Used Spadoni / Kieselgurfilter for sale (6)

Condition: used, Year of construction: 2013, Overview  This diatomaceous earth filter was manufactured in 2013 by Spadoni (Italy) and later adapted by (Spain). The mobile filtration unit is equipped with an integrated pumping and control system for fine filtration with diatomaceous earth. It is on sale because the owner upgraded to a newer model. The filter is in good condition and available immediately. Technical data Lhjdpfx Ajxfcc Aomtji - Capacity: Approx. 80 hL/h - Filtration system: Diatomaceous earth - Tank: Pressurized stainless steel - Pump 1: OBL MHBN100PP, 100 l/h capacity, 10 bar max pressure - Pump 2: EBARA 2CDX/E 120/30, stainless steel liquid transfer pump - Valve system: Stainless steel, precise flow control - Design: Mobile filtration unit with integrated control system

Condition: used, Year of construction: 2019, Overview  This isobaric maturation tank was manufactured in 2019 by Spadoni. It is designed for the isobaric and isothermal maturation of beverages under pressure, with a working capacity of 1,200L (12 hL) and a total volume of 1,300L (13 hL). The tank is certified up to 3 bar (PED) and equipped with high-quality fittings and insulation. Further information on request. Technical data  - Capacity: - Working: 1,200 L / 12 hL - Total volume: 1,300 L / 13 hL Lhjdpfowkfwpox Amtji - Pressure: - Working pressure: 2 bar - Shell: 0.49 bar - Factory hydraulic test: 2 bar - Certified (PED): 3 bar - Material: AISI 304 stainless steel - Insulation: 80 mm polyurethane foam on cylinder and bottom head, stainless steel covered - Finish: - Interior: 2B with polished welds - Exterior: brushed grain 120 with polished welds - Heads: Klopper type (top and bottom) - Cooling: Cooling jacket on the cylinder - Manway: Isobaric Ø400 mm, pressure-resistant up to 4 bar - Connections & fittings: - 2 lifting lugs - Ladder support - CIP tube with top spray ball and 2x butterfly valves NW40 - Drain valve NW40 with cap and chain - Bottom discharge valve NW40 with cap and chain - Sight glass level tube (rigid acrylic, graduated in liters) - Probe port (PT-100 sensor) - Sampling valve - Safety valve (calibrated at 3 bar) - Mounting: Adjustable feet  

Condition: used, Year of construction: 2014, Overview This complete brewing equipment is mainly from 2014 and is becoming available because the company is closed. The equipment is already dismantled and stored properly. Scope  - Water Softener - Compressor | Josval Sauber 240 D - Mill | Robix ROPPI 250 - Thermindus Boiler Ps(Barg 6) PL (Barg 10.4) Ts Max 165, Ts min 10, kW 34 - Portable Pump 2.20kw INOX - Hoses, cones, keys - Manual Isobaric Bottling Machine 4 spouts - Automatic Labeler | Arca L10-8128 - 2x Rotating Table with Regulator 100cm Diameter, for input and output of bottles or cans - Videojet 1220 Batch Coder - Infrico Undercounter Refrigerator with 3 Doors - Brewhouse | Spadoni | MBS 600 VAP | 2014 - Spadoni 600, Masher 680 Liters, Bottom Filter, Rotating Blades, Transfer and Recirculation Pump Boiler 720lt with Whirlpool, with Boiler Pump and Spadoni Plate Cooler - Hot Water Tank | Spadoni | 10hl - Cold Water Tank | Spadoni | 10hl - Mixing Tanks | Spadoni | 1.5hl with Tangential Entries - Mixing Tanks | 1.5hl with Tangential Entries - 2x Isobaric Fermenters | Spadoni | 2.5 bar 15hl Lhjdpetka Aqofx Amtji - 2x Isobaric Fermenters | Spadoni | 2.5 bar 30hl - 2x Atmospheric Fermenters 1bar Pressure 1.2hl | BREW TECH - Atmospheric Fermenters 1bar Pressure 1.2hl, (Jacketed) | BREW TECH

Condition: used, Filter area: 3 m2 Installed power: 2,45 kW Horizontal disk filter with manual discharge system This filter uses the horizontal disc system, the only type able to ensure the panel is undamaged even by accidental interruptions in filtration. There is no risk to the panel even in the event of incorrect operation or power cuts. The liquid in the vessel, batching unit and pipes is filtered perfectly at the end of work using a special disc for the purpose. The special filter unit used means that cleaning can be carried out simply using a jet of water and the sped al chute supplied. Manufactured in stainless steel throughout, including the feed pump, pipes, valves and caster-mounted frame. Lodsxyt A Nepfx Amtjhi Complete kieselgur batching system with vanable delivery piston pump and stainless steel tank with built-in electric mixer. Electric panel complete with every control and safety device required for safe, dependable operation.

Condition: used, filtration surface (sqm): 20 Lhsdpfx Amoxytu Estji discharge of vessel: automatic discharge operating pressure (bar): 12 electrical power supply kW: 27 weight [kg.]: 1.5 volume of vessel (ltr): 1040

Condition: used, Year of construction: 2014, Overview  This complete glass bottling line was manufactured between 2010 and 2014 by several reputable European manufacturers, including CIMEC (Italy). The main monobloc — a CIMEC 16-16-1 rinsing, filling and crowning unit — was built in 2014 and operated at a natural mineral water facility until July 2025. The line also includes auxiliary equipment such as self-adhesive and wrap-around labellers, a DE filter, and a heat-shrink capsule tunnel, making it a fully functional and compact filling line for glass bottles with crown caps. All equipment remains installed, is in good condition, and can be inspected on site. Technical data  - Year of Manufacture: 2010–2014 Ledpfx Ameyb Tkdstehi - Application: Water and other beverages - Capacity: - Approx. 2,000 bph (330 ml) - Approx. 1,670 bph (500 ml) - Bottle Formats: 250 ml – 1,000 ml (included: 330 ml & 500 ml) - Closure Type: 26 mm crown caps - Configuration (Monobloc): - 16 rinsing heads - 16 filling heads - 1 crowning head Scope of Delivery  - Rinser / Filler / Crowner Monoblock | CIMEC | Monobloc 16-16-1 | 2014 | 16/16/1 configuration, 26 mm crown caps, 2,000 bph - Self-adhesive labeler | Canellitech | V500 | 2012 | Linear, up to 3. 500 bph - Single-head labeler (wrap-around) | Identapply | Servo 125 RH | 2010 | With conveyor belts - DE filter | Spadoni | - | 2011 | 80 hl/h - Shrink tunnel | TOSA | TN1 | 2011 | For PVC capsules