Used Supply Simulation for sale (9,991)

Condition: refurbished (used), Year of construction: 2015, SPITZENBERGER & SPIES Bordnetzsimulation Supply Simulation System PAS 15000/GN/KFZ/OPD The device is from VW. Update: Device overhauled by the manufacturer. As pictured. Nsdpfx Acowg Rzfofewh According to specifications, the following tests can be carried out: Audi BDM LAH XXX.915.181.XX ISO 7637-2 ISO 16750-2 ISO 21848 LV 124 SAE J 1113-11 VW TL 80101 VW TL 82066 VW TL 82366 Among others, the following components are installed: Power Supply NT 15000/GN/Kfz SyCore 2-Quadrant Amplifier PAS 15000/GN/Kfz Overvoltage Protection Device OPD 15000/GN/Kfz The instruction manual can gladly be sent by email in advance. Viewing welcome. Also see my other measurement and test equipment offers.

Condition: used, Year of construction: 2006, machine/vehicle number: 20618, Heißfolienprägemaschine / Hot Foil Stamping American Supply HFS Year 2006 - Serial-No. 20618 Prgefläche / Hot Foil Stamping area max. 80 x 150mm Druckleistung / Pressure max. 600Kg Online-Video-Inspection by Skype-Video Nwedeup Eimopfx Acfjh We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Product supply bunker “Heckmann” with hopper ± 2.000L with driven shafts with fingers to separate the product input height: ± 3,400 mm 2 x 3kW, 1500 / 16 rpm dimensions (l x w x h) : ± 2.700 x 2.600 x 3.400 mm Nsdjzg U Dzepfx Acfowh + Elevating spiral screw “Heckmann” all stainless steel discharge height: ± 5.800 mm diameter of the screw : ± 600 mm length of the screw : ± 8.500 mm dimensions hopper: ± 1.300 x 1.000 mm dimensions: (l x w): ± 9.200 x 1.600 mm safety grille 5.5kW, 1500/20 rpm

Condition: good (used), TDK-Lambda Type: GEN10-240 TDK-Lambda GEN10-240 | Power supply, DC, 1 channel, 2U, 10V/240A, 2,400W, RS232, RS485 in a 19-inch enclosure Nodpfozg Exvex Acfswh Technical data: Manufacturer: TDK-LAMBDA Power supply type: Programmable laboratory power supply Display type: LED x2 Number of channels: 1 Output voltage: 0...10V DC Output current: 0...240A Max. power: 2.4kW Mounting: Rack 19" Output voltage resolution: 1.2mV Output current resolution: 28.8mA Voltage ripple and noise (regulated): ≤8Vrms, ≤60Vpp Input connector type: Terminal block Manufacturer series: GEN Operating temperature: 0...50°C Dimensions (width x height x depth): 423x43.6x432.8mm Parameter display: 4 digits Software: LabVIEW Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: excellent (used), Knürr-Heinzinger Type: PHN 1200-4 Power Supply: Mains 1200 Volts Nwjdpfszgcbhjx Acfeh 4 Amperes Condition: used Scope of delivery: (See image) (Subject to change and errors in the technical data and specifications!) We will gladly answer any further questions you may have over the phone.

Year of construction: 2014, condition: new, DC-Sputtering Power Supply ADL HX 300/1000 Year of construction: 2014 (New, never used) Power: 30 kW (see photo for more technical details) Nwedpjzg Iffsfx Acfoh

Condition: new, IPETRONIK Interior Simulation Box Nwedpfx Acezd Ukpofoh Here we offer an IPETRONIK interior simulation box. Technical data and description of the system: IPETRONIK Interior Simulation Box (new and unused) The interior simulation box is designed to simulate the passenger compartment for tests in recirculation mode. It has a variable interior volume of 1.8 to 4 m³. The exhaust air volume flow from the front evaporator or the air conditioning unit is regulated and directed into the interior. Only rear evaporators installed in the passenger compartment are tested with the interior simulation box. The insulated housing is mounted on an aluminum profile frame with rollers. A light is installed in the chamber. The box is protected against overheating via a safety thermostat (ESTI). If the permissible temperature is exceeded, a glass cartridge in the ESTI is destroyed. The system is stopped. (TRIGGER TEMPERATURE: 80°C) Technical data of the insulated chamber: Dimensions: External: Width 1,860 mm, Depth 2,360 mm, Height 1,360 mm Internal: Width 1,700 mm, Depth 2,200 mm, Height 1,200 mm Insulation: 80 mm rigid polyurethane foam, CFC-free, U-value 0.27 W/m2K, building material class B1 according to DIN 4102 Technical data and description of the system: Connection: Tongue-and-groove system with foam-injected eccentric locking latches. Surfaces: Both sides: 0.8 mm stainless steel sheet 1.4301, polished, grit 320 Floor design: 2.0 mm stainless steel sheet 1.4301, SM rhombus pattern, non-slip, Floor with a 90° upturned edge around the perimeter (approx. 15 mm), floor sheet flush with wall sheet, Pressure distribution plate made of laminated wood, can withstand a load of 1,500 N / rubber wheel (contact area > 4 cm2), 30,000 N/m2 surface load, floor joints completely welded, welded stainless steel pipe as a floor drain, led downwards through the floor Chamber door: Hatch door, 1-leaf, 800 x 1200 mm i.L., DIN left, heated door frame (230 V), Heating tapes are silicone-free, 4-sided sealing profile made of EPDM, Latch closure, lockable, emergency release, Heated viewing window, 500 x 500 mm, triple-glazed, Surface heating (230 V), frame heating (230 V), heating controlled by the customer, Silicone-free edge trim Sliding wall: 1680 x 1180 mm, 80 mm rigid polyurethane foam, 0.8 mm stainless steel sheet 1.4301 on both sides, polished, grit 320, with protective film, closed on the other side with sheet metal (The rear wall is manually adjustable in stepless increments to change the volume) Recirculation system: A heat exchanger (Systemair) for indirect temperature control is installed in the recirculation circuit for temperature control. The air is circulated by a radial duct fan (Cosmo), and heating is provided by an electric heater (Türk and Hillinger) integrated into the brine circuit. The heaters are continuously monitored by means of temperature monitors and limiters (Türk and Hillinger, Johnsson Controls). Cooling is carried out via a secondary brine circuit with pumps (KSB) and a 3-way valve (Belimo). Installed electrical heating power 1 * 6kW. The mixing ratio is 50% water / 50% ethylene glycol. Power supply from station: =TME2++AS-QF21 Operating voltage: 400V Power: 17kW Rated current: 33A Fuse: 35A Control voltage: 24V DC / 24V AC / 230V AC PLC system: S7 300 Type: IPETRONIK Interior Simulation Box Condition: used Scope of supply: (See picture) (Changes and errors in the technical data, information are subject to change!) We will be happy to answer any further questions

Condition: good (used), Input: AC 187–264 V, 5.0 A 47–66 Hz Output: DC 60 V/8.0 A Application: System supply Height: 123 mm Depth: 100 mm Length: 225 mm Weight: 1708 g Condition: good, second-hand Nwedpfx Acozd S Hnjfeh

Condition: used, Supply air unit type 3072 A 7300/3650 m³/h, max. heating capacity 83 kW, hot water 90/70 °C. Exhaust air unit type 72 7000/3500 m³/h. Storage location: Nattheim. Nwsdpfxjw I A N Aj Acfeh

Condition: good (used), Input AC: 100–120 VAC, 9 A 200–240 VAC, 4.5 A 50–60 Hz Output DC: 72 V/6.7 A Application: Systems engineering Width: 62 mm Height: 125 mm Depth: 120 mm Weight: 884 g Condition: good, second-hand Nsdpfx Aozdynaecfswh

Condition: good (used), Berger Type: PSS 8 Berger Solar Simulator, Pulsed Solar Simulator Nwedpezdqvhefx Acfsh Solar Simulator PSS 8 230 Volt, 50 Hz, 1000 W, 3.15 ATT Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: good (used), Ifsys Type: 114100, Type: VL 13 Screw feeding system Hopper system with 2x Vibroliner and 2x Vibrohopper 1x Return conveyor 2x Control unit FC 1000 Condition: used Nwjdpfx Acjzdp Icsfeh Scope of delivery: (See image) (Changes and errors in the technical data and specifications are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: good (used), Manufacturer: Engel / Bosch Nedjiy Ddfepfx Acfewh Operating pressure: 280 bar Capacity: 65 l/min Overall dimensions: 1800 x 800 x 700 mm Voltage: 380 V Electric power: 15 kW

Condition: like new (used), functionality: fully functional, Ferwood Code: RS0003617 - Manufacturer Code: HVR02,2-W025N - Condition: Like new (showroom item) - Functionality: Fully operational - Compatible Machine: CNC HOMAG-IMA - Weight: 22KG - Dimensions: 70X46X34 - If interested, we offer an overhaul service; please contact us. Nodpfezd Eyzsx Acfewh

Condition: good (used), Converter, power supply, switching power supply, DIN rail power supply, servo module, AC/DC power supply, DC power supply, power supply module -Manufacturer: LinMot, Switching Power Supply 72V/1000W -Type: S01-72/1000 Nedpoxvrwdjfx Acfewh -Mains voltage range: Ue. AC 3 x 340-550V / 50/60Hz. -Dimensions: 270/65/H195 mm -Weight: 2.1 kg

Condition: ready for operation (used), Bosch NT 600 power supply, serial number as shown in the photo, used, minor signs of wear, 100% functional. Nwsdpfx Acsi D Uarsfeh

Condition: ready for operation (used), Contraves PS 700 DC power supply, used, in good condition, 100% functional. Njdpfxoi D Umho Acfjwh

Condition: ready for operation (used), Okuma DC-S1A DC power supply for 4 axes, CZ-270C, serial number as shown in the photo, used, with normal signs of wear, 100% functional. Nwsdei Ecanspfx Acfoh

Condition: ready for operation (used), Okuma OPUS 5000 GHP power supply, 5000T, serial number: 00198, see photo for serial number. Used, shows normal signs of wear, 100% functional. Nwjdpfxsi Ecare Acfoh

Condition: new, Siemens 6RA4001-1AA01 Simodrive Power Supply < unused > in opened original packaging, 100% functional. Nsdpfx Aoxagwajcfewh

Condition: ready for operation (used), Fanuc A06B-6077-H106 Power Supply Module Version: C SN:V01110794, the item has been checked and tested! ,used, normal signs of use, 100% functional, scope of delivery as per photos Nwedpfx Asmvknpocfeh

Condition: ready for operation (used), Indramat TVM 2.1-50W1-220V A.C. servo power supply, used, shows normal signs of wear and tear, 100% functional. Nedei Ebrkspfx Acfjwh

Condition: ready for operation (used), Marposs 6366160401 Power Supply 706 C365 330/20W 100-120/200-240V-AC 50-60 Hz, used, in good condition, 100% functional, scope of delivery as per photos. Nwjdpfxoy Nryno Acfoh

Condition: ready for operation (used), Heidenhain / zentro-elektrik VSNT 400 / 8610-1 Power Supply SN:100647, used, minor signs of wear, 100% functional, scope of delivery as shown in the photos. Nedpfjx Err Nex Acfowh

Condition: ready for operation (used), Alsthom Parvex NFC 53 220 / AMS 2300515 Power Supply,used, minor signs of wear, 100% functional, scope of delivery as per photos Nwodpfx Aotqa T Recfsh