Used Tecni-Armentia Tecni-Armentia Ch-70 Edger for sale (24,431)

Condition: excellent (used), TECNI-ARMENTIA CH-70 edger - hydraulic control - the possibility of programming the width - saving up to 12 programs - centering table TECHNICAL PARAMETERS: cutting width max. 700 mm cutting height max. 130 mm main engine power 55 kW material width max. 830 mm length of the fixed sleeve 300 mm length of the movable sleeve 100 mm min. material length 700 mm spindle diameter 65 mm sleeve diameter 85 mm disc diameter 350 - 400 mm hydraulically smoothly adjustable feed feed speed up to 38 m / min feeding table 2700 mm roll width 700 mm roll diameter 140 mm centering feeding table two lasers pump motor power 4 kW row of anti-recoil pawls three upper pulling rollers three lower pull rollers hydraulic pressure hydraulic height adjustment Fpedpfjidmptox Afujn dimensions (length / width / height) 480/200/230 cm weight 4000 kg

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, total length: 69,000 mm, total width: 16,000 mm, total height: 16,000 mm, The system was designed according to Eurocode EN 1993 for the industrial drying of wood chips, sawdust, or similar biomass products and is suitable for use in biomass, wood, or pellet production. Process components: Air heater, deflection rollers, feed modules, discharge modules, trough chain conveyor, belt tensioning and adjustment device, 7 exhaust stacks (height up to approx. 17.6 m) Designed for hot air or waste heat utilization (e.g., biomass boiler or CHP plant), heat requirement 10,270 kW th, installed electrical power 690 kW el. The inlet temperature in the dryer is 68°C, the outlet temperature is 42°C, and the heat transfer medium is a water/glycol mixture. The volume flow at the dryer outlet is 1,081,000 m³/h. Dust emission value 5 mg/Nm³ (moist), sound pressure at a distance of 1 m 85 dB(A) from the opening of the exhaust duct and the dryer. The dryer is designed for an outside temperature down to -40°C, the conveying capacity is at least 70 m³/h and a maximum of 250 m³/h with a bulk density of 260 kg/m³. The working platform of the dryer is located on approximately 8.00 m high steel supports and is enclosed with thermally insulating sandwich panels. A hall or other production components can be inserted under and between the supports (see under Documents, Steel Structure). The system has been disassembled and stored by an experienced assembly team, and this team can be arranged for transport and reassembly. Fjdpfx Aszw Apgofuepn Please note: We are selling exclusively this belt dryer and no other parts! Please direct your inquiries via WhatsApp to Mr. Sörgel; he is on-site at the factory and may not always be available by phone. Thank you very much!

Condition: used, functionality: fully functional, Year of construction: 2003, operating hours: 4,418 h, load capacity: 7,000 kg, lifting height: 3,000 mm, fuel type: gas, mast type: duplex, construction height: 2,950 mm, drive type: Treibgas, LPG forklift Load center: 600 Mast type: Duplex Fpodpfx Aowzdv Sefuon Condition: Ready for operation and fully functional Technical condition: good 3rd valve, 4th valve,

Year of construction: 2010, condition: excellent (used), functionality: fully functional, 1 x Giemme Thermo Packaging Machinery S.r.l. semi-automatic shrink bundling machine. Manufacturer – Giemme Thermo Packaging Machinery S.r.l. Fjdpfjyzxgfjx Afuopn Model – ALTAIR 70 P. Serial number – 001.041.10. Date of manufacture - 2010. Speed – up to 12 packs/minute. Electrical supply – 400 V / 50 hz / 3 phase. Power – 20 kW. Overall dimensions – 3000mm long x 1200mm wide x 2000mm high.

Condition: ready for operation (used), Year of construction: 1972, functionality: fully functional, Braun resaw Type CH6B-70, year 1972 Swing frame without width adjustment with splitting wedge Saw tensioner - hydraulic side pressure, year 1989 Round timber transverse conveyor with 4 strands, approx. 7 m long, year 1980 Round timber singulator with 5 strands, approx. 1.40 m long, year 1980 Mayerhofer carriage Type VH with auxiliary carriage, year 2002 Powered resaw roller conveyor, 4 m long, 1.60 m wide, year 1980 Powered resaw roller conveyor, 1.60 m wide, approx. 15 m long with integrated ejector with 5 strands Transverse conveyor with 5 strands, approx. 6 m long, for side timber, year 1980 Fjdpfxsv I D Ezj Afuspn Sharpening equipment consisting of: Meinert resaw saw set machine PH4D, year 1967 Vollmer automatic resaw saw set machine AT

Condition: excellent (used), Year of construction: 2024, ENGEL DUO 36060/2700 TECH INJECTION MOLDING MACHINE Year of manufacture: 2024 Clamping force: 27,000 kN (2700 tons) Robot: ENGEL VIPER 90 CLAMPING UNIT Clamping force: 27,000 kN Mold opening stroke: 3300 mm Maximum mold opening distance: 4100 mm Minimum mold height: 800 mm Maximum mold height: 2200 mm Column spacing (H × V): 2180 × 1750 mm Platen dimensions (H × V): 2970 × 2640 mm Opening force: 770 kN Opening force with hydraulic cushion: 1600 kN Dry cycle time (EUROMAP 6): 5.6 s INJECTION UNIT Screw diameter: 190 mm L/D ratio: 25:1 Screw stroke: 850 mm Injection volume: 24,100 cm³ Fpjdez N Et Dopfx Afuon Theoretical injection weight (PS): approx. 21.9 kg Injection rate: 2620 cm³/s Injection pressure (regenerative mode): 1300 bar Maximum injection pressure: 1600 bar Screw speed: 85 rpm Maximum screw speed: 100 rpm Screw torque: 24,000 Nm Torque at maximum speed: 20,400 Nm Plasticizing rate (3-zone screw): 238 g/s Plasticizing rate (barrier screw): 296 g/s INJECTION NOZZLE Nozzle stroke: 1300 mm Nozzle closing force: 210 kN EJECTION SYSTEM Ejector stroke: 400 mm Ejector forward force: 420 kN Ejector return force: 420 kN HEATING SYSTEM Number of heating zones (including nozzle): 12 Installed heating power: 160.9 kW DRIVE AND HYDRAULIC SYSTEM Installed motor power: 355 kW Motor power for charging pump: 3 kW Hydraulic oil tank capacity: 3500 l COOLING SYSTEM Required cooling capacity: 66.9 kW Water consumption (supply temperature 32°C): 5.88 m³/h ADDITIONAL EQUIPMENT Linear robot: ENGEL VIPER 90 Movable / pull-out guide column Hot runner control: 160 zones Hydraulic core control: 3 + 3 Cascade control: 72 channels

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, type of input current: three-phase, Salvamac Leader 70 Heavy Duty Hydraulic Briquetting Press Fsdpfxozc Ihmo Afuopn

Condition: excellent (used), functionality: fully functional, Feller hot runner controller, 70-channel. Prepared for expansion to 80 channels! In excellent condition, sourced from a cleanroom injection molding facility in the medical technology sector. The original new price was over €20,000. Fpjdpfozdu Hqjx Afuen

Condition: like new (used), Year of construction: 2020, Clamping force: 25 ton Version: Shuttle table Opening force/stroke min.- max. : 100/225 mm Mould height variable min.- max. : 122-222 mm Shuttle table stroke: 500 mm Wight on shuttle table. max. :120 kg Ejector force/stroke max. : 16/40 kN/mm Screw: 22 mm Fpjdpfxsvl Skaj Afuon Effective screw length L/D : 20 Screw stroke max. : 90 mm Stroke volume: 34 cm3 Shot weight: 31 g Injection pressure: 2000 bar Working hours: 7397 h

Condition: like new (used), Year of construction: 2018, Clamping force: 25 ton Version: Shuttle table Opening force/stroke min.- max. : 100/225 mm Mould height variable min.- max. : 122-222 mm Shuttle table stroke: 500 mm Wight on shuttle table. max. :120 kg Ejector force/stroke max. : 16/40 kN/mm Screw: 22 mm Effective screw length L/D : 20 Screw stroke max. : 90 mm Stroke volume: 34 cm3 Shot weight: 31 g Injection pressure: 2.000 bar Working hours: 15.571 h Fpjdpfoyfg D Sjx Afuon

Year of construction: 1998, condition: used, functionality: fully functional, Description: For sale is a large-scale, professional BERKMANN surface spraying and painting system. The system was in productive use until recently and was used for high-quality painting work, including demanding high-gloss finishes. It is currently still fully assembled and installed. This allows interested parties to inspect the existing scope of the system and the installation situation before dismantling and to document it for a later reconstruction. Technical Data and Equipment • Large-area filtered supply air ceiling panel approximately 8,100 × 4,500 mm • Filter ceiling divided into two areas across its width • Large-area floor extraction approximately 8,100 × 3,650 mm with grating • Supply air treatment approximately 24,500 m³/h • Exhaust air treatment approximately 24,000 m³/h Fpjdsz Ikyrjpfx Afujn • Supply and exhaust air fans / air treatment • Existing heating/hot water technology with pumps and fittings • Air ducts and existing piping • Electrical system control / control panel • Cabin lighting • Sale includes the system as it currently exists on site Condition and Use Used, condition appropriate for its age. The system was in regular production use until recently. Previous use included high-quality surface finishing, including high-gloss coatings. An inspection of the still-assembled system is highly recommended. Sales and Dismantling Conditions Sale is effective immediately. The system is permanently installed. Dismantling, removal, loading and transport are the complete responsibility of the buyer and will be carried out at the buyer's expense. The buyer is responsible for organizing the necessary skilled personnel as well as lifting, dismantling and transport equipment. The complete dismantling and removal must be completed by July 31, 2027, at the latest. Note: Technical data has been compiled based on available documents, nameplates and the current condition of the system. Information is provided without guarantee. The condition and scope determined during inspection shall prevail. Selling price: 31,500.00 EUR Price is net, any applicable statutory taxes and duties are excluded. Export, customs clearance and import duties are the responsibility of the buyer.

Condition: used, Year of construction: 2019, functionality: unexamined, Laser engraving machine, Trotec Speedmarker 700 Year of manufacture: 2019 Location: Bad Tölz Inspection is welcome. We have other used machines available. Please contact us. Fpsdpfjzudyujx Afusn

Condition: used, Year of construction: 2003, CLAMPING UNIT Clamping force: 500 kN Locking force: 500 kN Distance between tie bars: 370 x 370 mm Max. opening stroke: 400 mm Min. mould height: 210 mm (160 / 135 mm with ZE 214) Max. distance between platens: 610 mm (660 / 710 mm with WA 211) Platen size (H x V): 540 x 530 mm Max. mould weight: 580 kg Max. mould weight on moving platen: 380 kg HYDRAULIC EJECTOR Ejector stroke: 125 mm Ejector force: 41.2 kN Ejector retraction force: 14.8 kN INJECTION UNIT (200) Screw diameter: 30 mm L/D ratio: 20 Injection pressure: 1900 bar Stroke volume: 106.0 cm³ Shot weight (PS): 94 g Max. dosing stroke: 150 mm Barrel heating power: 8.3 kW Hopper capacity: 20 l INJECTION UNIT – HORIZONTAL Max. nozzle stroke: 361 mm Nozzle penetration depth: 40 mm Nozzle contact force: 60 kN INJECTION UNIT – VERTICAL (parting line injection) A min / A max: 100 / 300 mm B min / B max: 100 / 468.5 mm Max. nozzle stroke: 368.5 mm Fpsdpfx Aez D U Ixefuon Nozzle contact force: 15 kN GENERAL Oil tank capacity: 180 l Pump motor: 18.5 kW Total installed power: 26.8 kW Dry cycle time (EUROMAP 6a): 1.80 s – 224 mm / 1.80 s – 259 mm Net weight (without oil): 3400 kg Dimensions horizontal (L x W x H): 3.9 x 1.2 x 2.0 m Dimensions vertical (L x W x H): 3.9 x 1.2 x 3.4 m Noise level (idle / full load): 56 / 71 dB(A)

Condition: used, functionality: fully functional, Year of construction: 2001, operating hours: 6,170 h, load capacity: 3,000 kg, lifting height: 7,000 mm, fuel type: diesel, mast type: telescopic, construction height: 2,440 mm, power: 70 kW (95.17 HP), empty load weight: 6,900 kg, total length: 5,000 mm, drive type: Diesel, construction width: 2,200 mm, Telescopic handler, rigid frame Mast type: Telescopic Condition: Ready for use and fully functional Technical condition: good Front tire type: Pneumatic Front tire condition: 0 - 20% Rear tire type: Pneumatic Rear tire condition: 0 - 20% Description: JCB 530-70 telescopic loader - - - Year of manufacture 2001 - - 7m reach - - 3 tons lifting capacity - - - 4-wheel steering - - 4-wheel drive - - 3 steering modes - - mechanical quick coupler - - - 4-cylinder Perkins diesel engine (95 hp) - - Tires are not in good condition - - Windshield has a crack - - - but otherwise in good condition - - including used pallet fork + used bucket (2.2 m wide) Fpsdpfx Afjz N N D Tsujn Bulk material bucket, double pallet fork, 3rd valve, heater, full cab.

Condition: used, mileage: 104,041 km, power: 375 kW (509.86 HP), first registration: 03/2023, fuel type: diesel, gearing type: automatic, emission class: euro6, Equipment: air conditioning, navigation system, Engine D2676LF78 - 510 hp / 375 kW EURO6 SCR - 2600 Nm C-R OBD-D, transmission ZF 12 TX 2826 OD MAN TipMatic, transmission software for off-road use (TipMatic OFFROAD), multifunction steering wheel adjustable in height and tilt, ESS, EBA2, ASR, mirrors heated and electrically adjustable, driver comfort seat with air suspension, MAN radio with 12V and 7" color display + navigation + NaviSD, trailer coupling RINGFEDER 4040 G 150B, driver comfort seat with air suspension, lumbar support, shoulder adjustment, and heating, auxiliary drive on the flywheel side with pump connection, wedge tenon profile DIN ISO 14 - 8x32x36 f=1.233, I.S.A.R., tank dimensions 7000 mm - 5000 mm, MAN BrakeMatic (EBS), emergency brake assist (ESS), cruise control, anti-lock braking system ABS, anti-slip control ASR, electronic stability program, tire pressure monitoring system. Fpsdpfx Afszhqp Ajusn

Condition: ready for operation (used), Year of construction: 2010, pressure 40.0 t chamfer lenght 1270 mm distance between columns 1000 mm column arm 200 mm stroke 100 mm dayligth 308 mm ajustment speed 150 mm/sec working feed 1-10 mm/sec return speed 100 mm/sec table width 100 mm table height 900 mm control DNC 60 PS oil volume 100 l voltage 400 V total power requirement 5.5 kW weight of the machine ca. 2750 kg - in checked conditions - machinevideo - ?v=WRzqKruFUvY Equipment: - CNC electro-hydraulic press brake - CYBELEC "DNC 60 PS" CNC control * Swiveling control panel, front left * Tool & program library - CNC electro-motorized backgauge (X-axis) * X-axis travel = 800 mm * 2x manually adjustable backgauge fingers (R+Z axes) * Backgauge on ball screws - CNC controlled axes Y1 - Y2 - X - Rehfuß upper tool system "A" with quick-change clamping * Additional crowning device in the tool holder - 4V universal die block with 60 mm die shoe - 2x sliding material/support arms ("Sliding System") - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - Light barrier behind the machine - FIESSLER AKAS laser safety device in front of the machine - 1x freely movable Double Foot Switch Fedpsx Emqtofx Afuspn - Operating Instructions (PDF)

Year of construction: 2018, condition: excellent (used), Vötschtechnik ClimeEvent C/480/70/15 Climate Testing Chamber Manufacturer: Vötsch Industrietechnik GmbH Type: ClimeEvent C/480/70/15 Machine Type: Climate Testing Chamber / Temperature Testing Chamber Test Chamber Volume: approx. 480 liters Temperature Range: -72 °C to +180 °C For sale is a used Vötschtechnik ClimeEvent C/480/70/15 climate testing chamber in a water-cooled version. Suitable for temperature and climate testing, environmental simulation, material testing, quality assurance, as well as development, aging, and stress tests. Temperature and humidity profiles, as well as automatic test programs, can be executed via the touchscreen control. Technical Data: Test Chamber Volume: approx. 480 liters Temperature Range: -72 °C to +180 °C Heating Rate: approx. 17 K/min Cooling Rate: approx. 15 K/min Max. Heat Compensation at +20 °C: approx. 8,000 W Climate Range: +10 °C to +95 °C Humidity Range: 10 to 98 % RH Dew Point Range: +4 °C to +94 °C Refrigerant: R449A / R23 Refrigerant Quantity: 4.00 kg / 2.30 kg Mains Connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated Power: 24 kW Rated Current: 43 A Cooling: Water-cooled version Cooling water inlet and outlet Connection for demineralized water Overflow and condensate drain Dimensions: External dimensions according to the installation plan (W × D × H): approx. 2,807 × 1,000 × 2,020 mm Transport dimensions with overhangs (L × W): approx. 2,857 × 1,115 mm Fodpfoz Airfox Afuepn Equipment: Touchscreen control / WEBPanel Program and manual test operation Temperature and humidity control Stainless steel interior Viewing window Test chamber lighting Shelves / Insert levels Side test chamber openings RS232, RS485 / RS422 and USB Status, alarm and maintenance display Program management and report function Transport Data: Transport dimensions: approx. 2,857 × 1,115 × 2,020 mm Weight according to series documentation: approx. 1,350 kg Shipping by freight forwarder possible Condition: Used Workshop inspected Optical condition as shown in the pictures. Scope of Delivery: Vötschtechnik ClimeEvent C/480/70/15 Shelves as shown in the pictures Available documentation / Operating manual Accessories as shown in the pictures Availability: by arrangement. Scope of delivery as shown in the pictures. Subject to changes, errors and prior sale.

Condition: good (used), Drill bits, twist drills, drill bits -Manufacturer: Maysso / Unisto / Hartner / Stock, Spiral drill bits 6 pieces Ø 51 - 70 mm -Type: Two-flute end mill, MK5 chuck with flat drill tip -Size/Quantity: see photo parts list -Price/Fee: complete Fpsdpfx Aoy A Inuofujn -on request: various sizes/quantities available from further stock -Transport dimensions: 345/270/H100 mm -Weight: 23.7 kg

Condition: used, System: Membrane-mix filter press Type: Membran-Mix 1000/70 Design: Side beam guided Year of manufacture: 2012 Model No.: SE1000CRD Filter plate format: 1000x1000 mm Number of plates: 70 Filter plates: PP Cake thickness: 40 mm Filter cloths: optionally available, adaptable to the medium Pressing volume: approx. 1600 dm3 (unpressed) Fpodpfewy H I Ijx Afusn Filtration pressure: approx. 15 bar Closing pressure: approx. 380–410 bar Plate transport: automatic Pump technology: optional Hydraulic unit: yes Control cabinet: yes Purchase or rental: Inspection of the systems at our plant by prior arrangement.

Year of construction: 2026, condition: like new (used), Walking floor container, 70 m³ Hydraulic walking floor Fodoztziqjpfx Afuopn Hydraulic roof Optional: Discharge and metering screw Cell wheel lock Hydraulic unit with remote control for hydraulic roof Conveyor screws Scraper chain conveyor For inquiries, please provide detailed information: - What is required? - What is the desired conveying capacity?

Condition: new, Year of construction: 2023, Shrink tunnel 70 digit Technical features Power supply: 200/220/380V Pase: 3 ph MAX product dimensions: 650x350x lg.1200mm Fpedpfx Asuaki Ssfuon Machine dimensions: 2770x1160x h.1640mm Weight trolley (net/gross): 415/483kg Tunnel inlet dimensions: 680x390mm

Condition: defective spare-parts repository (used), Year of construction: 2014, Kornit Breeze - Suitable for spare parts. Print heads faulty. Questions and additional photos on request. Fjdpfx Aeiqn R Rsfuepn

Year of construction: 2018, condition: excellent (used), Vötschtechnik ClimeEvent C/340/70/5 Climatic Test Chamber -70 °C to +180 °C Description: For sale is a high-quality climatic test chamber from Vötschtechnik GmbH, type ClimeEvent C/340/70/5, manufactured in 2018. This unit is suitable for demanding temperature and climate tests in laboratories, research institutions, development departments, and industrial quality assurance. Thanks to its large test chamber, powerful refrigeration system, and precise temperature and humidity control, the system is ideal for material, electronics, and long-term tests. The water-cooled design ensures reliable operation even under high-performance requirements. Technical Data: Fpedpjzznx Isfx Afuon Manufacturer: Vötschtechnik GmbH Type: ClimeEvent C/340/70/5 Equipment Type: Climatic Test Chamber / Temperature Test Chamber Test Chamber Volume: approx. 340 liters Temperature Range: -70 °C to +180 °C Temperature Change Rate: Heating: approx. 7.0 K/min Cooling: approx. 9.0 K/min Maximum Heat Compensation: approx. 3,000 W Temperature Deviation over Time: ±0.1 to ±0.5 K Temperature Homogeneity: ±0.5 to ±1 K Temperature Gradient: ≤2 K Climate Range: Temperature: +10 °C to +95 °C Humidity: 10 to 98 % RH Dew Point: -3 °C to +94 °C Refrigerant: R449A – 2.50 kg R23 – 0.75 kg Power Connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated Power: 9 kW Rated Current: 20 A Sound Pressure Level: approx. 57 dB(A) Design: Water-Cooled Dimensions (approx.): External: 1,830 × 900 × 1,890 mm (H × W × D) Internal: 750 × 580 × 765 mm (H × W × D) Weight: approx. 650 kg Features: Color Touchscreen Control Stainless Steel Test Chamber Interior Lighting Large Viewing Window Water-Cooled Refrigeration System Side Cable Entry Multiple Shelf Levels Ethernet Interface USB Interface Extensive Accessories as Shown in Photos Application Areas Temperature Testing Climate Testing Environmental Simulation Material Testing Electronics Testing Automotive Aerospace Research & Development Quality Assurance Aging and Stress Tests Condition: Used The unit is in good condition with typical signs of wear consistent with its age. Scope of Supply: Vötschtechnik ClimeEvent C/340/70/5 Accessories as shown in the pictures Service Shipping: Inspection can be arranged at any time. Loading onto a truck can be organized. Europe-wide shipping by freight forwarder is possible for an additional charge. Subject to prior sale and errors.

Condition: used, Boring head, spindle head, drill head, grooving head, grooving head, spindle drilling head, boring head, spindle tool, peeling drill, cutting head -Slicing drill: drill head cutting head with coolant device -Drill diameter: 70mm -Intake: MK5 Fpjdpfjk Hdtmox Afuen -Dimensions: 825/65/70 mm -Weight: 18 kg

Condition: ready for operation (used), Year of construction: 2016, Brand: HAKO Fpodpfjz Ndvuox Afuon Model: Scrubmaster B650 Year of manufacture: 2016 Capacity: 3200 m2/hour Scrubbing width: 65 cm Drive: 24V Clean water tank: 72L Dirty water tank: 74L Internal charger, 220 volts. For more information, please contact us. Multiple machines in stock!