Used Thermo Forming Machine for sale (67,478)

Condition: excellent (used), Year of construction: 1992, operating hours: 41,685 h, Technical specifications: Rated power, kW: 11,3 Hedpfx Absq A Um Rj Nonl Mold area, mm: 475 x 250 Max. film width, mm: 495 Min. film width, mm: 150 Max. feed length, mm: 280 Min. feed length, mm: 50 Max. drawing depth/negative, mm: 100 Number of cycles/min.-max.: 48 Consumption of air/cycle at 6 bar: 100 Nl (net-pressurized air) Heat energy to be dissipated: with top heating ca. 10 260 KJ/h with top and bottom heating ca.: 17 715 KJ/h Special equipment: Hollow floor facility available Control cabinet: included

Year of construction: 1988, condition: excellent (used), machine/vehicle number: 3284, (min.) material thickness: 0.65 mm (max.) material thickness: 2 mm Hnjdpfxjhbu E Hs Ab Nol Technical Data: Width of film, max./min. 450/350 mm Forming area max. 430 x 160 mm Drawing depth max. negative/positive 6/20 mm (on request 22 mm negative) Top heater max. 10,15 kW Driving motors 3,0 kW Total connected load at 100 % duty cycle 12,7 kW Working air pressure 6 bar Air consumption (dependent on product) max. 1250 I/min Rate of water flow max. 1,0 m3/h COMPACT AND ROBUST - giving continuous high output. Easy and ergonomical operation (e.g. take- off height 1300 mm). QUICKLY CHANGEOVER - from 30° to 90° foil feed giving maximum material utilisation for both square and round lids. Heater changeover problem-free. PRECISION - The accuracy of the form table movement is guaranteed by linear guide bearings and hardened rods. The safe reliable guarantee for precision. OPTIMUM PUNCHING ACCURACY EVEN DURING MAXIMUM OUTPUT Cam controlled function sequence guarantees absolute precision with every cycle.

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: 403, THERMO FORMING MACHINE TFT IMC 5030 (WITH TOOLS) Equipment / Additional information: unwinding: Roll recording: easy Max roll diameter: mm 1000 Settlement: automatically Thermoforming machine: Maximum tool dimensions: mm 520x330 Pos. Molding height max .: 15 mm Neg. Molding height max .: 120 mm Sheet width: mm 150/760 Movement Step: mm 50/330 Max HIPS film thickness: 1.8 mm Hub of the sub-table: 150 mm Clamping force: 7500 Kg Inst power top heater: 18.8 Kw Inst power under heater: 14.1 Kw Idle clock speed: per minute 40th Hedpfxjn D Ew Ie Ab Nsnl power main drive motor: 2.2 Kw Engine power. Film feed: 0.75 Kw Air operating pressure: Kg / cm2 7 Water consumption at 12 °: 1t / 1` approx.30 Air consump. at 7 kg / cm2: 1t / cycle 125 Installed power: Kw 50 9xTool: Article no. // Tool no. // Cavities // Description / Product: 3599 // 457 // 10 // Vending machine cup capacity/capacity/contenance=223ml 593 // 460 // 8 // Coffee-to-go / thermo mug / thermo cup Filling capacity / Capacity / Contenance=300ml / 12 oz 509 // 452 // 6 // Ice cream cup: filled to the brim=140ml / Filling capacity with headspace 6mm: 120 ml 591 // 459 // 10 // Thermo mug ⌀ 81/180ml 740 // - // - // Standard cup with sealing edge ⌀ 75-120ml 3589 // 458 // 12 // Coffee-to-go / thermo mug / thermo cup: Filling capacity / Capacity / Contenance=80ml 595 // 456 // 10 // Vending cup / Gobelet pour automate: Filling capacity / Capacity / Contenance=150ml 210 // - // - // Baking case / technical part / plate or tray 8000 // 455 // - // Granule cup 180 ml / technical part with flat sealing edge

Condition: excellent (used), Year of construction: 1999, operating hours: 80,188 h, machine/vehicle number: 322, Max. film width 700-800 mm Equipment / Additional information: -GREINER STACKING / Transfer device R3 (Ref. No.: 95002.24) // M. No.: 00020 // Age: 1998 Heating from above and below Material PS and PP were processed Hedpfx Asq Nn Hceb Nonl 450 Ps // 350 Pp The following tools were used on the machine: 8-way WZ-Ø95 and 15-way WZ-Ø73 and 15-way WZ-Ø86 Packaging was produced especially for the dairy industry. The cycles are 18-25 strokes - depending on the cup weight.

Condition: new, Year of construction: 2017, functionality: fully functional, operating hours: 25 h, input voltage: 380 V, type of input current: three-phase, total height: 1,500 mm, total length: 5,200 mm, total width: 2,350 mm, overall weight: 2,500 kg, saw band length: 520 mm, saw band width: 580 mm, New machine. Hnodpfx Aeunia Hsb Njl

Year of construction: 2006, condition: repair required (used), Repak thermoformer, type: RE 25, machine number: 2500020, year of manufacture: 2006, 220/240 V, 3 Ph, 50 Hz, 12 kW, 30 A, die: (12x) 85 mm x 110 m. Spare parts for sale. Picture 1. Controller, electronic components, tools, vacuum pump, frame parts, etc. Comes with tools of various sizes. Sold in the condition shown in the photo. Complete forming parts set €4000. See picture 2. Flender motor ZF48-M100LB4, €250, picture 3. Busch vacuum pump Wv1000B-001 KDFC, €1200, picture 4. Automatic double-line label printer and spreader, complete, €1500, picture 5. Rotary cutter for hard foil, €500, picture 6. Outfeed conveyor, €300, picture 8. Selling as a bundle for €2000, as is. Complete die set €2000. Hedpfou Hz Tdjx Ab Nsnl HMI and electronic components. Other parts.

Condition: new, Year of construction: 2025, Roll forming metal siding “double façade panel” machine SPM-2 Roll forming metal siding “double façade panel” machine SPM-2 is new design product of our company for façade and wall metal panels forming with the necessary configuration. Hsdpfxoxghngj Ab Njnl These double façade panels are very popular in construction business of cladding residential buildings and industrial structures, for the construction of fences of various configurations, gazebos, roofing elements, etc. The SPM-2 metal siding production line is fully automatic and consists of a rolling part of the machine, an automation system and guillotine cutting shears at the machine exit. The line can have as additional parts a manual or automatic uncoiler for metal rolls, depending on the customer's needs. As standard version, this metal siding double façade panels roll forming machine SPM-2 makes a flat panel profile, but with the additional equipment, it is possible to roll panels with a microwave or rib shape profile. To start rolling, it is necessary to install a roll of metal to the decoiler and to put the end of the strip to the first rolling rollers of the equipment and feed it into them. After step by step, to put the metal to the next rollers, adjusting it if necessary. When metal comes to the cutting device of machine you need to feed metal into cutting knives and to make “zero” cut. After such step, equipment can move to automatic operation mode. The control panel of machine has the ability to set the number of tasks and the length of products, single tasks or to work in multitasking mode. After setting up necessary parameters the machine will automatically roll the metal cladding wall panels and cut them into necessary sizes. Thus, the customer will receive final product as quickly as possible and with the highest possible result. The roll forming speed is adjustable and can be up to 10-15 meters per minute. The SPM-2 metal wall cladding panels production line has special tools for punching out fastening holes on the side of the panel. It makes possible for the customer to get more interesting solution options and to offer a wider range of products to the end user. The rolling part of the machine has 18 pairs of forming steps, ensuring high quality of final product. You can get machine with protective cover or without it as per your request preferences. Specifications Material width (mm) 416 The material thickness (mm) 0,4-0,5 Engine power (kW) 3 + 1,1 Rolling speed (m/min) 10-15

Year of construction: 2010, condition: excellent (used), functionality: fully functional, 1 x Giemme Thermo Packaging Machinery S.r.l. semi-automatic shrink bundling machine. Model – ALTAIR 70 P. Serial number – 001.041.10. Hedpoyzxgfjfx Ab Nonl Date of manufacture - 2010. Speed – up to 12 packs/minute. Electrical supply – 400 V / 50 hz / 3 phase. Power – 20 kW. Overall dimensions – 3000mm long x 1200mm wide x 2000mm high.

Year of construction: 1998, condition: excellent (used), machine/vehicle number: ExCello Serial Number 3888, MICHIGAN Rotoflo Type 3237 Cold Forming Machine. Original Serial Number: 4590 ExCello Serial Number 3888 New 1975 rebuilt by ExCello late 1990’s Country of Origin: USA For the coldforming of profiles for serrations (straight or angular), spiral teeth, oil grooves, threads and knurls. Hnjdpfx Aefnk Eheb Njl Capacity: Maximum slide stroke 1065 mm Maximum rack length 915 mm Maximum profile diameter 50 mm Maximum profile length 125 mm Standard module range 0.3 to 1.25 Motor size 15 kW Hydraulic tank capacity 1000 l Overall floorspace width of machine 5014 mm Width of machine 2768 mm Depth with outboard support 4165 mm Height 2000 mm Approximate weight of machine 11,700 kgs Complete with: Hydraulically operated outer support assembly to accommodate part length universal headstock, Universal rack holding feature.

Year of construction: 1973, condition: used, Illig UA100d Vacuum Forming Machine, Manual Loading of Material Sheets, Forming Area 960 x 560mm. Serial No. 2167 (1973). Country of Origin: Germany Hnjdpfxsy Shcqe Ab Nel Location: These lots are located in Gateshead, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Tube ends – forming machine BLM (Italy) Hedpoy St Iljfx Ab Nenl used tube end forming machine BLM for tubes with six-position turret Drive power: 7.5 kW max. tube diameter approx.: 40 mm Max. forming length estimated: 80 mm Weight approx.: 1.5 t

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, total height: 1,650 mm, total width: 1,400 mm, total length: 2,000 mm, Equipment: documentation/manual, Ideal machine for very flexible bags (Vol up to 60 Liters) Impusl sealing for PE-Films Bagsize up to 420 (option 550) mm and baglenght 800mm control operated via touchscreen terminal and recipe management. Hnodpey Rtk Defx Ab Nsl Machine is in very good condition.

Condition: ready for operation (used), Year of construction: 1995, A horizontal flow-pack packaging machine Cavanna is available. An on-site inspection is possible. Hnodpfx Aoy R Dtieb Nsl

Condition: ready for operation (used), A horizontal flow-wrapping machine used in the food industry is available. Packaging weight min/max: 80g/1000kg. On-site inspection is possible. Hnsdpjubbzzsfx Ab Nsl

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 0083/2022, compressed air connection: 8 bar, input voltage: 240 V, power: 1 kW (1.36 HP), We are offering this used Ravizza Packaging SIMPLICITA BAG SMART 600H form-fill-seal bagging machine, year of manufacture 2022. Manufacturer: Ravizza Packaging SRL-Torino Italy Model: SIMPLICITA BAG SMART 600H Serial number: 0083/2022 Year of manufacture: 2022 Voltage: 220/240 V Power consumption: 1 kW Air connection: 10x8 Hsdpfxey Sgrqe Ab Nsnl Air pressure: 6/8 bar If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, GEA MultiFormer 400 | Plate Former Manufacturer: GEA Food Solutions Bakel B.V. Model: MultiFormer 400 Machine No.: E022110205415 Year of manufacture: 01/2021 Machine weight: 1200 kg Power supply: 380–415 V, 3-phase, 50 Hz Power (kW): 8 kW Current consumption: 15.4 A Belt: Stainless steel mesh belt, width 400 mm Machine dimensions: 3100 × 1000 × 2700 mm Additional equipment included: Forming plates: 2 pallets with a set of plates for various product shapes. Service stand: Made of stainless steel, equipped with 2 additional discharge belts (width 400 mm). Dimensions: 1350 × 600 × 2100 mm. Hnedpfxsy Sbzmj Ab Njl Tool trolley: Original GEA trolley for easy storage and changeover of forming parts. Dimensions: 1200 × 700 × 950 mm. The GEA MultiFormer 400 is a professional food forming machine utilizing proven plate technology. This 2021 unit features a modern design “Made in the Netherlands” that ensures maximum hygiene and production precision. The system allows for quick product changeover – from classic burgers and nuggets to custom 2D and 3D shapes. Thanks to its stainless steel mesh belt and the included discharge belt system, the machine is ready for direct integration with coating, frying, or freezing lines. The included tool trolley and complete set of forming plates make this package an extremely flexible solution for meat, poultry, and plant-based food processing plants.

Condition: excellent (used), Year of construction: 1981, functionality: fully functional, equipped with: 1 Right hand feeding system 1 Eccentricpress 250 kN 4 Standard slide unit 1 Narrow slide unit Hjdpfx Absr D N Eqe Nonl working range: wire diameter range: up to 6,0 mm stripmetal width: up to 80 mm feeding length: up to 520 mm output: 10 - 250/min

Condition: reconditioned (used), Year of construction: 2026, CARLO SALVI DL 560 RF Refurbished like new Closed cutoff New mechanical parts New electrical system CE compl. with Inverter, PLC and remote assistance Supplied with conveyor belt and control process Brankamp Full revised by H.B.R. srl Technical details: Number of dies: 1 Number of punches: 2 Diam. raw material min/max: 2 - 5 mm. Max length under the head: 60 mm. Max length cutoff: 75 mm. Hole depth: DIN 7338B Diam. head max.: 10 mm. Speed max: 440 pz./min. Hnodpoy Rzgasfx Ab Njl Forza max. taglio: 1.500 daN Forza max. di stampaggio: 11.000 daN Peso netto macchina: 6.000 kg. Potenza motore: 9 Kw Occasione da non perdere! Come on in HBR to look the machinery! Visit our Company!

Year of construction: 2015, condition: ready for operation (used), Complete VEMAG Hamburger Production Line Manufacturer: VEMAG Maschinenbau GmbH – Germany Line Model: Roobot 500 + FM250 + SC261 Equipment Set Condition: Used, very good Year of manufacture: 2015 / 2020 Set Description The offered VEMAG hamburger production line is a fully automated system designed for forming, portioning, and arranging meat, poultry, fish, or plant-based burgers. Equipment from the renowned manufacturer VEMAG ensures high output, precise portioning, and excellent shape consistency, all while maintaining high hygienic standards in production. The line consists of three main components: 1. VEMAG ROOBOT 500 Filler (year 2015) Automatic feeding system – the main drive of the line. Controls the movement and dosing of filling to the forming machine. Equipped with a supply system with precise portion control. Ensures consistent performance and weight accuracy. Made of stainless steel with a hygienic design suitable for pressure washing. Key technical data: Output: up to 6,000 portions/h (depending on raw material) Portion range: 20 to 300g Drive: electric / pneumatic 2. VEMAG FM250 (year 2020) Burger former – the latest element of the line. Forming burgers, patties, meatballs, plant-based and fish products. Variable shape and thickness – matrix dies easily exchangeable. Integrated forming plate system with adjustable size. Hjdpfoy Rp Tbex Ab Nsnl Ideal for precise forming of products with a premium surface finish. Technical data: Burger diameter: 60–130 mm Output: 100–180 cycles/min Material: AISI 304 stainless steel Integration with Roobot 500 3. VEMAG SC261 (year 2015) Belt reception conveyor / separator: Receives formed products and arranges them in rows. Variable belt speed and direction. Easy disassembly and cleaning. Technical data: Material: stainless steel Control: electronic; compatible with FM250 Line applications Production of meat, poultry, fish, and plant-based burgers Food processing, meat, and convenience food plants Ready-meal and fast-food manufacturers Even portioning for freezing or MAP packaging Complete, ready-to-use set – full device compatibility High productivity and repeatable product quality Low noise emission, easy-to-clean construction Suitable for various masses: meat, vegetarian, fish Optimized raw material usage and staff efficiency Fully hygienic all-stainless-steel construction Modern control panel and process parameter adjustment

Condition: used, CORRUGATED SHEET METAL ROLL FORMING LINE – SGP Costruzioni Meccaniche Composed of: • EGB 401 MAT 11/98 roll forming machine with 18 stations • Motorized decoiler mod. AS/P 10x1250 • Loading cradle • Infeed table unit • Fixed start/stop cutting unit • Discharge table • Stacker Hnjdpfx Ajy Smxwob Njl • General control panels with console system

Condition: new, Fully automated machines for the trapezoid roll forming, in various sizes. Please, contact us in order to receive further information as well as the technical documentation. Hnedpfjyr Nkbox Ab Njl

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, Packaging machine Beck Fitpacker Junior FJ 1040 U - Used machine, year of manufacture 1998 - Minor repairs required The Fitpacker Junior offers high packing performance and is capable of processing products of various lengths in random order. A programmable logic controller (PLC) is mounted at the top of the control cabinet and can be easily operated via an intuitive interface. The packer is also equipped with a feed system specially designed for continuous line operation. Machine changeover times are minimized through a digital user interface and an adjustable forming shoulder. The control cabinet can be opened and swung out, ensuring optimal access for maintenance and reducing downtime. The film roll holder is positioned at an ergonomically appropriate working height. Operating speed: The actual production speed and effective net output depend on the format, type, and composition of products and can reach up to 2,000 packs per hour. Features: - PLC control - Film overlap for waste-free operation - Ionization at film overlap - Adjustable forming shoulder - Wide seam sealing Technical data: Width adjustment range: 100 – 400 mm, stepless lateral adjustment Max. product pass-through height: 150 mm Connected load: 3 kW Dimensions (LxWxH): 2,700 x 1,800 x 1,700 mm Weight: approx. 750 kg Hnodpfx Ajy H Egieb Njl Colour: Hammer finish paint, light grey

Condition: new, 6.5 mm multi-axis springs and wire forms generator, featuring up to 16 axis, including wire rotation, one motor per slide, OD control and other nice features. The machine is widely used for agriculture double torsion springs, but not only : it can produce an extensive range of torsion, double-torsion, extension springs, as well as wire and strip forms Hodpfx Absi Ik Aye Nsnl

Condition: new, Cam-driven spring forming machine. A well-proven machine which each spring manufacturer should have in its spring shop for one the best ratio 'price / quality of production' on the market. Hnsdpfx Asi Ik Hrsb Nsl

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, input voltage: 230 V, type of input current: AC, input frequency: 50 Hz, DGUV certified until: 05/2027, White Electric Spritz Pastry Device Spritz pastry machine, electrically operated Model: ESFG with wall mounting bracket DGUV V3 tested Stepless adjustment Connection 230V, ready to plug in Hnodpfx Aoy H Ur Ueb Nol Used machine Option: Quark balls Spritz pastries Ring doughnuts / Donuts