Used Support Carriage for sale (13,201)

Condition: good (used), Upper support, upper slide, dovetail guide, tool slide, cross table, support slide, support carrier -Tool slide: Support slide support carrier with turning tool holder -Clamping height: 40 mm -Dimensions: see photos -Dimensions: 370/180/H170 mm Hjdpfx Aowcwizjizel -Weight: 17.8 kg

Condition: good (used), Upper support, upper slide, dovetail guide, tool slide, cross table, support slide, support carrier, slide guide -Tool slide: Support slide lower part support carrier Hodpfx Aiswcw S Njzol -Dovetail: 90 to 73 mm 12 mm high -Dimensions: see photos -Quantity: 5x bottoms available -Price: per piece -Dimensions: 210/180/H25 mm -Weight: 4 kg/piece

Condition: good (used), Upper support, upper slide, dovetail guide, tool slide, cross table, support slide, support carrier Hodpfx Aiov Tv Tnjzjl -Tool carriage: support carriage support carrier -Support plate: 265 x 180 mm -Dimensions: see photos -Dimensions: 290/280/H70 mm -Weight: 21.1 kg

Condition: good (used), Upper support, upper slide, dovetail guide, tool slide, cross table, support slide, support carrier -Tool carriage: support carriage support carrier Hsdpfjwcwndex Aizel -Tool holder: Ø 32 mm -Dimensions: see photos -Dimensions: 460/190/H205 mm -Weight: 21.6 kg

Year of construction: 2025, condition: new, This robust professional cable stripping machine, type KM1, cuts electrical cables from 1 to 70 mm in diameter. The blades are hardened so when stripping reinforced ground cable they are not immediately blunted. There are 15 different cable entries. The cable is cut from 2 sides so the copper core comes out easily. You can also use it to strip rubber and flat cables. Technical data: Mains voltage: 230 v ~ 50 hz Power: 3000 watts with dual pulley drive. Dimensions: 60 cm long, x 75 cm wide and 90 cm high Hsdpfxsp I I U De Aizel Machine speed: 35 m/min Output: Depending on the cable 400 and 1200 kg/day Weight: 185 kg.

Year of construction: 2023, condition: new, functionality: fully functional, This machine, type KM13, cuts electrical cables from 20 to 120 mm in diameter. The different diameters are easily adjusted by turning the hand wheel up and down. The machine has a speed of 25 mtr/min. The dimensions are: length 600 mm, width 600 mm and height 1600 mm. The weight of this machine is about 200 kg. This machine is powered by a 380V-50HZ, 3KW electric motor with a gearbox cabinet. The cable is cut from 2 sides so the copper core falls out easily. Spare parts such as blades, drive, bearings etc can also be supplied. If required we can also perform maintenance on these machines A machine that is ready to use and easy to operate. Hodpfx Aeq E Ti Hjizjl If you want to try it, please bring cable.

Condition: used, 3700mm long, 960mm high, and adjustable Storage location: Nattheim Hjdpev Dauqjfx Aizsl

Year of construction: 1999, condition: used, functionality: fully functional, Manufacturer VITAP Model SIGMA 2TA Machine type Multi support drilling system for line and dowel drillings Year of manufacture 1999 Hodpsiffpxofx Aizjl Feed-through line – yes Drilling supports from below – 4 Horizontal drilling supports – 2 Drilling block positionin gmanually Working width max2.500 mm Working depth700 mm Passage height max 40 mm Grid 32 mm – yes Drilling blocks per support – 2 Number of clamping bridges 2 Pneumatic top pressure Drilling support positioning – manually Drilling bars 90° pivotable Drilling spindles per support – 2 CE marking – yes Weight 1.600 kg

Condition: new, Year of construction: 2024, functionality: fully functional, power: 3 kW (4.08 HP), pivoting range: 90 °, rotational speed (max.): 10,000 rpm, rotational speed (min.): 3,000 rpm, Equipment: CE marking, documentation/manual, new, unpacked table router with spindle tilting, diameter 30 mm. Sliding carriage at the front side. Speeds: 3000, 6000, 8000, 10000 rpm Hodoy El T Tspfx Aizsl

Condition: excellent (used), DEMAG / ABUS / STAHL / LIFTKET - travelling trolleys / push trolleys / running wheels / rollers - 24 pieces: Hsdpfx Aey D Tvyeizsl 1. Demag Type: U/EU 22 DC - 2200 kg (2 pcs). 2. Stahl - 1000 kg. 3. Abus Type: EF14 - 1400 kg. 4. Liftket Type: HFW500 - 500 kg. 5. Trolley, 2 pcs. 6. Trolley - 5000 kg. 7. Demag - 1350 kg. 8. Abus - 580 kg. 9. Demag Type: EU-RU 5 PK - 1100 kg. 10. Demag Type: EU/RU 22 DK - 2600 kg. 11. Trolley, 3 pcs - 1100 kg. 12. Hadef roller - 2000 kg. 13. Running wheels / rollers - 7 pcs.

Condition: excellent (used), CATALOG NUMBER 7968 TECHNICAL DATA - Max blade diameter: 450mm - Blade bore diameter: 30mm Hsdjy D I Rxopfx Aizsl - Max size of cut blocks (length/width/height): 150x90mm - Material feeding type: rotary/carousel conveyor - Number of working stations: 6 pcs (adjustable to the size of the timber being cut) - Stepless feed speed adjustment of the conveyor via frequency inverter - Block size adjustment - Automatic - Total power: 6.25kW - Extraction nozzle diameter: 120mm - Dimensions (L/W/H): 1800x1750x2100mm - Weight: approx. 500kg ADVANTAGES – Carousel-type – Very good condition – Used machine Net price: 14,900 PLN Net price: 3,550 EUR (based on exchange rate 4.2 EUR) (Prices may fluctuate with major currency changes)

Condition: excellent (used), Catalogue number 7833 TECHNICAL DATA - Max blade diameter: 400mm - Blade bore diameter: 30mm - Max cutting height: 110mm - Main blade adjustable up/down and at an angle - Blade guard included - With side carriage - Angle guide - Cutting length on carriage: 870mm - Cutting width at the fence: 600mm - Main motor approx.: 4kW - Table dimensions: 900x1020mm - Extraction port diameter: 110mm - Overall dimensions (L/W/H): 2500x1400x1000mm - Weight: 530kg Hedpfx Asyz Nycjizel ADVANTAGES – Polish manufacture – Includes side carriage – DTR technical documentation – Used saw, very good condition Net price: 7500 PLN Net price: 1790 EUR based on 4.2 EUR exchange rate (Prices may change with significant fluctuations)

Condition: like new (used), Year of construction: 2023, functionality: fully functional, operating hours: 5 h, power: 5 kW (6.80 HP), input voltage: 400 V, pivoting range: 45 °, rotational speed (max.): 10,000 rpm, rotational speed (min.): 3,500 rpm, table width: 530 mm, table length: 1,200 mm, overall weight: 510 kg, tool diameter: 240 mm, Equipment: CE marking, Professional woodworking machine with tilting milling spindle and cantilever arm. Exhibition machine like new - used only for demonstration purposes Milling unit made from cast iron, tiltable up to -45° backwards Four milling speeds from 3500 to 10000 rpm Forward and reverse rotation Height and tilt display accurate to 0.1 mm Quick speed change via eccentric clamping Powerful 5.0 kW industrial motor Curved milling hood included Made in Italy Milling spindle tilt 0 – -45° Usable spindle length 125 mm Spindle speeds 3500/6000/8000/10000 rpm Speed indication via LED display on the front panel Spindle shaft diameter 30 mm Hsdpfxsyn Ny Uo Aizjl Max. tool diameter 240 mm Max. retractable tool diameter 230 mm Max. tenoning tool diameter 320 mm Accessories included: Mitre fence with two flip stops Eccentric clamp Curved milling safety guard Additionally, adjustable system fence jaws The machine can be inspected and tested at any time at the Chemnitz location.

Condition: new, functionality: fully functional, machine/vehicle number: FN744944, Year of construction: 2025, operating hours: 15 h, load capacity: 2,000 kg, lifting height: 3,000 mm, free lift: 150 mm, load center: 500 mm, fuel type: electric, mast type: duplex, power: 9 kW (12.24 HP), battery capacity: 750 Ah, remaining battery capacity: 100 %, battery voltage: 48 V, battery weight: 962 kg, fork length: 1,200 mm, tire condition: 100 %, overall weight: 2,350 kg, empty load weight: 2,350 kg, color: yellow, Equipment: gripper hydraulics, lighting, pallet forks, sideshift, We offer this new Jungheinrich EFG 320 front loader forklift with fork rotator (180 degrees) carriage, year of construction 08.2025 Type: EFG 320 Serial number: FN744944 Rated capacity: 2000 kg System voltage: 48 V Mass of truck without battery: 2350 kg Hedoy A Hhmepfx Aizel Option: G120-300ZT Year of manufacture: 08.2025 Load center distance: 500 mm Nominal power: 9.0 kW Battery mass min: 962 kg Battery mass max: 1094 kg If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 1998, AMADA MODEL GPN 630 HYDRAULIC SHEAR PNEUMATIC REA SHEET SUPPORTS ELECTRONIC REAR SAFETY GUARD Max. cutting width: 3050 mm Max. cutting capacity for steel: 0.4 - 6.0 mm Max. cutting capacity for stainless steel: 4.0 mm Max. cutting capacity for aluminium: 8.0 mm Adjustable back gauge: 1050 mm NC control Cutting gap adjustment via control Cutting angle adjustment via control: 0.4 – 2.2° Sheet holding function Strokes per minute: 33 cuts Motor power: 5.5 kW Dimensions (L x W x H): approx. 3800 x 2300 x 1950 mm Weight: approx. 6.5 tons STANDARD EQUIPMENT PROGRAMMABLE MOTORISED BACK GAUGE 2.0 METRE SIDE GAUGE 1.5 METRE FRONT SUPPORTS SHADOW LINE LIGHT AUTOMATIC HYDRAULIC HOLD DOWN CLAMPS CENTRALISED LUBRICATION FOOTSWITCH SHADOW LIGHT BEAM CYCLE COUNTER BLADE GAP AND RAKE ANGLE ADJUSTMENT Hjdpjyypb Rjfx Aizjl ONE SET OF BLADES 4 CUTTING EDGES ADJUSTABLE STROKE PNEUMATIC SHEET SUPPORTS HOUR COUNTER AUTO-DIAGNOSTICS

Year of construction: 2024, condition: new, Trolley for handling and storing oversize sashes/frames COMALL CARR 900-93/15 Q, new Technical features: - Contact surfaces coated with non-scratch and shock-proof plastic material Hsdpem H Twgjfx Aizol - Max. height sashes/frames 2500 mm - N° 16 couples of posts - 15 compartments with working size 93 mm - 4 wheels Ø 125 mm, 2 of them with locking device - Load capacity: 850 Kg

Year of construction: 2024, condition: new, Trolley for carriage of sashes and frame COMALL CARR 600 - 85/9 Q, new Hsdpfjlfargex Aizol Technical specifications: - 9 compartments with working size 84 mm - Contact surfaces coated with non-scratch and shock-proof plastic material - Rollers for sash carriage - 4 wheels Ø 125 mm, 2 of them with locking device - Support: 560 Kg - Carton packing

Condition: used, Equalising block for low-bed semi-trailer Dimensions – see photos ##### PLEASE CALL – NO EMAILS! ##### Hedpfxey A D N Io Aizel

Year of construction: 2024, condition: as good as new (ex-display), Rolleri C-UP-1500 EVO support bar cleaner Hedpfx Ajwtqqyoizsl for cleaning support plates on flatbed laser systems Milling cutter with pneumatic traction device for bridge width 3 and 4 mm Handle length 2000 mm for laser systems with 2000 mm working width Demonstration unit

Condition: used, Year of construction: 2011, functionality: fully functional, power: 56 kW (76.14 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, total height: 1,800 mm, total length: 4,800 mm, total width: 2,150 mm, Equipment: documentation/manual, Artiglio carriage with a Artiglio headrig for sale. Carriage is equipped with 3 Independent knees, positioning done by servo motors. Program for cutting and manual dimension setup done through a touch display for ease of use. Carriage forward and reverse movement controlled by pedals, carriage is driven by an on board hydro motor. Turning, clamping and manual knee positioning done with joysticks. Cables and hydraulic hoses are ran to carriage through a pantograph. Schematics and user manuals in digital and printed format. Carriage and headrig have been removed, cleaned and some restoration work done after removal. Condition wise everything is fully functional just visual wear. Currently packed, stored in a warehouse and ready for shipping. Carriage: Model - NIBBIO 1000 Length - 4.8 m Hodpfx Aoy Anp Esizol Width - 2.15 m Height - 1.8 m Longitudinal speed - 0-130 m/min Maximum side opening - 1000 mm Upper jaw opening - 800 mm Distance between wheels - 1260 mm Tow rope type - S10AR Towing rope diameter - 14 mm Overall length of towing ropes - 41 m Central tank capacity. Hydraulics - 120 l Longitudinal drive - 20 HP ONBOARD HYDROSTATIC Year - 2011 Headrig: Model - ST/I 130 Main motor power - 56 Kw Total weight - 4750 kg Flywheel diameter - 1300 mm Year - 2011

Condition: new, RIMORCHIO ECOSLIM 3 ASSI, NUOVO, SCARRABILE, ADR, ASSE CENTRALE SOLLEVABILE, FRENI A DISCO, BARRA STABILIZZATRICE, SOSPENSIONE PNEUMATICA CON LIVELLATRICE AUTOMATICA SEPARATA, BLOCCAGGIO CASSE IDRAULICO Hjdpfx Aish N T H Uozsl

Condition: good (used), Hydraulic clamping trolley Type VS. Track width 790 mm. Trolley height 390 mm. With auxiliary trolley HEH or HKE. Hedpsxwn Rvsfx Aizsl

Condition: good (used), Sturdy block clamping carriage for horizontal fence or band saw Length approx. 9.0 m. Track width 920 mm. 6 clamping blocks. With hydraulic feed. Hsdpfxotqd Nas Aizsl Also suitable for feeding drying kilns etc.

Condition: excellent (used), functionality: fully functional, 2 pieces of gate uprights, heavy-duty design, for Esterer Gatter HDE or SS 71, with cover. Hodpfxexw Uf Tj Aizjl

Condition: used, Tol measurements SK50 0 weight max. . t range L-W-H . mm with contents see photos The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale Hedpfx Asyycxijizjl apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team