Used Tilgert Pinch Roll Unit/Felt Brake/Crop Shear for sale (49,711)

Year of construction: 1999, condition: good (used), pinch roll unit/felt brake/crop shear for slitting line strip width: 500 - 1.650 mm strip thickness: 0,4 – 4 mm Hodpfjgryl Asx Adzer No. of pinch rolls: 2

Year of construction: 1999, condition: good (used), pinch roll unit/felt brake/crop shear for slitting line strip width: 500 - 1.650 mm strip thickness: 0,4 – 4 mm Hodpjgm E Rdofx Adzer No. of pinch rolls: 2

Year of construction: 1999, condition: good (used), pinch roll unit/felt brake/crop shear for slitting line strip width: 500 - 1.650 mm Hodjgm E Rlepfx Adzer strip thickness: 0,4 – 4 mm No. of pinch rolls: 2

Year of construction: 1983, condition: good (used), strip width 1.600 mm strip thickness 0,3 - 3 mm reference material (tensile strength) 420 N/mm² Hedobidg Eepfx Adzsr speed 68 m/min. at 6.000 mm plate length 23 m/min. at 400 mm plate length

Year of construction: 1980, condition: used, strip width 120 - 300 mm Hjdpfxolil Eps Adzor strip thickness 1 - 5 mm reference material (tensile strength) 800 N/mm²

Year of construction: 1980, condition: used, strip width 120 - 300 mm strip thickness 1 - 5 mm Hodpfxebidc Us Adzor reference material (tensile strength) 800 N/mm²

Condition: used, strip width: 100 mm strip thickness: 0,4 - 3 mm speed: ca. 14 m/min No. of levelling rolls: 7 Hedpfexc Hr Ajx Adzor No. of pinch rolls: 2 control as new

Condition: used, strip width: 100 mm Hjdpfx Adexc Htmjzjr strip thickness: 0,4 - 3 mm speed: ca. 14 m/min No. of levelling rolls: 7 No. of pinch rolls: 2 control as new

Condition: used, strip width: 100 mm strip thickness: 0,4 - 3 mm speed: ca. 14 m/min No. of levelling rolls: 7 No. of pinch rolls: 2 control as new Hodpfexc Ht Tex Adzsr

Condition: used, strip width: max. 450 mm Hjdpfsxc Hytox Adzsr strip thickness: max. 12 mm speed: max. 20 m/min No. of levelling rolls: 3 No. of pinch rolls: 2 revised 1995

Condition: excellent (used), Year of construction: 1980, strip width: max. 1.750 mm strip thickness: 0,5 – 3 mm speed: max. 160 m/min Hjdpfexaz Sfsx Adzjr No. of pinch rolls: 2

Condition: used, strip width: max. 450 mm strip thickness: max. 12 mm Hodpfx Adoxc Hygjzor speed: max. 20 m/min No. of levelling rolls: 3 No. of pinch rolls: 2 revised 1995

Condition: used, strip width: max. 450 mm Hjdpsxc Hyyefx Adzor strip thickness: max. 12 mm speed: max. 20 m/min No. of levelling rolls: 3 No. of pinch rolls: 2 revised 1995

Condition: excellent (used), The geared motors are fully functional, tested, and ready for use. Their technical condition is very good, with only normal signs of wear and tear resulting from operation. Condition of individual units: Hsdpfx Adsznnxuozor 1 unit has a small dent in the fan cover (visible in the photos). 1 unit has a minor seal damage (crankshaft seal) – visible in the photo. The price applies to 1 unit. Technical data: Manufacturer: SEW-EURODRIVE Motor type: DT80K4/BH6/HR/TF Power: 0.55 kW Motor speed: 1360 rpm Output speed: 54 rpm Three-phase motor Electromagnetic brake Protection class: IP54 Insulation class: F Country of manufacture: Austria The scope of sale includes exactly what is shown in the photos. The geared motors are ideally suited for driving conveyors, feeders, production machines, packaging machines, and other industrial equipment. The price stated in the advertisement applies to one unit.

Condition: new, Year of construction: 2026, power: 10 kW (13.60 HP), pressing force: 100 t, overall weight: 9,000 kg, 2 in 1 = Press Brake + Shear bending length 3040 mm, Press capacity 100 to, Hodpfx Adjd Hn Taszsr Shear capacity L = 3200 mm x 6 mm, throat 200 mm, working high 640 / 1240 mm, Control CYBELE CybTouch 15, mot. gauge 700 mm, shadow cutting line, motor 10 KW dimensions 3700x1900x2400 mm, ca. 9000 kgs same machine available L = 2000 mm und L = 1400 mm

Condition: used, Year of construction: 2008, Punching-shearing unit, complete Manufacturer: GEKA Year of manufacture: 2008 MODEL: ALPS-150 Production hours: 400 Application type: Shearing Machine type: Shearing machine Control unit brand: Fagor Technical specifications: General data Width: 2200 mm Depth: 1350 mm Hsdpfxeudbzyo Adzjr Height: 2400 mm Weight: 5000 kg Control unit Manufacturer: Fagor Model: CNC 8070 CNC main language: English CNC language customizable: Yes Main drive shear force 2500 kN Workpiece X : 15000 mm Workpiece Y: 160 mm Workpiece Z: 200 mm Max. table load: 400 kg Max. material thickness: steel 16 mm Electronic main connection 50 hz/3P Additional equipment: 3xloading table 3xside loading table 3xunloading table This GEKA ALPS-150 was manufactured in Spain in 2008 and has been in production for 400 hours. production hours. This machine is a complete automatic solution for punching, marking and shearing angles for medium and large steel profiles. With few working hours this machine is in perfect condition.

Condition: used, Sheet Metal Working Machine Set Hodpfx Aoznkl Redzjr Available November 2026 • Hydraulic Press Brake – OMAG Brand: OMAG Bending length: 4,000 mm Ideal for sheet metal bending • Hydraulic Guillotine Shear – OMAG Brand: OMAG Cutting length: 4,000 mm Ideal for cutting sheet metal

Condition: new, Year of construction: 2026, control type: CNC control, KBA - Combined CNC-controlled press brake / guillotine shear Super-compact machine with a very small footprint. Maximum cutting length: 3,020 mm or 2,020 mm Rated cutting capacity: 6 mm steel sheet / ST 40 Cutting angle: 1°30″ Backgauge for the shear station – adjustment range: 750 mm Table height: 750 mm Maximum bending length between side frames: 3,550 mm or 2,505 mm Maximum pressing force: 1,000 kN Working height for bending: only 1,230 mm Stroke range (bending station): 175 mm Maximum installation height (bending station): 350 mm Backgauge adjustment range (bending station): 750 mm Dimensions including operator’s pendant: 4.25 or 3.25 m x 1.82 m x H 2.8 m Required floor space: 3.85 or 2.85 x 1.82 m Hedpfxezhklks Adzjr Drive power: 10 kW Weight: 9,000 kg or 7,500 kg Equipment: - CNC control with touchscreen and 10” colour display, graphical user interface, and automatic bending angle calculation - 1 set of press brake tools (bending punch + four-way reversible die) - Sheet metal supports for the press brake station - 90° angle stop for the guillotine shear with 1 m length - Bending station working area safeguarding via light barriers, rear area safeguarded by lateral safety guards and light barriers Optional: - Front bending area guarding by PILZ® camera monitoring - Rotatable angle stop

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 104605-104645, input voltage: 400 V, total width: 1,500 mm, total length: 4,500 mm, total height: 2,820 mm, type of input current: three-phase, Fortuna Primus K4 – 4-row roll divider – rounder + depositor + GEK, year of manufacture 2011 Hsdpfx Adsy St U Sezsr Dough divider & rounder Condition: fully functional, directly from ongoing operation Application: round rolls, e.g., Kaiser rolls, braided rolls, salt rolls, wheat & mixed doughs • Weight range: approx. 40-110/120 g • Hourly output: approx. 4,800 pieces/hour • Rounding chamber height: approx. 10–35 • Rounding speed: scale 0–30 • Hopper volume: 20–25 kg • Dough yield: TA 160–165 • Connection power: approx. 1.5 kW • Machine weight: 650–700 kg • Depositor: for 60 × 80 cm trays (58–78) _____ Equipment • Fortuna Primus K head machine • 4 rows • GEK pre-fermentation cabinet matching the line • Rounding/stamping sets: Kaiser rolls, braided rolls, salt rolls • Complete depositor • Immediately ready for operation • In use until recently • Clean, well-maintained, regularly serviced • No known defects • Electronics modernized (new display) INSPECTION and TRIAL RUN possible (only) by appointment Freight possible, fully assembled with a jumbo truck (L/W/H = approx. 4,500 mm x 1,500 mm x 2,820 mm)

Year of construction: 1973, condition: like new (used), Used BRONX Heavy Duty Initial Pinch Pyramid bending rolls. Year of manufacture : 1973. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION CAPACITY Two sets of dimensions which are shown below as "Prebending & Rolling" and then "Rolling only". Material Mild Steel Mild Steel Tensile strength 28/32 tons/sq.in 28/32 tons/sq.in Maximum width 11’(3350mm) 11’(3350mm) Maximum thickness at this width 2” (50mm) 2½” (63.5mm) Minimum inside diameter of rolled cylinder at maximum capacity 30’ (762mm) 37 ½’ (953mm) Maximum thickness of plate when hot rolling (finished rolling temperature 850° C.) 4” (102mm) 5” (127mm) Minimum inside diameter of rolled cylinder at maximum capacity hot rolling 40” (1016mm) 50” (1270mm) MAIN PARTICULARS Diameter of all rolls - 27” (686mm) Body length of rolls - 11’2”(3403mm) Rolling speed - 12 f.p.m. (3600mm/min) Main drive motor - 150 H.P. Slip Ring Type Two bottom roll adjusting motors, each - 50 H.P. Slip Ring Type Combined operation of swing down bearing and top roll counterbalance - Hydraulically applied Hydraulic power pack motor - 10 H.P. Electrical equipment to be suitable for operation on a supply of - 400/440 volts, 3 phase, 50 cycles CONE ROLLING ATTACHMENT: To facilitate the rolling of taper or conical forms, a skid plate is fitted to the inside of the non-drive end housing. ELECTRICAL EQUIPMENT Motors: Main Drive - 150 H.P. half hour rated – slip ring screen protected – foot mounted type. Bottom Roll Adjustments - 50 H.P. half hour rated – slip ring screen protected – foot mounted type. Hydraulic Power Pack Motor - 10 H.P. continuously rated – Squirrel cage – screen protected – foot mounted type. Control Gear: Main Drive - Drum type reversing control gear with 5 minute rated wire wound resistances, designed to pass 100% full load on the first notch or operating position in each direction. The controller will be fitted with off position interlock and limit switch rings where necessary. Bottom Roll Adjustments - Drum type reversing control gear with 5 minute rated wire wound resistances designed to pass 100% full load on the first notch or operating position in each direction. The controllers will be fitted with off position interlock and limit switch rings where necessary. Hydraulic Power Pack - Direct-on-line contactor type starter, operated from a maintaining type push button station. Solenoid valves for operating cylinders are push button operated. Note: Full protection to be provided for all the above control gear by a circuit breaker, incorporating overload and no-volt protection. FEATURES AND EQUIPMENT Spare Roll included with the machine. LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM WEIGHT 95 tonnes NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy. Hjdpfx Aeh U Rzgsdzer

Condition: used, Used Press Brakes and Shears available – various capacities and working lengths Photo 1 – Press brake GEKO – 100 ton – 3050 mm Photo 2 – Synchronized press brake VICLA – 125 ton – 3100 mm Photo 3 – Synchronized press brake WARCOM FUTURA – 200 ton – 4550 mm Photo 4 – Press brake GADE – 50 ton – 4050 mm Hsdpfjyabn Uex Adzjr Photo 5 – Press brake CML – 100 ton – 4100 mm Photo 6 – Shear GEKO – 3050 x 6 mm Photo 7 – Shear VICLA – 3050 x 8 mm Photo 8 – Shear BL – 3050 x 5/7 mm Photo 9 – Shear AMADA – 4000 x 8 mm Photo 10 – Shear OMAG – 2050 x 4 mm

Year of construction: 2010, condition: excellent (used), functionality: fully functional, machine/vehicle number: S/N69515, Sheet Wizard 1650 (4 roll stand) The SheetWizard 1650 dual rotary sheeter is engineered to accommodate a variety of application requirements. This versatile and standardized sheeter features dual rotary knife technology, providing exceptional cut quality for materials up to 1000 gsm. The machine is capable of operating at a maximum speed of 335 meters per minute (1100 feet per minute). Unwind System Four shaftless floor pickup unwinds are designed to handle rolls with a diameter of up to 73 inches. The system supports core sizes ranging from 3 inches up to 12 inches, ensuring flexibility for different roll specifications. Hjdpfx Adjy Uffbjzer Decurling and Tension Control Each unwind is equipped with overhead decurler and tension controls, maintaining optimal sheet flatness and consistent tension throughout the process. Alignment and Splice Management The machine incorporates FIFE alignment technology and a splice sensor detector, which automatically discards joined sections to ensure product integrity and continuous operation. Slitting Capabilities The SheetWizard includes a single set of three slitters, capable of cutting up to 600 grams. This arrangement allows for efficient slitting and high throughput.

Condition: used, Year of construction: 1995, Rolling curve 45° with a criminal Conveyor curves, drive Centre Make: Transnorm Type: TS 2712 Year of construction: 1995 Project A49993 POS. 665 Conveyor angle: 45° Width: 500 mm constant speed V = 0.78 m/sec Role: slide stored with conical plastic molding and metal rollers without posts Optional columns Shipping weight: 120 kg on euro pallet Transportmasze: L x B x H = 1800 x 700 x 400 mm Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik Hsdsk Aa N Aepfx Adzor

Condition: used, Year of construction: 2012, TGW curves roller conveyors 45° left Order no. 150072 Item 03.0721 year of manufacture: 2012- working width: 345 mm plastic rollers working width: 400 mm metal rollers total width: 480 mm inner radius: 1050 mm speed: 0.45 m / sec lateral guide on both sides Rollers: conical plastic molded rollers: Metal Optional: 3 supports Shipping dimensions: Lxwxh 2200 x 800 x 400 mm: 90 kg Hedpfxjk Aa Nqo Adzer Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: good (used), Brake roller, conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Conveyor belt rollers: brake roller -Diameter roll: 90 mm -Transport width: 840 mm -Shaft: Recording Ø20 mm / Ø20 x 12 mm see photos -Quantity: 29x transport rollers available -Price per piece Hedpfjq Tvqgex Adzjr -Total dimensions: Ø 90 x 870mm -Weight: 6.3kg/piece