Used Super Condor Vertical Drill for sale (13,337)

Condition: reconditioned (used), Year of construction: 2012, Johnford SV-48H “Super Vertical” CNC Vertical Machining Centre Specification: Model: SV-48H Manufactured In June 2012 Heidenhain iTNC 530 CNC Control Maximum spindle speed: 6,000 rpm Machine Weight: 10,000 kg, stated on the plate Electrical supply: Three-phase, 415 V, 50 Hz Full-load current: 76 A Compressed-air pressure: 5–7 bar X-axis travel: 1,220 mm Y-axis travel: 710 mm Z-axis travel: 630 mm Table size: 1,300 × 700 mm Kedpfxez N H Eno Akisnc Maximum table load: 1,500 kg Spindle nose to table: 100–730 mm Spindle centre to column: 740 mm Spindle taper: BT50 Spindle motor: 11 kW continuous / 15 kW at 30-minute rating Spindle transmission: High/low gearbox Rapid traverse, X / Y / Z: 24 / 24 / 24 m/min Cutting feed rate: 1–12,000 mm/min Tool magazine: 24 Station Arm type ATC Maximum tool length: 400 mm Maximum tool weight: 15 kg For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #MAN001 Machine Serial Number: VBD12242 Cost: £24,950+ VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: like new (used), Year of construction: 2019, operating hours: 1,150 h, functionality: fully functional, PRODECO E 60 Super Vertical Briquetting Machine Briquet diameter: 60 mm Max. briquet length: 60 mm Motor power: 5.5 kW Knedpfx Aezl Aq Hokiec Capacity: 10/60 kg/h Pressing force: 900 kg/cm² Hopper dimensions: 1600 x 1600 mm Supply voltage: 400 V Dimensions: 215 x 180 x 150 cm (H) Weight: 870 kg Year of manufacture: 2019

Condition: excellent (used), two speed with switch Kjdpfxjyxcxae Akionc belt gear motor power 0,8kW clamp connection 380V

Condition: excellent (used), two speed with switch belt gear motor power 0,8kW Kodpfsyxl Nzex Akienc clamp connection 380V

Condition: good (used), Drill, pillar drill, column drill, column drilling machine Knsdpfx Akst Hy Uroisc -Manufacturer: Super Condor, pillar drill type 20 22 -Engine: unfortunately no type designation -Speed: Gearbox V-belt 8-speed -Table size: 255 x 255 mm, travel 670 mm -Spindle holder: MK2 -Spindle stroke: 120 mm -Feed device: yes -Projection: 205 mm -Column Ø: 100 mm -Dimensions: 830/380/H1730mm -Weight: 205 kg with pallet

Condition: excellent (used), Year of construction: 2014, Axle: 920 mm Knedpfefmdcqox Akiec X-axis: 3000 mm Material thickness: 12 mm - 30 mm Feed rate: 20 m/min A-axis: 360 degrees Minimum dimensions: Plate: x = 300 mm Y = 120 mm z = 12 mm The machine is equipped with a 4-position drill chuck and a saw blade. Maximum and minimum hole diameters that can be drilled: 3 - 35 mm The saw blade runs in the X direction. Max. cutting depth with saw blade: 10 mm Motor: 0.75 HP, 400 volts Required extraction capacity: 2300 m3/h Location: available at warehouse 54634 Bitburg - immediately available -

Condition: ready for operation (used), Year of construction: 2018, operating hours: 550 h, functionality: fully functional, power: 16.92 kW (23.00 HP), fuel type: gasoline, We offer you: Chipper – Garden Chipper Eliet Super Prof Max on wheeled chassis Year of manufacture: 2018 520 operating hours Equipped with a powerful 23 HP Vanguard EFI engine Hydraulic wheel drive Hydraulic feed roller with forward & reverse Up to 13 cm branch diameter Folding discharge chute, swivels 280 degrees Knjdpsy D I I Rjfx Akiec Electromagnetic engagement of knives 24 knives distributed over 6 discs Feed opening: 500 x 700 mm Approx. 6.5 m³ of chips per hour Noise level: 116 dB(A) Weight: 441 kg The machine is also available for rent.

Condition: as good as new (ex-display), functionality: not functional, Vertical drilling machine with feed gripper system for material positioning. WITHOUT control system and therefore not operational. Control cabinet is available but partially incomplete. Operating manual and circuit diagrams are available. WORKING RANGE Round material: 20 mm – 150 mm Square material: 20 mm – 140 mm Flat material (width): 20 mm – 240 mm Flat material (height): 5 mm – 140 mm Ksdoy At Iyepfx Akionc DRILLING UNIT Vertical from above Min. drilling diameter: 6 mm Max. drilling diameter: 25 mm Tools: HSS drills only Spindle speeds: 380 rpm – 1,600 rpm Rapid traverse/return: max. 11,000 mm/min Drilling feed: 10 – 1,500 mm/min Drill slide positioning: max. 17,000 mm/min DRIVE POWER Frequency controlled (87 Hz characteristic curve): 2.6 kW MANUAL TOOL CHANGE Quick-change tool holder: MK3 WORKPIECE CLAMPING Horizontal: max. 5.6 kN FEED GRIPPER Stroke length: 670 mm Feed speed: 6 – 60 m/min Return speed: 60 m/min AIR CONSUMPTION Approx. 300 l/min MACHINE DIMENSIONS (L x W x H): approx. 1,610 x 1,120 x 2,400 mm WORKING HEIGHT above floor: 1,040 mm WEIGHT Machine without accessories: approx. 1,600 kg COMPRESSED AIR CONNECTION Customer side (for air cooling system): 6 – 8 bar

Condition: used, Comec 3-Spindle Vertical Drill Maximum piece length cm. 100 Ksdpfxoy S Adio Akienc

Condition: refurbished (used), Lower and upper drill, tiltable, for chair seats of Old America type or similar products Ksdpjytr Edsfx Akionc no. 4 independent lower groups, tiltable No. 2 upper vertical oscillating groups

Condition: used, Year of construction: 2016, Vertical CNC drilling and machining center Manufacturer: Weeke Type: Optimat BHX Year of manufacture: 2016 Technical data - Working area X: max. 3,050 mm - Working area Y: 70,850 mm - Workpiece thickness Z: 12,60 mm - Workpiece weight: max. approx. 35 kg - Number of axes: 3 - Milling spindle: 5 kW - Milling spindle speed: max. 18,000 rpm - Tool holder: HSK-F63 or ETP 25, depending on the version - Tool change: automatic tool magazine - Tool positions: 4 - Vertical drilling spindles: 13 - Horizontal drilling spindles X: 4 - Horizontal drilling spindles Y: 2 - Drilling unit: V13 High Speed - Drilling unit power: 2.3 kW - Drilling speed: 1,500 - 7,500 rpm - Max. drilling depth: approx. 38 mm - Drilling diameter: max. approx. 35 mm - Spindle spacing: 32 mm - Dado saw: in X-direction - Dado saw blade: approx. 100 mm - Workpiece transport: throughfeed system / transport chain - Workpiece clamping: collet gripper, vacuum-free clamping system - Control system: HOMAG powerControl / powerTouch - Software: HOMAG woodWOP - Total connected load: approx. 11.5 kW - Dust extraction connection: approx. 160 mm - Dust extraction air requirement: approx. 2170 m³/h - Weight: approx. 1500 kg - CE Note: Kjdpfxszy N E Hs Akijnc The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, 4-spindle adjustable vertical drilling machine, Camam brand + 3 spindles to be revised Knedpfx Akszz Rpvoioc

Condition: excellent (used), two speed with switch belt gear motor power 0,3kW CE year 2003 Knsdpfx Ajyxl N Ujkioc Connection 380V

Condition: used, Vertical drilling machine with 2 adjustable spindles. Maximum drilling width 440 mm Minimum drilling width 250 mm Kjdpfezxg Dwex Akienc Maximum depth 250 mm Engine power hp. 2

Condition: used, Vertical milling head, milling head with motor drive THIEL Tool holder: MK 5 (Morse taper size 5) Quill stroke, spindle travel: 80 mm Spindle speed at motor speed 1410 rpm = 490 / 780 / 1200 rpm. Spindle speed at motor speed 2950 rpm = 970 / 1530 / 2380 rpm. Spindle bore: 37 mm Motor power: 1.4 / 1.8 kW Motor speed: 1410 / 2850 rpm Power connection: 400 Volt, 50 Hz - Spindle speed via 2 motor speeds and 3 belt stages - Mounting flange milling head Ø 215 mm with 2 bores Ø 15 mm, hole spacing 180 mm - suitable for tools with drawbar thread (ejector tang interferes with clamping) Required space L x W x H: 450 x 400 x 350 mm Net weight: 61 kg Ksdpfxjxddwro Akisnc Good condition

Condition: excellent (used), Year of construction: 2014, Vertical glass drilling machine, 1500 x 3000 Knjdpfx Aksy Nltneiec Max. glass size: 1500 x 3000 mm Glass thickness: 3 – 20 mm Drilling diameter: 3 – 100 mm Control: NC controlled Drilling heads: 2 opposing drilling spindles (front and rear) Spindle speed: Adjustable via inverter Total floor dimensions: 7500 x 2200 x 2800 mm Excellent condition Good working order, tested As is Available immediately

Condition: used, 2-spindle vertical drilling machine Kjdpfx Akjyg Ix Tjisnc

Condition: excellent (used), Year of construction: 2009, Vertical glass drilling machine SCHRAML topDRILL 130 NC Year of production: 2009 Maximum working height: 1300 mm NC controlled Very good and clean condition Surplus drilling/countersink bits included As is Available immediately Knedpfxjyfrvye Akijc

Condition: used, Vertical drilling machine with 2 spindles, tested, working. 2-pindle vertical drilling machine, tested, working. Kedpfx Akszxg Ayjijnc

Condition: used, 4-spindle vertical drilling machine for curved pieces such as chair backs or similar Ksdpezb A Rgofx Akisnc

Condition: used, Twin vertical band saw with log lengthener. Suitable for widths from 70mm to 200mm. Log length from 50cm up to 3.7 meters. Knodpfxeyh Hc Re Akiec

Year of construction: 2000, condition: used, machine/vehicle number: 001119, SECOND-HAND MULTIPLE HORIZONTAL AND VERTICAL DRILLING MACHINE COMEC MOD. FOV/3+CA - CE RULES - N. 2 horizontal boring units - N. 1 Vertical boring unit - Automatic loader - Volt. 415/50 - S/N 001119 Kedpfoqmi Epox Akisnc - Year 2000

Condition: good (used), 3-row Planting wheels with 8 large planting spoons 3 rubber planting discs Distance in the rows adjustable with the correct gears: 26, 29, 34, 40, 45, 52, 68 cm Kedpfx Aoz Rgfqskienc The gripper is opened automatically and is closed by light manual pressure when the plant is pressed onto the gripper. The rotation of the planting disc transports the plant downward inside the coulter. The gripper then automatically releases the plant into the soil in front of the press wheels. The operation is completed by the V-shaped inclined press wheels, which firmly press the soil around the roots to ensure efficient plant growth. More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: excellent (used), Year of construction: 1955, Drilling capacity in steel St 37: Ø 65 mm Drilling capacity in cast iron: Ø 75 mm Spindle mount: MK 5 Overhang: 1250 mm Spindle stroke: 400 mm Spindle speeds: 22.4 – 1800 rpm Feed range: 0.056 – 0.56 mm/rev Column diameter: Ø 300 mm Motor power, 2-stage: 3.6 / 4.8 kW Clamping area, base plate: 1320 x 1000 mm Dimensions L x W x H (with motor!): 2250 x 1000 x 3100 mm Transport dimensions L x W x H (without motor!): 2250 x 1000 x 2800 mm Weight: 5100 kg Knodpfx Aotwzk Djkiec Accessories / Special features: • Square table L x W x H 650 x 500 x 500 mm • Central clamping device • Feed mechanism • Right-left operation • Motorized vertical movement • High speed range up to 1800 rpm • Coolant system • Lighting Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: good (used), Hang 114-30/4 Paper Drill Machine The unit is in perfect condition and 100% functional. A top-tier machine in the category of paper drills. This is a currently manufactured model, featuring the most comprehensive equipment configuration available. Equipped with two integrated frequency converters (inverters) for stepless spindle speed adjustment (260 – 1,800 rpm) and smooth table elevation. Knsdpfez S Un Aox Akisc Rapid drill zeroing/alignment system. The drilling table is adjustable in all planes; the margin (backgauge) setting is controlled via dial indicators. Waste material is directed into an external container. Operated via an electric foot switch. Energy-saving standby mode. Automatic drive belt tensioning. Each drilling head features independent adjustment, allowing for the use of drills of varying lengths. Includes a cooling and lubrication system for the drills. Technical specifications: Number of drilling heads: 4 Drill diameter: 3–10 mm Stack height: 65 mm Drill spacing: min. 36 mm / max. 260 mm Table dimensions: 600 x 480 mm Power supply: 400 V Weight: 400 kg The machine comes with documentation, maintenance tools, and drill bits.