Used Table Eccentric Press With Protective Screen for sale (40,151)

Condition: good (used), Pressing force: approx. 10 tons Table size: 500 x 300 mm (W x D) Pedal size: 110 x 105 mm (W x D) Installation height: approx. 150 mm (large stroke at the top) Stroke: 5...29 mm Pedal adjustment: 25 mm Other • Rotating wedge coupling Nwodpfxsvnrhwe Aa Hok • Foot release • Control and protective screen as new, only used very little • Without table

Condition: used, Two eccentric presses are offered. 1) ETH 3 eccentric press, pressing capacity: 30000kg, cutting area for material with 45kg strength: 665mm², ball screw adjustment: 40mm. Including protective cover and separate control cabinet. 2) An eccentric press with C-frame design, design: C-frame with flywheel, die clamping: hydraulic clamping device on the table. Including safety enclosure. An on-site inspection is possible. Nodpezvy Hajfx Aa Howk

Condition: used, Single-column – Eccentric press RICHTER Type PEKRS 80 Year of manufacture 1970 – Overhauled in 2024 Clamping force 80 tons Reach 350 mm Table size 900 x 650 mm Through-hole in the mounting table Ø 200 mm Ram area 700 x 500 mm Stroke rate 70 strokes/min Stroke adjustment 6 – 100 mm Ram adjustment 85 mm Installation height max. 400 mm Arbor hole Ø 50 mm Table height above floor 810 mm Motor power 8 kW Power connection 400 volts, 50 Hz - Pneumatic clutch-brake combination ORTLINGHAUS - Press safety valve HERION XSz 32 Nsdpoi Db Ibsfx Aa Hewk - Pneumatic ram balancing cylinders - Overload protection with shear plate in the ram - Grease central lubrication with hand pump Space requirement L x W x H 1800 x 1250 x 2830 mm Weight 5.7 tons Very good condition Technically overhauled and converted to the latest safety standards with new electrical system Control system rebuilt in 05/2024 – suitable for manual feeding operations – in accordance with DGUV Information 209-030 Press Inspection and Machinery Directive 2006/42/EC Low Voltage Directive 2014/35/EU EN ISO 16092-1: Safety of machinery - Presses - Part 1: General safety requirements EN ISO 16092-2: Machinery - Safety of presses - Part 2: Mechanical presses - Control system with plain text error messages and diagnostic screen for quick fault localization - New electrical cabinet, mounted on the side of the machine - Completely based on SIEMENS, with S7-1200 PROFIsafe PLC and 7" TFT touch display - Two-hand control panel with emergency stop and interlocking - Electric foot switch - Cam mechanism with run-on monitoring - Stroke release via press safety valve HERION XSz 32 with pneumatic pressure gauge - Rewiring of the machine - Updated operating manual The machine is equipped with 6 operating modes: 1 = Setup 2 = Single stroke, two-hand 3 = Single stroke, foot 4 = Continuous operation, foot 5 = Automatic continuous operation 6 = Reverse operation

Condition: used, Single-column eccentric press WEINGARTEN type E 40 Machine. No. 643/62 Year of construction 1963 Nwjdotx E Rqspfx Aa Hsk Pressure capacity 40 ton. throat depth 250 mm Table opening 150 x 80 and Ø 200 mm Table surface 560 x 460 mm ram surface 250 x 200 mm Plunger stroke adjustable 8-88 mm Plunger adjustment 63 mm Installation height 320 mm Clamping pin bore Ø 40 mm Stroke rate 100/130 strokes / min. Motor power 2.2 / 3 kW Mains connection 400 Volt, 50 Hz Table height above floor 840 mm - Clutch/brake combination with WEINGARTEN friction threaded clutch with TDC run-through protection - Electric lift release via two-hand control - Overload protection by breaker plate - Manual central grease lubrication - Front crankshaft support bearing - Control cabinet adjacent - UVV for manual insertion work Space requirement L x W x H 1800 x 1500 x 2200 mm Weight 3.1 tons

Condition: used, Single-column toggle press MAY - MAYPRES - KOMATSU Type MKN 1-63/6 Eccentric toggle press, eccentric press Year of manufacture approx. 1984 Pressing force 60 tons Thrust 160 mm Table size 580 x 360 mm Ram surface Ø 270 mm Clamping pin bore Ø 40 mm Distance between columns 218 mm Ram stroke 60 mm Ejector stroke 15 mm Nwsdpjv Uraaefx Aa Hek Ram adjustment travel 30 mm Max. installation height 300 mm (with intermediate table plate) Stroke rate 70 strokes per minute Motor speed 1400 rpm Motor power 3 kW Power supply 380 V, 50 Hz - Pneumatic clutch and mechanical brake with pneumatic release (separate clutch-brake combination) - Table intermediate plate L x W x H 580 x 360 x 58 mm, with holes and cutouts - Mechanical ejector, ejector device in the machine table, Ø 80 mm - Electric two-hand control and foot switch - Movable safety screen, UNIDOR protective housing with pneumatic front screen - BALLUFF cam switch Space requirement L x W x H 1400 x 1200 x 1850 mm Weight 3 tons Good condition

Condition: used, Year of construction: 2019, machine/vehicle number: M01645/400/23/051/19, functionality: unexamined, power: 75 kW (101.97 HP), Schuler, Type: Eccentric press MC400, Machine No. M01645/400/23/051/19, Year of manufacture 2019, 4000 kN Technical data of the press according to the nameplate: Supply voltage: 3LNPE/400V/50Hz Control system: CCS/PNOZmulti Fuse rating: 250 A Rated power: 75 kW Rated force: 4,000 kN Work capacity: 60,000 J Max. strokes in continuous operation: 20-80 strokes/min Nwjdpfx Aozvcgpsa Hsk Max. strokes in single-stroke operation: 30 strokes/min Max. clutch cycles in single-stroke operation per minute: 20 Post-travel time: 0.20 sec Min. safety distance: 322 mm Min./max. clutch pressure: 5.5/6.0 bar System pressure: 6.0 bar Stroke lengths: 40-315 mm Maximum ram adjustment: 200 mm Standard connection point of the ram: OU Max. installation space, largest stroke in UU: 750 mm Table dimensions: 3000 x 1400 mm Max. tool dimensions: 3000 x 1300 mm Max. weight of tool upper part: 2,800 kg Weight without additional equipment: 72,000 kg Strip feeding system consisting of: GSW Schwabe, Type: MHR 5/2000, Serial No. M 2018-01118, Year of manufacture 2019 GSW Schwabe, Type: RMA 50/79, Serial No. M 2018-01119, Year of manufacture 2019 Including hydraulic unit, enclosure, and roller conveyor GSW project no.: 2018-60420 with peripherals: - SCHÄFER lubricant supply system with tank - RAZIOL EST-10-D ELS-400, Year of manufacture 2018 - Conveyor belt - GÜTHLE ACT10F2000/2400N, Set of 2, Year of manufacture 2019 - Control cabinet Function and technical data have not been verified. Without further items/without further accessories, unless explicitly specified as part of the item. If interested, please contact us by email.

Condition: new, Year of construction: 2026, power: 15 kW (20.39 HP), pressing force: 200 t, table width: 800 mm, table length: 1,100 mm, punching force: 200 t, drop-through hole in table: 220 mm, ram bore: 60 mm, stroke adjustment: 180 mm, warranty duration: 24 months, Equipment: safety light barrier, An eccentric press is a type of mechanical press that operates by force generated through an eccentric mechanism in cold forming operations such as punching, cutting, and die forming. Thanks to its high production speed and repeatability, it offers an efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type 200 Ton Eccentric Press is engineered for stable operation in cold forming applications. Its rigid steel frame construction, pneumatic clutch-brake system, and CE-compliant safety infrastructure ensure reliable performance suitable for high-volume production. Key Advantages: - Consistent stroke performance and high repeatability in mass production - Operator-focused safety design (light curtain + safety systems) - Low maintenance requirement with central automatic lubrication - Production-ready operation with PLC control + dual-hand/foot control Application Areas: - Cold cutting and punching operations - Cold shearing applications - Metal forming with dies - High-volume production lines ✅ STANDARD FEATURES • Steel frame construction • Four-way guided slide • Spheroidal cast iron connecting rod and gear bearings • Crankshaft and drive shafts made of 4140 tempered steel • Central fully automatic grease lubrication system • Pneumatic clutch and brake combination • CE safety directives compliant • Dual-coil safety valve • Manually adjustable stroke • Light curtain finger–hand protection safety system • PLC control system • Dual-hand/foot control system • Mechanical safety system • Emergency reverse motor operation • Complies with occupational safety regulations • CE standards compliant ✅ OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD control panel (standard on 150–300 ton models) • Hydraulic safety system (standard on 200–300 ton models) • Spare bolster plate • Decoiler, feeder, and straightener • One die set in requested specifications • Eight-sided slide guidance ✅ TECHNICAL SPECIFICATIONS (200 TON) Capacity: 200 Tons Throat depth: 340 mm Distance between table and slide: 500 mm Distance between slide and table: 600 mm Width between uprights: 510 mm Slide adjustment (shut height adjustment): 130 mm Approx. press width: 1900 mm Approx. press depth: 2400 mm Approx. press height: 3000 mm Front anchoring dimension: 920 mm Side anchoring dimension: 1420 mm Table hole diameter: Ø240 mm Table dimensions: 680×1000 mm Die clamping hole diameter: Ø60 mm Slide dimensions: 620×350 mm Table height from floor: 805 mm Stroke adjustment: 20–140 mm Strokes per minute: 50 spm Motor power: 18.5 + 0.75 kW Motor speed: 1450 rpm Approximate weight: 9200 kg Note: Please inform us if you require changes to the technical specifications. Nwodpfx Aajvtyx Io Hok ✅ PRODUCTION / SUPPLY NOTE: This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Condition: used, Single-column eccentric press BERRENBERG Type EPtG 20-325 N-0 Mach. No. 15342, Year of manufacture 1974 Pressing force 20 tons Projection 320 mm Table surface 550 x 350 mm Through hole in table 190 x 120 mm Push surface 305 x 140 mm Njdpfx Aajv Tp D Hj Hswk Table intermediate plate L x W x H 540 x 340 x 55 mm Through hole in table intermediate plate Ø 103 mm Clamping pin bore Ø 40 mm Stroke adjustment 8 - 70 mm Push adjustment 35 mm Installation height max. 345 mm (without table intermediate plate) Installation height max. 290 mm (with table intermediate plate) Table height above floor 700 - 750 mm (without table intermediate plate) Stroke rate 100 to 180 strokes/min. Drive power 1.5 kW Power supply 380 V, 50 Hz - Pneumatic clutch-brake combination, manufacturer: ORTLINGHAUS - Electric foot switch and two-hand operation - Stroke rate continuously adjustable via variator drive - Table height adjustment via threaded spindle approx. 150 mm - Manual central grease lubrication BEKA Schmiertechnik - Height-adjustable press table via threaded spindle - Electrical diagram Space requirement L x W x H 1600 x 850 x 1950 mm Weight 1250 kg Good condition

Condition: new, Year of construction: 2026, power: 15 kW (20.39 HP), pressing force: 150 t, stroke length: 125 mm, table width: 660 mm, table length: 920 mm, throat depth: 320 mm, ram plate width: 290 mm, ram plate length: 600 mm, total length: 1,600 mm, total width: 2,280 mm, total height: 2,750 mm, overall weight: 7,100 kg, Equipment: CE marking, documentation/manual, safety light barrier, CRONOSSTECH CECP 150 | 150 Ton C-Type Eccentric Press | Heavy Industry Sheet Metal Cutting and Forming Machine From CRONOSSTECH, Turkey's reliable press machine manufacturer: a 100% CE certified 150 Ton C-Type Eccentric Press for cutting, punching, and heavy cold forming operations on thick sheets. With its reinforced, rigid steel frame, it offers industrial solutions with minimal deflection, maximum work safety, and flawless stroke accuracy in heavy-duty industrial production lines. Key Advantages for Your Industrial Production: High Durability and Repeatability: Perfect part quality and long die life thanks to its steel construction that remains stable during heavy-tonnage strokes. Nwedpfx Aozwt Nwea Hok Maximum Work Safety: Operator safety-focused design with beam barrier, double-coil safety valve, and mechanical fuse. Low Maintenance Costs: Continuous and trouble-free operation thanks to the central, fully automatic grease lubrication system. Smart Control (Standard): Fast recipe management and commissioning with advanced PLC infrastructure and the Touchscreen LCD display offered as standard. Application Areas: Cutting, punching, and blanking operations on thick sheets Cold shearing and heavy metal forming applications Automotive, white goods, and heavy industry production lines ✅ STANDARD EQUIPMENT Steel construction, rigid frame structure Guide system with bearings on 4 surfaces Spheroidal cast iron connecting rod and bearing housings 4140 heat-treated steel crankshaft and transmission shafts Pneumatic clutch and brake combination Touchscreen LCD display and PLC control system Manually adjustable stroke and mechanical fuse Dual hand/foot control system Emergency reverse motor movement Full compliance with CE standards and occupational safety regulations ✅ OPTIONAL FEATURES Anti-vibration industrial pads Hydraulic fuse system Spare table Roll sheet uncoiler, driver, and straightener integration 8-bearing slide system Project-specific 1 set of die design and production ✅ TECHNICAL SPECIFICATIONS (150 TON) Capacity: 150 Ton | Motor Power: 15 kW (1450 rpm) | Stroke Rate: 42 strokes/min Table Size: 660×920 mm | Ram Size: 600×290 mm Throat Depth: 320 mm | Stroke Adjustment: 10–125 mm Ram Adjustment: 120 mm | Table Hole Diameter: Ø220 mm Table-Ram Distance: 500 mm | Slide-Table Distance: 540 mm Distance Between Columns: 500 mm | Floor-to-Table Height: 805 mm Die Clamping Slot Diameter: Ø55 mm Front / Side Anchorage Dimensions: 840 mm / 1300 mm External Dimensions (W x D x H): 1600 x 2280 x 2750 mm Approximate Weight: 7100 kg (Note: Please inform us if you have any technical modification requests specific to your production line.) ✅ MANUFACTURER'S GUARANTEE This machine is manufactured in Turkey with CRONOSSTECH engineering. Global exports, commissioning, and all post-sales technical support processes are directly managed by our expert team.

Condition: excellent (used), Eccentric press Inventory no. 3341 Manufacturer: Ter Hart Type: EP 13 * Pressing force: 13 tons * Stroke adjustment: 5 - 50 mm * Adjustable ram: 35 mm * Table dimensions: 330 x 230 mm * Installation height: 200 mm * Overhang: 115 mm * Foot/hand operation (guard) * Protective guard (hand) Nwjdszi Erhjpfx Aa Hek * Weight: 520 kg

Condition: excellent (used), Year of construction: 2022, machine/vehicle number: 04H200001A220067, functionality: fully functional, power: 18.5 kW (25.15 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 200 t, stroke length: 400 mm, table width: 740 mm, table length: 800 mm, distance table to ram: 444 mm, clearance between the columns: 2,826 mm, overall weight: 12,500 kg, Equipment: CE marking, safety light barrier, We are offering this well-maintained Dirinler 1000C-2000 P61 eccentric press, year of manufacture 2022. Year of manufacture: 2022 Nominal pressing force: 2000 kN Distance between table and ram: 444 mm Stroke length: 25–400 mm Stroke rate: 50–70 min⁻¹ Max. ram adjustment: 102 mm Clutch-brake unit pressure: 5.5 bar Njdpfx Aajy Icnme Hswk Table dimensions: 800 × 740 mm Power supply: 3/N/PE 400 V 50 Hz Control voltage: 24 V Motor power: 18.5 kW Max. flywheel speed: 32 min⁻¹ Max. allowable upper tool weight: 2000 kg Machine weight: 12,500 kg Sound level: 75 dB(A) Overrun time: 182 ms Overrun distance: 52 mm Safety distance: 2826 mm Protection class: IP54 If you have any questions or require further information, please contact us via message or phone.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, overall weight: 2,900 kg, input voltage: 400 V, power: 4 kW (5.44 HP), type of input current: three-phase, Eccentric press PRESSIX 40T Model 40CNV4 Serial No 40/2/88/03 MAchine weight _ 2900 kg Inverter for speed change. Variable speed 60/180 rpm High number of strokes per minute Slider with 4 bronze guides Automatic and centralized lubrication Hydraulic release Nwodpfx Asyn Rhyja Hek Pneumatic clutch-brake group Adjustable stroke length using a toothed ring Balancing cylinders Slider adjustment mm 70 Closing height mm 240 Table surface mm 480 x 650x53 Table opening mm 120 Slider surface mm 300 x 370 Hole in the slider mm 50 Power kW 4 User manual and electrical installation in English. Machine in excellent condition. Used for small batches of automatic production. Total: 6,500,000 strokes Programs: tool adjustment, semi-automatic work, auto, automatic work, two-handed work, work with a pedal, turning the mortar in the opposite direction Dismantling and loading are charged additionally

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 3,100 kg, input voltage: 400 V, total length: 950 mm, total width: 1,460 mm, total height: 2,380 mm, Special Offer – 5% Discount Available! 25T Open Back Eccentric Press The 25T Open Back Eccentric Press is a professional industrial machine designed for punching, stamping, bending and forming metal components. Its rigid open back frame provides excellent accessibility to the working area while ensuring high stability, precision and operator comfort. The machine features a transversely mounted crankshaft, dry pneumatic friction clutch and advanced safety systems for reliable, efficient and safe operation. Its robust construction makes it suitable for continuous industrial production. Main Features * Open back frame design * Heavy-duty steel construction * Fixed working table * Transversely mounted crankshaft * Dry pneumatic friction clutch * Adjustable slide stroke * Slide balancing device * Integrated safety valves * Manual controls * High productivity * CE certified Technical Specifications * Press force: 25 t * Stroke under nominal load: 3 mm * Slide stroke: 10–110 mm * Strokes: 80–120 strokes/min * Maximum die height: 250 mm * Die height adjustment: 50 mm * Throat depth: 210 mm * Distance between frame columns: 450 mm * Working table: 700 × 400 mm * Table thickness: 80 mm * Outer table hole diameter: Ø170 mm * Table hole depth: 20 mm * Inner table hole diameter: Ø150 mm * Slide surface: 360 × 300 mm * Punch hole diameter: Ø40 mm * Punch hole depth: 60 mm Nwjdsytcvgspfx Aa Hsk * Motor power: 3 kW * Machine dimensions: 1460 × 950 × 2380 mm * Machine weight: 3100 kg Standard Equipment * Light curtains * Mechanical safety guards * Lower table ejector * CE Declaration of Conformity * Technical documentation Applications * Punching * Stamping * Bending * Forming * Sheet metal production * Metal fabrication workshops * Industrial manufacturing Transport and Delivery The machine is supplied brand new and includes a 12-month warranty, warranty service and professional after-sales support. We provide professional transport throughout Europe using specialized heavy machinery logistics. Every machine is securely loaded, protected during transport and delivered directly to the customer's premises. We also assist with export documentation and international shipping arrangements. Worldwide shipping is available upon request. About Metal Technics Polska Metal Technics Polska is a manufacturer and distributor of professional metalworking machinery. We supply high-quality machines throughout Europe and provide expert technical advice, spare parts and comprehensive after-sales support. Contact us today for pricing, delivery times, machine availability, additional photos, videos or a personalized quotation.

Condition: good (used), Year of construction: 1989, functionality: fully functional, pressing force: 250 t, table width: 1,120 mm, table length: 800 mm, total length: 25,800 mm, total width: 13,500 mm, total height: 29,750 mm, overall weight: 12,800 kg, height adjustment type: mechanical, stroke adjustment: 140 mm, Equipment: documentation/manual, Eccentric Press LE 250C. Year of manufacture: 1989 (ZTS - SLOVAKIA). New control cabinet according to the original schematic, central lubrication pump. Max. pressing force: 250 tons. Stroke: 30–140 mm. Max. number of strokes per minute: 45. Slide adjustment: 110 mm. Maximum slide-to-table distance: 450 mm. Slide clamping area: 800 x 475 mm. Table clamping area: 1120 x 800 mm. Motor power: 20 kW. Dimensions (Height x Width x Length): 2975 x 1350 x 2580 mm. Weight: 12,800 kg. Nwodpfxstq Eqxo Aa Hek

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, WE OFFER AN VERY NICE CONDITION EXCENTRIC PRESS Nwedpfevlduqox Aa Hek MAX FORCE: 63TON HEIGHT 10 - 110 mm number of stroke: 140/71 weight 4500kg MACHINE WILL BE AWAILIBLE AFTER NEW YEAR

Condition: used, Year of construction: 2000, machine/vehicle number: 309661, functionality: fully functional, operating hours: 6,750 h, Offered for sale is an eccentric press Manufacturer: SCHULER / Römer GmbH Type: PN 63-250 Rated force: 630 kN Ram stroke: 8–100 mm Stroke rate: 140 strokes/min Two-hand and foot operation Separate control cabinet Used, fully functional condition. Collection by the buyer; assistance with dismantling/transport can be arranged if required. If interested or if you have any questions, please feel free to send me a message. On-site inspection by appointment is possible. Further metalworking machinery such as bench drilling machines, press brakes, pillar drills, eccentric presses, heavy-duty shelving, welding tables, MIG/MAG welding machines, compressors, etc. – please see my other listings. Collection only – dismantling and transport by the buyer or by arrangement. If you are interested or have questions, feel free to send me a message. Further photos and technical details available on request. Njdpfxsxvqmko Aa Hjwk All information subject to change and without guarantee. Errors and prior sale reserved. Nous parlons Français / Мы говорим по-русски We speak English / Noi vorbim românește Viber / WhatsApp We handle all customs and registration matters for a fee. We can deliver vehicles to the port for an additional charge.

Condition: used, Year of construction: 1987, functionality: fully functional, power: 1.1 kW (1.50 HP), overall weight: 1,500 kg, Eccentric press EBU H16 Year of manufacture: 1987, 1500 kg, 1.1 kW Location: Bad Tölz Njdszv Sl Ispfx Aa Hewk Inspection is welcome. We have other used machines available. Please contact us.

Condition: used, Year of construction: 1989, machine/vehicle number: SN: 00789901, functionality: unexamined, pressing force: 815 t, Press 1, manufacturer: Umformtechnik Erfurt GmbH, type: PKZZI 800.1/3150x1600/500E, serial number: 00789901, year of manufacture approx. 1989, 8000 kN, last service in 10/2025, machine in operation until 12/2025. Technical data of the press according to the nameplate: Press force max. 8,000 kN – at a distance in front of the die of 12.5 mm Press force 2,500 kN – at a distance in front of the die of 200 mm Stroke rate in idle 10 to 20 min-1 Stroke of the ram 500 mm Adjustability of the ram: 500 mm Strip feed system consisting of: Roller feed, manufacturer: GSW Schwabe, type VRMA80/78, machine no. 2011-60187, year of manufacture 2011 with reel 1 (sandwich processing), SAWAB reel, year of manufacture 2011 with reel 2, manufacturer: GSW Schwabe, type: LMHR1000/1100, no.: M2011-00171, year of manufacture 2011 with reel 3, manufacturer: GSW Schwabe, type: MHR5/1400, serial no.: M2011-00170, year of manufacture 2011 including enclosure GWS project no.: 2011-60187 with peripherals: - Conveyor belt - Raziol system Function and technical data not verified Nedpfx Aaezvdm Ro Hswk without additional items/without further accessories, unless explicitly stated as part of the item WE STRONGLY RECOMMEND PARTICIPATING IN THE INSPECTION! If interested, please contact us via email!

Condition: ready for operation (used), functionality: fully functional, Technical data of the press: Name: Eccentric press SCHULER Nodpfx Aasw R Tl Ts Hewk Model: PD 63 Press force: 63 tons Press dimensions L x W x H: 1800 x 1300 x 2500 mm Press weight: approximately 4500 kg Table dimensions L x W: 700 x 550 mm Table opening L x W: 265 x 265 mm Ram L x W: 320 x 300 mm Pusher stroke: 135 mm (fixed) Maximum distance of the ram from the table: 400 mm PLC components: SIEMENS SIMATIC S7-300 Pneumatic components: FESTO Commands: single (foot pedal, two-hand control), continuous (automatic mode - setting the time interval 1-99999 seconds and the number of repetitions 1-32000) A special function for determining the lower position of the ram Automatic machine lubrication Pneumatic activation and braking. Note: Two identical presses are offered (the only difference is in the size of the display: 7" and 4.3"). Technical documentation is not available. Online assistance from a programmer for PLC programming is possible. Shipping costs are additional. Urgent sale, due to a change in business, the presses are no longer needed for production, and I need more space for new equipment. The price is absolutely fixed; after March 1st, they will be disconnected from the power supply.

Condition: used, Single-column eccentric press WEINGARTEN type ARP 100 Machine no. No. 122481 Year of construction 1984 Pressure capacity 100 ton. throat 400 mm Table size 920 x 660 mm ram surface 700 x 450 mm Rear upright width 735 mm Stroke adjustment 20 - 160 mm Plunger adjustment 80 mm Installation height with 160 mm stroke max. 355 mm (without intermediate table top) Installation height with 20 mm stroke max. 425 mm (without intermediate table plate) Stroke rate 60 strokes/min. Table surface intermediate table top 920 x 610 mm Thickness of intermediate table top 90 mm Hole in intermediate table top Ø 210 / 180 mm Through-hole in machine table Ø 210 / 180 mm Table height above floor 800 mm (without intermediate table top) T-slot width in table and ram 22 mm Clamping pin bore 50 mm Motor power 11 kW Mains connection 400 Volt, 50 Hz Nodpou Rwa Isfx Aa Howk - Hydraulic overload protection in ram - ORTLINGHAUS pneumatic clutch/brake combination - Electromotive ram adjustment with counter - Clamping pin bore with clamping piece - Front crankshaft support bearing - Gear reduction gears in closed oil bath gearbox - Two pneumatic tappet compensation cylinders - WOERNER automatic central grease lubrication - Lift release via electric foot switch or two-hand control panel - Electrical control cabinet permanently attached to the machine - Operating instructions and circuit diagram - UVV for manual insertion work Space requirement L x W x H 2200 x 1600 x 3250 mm Weight 8.3 tons Good condition

Condition: used, Year of construction: 1977, pressing force: 75 t, Eccentric press EBU SK75 U Year of manufacture: 1977 Njdpjzv Skdofx Aa Howk Location: Bad Tölz Inspection is welcome. We have other used machines available. Please feel free to contact us.

Condition: used, Single-column eccentric press HELMERDING Type EH 25 B Machine No. 5917 Year of manufacture: 1993 Pressing force: 25 tons Throat depth: 180 mm Table area: 560 x 360 mm Nsdpfxsyath To Aa Hswk Ram area: 315 x 150 mm Table through-hole: 150 x 100 mm Stroke adjustment: 8 - 82 mm Ram adjustment travel: 60 mm Installation height max.: 330 mm Clamping pin bore: Ø 40 mm Strokes per minute: 145 Table height adjustment: 150 mm Table height above floor: 630 - 780 mm Motor power: 1.5 kW Power supply: 400 Volt, 50 Hz - Hydraulic clutch-brake combination, manufacturer: ORTLINGHAUS - Electric foot switch and two-hand control - Automatic central lubrication by BEKA lubrication system - Electrical cabinet with 2-channel contactor control - Press table height-adjustable via 2 threaded spindles - UVV [accident prevention regulations] according to VBG 7n 5.1 for manual loading operations - Electrical diagram Space requirements (L x W x H): 1600 x 1100 x 1900 mm Weight: 2 tons Good condition

Condition: excellent (used), Eccentric press Inventory no. 3919 Manufacturer: Weingarten Nwsdpfxjzpbvij Aa Hok Type: XOR 2 Press force: 75 tons * Stroke adjustment: 10 to 100 mm * Adjustable ram: 60 mm * Installation height: 360 mm * Overhang: 270 mm * Table area: 630 x 600 mm * Foot-operated * Machine weight: approx. 4500 kg In very good condition.

Condition: like new (used), Year of construction: 1991, functionality: fully functional, power: 30 kW (40.79 HP), input voltage: 200 V, type of input current: three-phase, pressing force: 250 t, table width: 760 mm, table length: 2,700 mm, overall weight: 35,000 kg, punching force: 250 t, Equipment: documentation/manual, safety light barrier, AIDA NC2-250(1) 250t eccentric press in excellent condition /ctA2/ Njdpfx Aaeu Dxb Ts Hswk Manufacturer: AIDA Type: NC2-250(1) Push force: 160t Year of manufacture: approx. 1991 Stroke length: 170mm Distance above table: (adjustable) 280-400mm Table size: 2700x760mm Bear size: 2100x700mm Electrical power: 3x200V(!!), 30kW - Japanese standard Net weight: 35000kg Size: 2760x2800x3980mm Automatic greasing system. Automatic cutting oil dosing - RAZIOL EST-02 Optionally with disc winder and straightener.

Condition: good (used), Year of construction: 1985, power: 1.5 kW (2.04 HP), overall weight: 1,700 kg, Eccentric press EBU H25 Year of manufacture: 1985 Location: Bad Tölz Inspection is welcome. Nwedezv Sitepfx Aa Hsk We have other used machines available. Please feel free to contact us.