Used Tbt T20-1-1500 for sale (80,140)

Condition: reconditioned (used), -Drill diameter: 5~25 mm -Drilling depth: 1500 mm -Tailstock -Tank -Pump -Filter Fpjdpfehuil Rjx Akhjk

Condition: ready for operation (used), -Drill diameter: 5~25 mm -Drilling depth: 1000 mm -Tailstock -Tank -Pump -Filter Fedpfxsdgplto Akhepk

Condition: excellent (used), Approx. 1500 m² single-story steel platform Used, good condition, see pictures. Manufacturer: STOW Length approx. 58.5 m Width approx. 54.6 m Height (bottom edge) 3.4 m Height (top edge) 3.7 m Load capacity 500 kg/m² Fodpfx Aod S S N Rskhepk C-profile and Sigma-profile construction Fastened with screws and nuts Adjustable grid spacing in length Floor construction is 38 mm chipboard, highly compressed, tongue and groove Underside white, top side gray coated Negotiable price: Offer upon request! Partial sale possible! Dismantled and loaded. Goods are in stock. Transport costs available upon request. Inspection possible at any time by appointment. Further information available upon request. We constantly have over 5,000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, information and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT, ex warehouse) Lenox Trading – Top warehouse technology & used & new heavy-duty racking Description: Are you looking for high-quality warehouse racking to buy? With approximately 100 employees, Lenox Trading is one of the largest dealers of new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ PROMPTLY AVAILABLE: • Over 10,000 linear meters of racking promptly available • 20,000 m² of warehouse platforms & steel platforms immediately available • 30-50 semi-trailer loads of goods turnover weekly for maximum selection 📦 OUR ASSORTMENT (BUY CHEAPLY ONLINE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving, tire racking or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, disassembly and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / LIQUIDATION: • SSI Schäfer (Schäfer Lagertechnik, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, Heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi Cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND BUSINESS: ONLINE AUCTIONS & LIQUIDATION For disassembly and clearance orders, we offer a real all-round carefree package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete inventory including complete clearance. 2. Commission-based auction: Conducting auctions on behalf of others. Our full service is provided by our own employees: Cataloging, office preparation, inspection, goods dispatch, logistics, dismantling and complete handover. Whether you became aware of us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking system, we guarantee the best conditions. Contact us for a non-binding offer!

Condition: used, functionality: fully functional, machine/vehicle number: 106341-11, Year of construction: 2005, overall weight: 8,000 kg, total height: 2,700 mm, total length: 5,660 mm, total width: 3,956 mm, The drilling method of the deep hole drilling machine is single-lip drill deep hole drilling. Drilling Unit Information: - Number of spindles: 1 - Infinitely variable spindle speed: 300 – 8000 rpm - Spindle drive power: 7.5 kW - Max. drilling depth: 800 mm - Drilling diameter min/max: 3 – 25 mm based on ST 60 - Max. twist drilling: 25 mm - Max. thread tapping: M24x3 - Milling material removal rate: 150 cm³/min Travel Paths: - X-axis travel: 800 mm - Y-axis travel: 400 mm - Z-axis travel: 630 mm - W-axis travel: 800 mm Travel Speed: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 800 liters - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic system/equipment - 1x submersible pump: Pumping capacity: 200 l/min - 1x low pressure pump: Pumping capacity: 100 l/min Pump drive: 1.7 kW - 1x compact belt filter: Filtration capacity: 120 l/min for processing steel/non-ferrous metals - 1x radial piston pump with remote adjustment: Pumping capacity: 2 – 94 l/min Pump drive: 7.5 kW Spindle Unit: - Cartridge spindle design with drive housing and spindle drive with gearbox. Spindle bearing with precision angular contact ball bearings and lifetime grease lubrication. Milling and Drilling Spindle Unit: - For conventional machining - Spindle head with HSK 50 tool holder Drill Bush Holder: - Design as 2-position turret with electric swivel mechanism - Locating position via Hirth coupling - Turret head with fixtures for: Guide bushes for deep hole drilling Milling and drilling spindle unit for conventional machining Pickup Tool Changer: - For conventional tools and drill bushings - Disc magazine design with 20 stations including feed stroke Automatic Tool Changer for Deep Hole Drilling Tools: - Fixed ELB column magazine for at least 5 tools including automatic tool clamping for HSK holders Clamping Table with W-Axis and NC Rotary Table: - Length/width: 800 x 600 mm - Positioning accuracy: B-axis +/- 30" - Centric payload: 1,500 daN Workpiece Clamping Device: - 1x tailstock with manual clamping movement Fpodpfx Ajw E H E Rjkhsk - 1x NC dividing unit (A-axis) with manually operated two-jaw chuck for workpiece clamping - 1x base plate for mounting and clamping drill bushings + supporting prisms Electrical Equipment Information: - 1x CNC control Sinumerik 840D (digital complete system), including PLC S7-300 Connection Data: - Operating voltage: 3AC 400V ±10% – Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 25 kW

Condition: excellent (used), Year of construction: 2015, ARBURG A 1500 T 2000-400 Drehtisch (29.844 h) (S&P 3792) Manufacture year: 2015 Operating hours: 29,844 Stunden Screw: 40 mm Injection pressure: 2000 bar Stroke volume: 201 cm³ Clamping Force: 200 t Fodezrwfropfx Akhepk Tie bar distance: 1500 mm Mould installation height min.: 400 mm Plate distance max.: 700 mm Dimensions: 4700 x 2100 x 2600 mm Eeight: 11500 kg Connected load: 22 kW 1500mm Table-diameter, 2-station (180°) turntable, 2 x Corepuller, Airvalve, Interface Colorizing, Hotrunner, price when new approx. 250.000,- € etc... Price: on request contact: Mr. Ralf Schulz

Condition: refurbished (used), Lathe for iron and metalworking Nosotti brand T200/1500 model Fsdpfxsy D Suns Akhspk accessories how to take photo Overall dimensions: cm. 270 x 80 h. 120

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 178759, clamping force: 2,000 kN, screw diameter: 35 mm, installation height: 350 mm, total length: 5,000 mm, total width: 2,200 mm, total height: 3,800 mm, overall weight: 13,000 kg, power: 53.5 kW (72.74 HP), input frequency: 50 Hz, input voltage: 400 V, controller manufacturer: ARBURG, table diameter: 1,500 mm, ARBURG ALLROUNDER 1500 T 2000-350 Injection Molding Machine - Clamping force: max. 85 kN - Opening force: max. 120 kN - Opening stroke: max. 300 mm - Distance between mold plates: max. 650 mm - Screw travel: max. 145 mm Note: The item must be picked up between September 8th and 10th, 2026, on a date to be confirmed. FCA D-63128 Dietzenbach – loaded onto a truck. Fpedpfx Aszlfmkjkhjk

Condition: not inspected (used), Year of construction: 1970, - Drilling diameter: 5-30 mm - Drilling depth: 750 mm - Filter - Pump Fsdpfx Aexzz Hjkhspk

Condition: like new (used), The machine is completely overhauled and therefore as good as new! Technical specifications Drilling method : single-lip drilling Number of spindles 1 Drilling range in steel D= 1-6 mm Drilling depth 420 mm Max. workpiece length 420 mm Manufacturer: TBT / SFT New electrics and new controls! Fpjdpofgwlbjfx Akhok

Condition: good (used), - Drilling diameter: 5-30 mm - Drilling depth: 750~900 mm Fpodps Dcz Dofx Akhek - Modifications according to customer requirements

Condition: used, Cast bed Length: 2410 mm Width: 1500 mm Thickness: 550 mm Fpodozmxriopfx Akhjk 8 T-slots 50 x 27 mm with 2 opening (possibility to close them) 1 opening L 560 x W 500 mm 1 opening L 480 x W 360 mm Weight: approx 5 T

Condition: good (used), Year of construction: 1990, Ref. -No.: 10301 Manufacturer: TITAN Type: RU 350 x 1-1500 Fpjdpfx Ajycpv Sekhok Year of construction: 1990 Type of control: Konventionell Storage location: Halberstadt Country of origin: USA Max. Grinding length: 1.500 mm Max. Workpiece Weight: 300 kg Grinding Diameter: 350 mm Max. Dia. Of Grinding Wheel: 280-500 mm Grinding Wheel Width: 80-100 mm

Condition: good (used), Year of construction: 2014, functionality: fully functional, overall weight: 2,200 kg, KUKA KRC4 linear axis 1500/3T Article number: 8143984 Serial number: 143984 The KUKA KRC4 linear axis is a high-quality axis that is ideal for industrial applications. It offers precise motion control and is particularly important for automation processes and robotic systems in manufacturing. With its robust design, it guarantees reliable performance in demanding applications. Fedpovzr Svjfx Akhepk

Condition: used, Technical details: floor-plate length: 2000 mm plate width: 1500 mm plate height: 820 mm Plate thickness: 185 mm weight of the machine ca.: ca. 2,1 / 2,2 pro Platte t transport dimensions LxWxH: ca. 2,0 x 1,5 / pro Platte m There are 6 of these clamping plates for sale. (price per piece) Material cast steel/profile casting T-slots according to DIN 650: a=43; h=105; b=76; c=50 mm; center distance 375 mm 4x passage holes Ø 90 mm 10x fixing holes Ø 25 mm with countersink Ø 85 x 135 mm with base frame for shelf no. 1+3+4+5+6: L: 1990 mm x W: 1490 mm x H: 185 mm Fsdpfju N D Rdex Akhopk with base frame for panel no. 2: L: 2020 mm x W: 1515 mm x H: 520 mm *

Condition: used, Technical details: Fpsdpfx Akey Rru Iohek floor-plate length: 4000 mm plate width: 1500 mm plate height: 450 mm Plate thickness: - mm weight of the machine ca.: 5,9 t transport dimensions LxWxH: 4,0 x 1,5 x 0,45 m There are 6 of these clamping plates for sale. (price per piece) Material cast steel/profile casting T-slots according to DIN 650: a=43; h=105; b=76; c=50 mm; center distance 375 mm 4x passage holes Ø 90 mm 10x fixing holes Ø 25 mm with countersink Ø 85 x 135 mm with base frame for shelf no. 1+3+4+5+6: L: 1990 mm x W: 1490 mm x H: 185 mm with base frame for panel no. 2: L: 2020 mm x W: 1515 mm x H: 520 mm *

Condition: new, functionality: fully functional, machine/vehicle number: NEW-21, maximum load weight: 1,062 kg, overall weight: 1,500 kg, axle configuration: 1 axle, loading space length: 2,560 mm, loading space width: 150 mm, loading space height: 300 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, SARIS K1 256 150 1500 1, Single-axle tipper trailer NEW VEHICLE Internal dimensions: 256cm x 150cm Sideboard height: 30cm Bed height: 67cm Total weight: 1500kg Payload: 1059kg Braked single-axle trailer Overrun brake and parking brake by AL-KO 1500kg axle with brake and cooling fins Low chassis Fully welded, hot-dip galvanized steel frame Aluminum profile sideboards with tension lock Can be folded down and removed on all sides 15mm thick, non-slip and robust screen-printed plywood floor Additional steel plate on plywood floor Automatic jockey wheel with 400kg support load 6 noise-reducing tie-down points with 800kg tensile force Reinforced 13" C-rated tires with steel valve M+S tires Net/rope hooks on the frame 13-pin connector LED marker lights at the front Rear lights with reversing light and triangular reflectors Upper frame mounted on rubber supports Large tipping angle of 41 degrees backwards Hand pump with adjustable handle OPTIONAL ACCESSORIES, PERMANENTLY REDUCED PRICE FROM FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -Without sideboards (price reduction) -Sideboard height increased to 35cm -Black Edition (Powder-coated sideboards and rims in black) -Ramps -Electric tipping operation -Charger -Remote control -Bluetooth remote control -Emergency hand pump in combination with electric operation -Safety support for maintenance work on a tilted vehicle -Folding crank for rear supports -Complete LED lighting -Theft protection -Net, fine or coarse mesh -H-frame Fodpfx Aoghpbnskhopk -Leaf guard in various heights, also closed -Extension sideboards 30cm with tension lock -Flat cover with or without bows -High cover 160cm or 180cm Further accessories available on request! Plus shipping to Gera and vehicle registration document 200 € net Pictures are for illustrative purposes and may show optional accessories at an extra cost. Have you not yet found the right trailer? We have 50-100 vehicles permanently and immediately available in stock. The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all kinds of repairs. Specialist in axle repair, also for caravans. In addition, we have a large range of spare parts and accessories, also for trailers from various manufacturers. Visit us online or come by directly!

Condition: used, Year of construction: 2002, grinding diameter 450 mm grinding length 1500 mm centre height 225 mm Control FAGOR EQUIPEMENT - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - T6: HF Fischer spindle MFV or MFZ 1224/1242/1260 - T7: HF Fischer spindle MFV or MFZ 1224/1242/1260 - Marposs tool measurement - active longitudinal positioning - Elaso GAP-control on T1 and T2 contactless integrated in the control surface - Elaso GAP internal grinding with fluid sensor for T6 and T7 - semi-automatic balancing by Elaso integrated in the control surface for T1/T2 - tailstock hydraulic with fine adjustment +/- 150 microns - dresser on workpiece spindle side table mounted - dresser on tailstock side table mounted - dresser on upper table - new service- and userfriendly housing SPECIAL EQUPEMENT: Workhead with direct drive Fjdeuxfu Nopfx Akhspk - strongly recommended for non-circular grinding - workpiece weight flying max. 75kg - workpiece weight between centres 150kg - water-cooled B-axis with direct drive - center height 225 mm - extremely torsionally stiff - highly accurate positioning - resolution ° - water-cooled Hydrostatic ball screw - x-axis - wear-free, as there is no contact during operation - no loss of precision, even during long-term use at full load and maximum speed - no friction at low speeds - no friction force backlash when the direction of rotation changes - translates even the smallest rotational movements - no stick-slip effect even at low speeds - no fluctuations in frictional torque due to ball circulation - higher axial stiffness compared to ball screws - significant improvement in damping, resulting in better workpiece surface finish and tool life - no oscillations due to ball circulation - also suitable for high speeds and accelerations - cost-effective alternative to the linear motor with greater precision and significantly lower heat generation - significantly less power dissipation and, as a result, no problems with swarf on permanent magnets New hydraulic unit - optimized temperature control (chiller) - Energy-saving Only one pump controlled by VFD - Pressure monitoring - monitoring of the hydrostatic oil for water content. (Damage to the bellows is recognised and detected prematurely) -fine adjustment +/- 150 microns Paper belt filter 375l – alternative 480l Grinding mist extraction system – emulsion MECHANICAL OVERHAUL -complete machine according to Kellenberger protocoll -new painting ELECTRICAL OVERHAUL - new modern Fagor CNC with BEMA HMI - new electric cabinet - new digital drive technology - replacement of all electrical cables, switches etc. - new absolute external scales in x- and z-axis - new absolute encoder (B-axis) Grinding software BEMA-Standard: - workpiece zeroing - grinding wheel zeroing - dressing diamond measuring - corrections - external and internal surface grinding - external and internal angle grinding (turning of the b-axis, dressing with straight wheel) - external and internal radius grinding (radius dressed on wheel) - semi-automatic traverse grinding - workpiece zeroing - 2 dressing diamonds - 1 dressing blade - dressing roll - 3 flat dresser - corrections - Z-position measurement - GAP control Optional grinding cycles at no extra charge: Profile plunge grinding: - external and internal profile plunge grinding with profile wheel Pr...

Condition: used, functionality: fully functional, Year of construction: 2021, load capacity: 1,500 kg, 3 electric pallet trucks SolidHub HWE1500-1, lithium-ion 24 V 60 Ah, year of manufacture 2021, load capacity 1500 kg, serial numbers 08015JH3594, 08015JH3614, 08015JH3554, 2 chargers included Fodpfx Aeybi Npjkhjpk

Condition: new, functionality: fully functional, machine/vehicle number: NEW-21, empty load weight: 462 kg, maximum load weight: 1,038 kg, overall weight: 1,500 kg, axle configuration: 1 axle, loading space length: 2,760 mm, loading space width: 150 mm, loading space height: 300 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, SARIS K1 276 150 1500 1 Internal dimensions: 276cm x 150cm Side wall height: 30cm Loading height: 67cm Gross weight: 1500kg Payload: 1059kg Braked single-axle trailer Overrun brake and handbrake by AL-KO 1500kg axle with brake and cooling fins Low chassis Fully welded, hot-dip galvanized steel frame Aluminium profile side walls with tension locks Sides folding and removable on all sides 15mm thick, anti-slip and robust phenolic plywood flooring Additional steel plate on wooden floor Automatic jockey wheel with 400kg support load 6 noise-reducing lashing eyes with 800kg tensile strength Reinforced 13" C-grade tyres with steel valve M+S tires Net/rope hooks on frame 13-pin plug LED marker lights at the front Rear lights with reversing light, rear fog and triangular reflectors Upper frame mounted on rubber bushings Large tipping angle of 41 degrees to the rear Hand pump with adjustable handle OPTIONAL ACCESSORIES PERMANENTLY REDUCED IN PRICE FROM FEBRUARY 2026 -100km/h equipment (shock absorbers) -Spare wheel with holder -Without side walls (discounted price) -Increased side wall height to 35cm -Black Edition (black powder-coated side walls and rims) -Ramp rails -U-profile for attaching the original SARIS ramp rail -Electric tipping control -Remote control -Bluetooth remote control -Emergency hand pump in combination with electric control -Safety prop for maintenance work on tilted vehicle -Complete LED lighting -Anti-theft device -Fine or coarse mesh net -H-frame -Mesh side extensions in various heights, also closed -Additional 30cm side walls with tension lock -Flat cover with or without bars -High cover 160cm or 180cm Further accessories available on request! Plus freight to Gera and vehicle registration documents: €200 net Images are for illustrative purposes only and may show accessories at extra cost. Have you not yet found the right trailer? We permanently have 50–100 units in stock, ready for immediate collection. Workshop open weekdays from 8:00 a.m. to 5:00 p.m. for all types of repairs. Specialist in axle repairs, including for caravans. Large selection of rental trailers. Additionally, we have a wide range of spare parts and accessories for trailers from all manufacturers. Fodpsrk Iybefx Akhepk Get expert advice by phone, visit our website or drop by in person.

Condition: new, machine/vehicle number: NEW-7, empty load weight: 326 kg, maximum load weight: 1,174 kg, overall weight: 1,500 kg, axle configuration: 1 axle, loading space length: 2,760 mm, loading space width: 1,500 mm, loading space height: 300 mm, suspension: other, tire size: 195 / 50 R 13, maximum speed: 100 km/h, color: silver, trailer brake: trailer braked, Year of construction: 2026, brakes: other, SARIS PL 276 150 1500 1 Internal dimensions: 276cm x 150cm Side board height: 30cm Loading platform height: 66cm Total weight: 1500Kg Payload: 1174Kg Braked single-axle trailer Overrun brake and handbrake by AL-KO Large 1500Kg brake with cooling fins Low chassis Fully welded, hot-dip galvanized steel frame Aluminum profile sideboards with tensioning latch Can be folded down and removed on all sides 15mm thick, non-slip, and robust screen-printed plywood floor Automatic support wheel with 400Kg support load 8 noise-reducing tie-down points with 800Kg tensile force Reinforced 13" C tire with steel valve M+S tires Net/rope hook on the frame 13-pin connector LED side marker lights at the front Rear lights with reversing light and triangular reflector Optional accessories: -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -Without sideboards (price reduction) -Sideboard height increased to 35cm -Black Edition (Powder-coated sideboards and rims in black) -Ramps -Steel plate on the floor -Complete LED lighting -Theft protection Fpedpfx Asghpczokhsk -Net with fine or coarse mesh -H-frame -Leaf grid in various heights, also closed -Extension sideboards 30cm with tensioning latch -Flat cover with or without rails -High cover 160cm or 180cm More accessories available on request! Plus freight to Gera and vehicle registration document 200 € net Images are for illustration purposes only and may show optional accessories at an extra cost. Haven't found the right trailer yet? We have 50-100 vehicles in stock and available for immediate pickup. The workshop is open on weekdays from 8:00 AM to 5:00 PM for all types of repairs. Specialist in axle repair, including for caravans. Wide range of trailer rentals. Hnobqeghpbyeupd Nfoh We also have a large selection of spare parts and accessories for trailers of all manufacturers. Get advice by phone, visit our website, or come by directly.

Condition: new, functionality: fully functional, empty load weight: 285 kg, maximum load weight: 1,215 kg, overall weight: 1,350 kg, axle configuration: 1 axle, loading space length: 2,550 mm, loading space width: 1,330 mm, loading space height: 430 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, SARIS MP 255 153 1500 2 NEW VEHICLE Internal dimensions: 255 cm x 153 cm Side wall height incl. railing: 43 cm Loading platform height: 52 cm Gross vehicle weight: 1,500 kg Payload: 1,215 kg Braked single-axle low-loader Overrun brake and handbrake by KNOTT 1,500 kg braked axle Low chassis Fully welded hot-dip galvanized steel frame Aluminum profile side walls Steel railing Rear tailgate foldable and removable 15 mm thick, non-slip and robust phenolic plywood floor Jockey wheel 6 lashing eyes with 400 kg tensile strength each 14" reinforced C-rated tires M+S tires Net/rope hooks on frame 13-pin connector Front marker lights Rear lights with reversing light, fog lamp (NSL), and triangular reflectors OPTIONAL ACCESSORIES PERMANENTLY REDUCED IN PRICE FROM FEBRUARY 2026 -100 km/h approval kit (shock absorbers) -Spare wheel with holder -Foldable and removable front wall -Integrated loading ramps, 2,000 kg capacity -SARIS alloy wheels -Full LED lighting -Anti-theft device -Net, fine or coarse mesh -H-frame -Mesh side panels in various heights, also closed -Flat cover with or without bows -High tarpaulin (150 cm or 180 cm) -Rear support legs Further accessories available on request! Plus shipping to Gera and vehicle registration documents: €150 net Pictures are for illustrative purposes only and may show optional, extra-cost accessories. Fjdpfx Aork Imlekhspk Have you not found the right trailer yet? We have 50–100 vehicles in stock at all times for immediate pickup. Our workshop is open for all types of repairs from 8:00 AM to 5:00 PM on weekdays. Specialist in axle repairs, including for caravans. Large selection of rental trailers. Furthermore, we offer a wide range of spare parts and accessories for trailers from all manufacturers. Get advice over the phone, visit our website, or stop by directly.

Condition: used, Year of construction: 2004, functionality: limited functionality, machine/vehicle number: N07/09, !!! SALE TO THE HIGHEST BIDDER !!! MBO Folding Machine T500-1-500/4F – 4 Buckle Plates – Industrial Folding Machine For sale is a folding machine manufactured by MBO Group, model T500-1-500/4F. This machine is ideally suited for print shops, lettershops, and finishing operations for the folding of brochures, leaflets, inserts, and other printed products. The robust construction of MBO folding machines ensures precise folding results, high reliability, and durable industrial quality. The buckle plate system enables a wide range of fold types to be carried out quickly and efficiently. Technical Data Manufacturer: MBO Group Model: T500-1-500/4F Machine Number: N07/09 Wiring Diagram: 35.1901.14 Folding System: Buckle Plate Folding Machine Number of Buckle Plates: 4 Max. Working Width: approx. 500 mm Application Area: Folding of printed products Possible Applications Brochures Flyers Inserts Folders Multi-page printed materials Condition Used, condition appropriate to age. Inspection Fpsdpfoyuc Ryex Akhsk Inspection of the machine possible by appointment. Further information available upon request.

Year of construction: 2026, condition: new, Our KVK 1S - Economic is our most economical way to purchase a semi-automatic stretch wrapper. The only thing that still has to be done manually with this wrapper is applying and cutting the film. With a weight of 600 kg, the model is sturdily built and designed for loads of up to 1500 kg. The KVK 1S Economic has a 1500 mm turntable and can wrap pallets up to 2250 mm high. With adjustable speeds of the turntable and film carriage, as well as the mechanical mechanical brake, you can easily adapt the automated wrapping to your product. Automatic recognition of your pallets is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rain-tight" wrapping. If required, the winder can also be controlled manually. If the winder needs to be moved to a different location, it can be easily lifted and moved with a forklift using the integrated cut-outs. Fpodszr H Dwopfx Akhsk A drive-on ramp and a photocell for detecting dark packaging materials or black film are optionally available. The KVK 1S Economic is our recommendation if you want to switch from manual to automatic wrapping of your pallets with as little investment as possible. This machine is ideal for shippers with pallet volumes of up to approx. 10 pallets per working day For further information we have attached the technical data sheet as PDF to this advertisement !

Condition: used, Used chamber filter press Andritz/Netzsch 1500x2000 with 125 plates Quantity: 2 available Press dimensions: Length: 13455 mm x Width: 3125 mm x Height: 4635 mm Empty weight: 51600 kg Filter area: 459 m2 Filter area after expansion: 559 m2 Press volume: 4989 l Press volume after expansion: 6080 l Cake thickness: 25 mm Fjdszlb D Sspfx Akhepk

Year of construction: 2003, condition: excellent (used), machine/vehicle number: MBUT133-544, DEMAG KBK crane canopy crane runway with dimensions approx. 10.5 x 6m Payload / lifting capacity 500 KG - 0.5to Technical data of the system: Crane runway made of Demag KBK1/2 rails System is supplied complete: KBK rails, rail joiners, trolleys, end plates, cable trailing, brackets incl. steel 500KG chain hoist - lifting height approx. 3m Crane is dismantled and immediately available Used condition, see pictures Item location is 75053 Gondelsheim Shipping by forwarding agent or collection by appointment only Fodpsty Sxwjfx Akhjpk Demag KBK1 KBK2 and KBK3 tracks are stock items ! Other KBK installations are also in stock. Payload 125KG - 1600KG Please ask for your crane runway with load capacity and dimensions without obligation.