Used Total Length: 1640 Mm / Support: 60 Mm for sale (94,344)

Condition: good (used), The scope of delivery includes: 01x Locking bracket, used Material color: sendzimir galvanized Total length: approx. 1,640 mm Leg "A" approx. 39 mm (flanged) Leg "B" approx. 63 mm Support surface: approx. 60 mm Leg "C" approx. 13 mm Material thickness: approx. 1.50 mm Weight / piece: approx. 2.330 kg Todpforfx Hzsx Ahmsc General information about the article: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery. depending on the place of delivery or scope of delivery.

Condition: used, Cut-to-length line Bronx 2050x8mm x35t (A3781) for coil metal cross cutting into sheets of required sizes with different length and width. Thickness Range: 2 – 8 mm Coil Capacity: 35t Coil OD: 2100mm Coil ID: 508mm , 610mm , 762mm Strip Width: 2000mm – 600mm Tedpfoq Ulh Hsx Ahmoc Sheet Length: 8000mm – 600mm Pack Weight: 10 t Max Line Speed: 60 meters/min Cuts Per Minute: 35 Complete Line With 4 Coil Storage Storage Ramp Coil Loading Car Double Stub Mandrel Uncoiler Sliding Base Hydraulic Expansion Drag Brake Tension Control Peeler / Hold Down Roll 3 Roll Coil Breaker Feed Up Table 7 Roll Backed Up Leveler with Pinch Roll Breaker (9 Rolls Total) Entry Power Pinch Rolls 3 Flights Top & Bottom Back-Up Rolls Entry & Exit Pinch Rolls Marking Unit Measuring Roll Pinch Rolls Bronx Flying Shear AC Die Accelerator Flywheel & Air Clutch and Brake Rack & Pinion Accelerator 35 Cuts per Minute Reject Conveyor Twin Belt Gauging Table Stacker Side Squaring Lift Stacking Tables Photo Cells Drop Type Motorized End Stop Motorized Run Out Conveyor Upgraded AC Motors Upgraded Control Techniques Digital Drives Complete Line

Condition: excellent (used), Year of construction: 2018, operating hours: 4,000 h, functionality: fully functional, Meat Recovery Unit "P-60-MM" for the separation of all kinds of red meat bones (beef, etc.) for high quality MDM meat capacity with BB-3000: up to 900-1.000 kg/h* *capacitiy is value for orientation, depending an size of bones, charging, etc. with 8mm hole filter and stainless steel piping to softseparator with computer control "ISC-E40" complete, 400 V / 3/50 Hz COUNTRY OF ORIGIN: AUSTRIA Tsdpfx Ahoyuf D Aomec Art-Nr.: 015018

Condition: defective spare-parts repository (used), Year of construction: 1990, functionality: not functional, turning length: 600 mm, turning diameter: 300 mm, travel distance X-axis: 175 mm, travel distance Z-axis: 670 mm, spindle motor power: 11 W, rotational speed (min.): 3,500 rpm, total length: 2,620 mm, total width: 1,480 mm, overall weight: 4,000 kg, bar passage: 65 mm, spindle nose: MT-NO.7, Equipment: documentation/manual, DAINICHI F25 CNC turning center, manufactured in Japan. A robust and reliable CNC lathe suitable for precision turning and general production applications. The machine features a rigid construction, hydraulic chucking, and automatic tool changing, making it suitable for both small and medium production runs. The machine is available for inspection and can be demonstrated upon request. TECHNICAL SPECIFICATIONS CNC control: FANUC CNC turning center Maximum turning diameter: approx. 300 mm Maximum turning length: approx. 600 mm Swing over bed: approx. 500 mm Spindle bore: approx. 65–77 mm* Spindle speed: up to approx. 3,000–3,500 rpm* Turret: automatic turret, 10 stations* Hydraulic chuck Hydraulic tailstock Coolant system Chip conveyor *Specifications to be confirmed according to the individual machine configuration. ADVANTAGES DAINICHI, Japanese machine construction Robust and rigid CNC turning center FANUC CNC control Hydraulic chuck and tailstock Suitable for general turning and production work Tjdpfx Ajzwdqrohmsc Machine available for inspection Immediate availability < < < THE MACHINE HAS A FAULT ON THE REGULATOR AND IT IS NOT FUNCTIONAL. IT CAN BE REPAIRED OR USED FOR SPARE PARTS. > > > IT HAS AN ALMOST NEW 3-JAW CHUCK.

Condition: used, clear span: 3,300 mm, total length: 17,100 mm, total height: 2,500 mm, load per truss pair (max.): 1,750 kg, Technical data for the pallet racking system: Racking system: Mecalux Technical data for the installation: Number of racking rows: 01 unit Length per racking row: approx. 17,100 mm Number of bays per racking row: 05 units Number of levels including the base level: 02 units Todpfxjz A A Dle Ahmoc Technical data for the capacity: Pallet spaces per bay: 12 units Pallet spaces per row: 60 units Total pallet spaces: 60 units Based on: Load support: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Overall height incl. pallet: not specified Weight per pallet (max.): 435 kg Included in the scope of delivery: 06x Pallet racking uprights, used Material color: blue Upright profile dimensions: 100 x 69 x 2.0 mm Upright type: M-101 Incl. cross and diagonal braces, Base plates The uprights are pre-assembled (bolted frame) 2,500 mm high 1,100 mm deep 20x Pallet racking beam, used Material color: RAL 2001 orange Beam type: TB-S120 Box profile: 120 x 50 mm Clear span: 3,300 mm Max. load per beam pair 1,750 kg with evenly distributed load 40x Locking pin, used Material color: Sendzimir galvanized For securing the longitudinal members against unintentional lifting 24x Bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: cracked concrete 12x Shimming plate, used Design: completely galvanized For leveling the racking uprights that are installed on uneven ground 01x Load sign with information on bay and shelf loads, manufacturer and order number Dimensions: 420 x 297 x 3 mm General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: good (used), The scope of delivery includes: 1x Depth bar, used Material color: raw Total length: approx. 1,110 mm Inner length: approx. 1,102 mm for stand depth: approx. 1,100 mm Clear span: approx. 1,000 mm Profile dimensions: K 140 x 60 x 4 mm Todpfjwl Ncfex Ahmoc Crossbeam support: approx. 52 mm Unit weight: approx. 7.10 kg Your contact persons in our company: Mr. Andre Evening Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item is subject to additional costs, which can be requested separately from us depending on the delivery location and scope of delivery.

Condition: good (used), clear span: 2,775 mm, total length: 17,350 mm, load per truss pair (max.): 1,023 kg, Technical data for the pallet racking system: Racking system: Jung Heinrich Type: Esmena Technical data for the installation: Number of racking rows: 1 Todpfx Ahsz A D Dgemec Length per racking row: approx. 17,350 mm Number of bays per racking row: 6, each 2,775 mm Number of levels including the base level: 6 Technical data for the capacity: Pallet spaces per bay: 21 Pallet spaces per racking row: 126 Total pallet spaces: 126 Based on: Load unit: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Overall height incl. pallet: not specified Weight per pallet (max.): approx. 341 kg Included in the scope of supply: 07x Pallet racking uprights, used Material color: RAL 5019 blue Frame profile: MX630 Profile dimensions: 100 x 81.3 x 1.8 mm System hole pitch: 50 / 50 mm incl. cross and diagonal bracing, Base plates The uprights are pre-assembled (bolted truss) Height: 9,000 mm Depth: 1,100 mm 72x Pallet racking beams, used Material color: orange Box profile: 85 x 40 mm Beam type: GN85x41 Connector: 5 hooks Clear width: 2,775 mm Max. load per pair of beams: 1,023 kg, with evenly distributed load. 144x Locking pins, used Material color: Sendzimir zinc-plated For securing the longitudinal members against unintentional lifting out. 28x Bolt anchors, new Manufacturer: Hilti Type: HST2 M12x105/10 Design: Carbon steel, zinc-plated Approved for: cracked concrete 14x Shims, used Design: completely zinc-plated For leveling the racking uprights that are installed on uneven ground 01x Load sign with information on bay and shelf loads, manufacturer and batch number Dimensions: 420 x 297 x 3 mm General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: good (used), Machine spindle, precision spindle, double grinder spindle, precision spindle for belt drive, belt drive spindle, grinding spindle -Manufacturer: Fortuna, grinding spindle precision spindle -Type: 60 64 110 -Dimensions: see photos Tedpfxowv I T Rs Ahmoc -Total dimensions: Ø 60 x 455 mm -Weight: 6.7 kg

Condition: ready for operation (used), Year of construction: 2015, operating hours: 29,446 h, clamping force: 2,600 kN, screw diameter: 60 mm, overall weight: 22,300 kg, controller manufacturer: ENGEL, controller model: CC300, product length (max.): 8,780 mm, Electrical injection moulding machine manufactured in 2015. This Engel e-victory 1640/260 features a clamping force of 2600 kN and an injection unit of 1640. It includes a tiebarless clamping system and a servo-electric injection system for high efficiency. If you are looking to get high-quality injection moulding capabilities, consider the Engel e-victory 1640/260 machine we have for sale. Contact us for further details. Tsdpez Dgrpsfx Ahmsc • Clamping system: Tiebarless ENGEL clamping system • Injection unit: 1640 • Injection system: Servo-electric, high execution • L/D ratio: 24 • Control unit: ENGEL CC300 (21.5" Full HD touchscreen) • Hydraulics: ECODRIVE SHV1 (1 demand-regulated servo pump) • Electrical connection: 3 x 400 V + N + PE, 50 Hz • Nominal connected load: approx. 164 kW • Centering: 160 mm • Hydraulic core pulls: 2 on moving platen, 2 on stationary platen • Vacuum/compressed air circuits: 8 on stationary platen with Venturi nozzles and pressure switches • Pneumatic mold valve control: 2-fold FESTO, up to 16 bar • Mold heating: 16 control zones, max heating power 25 kW • Nozzle radius: 15 mm • Nozzle bore: 4 mm • Nozzle contact stroke: approx. 405 mm • Hydraulic tank capacity: Main tank approx. 490 l, suction tank approx. 220 l • Robot interface: Euromap 67 / AN-146 • Languages: Czech and German Additional equipment • MuCell package: • Complete MuCell Basic Package • PM cold-work steel screw Ø 60 mm • Hydraulic needle shut-off nozzle • Melt pressure sensor • Trexel auxiliary equipment: SII VC 30, MIK 1060 SII • Frame for two 50 L gas cylinders • Mold temperature control: 3 ENGEL flomo distributors (24 monitored circuits total) • GEKU automation with conveyor belts

Condition: used, Parallel Lathe MULLER & PESANT Between points: 2500 mm Maxi Ø on bench: 520 mm Maxi Ø over saddle: 280 mm Maxi diameter in brocken bed: 700 mm Spindle diameter: Ø 56 mm Spindle speed: from 12,5 to 1000 RPM TRIPAN Turret 3-jaws chuck Ø 250 mm Tailstock CM4 Auto feeds longitudinal + transversal Lubricant pump Voltage: 380 V Dimensions (L x W x H): 4000 x 1500 x 1600 mm Weight: approx 3,5 T Tedpfxjzwgpqo Ahmjc

Condition: good (used), Year of construction: 1968, functionality: fully functional, Robust Altendorf F90 panel saw in a heavy-duty, solid design. The machine features a large sliding table with a cutting length of approximately 2,600 mm, a parallel fence, and a crosscut/miter fence. A cutting width of approximately 1,250 mm is available to the right of the saw blade. A classic, robust Altendorf machine for use in carpentry workshops and woodworking businesses. Tsdpfx Ahez D Uqtomjc Technical specifications Manufacturer: Altendorf Machine type: Panel saw Year of manufacture: 1968 Cutting length: approx. 2,600 mm Cutting width to the right of the saw blade: approx. 1,250 mm Motor power: 5.5 hp / approx. 4.0 kW Voltage: 380 V Equipment Large sliding table Parallel fence Crosscut/miter fence Saw blade guard Manual adjustments Heavy-duty, solid design The machine is in used condition, commensurate with its age. Transport is possible for an additional charge! Note The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale, and changes are subject to change. All information is without guarantee.

Condition: used, clear span: 3,595 mm, total length: 18,575 mm, load per truss pair (max.): 2,650 kg, Technical data for the pallet racking system: Racking system: Mecalux Technical data for installation: Number of racking bays: 01 unit Length per racking bay: approx. 18,575 mm Number of bays per racking bay: 05 units Number of levels including floor level: 02 units Technical data for volume: Pallet spaces per bay: 12 units Pallet spaces per row: 60 units Total pallet spaces: 60 units Tjdpfx Ahez A A Auomoc Based on: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Overall height including pallet: not specified Weight per pallet (max.): 660 kg Included in the scope of supply: 06x Pallet racking uprights, used Material color: blue Upright profile dimensions: 100 x 69 x 2.0 mm Upright type: M-101 Including cross and diagonal braces, Base plates The uprights are pre-assembled (bolted framework) 2,500 mm high 1,100 mm deep 20x Pallet racking beams, used Material color: RAL 2001 orange Beam type: 2C-S 1315 Box profile: 130 x 50 mm Clear width: 3,595 mm Maximum load per beam pair: 2,650 kg with evenly distributed load 40x Locking pin, used Material color: Sendzimir galvanized For securing the longitudinal beams against unintentional lifting out 24x Bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: cracked concrete 12x Shimming plate, used Design: fully galvanized For leveling the racking uprights that are installed on uneven ground 01x Load sign With information on bay and frame loads, manufacturer and order number Dimensions: 420 x 297 x 3 mm General information about the item: This item is offered for collection only. Any additional transport or shipment of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: used, clear span: 3,595 mm, total length: 18,575 mm, total height: 9,500 mm, load per truss pair (max.): 2,650 kg, Technical data for the pallet racking system: Racking system: Mecalux Technical data for the installation: Number of racking rows: 1 Length per racking row: approx. 18,575 mm Number of bays per racking row: 05, each 3,595 mm Number of levels including floor level: 04 Technical data for the volume: Pallet spaces per bay: 20 Pallet spaces per racking row: 100 Total pallet spaces: 100 Based on: Load handling unit: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height including pallet: not specified Weight per pallet (max.): 660 kg Included in the scope of delivery: 06x Pallet racking uprights, used Material color: blue Upright profile dimensions: 100 x 69 x 2.0 mm Upright type: M-101-P Including cross and diagonal braces Base plates The uprights are pre-assembled (bolted frame) 9,500 mm high 1,100 mm deep 40x Pallet racking beam, used Beam type: 2C-S 1315 Material color: orange Tsdpfx Ahoz A Awxemjc Box profile: 130 x 50 mm Connector: 4 hooks Clear span: 3,595 mm Max. load per beam pair: 2,650 kg, with evenly distributed load 80x Integrated safety pin, used To secure the longitudinal beams against unintentional lifting out 24x Bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: cracked concrete 12x Shimming plate, used Design: fully galvanized to level the racking uprights that are installed on uneven ground 01x Load sign with information on bay and shelf loads, manufacturer and batch number Dimensions: 420 x 297 x 3 mm General information about the item: This item is offered for collection only. Any additional transport or shipment of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, total length: 1,010 mm, total width: 1,010 mm, total height: 2,010 mm, mesh size: 10 mm, Equipment: CE marking, Own production smoke trolleys, Lithuania currently offers 4 complete sets of drying trolleys with trays available from stock. Were used as a demonstration model in the showroom. Can be sent one set at a time. New price 3500 EUR per set Full manufacturer warranty is provided by HySpriz. This is an ideal trolley solution for drying products such as jerky, kabanos, fish snacks, and pet sticks. It is also suitable for fish defrosting processes and even baking applications. The mesh structure ensures excellent air convection through all product levels, resulting in uniform drying and stable product quality. We manufacture in Ukraine a heavy-duty stainless steel drying trolley, specifically designed for industrial and semi-industrial production of meat and fish snacks, raw-cured sausages, jerky, and pet treats. The trolley is fully compatible with RK50U, SAS200, and FARS200 systems and is ideal for use in drying chambers, smokehouses, and climate-controlled environments with air dehumidification. The external dimensions of the trolley are 2000 × 1010 × 1010 mm. The frame is made of corrosion-resistant AISI 304 stainless steel using a robust 40 × 40 × 1.3 mm profile. It includes 30 levels with a 55 mm spacing between tiers and special locking systems to prevent trays from falling during movement. For mobility, the trolley is equipped with six heavy-duty pendulum swivel casters (Ø125 mm), allowing full rotation even when loaded. Each trolley includes 60 stainless steel trays sized 900 × 500 mm. The trays are made of corrugated stainless steel mesh, 5x5 mm. can be optionally equipped with Teflon liners (5,8 EUR/pcs) Wire thickness is 0.7 mm for high rigidity. Each tray has a 15 mm perimeter rim for improved airflow and heat distribution. Reusable non-stick Teflon inserts are included, ideal for sticky or soft products. Total load capacity is up to 400 kg per trolley, with up to 7 kg per tray. The system supports both low-temperature dehydration and high-temperature processing. Compatible with chambers using horizontal or vertical airflow. Designed for easy cleaning, hygiene, and long service life. Tedpfx Aerftxfohmjc This trolley ensures efficient moisture removal and uniform air distribution, which directly improves drying performance and final product shelf life.

Condition: used, Spindle centering tool Manufacturer: Kelch Diameter of centering bore: 60 mm Steel cross-section: 34 mm x 34 mm Tedpfx Aocp Azxohmoc Diameter of bolt circle for fixing bore: 102.5 mm Length: 450 mm Width: 135 mm Height: 105 mm

Condition: used, Bending tool, die, upper knife, upper tool -Tool: for press brake, 11 pieces -Tool: 60° -Dimensions: 95 x 36 mm -Dimensions: see the drawing in the photos Tsdpehr Exuofx Ahmec -Total length: 7780mm -Lengths: 8x 835 / 2x 600 / 1x 500 mm -Transport dimension: 835/400/324 mm -Weight: 182 kg

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, For sale is a robust Lazzari Juno 320 panel saw in a heavy-duty industrial design. This machine is ideally suited for professional use in carpentry, joinery, and interior design. Thanks to the easy-to-use sliding table, the generously sized machine table, and the 45° swivel function of the saw blade, the machine enables precise longitudinal, cross, and miter cuts. Technical data: Manufacturer: Lazzari Type: Juno 320 Year of manufacture: 2001 Main motor: 5.5 kW Voltage: 400 volts Tjdjzn N Ukopfx Ahmec Speed: 3,200 / 5,000 rpm Cutting length / table length: 3,200 mm Table width to the right of the saw blade: 1,250 mm Machine weight: approx. 750 kg CE version Equipment: Sliding table 3,200 mm Saw blade, 45° tiltable Mechanical height and swivel adjustment Parallel fence with fine adjustment Angle/miter fence with scale Generously sized machine table Robust aluminum guide Control panel with emergency stop Speed control 3,200 / 5,000 rpm Heavy-duty industrial design Precise guide systems Dust extraction connections Ideally suited for: Solid wood processing Panel cutting Furniture making Interior design Carpentry and joinery workshops Series and individual production The machine is in good, used condition with the usual age-related signs of wear. It impresses with its stable design, high cutting precision, and reliable industrial drive. Inspection and a test run are possible at any time by appointment. Transport is possible for an additional charge! The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale, and changes are subject to change. All information without guarantee.

Condition: used, clear span: 2,700 mm, total length: 14,100 mm, load per truss pair (max.): 3,000 kg, Technical data for the pallet racking system: Racking system: Mecalux Technical data for installation: Number of racking rows: 01 unit Length per racking row: approx. 14,100 mm Number of bays / racking row: 05 units, each 2,700 mm Number of levels including base level: 02 units Technical data for capacity: Pallet spaces per bay: 09 units Pallet spaces per racking row: 45 units Total pallet spaces: 45 units Based on: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Overall height incl. pallet: n/a Weight per pallet (max.): 1,000 kg Included in the scope of supply: 06x used pallet racking uprights Material color: blue Upright type: A103 Upright profile: 100 x 79 x 3.00 mm Incl. cross and diagonal bracing, Base plates The uprights are pre-assembled (bolted frame structure) 2,300 mm high 1,100 mm deep 20x new pallet racking beams Material color: RAL 2001 orange Box profile: 110 x 50 mm Beam type: 2C-S 1115 Clear width: 2,700 mm Agraffe: G.E. - 3 Max. load per beam pair: 3,000 kg, with evenly distributed load Tsdpfx Ahsz A Ayasmjc 40x integrated safety pin, new Material color: orange For securing the longitudinal beams against unintentional lifting 24x heavy-duty dowels, new Manufacturer: MKT Design: galvanized steel Approved for: uncracked concrete Through-installation: M 12-13/95 12x leveling plates, used Design: fully galvanized For leveling the racking uprights that are installed on uneven ground 01x load signs With information on bay and shelf loads, manufacturer and batch number Dimensions: 297 x 210 x 2 mm Note: The images are example images to illustrate the material. The quantities shown may differ from the scope of supply. General information about the item: This item is only offered for collection. Any additional desired transport or shipment of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of supply.

Condition: used, Year of construction: 1982, Used cut-to-length line FIMI 1250×0.12-0.8mm x16t with two packing stations (A3793) is coil metal processing line to cut metal into sheets with required sizes. Such machine can be good solution for metal coil processing companies. Todpfxottlfko Ahmoc Manufacturer : FIMI – Italy Year of manufacture : 1982 Revamping : 2008 (SEI SISTEMI) and 2019 (SEI SISTEMI) Ce marking : 2019 Material before processing : Max coil width 1250 x 0.12 Г· 0.80 mm. Uncoiler capacity : 16 Tons. Sheets dimensions : min. 300 x 500 mm. – Max 1250 x 2000 mm. Working speed 0-120 m/min. LIST OF MACHINES COMPOSING THE LINE ➢ STOCKING RAMP FOR 2 COILS ➢ COIL LIFT ON UNCOILER ➢ UNCOILER WITH SECTORS DIAM. 400 AND DIAM. 508 MM. ➢ PINCH-ROLL FOR STRIP FEEDING TO LEVELER ➢ 6HI-LEVELLER WITH INTERCHANGEABLE ROLL BENCHES – 1 BENCH FOR THICKNESS 0.12 ÷ 0.50 MM. – 1 BENCH FOR THICKNESS 0.50 ÷ 0.80 ➢ CONNECTION TABLE BETWEEN LEVELER AND PINCH-ROLL ➢ PINCH-ROLL ➢ DESCENT ROLLWAY IN LOOPING PIT ➢ ASCENT ROLLWAY FROM LOOPING PIT ➢ PINCH-ROLL WITH MOTORIZED ROLLS ➢ STRIP CENTERING DEVICE WITH VERTICAL ROLLS ➢ THICKNESS MEASURER TYPE ELECTRONIC KEYBOARD ➢ ROTATING SHEAR ➢ SWIVELLING CONVEYOR TO AVOID SCRAPS AND PARTS OF DEFECTIVE STRIP ➢ COLLECTION BOX FOR TRIMMING AND DEFECTIVE PARTS OF THE STRIPS ➢ SWIVELLING CONVEYOR TO AVOID SCRAPS AND PARTS OF DEFECTIVE STRIP IN THE FIRST AND SECOND COLLECTION BOXES AND STACK COMPOSITION ➢ CONNECTION ROLLWAY AND SECTION FOR CONVEYING OF SHEETS IN THE THIRD BOX. ➢ 3 STACK UNLOADING SHUTTLES TO CONVEY STACKS TOWARDS THE ROLLWAY ➢ 1 EVACUATION ROLLWAY FOR THE PACKAGING ➢ HYDRAULIC EQUIPMENT FOR ALL THE LINE ➢ INTRODUCTION STRIP OPERATION PULPIT LOCATED AT LINE ENTRY FOR COILS CUTTING ➢ MAIN PULPIT FOR ALL LINE OPERATIONS ➢ OPERATION PULPIT LOCATED AT LINE EXIT ➢ ELECTRICAL CABINET CONTAINING ALL ELECTRICAL/ELECTRONIC COMPONENTS AND PLC ➢ PHOTOCELLS AND SAFETY/PROTECTION BARRIERS.

Year of construction: 2010, condition: like new (used), We are selling: TOTAL WALTHER spray deluge system / sprinkler container Tedpsgnguvofx Ahmec with 13 extinguishing groups, year of manufacture 2010, used for a short period only, in new condition. The system is still completely installed (including piping). The spray deluge system automatically monitors its operational readiness. Monitoring center, manufacturer: TOTAL WALTHER; type: MZ382100; approval number: G4860030. Number of monitoring contacts: 41 Fully functional On-site inspection possible at any time Offered price in 2010: €161,422.00 Additional documents (technical data sheets, operating instructions, etc.) can be requested if needed.

Condition: good (used), functionality: fully functional, pipe diameter (max.): 60 mm, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, hardened rollers, Max capacity flat bar: 60 × 12 mm Max capacity tube: ø 60,3 × 3,2 mm Max capacity angle: 60 × 60 × 3 mm Shaft diameter: ø 50 mm Shaft length: 115 mm Driven rolls: 3 Top roll diameter: ø 175 mm Bottom rolls diameter: ø 115 mm Height adjustment upper roll: 85 mm Shaft speed: 8–16 min-1 Control: HV control with digital readout Featured with: - Tubeset for ø50 mm - Machine user manuals Tsdjz H Sfmopfx Ahmoc Country of origin: Italy Motor power: 4 kW Machine (L×W×H): 125 × 77 × 140 cm Machine weight: 490 kg

Condition: good (used), Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipper, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 1800 mm -Cross-section: 200 x 60 mm -Recording: see photos -Transport dimensions: 2060/1080/H200 mm Tedpfswn D Eysx Ahmjc -Total weight: 487 kg

Condition: good (used), Deburring machine, pipe deburrer, bore deburrer, deburring device, brush deburring machine, wire brush -Manufacturer: Keil, Keil-Single deburring machine with base -Drive: 3.0/2.0 kW / 3000/1500 rpm -Brush: Ø 200 mm, Ø 200-250-300 mm possible -Brush width: 60 mm, 20-40-60-80-100 possible Tedpfjrw Daasx Ahmec -Dimensions: 800/800/H1210 mm -Weight: 110 kg

Condition: good (used), The scope of delivery includes: 1x deep shelf support, used Shelf system: SSI Schäfer Material color: blue Overall length: approx. 1,060 mm For upright depth: approx. 1,050 mm Clear span: approx. 928 mm Profile dimensions: U 50 x 50 mm Crossbar support: approx. 65 mm Material thickness: approx. 3 mm Unit weight: approx. 3.53 kg The deep shelf support can be used with the following crossbar profiles: INP: 80 x 42 mm IPE: 80 x 46 mm INP: 100 x 50 mm IPE: 100 x 55 mm INP: 120 x 60 mm Box profile widths: Todpjlq Ewwjfx Ahmoc - 40 mm - 50 mm - 60 mm General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur extra costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: good (used), Bending tool, die, upper blade, upper tool, deer foot tool, deer foot tool for press brake -Tool for: Press brake -divided -Tool: 82° -Dimensions: 170 x 60 mm Todpfxjc R S Hae Ahmjc -Total length: 2540 mm -Lengths: 20/40/80/160/320/640/1280 mm -Weight: 88 kg