Used Stas Biostar 90,6 Cbm for sale (6,764)

Condition: used, axle configuration: 3 axles, first registration: 08/2026, loading space volume: 90 m³, Year of construction: 2026, Equipment: ABS, Axle spacing (mm) 1310-1310 Fifth wheel height (mm) 1150 Chassis width (mm) 1200 Loading width (mm) 2475 Internal height front (mm) (IHF) 2641 Internal height rear (mm) (IHB) 2778 Loading length (mm) 13513 Chassis neck height (mm) 217 Overall width (mm) 2550 Overall length (mm) 14000 Axles, brakes, and suspension Axles: SAF Brake type: Disc brake Brake type: SAF - SBS 2220 Offset (ET) 120 Option 1: Axle with lift axle and starting aid Starting aid activation via button in the truck Option 3: Axle with lift axle Brake pad wear indicator ECAS air suspension with raise and lower valve Lowering of air suspension via Smartboard, as well as raise and lower valve Control console, EBS operation on the left side in the direction of travel, behind the axles Standard Smartboard Air and electrical connection console in the center with gantry As a steel gear support winch, type Weweler, with support feet, one-sided operation, and 2 speed levels Position of support handle of the support winch on the outside Tires: 385/65R22.5 Wabco Trailerpulse Tire type: Regional distance TPMS sensor type: Rim-mounted sensor TPMS sensor supplier: ZF Lighting: Aspöck Lighting type: ECOLED III 2 LED reversing lights, mounted at the rear in the direction of travel on the left and right on the lamp carrier Position of work lights (operated via switch): 2 LED reversing lights at the front in the direction of travel LEDs in the door frame crossmember: 2 x 3 LEDs Splash guard, underrun protection Control console, sliding floor on the left behind the axles Hydraulic coupling, fifth wheel coupling - size 3/4, return line on the right Hydraulic coupling - gender: Female, return line to fifth wheel coupling Hydraulic coupling return line - size 1 - gender: Female Hydraulic coupling - hose 3,000 mm Hydraulic coupling - position: Connection option on the front wall (also with connection option on the support legs) Toolbox, direction of travel, air connection on the side of the instrument panel Aluminum access ladder 3.80 m - on the right in the direction of travel Position of broom and shovel holder on the side underrun protection on the left in the direction of travel Distance from the lower edge profile to the upper side wall at the rear: 2649 Profile, front wall: 3 mm - 2 mm Service door on the left in the direction of travel Side wall Profile, side wall: 3 mm - 2 mm Wear plates, rectangular: 1500 x 1000 x 4 mm Sliding floor system, manufacturer: Cargo Floor Operation of floor system: Wireless remote control Cargofloor Control type: CF 500 SL-C - E-CONTROL Number of floor profiles: 21 Floor profile: 8 mm ribbed, sliding floor, stainless steel With additional plastic guides under the floor profiles End cap reinforcement: Stainless steel shoes over the end caps of the floor profiles, with aluminum wear plate above the end caps Oil temperature sensor for sliding floor system Complete discharge wall: ALU Storage of complete discharge wall: 6 wheels Rear door Rear wall type: Swing doors Rear wall: Aluminum Design of swing door: 1/2 to 1/2 split, with door frame crossmember Opening of the door leaves: The right door leaf opens first Door frame crossmember: In a pivoting design Material of door frame crossmember: Aluminum Locking of rear doors: 1x twist bar / door half Dsdozir Ivspfx Akmjku Number of door handles - door leaf left: 2 door handles per twist bar Number of door handles - door leaf right: 1 door handle per twist bar Fastening of the open door leaves: Spring holder with plasti

Condition: used, first registration: 05/2026, loading space length: 13,513 mm, loading space width: 2,475 mm, loading space height: 2,641 mm, loading space volume: 91 m³, total length: 14,000 mm, total width: 2,550 mm, Year of construction: 2026, Equipment: * Chassis material: Steel * Chassis type: Moving floor * Kingpin load (national, t): 12 * Axle load (national, t): 8 * Axle spacing (mm): 1310-1310 * Saddle height (mm): 1150 * Chassis width (mm): 1200 * Loading width (mm): 2475 * Chassis series: 135 * Wheelbase (WB) moving floor trailer (mm): 7850 * Internal height front (mm) (IHF): 2641 * Internal height rear (mm) (IHB): 2778 * Loading length (mm): 13513 * Chassis neck height (mm): 217 * Total width (mm): 2550 * Volume (m³): 90.6183 * Total length (mm): 14000 * Axles: SAF * Axle version: Intra * Brake version: Disc brake * Brake type: SAF - SBS 2220 (Haldex) * Offset (ET): 120 * Option 1st axle: lift axle with traction aid * Activation of traction aid via button in truck (button installation not included) and by pressing the brake pedal three times * Option 3rd axle: with lift axle * Brake pad wear indicator connected * Return-to-ride (RTR): 15 km/h * Air suspension: ECAS with lift and lower valve * Lowering of air suspension via Smartboard and lift/lower valve * Pneumatic coupling head: European palm coupling * Operating console: EBS operation on the left in the direction of travel, mounted behind axles * Standard Smartboard * Central air and electrical console with gallows * Landing gears: Weweler * As steel gear-type landing legs, Weweler model, with compensating feet, single-sided operation and 2 speed levels * Landing leg crank handle position: outside * Tyre size: 385/65R22.5 * Tire pressure monitoring: Wabco Trailerpulse * Rims: steel * TPMS sensor type: rim-mounted sensor Dkedpfx Akoy Dmu Nomeu * Wheel nut caps: black - PVC with STAS logo * Lighting type: ECOLED III - with STAS logo * Reversing lights: 2 pcs LED reversing lights, rear left and right in direction of travel, mounted on lamp bracket * Working light position (operated by switch): 2 pcs LED reversing lights at the front, left and right in the direction of travel, mounted near the landing gears * Lighting unit protection: one-piece mudguard * LEDs in rear door crossmember: 2 x 3-function LED * Operation underrun guard: Fixed underrun bar * Splash guards for underrun guard: black with STAS logo * Hydraulic coupling: rotary coupling * Hydraulic coupling - size: 3/4 * Hydraulic coupling - gender: Female * Hydraulic return coupling: rotary coupling * Hydraulic return coupling - size: 1 * Hydraulic return coupling - gender: Female * Hydraulic coupling hose: 3,000 mm * Hydraulic coupling position: connection option at front wall (additional connection option at landing leg) * Hydraulic positioning: pressure left, return right (CON) * Number of splash guards at mudguard: 2 pcs * Toolbox * Air connection: side-mounted on control panel * Aluminium ladder 3.80 m - right side in direction of travel * Broom and shovel holder * Two plastic wheel chocks * Bulkhead profile: 3 mm - 2 mm * Side wall profile: 3 mm - 2 mm * Moving floor system manufacturer: Cargo Floor * Floor system operation: radio remote control * Cargo Floor control type: CF 500 SL-C - E-CONTROL * Number of floor profiles: 21 * Bulkhead angle (°): 90 * Rear wall angle (°): 90 * Floor profile type: 8 mm ribbed * Oil temperature sensor for moving floor system * Clean-out wall: aluminium * Clean-out wall mounting: 6 wheels with bi-directional cleaning (Cargo Floor) * Door type: double-wing doors, divided 1/2 to 1/2, with crossmember at door end

Condition: used, overall weight: 36,000 kg, first registration: 12/2022, next inspection (TÜV): 02/2027, loading space volume: 91 m³, Year of construction: 2022, Equipment: ABS, bioSTAR 91 cbm/8 mm floor/forklift compatible/steel rims Internal length of the body: 13500 MM Internal width of the body: 2475 MM Internal height of the body: 2650/2825 MM Volume of the body: 91 cbm Wheelbase: 1310 MM Saddle height: 1150 MM TECHNICAL DESCRIPTION 1. FRAME SUBFRAME: High-quality construction made of steel S355JR (= ST52.3). Chassis not painted, but galvanized (EN ISO 1461), hot-dip galvanization. SADDLE HEIGHT: The exact saddle height is 1150mm. AXLES: Tridem: Manufacturer: JOST (EX-MERCEDES) = MANUFACTURER'S CHOICE. Capacity: 3 x 9 tons. Suspension: Original JOST air suspension. Brakes: Large disc - Offset: ET 120. BVA: with BRAKE WEAR INDICATOR (BVA) connection. The first and third axles are automatic lift axles (automatic lifting when unladen, automatic lowering when loaded). The lift axles are controlled via the EBS-E system. Both axles lift independently. The starting aid is activated when a button is pressed in the truck (truck equipment not included). AIR SUSPENSION: Lifting and lowering device. Aluminum air tank. 6 x 385/65 R 22.5 tires for regional transport on steel rims. ET 120. SADDLE SUPPORTS: WEWELER with leveling supports for air-sprung vehicles. Mechanical version with single-sided operation and 2 speed levels. BRAKE SYSTEM - EBS: EBS-E system WABCO 2S/2M - PREMIUM MODULATOR. 2-circuit compressed air brake system according to CE directives. Spring-loaded parking brake acting on 2 axles. With SMARTBOARD. R.S.S. (Roll Stability System). LIGHTING: ASPÖCK 24-volt electrical system. 2 x 7-pin + 1 x 15-pin sockets, ISO connection. Aspöck kit. Orange LED lighting is mounted on the side of the trailer. Without distribution box at the rear - NORDIC. REAR LIGHTING IN THE UNDER RIDE GUARD: The lighting is mounted in the fixed aluminum under ride guard. With aluminum lighting protection (foldable). 2 x 1 five-chamber light - EUROPOINT III - LED version. WORK LIGHTS ON THE FRAME: 2 x LED WORKPOINT work lights in front of the axles and 2 x behind the axles - with switch on the control console. HYDRAULIC SYSTEM: Edbro hydraulic system: Pressure: 1 female. TYPE ARGUS HDK. Return line: 1 female, TYPE ARGUS HDK DA VINCI 29227. HYDRAULIC HOSES: Hydraulic hoses 3/4 - 1, length 3,000 mm. HYDRAULIC POSITION: Connection on the front wall. With an additional connection option below the body in front of the supports. ACCESSORIES: 3 holders for broom, shovel and scraper Aluminum ladder (3.7 m) With air connection mounted in the toolbox. Retractable ladder integrated at the rear of the vehicle, on the right side. With pneumatic central locking. With TÜV certificate for load securing. With standard side impact protection. Toolbox PVC. POSITION CONTROL CONSOLE + HYDR. SYSTEM BOX: The control console is mounted in front of the axles on the left side. The box for operating the system from the ground is also mounted in front of the axles on the left side. FENDER: 6 plastic single-wheel fenders. 2 Clear Pass splash guards are permanently mounted on the plastic fenders. SPLASH GUARD: A retractable splash guard (black - EBB) over the entire width of the under ride guard. WHEEL CHOCKS: With two plastic wheel chocks with holder. 2. DUMP BODY FRONT WALL: The front wall consists of strong aluminum plank profiles. Dkedpfx Akoz Nuhkjmju COVERING INSIDE BETWEEN FLOOR-FRONT WALL: Fixed sealing between floor and front wall by means of aluminum profile and PVC sealing. SIDE WALLS: Side walls in smooth design inside and outside. Double-walled s

Condition: used, maximum load weight: 27,500 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2023, next inspection (TÜV): 06/2025, loading space volume: 100 m³, Year of construction: 2023, Equipment: ABS, bioSTAR, approx. 100 cbm, 14.9 m internal length silver-grey BIOSTAR - STEERABLE AXLE - V14900 - VERTICAL FRONT WALL - VERTICAL REAR DOOR Internal length of the body: +/- 14900 MM Internal width of the body: 2475 MM Volume of the body: approx. 98.6 cbm Dkjdpfsxplxzox Akmeu GVW: 36 T Wheelbase: 1310 MM Unladen weight: 8500 kg Saddle height: 1150 mm TECHNICAL DESCRIPTION 1. CHASSIS SADDLE HEIGHT The exact saddle height is 1150 mm. AXLES Tridem: Manufacturer: SAF - CUSTOM DESIGN (CD) Capacity: 3 x 9 T Suspension: Original SAF air suspension Brakes: large disc Offset: ET 120 BVA: included The first axle is an automatic lift axle controlled via the EBS-E system. The third axle is a trailing steerable axle. CONNECTION BRAKE WEAR INDICATOR (BVA) Brake wear indicators are connected. LIFT AXLE FUNCTION: Without lift axle. With starting aid. STARTING AID The starting aid is activated by pressing a button in the truck (truck equipment not included). AIR SUSPENSION Lifting and lowering device. Aluminum air tank. LOCKING OF TRAILING STEERABLE AXLE Locking of the trailing steerable axle is done as follows: - via the rear lights - with a button in the truck (truck equipment not included) TIRES 6 x 385/65 R 22.5 tires for regional transport (manufacturer's choice) on aluminum rims ALCOA MATT. ET 120. BRAKE SYSTEM - EBS EBS-E system WABCO 2S/2M - PREMIUM MODULATOR 2-circuit compressed air brake system acc. to CE guidelines. Spring brake parking brake acting on 2 axles. With SMARTBOARD. R.S.S. (Roll Stability System) LIGHTING - ASPÖCK 24 Volt electrical system. 2 x 7-pole + 1 x 15-pole sockets ISO connection. Aspöck set. Orange LED lighting is mounted on the side of the trailer. Without distribution box at the rear - NORDIC. REAR LIGHTING IN THE UNDER RIDE GUARD The lighting is mounted in the fixed aluminum under-ride guard. With aluminum lighting protection (foldable). 2 x 1 five-chamber light - EUROPOINT III - LED version. HYDRAULIC CONNECTION Connection on the front wall. With additional connection option below the body in front of the support legs. ACCESSORIES RETRACTABLE LADDER REAR Retractable ladder integrated at the rear of the vehicle, on the right. PNEUMATIC CENTRAL LOCKING With pneumatic central locking. TOOL BOX PVC tool box with key (800 x 460 x 430 mm) SPARE WHEEL HOLDER Aluminum spare wheel holder (single) 2. TIPPER BODY FRONT WALL The front wall consists of sturdy aluminum plank profiles. SEAL BETWEEN FLOOR AND FRONT WALL Fixed seal between the floor and front wall by means of an aluminum profile and PVC seal. SIDE WALLS Side walls in smooth design, inside and outside. Double-walled side wall profiles 600 mm wide - 30 mm thick - 3 mm inside - 2 mm outside (grain version). The side wall profiles are continuously welded together on the inside. WEAR PLATES Wear plate in aluminum, rectangular, on the inside at the rear, 2000 (L) x 1500 (H) x 4 mm. TIPPER FLOOR SYSTEM CARGO FLOOR CF 500 SL-C Electric operation. 21 slat system. Drive segment consisting of 3 hydraulically double-acting cylinders with a working stroke of 200 mm. End plate at the rear made of stainless steel. OPERATION OF FLOOR SYSTEM Electric operation - electrically with remote control (original Cargo Floor). Loading - stop - unloading via switch. Manual emergency operation by means of a unique red Cargo rotary knob. TIPPER FLOOR FRAME Frame for wheelbase 7850 mm. 21 slats. FLOOR SLATS 21 aluminum slats - 8 mm ribbed with welded aluminum end caps. REAR DOOR 2 doors

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 02/2024, loading space length: 13,513 mm, loading space width: 2,475 mm, loading space height: 2,821 mm, loading space volume: 91 m³, total length: 14,000 mm, total width: 2,550 mm, Year of construction: 2024, Equipment: ABS, Chassis Type: Sliding Floor King Pin Load (National) (t): 12 Axle Load (National) (t): 8 Axle Distance (mm): 1310-1310 Saddle Height (mm): 1150 Loading Width (mm): 2475 Technical Permissible Total Weight: 39 = 12 + 9 + 9 + 9 Wheelbase (WB) Sliding Floor Trailer (mm): 7850 Internal Height Front (mm) (IHF): 2641 Internal Height Rear (mm) (IHB): 2821 Loading Length (mm): 13513 Volume (cbm): 91.3 Total Width (mm): 2550 Total Length (mm): 14000 Chassis Tire Size: 385/65R22.5 Chassis Neck Height (mm): 217 Brake Type: Disc Brake Brake Type: SAF SBS 2220 Offset (ET): 120 Option: 1st axle with optimized starting aid Activation of starting aid via button in the truck (button installation not included in the equipment scope) and by pressing the brake pedal three times Djdjzxvvvjpfx Akmjku Air Suspension: ECAS with lifting and lowering valve Lowering of air suspension via Smartboard, as well as lifting and lowering valve Coupling Head: Pneumatic European Palm Coupling Support Winches: Weweler as steel geared support winches, type Weweler, with compensating support winches, single-sided operation and 2 speed levels Operator Console: EBS operation on the left side in the direction of travel, behind the axles Position Operator Console: Sliding floor on the left side in the direction of travel, behind the axles. Toolbox on the left side in the direction of travel, behind the axles. Manufacturer Lighting: Aspöck Work Lights (operated via switch): 2 pieces LED reversing lights front in the direction of travel on the left and right, mounted in the area of the support winches Hydraulic Coupling: Swivel coupling size ?? Gender: Female Hydraulic Coupling: Return Swivel Coupling Size 1 Gender: Female Hydraulic Coupling: Hose 3,000 mm Hydraulic Coupling: Position Connection possibility on the front wall (also with connection possibility on the support legs) Type: Smartboard ECAS control box Aluminum access ladder 3.80 m on the right side in the direction of travel Broom and shovel holder on the side impact protection on the left side in the direction of travel Sliding Floor System: Manufacturer Cargo Floor Air and electrical console in the middle in the direction of travel with mounting brackets Protection of the lighting unit: One-piece mud flap Superstructure Inclination Front Wall (): 90 Inclination Rear Wall (): 90 Rear Wall Type: Swing Doors Cover Plate between Floor and Front Wall: Solid aluminum plate and PVC strips Profile Front Wall: 3 mm 2 mm in smooth design inside and outside, double-walled profiles 600 mm wide, 30 mm thick Operation of floor system: Radio remote control Cargofloor Control Type: CF 500 SL-C-?E?-Control 21 floor profiles 10 mm ribbed, residue-free discharge wall Aluminum with brushes Storage residue-free discharge wall: 6 wheels with bidirectional cleaning (loading floor) Design: swing door division ? to ?, with door closing cross member Door closing cross member in swiveling design, aluminum Locking Rear Doors: 1x turning rod / door half Additional locking rear wall: Pneumatic, single-acting Ramm Protection Rear Doors: Aluminum Ramp buffer over the entire width of the rear wall Tensioner for tarpaulin tensioning: Tensioner with handle, mounted on the underside / side wall of the superstructure Walkway on the front wall with access and bracket protection, mounted, design STAS aluminum walkway Position Access Walkway: Access ladder mounted on the left and right side in the direction of travel Step ladder in the rear end: Extendable step ladder, mounted

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 10/2023, next inspection (TÜV): 09/2026, loading space length: 10,149 mm, loading space width: 2,325 mm, loading space height: 2,285 mm, loading space volume: 55 m³, Year of construction: 2023, Equipment: ABS, ferroSTAR 54.9 cbm iron gray Chassis type: Z-chassis Axle distance (mm): 1310-1310 Fifth wheel height (mm): 1150 Chassis width (mm): 1400 Loading width (mm): 2325 Technically permissible total weight: 39 = 12 + 9 + 9 + 9 Interior height front (mm) (IHF): 2285 Interior height rear (mm) (IHB): 2285 Volume (m³): 54.9 Overall width (mm): 2550 Wheelbase (mm) (WB): 6600 Overall length (mm): 11520.836 Chassis material: Steel Tire dimension: 385/65R22.5 Loading length (mm): 10149 Axle manufacturer: SAF Axle version: Intra Brake version: Disc brake Brake type: SAF - SBS 2220 Offset (ET): 120 Option 1: Axle with lift axle and starting aid Activation of starting aid: via button in the truck (installation of the button is not included in the scope of supply) and by pressing the brake pedal three times Air suspension: ECAS with lifting and lowering valve Lowering of air suspension: Automatic lowering of the air suspension during tilting, can be manually locked via the Smartboard, as well as a switch on the chassis Coupling head: Pneumatic, European Palm coupling Djdpfxezmcn Us Akmsku Tire brand: Manufacturer's choice Rims: Steel Tire type: Regional Wheel nuts: Open Wheel nut caps: Plastic Outrigger supports: Aluminum drop-leg supports, mounted at the front of the chassis, with individual operation on both sides, supporting force 20t / pair Operation of underride protection: Manual Position of Smartboard: On the left side, in the direction of travel, in front of the axles Toolbox: On the left side, in the direction of travel, in front of the axles Spare wheel holder: On the right side, in the direction of travel, below the chassis Number of splash guards on the fender: 2 pieces Type of splash guard on the fender: Clear Pass Manufacturer of lighting: Aspöck Type of lighting: ECOLED II Work lights (operated via switch): Included Position of work lights (operated via switch): 2 LED reversing lights at the rear, on the left and right in the direction of travel, mounted on the lamp carrier Position of work lights (operated via switch): 2 LED reversing lights at the front, on the left and right in the direction of travel, mounted in the area of the outrigger supports Manufacturer of tilting cylinder: Hyva (STAS manufacturer's choice) Type of tilting cylinder: Hydraulic cylinder with small housing Cylinder tilting angle: Normal Model of tilting cylinder: Hyva - FC 169 Stroke of tilting cylinder: 7130 Hydraulic coupling: Swivel coupling Hydraulic coupling - Size: 1 Hydraulic coupling - Gender: Female Hydraulic coupling - Hose: 2,100 mm Type of Smartboard: ECAS control box Aluminum ladder: With 2.8 m length, mounted on the right in the direction of travel Broom and shovel holder: Included Position of broom and shovel holder: With 3 holders each, mounted on the chassis on the left in the direction of travel Position of broom and shovel holder: On the front wall, on the left in the direction of travel Load manometer: Ø 63 mm - mounted on the side of the instrument panel Splash guard for underride protection: Black with STAS logo, mounted across the entire width of the underride protection Mounting of splash guard for underride protection: Flexible Plastic support wedges: With two plastic support wedges including holder Air and electrical console: Mounted on the right in the direction of travel Rear wall type: Swing doors A-sign: Foldable on the rear wall, mounted on the right in the direction of travel Floor: Made of 6 mm HB450 Position of rubber supports: Mounted below the floor

Condition: used, 1-cylinder vertical stainless steel tank, used Capacity: 51.4 m³ Order no.: 4302 Material: V2A (stainless steel) Internal weld seams ground smooth Dimensions: 3,200 mm internal diameter Dsdsy Attpjpfx Akmoku 3,360 mm external diameter 6,000 mm cylindrical height 550 mm upper head 700 mm lower head 500 mm ground clearance Approx. 7,750 mm overall height Design: Cylindrical, vertical, mounted on 5 height-adjustable legs With conical heads Propeller agitator in bottom section of the cylinder 3.0 kW, 710 rpm Double jacket around 1/2 the cylinder and lower head, rated for 3 bar, 143 °C, 88 L Insulation around cylinder and lower head, cover fully welded in stainless steel Connections: 1 manhole 350 x 450 mm in cylinder Vent Ø 270 mm with hood in upper head Central spray head Filling line DN 40 Discharge DN 65, centered at bottom 1 DRD flange next to outlet and 2 sockets Connections for double jacket 1 inch Weight: approx. 4.3 t

Condition: used, maximum load weight: 33,910 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 11/2025, next inspection (TÜV): 11/2026, loading space length: 13,500 mm, loading space width: 2,475 mm, loading space height: 2,737 mm, loading space volume: 91 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2025, Equipment: ABS, 3-axle STAS Walking Floor Semi-trailer, 90 cbm First registered 11/2025 Dkjdpfoyih R Sjx Akmeu Internal dimensions (L x W x H): 13,500 x 2,475 x 2,641 / 2,752 mm Axle distance: 1,310 mm Unladen weight: 8,090 kg Saddle height: 1,150 to 1,200 mm Chassis made of steel, hot-dip galvanized SAF axles with large disc brakes, 430 mm, reinforced “CD” version WABCO trailer EBS with anti-roll system (RSS) WABCO Smartboard with axle load display 1st and 3rd axles are lift axles Air tank, aluminum Tire size: 6x 385/65 R 22.5 JOST full-load swivel saddle Lighting: ASPÖCK full-LED 4 x LED work lights Toolbox at the rear, on the left side Side walls with profile joints, completely welded on the inside CARGOFLOOR sliding floor with 21 slats, material thickness 10 mm, ribbed Control system with WIRELESS REMOTE CONTROL End plate at the rear made of stainless steel 3 load securing bars, reinforced version for waste transport Reinforced roof tarpaulin, Panama 900 g Cleaning door in the front wall Rear crossbar can be tilted and unlocked from below! Ideal for bale transport RENTING is the new BUYING, and with us, it is immediately available even in FULL-SERVICE RENTAL.

Condition: used, 4 tank containers made of stainless steel, used Contents: 35 cbm Order number: 4244 Material: 1.4404/1.4401 External dimensions: 7,820 mm length 2,438 mm width 2,591 mm height Operating data: according to type plate 1 container = -0.4/+4 bar operating pressure, 150 °C 1 container = -0.4/+3 bar operating pressure, 110 °C 1 container = +3 bar operating pressure, 120 °C 1 container = +4 bar operating pressure, 130 °C Design: cyl. horizontal container in a 20' transport frame with curved bottoms half pipe coil approx. 6.5 sqm heating surface, designed for 3 or 4 bar operating pressure 50 mm insulation around cylinder and bottoms connections: 2 domes DN 500 on the upper apex line and various connections outlet in the front weight: approx. 4.4 tons if required: frame for 4 tank containers made of painted mild steel, dismantled for transport Djdpfev Dtgaex Akmsku external dimensions: 9,173 mm length, 7,254 mm width, 6,124 mm height additional charge on request.

Condition: used, maximum load weight: 34,422 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 01/2024, next inspection (TÜV): 01/2027, loading space length: 10,149 mm, loading space width: 2,400 mm, loading space height: 2,285 mm, loading space volume: 55 m³, total length: 11,521 mm, total width: 2,550 mm, total height: 3,672 mm, Year of construction: 2024, Equipment: ABS, STAS 3-axle HardoX steel tipper, 55 cbm, "X-Shape" design First registered 01/2024, from first owner Delivered in Germany Mileage: 243,148 km Dimensions (L x W x H): 10,149 x 2,320/2,450 x 2,285 mm (tapered design in width) Unladen weight: only 7,578 kg Z-chassis, curved design Floor made of continuous 4 mm HardoX steel HB450 Front and side walls made of 3 mm HardoX steel HB450 Sloping front wall, with internal access steps 2-wing portal doors with PENDULUM FUNCTION/combination doors, pneumatic automatic release 2 grain slides with dust protection cover Reinforced roof cover HYVA tilting cylinder, Alpha type, suitable for high and low pressure ALU fifth wheel, full load capacity 2 air vibrators below the body SAF axles with large disc brakes, 430 mm 1st axle: LIFT AXLE with starting aid WABCO trailer EBS with roll-over protection RSS WABCO Smartboard Automatic tipping lowering Lifting and lowering mechanism Tires: 385/65 R 22.5 Dkedpfx Akjz I Hr Rjmju ALCOA aluminum rims, Dura-Bright, high-gloss finish Aluminum access ladder Shovel and broom holder Toolbox on the right 4 LED reversing lights RENTING is the new BUYING; with us, it is also immediately available in a FULL-SERVICE rental package.

Condition: new, overall weight: 36,000 kg, loading space volume: 68 m³, Year of construction: 2026, Equipment: ABS, ferroSTAR 68 cbm Silver-grey Chassis material: Steel Chassis type: Z-chassis Axle spacing (mm): 1310-1310 Fifth wheel height (mm): 1150 Dkodpfjz Exbrjx Akmsu Chassis width (mm): 1400 The widest chassis on the market with 1400 mm for maximum stability and safer handling. Load width (mm): 2325 Standard chassis: 110 Interior height, front (mm) (IHF): 2,460 Interior height, rear (mm) (IHB): 2,460 Load length (mm): 11744 Overall width (mm): 2550 Volume (m³): 68.00 Wheelbase (mm) (WB): 7,753 Overall length (mm): 13,128 Axles: SAF Axle version: Intra Brake version: Disc brake Brake type: SAF - SBS 2220 (Haldex) Offset (ET): 120 Option 1: 1st axle with lift axle and starting assist Starting assist activation: via button in the truck (button installation is not included in the scope of delivery) and by pressing the brake pedal three times. Option 3: 3rd axle with lift axle Brake pad wear indicator: connected Return-to-ride (RTR): 15 km/h Air spring protection plate ECAS air suspension with raising and lowering valve Automatic lowering of the air suspension during tilting, manually lockable via Smartboard, as well as switch on the chassis Coupling head: Pneumatic, European Palm coupling Control console: EBS control on the left side in the direction of travel, in front of the axles Standard: Smartboard Air and electrical console on the right side in the direction of travel Support winch: Type JOST MODUL Tires: Tire size 385/65R22.5 Tire pressure monitoring: Wabco OptiTire Rims: Alcoa Dura Bright TPMS sensor type: Rim-mounted sensor TPMS sensor supplier: ZF Wheel nut covers: Chrome-plated Lighting manufacturer: Aspöck Lighting type: ECOLED III - with STAS logo 2 LED reversing lights, rear, left and right in the direction of travel, mounted on the lamp carrier Position of work lights (operated via switch): 2 LED reversing lights in the front, left and right in the direction of travel, mounted in the area of the support winches Underrun protection Operation of underrun protection: manual Splash guard for underrun protection: Black with STAS logo Tilting cylinder: Hyva (STAS manufacturer choice) Type of tilting cylinder: Cylinder with small housing Tilting cylinder angle: Normal ±47° Tilting cylinder model: Hyva - FC 169 Stroke of tilting cylinder: 8130 Tilting cylinder max. PTO pressure: 250 Hydraulic coupling: Swivel coupling Hydraulic coupling - size: 1 Hydraulic coupling - gender: Female Hydraulic coupling - hose: 2,100 mm Number of splash guards on the fender: 2 pieces Toolbox Aluminum extension ladder with a length of 2.8 m, mounted on the right side in the direction of travel Broom and shovel holder with 3 holders each Load pressure gauge: Ø 100 mm Two plastic chock blocks Structure: Front wall inclination (°): 20 Rear wall inclination (°): 90 Front wall made of 3 mm HB450 Side wall made of 4/3 mm HB450 Floor made of 5 mm HB450 Position of rubber pads: mounted below the floor crossbeams Rear wall type: Hinged doors Rear wall made of 3 mm HB450 Number of hinges for rear wall: 3 pairs of door hinges Design of hinged door: 1/2 to 1/2 split, with 1 piece of latch Door wings open first on the right The open door wings are secured by a chain Seal for rear wall: with rubber seal in the lower area, extending 1,000 mm to the side Additional locking mechanism for rear wall: pneumatically double-acting Operation of the additional locking mechanism: manually via control on the side of the instrument panel Steel crossbars in trapezoidal design, foldable Number and positio

Condition: used, 4 cyl. upright stainless steel container, second-hand capacity: 56 cbm Order number: 4194 Material: V2A 1.4301 Dimensions: 2,800 mm diameter 9,000 mm cyl. height 450 mm top base 550 mm lower floor 580 mm ground clearance 10,580 mm approx. total height Design: cyl. upright on 8 steel legs with conical shelves designed for spec. weight 1.4 Connections: 1 manhole DN 600 in the cylinder 1 dome DN 600 in the upper base 2 x DN 125 in the upper base and 1 socket 2" Dedpfsu H U Rcex Akmoku DN 80 outlet at bottom center

Condition: used, maximum load weight: 33,707 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 09/2025, next inspection (TÜV): 09/2026, loading space length: 8,912 mm, loading space width: 2,400 mm, loading space height: 2,285 mm, loading space volume: 50 m³, total width: 2,550 mm, total height: 3,672 mm, Year of construction: 2025, Equipment: ABS, STAS 3-Axle Hardox Steel Tipper 50 cbm "EXTREME" Rock Tipper First registration: 09/2025, Condition: NEW Internal dimensions (LxWxH): 8,912 x 2,350/2,450 x 2,285 mm (tapered width design) Unladen weight: 8,293 kg Z-chassis, cranked design Continuous floor in 6 mm Hardox steel HB450 4 crusher bars evenly distributed along the entire length of the floor, fully welded Front wall and side walls made of 5 mm Hardox steel HB450 Slanted front wall, with internal access Deflector plates along the entire length of the side walls (to protect the mudguards) Hydraulic rear tailgate (with swinging function) HYVA tipping cylinder, type Alpha, suitable for high and low pressure Aluminium landing legs, full-load rated Dodpfx Aexriu Ejkmjku 2x pneumatic vibrators underneath the body SAF axles with large disc brakes, 430 mm 1st axle is a lift axle with start-assist WABCO Trailer EBS with roll stability support (RSS) WABCO Smartboard Automatic tipping lowering device Lifting and lowering device Tyres: 385/65 R 22.5 Aluminium access ladder Shovel and broom holder Toolbox on the right side 4x LED reversing lights RENTING is the new BUYING: also available for immediate full-service rental-----

Condition: used, 1-cylinder standing stainless steel tank, used Capacity: 20 cbm Order number: 4372 Material: V4A 1.4571 Dimensions: 2,850 mm internal diameter 3,050 mm external diameter 2,665 mm cylindrical height 582 mm top dished end 694 mm bottom dished end 510 mm ground clearance Approx. 4,451 mm total height Operating data: -0.1/+6 bar operating overpressure -10/+100 °C operating temperature with TÜV certificates Design: Cylindrical vertical tank on 4 pipe supports made of stainless steel with dished ends Designed for a specific gravity up to 1.3 Insulation around cylinder and bottom dished end, stainless steel cover, bolted Including stability certification Connections: 1 manway DN 600 in top dished end as well as 1 x DN 150 centrally 1 x DN 80 8 x DN 50 2 x DN 25 In the shell 1 x DN 25 Outlet DN 100 block flange, bottom center Dodsy Hgx Tepfx Akmoku Weight: approx. 3.6 t

Condition: used, 2 cylinder standing agitator tank made of stainless steel, used Contents: 50 cbm Order number: 3810 Material: 1.4401 in contact with product 1.4301 otherwise Inside weld seams ground to be food safe Dimensions: 3,000 mm internal diameter 3,100 mm external diameter 7,000 mm cylinder height 350 mm upper base 500 mm lower base 400 mm ground clearance 8,250 mm approx. total height Design: cylindrical standing on frame with conical bases Propeller agitator installed at an angle in the cylinder, 12 kW, 980 rpm. Double jacket on the cylinder, 2 circuits Dkodov Dthwopfx Akmju approx. 14 sqm, 76 liters each and on the lower floor, 1 circuit, approx. 5 sqm, 90 liters Operating overpressure 2 bar Insulation 50 mm PU foam around cylinder, upper floor and frame, stainless steel cover with manufacturer's certificate and material certificates Connections: 1 manhole 340 x 440 mm in the cylinder Ventilation Ø 300 with spray head in the upper floor Outlet bottom center DN 65 extended Weight: approx. 6.5 tons

Condition: used, 1 cylindrical, vertical stainless steel tank, used Capacity: 150 cbm Order number: 4326 Material: V2A Internal weld seams ground smooth for food contact Dimensions: 3,400 mm internal diameter 3,600 mm external diameter 16,500 mm cylindrical height 800 mm upper bottom Approx. 17,300 mm overall height Design: Cylindrical, vertical with a lower, inwardly curved conical bottom, supported by concrete with an upper conical bottom Propeller agitator in the cylinder at the bottom, installed at an angle, 15 kW, 960/min Insulation around the cylinder and upper bottom Cover completely welded Connections: 1 manhole 320 x 420 in the cylinder Vent Ø600 mm with hood in the upper bottom with a spray head, removable Condensate line drawn down laterally CIP line DN 65 drawn down laterally to operating height, tapering to DN 40 Dksdpfx Aksy Atvqomou 1 cable duct Ø25 drawn down to operating height as well as a measuring connection in the upper bottom 1 x measuring connection 1 x DRD flange 1 x sampling point in the cover Outlet at the lowest point DN 100

Condition: used, axle configuration: 3 axles, first registration: 09/2026, loading space length: 8,880 mm, loading space width: 2,475 mm, loading space height: 2,165 mm, loading space volume: 47 m³, total length: 10,259 mm, total width: 2,550 mm, total height: 2,165 mm, Year of construction: 2026, Equipment: * Chassis material: aluminium * Chassis type: V-chassis * King pin load National (t): 12 * Axle spacing (mm): 1310-1310 * Saddle height (mm): 1175 * Chassis width (mm): 1400 * Loading width (mm): 2475 * Chassis series: 080 * Internal height front (mm) (IHF): 2165 * Internal height rear (mm) (IHB): 2165 * Loading length (mm): 8880 * KC-Value: 0400 * Overall width (mm): 2550 * Volume (m³): 47.5824 * Wheelbase (mm) (WB): 5800 * Overall length (mm): 10259 * Chassis * Axles, brakes and suspension * SAF axles * Offset (ET): 120 * Option: 1st axle with lift axle and traction assist * Option: 3rd axle with lift axle and Optiturn * Activation of additional lift axle control via Wabco Smartboard * Brake pad wear indicator * Return-to-ride (RTR) 15 km/h * ECAS air suspension with lift and lower valve * Automatic lowering of air suspension during tipping, manually lockable via Smartboard and chassis switch * Pneumatic coupling head: European palm coupling * Control console: EBS operation on driver's side before the axles * Standard Smartboard * Air and electrical console, passenger side * Landing gears: Weweler steel gear landing gears, type Weweler, with compensating feet, one-sided operation, and 2-speed function * Tyre size: 385/65R22.5 * Tyre pressure monitoring: Wabco Trailerpulse * Rims: Alcoa Dura Bright * Tyre type: Regional application * TPMS sensor type: rim-mounted sensor * TPMS sensor included * Chrome wheel nut covers with STAS logo * Working lamp position (operated by switch): 2 LED reversing lights at the rear, left and right, mounted on the lamp bar * Working lamp position (operated by switch): 2 LED reversing lights at the front, left and right, mounted near the landing legs * LEDs in door end cross member: 2 x 3-function LED * Underrun protection: manual operation * Tow hooks: 2 pcs left and right * Mud flaps underrun protection: black with STAS logo * Cylinder tipping angle, normal: ±47° * Tipping cylinder model: Hyva - FC 169 * Tipping cylinder stroke: 6480 * Max. tipping cylinder pressure: 250 * Cylinder stage surface treatment: standard finish * Hydraulic coupling: rotary coupling * Hydraulic coupling size: 1 * Hydraulic coupling gender: female * Hydraulic coupling hose: 2,500 mm * Mudguard type: Domar STAS with white stripe * Number of mud flaps on mudguard: 2 pcs Djdpfx Akey Dmvajmeku * Mudguard mud flap type: asphalt * Toolbox: 860x520x500 * Aluminium ladder 3 m - passenger side * Broom and shovel holder * Ferry lashing rings * 2 lashing rings at the rear of the chassis * Two plastic wheel chocks * Retention device chassis to body: rubber buffer Body: * Front wall tilt (°): 20 * Rear wall tilt (°): 90 * Inner lower belt profile tilt (°): 45 * Front wall: 4 mm (aluminium) * Side wall profile: 3 mm - 2 mm * Floor: 8 mm aluminium - 110 Brinell * Rubber pads installed under floor crossmembers * Rear wall type: combination door * Combination door type: 2/3 - 1/3 with swiveling door cross member * Door leaf opening: right leaf opens first * Swiveling door end cross member * Hinge type: double door hinge * Slide gate: rectangular design * Slide gate position: 1 piece, centred * Grain outlet / dust bag: 1 grain funnel incl. dust bag * Smooth rear wall surface * Fastening of opened door leaves secured by chain * Rear wall gasket with standard rubber seal * Extra aluminium round profile

Condition: used, empty load weight: 7,390 kg, axle configuration: 3 axles, first registration: 09/2026, loading space length: 8,912 mm, loading space width: 2,325 mm, loading space height: 2,285 mm, loading space volume: 47 m³, total length: 10,289 mm, suspension: air, tire size: 385/65 R22,5, wheelbase: 4,490 mm, color: silver, Year of construction: 2025, mileage: 2,000 km, gearing type: mechanical, fuel consumption (urban): 1,028 l/100km, lifting height: 3,800 mm, Equipment: ABS, Unladen weight: 7390 kg, cargo space (L W H): 8,912 mm x 2,325 mm x 2,285 mm, tire size: 385/65 R22.5, cargo space volume: 47 m³, 1st axle: , 2nd axle: , 3rd axle: , air suspension, lift axle, electronic braking system EBS, grain conveyor, tarpaulin roof, aluminum rims, storage compartment, errors and changes excepted. Vehicle is sold on consignment. Vehicle location is in Steyr, Upper Austria. Vehicle is without registration – new vehicle. Dodez Awu Iepfx Akmeku

Condition: used, 1 cylindrical, upright stainless steel container, used Contents: 240 cbm Order number: 4228 Material: V2A 1.4301 Inside weld seams ground Dimensions: 4,200 mm overall diameter 21,500 mm approx. total height Design: cylindrical, upright with lower, inwardly curved base, with a slope to the outlet with upper conical base Propeller agitator in the cylinder below installed at an angle, 2.7 kW, 465/970 rpm. Insulation around the cylinder and upper base, V2A cover Connections: 1 manhole 350 x 450 in the cylinder Ventilation with hood in the upper base 2 spray heads various sleeves for sensors Outlet at the lowest point Djdpfxjv Dtdxs Akmeku Weight: approx. 15 tons

Condition: used, maximum load weight: 30,060 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2024, next inspection (TÜV): 06/2025, loading space length: 9,665 mm, loading space width: 2,475 mm, loading space height: 9,665 mm, loading space volume: 52 m³, Year of construction: 2024, Equipment: ABS, Kingpin load: National 12 t Axle load: National 8 t Axle spacing: 1310-1310 mm Fifth wheel height: 1150 mm Chassis width: 1400 mm Internal height: Front 2165 mm Internal height: Rear 2165 mm Overall width: 2550 mm Wheelbase: 6800 mm Overall length: 10656 mm Chassis material: Aluminum Tires: 385/65R22.5 Loading length: 9665 mm Axles: SAF Brake type: SAF - SBS 2220 Offset: 120 Option: 1st axle with lift axle and traction aid Activation of traction aid: Via a button in the truck (installation of the button is not included in the scope of delivery) and by pressing the brake pedal three times. Brake pad wear indicator: Not connected Tire pressure monitoring system (Tire Pilot) Without Tire pressure monitoring: Wabco Trailerpulse ECAS air suspension with raising and lowering valve Air suspension lowering: Automatic lowering of the air suspension during tipping, manually lockable via smartboard and switch on the chassis Pneumatic coupling head: European Palm coupling Chrome wheel nut caps with STAS logo Landing gear: Aluminum drop legs mounted at the front of the chassis, with individual controls on both sides, support force 20 t/P Underrun protection control: Manual Towing eye: 1x in the direction of travel Underrun protection mud flaps: Black with STAS logo Underrun protection cover: Handle on the underrun protection EBS control panel: Control panel: In the direction of travel, in front of the axles Toolbox position: On the left in the direction of travel, in front of the axles: Plastic Toolbox dimensions: Left in front of the axles: 860 x 520 x 500 Type of fender: Domar STAS with white line Number of mud flaps on the fender 2x Mudguard type: Clear Pass Lighting manufacturer: Aspöck Lighting type: ECOLED II Work lights (switch operated) Position of work lights (switch operated) 2x LED reversing lights, front, left and right, in the area of the landing gear Tilt cylinder manufacturer: Hyva Tilt cylinder type: Hydraulic cylinder with large casing Tilt cylinder model: Hyva - FC 169 Tilt cylinder stroke: 7130 Tilt cylinder max. pressure: 250 Surface treatment of cylinder stages: Standard surface treatment Hydraulic coupling: Swivel coupling Hydraulic coupling - size 1 Hydraulic coupling - gender: Female Hydraulic coupling - hose 2,500 mm Smartboard Aluminum leaning ladder 3 m Left-hand ladder attachment for rear entry: With hook for hanging Position of broom and shovel holder: With 3 holders each, on the chassis on the left in the direction of travel Loading pressure gauge Ø 100 mm - mounted on the front of the chassis With two Plastic wheel chocks including bracket Chassis safety device - body rubber pads Air and electrical console, centered in the direction of travel, with boom End wall inclination (°) 90 Rear wall inclination (°) 90 Rear wall type combi-door Inner lower chord profile inclination (°) 90 Floor 8 mm aluminum - 110 Brinell Position of rubber pads below the floor cross members End wall 4 mm (aluminum) Side wall profile 3 mm - 2 mm, smooth inside and outside, double-walled profiles 600 mm wide - 30 mm thick Rear wall aluminum Combi-door type 1/2 - 1/2 with pivoting door end cross member Door leaf opening: Right door leaf opens first (STAS manufacturer's choice) Door end cross member: Pivoting design Hinge type: With double door hinge (double-joint hinge) Slider: Rectangular design, standard Slider position 2 sliders with operating handles, one each on the left and right in the direction of travel. Dedpfx Akeuar Amjmoku Securing the open door leaves. The

Condition: new, axle configuration: 3 axles, loading space volume: 55 m³, Equipment: ABS, ferroSTAR 55 cbm Chassis material: Steel Chassis type: Z-chassis King pin load (national) (t): 12 Axle load (national) (t): 8 Axle track (mm): 1310-1310 Saddle height (mm): 1150 Chassis width (mm): 1400 The widest chassis on the market with 1400 mm for maximum stability and safer handling. Loading width (mm): 2325 Internal height at the front (mm) (IHF): 2,285 Internal height at the rear (mm) (IHB): 2,285 Loading length (mm): 10149 KC-Value: 0650 Overall width (mm): 2550 Volume (m³): 55.00 Wheelbase (mm) (WB): 6,600 Overall length (mm): 11,501 Axles: SAF Axle version: Intra Brake version: Disc brake Brake type: SAF - SBS 2220 (Haldex) Offset (ET): 120 Option 1: First axle with lift axle and starting assist Activation of starting assist via button in the truck (mounting of the button is not included in the scope of supply) and by pressing the brake pedal three times Option 3: Third axle with lift axle Brake pad wear indicator connected Return-to-ride (RTR): 15 km/h Air spring protection plate ECAS air suspension with raising and lowering valve Automatic lowering of the air suspension during tilting, manually lockable via Smartboard, and switch on the chassis Coupling head: Pneumatic, European Palm coupling Control console: EBS control on the left side, in the direction of travel, in front of the axles Standard: Smartboard Air and electrical console on the right side, in the direction of travel Support legs: JOST MODUL type Tire dimension: 385/65R22.5 Tire pressure monitoring: Wabco OptiTire Rims: Alcoa Dura Bright TPMS sensor type: Rim-mounted sensor TPMS sensor supplier: ZF Wheel nut covers: Chrome Lighting manufacturer: Aspöck Lighting type: ECOLED III - with STAS logo Rear lights: 2 LED reversing lights, mounted at the rear, on the left and right, on the lamp carrier Position: Work lights (operated via switch) 2 LED reversing lights at the front, on the left and right, in the area of the support legs Underbody protection: Manual operation Splash guards: Underbody protection, black with STAS logo Tilting cylinder: Hyva (STAS manufacturer's choice) Tilting cylinder type: Cylinder with small casing Cylinder tilting angle: Normal ±47° Tilting cylinder model: Hyva - FC 169 Tilting cylinder stroke: 7130 Tilting cylinder max. PTO pressure: 250 Hydraulic coupling: Rotary coupling Hydraulic coupling - size: 1 Hydraulic coupling - gender: Female Hydraulic coupling - hose: 2,100 mm Fenders: Domar STAS with white stripe Splash guards: Fender, Clear Pass Toolbox: On the left side, in front of the axles Aluminum extension ladder with a length of 2.8 m, mounted on the right side Position: Broom and shovel holder with 3 holders each, mounted on the chassis on the left side Load pressure gauge: Ø 100 mm - mounted at the front of the chassis Dodezdw Ttjpfx Akmoku Two plastic wheel chocks Locking device: Chassis - superstructure, rubber bumpers Front wall: Made of 3 mm HB450 Side wall: Made of 4/3 mm HB450 Floor: Made of 5 mm HB450 Position: Rubber pads attached under the floor crossbeams Rear wall type: Swing doors Rear wall: Made of 3 mm HB450 Number of hinges: Rear wall: 3 pairs of door hinges Design: Swing door, divided 1/2 to 1/2, with 1 piece of latch Opening of the door leaves: Right first opening Fastening of the open door leaves: Via chain Sealing: Rear wall with rubber sealing in the lower area, extending 1,000 mm to the side Additional locking: Rear wall, pneumatic

Condition: new, axle configuration: 3 axles, loading space length: 8,880 mm, loading space width: 2,475 mm, loading space height: 2,165 mm, loading space volume: 47 m³, total length: 10,259 mm, total width: 2,550 mm, total height: 2,165 mm, Year of construction: 2026, Equipment: ABS, Equipment: * Chassis material: Aluminum * Chassis type: V-chassis * Fifth wheel load National (t): 12 * Axle spacing (mm): 1310-1310 * Saddle height (mm): 1175 * Chassis width (mm): 1400 * Loading width (mm): 2475 * Chassis series: 080 * Internal height front (mm) (IHF): 2165 * Internal height rear (mm) (IHB): 2165 * Loading length (mm): 8880 * KC-Value: 0400 * Overall width (mm): 2550 * Volume (m³): 47.5824 * Wheelbase (mm) (WB): 5800 * Overall length (mm): 10259 * Chassis * Axles, brakes and suspension * Axles: SAF * Offset (ET): 120 * Option: 1st axle with lift axle and traction aid Dsdpfx Aey Dmvmjkmoku * Option: 3rd axle with lift axle and Optiturn * Activation of additional lift axle control via Wabco Smartboard * Brake pad wear indicator * Return-to-ride (RTR): 15 km/h * ECAS air suspension with lift and lower valve * Automatic lowering of air suspension during tipping, can be manually locked via Smartboard and switch on the chassis * Pneumatic coupling head: European palm-type coupling * Operation console: EBS controls on the left in direction of travel, ahead of the axles * Standard Smartboard * Air and electrical console on the right in direction of travel * Landing gears: Weweler steel gearbox-type landing gears with compensating feet, single-sided operation and 2-speed * Tire dimension: 385/65R22.5 * Tire pressure monitoring: Wabco TrailerPulse * Rims: Alcoa Dura-Bright * Tire type: Regional distance * TPMS sensor type: Rim-mounted sensor * TPMS sensor * Chrome lug nut covers with STAS logo * Work light position (operated by switch): 2 LED reversing lights at rear, left and right in direction of travel, mounted on lamp bracket * Work light position (operated by switch): 2 LED reversing lights at front, left and right in direction of travel, mounted at landing gear area * LEDs in door end cross member: 2 x 3-function LED * Underrun protection operated manually * Tow eyes: 2 each left and right * Splash guards on underrun protection: Black with STAS logo * Cylinder tipping angle normal ±47° * Tipping cylinder model: Hyva - FC 169 * Tipping cylinder stroke: 6480 * Tipping cylinder max. pressure: 250 bar * Cylinder stage surface treatment: Standard surface * Hydraulic coupling: Swivel coupling * Hydraulic coupling - size: 1 * Hydraulic coupling - gender: Female * Hydraulic coupling - hose: 2,500 mm * Mudguard type: Domar STAS with white stripe * Number of splash flaps on mudguard: 2 pcs * Mudguard splash flap type: Asphalt * Toolbox: 860x520x500 mm * Aluminum access ladder, 3 m - right side in direction of travel * Broom and shovel holder * Ferry lashing rings * 2 lashing eyes at rear of the chassis * Two plastic wheel chocks * Retention device chassis to body: rubber polyp Body: * Front wall angle (°): 20 * Rear wall angle (°): 90 * Inner lower belt profile angle (°): 45 * Front wall: 4 mm (aluminum) * Side wall profile: 3 mm - 2 mm * Floor: 8 mm ALU - 110 Brinell * Rubber pads installed below floor cross members * Rear wall: Kombi-door type * Kombi-door type: 2/3 - 1/3 with swiveling end cross member * Door wing opening: right wing opens first * End cross member of door: swiveling design * Hinge type: with double door joint * Slide: Rectangular design * Slide position: 1 piece in center * Grain discharge / dust bag: 1 piece grain chute incl. dust bag * Rear wall: smooth surface * Door wings secured open with chain

Condition: new, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,650 mm, loading space volume: 93 m³, Chassis Version with continuous chassis reinforced, new body manufactured in a self-supporting design with corresponding reinforcements in the lower flange for particularly high stability and strength, cross member 140 mm high reinforced version (for high ground loads) additional reinforcement as gusset plate in the front lower flange/vehicle frame area, chassis made of galvanized steel up to the support structure, (trailer construction max. 39,000 kg) Axles and suspension "Disc brake 22.5" Jost (DCA) axle units version, 3x9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard Infocenter, electronic brake wear indicator BVA-readable in the tractor unit (display), 1st axle with traction aid (new EC regulation, without tractor unit equipment), (on request against MP 1st + 3rd axle liftable) Tires and wheels 6 wheels with tires of size 385/65 R 22 .5 according to manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75?22.5 ET 120 Seatposts mechanical support winches with two speeds, 2x 20 ton support load with swivel foot, Braking system according to E.G. standard?EBS E-system Wabco with RSS system (roll stability support) and premium modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system, electrical system according to the guidelines of the EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint 3 integrated in the aluminum rear end, 24 volt system with 1?15 pin and 2x7 pin. Socket, with side clearance lights in LED design, 2 reflective panels on the rear, 2 white position lights at the front and 2 at the rear. red, 2 separate LED reversing lights integrated in the U-protection Structure/trough "structure fully welded inside" reinforced side walls, front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn Aluminum trough, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide completely welded with lower and upper belt, plank profiles fully welded inside, floor laid as a sliding floor system on 140 mm aluminum cross beams, floor forklift load approx. 9 ton/m2 cross beams mounted accordingly closely (approx. 350 mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in straight design, special aluminum corner profiles in beveled design, smooth rear wall in straight design with 2 aluminum wing doors 50/30 mm thick with 2 pivot rods Locks in the welded aluminum rear frame attached to Teflon bearings and stainless steel bearings, doors secured in the open position with a chain on each side, hard wear plates on the side walls approx. 2,000x1,500x4mm fully welded, running residual emptying wall with Kevlar tarpaulin approx. 1,800 mm long plus side with Kevl. -Plane sealing, service door in front wall with ladder turning inwards Hydraulic system "Cargo - Floor" sliding floor system Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE?HD sliders plus anti-lifting slide bearings, type CF 10 mm floor version, hydraulics with approx. 200 mm working stroke, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the sliding floor, electric. Rear left control with radio control integrated in a lockable waterproof box, without hydraulic hoses Dkodpfxsyh S Ais Akmeu Accessories 6 PV

Condition: new, maximum load weight: 28,240 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,480 mm, loading space height: 2,820 mm, loading space volume: 91 m³, Equipment: ABS, New vehicle in stock – available immediately! Buy, rent, or rent with an option to purchase! Side tarpaulin can be retrofitted at an extra cost! Stas 91 m² sliding floor / 10 mm flat floor / TÜV cargo certificate ----* Manufacturer: Stas * Type: BIOSTAR - Sliding floor * First registration: - (New vehicle) * Color: Chassis galvanized, body RAL 7016 silver-grey, tarpaulin SIO 7340 * Volume: approx. 91m³ (13.50m long x 2.475m wide x 2.64m to 2.82m high) * Total weight: 36,000 kg * Unladen weight according to vehicle registration: 7,760 kg * Payload: 28,240 kg * Axles: 3x SAF axles / 1 lifting axle / starting aid / disc brake * Tires: 385/65 R22.5 New on Speedline Diamond aluminum rims * Wheelbase: 7.85m * Suspension: ECAS air suspension with lifting and lowering * ABS / EBS * Cargo Floor CF 500 SL-C with remote control and control box at the rear left * 21 floorboards, 10mm flat * 12 pairs of recessed lashing eyes in the floor * End caps made of aluminum, welded * Complete discharge wall with brushes and stainless steel handles * Service door in the front wall * Double doors (50/50) with pneumatic locking * 2x twist locks for locking * Door closing crossbeam, swiveling * Hydraulic connections at the front with 3 m hoses and * Connection option below the body without hoses * Operating platform with ladder at the front left * Saddle height: 1150mm * Individual mudguards * Full load supports * Aluminum lighting protection at the rear (one-piece, foldable) * Roll tarp (900g/m²) with tension straps * Steel bars, foldable, and tension straps along the sides * 1x toolbox at the rear left * 1x aluminum ladder 3.80m long * Tire pressure gauge * Smartboard * TPMS tire pressure monitoring system * Aluminum bumper buffer at the rear * 1x extendable ladder at the rear right * 2x LED work lights in front of the axles * 2x LED reversing lights at the rear * 1x LED work light in the front wall inside * 2 x 3-function lamps at the top in the door crossbar Dedpfx Akev Emk Ujmjku New vehicle in stock – available immediately! Buy, rent, or rent with an option to purchase! Note on possible errors in the advertisement: Despite careful preparation of the advertisement, individual errors may have crept into the text or the information. We assume no liability for errors, changes or interim sales. All information is without guarantee. Please contact us to verify details or clarify any further questions.

Condition: used, axle configuration: 3 axles, first registration: 04/1996, suspension: air, tire size: 385/65 R22.5, color: other, Year of construction: 1996, Axle configuration Tyre size: 385/65 R22.5 Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Axle brand: BPW; Right tyre tread: 7 mm Rear axle 2: Axle brand: SAF; Left tyre tread: 5 mm; Right tyre tread: 6 mm Rear axle 3: Axle brand: SAF; Left tyre tread: 7 mm; Right tyre tread: 8 mm Weights Unladen weight: 7,220 kg Payload: 30,780 kg Gross vehicle weight: 38,000 kg Condition Dksdpfx Aozgm Dgjkmou Damage: none