Used Standing Sheet Delivery Prestige Net 52 for sale (39,328)

Condition: new, Year of construction: 2025, Double standing seam roofing machine F3 is used for making double standing seam lock for the roofing panels that are used for installation of the double standing seam roofing. The double standing seam roofing is widely used because it’s impossible for the water to get under the closed double standing roofing panels in the places of their contact with each other, thanks to lock’s special shape. The special shape means that double standing seam panels cover each other in the places of their contact, and after their installation on the roof it will be closed using special double standing seam closing tools (manual tool for closing double standing seam lock and electric machine for closing double standing seam lock). The advantage of this Standing seam machine is possibility to change the width of the standing seam roofing panels in very simple way. There’s a special screw at the one side of this standing seam machine and turning it around the operator can change the width of the panels. So the adjustment of the standing seam roofing machine doesn’t take a lot of time for the operator and let him use his working time more effectively. This double standing seam roofing machine is good for making double standing seam panels from different kinds of metals (galvanized steel, steel coated with copper, zinc, titanium, etc.) This standing seam roofing machine has six pairs of rolls which form the shape of the double standing seam roofing panels. Fodshz Twwepfx Akhjgf This machine could be produced for using with 220V or 380V electric lines. You can also purchase with roofing seam machine: additional pair of rolls for making ribs on the roofing panels; additional pair of rolls for making bended panels with a big radius of bending; cutting knife; metal decoiler; manual tool for closing seam lock; electric machine for closing seam lock; sheet metal cut to length machine; It’s easy to work with our double standing seam roofing machine right on the place of the double standing seam roof installation, thanks to the small weight and not huge sizes of this standing seam machine. It’s let the owner of this roofing machine to save money not spending them on renting additional places for making double standing seam roofing panels, storage them and transport to the place of their installation. Our enterprise has started producing of this double standing seam roofing machine since 2005 so we have great experience in doing our job and can propose you a great solution for your business. To get more information about the price of this double standing seam roofing machine and the way it could be delivered to your location just contact us. We will give you all the information you need.

Condition: new, Year of construction: 2018, functionality: fully functional, cooling capacity: 52 kW (70.70 HP), type of input current: three-phase, type of cooling: air, overall weight: 740 kg, input voltage: 400 V, total width: 1,200 mm, total length: 1,800 mm, total height: 1,900 mm, warranty duration: 12 months, Aircooled chiller Climaveneta NX K 0202P 52 kW Cooling capacity: 52 kW / 14.79 tons (12/7 — 35°C) Year of manufacture: 2018 Options: Hydraulic module Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Microchannel, Aluminum Compressors: 2 pcs. Copeland ZP112KCE-TFD-455 (scroll) Type of refrigerant: R410a Number of fans: 4 pcs. (Frequency inverter) Hydraulic module: 1 pcs. water pump EBARA DWC-V 300/1, expansion vessel, buffer tank 90 l. Dimensions: 1.8x1.2x1.9 m. Weight: 740 kg. Working hours: 49/49 h. Condition: Outlet CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. Dot Eboxwmwustm Noup After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Fgedpfx Akjy I Tndohef LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Year of construction: 2010, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 101258050, Submission of a bid constitutes an obligation for timely collection no later than 31/12/2025! The offer includes: Bacciottini Pit Stop WFD2H Speed (Serial number: WFD2H 1010, Year of manufacture: 2010) MB PFNET 52/4-40-ART52 (Serial number: 101258050) TECHNICAL DETAILS Number of pockets: 4 EQUIPMENT 2-bar scoring system Inline Fedpfxexyh E Sj Akhegf Extended feeder MB folding machine Gatefold pocket Delivery

Condition: used, Sheet metal cabinet with hinged door, LID Original lid for the accessory cabinet Lid for FP1 / FP2 / FP3 with 2 sliding shelves without contents Length: 1000 mm Fgsdpfjznn Hxsx Akhof Width: 750 mm Height: 960 mm

Condition: excellent (used), - Model: SS064 - Serial number: 4900 - Lowering: manual or semi-automatic control - Belt width: 600 mm Fodpfx Akjwxwmfjhogf - Belt length: 1200 mm - 2 foldable belts - Forward / reverse control - Emergency stop - Mobile on wheels - Voltage: 400V

Condition: excellent (used), - Brand: SEEWER RONDO - Model: Motostar 3000 SFM859H - Serial number: B8161306 - Dimensions: 5900x1400x1600 mm - Roller diameter: 146 mm - Roller length: 850 mm - Roller opening: 0.5 – 65 mm - Roller speed: variable, 50–100 m/min. - Roller reduction: motorized, 30 automatic programs - Feed belt speed: 50 to 100% of roller speed - Discharge belt speed: 90 to 100% of roller speed - Guard opening: max. 125 mm - Material: stainless steel - Electric control system - Direction of rotation control - Automatic winder - Year of manufacture: 1998 - Made in Switzerland - Overhauled equipment: the equipment is prepared upon order; pick-up and return times are agreed at that moment (please request the price after overhaul) Fgjdpfxowxwl Is Akhjf

Condition: excellent (used), - Serial number: A3075005 - Manual or semi-automatic lowering - Belt width 600 mm - Belt length 1200 mm - 2 folding belts - Forward / reverse control Fedpfjwxwmlex Akhegf - Emergency stop - On mobile wheels - Voltage: 400V

Condition: like new (used), Year of construction: 2024, overall weight: 140 kg, total length: 1,200 mm, total height: 2,000 mm, total width: 600 mm, Control cabinet, switchgear cabinet, expansion cabinet, server cabinet, system cabinet, expansion system. Brand: Rittal Model: VX25 / VX Y352.222 Rittal two-door cabinet with integrated lighting cabinet dimensions: 1200 x 600 x h-2000 weight - 140 kg Cabinet is like new / never used. Fsdpfxozfhh Rj Akhegf

Condition: like new (used), Year of construction: 2023, overall weight: 100 kg, total length: 1,200 mm, total height: 1,800 mm, total width: 600 mm, Control cabinet, switchgear panel, expansion control cabinet, server cabinet, system cabinet, expansion system. Brand: Rittal Model: VX25 / VX 8286.000 Fgjdpfx Akezfhggohjf Two-door cabinet Cabinet dimensions: 1200 x 600 x H-1800 Weight: 100 kg Cabinet is like new / never used.

Condition: used, Tall metal cabinet Width: 1150 mm Fodpoza Edyofx Akhogf Depth: 520 mm Height: 1750 mm Weight: 90 kg Includes 3 shelves, doors lockable.

Condition: used, This listing is for the Envair Technology B102 Microbiological Safety Cabinet + Mobile Stand The unit is in full working condition and is ready for immediate use Overview: Envair Technology Bio 2 Essential (B102 Series) Certifications & Intended Use Fully compliant with BS EN 12469:2000, ensuring reliable biosafety standards. Envair Technology Suitable for handling biological agents up to ACDP Hazard Group 3, provided proper laboratory siting. Ideal for cell culture and related work. Envair Technology Design & Construction Width: 1200 mm. External body: Constructed from white polyester-coated mild steel. Work zone: Lined in 304-grade stainless steel with side-glazed panels. Work surface: Removable and dished, crafted from 316-grade stainless steel. Fgedpfexhfpksx Akhef Envair Technology Airflow & Filtration Offers recirculating or ducted configurations. Equipped with downflow HEPA filtration (Class H-14, ≥ 99.995% efficiency) according to EN 1822‑1 standards. Lighting & Fans Illuminated using low-energy LED lighting mounted external to the work area. Ventilation is powered by independent EC-type energy-efficient fans, both above and below the working zone. Envair Technology Control Interface Features an integrated positive-touch membrane control panel positioned above the work area, with animated display feedback. Envair Technology Compliance & Standards In addition to BS EN 12469:2000 and HEPA filter standards, the Bio 2 Essential cabinets also meet: IEC 61010‑1:2010 Air quality standards: ISO Class 5 (BS EN ISO 14644‑1:2015) and EU GMP Grade A.

Condition: used, Year of construction: 2017, machine/vehicle number: STA00197, XYZ CT52 2 Axis CNC Lathe Box Ways Slides Siemens 828D CNC Control Swing over bed 400mm Max’ machining dia. 200 mm X-axis stroke 115mm Z-axis stroke 290mm Spindle speed 5000 rev /min Spindle Bore 61mm Max’ bar work dia. 52mm 12 Station VD130 Turret Tailstock stroke 90 mm Rapid traverse rate 20 m/min X & Z Axis Cutting Feed rate 10 m/min X & Z Axis Machine Weight 2500Kgs Machine Size 1700 x 1240mm Manufactured 2017 Machine supplied with: 3 Jaw Chuck Power Chuck Tool Setting Probe Parts Catcher Chip Conveyor Auto Lubrication High Intensity Machine Light Toolbox Fgjdpfxezkbire Akhof For Sale With Jet Machinery Ltd Jet Machinery Stock Number:79248 Machine Serial Number: STA00197 £29,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2019, HD-SFVO 412-S HBE 320/523 G- YEAR 2019. Marking-drilling-milling-shearing & sawing line HD-SFVO 412-S DRILLING CAPACITY. Flat bars: 50x10 to 400x30 Angles: 50x50x5 to 250x250x20 IPN-IPE: 80 to 400 HEA-HEB: 100 to 400 UPN-UPE: 80 to 400 Square and rectangular tubes: 50x50 to 300x300x20 HBE 320/523 G SAWING MACHINE. Effective cross-section (mm): 90°: 400x300 Bevel cut, left pivot (W x H, mm): 75°: 400x300 60°: 400x300 45°: 330x300 30°: 200x300 Bevel cut, right pivot (W x H, mm): 75°: 400x300 60°: 400x300 45°: 310x300 Power supply: • Three-phase 400V ± 15 V + ground, 50Hz • Installed power: 40 kVA Compressed air: • Minimum pressure: 6 bar • Maximum flow rate: 3 Nm³/h Operating temperatures: • From 10°C to 40°C Milling unit specially designed for machining small square or rectangular tubes (slotted holes, shaped cuts, etc.). With the engraving equipment: ability to engrave letters or numbers for part identification. Allows, among other things, marking of tubes with sufficient depth to ensure legibility after painting or galvanizing Secure holding of the bar during milling: the bar is clamped in the movable vice system to ensure proper machining while minimizing vibrations. Improved positional tolerance of one hole relative to another within a group of holes (within a maximum length of 150 mm) Additional features Cycle for centre punching, countersinking, tapping, deburring, and chip breaking Automatic measurement of tool length (HSS) Side and centre tool cooling 230-ton shear Feature Mobile hydraulic shear Straight cut Average cutting time: approximately 2 to 2.5 seconds Capacities: HEB 140 IPE 300 IPN 280 Angle bars 150x150x18 L 200x100x14 UPE 300 UPN/UPAF 300 Flat bars 300x20 Fgodpfoy R Tk Rsx Akhef

Year of construction: 2019, condition: excellent (used), Plate magnet, lifting magnet, overbelt magnet, police magnet, magnetic filter, magnetic separator Overband plate magnet Execution in VA 1.4301 tightly welded NEODYMIUM MAGNETIC CORE, very adhesive! Dimensions: 620x520x200mm 4 - piece M16 eyebolts on the back This lifting magnet was used by one of our customers as a "police magnet" in the meat processing industry. The price mentioned refers to 1 piece. Currently only 1 piece available from stock! All information without guarantee, only while stocks last! Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator Our core competence lies in supplying the customer with exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Overband plate magnet Execution in VA 1.4301 tightly welded 420x420x200mm 420x420x250mm 620x420x200mm 620x520x200mm 820x520x200mm Fgodshuphrspfx Akhof 820x520x250mm Completely welded stainless steel housing to protect the magnetic core Ring eyelets for hanging Cleaning drawer for easy removal of accumulated impurities. Installation above all conveyor systems possible...

Year of construction: 2021, condition: new, machine/vehicle number: 2021052701, Aluminum flat belt conveyor without substructure Belt length: 6000mm Fgjdpfog D T N Hjx Akhof Drive roller: knurled Idler roller: crowned, over-rotated PVC conveyor belt Conveyor belt EM 15/2 0+17 PVC blue, FDA compliant according to EU10/2011 Belt width 500mm, outside Wave edge welded on both sides, 40mm high T-30 studs (61 pieces) - 200mm pitch * antistatic due to threads in the fabric of the running side Endlessly welded with a stepped finger joint Food-grade certificate included V2A stainless steel backing plate, full surface Drive: Motor approx. 1.1kW - horizontally mounted * optionally controllable with a frequency converter Connection 220/

Year of construction: 2022, condition: new, Aluminum flat conveyor belt with substructure Fgsdpfxeht U H Hs Akhof Dim: approx. 4000 x 300mm Aluminum construction Full-surface underlay sheet Drive: gear motor 0.18KW GEMOTEG Connection 220/400V, 50Hz Protection class IP54 Drive, motor control optional 4 pcs. machine feet for leveling, height of the conveyor belt upper edge 400mm PVC transport tape EM 10/2 0+12 PVC green hard cover Endless welded with stepped finger connection Fabric insert green Supporting side with 12 PVC cleats T40 welded on in the middle, pitch approx. 508mm Supporting side with 2 piece, flush welded corrugated edges with fabric insert, green approx. 40mm high, approx. 35mm wide. Arrangement across +35-5+220-5+35mm

Year of construction: 2019, condition: excellent (used), Plate magnet, lifting magnet, overbelt magnet, police magnet, magnetic filter, magnetic separator Overband plate magnet Execution in VA 1.4301 tightly welded SrFe strontium ferrite magnetic core, deep magnetic field! Dimensions: 620x520x200mm 4 - piece M16 eyebolts on the back This lifting magnet was used by one of our customers as a "police magnet" in the meat processing industry. The price mentioned refers to 1 piece. Currently only 1 piece available from stock! All information without guarantee, only while stocks last! Fgedpfxjhuphvo Akhef Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator Our core competence lies in supplying the customer with exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Overband plate magnet Execution in VA 1.4301 tightly welded 420x420x200mm 420x420x250mm 620x420x200mm 620x520x200mm 820x520x200mm 820x520x250mm Completely welded stainless steel housing to protect the magnetic core Ring eyelets for hanging Cleaning drawer for easy removal of accumulated impurities. Installation above all conveyor systems possible...

Condition: used, Year of construction: 2019, operating hours: 1,520 h, Wacker Neuson ET16 mini excavator, manufactured in 2019, with only 1,520 operating hours! ---- * Manufacturer: Wacker Neuson * Type: ET16 * Year of manufacture: 2019 * Operating hours: approx. 1,520 * Operating weight: approx. 1,715 kg * Includes 3 buckets * Fully enclosed cabin Fsdpfxozq Ahvs Akhogf * Adjustable undercarriage * Video available upon request * Price: 13,900 euros, net + 19% VAT ---- For further questions, please call: Erik Kortum: WhatsApp All information provided without warranty; errors and prior sale reserved.

Condition: excellent (used), Year of construction: 2002, including Sheetmaster, Toolmaster, and Gripmaster Fgodpfxszp Dwpj Akhef Hours: 11,800 Location available upon request Images available upon request

Condition: ready for operation (used), Siemens 6EW1160-5AF power supply, internal mounting unit. A 2025254, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Fjdpfji Edwusx Akhsgf

Condition: good (used), Heidelberg Stahlfolder Ti 52 4/4/1 Folding Machine Machine configured for folding up to 16 pages. Technical specifications: Minimum paper size: 105 x 150 mm Maximum paper size: 520 x 840 mm High stack feeding Fgodpfx Akozmu Hiohof Configuration: – 4 cassettes on the first module Ti-52 – 4 cassettes on the second module 2.Ti-52 – 1 electronic knife – Mobile delivery Inverter-controlled folding speed adjustment Cassette noise reduction Becker compressor Double sheet sensor Electronic counter with batching Electric delivery with adjustable delivery speed. Spare parts, tools, and documentation included. The machine is in good condition and ready for operation.

Condition: good (used), CMC Italia Gemini Gem 52 Case in gluer Machine in perfect condition, like new. Manufactured by CMC Italia, Italy. This gluing device allows for the application of glue to both sides of the book block. Two gluers, smooth glue thickness adjustment. Chrome rollers, adjustable glue thickness. Very easy to clean. Working width: 520 mm Power supply: 380 V Weight: 250 kg Made in Italy. Fgsdpezlgglsfx Akhef

Condition: good (used), Heidelberg Stahlfolder Ti 52 4/4 Folding Machine Machine in very good condition, ready for operation. Technical specifications: Minimum paper size: 105 x 150 mm Maximum paper size: 520 x 840 mm High stack feeding Configuration: – 4 cassettes on the first module Ti-52 – 4 cassettes on the second module 2.Ti-52 Fgjdpfxezlgc To Akhef – Mobile delivery Infinitely variable folding speed control via inverter Cassette noise reduction Compressor included Double sheet sensor Electronic counter with batching Electric delivery with adjustable delivery speed. Spare parts, tools, and documentation included. Made in Germany.

Condition: good (used), Year of construction: 2018, Geared motor, electric motor, electric geared motor, worm geared motor -Manufacturer: Dalian NET, worm gear motor -Gearbox: Type NMRV 050 1:100 -Speed: 9 rpm -Engine: Type Y2-802-6 -Power: 0.55 kW -Protection rating: IP55 Fgodpfjy Ai N Hox Akhsf -Shaft: Ø 25 x 90 mm -Dimensions: 390/200/H250 mm -Weight: 18.8 kg

Condition: good (used), Year of construction: 2020, Geared motor, electric motor, electric geared motor, worm geared motor -Manufacturer: Dalian NET, worm gear motor -Gearbox: Type NMRV 1:10 -Speed: 143 rpm -Engine: Type Y2-90S-4 -Power: 1.1 kW Fgjdpfx Aey Ai T Ejkhsf -Protection rating: IP54 -Shaft: Ø 28 x 110 mm -Dimensions: 440/220/H260 mm -Weight: 24 kg