weight with full magazine = 10 kg. Max. Permitted total weight = 20 kg. Swarf Conveyor Hinge type conveyor belt Machine preparation for the addition of a 4th axis electro-mechanical table. Splash Guarding against swarf at the table front and both sides. Consists of four sliding front doors with a height from the floor of 2.100mm and a length of 1.700mm each one. Manually operated opening and closing with mechanical interlock. The doors can be opened for the full longitudinal traverse. The rear of the table is open. Protection in the back and both lateral sides of the machine column.

Condition: ready for operation (used), Year of construction: 2000, spindle speed (max.): 3,000 rpm, travel distance X-axis: 6,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 2,000 mm, controller manufacturer: HEIDENHAIN, controller model: 426, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Soraluce SP 8000 was manufactured in 2000. It features an impressive X-axis travel of 6,500 mm, Y-axis travel of 1,250 mm, and Z-axis travel of 2,000 mm. The machine is equipped with a high-torque spindle motor and a tool magazine capacity of 30 tools. If you are looking to get high-quality machining capabilities, consider the Soraluce SP 8000 universal machining centre we have for sale. Contact us for further details. • Max. feed rate: 15,000 mm/min • Guideways: Heavy-duty linear/roller guideways with linear scales • Milling head: Automatic Huré-type universal head, 2.5° x 2.5° automatic indexing on both bodies Ljdpfszumgkox Acfeaf • Spindle: taper ISO 50 / SK 50 (DIN 69871); direct/gearbox-driven high-torque motor • Tool changer and magazine: ATC with 30-tool chain-type, column-mounted; supports heavy-duty tooling (weight/length per standard) • CNC control: Heidenhain iTNC 530 / TNC 640 or Siemens Sinumerik Additional equipment • Chip conveyor (longitudinal, between table and column) • Coolant system (external supply to tool/head) • Enclosure (partial/perimeter protection) Technical Specification Taper Size ISO 50

Year of construction: 1995, condition: ready for operation (used), A CNC rigid board milling and drilling center Bimatec Soraluce is available. Travel X/Y/Z: 2500mm/900mm/1600mm, speed: 2000rpm, spindle mount: ISO40/M16, tool positions: 30, transport dimensions X/Y/Z: approx. 5300mm/3450mm/3500mm, weight: approx. 13500kg, control: Heidenhain CNC 415, operating hours: 31507h. Including fixed table, movable stand, automatically indexing milling head, manual measuring probe, coolant device and filter system. Documentation available. On-site inspection is possible. Lsdpfxsu T Rgwj Acfoaf