Used Surface Roughness Tester for sale (11,293)

Condition: ready for operation (used), Mahr Marsurf XR 1, Marsurf SD 26 roughness measuring instrument, measuring instrument, granite measuring plate Mahr Marsurf XR1 with Marsurf SD 26 feed unit: Lodpfx Amjz H Uklezjah Measurement of roughness, waviness, and profiles Measuring range: ±250 µm Measuring range with longer stylus arm: up to ±750 µm Vertical resolution: up to 0.7 nm Measuring length: 26 mm Feed speed: 0.1–1.0 mm/s Positioning speed: 5 mm/s Motorized height adjustment: 7.5 mm Measuring force: approx. 0.7 mN Cut-off: 0.08 / 0.25 / 0.8 / 2.5 / 8 mm Individual measuring lengths: 1–50 Evaluation: Roughness, waviness, and profile Measured parameters: including Ra, Rq, Rz, Rt, Rp, Rv, RSm, Rsk, Rku, Rk, Rpk, Rvk Software: MarWin Measuring stand: MarSurf ST-D Measuring plate Dimensions: 600mm x 500mm Brand: Bilz Type: F60-50 Max. load capacity: 130 kg You are welcome to visit us for an inspection. We will gladly arrange a cost-effective shipping service for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and browse our other offers as well. The company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data as well as errors in the description of the item may occur and are subject to change.

Condition: good (used), Roughness measuring device, HOMMEL / Jenoptik, type Waveline 20 (Tester T1000), in fully functional condition. Plate size: 400 x 280 mm Column height: 400 mm Ledpfx Amezcy N Ajzeah Plate width: 280 mm Plate length: 400 mm Adjustment range, max.: 300 mm

Condition: used, Mahr Perthen Perthometer S4P roughness measuring instrument Lasdeihfmujpfx Amzsh 1 x Mahr Perthen Perthometer S4P roughness measuring instrument 1 x Mahr Perthen 6 86 20 63 1 x Mahr Perthen 42 50 01 50, up to 160 mm Ø More roughness measuring instruments in other sizes – new and used – can be found here.

Condition: used, Optacom VC-10 Universal Measuring System Surface Roughness Tester / Contour Measuring Device Device is sold without PC and software (hardware only). Resolution in X and Z axes: 0.002 µm Resolution at the probe tip: 0.003 µm VC-10 measuring range horizontal/vertical (X-axis/Z-axis): 225 mm Measuring system: optical, incremental, and non-contact in all axes (X, Z, T) Accuracy: +/- (0.5 + L/100) µm Maximum measuring force: 10 - 150 mN Measuring speed: 0.1 – 2 mm/sec (automatically optimized) Probe tip radius: 0.002 – 1 mm Measurable slopes: 78° upwards; 87° downwards VC-10 dimensions (W x D x H): 950 x 380 x 725 mm Laedpfxoybbd Se Amzoh VC-10 weight (approx.): 150 kg Description has been adopted as provided. You are welcome to arrange an on-site inspection. Upon request, we can organize affordable shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued provided a valid VAT ID number is supplied. Subject to prior sale. Visit our shop and check out our other offers as well. The company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data and errors in the description of the item may occur and are subject to change.

Condition: ready for operation (used), Year of construction: 2009, Mahr MarSurf CD 120 Contour and Roughness Measuring Instrument, Surface Measuring Instrument Measuring range: 120mm Measuring force adjustable from 2 mN to 120 mN Mahr ST 500 measuring stand Year of manufacture: 2009 Laedpfx Amjzmtlqszeh Accessories: Contour measuring probe: Mahr PCV probe arm 350 Roughness measuring probe (software license for roughness measurement has expired) Mahr calibration standard Mahr cross slide table You are welcome to come and inspect the equipment. We would be happy to arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued, provided a valid VAT identification number is available. Subject to prior sale. Visit our shop and see our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data and errors in the description of the item may occur and are subject to change.

Condition: used, Year of construction: 1996, diameter / mm Laodpfxstvm Sme Amzeh workpiece length / mm length / mm MITUTOYO SURFTEST SV-500 Roughness tester with OLZE measuring plate Size: 600 x 600 x 80mm Target µm: 16 Actual µm: 10,00 Own weight: 85kg Information on the scope of delivery The package contains only the ordered product. Additional decorative items or other items shown in the product images are not included in the delivery.

Condition: used, Contour measuring device, contour measuring device, contourograph, contourograph, roughness measuring device, roughness measurement, roundness measurement, roughness probe -Manufacturer: Hommel, probe holder for roughness measuring device -Type: KVA type P2/115 Lodpfx Aek H R Huomzoah -Tactile path: s= 12 mm -Dimensions box: 345/130/H85 mm -Weight: 1.7 kg

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, OKAMOTO ACC-16*24SA1 Precision Surface Grinding Machine Okamoto Precision Surface Grinding Machine ----- Model ACC-16•24SA1 Automatic Wheelhead Approach, Retraction to Start Position, Automatic Dress Cycle with Wheel Lodpfxszmhkns Amzeah Wear Compensation, Shift Plunge Cycle--- ----- Grinding Capacity 16”x 24” Standard Accessories • Automatic Overhead Wheel Dresser • Touch Screen Controller with 10” Display With Compensation, including Diamond Tool • Vertical & Crossfeed Pulse Generator • Rapid Wheel head Retraction • Teach-Input Positioning • Load Meter for Grinding Wheel Motor • 5 HP Wheel Spindle Motor • Shift-Plunge Rough Grinding Cycle • Stainless Steel Wheel Guard • Selectable Rough/Fine Infeed Grinding Method • Leveling Bolts with Plates • Table Park for Safety • Necessary Tools & Tool Box • Stainless Steel Splash Guard • Installation and Training • Instruction Manual

Condition: used, Year of construction: 2016, functionality: fully functional, type of input current: AC, overall weight: 5,180 kg, workpiece weight (max.): 1,800 kg, input current: 46 A, input voltage: 400 V, C.M. Wheel Blast Machine T18 H850 (Year of Manufacture 2016) Product Description The C.M. Surface Treatment T18 H850 is a high-performance wheel blast machine for the economical surface treatment of workpieces. The machine is suitable for descaling, decoring, cleaning, and surface preparation prior to painting or coating. The rotating table system allows a wide variety of workpieces to be blasted evenly. The robust design and powerful turbine enable high processing quality while simultaneously ensuring efficient abrasive consumption. The system features an integrated abrasive processing system with separator, cyclone extraction, and filter system. This ensures that the abrasive is continuously cleaned and reused. Electrical Data Feature | Value Mains Voltage | 400 V Phases | 3 Frequency | 50 Hz Maximum Power | 27.78 kW Installed Total Power | 24.82 kW Operating Current | 45.46 A Working Area Feature | Value Max. Workpiece Diameter | 1,800 mm Max. Workpiece Height | 850 mm Max. Workpiece Weight | 1,800 kg Wheel Feature | Value Power | 7.5 kW Wheel Diameter | 334 mm Number of Blades | 6 Peripheral Speed | 30–70 m/s Abrasive Feature | Value Usable Grain Size | 0.1–2.0 mm Maximum Hardness | 62 HRC Initial Filling | 1,500 kg Average Consumption | approx. 500 g/kWh Filter System Ledpfx Aoz I Iv Remzjah Feature | Value Suction Capacity | 60–150 m³/min Compressed Air Consumption | 7.2 Nm³/h Filter Area | 75 m² Filter Weight | 1,100 kg Machine Weight Feature | Value Machine Weight | 5,180 kg Unladen Weight (Base Machine) | 4,080 kg Noise Level Feature | Value Sound Pressure Level (Leq) | 83 dB(A) System Components The system consists of: Cabin with rotating table Wheel Sieve Bucket elevator Separator Extraction system with cyclone Filter system Control panel / electrical system Application Areas Descaling Decoring Cleaning of steel components Surface preparation Removal of scale Preparation for painting or powder coating Shot blasting Special Features Rotating table blast machine for large workpieces Closed abrasive system Automatic abrasive processing Integrated dust extraction with cartridge filter Robust industrial design Suitable for workpieces up to 1,800 kg

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 25-1361, total length: 775 mm, total width: 550 mm, total height: 775 mm, overall weight: 100 kg, input voltage: 380 V, warranty duration: 24 months, nominal power: 0.34 kW (0.46 HP), power: 0.35 kW (0.48 HP), workpiece length (max.): 525 mm, Equipment: CE marking, documentation/manual, emergency stop, ZTV 50 Trough type vibratory machine * Highly wear resistant P.U.Lining (90 Shore) * High performance three phase current drive motor. (Italian OLI Brand – 0,34 kW) * Changeable valve for the wastewater decharging * Control panel(EU Standarts) included Laedpfx Amswb Hhdezjh * Main swicth and emergency stop switch. * Timer and working hours timer * CE safety standard * Dosing pump included. * The machine has noise isolation lid and metal machine cabinet - The cover is controlled by hand manually - The sound isolation cover provides significant noise reduction when the finishing process is in play. - It also curbs water or finishing compounds spillage from the vibratory finishing machine.

Condition: good (used), Year of construction: 2001, functionality: fully functional, grinding length: 450 mm, grinding width: 150 mm, total height: 2,129 mm, total length: 1,940 mm, total width: 1,317 mm, workpiece weight (max.): 120 kg, grinding height: 510 mm, grinding wheel diameter: 205 mm, distance table to spindle center: 510 mm, table length: 510 mm, table load: 120 kg, type of input current: three-phase, table width: 150 mm, overall weight: 1,250 kg, grinding spindle motor power: 1,500 W, travel distance X-axis: 530 mm, travel distance Y-axis: 175 mm, rotational speed (max.): 2,400 rpm, grinding spindle speed: 2,400 rpm, input voltage: 400 V, Equipment: rotational speed infinitely variable, 2001 Okamoto ACC-450DXA Surface Grinder | 450 x 150mm Used 2001 Okamoto ACC-450DXA Hydraulic Surface Grinding Machine for Sale – 450 x 150mm Grinding Capacity – Automatic Grinding Cycle – Spare Grinding Wheels Included Manufacturer: Okamoto Model: ACC-450DXA Machine Type: Hydraulic Surface Grinder Year: 2001 Condition: Working Well Includes: Coolant Equipment Magnetic Chuck Cross Feed Digital Display Vertical Digital Display Wheel Guard Spare Grinding Wheels Machine Description Used 2001 Okamoto ACC-450DXA precision surface grinder available for sale. The Okamoto ACC-450DXA is a compact, high-quality hydraulic surface grinding machine designed for accurate flat and form grinding applications in precision engineering, toolrooms, mould and die shops and general manufacturing environments. The machine provides an approximate 450 x 150mm grindable surface, with 530mm longitudinal table travel and 175mm cross travel, making it particularly suitable for precision grinding of small and medium-sized components. The DXA version features an automatic grinding cycle, combining hydraulic table movement with controlled crossfeed and vertical grinding functions to provide repeatable production grinding while remaining straightforward to set and operate. This machine is supplied with a selection of spare grinding wheels. Main Specifications Manufacturer: Okamoto Model: ACC-450DXA Year: 2001 Machine Type: Precision Hydraulic Surface Grinder / Surface Grinding Machine Grinding Capacity Maximum Grindable Surface: Approx. 450 x 150mm Table Working Area: Approx. 510 x 150mm Longitudinal Travel: Approx. 530mm Cross Travel: Approx. 175mm Distance from Grinding Wheel to Table: Approx. 60–510mm Maximum Table Load: Approx. 120kg The generous longitudinal movement relative to the 450mm grinding length allows the wheel to clear the component during the grinding cycle. Grinding Wheel & Spindle Grinding Wheel Diameter: Approx. 205mm Grinding Wheel Peripheral Speed: Approx. 2,400m/min Grinding Spindle Motor: Approx. 1.5kW The spindle arrangement is designed for precision surface grinding where good finish, flatness and dimensional accuracy are required. Additional Drive Motors Hydraulic Pump Motor: Approx. 0.75kW Crossfeed Motor: Approx. 0.75kW Grinding Head Up/Down Motor: Approx. 0.4kW DXA Automatic Grinding Cycle The ACC-450DXA version is designed to provide an automatic grinding cycle, making it suitable for repetitive precision surface grinding operations. The DX-series design incorporates features aimed at both rough and finish grinding, including: Automatic grinding-cycle capability Hydraulic longitudinal table movement Powered crossfeed Powered vertical grinding-head movement Coarse and fine vertical feed Precision feed adjustment Robust saddle-type construction Hand-finished precision guideways Automatic lubrication system These features make the ACC-450DXA suitable for both one-off toolroom work and repetitive component grinding. Approximate Machine Dimensions Overall Length: Approx. 1,940mm Overall Width: Approx. 1,317mm Overall Height: Approx. 2,129mm Machine Weight: Approx. 1,250kg Laodsz Rqk Rjpfx Amzoh

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, WE OFFER AND VERY NICE CONDITION SURFACE GRINDING MACHINE READY TO WORK. MACHINE WILL BE READY FOR PICK UP IN MIDLLE OF FEBRUARY 2026 FULLY DATA IN PHOTO-TECHNICAL DETAILS TECHNICAL DATA Table surface dimensions: 700 x 1020 Max table Travel: 760 x 1150 Max Distance Center of Spindle table: 600mm Table speed Approx: 5-25 M/min Lodpfx Amjydrhgjzoah

Condition: new, functionality: fully functional, NEW CT-300 industrial screw press dewatering machine - in stock at our Chino, CA warehouse, ready for inspection and pickup. Continuous solid-liquid separation for wet organic material: food waste, fruit and vegetable pulp and pomace, brewery and distillery spent grain, juice press cake, manure, and plant fiber. The press separates out the liquid and discharges a stackable cake - most loads lose up to two-thirds of their weight before they leave your site. Ideal for SB 1383 organics compliance and cutting hauling and disposal cost. KEY SPECS - Capacity: 3 tons/hour (5 m3/h) - Motor: 15 kW / 20 HP - 480V, 3-phase (440V compatible) - Screw speed: 25 RPM - Wedge-wire screen, 0.75 mm slot (0.5 and 1.0 mm spares available) - Discharge cone: hydraulic or pneumatic adjustable back-pressure Ljdpfj Adyk Esx Amzoah - Footprint: 163 x 35 x 77 in - Weight: 5,000 lbs WHY ZEN SURFACE LLC - Machinery supplier at a fraction of US-built separator prices - FREE live demo: bring your material and watch it run before you pay - Full range in stock or built to order: CT-160 to CT-600 (0.5 - 15 tons/hr) - NEW: GS-1200 twin-shaft shredders - ask about a complete shred + press line Local pickup in Chino, CA. Freight can be arranged anywhere in the US. Message us through this listing for details, pricing and a live material demo.

Condition: reconditioned (used), Year of construction: 1990, operating hours: 10 h, functionality: fully functional, machine/vehicle number: S3370, type of input current: three-phase, CM M1500 Shot Blasting Machine CM S 3370 Maximum product dimensions: - Maximum product height: 1500 mm (measured under the hook) - Maximum diameter: Ø 1200 mm - Maximum weight: 700 kg - Equipped with 2x load-bearing hooks - 3x Turbine Ø 330 mm, 6-blade configuration - 3x Turbine: 1450 / 950 RPM – 5.7 kW / 4.1 kW Dahlander motors - Hook movement manual - Automated hook feed into the machine - Automated door operation - Fully overhauled CM shot blasting installation Lsdpfx Amoxqzmkezoah Mechanical and electrical systems have been completely refurbished to specification: Mechanical: - Motors & drives completely disassembled, fitted with new bearings and new seals - Blast cabin fully overhauled (sheet metal and doors), cabin prepared for manganese steel armor plates (hook brackets provided); cabin comes standard with original rubber lining, manganese steel armor as an optional extra - All augers replaced and fitted with HARDOX auger flights - All auger bearings replaced - Abrasive media elevator fitted with new elevator belt, return wheels & bearings - All chain drives & sprockets replaced - Hook feed system to machine modernized - Hook drive system completely overhauled - Compressed air supply replaced - Pneumatic cylinders & valves renewed/overhauled - 3x turbines fitted with new wear parts and new turbine wheels Ø 330 mm Electrical: - Machine fitted with 3x Turbine Ø 330 mm with dual-speed control (2-speed motors) - Siemens electric motors preventively rewound & tested, fitted with new bearings - Electrical control system completely replaced by SIEMENS S7-1200 PLC & control panel - Electrical control panel completely renewed with new relays, fully compliant with 2023 standards - Fitted with 3x SKF servo-controlled abrasive dosing systems. Abrasive supply is infinitely adjustable via the control panel for effortless switching within the two-speed blasting process - Equipped with Pilz safety equipment for turbines and moving parts, including emergency stop circuits The machine is fully operational and available for immediate sale. The machine can be fully tested at our facility in Soerendonk (test runs without abrasive media). 1-year warranty on the machine (excluding wear parts) when sold within the Netherlands.

Condition: new, functionality: fully functional, NEW CT-400 industrial screw press dewatering machine - in stock at our Chino, CA warehouse, ready for inspection and pickup. Continuous solid-liquid separation for wet organic material: food waste, fruit and vegetable pulp and pomace, brewery and distillery spent grain, juice press cake, manure, and plant fiber. The press separates out the liquid and discharges a stackable cake - most loads lose up to two-thirds of their weight before they leave your site. Ideal for SB 1383 organics compliance and cutting hauling and disposal cost. KEY SPECS - Capacity: 5 tons/hour (8-10 m3/h) - Motor: 30 kW / 40 HP - 480V, 3-phase (440V compatible) - Screw speed: 20 RPM - Wedge-wire screen, 0.75 mm slot (0.5 and 1.0 mm spares available) - Discharge cone: hydraulic or pneumatic adjustable back-pressure - Footprint: 177 x 39 x 79 in - Weight: 7,050 lbs WHY ZEN SURFACE LLC - Machinery supplier at a fraction of US-built separator prices - FREE live demo: bring your material and watch it run before you pay - Full range in stock or built to order: CT-160 to CT-600 (0.5 - 15 tons/hr) Lajdpo Adyk Sjfx Amzeh - NEW: GS-1200 twin-shaft shredders - ask about a complete shred + press line Local pickup in Chino, CA. Freight can be arranged anywhere in the US. Message us through this listing for details, pricing and a live material demo.

Condition: new, functionality: fully functional, GS-1200 twin-shaft industrial shredder - low-speed, high-torque size reduction for the tough material that chokes single-shaft machines and hammer mills. Laodpfx Ame Adylpjzsh Two counter-rotating shafts with 48 intermeshing shear cutters pull material in and cut it down - no daily sharpening, no babysitting. PLC control reverses the shafts automatically if a hard object jams the chamber. KEY SPECS - Cutting chamber: 47 x 24 in (1,200 x 600 mm) - Cutters: 48 rotary shear cutters, 9CrSi alloy tool steel - Motors: 2 x 30 kW (60 kW total / 80 HP) - Capacity: approx. 5 tons/hour, depending on material - Footprint: 159 x 71 x 91 in - hopper can be customized RUNS ON: food and organic waste, green waste and plant fiber, wood and pallets, plastics, rubber and bulky solids. Pair it with our CT Series screw presses for a complete shred + dewater line - one supplier, one responsibility. A working shredding video is included with this listing package. Built to order - electrical built to your plant (480V or 440V, 3-phase, 60 Hz). Full spec sheet available, just ask. ZEN SURFACE LLC. Message us through this listing for details, pricing and a live material demo.

Condition: new, functionality: fully functional, NEW CT-200 industrial screw press dewatering machine - in stock at our Chino, CA warehouse, ready for inspection and pickup. Ledpfxj Adykxe Amzjah Continuous solid-liquid separation for wet organic material: food waste, fruit and vegetable pulp and pomace, brewery and distillery spent grain, juice press cake, manure, and plant fiber. The press separates out the liquid and discharges a stackable cake - most loads lose up to two-thirds of their weight before they leave your site. Ideal for SB 1383 organics compliance and cutting hauling and disposal cost. KEY SPECS - Capacity: 1 ton/hour (1-2 m3/h) - Motor: 5.5 kW / 7.5 HP - 480V, 3-phase (440V compatible) - Screw speed: 30 RPM - Wedge-wire screen, 0.75 mm slot (0.5 and 1.0 mm spares available) - Discharge cone: hydraulic or pneumatic adjustable back-pressure - Footprint: 102 x 30 x 55 in - Weight: 1,500 lbs WHY ZEN SURFACE LLC - Machinery supplier at a fraction of US-built separator prices - FREE live demo: bring your material and watch it run before you pay - Full range in stock or built to order: CT-160 to CT-600 (0.5 - 15 tons/hr) - NEW: GS-1200 twin-shaft shredders - ask about a complete shred + press line Local pickup in Chino, CA. Freight can be arranged anywhere in the US. Message us through this listing for details, pricing and a live material demo.

Condition: new, Year of construction: 2026, functionality: fully functional, grinding length: 1,500 mm, grinding width: 300 mm, total length: 3,000 mm, total width: 1,000 mm, grinding height: 150 mm, grinding wheel diameter: 300 mm, table length: 1,500 mm, table width: 200 mm, overall weight: 2,500 kg, grinding spindle motor power: 11,000 W, grinding spindle speed: 1,450 rpm, grinding wheel speed: 1,450 rpm, Equipment: documentation/manual, The GRAFS GRfix-1500e is a heavy-duty surface grinding machine designed for rough and high-performance grinding of steel plates. Developed and manufactured entirely in Poland, this model combines robust construction, long service life, and user-friendly electronic control. Main features: - Electromagnetic table 300×1500 mm, S-pole, holding force 120 N/cm² - Grinding motor 11 kW, high-quality Polish production - Segmented grinding wheel Ø300 mm, 6 aluminium oxide segments - Laser sensor for automatic workpiece height detection (as an additional option) - PLC control (Mitsubishi) with 7” HMI touchscreen – programmable grinding cycles (rough pass, automatic downfeed 0.001–0.05 mm, spark-out, pause, auto-stop) - Stepper motor feed with encoder for precise vertical adjustment - Mitsubishi inverter – variable carriage speed 1–16 m/min - Remote diagnostic support via Internet (Wi-Fi connection) - External coolant filtration system MS60 with rotary magnetic drum separator, 150 L tank, and 60 L/min pump - LED 24V working light and internal coolant pipe for table flushing - Powder-coated body: RAL7012 (frame) / RAL7021 (carriage) Mechanical design: - Extremely rigid welded steel body (10 mm thick plates, stress-relieved) - Carriage on PWTR precision rollers for smooth and silent motion - Replaceable hardened steel guide strips - Quick manual positioning of the carriage above the workpiece - Fast up/down movement of the spindle motor for easy tool change - Easy mounting system for the grinding wheel – only three bolts - Maximum workpiece height: 150 mm Ledpfoxmhyisx Amzjah Optional equipment: - Accordion-type bellows covers - Alternative coolant filtration units (magnetic, paper, or combined) Advantages: - Perfect for rough surface grinding of large steel plates - Designed for high efficiency and long-term stability - Fully European components – Mitsubishi Electric control system - CE conformity, electrical inspection and Polish technical documentation (DTR) included Warranty: 12 months Technical data summary: Parameter Specification Grinding table: 300 × 1500 mm (electromagnetic, S-pole) Max. workpiece height: 150 mm Grinding wheel: Ø300 mm, 6 segments Spindle motor power: 11 kW Carriage speed: 1–16 m/min Downfeed: Automatic 0.001–0.05 mm Control system: PLC + 7” HMI Mitsubishi Coolant system: MS60 magnetic separator, 150 L tank, 60 L/min pump Weight: ~2800 kg (depending on configuration) Power supply: 400V / 50Hz Made in Poland The GRAFS GRfix-1500e is a professional surface grinder built for intensive, rough grinding applications where high metal removal rate and long-term precision are essential. A reliable, industrial-grade solution for steel fabrication shops, tool manufacturers, and service centers.

Condition: used, Instron Wolpert V-Testor 4562 Low-Load and Microhardness Tester High-quality and extremely robust low-load hardness tester from the renowned manufacturer Instron Wolpert, model V-Testor 4562 (V-Testor 2 series). These mechanical-optical precision instruments are known for their exceptional durability and reliability in material testing, metallography, and quality assurance. The device is ideally suited for hardness tests according to the Vickers method (HV) in the low-load range. Application area: It is typically used to determine the hardness of thin films, surface structures, small precision parts, or metallographic samples in laboratories and for quality assurance. Technical data & details: Lajdpfxezniayo Amzeh Manufacturer: Instron Wolpert GmbH Model: V-Testor 4562 Testing method: Vickers (low-load range) Optics: Integrated precision measuring microscope for evaluating the indentations Application area: Hardness determination of metals, thin films, and surface structures You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: ready for operation (used), Year of construction: 2024, TECHNICAL DETAILS General Information Manufacturer: Mahr Model: MarSurf XP 20 Professional – Series 1000 Machine Type: CNC surface and contour measuring station Year of Construction: 2024 Condition: used Measuring and Feed System Feed Unit: MarSurf LD 130 Feed Length: 130 mm Standard Measuring Stroke Z: 13 mm Stylus Arm Changer: up to 10 stylus arms CNC Positioning System Positioning System: 4-axis CNC workpiece positioning system Swiveling Axis: ±135° Rotating Axis: ±170° Linear Axis X: 400 mm Linear Axis Y: 400 mm Lodpoz S D Aiefx Amzoah Positioning Accuracy X/Y/Z: approx. ±250 µm Measuring Station and Machine Design Measuring Table: Hard stone measuring table Vibration Isolation: mechanical-pneumatic Measuring Column: CNC measuring column Touchscreen: 17 inches Control Cabinet: present Protective Enclosure: sound-insulated Software and Control Control: LD control Measuring Software: MarWin Professional Contour & Roughness Plus CNC Software: CNC-Plus Q-DAS Interface: QS-STAT Plus Operating System: Windows 10 IoT Enterprise RAM: 32 GB Industrial PC: Dell Dimensions Enclosure Width: 1,450 mm Enclosure Depth: 1,300 mm Enclosure Height: 2,270 mm EQUIPMENT Adapter Plate X/Y/Z Offset Manual Chuck DM28 Signal Tower Stylus Arm Set Additional Stylus Arm Complete technical documentation in digital form Complete technical documentation in paper form

Condition: new, functionality: fully functional, NEW CT-160 industrial screw press dewatering machine - in stock at our Chino, CA warehouse, ready for inspection and pickup. Continuous solid-liquid separation for wet organic material: food waste, fruit and vegetable pulp and pomace, brewery and distillery spent grain, juice press cake, manure, and plant fiber. The press separates out the liquid and discharges a stackable cake - most loads lose up to two-thirds of their weight before they leave your site. Ideal for SB 1383 organics compliance and cutting hauling and disposal cost. KEY SPECS - Capacity: 0.5 tons/hour (1 m3/h) - compact pilot / small-operation model - Motor: 3 kW / 4 HP (electrical built to order) - Screw speed: low-speed high-torque design - Wedge-wire screen, 0.75 mm slot (0.5 and 1.0 mm spares available) - Discharge cone: adjustable back-pressure - Footprint: 56 x 17 x 58 in - Weight: 700 lbs WHY ZEN SURFACE LLC - Machinery supplier at a fraction of US-built separator prices - FREE live demo: bring your material and watch it run before you pay - Full range in stock or built to order: CT-160 to CT-600 (0.5 - 15 tons/hr) - NEW: GS-1200 twin-shaft shredders - ask about a complete shred + press line Laedpfxs Adykrj Amzsh Local pickup in Chino, CA. Freight can be arranged anywhere in the US. Message us through this listing for details, pricing and a live material demo.

Condition: excellent (used), The DAGE Series 4000 Bond Tester is a professional device designed for performing Bond Pull and Die Shear tests in the semiconductor and electronics industries. This device is used in quality control laboratories, research and development departments, and during the production of microelectronic components. This unit is equipped with a precision positioning table, joystick controls, a keypad panel, and work lighting. The set also includes the original PCI control card (Baldor NextMove PCI-2 Motion Control Card) and additional electronic components visible in the photos, which are a valuable addition to the set. Technical data: Manufacturer: DAGE (Nordson DAGE) Model: DAGE Series 4000 Bond Tester Year of manufacture: 2010 Power supply: 110 / 230 V AC, 1-phase Frequency: 50/60 Hz Ljdpsz Snf Njfx Amzjah Power: 250 VA Control: joysticks and keypad Precision XY positioning table Required compressed air: 4 bar (oil-free) Vacuum connection Excellent visual condition. The set being sold is consistent with the presented photos and includes all visible components, including the additional PCI control card.

Condition: excellent (used), Electrical safety tester from the renowned German manufacturer Gossen Metrawatt The SECUTEST Pro model is designed for testing electrical devices in accordance with the IEC 62353 standard. The set includes several devices along with measuring leads and carrying bags. TECHNICAL DETAILS Manufacturer: Gossen Metrawatt Model: SECUTEST Pro Standard: IEC 62353 Power supply: 230 V Professional tester for electrical device safety SET INCLUDES Several testers Measuring cables Lsdpfxjz Slxge Amzjah Adapters Carrying bags Exact condition as shown in the photos APPLICATIONS Testing of electrical devices Service and maintenance Safety inspections Medical and industrial use CONDITION Used Visually in good condition Technical condition not fully checked IMPORTANT Sale as a set as shown in the photos No additional accessories except those pictured SHIPPING

Condition: used, Vickers Type: HVS 1000 The digital micro-Vickers hardness tester HVS 1000 features a unique and precise design in the areas of mechanics, optics, and light source, and is capable of producing a clearer image of the indentation, resulting in more accurate measurements. Main purpose and scope of application: 1. Iron and steel, non-ferrous metals, metal foils, hard alloys, sheet metal, microstructures 2. Carburized, nitrided, and decarburized layers, surface hardening layers, plating, coatings 3. Glass, wafers, ceramic materials Specifications: Model HVS1000 Type Digital micro-hardness tester Test forces (N) 0.098 / 0.246 / 0.49 / 0.98 / 1.96 / 2.94 / 4.90 / 9.80 Test forces (Kgf) 10 / 25 / 50 / 100 / 200 / 300 / 500 / 1000 Load control Automatic loading and release Objective-indenter turret Manual Dwell time (s) 0~60 Microscope magnification x 400x for measurement, objective 40x, eyepiece 10x 100x for observation, objective 10x, eyepiece 10x Micrometer resolution (μm) 0.01 Test range 5 HV~3000 HV Dimensions of the XY test table 100X100 mm Travel range of the XY test table 25X25 mm Max. specimen height 120mm Max. specimen width 110mm Hardness conversion HK, HRA, HRB, HRC, HRD, HR15N, HR30N, Lasdpfx Aszgbr Ssmzjh HR45N, R15T, HR30T, HR45T, HV, HBW Output Built-in printer, RS232 interface Power 220V, 60/50Hz Dimensions (mm) 441 x 270 x 480 Net weight (/ kg) 35 Condition: used / defective, for spare parts Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, Year of construction: 1960, functionality: fully functional, x-travel 500 mm Ledpjzkbqiefx Amzsah breite 450 mm serial number 386 weight of the machine ca. 1,8 t