Used Teka Strongmaster Ifa for sale (141)

Condition: new, 1860 m³/h Pressung 2.900 Pa 1,1 kW filter surface area 10 m² 72 dB(A) 400/50 V/Hz 665 x 820 x 1365 mm 165 kg mobile extraction, welding fume extraction (manual cleaning by loss of pressure) - Hose arm 3 m, joints inside - Filter cartridge: dust class M - Particle pre-separator: baffle plate - Current type: 3Ph+N+PE The filter system ----- The mobile filter system of the type StrongMaster IFA is particularly suitable for Welding work with unalloyed and alloyed steels, galvanized material and Crodpfx Ajkm Rynsd Nsb Aluminum in case of heavy smoke development. She corresponds to the Safety requirements for devices in the welding fume class "W3" (high-alloy steels with alloy components > 30% nickel-based alloy). When used as intended, the system can be used for be used in the recirculation mode, since the requirements for the Exceptions according to TRGS 560 are fulfilled. The filter will via a maintenance door using a compressed air gun from the clean air side cleaned. The cleaned particles fall into a dust collection drawer from the they can then be disposed of. The powerful scroll fan ensures a high volume flow even with saturated filter cartridges. The filter media ----- A baffle serves as a pre-separator for coarse particles. The filter cartridge installed below (dust class M, degree of separation > 99%) filters the finest smoke and dust particles. The cartridge is factory coated which increases the service life. The extraction arm ----- The extraction arm can be moved with the 3 internal joints Position spring support slightly and is in the set position cantilevered. A throttle flap integrated in the extraction hood enables the Flow rate setting.

Condition: excellent (used), For sale: Professional industrial extraction unit by TEKA, model STRONGMASTER BIA, designed for welding fume extraction and air pollution control. ‼️ VERY LOW HOURS – ONLY 1,550 OPERATING HOURS (this is rare for this type of equipment) ⚙️ Technical specifications: Manufacturer: TEKA (Germany) Model: STRONGMASTER BIA Capacity: 3,000 m³/h Max. negative pressure: 2,500 Pa Motor power: 1.1 kW Power supply: 400V (3PH + N + PE) Frequency: 50 Hz Rated current: 2.5 A Protection class: IP54 Control voltage: 24V Weight: approx. 130 kg 🔧 Equipment: Flexible extraction arm Industrial filter Control panel Operating hours counter Mobile chassis with wheels 🔍 Condition: Codpfx Adsyz Dilj Nsrb Used equipment, in good technical condition. Normal signs of use visible. ✅ Low hours – only 1,550h ➡️ Equipment is only lightly used ➡️ Significant potential for further operation

Condition: like new (used), Year of construction: 2018, operating hours: 41 h, As new mobile extraction unit from TEKA Model: Filtoo Csdpey Ey Rgefx Ad Nerb

Year of construction: 2019, condition: good (used), Dust extraction,welding fume extractor,cartridge filter self-cleaning,pneumatic,vacuum for plasma,laser,sandblasting,sodding,blasting and all kinds of dry dust. Brand: TEKA / Bystronic Model: Filtercube 4H / FilterBys Version 2 Year of manufacture: 2019 Filter cleaned by microprocessor controller with compressed air pulses during operation thus high efficiency of the device. Low compressed air demand thanks to the system "Power-Spray" The Filtercube central filter unit equipped with cartridge filters is the ideal solution for almost all problems in the area of smoke and dust filtration. Fan on the clean side which reduces the risk of explosion to a minimum. Application: central extraction system for multiple welding stations extraction system for welding robots extraction system for thermal cutting and grinding tables system for general hall filtering (push-pull system, displacement system) extraction system in combination with an extraction table extraction system for grinding of non-exploitable materials Parameters: 5.5 Kw fan Capacity 3800 m3/h Vacuum pressure 3250 Pa Inlet diameter : 250 mm Cedpfx Adonyhvqs Njrb Filtration area of 100 m2 Equipped with "DUST-VAC" unit , which automatically pumps the dust into a separate tank. Possibility to order new filter cartridges tailored to the customer's needs Technical documentation included.

Condition: used, functionality: fully functional, type of input current: three-phase, filter area: 20 m², suction capacity: 3,500 m³/h, negative pressure: 3,000 Pa, Mobile welding fume extractor, dust extraction unit, self-cleaning pneumatic vacuum filter TEKA. Model: TK-PF Mobile filtration and ventilation unit. Suitable for welding, grinding, and all types of dry dust. The filter is cleaned pneumatically by compressed air pulses during operation, ensuring high efficiency. Fan power: 1.1 kW – three-phase Max. capacity – 3500 m3/h Max. negative pressure – 3000 Pa 2 extraction arms, each 4.00 m long. Stock no. – 1106 Codsy Hq Rtepfx Ad Nerb

Condition: used, type of input current: three-phase, filter area: 40 m², suction capacity: 4,000 m³/h, negative pressure: 2,500 Pa, Welding fume extractor, dust extraction unit, self-cleaning filter, pneumatic, vacuum type by TEKA. Suitable for welding, grinding, sandblasting, and all types of dry dust. Cartridge filter elements. The filter is cleaned pneumatically with compressed air pulses during operation, ensuring high device efficiency. Fan power: 4 kW Capacity: 4000 m3/h Vacuum: 2500 Pa Filtration surface: 40 m2 Inlet diameter: 315 mm Crsdpey Hhd Defx Ad Nsb Device dimensions: Height - 2.50 m Width - 1.25 m Depth - 0.97 m Stock no. - 1116

Condition: used, functionality: fully functional, Year of construction: 2005, Concrete mixer TEKA TZK 2.0 Mixing capacity: 2 m³ Ceramic lining inside Csdpfsywn T Tjx Ad Nsrb Not yet dismantled

Condition: reconditioned (used), Year of construction: 2018, functionality: fully functional, type of input current: three-phase, overall weight: 500 kg, input voltage: 400 V, total width: 1,000 mm, total length: 1,000 mm, total height: 3,250 mm, volume flow: 3,000 m³/h, noise level: 75 dB, filter area: 100 m², suction capacity: 4,500 m³/h, negative pressure: 2,500 Pa, compressed air connection: 5 bar, power: 5.5 kW (7.48 HP), input frequency: 50 Hz, input current: 16 A, operating temperature: 20 °C, control voltage: 24 V, Equipment: documentation/manual, type plate available, Year of manufacture: 2018. 5.5 KW / 11.5A - Equipped with Softstarter and Siemens PLC control. - PRICE INCLUDES: 4x 25m² NEW filter cartridges mounted in the unit. - Fitted with compressed air cleaning system, Delta P controlled. - Equipped with TEKA DUSTVAC separate discharge system, allowing collection into a 200L drum! Credeyzqpljpfx Ad Nob - Ex works Soerendonk (NL), loaded on truck free of charge. Tested and working, can be demonstrated in our workshop. - Supplied with Softstarter option included. - PRICE INCLUDING: 4x 25m² NEW filter cartridges, fitted in the machine. - Fitted with compressed air dust discharge system, Delta P controlled. - Equipped with DUSTVAC dust discharge system, with this system dust can be collected in a 200L drum. - Ex works Soerendonk (NL), loaded on truck at no extra cost. - Sold as-is, with no warranty. - Tested on site and in our workshop, in proper working condition. - Testing and inspection possible.

Condition: used, Year of construction: 2010, type of input current: three-phase, filter area: 50 m², suction capacity: 5,000 m³/h, negative pressure: 3,000 Pa, Dust extractor, welding fume extraction unit, self-cleaning cartridge filter, pneumatic, vacuum-type for plasma, laser, sandblasting, soda blasting, shot blasting, and all types of dry dust. Brand: TEKA Model: Filtercube 2H Year of manufacture: 2010 The filter is cleaned by a microprocessor-controlled compressed air pulse system during operation, ensuring high operational efficiency. Low compressed air requirement thanks to the "Power-Spray" system. The central filter ventilation unit Filtercube, equipped with cartridge filters, offers an ideal solution for nearly all smoke and dust filtration applications. The fan is installed on the clean side, reducing the risk of explosion to a minimum. Applications: - Central extraction system for multiple welding stations - Extraction system for welding robots - Extraction system for thermal cutting tables and grinding stations - Unit for general hall ventilation (push-pull or displacement systems) - Extraction system combined with extraction tables - Extraction system for grinding non-explosive materials Specifications: Fan with soundproof casing, power: 4 kW Airflow: 5,000 m³/h Vacuum: 3,000 Pa Inlet diameter: 315 mm Filtration surface: 50 m² Crodpew Aw Nnjfx Ad Nsb New filter cartridges can be ordered to meet customer requirements. Stock number: 0004

Condition: good (used), Year of construction: 2009, Dust extraction,filtration,welding fume extraction,self-cleaning cartridge filter,pneumatic,vacuum TEKA AIRTECH P24 The main areas of application for the systems are industrial plants/welding shops where it is where it is not possible to realize spot extraction point extraction or where point extraction is not sufficient to maintain clean air on the shop floor. Side-mounted ducts with point capture point sucks in contaminated air air and lead it to the filter section. Here, contaminants in the form of fine particles cover the surface of the filter patron filter. An administered pulse of compressed air cleans the cartridge filters, automatically at the required intervals. After the impact of the compressed air, the particles collected on the surface of the filters break off off and fall into the dust tank. The cleaned air is returned to the work room through individually adjusted long-range nozzles. At the same time ejection of the purified air directs the contaminated air of the hall towards the toward the extraction channels. Filter cleaned by microprocessor controller with compressed air pulses during operation, thus high efficiency of the device. Low demand for compressed air thanks to the system "Power-Spray" The AIRTECH unit series is certified by IFA in accordance with EN ISO 15012- 1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent local extraction device of welding fumes. Parameters: Capacity - 24 000 m3/h Motor power - 15 Kw Fan in sound-absorbing housing Control cabinet with electrical documentation Year of production - 2009 Dimensions: Height - 6.80 m Base width - 1.95 m x 1.90 m Total width - 3.60 m x 2.00 m Csdel Dw U Dspfx Ad Njrb We have several pieces on offer. The price given in the ad for 1 piece.

Condition: good (used), Year of construction: 2010, Dust extraction,filtering,welding fume extraction,self-cleaning patron filter,pneumatic,vacuum TEKA AIRTECH P18. Csdpfsib Dadex Ad Nsrb The main areas of application for the systems are industrial plants/welding shops where it is where it is not possible to realize spot extraction point extraction or where point extraction is not sufficient to maintain clean air on the shop floor. Side-mounted ducts with point capture point sucks in contaminated air air and lead it to the filter section. Here, contaminants in the form of fine particles cover the surface of the filter patron filter. An administered pulse of compressed air cleans the cartridge filters, automatically at the required intervals. After the impact of the compressed air, the particles collected on the surface of the filters break off off and fall into the dust tank. The cleaned air is returned to the work room through individually adjusted long-range nozzles. At the same time ejection of the purified air directs the contaminated air of the hall towards the toward the extraction channels. Filter cleaned by microprocessor controller with compressed air pulses during operation, thus high efficiency of the device. Low demand for compressed air thanks to the system "Power-Spray" The AIRTECH unit series is certified by IFA in accordance with EN ISO 15012- 1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent local extraction device of welding fumes. Parameters: Capacity - 18 000 m3/h motor power - 11Kw vacuum - 2250 Pa Filtration area - 324 m2 ( 9 filter cartridges 36m2 each) Fan in sound-absorbing housing Control cabinet with electrical documentation Noise level - 72 dB Year of production - 2010 Dimensions: Height - 5.00m Base width - 1.44m x 1.44m Width with outlet channels - 8.5m Total weight about 2400 kg

Condition: excellent (used), filter area: 50 m², suction capacity: 650 m³/h, negative pressure: 38,000 Pa, High-pressure fume extractor, dust extractor, TEKA self-cleaning filter. Filter for plasma, laser. Due to its design, the system is particularly recommended for processing greasy, sticky fumes and dust. The device is equipped with an automatic system for impregnating cartridge filters and an activated carbon filter for neutralizing odors generated during processing. The filter is cleaned pneumatically with impulses of compressed air during operation, which results in high efficiency of the device. The extraction is designed for special applications where the filtered fumes and dusts may be soggy and sticky. By feeding the impregnant, moisture is captured from the smoke, which helps protect the filters from sticking. In this case, the life of the patron filters is extended. After the cleaning process, the control gives a pulse to the magnetic valve, located on the top cover of the powder-filled barrel. The applied magnetic pulse swirls the impregnant, which enters the suction pipeline. The powder covers the working surface and provides a protective coating for the filters. Cjdpfxerhidme Ad Njrb Unit like new - worked only 126 hours !!! Turbine with a power of 7.5 Kw. in a sound-absorbing housing with a silencer Capacity 650 m3/h at a vacuum of up to 38 000 Pa !!! Filtration area of 50m2 Inlet diameter : 100 mm Complete with , pneumatic gate valve , silencer and partial piping.

Condition: excellent (used), Power generator 85 kVA IFA – German production TECHNICAL PARAMETERS: diesel IFA 6VD14.5 / 12/2SRW engine generator VEB DGA 68/5 engine power 68 kW Cedpfx Adsivtazo Nsrb generator power max 85 kVA liquid-cooled engine six-cylinder dimensions (length / width / height) 270 / 120 / 210 cm weight 1300 kg

Year of construction: 2000, condition: good (used), Stock number: 2739 Manufacturer: TEKA Year of manufacture: 2000 Type: PP-DC Number: 201320 Volume flow: 320 m³/h Max. Negative pressure: 22.000 Pa Connection diameter: 50 mm Equipment: mobile, portable Accessories: hose 3.000 mm Connection: 1.2 kW 230 V Weight: approx. 40 kg Credpfx Ademf Uzxo Njb Dimensions: 300 x 300 x 850 mm without hose

Condition: new, 1860 m³/h Pressung 2.900 Pa 1,1 kW filter surface area 10 m² 72 dB(A) 400/50 V/Hz 665 x 1100 x 1495 mm 200 kg - Hose arm 3 m, joints inside - Filter cartridge: dust class M - Pre-filter: baffle plate - Current type: 3Ph+N+PE The filter system ----- The mobile filter system of the Cartmaster IFA type is thanks to the automatic Cleaning particularly suitable for welding work with unalloyed and alloyed steels, galvanized material and aluminum with heavy smoke development. It corresponds to the safety requirements for devices Welding fume class "W3" (high-alloy steels with alloy components > 30% Nickel-based alloy).If used as intended, the system can be used for the Recirculation mode used because the requirements for the Exceptions according to TRGS 560 are fulfilled. That special developed, dirt-dependent cleaning system ensures a good cleaning behavior of the filter cartridge, so that an optimal suction performance Cjdpfxjhp S Trj Ad Nsrb is guaranteed throughout the operation. The cleaned particles fall into a dust collection drawer from which they can then be disposed of. The powerful spiral fan ensures even with saturated Filter cartridges for a high volume flow. The filter media ----- A baffle serves as a pre-separator for coarse particles. The filter cartridge installed below (dust class M, degree of separation > 99%) filters the finest smoke and dust particles. The cartridge is factory coated which increases the service life. The extraction arm ----- The extraction arm can be moved with the 3 internal joints Position spring support slightly and is in the set position cantilevered. A throttle flap integrated in the extraction hood enables the Flow rate setting.

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, Two used TEKA scrapers are offered. Credpfx Asv Tb A Ijd Nsb 1. THS 4020, built in 2009, scraper arm: 16.00 m, 2. THS 6022, built in 1993, scraper arm: 16.00 m. Fully functional. For further information, see the rating plate.

Condition: new, volume capacity 2500 m3/h 0 3000 mm total power requirement 1,1 kW weight of the machine ca. 0,08 t Cedpfx Aefrzt Usd Nerb dimensions of the machine ca. 0,58x0,58x0,58 m

Condition: as good as new (ex-display), machine/vehicle number: 20170140, TEKA AirTracker Basic - Room Monitoring System Professional room monitoring system that measures particulate matter, temperature, humidity, and noise levels. Credpfx Adov Taq Ro Nob More than just a dust measurement system! Certified measurement sensors High-visibility LED display for dust levels Individual configuration of dust thresholds Dedicated TEKA Connect Wi-Fi AirTracker Control of fans or filter systems from the TEKA series Display and analysis of measurement data Display and readout of measurement data Trend display for evaluation / data logger Readout of data via web interface Wall-mounted, ceiling-mounted, and floor-standing units. One device – many possibilities! Built-in high-performance PC of the latest generation (MX6 with 2 cores) Wi-Fi control/UART The innovative, intelligent room monitoring system of the future. The European division of the World Health Organization (WHO) has urged the EU to impose stricter air quality standards. The innovative, intelligent solution from TEKA: AirTracker indoor air monitoring is used. The newly developed sensor in the TEKA AirTracker series detects particles smaller than 100 nanometers and impresses with its evaluation from 0 to 30 mg/m³ with an accuracy of ± 0.1 mg/m³, documented and with a test certificate. Creating trust. High-tech sensors guarantee reliable measurement values and safety. Individual settings of the threshold/limit values set the course for a secure future. As soon as the configured threshold is reached, the sensor indicates the current status of the particulate matter concentration via two highly visible, large LED strips with a traffic light function. The optionally available AirController can be used to control fans or filter systems from the TEKA series, depending on the particulate matter load. Ready-to-Go: Industry 4.0 – TEKA AirTracker. Companies can document compliance with employers' liability insurance regulations, manually or using the data logger (optional), in advance of BG inspections. Always keep an eye on prevention and employee health – building trust. Dust, whether coarse or fine – up to nanoparticles, particulate matter categories PM2.5 for A dust or PM10 for E dust – the TEKA AirTracker, with its newly developed sensor, monitors particulate matter within a radius of over 30 meters with an accuracy of +/- 0.1 micrometers and certifies this – feel safe. The TEKA AirTracker comes standard with other innovative sensors. It also measures air temperature, humidity, and sound levels. Networked sensors/actuators are the future of Industry 4.0. TEKA is already embracing this networked technology. TEKA sensors/actuators are already an integral part of industry. With a suitable smartphone, tablet, or PC, you can download the TEKA AirTracker app, which displays the current room temperature, humidity, particulate matter levels, and noise levels in the ambient air. Various setting and function options in the app round out its user-friendliness and functionality. There are many "dust sensors" available. However, quality and safety can only be achieved through the networking of certified sensors that document the measurement data.

Condition: ready for operation (used), Specifications: Supply voltage | V | 230 Frequency | Hz | 50 Run Hours: 2690 hours Type of current | Ph | 1. Engine power | kW | 2.4 Air flow volume max. | m³/h | 640 Negative pressure max. | Pa | 15000 Protection class | | IP54 ISO class | | F Extraction performance | % | >99 Width | mm | 365 Depth | mm | 768 Height | mm | 801 Weight | kg | 70 Sound pressure level | dB(A) | 70 Allowed ambient temperature | °C | +5 to +35 (during operations) | | -10 to +40 (during transport and storage) Codpfexvpumox Ad Njrb Max. temperature of polluted air at the capture point | °C | +50 Allowed max. humidity | % | 70 Good working condition. Please check out our other listings as well.

Condition: good (used), Year of construction: 2002, machine/vehicle number: 121630011, Offer 24386 Technical data: Credpfx Aou Aafdjd Nsb - Mobile cartridge filter unit with articulated extraction arms - suitable for welding mist extraction when welding - steel + stainless steel + aluminium + unalloyed or galvanized steels - Welding fume class W3 - Control with digital display - Separation efficiency 99 % - Air volume flow approx. 3000 m³/h - Max. static pressure 2500 pa - Filter area 20 qm² - Automatic filter cleaning - Articulated extraction arm 360° 4000 mm - Arm diameter 160 mm - Drive - fan 400 V / 1.10 kW - Space requirement approx. W 700 x H min. 2150 x D 1100 mm - Weight approx. 150 kg - Operating hours ( read ) 980 h

Condition: used, Year of construction: 2014, functionality: fully functional, power: 55 kW (74.78 HP), rotational speed (max.): 1,500 rpm, For sale: engine for cogeneration with generator. Crjdpfxexuvams Ad Nob

Condition: new, maximum load weight: 33,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space volume: 30 m³, Year of construction: 2026, Equipment: ABS, Chassis Welded construction, weight-optimized, made of high-grade S700 steel * Axle spacing 1310 mm, king pin distance to 2nd axle: 4800 mm * 3 axles – technical axle load 9,000 kg: SAF disc brake axles INTRADISC ET 120, air suspension * Axle lift on first axle (automatic/pneumatic) * 2” king pin, SAE standard (replaceable) * 2-speed landing gear, full load – side impact protection made of aluminum profiles (folding), compliant with ECE R73 * Underride guard, steel, according to ECE R58 – underride guard manually folding, spring-assisted * Fifth wheel height unladen: 1200 mm Brake system * Dual-line compressed air brake system, WABCO brand, ECE compliant * ABS EBS 2S/2M with vehicle stability control * Double diaphragm spring brake cylinders * Aluminum air tanks * Lifting and lowering device (HS valve) * Automatic tipper lowering, switchable * Air pressure gauge * ISO coupling heads, yellow/red Wheels and tires * Tires, 6x 385/65 R22.5 – aluminum rims, ABERG brand (22.5x11.75) ET 120 * Tire make: Hankook * Protective caps for wheel nuts Electrical installation * Lighting system 24V, ECE compliant * LED taillights, rectangular: Aspöck EcoLED III * LED lighting: license plate light, marker lights, side lights – with flashing function * LED reversing lights at rear – 2 units * Connection sockets at front: 2x 7-pin and 1x 15-pin, plus EBS socket (without cables) Body specification * Half-shell body made of high-grade steel, conical shape, volume 30 m³, internal height 1765 mm; floor 4 mm and side walls 3 mm made of HARDOX HB450; front wall and tailgate 4 mm, front wall inclined 20°, interior steps * Rear wall as resting pendulum flap, with automatic 2-hook locking, side tension latches, replaceable rubber seal, central slider with additional bolted closures at bottom * Rear wall attached using double hinge * Body damping: Polygon * Hydraulic cylinder, eye-mount, HYVA 250 Bar * Hydraulic connection kit 1" * Working platform mounted to chassis, access on left side (reversible) * PVC roll tarp 680 g/m² with quick release * Aluminum tarp bar with hand crank * Tarp bows, 3 pieces * Tension chain between the side walls Paintwork / Colors * Steel parts sandblasted twice before painting * KTL surface coating * Painted in spray booth * Frame: RAL 9005 deep black * Body: RAL 9005 deep black * Landing legs: black * Axles: black * Wheel hubs: black * Rims: aluminum Crsdpfsy I E Ebox Ad Njb * Attachments: galvanized * Roll tarp: RAL 9005 deep black Other features * 2 plastic wheel chocks * 6 individual mudguards (plastic), rear with splash guards * 44 L PVC toolbox, lockable, mounted on working platform right * 30 L water tank with soap dispenser, mounted on chassis left * Aluminum access ladder L=2840 mm, above right mudguard * Continuous mudflap on underride guard * Partial contour markings according to EC guidelines * Partial contour markings with Wielton logo, side white, rear red * Reflective warning signs Additional systems * Control line for lift axle from driver's cab * TPMS sensors for tire pressure and temperature monitoring, manufacturer: ABERG Connect

Condition: used, mileage: 28,237 km, power: 92 kW (125.09 HP), first registration: 12/1981, color: red, gearing type: mechanical, * Internal No.: 1097 - 1098 * IFA Automobile - Special Vehicle Cjdpfx Aewibxgjd Norb * EZ 12/1981 * Week 92 * KTA Type Approval - Trailer * 10-seater * The customer is obliged to check the condition and equipment of the goods/vehicle for themselves! * etc. * Vehicle may be in use / mileage and condition may vary * All information is subject to change without notice * We reserve the right to sell the vehicle prior to purchase * Please refer to our Terms and Conditions

Condition: used, mileage: 19,578 km, power: 92 kW (125.09 HP), first registration: 03/1988, fuel type: diesel, overall weight: 9,700 kg, axle configuration: 2 axles, color: red, gearing type: mechanical, total width: 2,500 mm, total height: 3,000 mm, According to our "General Terms and Conditions" and extended business terms, and without any guarantee or warranty, we are able to offer you the following vehicle today, subject to prior sale and errors, and non-binding until conclusion of contract: IFA W 50L LF Fire Truck with Double Cab, Pump + Tank First registration: 10.03.1988 19,578 km (original mileage) Engine: 6,560 cc 92 kW / 125 HP Permissible gross weight: 9,700 kg, unladen weight: 8,150 kg, payload: 1,550 kg Overall length: 7,700 mm x overall width: 2,500 mm x overall height: 3,000 mm Double cab, 2 seats in front, 7 in the rear 2 x rotating beacons at the front, 1 x rear passenger side, plus 1 x strobe left and right rear, roof-mounted Front towing eye Power supply/utility connection front passenger side 2 x hose holders on the roof, walk-on roof rack 2 x water connections each, driver and passenger sides at the rear, 1 x rear Water tank under the vehicle Hose reel Complete pump unit Cjdpfx Adjyv Tkue Nsrb Trailer coupling Hose reel holder rear Work spotlight rear upper 2 seats front, 10 seats rear 5-speed manual transmission Manual sliding roof Parking heater Siren Good general condition Price: € 4,500.00 (VAT not deductible) All information is provided without any guarantee or warranty. Our "General and extended Terms and Conditions" apply. Jurisdiction for both parties up to a dispute value of € 10,000 is the District Court of Ludwigslust; for higher dispute values, the Regional Court of Schwerin. Subject to errors, typos, and prior sale.

Condition: used, - Model: IFA/100 - Flour capacity: 65 kg - Dough capacity (mix): 100 kg - Bowl volume: 145 litres - Power: 5.7 kW - Dimensions (W x D x H): 75 x 120 x 152 cm Codpfx Adjw Durij Nsrb - Weight: 480 kg - Frame: heavy-duty steel, mounted on wheels - Motors: 2 double-speed motors (one for the spiral, one for the bowl) - Bowl, spiral, central column, and safety guard: stainless steel The pre-owned IFA 100 fixed-bowl spiral mixer is a professional-grade machine designed for craft bakers and pastry chefs who demand performance, durability, and cost-efficiency. Manufactured by ALDEGHERI FORNI, this mixer is renowned for its Italian build quality and long-term reliability. Tjy Tew Duriodxugeb With a 65 kg flour capacity and a maximum dough output of 100 kg, it is ideally suited for medium to large-scale production. The 145-litre stainless steel bowl, along with the spiral and guard, ensures optimal hygiene and easy cleaning. The IFA 100 spiral mixer features a heavy-gauge steel frame mounted on wheels, providing both stability during operation and ease of movement when required. Its two double-speed motors enable efficient and versatile kneading, adaptable to various dough consistencies. The integrated low-voltage (24V) electric control with timers allows precise and safe operation, whether in manual, semi-automatic, or fully automatic modes.