Used Stationary Metal Analyzer for sale (41,726)

Year of construction: 2004, condition: used, functionality: unexamined, machine/vehicle number: 116996-04, Manufacturer: SPECTRO Analytical Instruments GmbH & Co. KG Type: SPECTROLAB F / LAVFC01A Nodszx Dwnepfx Ai Tewn Year of Manufacture: 2004 Project/Order No.: 16996/04 Lab No.: 116996-04 Stationary metal analysis instrument / OES spark spectrometer for copper alloys Stationary SPECTRO SPECTROLAB F metal analysis instrument for quantitative material analysis using optical emission spectrometry (OES/spark spectrometry). According to the available original documentation, the system is designed for the analysis of copper-based materials. The programs CU-00 for standardizing the Cu base, CU-20 for Cu/Zn alloys, and CU-70 for Cu/Al alloys are installed and documented. The spectrometer has three documented optics and measurement channels for numerous alloy elements and accompanying elements. Among others, it detects Cu, Zn, Pb, Sn, Al, Fe, Ni, Si, Mn, Mg, Cr, Co, Cd, Sb, P, and S. Extensive original documentation is available for the instrument, including test and photomultiplier protocols, configuration documents, standardization documents, and the operating manual for the Spark Analyzer Vision software. Various re-calibration/reference samples and accessories are also included. An existing analysis printout dated December 20, 2022, documents the practical use of the system for the analysis of CuZn40Pb2 materials. The printout shows measured values for numerous alloy and trace elements. Used condition with signs of wear and tear due to age and use. The instrument dates from 2004. Extensive instrument-specific documentation, accessories, and re-calibration/reference samples are available. The use and performance of material analyses are documented by existing analysis printouts from December 2022. Scope of delivery • SPECTRO SPECTROLAB F metal analysis instrument • Available re-calibration/reference samples • Various sample specimens and standards • Set of cables or available connection lines • Small parts and consumables • Adapter for small parts • Available boron nitride discs • Available SPECTRO accessories • Software/data carrier, including SPECTRO Data Backup • Documentation and test documents • Operating manual Spark Analyzer Vision • Documents for DIA 2000 / DIA2000SE • Photomultiplier test protocols • Configuration and standardization documents PC, monitor, and printer are listed in the original delivery documents. Measurement method: Optical emission spectrometry (OES) / Spark spectrometry Design: Stationary metal analysis instrument Readout system: MICRO 8 Calibration: Cu-base Applications: Cu-20 / Cu-70 Standardization: CU-00 – Cu-Base Installed programs: CU-00 – Standardization Cu-Base CU-20 – Cu/Zn alloys CU-70 – Cu/Al alloys Optical system: 1 × UV optic, documented with 6 lines 2 × Air optics, documented with 13 / 7 lines Optic 1: 3600 / 750 Optic 2: 3600 / 750 Optic 3: 2400 / 750 Monochromator: No Excitation source: 3000 / 300 Hz / Pure Ar Operating voltage: 230 V Mains frequency: 50 Hz Operating language: German Documented elements: Cu, Zn, Pb, Sn, Al, Fe, Ni, Si, Mn, Mg, Cr, Co, Cd, Sb, P, S Photomultiplier: predominantly R6350, individual UV channels R6351 according to test documents Software according to documentation: DIA 2000 Basis / DIA2000SE, Spark Analyzer Vision Spark Analyzer Vision manual: Version 09/2004 Documented software version: 1.40.0xx

Condition: used, Thermo Fisher Type: ARL easySpark metal analyzer Analysis: Tabletop spectrometer with PC, monitor, and software Thermo Scientific OXSAS 2.7 Software OXSAS is the most advanced software for optical emission spectrometers. Current analyses are displayed in tabs. Immediate processing of data sets using fill-down and increment-down tools. OXSAS is a multi-processing application with amazing capabilities and potential. The comprehensive functionality of OXSAS enables you to meet all your requirements. Technical machine description: Condition: fully functional In new condition Year of manufacture: Technical description of the system: The ARL easySpark metal analyzer is designed to meet the challenges and requirements of small to medium-sized facilities and laboratories in the metal industry that require high-quality, but cost-effective OES analysis for the production of parts for the automotive, aerospace, consumer goods, and other industries. The device is characterized by particularly high resolution thanks to a unique optical system based on a multi-grating/CCD (charge-coupled device) system. Other advantages of the Thermo Scientific ARL easySpark analyzer include: The ability to accurately analyze all elements, from trace amounts to percentages, in all metallic solid samples. A groundbreaking spark excitation and optical design to ensure the best performance in its class. An intuitive, user-friendly Thermo Scientific OXSAS analysis software for a quick learning curve and easy routine operation. Nodeziar Nspfx Ai Tjwn A robust and reliable design that requires minimal maintenance. Compliance with safety and quality guidelines. A simple design that is suitable for both new users in production and experienced laboratory personnel. The device is also ideally suited for other areas, such as metal recycling, academic and non-academic laboratories, and primary metal producers, where a cost-effective solution is needed for the analysis of metal products and materials for quality assurance and process control, or a second device is required. Power connection: 110-230 VAC, 50Hz or 60Hz Max. power: 600 VA Dimensions: Approx. L x H x D 0.80m x 0.45m x 0.70m Weight: Approx. 80 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Thermo Fisher Scientific Optical Emission Spectrometer / Spark Spectrometer Thermo Scientific ARL 3460 Professional OES metal analysis system for the precise analysis of metallic materials For sale is a used optical emission spectrometer from the manufacturer Thermo Electron Corporation (now Thermo Fisher Scientific). The Thermo Scientific ARL 3460 is suitable for fast and highly precise analysis of metallic materials in laboratories, foundries, quality assurance, incoming goods inspection, as well as research and development. The system operates according to the principle of optical emission spectrometry (OES) and is supplied including an industrial PC, original software, and a USB license dongle. Technical data: Manufacturer: Thermo Electron Corporation Model: ARL 3460 Device type: Optical Emission Spectrometer (OES) Made in Switzerland Supply voltage: 230 V AC Mains frequency: 50 Hz Mains connection: 1 phase Power consumption: 3.5 kVA Software: Thermo WinOE Version 3.2.3 MP1 Gateway v1.0-90 ASLViewer v1.0-16 ASLEngine v1.2-1 Original USB license dongle included Measurement method: Optical Emission Spectrometry (OES) Spark excitation for material analysis Fast and highly precise metal analysis Analyzable elements (according to the installed spectrometer configuration): Copper (Cu) Chromium (Cr) Iron (Fe) Manganese (Mn) Uranium (U) Niobium (Nb) Titanium (Ti) Zirconium (Zr) Phosphorus (P) Sulfur (S) Boron (B) Arsenic (As) Tin (Sn) Carbon (C) Aluminum (Al) Calcium (Ca) Molybdenum (Mo) Equipment: Thermo Scientific ARL 3460 spectral analyzer Dell industrial PC Monitor Keyboard Mouse Original WinOE software Original USB license dongle SERCAL MP-2000 rare gas purifier Connection cables Service markings present Accessories as shown in the pictures Application areas: Material analysis Metal analysis Quality assurance Incoming goods inspection Foundries Steel mills Metal processing Testing laboratory Research and development Automotive Mechanical engineering Industry Dimensions (approx.): Width: 1,665 mm, Depth: 910 mm, Height: 1,190 mm Weight: approx. 450 kg Scope of delivery: Thermo Scientific ARL 3460 Dell industrial PC Monitor Keyboard Mouse Original WinOE software Original USB license dongle SERCAL MP-2000 rare gas purifier Connection cables Accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures. Normal age-related signs of wear. Software starts correctly. Original USB license dongle included. Service and maintenance markings are present on the device. The table shown in the photos or other items not explicitly mentioned are not part of the sale. Nwsdjzkuftjpfx Ai Ton Loading by forklift is possible. Delivery by freight forwarder is possible. Subject to change, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, Z-conveyor, conveyor belt with metal slat belt GÖSSLING Metal belt conveyor, belt conveyor, stationary conveyor Machine No.: 15867 Year of manufacture: 2005 Usable length: 3100 mm Nsdswvv Rwjpfx Ai Tjwn Belt width: 400 mm Frame profile height: 70 mm Insertion width: 465 mm Lower insertion length: approx. 1500 mm Conveyor incline length: approx. 800 mm Upper discharge belt length: approx. 600 mm Height offset: approx. 170 mm Belt speed: approx. 22 m/min. Conveying height - discharge height: approx. 1220 to 1390 mm Insertion height: approx. 1050 to 1270 mm Belt drive motor output: approx. 0.37 kW Power supply: 400 Volt, 50 Hz - Metal slat chain made of stainless steel - Belt drive via NORD gear motor - Robust sheet steel construction - Height adjustable via hydraulic lift in the base - Mobile on fixed castors Required floor space L x W x H: 3160 x 750 x ... mm Weight: 420 kg Good condition

Year of construction: 2022, operating hours: 2,500 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: OWD/492/2022, Equipment: CE marking, For sale is a used Metal Technika OWD-1600 4m optimizer with very low operating hours, approximately 2500 hours. The machine is connected and ready for trials and tests. Net price. TECHNICAL SPECIFICATIONS Performance From 3,200 to 8,250 m/8 hours. Electronics: Controller with a color touchscreen display "MITSHUBISHI". Functions - Full optimization of 30 dimensions in two quality classes, - Creation of cutting programs for different customers, - Cutting at the marked location using a fluorescent pencil, - Trimming the margin (beginning and end of the input material) Nwedozdf Tpspfx Ai Ten - Cutting in batches (several pieces at once) - Meters counters: total, change, operator, monthly, - Cutting accuracy ±0.3 mm. Engine: 7.5 KW (saw Ø500 – 140 teeth) Width of input material 12 - 250 mm max. width/height (250 / 50 mm) Height of input material 12 - 120 mm max. height/width (120 / 120 mm) Length of input material up to 4,200 mm. Lubrication: Oil-based central lubrication system. Output automation Connection for a conveyor belt and a sorting table.

Condition: ready for operation (used), Year of construction: 2021, overall weight: 97 kg, travel distance X-axis: 300 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 200 mm, number of axes: 3, This 3-axis DESKTOP METAL Metal Studio 2 was manufactured in 2021. It utilizes Bound Metal Deposition technology and features a build volume of 300 x 200 x 200 mm. The machine supports various materials, including 316L and H13 Tool Steel, and operates with a dual extruder system. If you are looking to get high-quality metal 3D printing capabilities, consider the DESKTOP METAL Metal Studio 2 machine we have for sale. Contact us for further details. • Technology: Bound Metal Deposition (BMD) • Process: 2-step (printing and sintering – no debinder needed) • Build volume: 300 x 200 x 200 mm • Layer height: 50 µm to 250 µm • Build plate: Heated up to 120°C (vacuum-adhered) Nwjdpeyuyz Nsfx Ai Tsn • Extruders: Dual (metal and ceramic support) • Support interface: Ceramic release layer (manual breakaway) • Materials: 316L, 17-4 PH, 4140, H13 tool steel, copper • Software: Fabricate (automated scaling and sintering profiles) • Connectivity: WiFi / Ethernet Additional equipment • Furnace: Max temperature 1400°C; atmosphere: partial pressure Synthogas (Ar/H2); sintering cycle: 16–24 hours

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 260 mm, spindle bore: 80 mm, turning diameter: 460 mm, turning length: 1,000 mm, total length: 2,200 mm, total width: 1,080 mm, total height: 1,650 mm, spindle speed (max.): 1,700 rpm, spindle speed (min.): 25 rpm, bed width: 300 mm, overall weight: 1,655 kg, NEW DELIVERY – UNIVERSAL LATHE 460 × 1500 mm – BRAND NEW, IN STOCK, READY FOR IMMEDIATE DISPATCH New delivery just arrived: brand-new universal lathe with 3-axis digital readout, available immediately from our warehouse. Heavy cast-iron bed with hardened and precision-ground ways, 82 mm spindle bore, 5.5 kW main motor and 1500 mm turning length – a solid machine for production plants, maintenance departments, toolrooms and workshops. Key features • Turning length 1500 mm, spindle bore 82 mm • 3-axis digital readout with optical scales • 250 mm 3-jaw chuck • 5.5 kW main motor (S1 duty) • Removable bridge – turning up to 690 mm in the gap • Hardened and ground gears, 12 spindle speeds • Wide range of metric, inch, module and D.P. threads, lead screw and feed shaft Technical data Swing over bed: 460 mm Njdpfx Aij Af Uncj Tewn Swing over cross slide: 274 mm Swing in gap: 690 mm Maximum turning length: 1500 mm Bed width: 300 mm Spindle nose: D8 Spindle bore: 82 mm Spindle taper: Ø90 (1:20) Spindle speed: 25 – 2000 rpm, 12 speeds Maximum tool size: 25 × 25 mm Longitudinal feed range: 0.031 – 1.7 mm/rev (42 steps) Cross feed range: 0.014 – 0.784 mm/rev (42 steps) Metric threads: 0.1 – 14 mm (41) Inch threads: 2 – 112 T.P.I. (60) Diametral pitch threads: 4 – 112 D.P. Module threads: 0.1 – 7 M.P. Tailstock quill diameter: 60 mm Tailstock quill travel: 120 mm Tailstock taper: MT4 Top slide travel: 120 mm Cross slide travel: 290 mm Main motor power: 5.5 kW Coolant pump power: 0.09 kW Dimensions (L × W × H): 2720 × 1040 × 1340 mm Weight: 2080 kg Standard equipment • 3-axis digital readout with optical scales • 250 mm 3-jaw chuck • Set of six anti-vibration mounts • Fixed steady rest and travelling steady rest • Fixed centre MT4 • Change gear set • Coolant system with pump • LED work light • Lubricator, set of keys and tools • CE-compliant safety guards • Operating manual, CE declaration of conformity Condition and availability Brand new machine – new delivery, in stock in our warehouse, available immediately. Terms Price net (excl. VAT), EXW Sokołów Podlaski. 12 months warranty on parts. Documentation and manual included. Delivery to any European destination possible – transport quote on contact.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 39,807 h, functionality: fully functional, machine/vehicle number: 5347, clamping force: 6,500 kN, screw diameter: 85 mm, clearance between the columns: 920 mm, column diameter: 920 mm, injection pressure: 2,000 bar, injection weight: 2,600 g, ejector force: 180 N, ejector stroke: 250 mm, opening stroke: 920 mm, total length: 8,870 mm, total width: 2,100 mm, total height: 2,550 mm, overall weight: 32,500 kg, heating capacity: 39 kW (53.03 HP), power: 75 kW (101.97 HP), input voltage: 400 V, Equipment: documentation/manual, For sale is a PLASTIC METAL UNYKA 650 injection molding machine with a clamping force of 6,500 kN (650 tons). The machine is currently in operation and therefore in functional condition. It is available immediately. Technical data: Manufacturer: PLASTIC METAL S.p.A. Type: UNYKA 650 Year of manufacture: 2007 Clamping force: 6,500 kN (650 tons) Machine weight: approx. 32,500 kg Drive power: 75 kW Heating power: 39 kW EUROMAP: 6500H/4165 Serial number: 5347 The machine is currently still in production and can be inspected and demonstrated on-site after prior arrangement. Inspection is only possible after prior arrangement. Loading & Collection The machine can be loaded directly on-site after production ends. Loading with an overhead crane is possible. Sale without peripheral equipment. The machine is offered without peripheral equipment. Dismantling, transport, and further processing will be arranged. Nwjdpjzza Egofx Ai Ton Availability: immediately If you are interested or would like to arrange an inspection appointment, we look forward to receiving your inquiry.

Condition: good (used), Year of construction: 1993, Sheet metal storage system, Stopa, 491 storage locations for sheet metal 1.30 x 2.50m and 1.50m x 3m, – used: Price ex works: €65,000 (net), plus dismantling, etc. Manufacturer: Stopa Type: SLBS 3000 UL (Serial No. 93449) Year of manufacture: 1993 / Modifications in 2013 (Retrofit) and 2019 Storage height: 6,400mm Width (without attachments): Overall: 5.26m, Front: 5.17m Length: approx. 60m Sheet metal format Front: 1,300 x 2,500mm Sheet metal format Overall: 1,500 x 3,000mm Load capacity per pallet: 3,000kg Storage locations Front: 359 Storage locations Overall: 132 No existing cassettes: to be clarified 35 towers / bays Storage capacity: 1,473t Over the years, various punching/laser cutting machines have been connected to this storage system, i.e. machines with an interface to the storage system. Manual bending presses and deburring/grinding machines do not have an interface to the storage system. The loading and unloading stations are controlled via the storage management system and moved manually from the storage location to the desired position. 2013 > Retrofit modification: 4.1 Key aspects of this modification: 4.1.2 New main control panel with control computer 4.1.3 Data transmission to the stacker crane (RGB) via data light barrier 4.1.4 Lifting mechanism with two new Profi-Bus rotary encoders for height positioning, which monitor each other. 4.1.5 Encoder of the traverse for the telescopic fork was replaced with a Profibus-compatible rotary encoder 4.1.6 Control cabinet of the RGB was completely renewed 4.1.7 New circuit diagrams for the RGB and the I/O modules were created. 4.1.8 The safety technology was not changed 4.1.9 The speed of the axes (longitudinal travel, lifting mechanism, fork) was not changed. 4.1.10 The drives on the RGB and the controllers in the stationary RGB cabinet were converted to asynchronous servo motors with frequency converters. 5) 2015 > Connection of Trumpf L3030 to our distribution line 2 5.1.1 Key aspects of this modification: 5.1.2 Modification of station 4 and 6, loading and unloading side was swapped 5.1.3 Modification of safety interfaces of station 4 and 6 from 1 to 2-channel 5.1.4 Trumpf L3030 LiftMaster connection 6) 2017 > Order for Retrofit expansion concept, stage 1-3 6.1 Key aspects of expansion stages 1-3 (implemented by 08.2018) 6.1.2 Stage 1: Connection of the new TruLaser 3030 Loadmaster to VT 1 with modification of loading and unloading station 3 (Overall and Front) 6.1.3 Stage 2: Modification of the steel structure blocks from Front to Overall (28, 30, 32, 34, 36), relocation of stations 19 and 20 including update of the station control from Siemens S5 to S7 including 56 flat pallets Overall 6.1.4 Stage 3: Update of the station controls to Siemens S7 without VT1 and VT2 7) 2018 > Order for Retrofit expansion concept, stage 4-5 7.1 Key aspects of expansion stages 4-5 (planned implementation April – June 2019) 7.1.1 Stage 4: 7.1.2 Dismantling of the STOPA storage SBLS tower 1 and tower 2 (in-house work) 7.1.3 Modification of distribution line 1 and 2 7.1.4 New distribution trolley 1 7.1.5 New control for distribution line 1 and 2 7.1.6 Stage 5: Nwodpfxjz Tdywe Ai Tsn 7.1.7 New storage management software STOPA WMS 4.0 DYNAMIC The modification of expansion stages 4 – 5 will be carried out without any significant changes to the system and on the basis of the updated safety measures. Condition: good Available: immediately Location: Germany, NRW PDF plan available – we will gladly send it upon request!

Condition: used, Year of construction: 2007, functionality: fully functional, We offer a Magnetix metal magnet. Nodpfxjt Uyvro Ai Tswn Type: SWP80 Working width: 800 mm Year of manufacture: 2007

Condition: new, Year of construction: 2026, machine/vehicle number: MTP-BS260G-2026, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 260 mm, control type: manual, pivoting range: 60 °, actuation type: electric, rotational speed (max.): 72 rpm, rotational speed (min.): 36 rpm, total height: 1,900 mm, total length: 1,950 mm, total width: 750 mm, overall weight: 230 kg, Equipment: CE marking, documentation/manual, motor brake, rotational speed infinitely variable, OFFER OF THE WEEK – 5% DISCOUNT! MTP BS260G METAL BAND SAW PROFESSIONAL HORIZONTAL METAL BAND SAW WITH 0–60° SWIVEL CUTTING HEAD The brand-new MTP BS260G Metal Band Saw has been designed for precise cutting of carbon steel, stainless steel, acid-resistant steel, alloy steel, and non-ferrous metals. Thanks to its robust construction, hydraulic downfeed system, and high-quality blade guidance, it is an ideal solution for manufacturing plants, metal fabrication workshops, tool rooms, maintenance departments, and engineering companies. The swivel saw head allows precise cutting at any angle from 0° to 60°, providing excellent flexibility for a wide range of applications. The hydraulic downfeed system ensures smooth, accurate, and repeatable cutting performance. STANDARD EQUIPMENT • Integrated coolant system • Hydraulic cylinder with infinitely adjustable downfeed Njdpoyr Ndhefx Ai Tswn • Manual mechanical blade tensioning system • Carbide blade guides with precision bearings • Swivel cutting head (0°–60°) • Material clamping vice • Infinitely variable feed adjustment • Automatic blade drive shut-off after completing the cut • Technical documentation and operating manual • CE Declaration of Conformity KEY FEATURES • Precise mitre cutting from 0° to 60° • Heavy-duty cast iron saw frame for maximum rigidity • Two blade speeds: 36 and 72 m/min • High-precision carbide blade guidance for extended blade life • Hydraulic automatic downfeed system • Integrated coolant system for improved blade durability • Excellent cutting accuracy and surface finish • Ideal for cutting tubes, pipes, profiles, bars, and solid steel sections TECHNICAL SPECIFICATIONS • Machine type: Horizontal metal band saw • Cutting angle range: 0°–60° • Blade dimensions: 2455 × 27 × 0.9 mm • Blade speeds: 36 / 72 m/min • Feed rate: 0–50 m/min (infinitely variable) • Blade tensioning: Manual mechanical • Downfeed adjustment: Hydraulic, infinitely variable • Vice base height: 1010 mm • Main motor power: 1.1 kW • Power supply: 400 V / 50 Hz / 3-phase • Machine dimensions: 1950 × 750 × 1900 mm • Machine weight: 230 kg SAFETY The machine is equipped with blade guards, safety switches, and an automatic motor shut-off system that stops operation after the cutting cycle is completed or when a guard is opened. An additional safety feature automatically switches off the machine if the saw blade breaks. TECHNICAL SUPPORT We provide professional technical advice, warranty and after-sales service, as well as assistance in selecting the appropriate saw blades and cutting parameters. Transport can be arranged throughout Europe and worldwide. Brand-new machine supplied with a 12-month warranty, fully operational and ready for immediate use.

Condition: used, functionality: fully functional, Year of construction: 2014, power: 8 kW (10.88 HP), platform length: 4,100 mm, overall weight: 2,850 kg, transport length: 5,700 mm, transport width: 1,330 mm, transport height: 1,300 mm, construction height: 1,300 mm, Equipment: CE marking, The WORK SP 4000 CNC butt welding machine for plastic sheets is manufactured by the Czech company METAL WORKING CZ, s.r.o. It was produced in 2014, is in excellent condition, and comes with a spare Teflon coating. This is a high-tech industrial machine with CNC control, designed for the precise welding of thermoplastic sheets and panels. The main technical parameters and features of this machine series include: Main technical parameters: Maximum working width (welding length): 4000 mm, allowing for the processing of very large plastic sheets. Thickness of materials to be welded: Typically in the range of 2 mm to 25–30 mm (depending on the specific modification and type of plastic). Compatible materials: Thermoplastic sheets made of PE (polyethylene), PP (polypropylene), PVDF (polyvinylidene fluoride), and PVC (polyvinyl chloride). Welding type: Butt-welding with a heating element, using the heated element / hot plate welding method. Control and CNC functionality: Fully automatic cycle: The CNC control precisely manages all phases of the welding process: preheating, transfer time, welding pressure creation, and cooling time. Material database: A system with pre-set welding parameters according to international standards (e.g., DVS standards for welding plastics). Data logging: Automatic generation and recording of welding protocols for quality control (containing information on pressure, temperature, and cycle duration). Advantages of the design: High mechanical stability: A massive steel frame ensures even distribution of pressure along the entire length of the 4-meter sheet. Hydraulic system: Precise adjustment of the clamping force, guaranteeing a homogeneous weld seam without internal stresses. Nsdpfxozdiz No Ai Town Teflon coating: The heating element is equipped with a high-quality non-stick coating for easy cleaning and to prevent material burning. Length: 5700 mm Width: 1330 mm Height: 1300 mm Weight: 2850 kg Working length: 4100 mm Working height of the machine: 950 mm Minimum thickness of the plastic sheet: 4 mm Maximum thickness of the plastic sheet: 40 mm Machine power: 8 kW Operating voltage - electrical circuits: 3 PEN 50Hz 400/230V Air consumption: 0.8 m³/h Minimum pneumatic pressure: 0.8 MPa Maximum pneumatic pressure: 1.0 MPa Standard for electrical equipment: EN 60204-1 Applicable basic and technical standards: See Chapter 3.3 of the manual Maximum noise level at the workstation: 70 dB If you have any further questions or need more information, please send us a message or call.

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, Metal Technika OWD 1600 Optimizer - manufactured in Poland - year of production 2017 TECHNICAL PARAMETERS: - cutting width 250 mm - cutting height 120 mm - Capacity from 3 200 to 8 150 mb /8 h - sorting table with 5 knockouts - Electronics Controller with color touch screen display "MITSHUBISHI" - Features - full optimization of 30 dimensions in two quality classes, - creation of cutting programs for different customers, - cutting at the point of marking with fluorescent crayon, - margin cutting (beginning and end of the input material) - cutting in packages (several elements at once) - meters, total, shift, operator, monthly counters, - cutting accuracy ±0.2 mm - Motor 5.5 KW (saw Ø500 - 140z) - Width of input mat 12 - 250 mm max. width / height ( 250 / 50 mm) - Height of input mat 12 - 120 mm max. h/w ( 120 / 130 mm) - Input mat length up to 4,200 mm - Lubrication Oil central lubrication system - Automation at the output Connection for slant conveyor and sorting table Nwedpfxsrx Rxps Ai Tjn

Condition: excellent (used), Year of construction: 2014, operating hours: 2,200 h, functionality: fully functional, machine/vehicle number: 1000001927, travel distance X-axis: 3,210 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 200 mm, pressure: 3,800 bar, feed rate X-axis: 45 m/min, feed rate Y-axis: 45 m/min, feed rate Z-axis: 15 m/min, INTERMAC PRIMUS 322 METAL – 5-AXIS WATERJET – YEAR 2014 Approximately 2,200 operating hours | Working area 3,210 × 2,000 mm | BFT Ecotron 38.22 pump | 3,800 bar B&B Waterjet Abrasive offers for sale a used Intermac Primus 322 Metal 5-axis waterjet cutting system, year 2014, complete with a 22 kW BFT Ecotron 38.22 high-pressure pump. The machine is in excellent condition and was disassembled while in working order. It is currently disassembled at our Onara di Tombolo (PD) location, where it can be viewed by appointment. A functional test is not available in its current state. The 5-axis configuration allows for machining with an inclined head, offering greater versatility compared to vertical cutting alone. TECHNICAL DATA • Manufacturer: Intermac / Biesse • Model: Primus 322 Metal – Waterjet • Year of manufacture: 2014 • Configuration: 5 axes, X / Y / Z / A / C • Machine operating hours: approximately 2,200 • Working area X/Y: 3,210 × 2,000 mm • Z-axis travel: 200 mm • A-axis tilt: ±60° • C-axis: continuous rotation • Maximum axis speeds X/Y/Z: 45 / 45 / 15 m/min (not cutting speed) • Allowable load on the table: 1,000 kg/m² HIGH-PRESSURE PUMP • BFT Ecotron 38.22 • Pump motor power: 22 kW • Maximum pressure: 3,800 bar • Maximum flow rate: 2.3 l/min • Pump power supply: three-phase, 400 V, 50 Hz APPLICATIONS Abrasive waterjet cutting of metals, including steel, stainless steel, aluminum, copper, brass, and titanium, as well as stone, ceramics, and non-tempered glass. Thicknesses, speeds, and achievable quality depend on the material and processing parameters. Nwjdpfx Ais Aduy Io Tjn REQUESTED PRICE: €50,000 + VAT The price includes the machine and the BFT Ecotron 38.22 pump. Transport, installation, commissioning, training, and other ancillary services are excluded and can be quoted separately depending on the destination and the customer's requirements. B&B WATERJET ABRASIVE: YOUR WATERJET PARTNER With over 17 years of experience in the industry, we support the customer from the selection of the system to its daily management. We can assist with installation and commissioning, operator training, technical assistance, and maintenance, as well as the supply of spare parts and abrasives. A single point of contact to guide you through the purchase and support you over time. To receive more information, arrange a visit, or request a quote including the necessary services, please contact us, indicating the installation location and your production requirements. B&B Waterjet Abrasive

Condition: used, Desktop Metal Desktop Metal 3D Printer Complete System 3D Metal Printer Studio System from Desktop Metal Complete system: 3D printer + debinding machine + sintering furnace Desktop Metal The three-part solution includes a 3D printer, debinder, and furnace. Manufacturer: Desktop Metal Model: Desktop Metal Studio System Operating condition: Used (Good) Year of manufacture: 2019 Includes: Bound Metal Deposition (BMD) technology Features: Printed materials: Metal Technology: FDM Application: Industrial Other features: Office X-axis travel: 30 cm (12 in) Y-axis travel: 20 cm (8 in) Z-axis travel: 20 cm (8 in) Description: In contrast to laser-based systems that selectively melt metal powder, the printer extrudes bound metal rods – similar to an FDM printer. This eliminates the safety requirements often associated with 3D metal printing, and enables new features such as the use of closed-cell fillings for lightweight strength. Desktop Metal Studio Debinder (Delamination machine) Fully automatic debinding Cleaning tank: 17.4 L (in process) / 22.5 L (storage) Description: The debinder prepares green parts by dissolving the primary binder for sintering. With a low-emission design, it requires no external ventilation and is safe for an office environment. Automatic liquid distillation and recycling mean that no refilling is required between cycles. Desktop Metal Studio Sinter Furnace Hybrid technology (microwave & conventional heating elements) Nwedpozd Tllefx Ai Tjn Build volume: 305x205x205 mm Carbon housing Gas supply: 2 x 900 L gas cylinders Heating power: 20 kW Function: Sintering Configuration: Chamber Heat source: Gas Other features: High temperature, automatic Maximum temperature: 1,400 °C (2,552 °F) Description: Fully automated and sized to fit through an office door, the furnace delivers industrial-grade sintering in an office-friendly package. Built-in temperature profiles, tailored to each design and material, ensure uniform heating and cooling without the residual stresses that occur in laser-based systems. Condition: used Scope of delivery: (See image) (Changes and errors in technical data, information is subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, saw blade diameter: 450 mm, cutting height (max.): 100 mm, cutting width (max.): 200 mm, type of input current: three-phase, year of last overhaul: 2025, For sale: Metal Technika OWD-1600 Optimizing Saw / Cross-cut Saw, year of manufacture 2018. Nsdpsyv Ewmofx Ai Tswn The machine is fully operational, ready for immediate use – ideal for fast cutting of components in serial production. A major advantage of this machine is its ability to set a cutting schedule for up to 8 positions: you simply set the dimension and the quantity, and the machine automatically performs cutting and proceeds to the next positions without the need for tool changes. Technical Data: Model: Metal Technika OWD-1600 Year of manufacture: 2018 Maximum material width: 200 mm Maximum material height: 100 mm Maximum board length: 3200 mm Feed speed: approx. 30 m/min Saw blade diameter: min. 400 mm / max. 500 mm Motor speed: 2800 rpm Spindle speed: approx. 6000 rpm Power supply: 3x 400V Power: 7 kW Medium: air 6–7 bar Weight: approx. 1500 kg Performance: The machine operates efficiently – for example: - Batch of 8 boards, 12 mm thick each - Board length: 2800 mm - Cutting into 3 elements (approx. 700 mm) - Cycle time: about 10 seconds The machine can be inspected and tested on site. Location: Elbląg / Warmińsko-Mazurskie, Poland For further questions, please contact me.

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 460 kg, total width: 610 mm, total length: 1,850 mm, total height: 1,590 mm, SHEET METAL BEADING MACHINE ETB 40 – METAL TECHNICS POLSKA PROFESSIONAL SHEET METAL BEADING MACHINE The ETB 40 Sheet Metal Beading Machine is a robust and efficient machine designed for producing beads, grooves, flanges, reinforcing ribs, and other forming operations in sheet metal. Thanks to its heavy-duty construction, high precision, and a wide range of interchangeable forming rolls, it is ideal for metal fabrication workshops, HVAC duct production, sheet metal processing, and general industrial manufacturing. The machine enables fast and accurate production of repeatable profiles, improving productivity while maintaining excellent quality. KEY FEATURES • Maximum sheet thickness: 4 mm • Powerful 2.2 kW electric motor • Heavy-duty steel construction • 300 mm throat depth • Precise material guidance • Suitable for a wide variety of beading and flanging operations • Quick and easy roll replacement • Ideal for HVAC, tanks, enclosures, and steel fabrication • High manufacturing quality • Machine available from stock TECHNICAL SPECIFICATIONS • Model: ETB 40 • Maximum sheet thickness: 4 mm • Roller width: 165 mm Nedpfjzkubzjx Ai Tswn • Throat depth: 300 mm • Roller speed: 15.3 rpm • Motor power: 2.2 kW • Dimensions (L × W × H): 1850 × 610 × 1590 mm • Weight: 460 kg APPLICATIONS The ETB 40 is ideal for manufacturing: • HVAC ducts and fittings • Air-conditioning components • Cylinders and tanks • Machine enclosures • Decorative sheet metal components • Flanges, reinforcing beads and stiffening profiles • Components for the automotive and steel fabrication industries HEAVY-DUTY CONSTRUCTION The machine is built on a rigid welded steel frame, ensuring excellent stability, high precision, and long service life even under intensive industrial use. EASY OPERATION The ergonomic design and intuitive controls allow fast roll changes and quick machine setup for different forming operations. This makes the ETB 40 suitable for both small workshops and high-volume production. TRANSPORT & TECHNICAL SUPPORT We organize machine transportation throughout Europe as well as to countries outside the European Union. Every transport quotation is prepared individually based on the delivery destination. We provide professional technical advice, warranty and after-sales service, and ongoing technical support from our specialists. Customers are also welcome to collect the machine directly from our warehouse in Sokołów Podlaski, Poland. WHY CHOOSE METAL TECHNICS POLSKA? For many years, Metal Technics Polska has been supplying high-quality metalworking machinery to customers across Europe. We provide complete support—from technical consultation and machine selection to transportation, commissioning, and long-term after-sales service. If you would like to receive a quotation or learn more about this machine, please contact our sales team. Visit the Metal Technics Polska website to explore our complete range of sheet metal working machines and discover our latest products and promotions.

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, grinding length: 800 mm, grinding width: 400 mm, total height: 1,850 mm, total length: 1,960 mm, total width: 1,480 mm, feed length X-axis: 800 mm, feed length Y-axis: 415 mm, workpiece weight (max.): 500 kg, feed rate Z-axis: 360 m/min, grinding wheel diameter: 350 mm, distance table to spindle center: 520 mm, table length: 800 mm, table load: 500 kg, type of input current: three-phase, table width: 400 mm, grinding wheel width: 30 mm, spindle speed (max.): 2,800 rpm, overall weight: 1,800 kg, grinding spindle motor power: 4 W, SURFACE GRINDER SP-4080AHR • Rapid vertical feed to the workpiece • Coolant tank with magnetic filter • Digital readouts on 2 axes • Free-standing hydraulic unit with heat exchanger • Longitudinal and cross guides hardened and ground • Table with longitudinal flat guide and cross triangular guide • Electromagnetic chuck • Balancing arbor • Grinding wheel flange • Accessibility for operators with disabilities • Grinding wheel with holder • Wheel dresser • Cooling system • Central lubrication system • Work area lighting • Set of basic adjustment tools • Table cover • Leveling bolts and washers • User manual in Polish • CE Declaration of Conformity Working table size mm 400x800 T-slots (number x width) pcs/mm 1/14 Nodey Sgdgjpfx Ai Tjwn Max. longitudinal travel mm 800 Cross travel mm 415 Max. distance from spindle axis to table mm 520 Longitudinal feed of working table mm/min 3-20 Table feed Automatic mm/min 0-8 Rapid mm/min 600 Manual / per graduation mm/graduation 0.01 Manual / per revolution mm/rev 2 Vertical feed of spindle head Automatic mm/min none Rapid mm/min 360 Manual / per graduation mm/graduation 0.01 Manual / per revolution mm/rev 2 Grinding wheel Rotational speed rev/min 2800 Size mm 350x30x127 Grinding accuracy mm 300/0.005 Surface finish Ra 0.32 Spindle motor power kW 4.0 Cross feed motor power kW 0.04 Max. working table load kg 500 Overall dimensions (LxWxH) mm 1960x1480x1850 Gross weight kg 1800

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 260 mm, spindle bore: 80 mm, turning diameter: 460 mm, turning length: 1,000 mm, total length: 2,200 mm, total width: 1,080 mm, total height: 1,650 mm, spindle speed (max.): 1,700 rpm, spindle speed (min.): 25 rpm, bed width: 300 mm, overall weight: 1,655 kg, NEW DELIVERY – UNIVERSAL LATHE 460 × 1000 mm – BRAND NEW, IN STOCK, READY FOR IMMEDIATE DISPATCH New delivery just arrived: brand-new universal lathe with 3-axis digital readout, available immediately from our warehouse. Heavy cast-iron bed with hardened and precision-ground ways, 80 mm spindle bore, 5.5 kW main motor and 1000 mm turning length – a solid machine for production plants, maintenance departments, toolrooms and workshops. Key features • Turning length 1000 mm, spindle bore 80 mm • 3-axis digital readout with optical scales • 250 mm 3-jaw chuck • 5.5 kW main motor (S1 duty) • Removable bridge – turning up to 690 mm in the gap • Hardened and ground gears, 12 spindle speeds • Wide range of metric, inch, module and D.P. threads, lead screw and feed shaft Technical data Njdpfxj Abbgvo Ai Tewn Swing over bed: 460 mm Swing over cross slide: 260 mm Swing in gap: 690 mm Maximum turning length: 1000 mm Bed width: 300 mm Spindle nose: D1-8 CAMLOCK Spindle bore: 80 mm Spindle taper: MT7 Spindle speed: 25 – 1700 rpm, 12 speeds Maximum tool size: 25 × 25 mm Longitudinal feed range: 0.031 – 1.7 mm/rev (42 steps) Cross feed range: 0.014 – 0.784 mm/rev (42 steps) Metric threads: 0.1 – 14 mm (41) Inch threads: 2 – 112 T.P.I. (60) Diametral pitch threads: 4 – 112 D.P. Module threads: 0.1 – 7 M.P. Tailstock quill diameter: 60 mm Tailstock quill travel: 130 mm Tailstock taper: MT4 Top slide travel: 125 mm Cross slide travel: 295 mm Longitudinal travel: 750 mm Maximum length of installed part: 900 mm Main motor power: 5.5 kW Coolant pump power: 0.1 kW Dimensions (L × W × H): 2200 × 1080 × 1650 mm Weight: 1655 kg Standard equipment • 3-axis digital readout with optical scales • 250 mm 3-jaw chuck • Set of six anti-vibration mounts • Fixed steady rest and travelling steady rest • Fixed centre MT4, reducing sleeve MT7/MT4 • Change gear set • Coolant system with pump • LED work light • Lubricator, set of keys and tools • CE-compliant safety guards • Operating manual, CE declaration of conformity Condition and availability Brand new machine – new delivery, in stock in our warehouse, available immediately. Terms Price net (excl. VAT), EXW Sokołów Podlaski. 12 months warranty on parts. Documentation and manual included. Delivery to any European destination possible – transport quote on contact.

Condition: new, functionality: fully functional, Year of construction: 2026, CONSTMACH FIXED 30 is a fully automatic stationary concrete plant specifically designed for medium-scale or long-term ready-mix concrete projects. Manufactured in compliance with CE standards, this plant is one of the top choices for professional users due to its high durability, long-lasting structure, and low maintenance requirements. Its ability to produce all types of concrete in precise proportions provides a comprehensive solution for the wide range of needs in the construction industry. Depending on the type of concrete to be produced in the FIXED 30 model, pan, single-shaft, twin-shaft, or planetary mixer options can be used. The system, which can be equipped with cement silos with capacities ranging from 50 to 500 tons depending on the project scale, facilitates the easy filling of bagged cement with optional blast bunker integration. It also features a customizable design for different climatic conditions; it can be heated with a steam generator and insulation system in cold regions, while cooling systems maintain the optimum concrete temperature in hot climates. Pre-feeding systems that eliminate the need for aggregate feeding ramps increase operational efficiency, while a bucket transport system can be preferred in sites with limited space, allowing for flexible layout plans. Stationary-30 Fixed Concrete Plant Technical Specifications Production Capacity: 30 m³/h Weight: 38 tons (excluding cement silo) Total Motor Power: 125 kW Electric Generator Requirement: 200 kVA Mixer Options: Pan – Single Shaft – Twin Shaft – Planetary Working Area Requirement: 700 m² Aggregate Storage Bunker: 4 x 20 m³ Aggregate Weighing Bunker: 1.5 m³ Aggregate Transfer Belt: 800 x 22,000 mm Mixer Wet Concrete Volume: 1 m³ Cement Weighing Bunker: 600 kg Water Weighing Bin: 300 liters Additive Weighing Bin: 30 liters Air Compressor: 500 liters, 5.5 kW Cement Silo Capacity: 50 – 500 tons Nsdpfx Aioxpfuis Town Control Type: Fully Automatic What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: ready for operation (used), Year of construction: 2019, HEUFT ONE: Metal Detection and Code Verification Conveyor System Model Heuft HBBNXZ72 YOM 2019 High sensitivity to ferrous and non-ferrous metals Stainless Steel Construction Full Container Checking System (A4) The devices of the new HEUFT ONE series set new standards in terms of detection accuracy, operational reliability and price / performance ratio during an in-line quality inspection in a confined space, and celebrated their world premiere at interpack. The first metal detector and an inspection system for markings up to HEUFT standards can be experienced live at the trade fair. ONE for all: the new products make an affordable introduction to HEUFT cutting edge technology as particularly compact stand-alone devices which are extremely easy to integrate into packaging lines. They combine innovative detection technologies with customised hardware and software and proven procedures for a highly precise product tracking, inspection and fault rejection. Thus the compact complete solutions remove contaminated products and incorrectly marked packaging accurately; food safety has priority! The HEUFT ONE for detecting metal achieves maximum detection accuracy with unique evaluation procedures from the HEUFT development department: it even finds minute pieces of metal in filled food packaging reliably – almost unaffected by the product effect of saline or acidic products and the influence of metal packaging components. Even special ambient conditions such as a "metal free zone" are not necessary for the reliable operation of the compact stand-alone device. The first HEUFT metal detector complements the portfolio of sophisticated systems, which identify all types of foreign objects, with a slim entry-level solution. It is ideal for all those who only wish to find objects made of iron, steel, aluminium or stainless steel first and want to achieve a detection and rejection reliability up to HEUFT standards. Njdpfxeyq Rkyj Ai Tswn The new HEUFT ONE for code verification, marking and dress inspection also provides this during the high-resolution complete examination of food packaging with in-house developed colour sensor camera technology and real-time image evaluation. It detects best before and expiry dates, barcodes and 2D codes, article and serial numbers, imprints and lettering which have been incorrectly applied and are inaccurate as regards content – and that independent of their respective position. The same also applies to deviating logos as well as non-brand colouring and design elements. Proven HEUFT procedures also ensure the accurate removal of incorrectly marked products in this case. Full traceability, clear information about shelf-life and digestibility as well as an attractive appearance at the point of sale are thus always guaranteed. The solid, extremely compact construction in accordance with the hygiene-optimised HEUFT CleanDesign also makes the new HEUFT ONE devices stand out. They are straightforward to integrate into existing packaging lines even where space is limited. The HEUFT ISI bus ensures minimum wiring with the open, flexible assembly directly above the conveyor. Dispensing with change parts makes easy brand changes without mechanical changeovers possible and the organised user interface, which has been reduced to the essentials, ensures error-free operation. This together with continuous monitoring brings the metal detection and code verification in line with HEUFT standards.

Condition: good (used), Fixed speed380 Volt Njdpfoz Rftaex Ai Tswn More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: excellent (used), Year of construction: 2016, Loma Systems Metal Detector with Rejector Model: IQ³ Model conveyor: MD Conveyor, serial number: G7B3C2RS-35150D Year of construction: 2016 220-240 V, 1 Ph, 50/60 Hz, 3 A Belt width: 300 mm, clearance: 350 mm x 150 mm Total dimensions: 2020 mm x 1080 mm x 1120 mm Nodev T Ah Ejpfx Ai Tswn

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 570 mm, spindle bore: 105 mm, turning diameter: 800 mm, turning diameter over bed slide: 800 mm, center height in crank: 517 mm, center width: 400 mm, turning length: 1,500 mm, feed length X-axis: 420 mm, feed length Z-axis: 230 mm, quill diameter: 90 mm, quill travel distance: 235 mm, total length: 3,240 mm, total width: 1,140 mm, total height: 1,910 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 25 rpm, bed width: 400 mm, Turning diameter in gap: 105 mm, rotational speed (max.): 1,600 rpm, rotational speed (min.): 25 rpm, type of input current: three-phase, swing diameter over bed slide: 570 mm, overall weight: 2,600 kg, MTP CQ6280 Lathe 800 × 1500 – Ø105 mm Spindle Bore – 7.5 kW – 3-Axis DRO Metal Technics Polska is a manufacturer and importer of professional metalworking machinery. We supply proven technologies from Poland, Europe and Asia to companies throughout Europe and have focused on quality, precision and reliability for 15 years. The MTP CQ6280 is a heavy-duty universal lathe designed for machining shafts, tapers, spherical surfaces and internal and external threads using turning tools, drills and threading tools. With a swing over bed of 800 mm, a turning length of 1500 mm and a Ø105 mm spindle bore, it is ideally suited for professional workshops and industrial production. TECHNICAL DATA • Maximum turning length: 1500 mm • Swing over bed: 800 mm • Swing over cross slide: 570 mm • Swing in gap: 1035 mm (gap length 330 mm) • Bed width: 400 mm • Z-axis travel: 230 mm • X-axis travel: 420 mm • Tool post swivel range: 70° • Spindle speed: 25–1600 rpm (16 speeds) • Spindle bore: 105 mm • Spindle nose: D1-8 • Spindle taper: MT5 • X-axis feed: 0.022–0.74 mm/rev (25 steps) • Z-axis feed: 0.044–1.48 mm/rev (25 steps) • Tailstock quill: Ø90 mm, MT5, 235 mm travel • Tailstock adjustment: 11 mm • Metric threads: 0.45–120 mm (54) • Module threads: 0.25–60 mm (46) • Whitworth threads: 7/16–80 TPI (54) • Diametral Pitch threads: 0.88–160 DP (42) • Main motor power: 7.5 kW • Power supply: 400 V • Dimensions (L × W × H): 3240 × 1140 × 1910 mm • Weight: 2600 kg STANDARD EQUIPMENT • 3-axis digital readout (DRO) • 3-jaw chuck Ø320 mm • 4-jaw chuck Ø400 mm Nodpfx Aioyzzghs Tjwn • Faceplate Ø450 mm • Driving plate • Fixed steady rest, max. Ø250 mm • Travelling steady rest • Chuck guard and splash guard • Coolant system • Reduction sleeves • Fixed centre • Tool set DELIVERY, WARRANTY & SERVICE Delivery can be organised to any destination in Europe. The machine is supplied with a 12-month warranty on parts, with technical service and support available throughout Europe.

Condition: new, functionality: fully functional, fuel type: electric, color: other, Year of construction: 2026, At FABO, we design and install stationary type stone crushing and screening plants tailored to meet our customers’ specific requirements. The production capacity of our stationary plants varies between 100 and 1000 tons per hour. Crushing & Screening Plant with 250–350 TPH Capacity: • TBX-35 / Vibrating Feeder Bunker – 1 unit • TE-1430 / Intermediate Screen (1400x3000 mm – 2 decks) – 1 unit • PDK-130 / Primary Impact Crusher – 1 unit • TE-2060 / Washing Screen (2000x6000 mm – 3 decks) – 1 unit • TK-100 / Tertiary Crusher – 1 unit • TE-2060 / Vibrating Screen (2000x6000 mm – 3 decks) – 1 unit Nsdjyzxctspfx Ai Town • Hydraulic Unit for TK-100 • Hydraulic Unit for PDK-130 • Conveyor Belt System (widths: 1000 mm, 800 mm, 650 mm) • Control Cabin, Electrical Panel, Control Panel, and Automation System All our products are manufactured with great care and come with a 1-year warranty. Installation and Operator Training are FREE of charge! FOR MORE INFORMATION, PLEASE CONTACT US!