Used Stankoimport Mit Zubehör for sale (6,710)

Year of construction: 2026, operating hours: 1 h, condition: like new (used), functionality: fully functional, machine/vehicle number: S23SynthesiWaage03, Exhibition machine, like new. SYNTHESI integrated with scale Pallet weighing system integrated in the machine FILM SLIDE TYPE “FE” (ELECTROMAGNETIC BRAKE) Foil application tension electronically controlled via control unit Foil specification Max. outer diameter Ø250mm - height = 500mm - core Ø76mm Standard connection values: 230 V - 1PH+N+PE - 50/60 HZ TECHNICAL DETAILS: Turntable 1500mm (Optional 1650mm) Wrapping height (pallet included) 2,200 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Dwjdpfxjz Ipdvj Akmoc Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Other systems available from the Ludwigsburg warehouse.

Condition: used, Universal milling head, milling adapter, milling extension, angle milling head -Spare part: from a Stankoimport milling machine -Milling head: with quill Dwsdpjb Iwrisfx Akmjc -Recording: Exit -Recording: Entrance -completely swiveling -impact head -Equipment -Pitch circle -Dimensions: 1200/800/H300 mm -Weight: 200 kg -Sale only in full

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Weiler Matador VS-2 lathe with lead screw and tailstock, featuring a 3-axis digital display from Elesta, from a training workshop!! Technical data: >> Machine no. 88-8115, year of manufacture 1988 >> Center height 140 mm >> Center distance 500 mm >> Speed: 15 – 3550 RPM >> Spindle bore 36 mm >> Short taper spindle head DIN 55022-5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.012 to 0.9 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 12 mm >> Brake motor >> Weight approx. 700 kg >> Length 1.4 m, height 1.2 m, depth 0.55 m Dwsdey Tmkvspfx Akmjc Accessories and equipment: >> 3-axis digital display Elesta >> Quick-change tool post, internal and external collets (see picture) >> 1 three-jaw chuck, 1 set of jaws >> Mulifix size A with 3 steel holders >> Spindle guard >> 1 bed stop >> Change gears >> Follow rest >> Machine feet About the machine: A Weiler Matador VS-2 in very good condition is offered for sale. The machine is fully functional. The slides all move smoothly and evenly. Even at high speeds, the Weiler runs smoothly. The original location of the Weiler was a training workshop. The machine is equipped with a wide range of accessories. Take the opportunity to inspect this machine on-site while it is powered up and to convince yourself of its very good condition.

Condition: used, Year of construction: 2013, operating hours: 3,000 h, functionality: unexamined, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, For sale as a complete package: Waterjet Cutting Machine STM 3015, year 2013, with computer from 2018 and 3 network dongles for IGEMS software. Working area: 3000x1500mm High-Pressure Pump Ecotron 40.37, year 2013 Water Softening System, year 2018 – like new Abrasive Backwash System, year 2013 Column Slewing Crane Abus 2t, year 2018 – like new Vacuum Lifting Device Devo-Tech, load capacity 1800kg – like new Various accessories and sandbags available The system was purchased at the end of 2018 and commissioned at the beginning of 2019. The waterjet system and pump had been completely overhauled by the supplier at that time. Unfortunately, the cutting system was hardly used. It only ran for a few hours per year and has not been in operation since about July 2025. The high-pressure pump is defective (leaks water and is not sealed). Both high-pressure cylinders have been replaced in recent years. Last serviced in 2025. According to the service technician, repair of the pump would cost approx. CHF 5,000 to 6,000. The crane and vacuum lifting device can also be purchased separately. Please send your offer with price expectations. In 2019, the new price for the crane and vacuum lifter was around CHF 37,000 incl. VAT. The machine can be inspected during business hours. It is still connected, but has been drained and cleaned. Dsdeyq Rdyopfx Akmewc Please arrange appointments or submit offers via email, not by phone.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25MythoSarya10, Mytho S Dsdpfx Akoz Ipunemowc with TP / Transparent, accessible at ground level with lift trucks and El. lifts. MAST VERSION Winding height 2450 mm 99 program TOUCH display 7" FILM SLIDE TYPE "PRS" (POWER ROLLER STRETCH) 200% pre-stretching Optionally, more or less pre-stretching possible TURNTABLE / TP Ø1650 mm / Opening 06.00 - Mast 12.00 (can be changed at any time) ARYA system for automatic foil blowing and cutting, incl. infrared remote control

Year of construction: 1991, condition: excellent (used), Fully automatic gate system HDN 600 with automatic infeed ZE, including mechanization. Technical data: Passage height: 700 mm Passage width: 735 mm Stroke: 600 mm Feed rate: max. 15 m/min Water-cooled guides Drive – Gearbox Dwjdpfx Aez Ehfajkmec The system has demonstrably only been in operation for 10 years.

Condition: excellent (used), functionality: fully functional, Swivel spindle milling machine KÖLLE F 45 in very good condition; this machine comes from an assembly company and has been idle for the last few years, as it was no longer needed. Everything functions perfectly. All bearings and guides are in good condition; the machine runs very smoothly. Year of manufacture: 1990 with control panel on top Both fence jaws on the milling fence can be adjusted in depth, with fine adjustment and scale, allowing for planing work, e.g., on a gluing profile. The entire milling fence can also be adjusted in depth using a handwheel and a leadscrew, enabling very precise and fast adjustments. with AIGNER integral fence with spindle locking lever Chips can be removed very effectively with 2 extraction ports, 125 mm on the milling fence and 100 mm on the machine table. with 30 mm spindle, which can be swiveled steplessly from -5 to 45°; the spindle is swiveled electrically with a very precise display; fine adjustment can be made manually with a handwheel. The height adjustment is also electric, and a handwheel is also available for fine adjustment. with right/left rotation We will personally deliver and demonstrate the machine anywhere in Germany for €220.00, so you have no risk when purchasing; shipping to Austria and the rest of the EU is also possible upon request. with a large table opening of 375 mm, which can be reduced by using various rings (this allows for the use of cutters with a very large diameter, and you can also safely mill with small cutters). with 3000, 4000, 5000, 6000, 8000 and 10000 rpm the table is made of heavily ribbed cast iron with 30 mm spindle in the machine; another spindle can also be installed very robust and durable design; the machine was built for heavy-duty milling operations and is suitable for all milling applications. optimal power transmission through belt drive with instruction manual with 3-roller feed system HOL HER, type ET 117 the feed system has right/left rotation and 8 speeds; the feed rollers are individually mounted and are all in new condition. the machine table is 1000 mm deep and 1200 mm wide; it has an extendable support table 1200 mm long. the machine is ready for immediate use. 380 V, 4700 and 5700 W due to the 2 speeds with all necessary safety devices, motor brake, and emergency stop switch; the machine is approved by the German Wood Trade Association (Holz-BG) and has the GS safety mark. the machine weighs approximately 1000 kg with motor protection switch against overload professional-grade machine, not a hardware store reject Dwodpfx Akezt Ai Eemsc optimal, simple, fast, and safe operation

Condition: good (used), Year of construction: 2007, functionality: fully functional, Kolbe MWE-32 Meat Grinder Mixer In good used and working condition. New belt and motor. The machine runs on 400 volts, is made entirely of stainless steel, has a mixing paddle, is 98 cm Enterprise, has been tested in the workshop, and is ready for immediate use. FD 200 loading, built in 2009. The machine is built in 2007. Dsdpswcgr Eofx Akmjwc Further information upon request. Cash or advance payment. Sale to businesses only. No guarantee. No warranty.

Condition: used, functionality: fully functional, Year of construction: 1995, operating hours: 10,567 h, We are selling a mobile excavator O&K MH PLUS, manufactured in 1995, with various accessories. The operating hour meter reads 10,567. The tires were replaced approximately 4 years ago and show very little wear. Various hydraulic hoses have been replaced. See photos. The excavator is used very rarely and is always stored in a covered hall. Deep digging bucket: approx. 30 cm Deep digging bucket: approx. 80 cm Dwjdpfxsz Hb Nne Akmjc Ditching bucket: approx. 200 cm The excavator must be picked up on site.

Condition: excellent (used), functionality: fully functional, mileage: 420,000 km, gearing type: semi-automatic, fuel type: diesel, MAN TGS with Fassi 1300 T/M crane New TÜV and UVV inspection certificates Tires in good condition Vehicle has been partially repainted and is rust-free Dwedpfxjz Ii Uho Akmjc Semi-automatic transmission 480,000 km

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25MythoSarya05, Mytho S with TP / Transparent, accessible at ground level with lift trucks and El. lifts. MAST VERSION Winding height 2450 mm 99 program TOUCH display 7" Dwsdpfx Akeykuh Nomec FILM SLIDE TYPE "PRS" (POWER ROLLER STRETCH) 200% pre-stretching Optionally, more or less pre-stretching possible TURNTABLE / TP Ø1650 mm / Opening 06.00 - Mast 12.00 (can be changed at any time) ARYA system for automatic foil blowing and cutting, incl. infrared remote control

Condition: new, Hydac 3206365 CO - unit with G 80C4 3030923 motor SN: 13-Z180034, valve block, DB4E-CE safety valve, EDS 3446-2-0250-000 pressure switch, SBO200-1E1/112U-200AK pressure accumulator - 135 bar and liquid level control - with instructions and certificate, unused, 100% functional, scope of delivery as per photos Dwodpfonkqz Rex Akmjc

Condition: excellent (used), functionality: fully functional, Year of construction: 1970, Vertical impact testing machine, complete with all accessories. Diameter up to 450 mm. Dwjdpjz N Spxjfx Akmec

Condition: ready for operation (used), Rexroth RF03 12 305054 circuit board for rotary encoder with accessories, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. Dwjdpfx Ajzzhlzokmec

Condition: new, functionality: fully functional, Aerial work platform, work basket with platform for forklift (like new) Width: 870mm Depth: 870mm Guardrail height: 1020mm / 1500mm / Total height of forklift protection mast: 2330mm Includes extension: 480mm with side access With forklift mounting distance: min: 550mm – max: 940mm Forklift tine receiver: width max. 190mm x height 90mm Dwjdpfx Akjzyu Tijmec Available in stock.

Condition: ready for operation (used), Hioki 8811 waveform memory writer with accessories, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Dwjdpfxsi Ea I Ts Akmsc

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Dowel and long-hole drilling machine GANNER JUNIOR 320 LBM in very good condition, like new, the machine comes from a small carpentry shop and was used very little there it can be used to mill long holes and drill dowel holes in 2 levels without reclamping 380V, 1500W Speed: 2800 rpm Year of construction: 1990 with this machine, you can mill long holes for, for example, lock housings and similar items, or create all types of frame dowel joints at right angles, flush, and mitered ideal for the production of dowel joints in timber frame construction, furniture, door, window, and stair construction, and for similar applications drilling on 2 levels, the grid and stops, and the design of the machine allow dowel joints to be produced in a very short time, which makes the machine very economical the machine requires a compressed air connection of 6 bar (air consumption is very low) Right-hand rotation mills and drills very well and cleanly with 2 angle stops (one center stop and one side stop, which can be used on both sides) 2 stop rails can be attached on the left and right, the stop rails are 1000 mm long, each with 2 folding stops the workpiece is clamped using 2 pneumatic clamping cylinders the height adjustment from one drilling level to the other is also pneumatic; the pneumatic switch for this is located at the front of the machine, which ensures fast adjustment of grids and drilling levels with a precision 12mm grid rail, which has a center grid and 12 grids on the left and right can be quickly converted for long-hole milling; the machine can then be used without a grid with 2 adjustable stops on the left and right, and then has a working width of max. 420mm the max. borehole height is 100mm the max. borehole depth is 150mm with stop and scale the max. workpiece height is 160mm Dsdpez I Eggjfx Akmowc everything works perfectly we will personally deliver and demonstrate the machine anywhere in Germany for 220.00 euros, so you have no risk when purchasing; delivery to Austria and the EU is also possible on request the machine table is 870mm wide, 140mm deep on the sides, and 350mm deep in the middle professional equipment, not cheap hardware store junk you can start working with the machine immediately with 2 chucks up to 20mm very stable and durable construction the precision guides with the backlash-free ball bearing bushings are in good condition and move smoothly

Condition: used, Year of construction: 2023, rear tire size: 0%, We are offering for sale one used Bergmann M 201 crawler from year 2023 with approximately 155 operating hours. Equipment: radio-controlled crawler, payload 500 kg, unladen weight 1200 kg, lifting capacity 6000 N, height 1287 mm, length 2087 mm, width 1350 mm, rubber tracks 2800 mm wide, angled tread for slope stability, self-cleaning feature, water-cooled 3-cylinder Hatz diesel engine, output 42 kW at 2800 rpm, radiator fan with reversible drive for self-cleaning, hydrostatic travel drive, 0-8.5 km/h. 12V system, LED headlights, hydraulic multi-coupler, one high-performance hydraulic circuit up to 85 L/min, two auxiliary hydraulic circuits up to 10 L/min each, including Müthing mulcher with a working width of 1.40 m, including Seppi mulcher for processing brush and wood up to a diameter of 15 cm. Djdpfx Ajyq Aw Sjkmowc Further details available on request. Location: 93095 Hagelstadt.

Year of construction: 1986, condition: used, functionality: fully functional, For sale is a complete silo discharge and conveying screw system from a wood processing production facility. The system was in regular operation until production was halted approximately 6 months ago and was subsequently decommissioned. The complete package includes the mechanical silo discharge system, several conveying screws or transport lines, various gear and electric motors, the complete associated electrical control system in the control cabinet, as well as an additional new or unused spare motor. The system was used for discharging and further conveying wood chips or similar bulk material from the silo towards the heating system. Scope of delivery The offered complete package includes, among other things: - complete mechanical silo discharge system - several conveying screws / tubular screws - existing transport and conveying lines - several gear motors and electric motors - Bonfiglioli gearboxes - SEW-EURODRIVE drive technology - NORD gearbox technology - ASEA, ICME and Dietz electric motors - various connection, transition and discharge components - complete control cabinet with control and switching components The complete existing control cabinet is part of the offer. This offer includes not only individual conveying equipment but a comprehensive, cohesive system and spare parts package including the existing control system. Drive technology Various industrial motor and gearbox components from well-known manufacturers are installed. Among others: Bonfiglioli Riduttori Dedpfx Ajz Iuikokmowc Gearbox type MVF 130/2R, 4.00 HP, gear ratio i = 1/35. ASEA Three-phase motor, 0.55 kW, 930 min⁻¹, 380–420 V, protection class IP54. SEW-EURODRIVE Industrial gear motor, 0.55 kW, approx. 1,400/33 min⁻¹. NORD Industrial gearbox, type SK 30F-EC80, gear ratio i = 157.20. ICME Ravenna Three-phase motor, 0.55 kW, approx. 920 min⁻¹, protection class IP55. Dietz-motoren Three-phase motor, 0.4 kW, 2,760 min⁻¹, 220/380 V. Further technical specifications and photos of the existing nameplates can be provided upon request. Condition The used components are in a condition appropriate for their age and use. Signs of wear, dust deposits and some superficial corrosion are present. The system is suitable both for possible further use or adaptation to an existing silo system and as a comprehensive spare parts and components package for silo, heating and conveying technology. In particular, the various gear motors, gearboxes, screw components, the complete electrical control system and the additional new spare motor make the complete package interesting for operators of existing older systems. Inspection / Dismantling The system is still located at the previous production site and can be inspected by appointment. Location: 3608 Thun, Switzerland Availability: immediately Dismantling can begin immediately - must be completed by July 31, 2027. Dismantling, removal, loading and transport will be carried out entirely by the buyer at his expense and responsibility. Sale of the complete system in its existing condition, as inspected. Subject to prior sale. Sale with exclusion of guarantee and warranty. Selling price: 4,500.00 EUR Price net, any applicable statutory taxes and duties. Export, customs clearance and import duties are the responsibility of the buyer.

Condition: used, amount 1 Palette Wooden box containing a variety of metal parts. Dodpfszg Nk Njx Akmowc -> Precision steel blocks — cleanly ground, right-angled blocks with holes. They are typically used as stops, spacers, clamping aids, or measuring aids. -> Angle and V-blocks — large, angular pieces with slanted recesses. They are used to securely clamp round or irregular workpieces. -> Clamping plates / perforated strips — long metal strips with many evenly spaced holes. Typically used for flexible fixtures where different parts can be combined. -> Small square blocks with a center hole — presumably spacers, centering aids, or modular components for fixtures. Sorting boxes — contain screws, small parts, or other clamping components. Complete Package Price

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Synthesi01, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 2,400 mm Max. pallet dimensions: 1,650 x 1,650 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,400 mm FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically adjustable in the programs in different steps Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations Dwjdpjz Iqp Tjfx Akmsc The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Optionally possible: Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge. Illustration similar

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S26LybraOPRS03, LYBRA Easy OPRS / 6 Programs With automatic cord formation to reinforce the winding in various steps on the pallet. The LYBRA OPRS is a semi-automatic stretch wrapping machine with a rotating arm that combines key load securing technologies in a compact solution. Thanks to the rotating arm, it is particularly suitable for heavy and unstable loads and optimizes load stability during handling, storage, and transport. ``` TECHNICAL DETAILS - Control panel with key display - Diameter Ø 1,700 mm - Maximum loading dimensions: 1,200 x 1,200 mm - Winding height (incl. pallet): 2,450 mm - Loading height measurement via photocell in automatic mode - Acceleration/deceleration ramps controlled by frequency converter - Adjustable lifting speed (up/down movement) via frequency converter - Safety touch protection - Mushroom-shaped emergency stop button compliant with CE standards - Machine reset button compliant with CE standards - Audible signal at cycle start and phase stop at cycle end ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters adjustable via display - Standard cycle (up and down) - Half cycle (up only or down only) - Full cycle with lower windings on the same Starting height - Fast cycle (with limited or no overlap) Dwjdpfx Akoz Ir Hasmjc - Layer cycle - Economy cycle (to save some bottom wraps) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 operator-created wrapping programs - All function parameters adjustable on the display - Adjustable speed from 5 to 12 rpm - Carriage lifting speed (up and down movement) independently adjustable from 1.3 to 5.4 m/min - 1 to 10 wraps on the bottom - 1 to 10 wraps on the top - Reinforcement wraps during the wrapping process ACTIVABLE FUNCTIONS: - Key lock - Cycle with start and stop at pre-programmed height - Pallet wrapping height with height sensor (photocell off) - Top sheet cycle, soft start cycle - Wrapping cycle with reinforcement and adjustable number of wraps - Comfort height for easy Roll Change FILM SLIDE OPRS – Motorized pre-stretching system with 2 electronically driven rollers with interchangeable ratios: 150% - 200% (standard) and 250%; – Outer film roll diameter: 250 mm; – Core diameter: 76 mm; – Roll height: 500 mm; – Roll weight: 20 kg; Additional systems available immediately from our Ludwigsburg warehouse. Image similar, may include options.

Condition: used, amount 1 Palette Wooden crate containing a variety of metal parts. These include: Dwodpfx Ajzg Nk Aekmec -> Precision steel blocks -> Mold inserts / dies -> Semicircular segments / clamping jaws -> Spacers / fitting pieces -> Clamping and jig parts -> Cylindrical and cross-section profiles Complete package price

Condition: excellent (used), Buderus GE615 /820Kw boiler with Weishaupt burner Dedpeq Am Ivefx Akmjwc

Condition: excellent (used), Viessmann Vitoplex/105kw low-temperature boiler with oil burner Dwsdpfx Akewauaxsmsc