Used Transfer Type Powder Coating Lines for sale (42,082)

Condition: new, Year of construction: 2025, functionality: fully functional, TRANSFER TYPE POWDER COATING LINES The transfer type conveyor consists of a combination of conveyor rails. The effective powder coating system layout is designed by our project department according to your workshop dimensions based on the products to be coated and daily quantities. Workpieces are loaded onto the bars which are moved manually or automatically to bring the products to the needed, booth or oven. The advantage of this system is that the products are loaded on the conveyor and do not tire the operator as they move on the conveyor until the end of the process, so it is an efficient system. The movement of the bars can be automated at any point in the system, making the entire conveyor line a cost-effective alternative to power&free conveyors. In the painting system, automatic coating can be achieved by adding a conveyor system above the powder or paint booth and adding a reciprocator and automatic gun to the coating booth. Godpfxjvv H Uus Alxjit We offer the best technical solutions and competitive prices * Office in France and Germany, Contact us for more information and quotations

Condition: used, EKOMAL powder painting line Maximal dimension 1200 x 700 x 100, floor dimension 1800 x 1200 List of equipment: Gsdpfx Aleiqgkcoxsit 1. three-speed spray washer with exhaust fan electrically heated. First zone of the line: - Detail washing, tub capacity of about 2 thousand liters. Electric heating. In addition, reheating was installed from the plant co. Second zone pre-rinse bath capacity of about 1 thousand liters. Gas dryer after washing with air curtains and heater. Second zone of the line - drying of the detail, heating medium propane technical or propane-butane. Riello gas burner Third zone of the line-powder booth with manipulators adapted for automatic spraying, detachable blotting paper filter blocks Third zone - painting of the workpiece, booth equipped with two manipulators and a station for manual painting. ESB control cabinet. 4th gas furnace Fourth zone - firing, gas furnace with two heaters on the upper level, siphoned. 5. continuous motion overhead conveyor with tensioning and driving station Fifth zone -Suspended conveyor with loading and unloading zone. The length of the transport chain is 112 mb. In addition, it is equipped with crossheads to facilitate loading. 112 pcs. Maximum travel speed 1m/min, adjustable from 0.3 m/min. Includes chain, drive, chain tensioning unit, control. Allows reverse gear, length 77m

Condition: new, Year of construction: 2026, Some components can be choose: - chamber pretreatement with osmosis plant, Gedpfx Aljizw Hnsxoit - Water drier oven, - Powder curing oven, - manual transportsystem inkl. steel frame, - Controler siemens, Additionsal chooseable components possible.

Year of construction: 2013, condition: used, functionality: fully functional, machine/vehicle number: GE-KEK-100L, Complete powder coating system for sale, including chemical pretreatment cabin, powder coating booth, and curing oven. The system is fully operational, well-maintained, and immediately available. Ideal for metal fabrication workshops, small industrial producers, or powder coating subcontractors. The equipment complies with EU industrial standards and features comprehensive electrical control systems. Included equipment: 1️⃣ Chemical Pretreatment Cabin Manual chemical pretreatment spray unit for surface preparation before powder coating. - Cabin dimensions: 1600 × 1600 × 2200 mm - Chemical tank capacity: approx. 800 L - Pump / spray unit: ST84 HE - Heating elements: 2 × 6 kW - Water temperature: 45–60°C - Motor power: approx. 1.5 kW - Electrical connection: 3×380/220 V - Closed circulation system - Chemical-resistant design 2️⃣ Industrial Powder Coating Booth - External dimensions: 1850 × 1600 × 2600 mm - Airflow: 3,000 m³/h - Motor: approx. 1.5 kW - Filter cartridges: 2 pcs with automatic cleaning - Airflow speed: 0.2–0.5 m/s - Maximum suspension size: 250 × 1000 mm - Spray opening: 1100 × 1100 mm Included equipment: - Extraction ventilation with silencer Gsdeygg Rnjpfx Alxjit - Compressed air treatment unit - Automatic filter cleaning system - Powder recycling tank - EU-standard control cabinet - Condition: good technical condition, regularly serviced 3️⃣ Industrial Walk-in Powder Curing Oven - Internal dimensions: 1300 × 1300 × 2200 mm - Working temperature: 180–200°C - Typical curing time: 15–25 minutes - Heating capacity: 2 × 12 kW (electric) - Circulated air: 1,250 m³/h - Exhaust air: 100 m³/h - Motor power: approx. 1.5 kW - Insulation thickness: 150 mm - Year of manufacture: 2013 Included equipment: - Insulated chamber with door - Circulation fan system - Heating elements - Overheat protection - Airflow sensor - EU control cabinet - Steel base frame Condition: Excellent working order, complete documentation available General information - System type: Powder coating line - Condition: Very good - Year: 2013 - Documentation: Available - Operational status: Fully functional - Availability: Immediately available Price 💰 19,900 EUR (complete system) Location Hungary – EU Ideal for: - Metal fabrication workshops - Small powder coating facilities - Industrial maintenance workshops - Subcontract coating services

Condition: good (used), Year of construction: 2013, Central control WAGNER automatic powder spraying booth (pre-treated parts), incl. WAGNER SuperCenter powder supply unit (2013) Manual powder spraying system (small series, mixed colors) with guns Cyclone separator Block gas-heated water drying furnace. drying and baking furnace (incl boiler) Gsdpjyhbdfofx Alxeit The powder-coated workpieces are fired in a natural gas-heated powder firing furnace Cooling after water drying Cooling after powder firing Handling system Automatic wastewater treatment capacity: max.: ~ 1 m³/h

Condition: new, Year of construction: 2026, machine/vehicle number: A1481630, Complete finishing line max. product dim. lenth = 2000mm, width = 750mm, hight = 1000mm max. weight 50kg (higher weight possible) speed up tp max. 1m/min. (higher speed possible) Gjdpobqh R Tjfx Alxjit Please contact us for more information.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, total length: 43,000 mm, total height: 3,800 mm, total width: 20,000 mm, type of input current: three-phase, workpiece weight (max.): 200 kg, compressed air connection: 9 bar, workpiece height (max.): 2,400 mm, workpiece length (max.): 7,200 mm, We are offering this BEWAP MACRO 6 POWDER COATING MACHINE – Complete Powder Coating Line 7.2 m, year of manufacture 2015, in very good condition. Complete setup for surface treatment, including 2 powder coating booths and 2 curing ovens for powder coating applications. Machine in perfect working order. Year 2015. Surface Treatment Booth (made of 316 L stainless steel, membrane spray pumps, dosing pumps, stainless steel pickling tanks with immersion heaters, rinse tanks, effluent tank, dosing pumps, reverse osmosis unit, water softener) Drying oven (gas burner, control cabinet) 2 manual powder coating booths with automatic feed and extraction Curing oven (gas burner, control cabinet) Structure with manual overhead conveyor: 3 transfer trolleys with 3 lifting beams (200 kg per beam) 2 lift stations for loading and unloading parts 36 lifting beams in total Operation with 3 beams simultaneously Compatible with Qualicoat and Qualilaquage certification Maximum part dimensions per lifting beam: Godpfx Aleyc S Htoxoit Maximum part length: 7200 mm Maximum part height: 2400 mm Maximum part width: 500 mm (configuration for 1000 mm width possible) The line is to be dismantled and removed on site Price: €150,000 (excl. VAT) If you have any questions or need further information, please do not hesitate to send us a message or call us. Viewing is possible.

Condition: like new (used), Year of construction: 2023, operating hours: 800 h, functionality: fully functional, total length: 1,400 mm, total height: 2,300 mm, total width: 250 mm, workpiece weight (max.): 72 kg, For sale: Nearly new automatic powder coating line, installed in 2023, with approximately 800 operating hours. Current layout footprint: approx. 12 x 28 m, H 5 m. Price and dismantling timeline subject to individual agreements. Layout modifications available: pre-treatment tunnels can be added, and the curing oven can be reconfigured as a straight-through tunnel suitable for parts exceeding 6 meters in length. We can provide a complete quotation including dismantling and international relocation upon separate arrangement. Excellent opportunity to acquire an almost-new line at a lower price and with much shorter lead times compared to a new installation. Monorail conveyor: - Speed: 0.9 – 3.3 m/min - Automatic lubrication - Automatic chain tensioning unit - Chain pitch: 270 mm - Total length: 131 m - Total load capacity: 9500 kg - Steel supports between the floor and conveyor Gjdsx H Tadepfx Alxeit Automatic powder coating booth Gema: - PVC booth: MagicCompact EquiFlow BA04 - MagicControl 4.0 control panel - Photo-cell frame for automatic gun control - 16 x OptiGun GA03-P automatic guns - 1 x OptiSelect GM04 manual gun - 17 x OptiSpray AP01.1 powder feed pumps - OptiCenter OC07 powder feeding system - Ultrasonic sieve US07 for OptiCenter - 2 x ZA07-23 reciprocators with X-axis automatic control - MonoCyclone EZ05-16, 16,000 m³/h - Powder filter: 16,000 m³/h, 30 kW - Big-Bag system for waste powder collection - CO₂ explosion protection system - Manual spray wall / trolley unit shown in pictures NOT INCLUDED Powder curing oven: - Hybrid heating (electricity or gas) — offers unique flexibility to choose the most economical energy source - Installed capacity: 300 kW - Max. temperature: 220°C - Siemens PLC control panel

Condition: new, Year of construction: 2025, SAPI Powder Coating The perfect layer for lasting protection. Powder coating is a highly effective and widely used method for applying a protective and decorative finish to various types of surfaces. It is a dry finishing process in which a fine powder composed of resin, pigments, and additives is applied to a substrate. The powder is electrostatically charged so that it adheres evenly to the surface, forming a uniform coating. To achieve optimal adhesion and durability, the substrate is first thoroughly cleaned and prepared. Oils, dirt, and other contaminants are removed to ensure a clean surface. This is crucial for the powder to bond effectively to the substrate and achieve a strong and long-lasting coating. A powder coating system typically consists of various components and equipment required for the application and curing of powder coatings. SAPI_Powder_spray_gun Spray Booth and Spray Area The booth provides a clean environment for the application process and ensures even powder distribution. Gedpfswf Dpgox Alxoit Powder Coating Gun A powder coating gun is used to apply the powder coating to the workpiece. Powder Feed System The powder feed system consists of a hopper or container in which the powder coating material is stored. It typically includes equipment such as powder pumps, feed hoses, and powder screens to transport the powder from storage to the spray gun. Pretreatment Equipment Pretreatment equipment is used to prepare the substrate before the powder coating is applied. This may include processes such as cleaning, degreasing, rinsing, and surface treatment to ensure good adhesion and durability of the coating. Curing Oven A curing oven is an essential component of a powder coating system. It is used to heat the coated substrate to the correct temperature so that the powder coating can melt, flow, and cure into a durable finish. The oven typically consists of a conveyor system or racks to transport the coated parts through the oven chamber. Exhaust system An exhaust system will be installed in the facility to extract excess powder, fumes, or volatile compounds generated during the coating process. This system helps maintain a clean and safe working environment for personnel and prevents the accumulation of powder particles in the air.

Condition: new, Year of construction: 2025, POWDER COATING SYSTEM FOR CAR WHEELS AND RIMS Oven contains 4 pieces of 22’ wheel rims in 1 batch COMPONENTS OF THE PLANT: * 1.5x1x1.3m POLYMERIZATION OVEN, 18KW ELECTRICAL * VFK-2 ONE-SIDED POWDER COATING CABINET * OVERHEAD CONVEYOR AND LOAD TROLLEYS Delivery: 6-8 weeks EXW Istanbul factory Assembly and training included We offer the best technical solutions and competitive prices Contact us for more information and quotations Gijdpfovv Rfdex Alxjt

Condition: new, Year of construction: 2025, HORIZONTAL POWDER COATING LINE FOR ALUMINUM PROFILES We are adding value to your production. * Conveyor speed up to your capacity per day Aerial conveyor - monorail or power&free type Automatized powder coating booth, metal or PVC antistatic structure Reciprocated automatic powder coating equipment system Tunnel type polymerization oven - gas, diesel or electrical heating source Made in Türkiye CE Mark We offer the best technical solutions and competitive prices Gijdpfevv Nh Rex Alxjt * Office in France and Germany, Contact us for more information and quotations

Condition: new, Year of construction: 2025, MANUAL POWDER COATING PLANTS AND SYSTEMS Our design department will give you the best customized powder coating line solution which meets your product capacity demands. Made in Türkiye CE Mark We offer the best technical solutions and competitive prices * Office in France and Germany, Gsdpevv Nuqofx Alxsit Contact us for more information and quotations

Condition: excellent (used), Installed new in 2022, this conveyor was taking product from a low level multihead weigher up to a vertical form fill seal machine in a room where the height was restricted. As new condition. Gjdpfx Asrq Eawslxoit

Condition: used, all stainless steel dimensions: ± 5.000 x 2.200 x 2.700 mm drum diameter: 1.300 mm net drum length 4.200 mm adjustable inclination angle easy to clean inlet height: ± 1.700 mm (adjustable if necessary) discharge height: ± 1.000 mm Gsdpfxjy Nax Es Alxeit power 3kW 400V, 50Hz 4 spray pipes Provided for extraction

Condition: new, Year of construction: 2026, functionality: fully functional, total height: 2,593 mm, total width: 2,700 mm, type of input current: three-phase, warranty duration: 24 months, power: 6 kW (8.16 HP), input voltage: 400 V, compressed air connection: 6 bar, volume flow: 15,000 m³/h, filter area: 45 m², sheet thickness steel (max.): 2 mm, High Efficiency Powder Coating Spray Booth "HELSINKI"/ Powder Recovery Booth / Powder Coating Extraction Unit FREE DELIVERY IN EUROPE Industrial powder coating spray booth with high-efficiency powder recovery system, German IE5 fan technology, automatic pulse jet filter cleaning, and variable airflow control. Designed for professional powder coating operations requiring reliable airflow performance, efficient powder recovery, low maintenance, and robust industrial construction. Technical Data Power: 6 kW Electrical supply: 3-phase, 380–400 V, 50 Hz Compressed air requirement: 5–6 bar clean compressed air supply Airflow capacity: up to 15,000 m³/h (variable flow control) Fan: German-made high-efficiency IE5 fan with aluminium impeller Filter system: 3 x antistatic polyester cartridge filters Filter media: 260 g/m² polyester with Teflon + aluminium coating Construction: 2 mm steel, powder coated Mobility: industrial lockable wheels Compressed air connection ports: yes Automatic filter cleaning: yes (pulse jet) Additional outlet safety filtration: yes Accessories holder / hose rack: yes Giodpfoy N Ubzox Alxot Key Features High-efficiency powder recovery Automatic pulse jet cartridge cleaning Special multiport cleaning nozzles for improved filter cleaning performance Antistatic filter media prevents powder particle embedding Reduces static charge accumulation Easier cleaning and longer filter service life Variable airflow control for different production requirements Energy-efficient German IE5 fan technology Additional outlet filtration for safer operation Compressed air ports for cleaning gun and accessories Heavy-duty industrial construction Mobile design for flexible workshop layout Dimensions Width: 2700 mm Depth: 1608 mm Height: 2593 mm Suitable for Powder coating workshops Metal fabrication Steel structures Aluminium parts coating Industrial finishing lines Custom coating production Manufacturer: Brigas Industries OY Location: Finland Condition: New DISTRIBUTORS WANTED

Condition: new, functionality: fully functional, Year of construction: 2026, Detailed Specification: - Internal dimensions: 5500 × 1500 × 2300 mm (L × W × H) - External dimensions: 5700 × 1900 × 2700 mm (L × W × H) - Entrance doors: Double-wing, 1700 × 2300 mm (W × H) - Wall panels: Thickness 100 mm, width 950 mm, tongue-and-groove structure; steel sheet 0.5 mm with mineral wool insulation inside - Box: Panels 100 mm thick, filled with mineral wool - Heating system: RIELLO oil burner model 40G20; heating capacity 200,000 Kcal/h; heat exchanger made of 2 mm stainless steel - Maximum heating output: 200,000 Kcal/h, total 1 set - Roof: Panels 100 mm thick with mineral wool insulation inside Gedsxna U Uopfx Alxjit - Control system: Heating control, time setting, fault indicator, emergency stop, hour counter, temperature limit regulator, total operating hours display - Total power: 6 kW - Overhead conveyor system: 4 tracks; maximum load 400 kg each We can manufacture ovens of any required dimensions. We provide complete systems including transport traverses, spray walls, and powder coating guns — as shown in the photos.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, Automatic Wagner powder coating plant, year of manufacture 2012 - Wagner SuperCube booth - Wagner SuperCenter powder supply system - PBS filter and cyclone 18,000 m³/h - STS CO2 extinguishing system - Pre- and post-coating stations with scissor lift platforms - Clearance dimensions (H): 2500 mm, (W): 1000 mm - 12 automatic guns + manual powder coating units Gijdpfxoy Icfxj Alxst Disassembly by arrangement at our facility in Bad Laer! Price upon request

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 2,000 mm, total width: 2,100 mm, power: 3 kW (4.08 HP), compressed air connection: 6.5 bar, volume flow: 6 m³/h, Open spray stand 2x2.1x2.2 The overspray during powdering is collected via the suction unit. The powder spray stand is supplied on castors and is therefore mobile. - The suction unit is equipped with a 60 l powder container (rollbar). - There are 4 filters in the extraction unit as the 1st stage. - The absolute filter is located above the booth. Giodpefhv Tqefx Alxst 1 Dimensions of the powder stand Width 2,000 mm Depth 2,100 mm Height 2,200 mm 2 fans 1 pc. 6,000 m³/h Electric motor 3.0 kW 3 Filter Ø 325x600 4 pcs. type filter cartridges 4 Electromagnetic valves 2 pcs. 1" "Turbo" Italy 5 Absolute filter 1 pc. type pocket filter

Condition: new, Year of construction: 2026, functionality: fully functional, insulation material: Mineralwolle 75 kg/m³, insulation thickness: 150 mm, 1. powder coating booth, open spray booth The overspray during powder coating is collected by the suction unit. The powder spray booth is supplied on castors and is therefore mobile. - The extraction unit is equipped with a 60 l powder container (rollbar). - There are 4 filters in the extraction unit as the 1st stage. - The absolute filter is located above the booth. 1 Dimensions of the powder level Width 2,450 mm Depth 2,350 mm Height 2,700 mm 2 fans 1 pc. 6,000 m³/h Electric motor 3.0 kW 3 Filter Ø 325x800 [mm] 4 pcs. type filter cartridges 4 Electromagnetic valves 2 pcs. 1" "Turbo" Italy 5 Absolute filter 1 pc. type pocket filter Gjdjffwfxopfx Alxjit 2. powder combustion furnace 1 Internal dimension length 4,000 mm 2 Inner dimension width 1,500 mm 3 Internal height 2,200 mm 4 External dimension incl. thermoblock length 5,250 mm 5 External dimension incl. thermoblock width 2,050 mm 6 External dimension incl. thermoblock height 2,530/2,750 mm 3. switch cabinet 4 Manual conveyor system The "Mantion system" conveyor technology is designed for max. 250 kg per product carrier and 750 kg/ trolley.

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 30,000 mm, total height: 4,300 mm, total width: 6,500 mm, workpiece weight (max.): 100 kg, temperature: 220 °C, heating capacity: 80 kW (108.77 HP), workpiece height (max.): 1,200 mm, workpiece length (max.): 2,500 mm, insulation material: Mineralwolle 75 kg/m³, insulation thickness: 150 mm, workpiece width (max.): 800 mm, The continuous system consists of the following components: Giodpsum Ufljfx Alxjt Chemical pre-treatment by spraying Dryer Powder coating system Powder curing oven Conveying technology (cycle process) Electrical control system

Condition: new, Year of construction: 2026, Starter Packages Powder Coating Starter sets or individually designed packages for starting your own business in surface technology, e.g. for coating alloy wheels: The package includes two sample configurations for entering powder coating or expanding an existing business. Our focus is on customized consulting tailored to the customer’s budget and requirements. Modifications and special requests are standard with us. Proven, robust and low-maintenance technology is at the center of our offer. Set 1: - Powder curing oven, internal dimensions 2,000 x 1,900 x 2,000 mm - 150 mm thick mineral wool wall insulation for energy-efficient and cost-saving operation - 36 kW thermal output for rapid heat-up time - Oil, gas, or electric heating options - 6,000 m³/h recirculating air (2.2 kW) for efficient heat transfer to workpieces - Up to 220°C - Powder coating booth (open spray booth) Powder booth dimensions: - Width: 2,100 mm - Depth: 2,000 mm - Height: 2,200 mm Gedpfxsbqk Nbo Alxjit - Fan: 6,000 m³/h, electric motor 3.0 kW for a clean working environment - Filters: 4 units, ø 325x600, cartridge type with interval-controlled self-cleaning - Secondary filtration via pocket filters - Powder coating system Wagner, manual system “Sprint 2 B” - Latest model from premium manufacturer Wagner for optimal coating results (other brands available upon request) - Corona manual gun - PEM-C4 Ergo - EPG-Sprint control unit - Powder feed system with Fluid Crown ST 550/10 - Powder injector PI-F1 - Equipment trolley with vibrating table Set 2: - Powder curing oven, internal dimensions 1,500 x 1,200 x 1,750 mm - 150 mm thick mineral wool wall insulation for energy-efficient and cost-saving operation - 14 kW thermal output for rapid heat-up time - Electric heating - 2,600 m³/h recirculating air (1.1 kW) for efficient heat transfer to workpieces - Up to 220°C - Powder coating booth (open spray booth) Powder booth dimensions: - Width: 1,200 mm - Depth: 1,100 mm - Height: 2,380 mm - Fan: 2,500 m³/h, electric motor 1.1 kW for a clean working environment - Filters: 2 units, ø 325x600, cartridge type with interval-controlled self-cleaning - Secondary filtration via pocket filters - Powder coating system Wagner, manual system “Sprint 2 B” - Latest model from premium manufacturer Wagner for optimal coating results (other brands available upon request) - Corona manual gun - PEM-C4 Ergo - EPG-Sprint control unit - Powder feed system with Fluid Crown ST 550/10 - Powder injector PI-F1 - Equipment trolley with vibrating table

Condition: new, Year of construction: 2026, functionality: fully functional, CONVEYOR BELT TUNNEL WASHING MACHINE - The components to be clean are carried on a continuos moving stainless steel belt conveyor or a stop and go pallet conveyor. The design transfer time/speed and the tunnel dimensions are design in accordance to customer’s cycle time and production need. The synergy between chemical, thermal and mechanicals actions, enable to create an accurate and high efficient washing removing all contaminants from the components with excellent cleaning results. Gisdpfewdfnzex Alxet The tunnel can be easily inspected thanks to doors installed along the tunnel in correspondence with each active station, the pumping system and filtering devices through stainless steel spray manifolds achieve maximum treatment accuracy and efficiency with stainless steel nozzles of suitable capacity. The spray pressure is controlled by pressure gauges and in regulated by ball valves.

Condition: good (used), Year of construction: 2018, functionality: fully functional, Gema Year of manufacture: 2018 Equipped with 6 automatic guns, 2 manual spray guns Max. pass-through dimensions: L x H x W, 3m x 2m x 1.1m Magic Compact BA04 Color change system Magic Compact BA4 OptiCenter OC2 Powder coating device OptiMatic AS06-8P Lifting equipment ZA7-23 Mono-cyclone 24,000 [Nm3/h] from Therma Afterfilter exhaust air volume 24,000 [Nm3/h] STS fire suppression system Caldan Overhead conveyor system Power & Free by Caldan Year of manufacture: 2018 Approx. 120 linear meters, with 12 product carrier trolleys, each 3 meters Custom built by Protaurus Gas-heated curing oven by Protaurus Year of manufacture: 2018 Giedpfxjy Al T Ie Alxot Weishaupt burner type WG40N/1-A, 500 kW output Complete with control system and accessories Without insulation material, oven casing needs to be overhauled Complete system by Gema and Caldan professionally packed Professional reassembly by Gema and Caldan prepared Layout attached Transportation costs, reassembly, and commissioning to be borne by the buyer

Condition: good (used), Compact coating line - batter dip, pre dust, batter enrober, crumber - all 400mm in to 350mm wide fryer. Has come from a small factory which was set up in 2020 and closed this week 25th March 2026. The factory was producing small products like pasta and chillies filled with cream cheese which was then coated and fried. Video to be added shortly. Gsdpfsyxfmyox Alxeit All other machinery also available including Vemag multi head filler and several blast freezers.

Condition: as good as new (ex-display), Year of construction: 2021, Direct from closed meat-free factory which opened in 2021. All machinery in near new condition and from 2021 and 2022. Very low running hours. Can be sold as whole line. Priced for end users only. New cost from GEA £1.66M Godpfxsyvau Ej Alxoit