Used Traversen Und Rahmen Verschiedene for sale (5,638)

Condition: good (used), Just beams for sale: Meta 2700*100 mm 2400 kg/level 10 EUR/piece HLF 3300*140 mm 3200 kg/level 12 EUR/piece Hilo (new type) 3100*100 mm 2000 kg/level 11 EUR/piece Dexion P90 3600*100 mm 1400 kg/level Dexion P90 Silverline 2700*125 mm 2400 kg/level If you require racking or accessories in other configurations or designs, please do not hesitate to contact us. We offer a comprehensive range of new and used racking systems and accessories, and will gladly support you with your planning. Further accessories available, for example: Frames, corner and impact protection, load-through safety bars, chipboard panels, mesh shelves, rear mesh panels, depth bars. Shipping: Please enquire about shipping costs, specifying your postcode and location, as well as the desired quantity. Additional services: Planning, racking assembly/disassembly, purchasing/sales. Tsdpfx Aheq Tpk Iemec Technical data, information, and prices are subject to change and errors. Intermediate sale reserved!

Condition: excellent (used), functionality: fully functional, Swivel spindle milling machine KÖLLE F 45 in very good condition; this machine comes from an assembly company and has been idle for the last few years, as it was no longer needed. Everything functions perfectly. All bearings and guides are in good condition; the machine runs very smoothly. Year of manufacture: 1990 with control panel on top Both fence jaws on the milling fence can be adjusted in depth, with fine adjustment and scale, allowing for planing work, e.g., on a gluing profile. The entire milling fence can also be adjusted in depth using a handwheel and a leadscrew, enabling very precise and fast adjustments. with AIGNER integral fence with spindle locking lever Chips can be removed very effectively with 2 extraction ports, 125 mm on the milling fence and 100 mm on the machine table. with 30 mm spindle, which can be swiveled steplessly from -5 to 45°; the spindle is swiveled electrically with a very precise display; fine adjustment can be made manually with a handwheel. The height adjustment is also electric, and a handwheel is also available for fine adjustment. with right/left rotation We will personally deliver and demonstrate the machine anywhere in Germany for €220.00, so you have no risk when purchasing; shipping to Austria and the rest of the EU is also possible upon request. Tedjzt Ai Espfx Ahmec with a large table opening of 375 mm, which can be reduced by using various rings (this allows for the use of cutters with a very large diameter, and you can also safely mill with small cutters). with 3000, 4000, 5000, 6000, 8000 and 10000 rpm the table is made of heavily ribbed cast iron with 30 mm spindle in the machine; another spindle can also be installed very robust and durable design; the machine was built for heavy-duty milling operations and is suitable for all milling applications. optimal power transmission through belt drive with instruction manual with 3-roller feed system HOL HER, type ET 117 the feed system has right/left rotation and 8 speeds; the feed rollers are individually mounted and are all in new condition. the machine table is 1000 mm deep and 1200 mm wide; it has an extendable support table 1200 mm long. the machine is ready for immediate use. 380 V, 4700 and 5700 W due to the 2 speeds with all necessary safety devices, motor brake, and emergency stop switch; the machine is approved by the German Wood Trade Association (Holz-BG) and has the GS safety mark. the machine weighs approximately 1000 kg with motor protection switch against overload professional-grade machine, not a hardware store reject optimal, simple, fast, and safe operation

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, load capacity per storage section: 2,050 kg, total length: 158,200 mm, total height: 4,000 mm, clearance between the columns: 2,700 mm, shelf height: 4,000 mm, number of shelf rows: 7, clear span: 2,700 mm, load capacity: 4,100 kg, frame height: 4,000 mm, load per truss pair (max.): 2,050 kg, Pallet racking system: 7 x double rows, each with 4 bays Tsdpfjzlccpjx Ahmjc 4 m high, each with 2 beam levels (clear span 2700) Scope of supply: 70 frames, 4 m high (RM4011) 280 floor anchors 70 spacers for double rows 224 beams, 2.7 m long, 0.09 m high (TR27094) 14 load capacity signs Delivery free to construction site Frames are bolted, not pre-assembled Freight / Delivery: - max. 20 working days after payment receipt - free to construction site / assembly location - unloading from the truck is carried out by the buyer using their own lifting equipment - deliveries are made throughout the Federal Republic of Germany; - excluding islands! Deliveries to EU countries are subject to individual agreement.

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, machine/vehicle number: Div, 1 set of load beams, trunnions, hooks, grippers, and load beams including 3 heavy-duty roller carriages/transport wagons, 250x80cm various manufacturers such as Tiger, DoLast, Tigrip, etc. Only sold as a complete set! Tjdpfx Ahszv H I Djmec Very good condition, see pictures. Item location is 75053 Gondelsheim. See pictures. Shipping via freight forwarder or collection only by prior appointment.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, load capacity per storage section: 3,050 kg, total length: 45,600 mm, total height: 3,500 mm, shelf height: 3,500 mm, number of shelf rows: 8, load capacity: 9,150 kg, frame height: 3,500 mm, frame width: 1,100 mm, load per truss pair (max.): 3,000 kg, shelf length: 45,600 mm, 8 double-bay pallet racks (M35112711-3) each 5.7 m long, 3.5 m high, 1.1 m deep, each with 2 bays, 2.7 m wide, Bdjbp Up Ejy Sxfvo Umsd each with 3 crossbar levels, shelf load capacity 3000 kg. - 24 frames (RM3511 - RAL5019) - 48 base plates, shims, screws - 96 floor anchors (ZZBA1210) - 96 individual crossbars (T2711 - RAL2008) - 8 load capacity signs (BSMcP) Frames are screwed together, not pre-assembled. Freight / Delivery: - max. 20 working days after receipt of payment Tjdpfsziigijx Ahmsc - delivered free to the construction site / assembly location - unloading from the truck is carried out by the buyer with their own lifting equipment - deliveries are made to the entire territory of the Federal Republic of Germany; excluding islands! Deliveries to EU countries are made according to individual agreements.

Year of construction: 2020, operating hours: 1,000 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 19/00XXX, Probat G45 Retro / Kirsch and Mausser Professional Coffee Roasting System – Complete System (Like New, 1,000 Hours) Price: 139,000 EUR net (negotiable, plus VAT) Condition & History: • Operating Hours: Approx. 1,000 hours (like new, excellent condition). • Design: G45 Retro system, rebuilt in 2019/2020 by Kirsch & Mausser, featuring a cast-iron design and complete, modern peripherals. • Availability: Ready for immediate pickup. Equipment (6 items included): Item 1: Probat G45 Retro Roasting Machine • Batch Size: 25 - 55 kg • Gas Type: Natural gas or propane (230/400 V, 50 Hz) • Separate drives for roasting drum, agitator in the cooler, and cooling fan (simultaneous roasting and cooling possible). • Closed housing with large maintenance openings, manual handwheel for airflow regulation (drum interior/jacket, aroma, external). • Cooling sieve with a second outlet, roasting fans directly on the machine, large cyclone with chaff collection container, and connection for manual fire extinguishing water supply. • Atmospheric burner with increased output (145 kW), continuously adjustable via a potentiometer on the control panel, including all safety and monitoring devices (solenoid valves, flame and gas pressure monitoring, pressure regulator). • Complete thermocouple equipment (production, roasting air, roasting exhaust air, hot air supply in the rear wall) with separate connections for temperature recording systems (e.g., Cropster). • Manual control on the control panel with digital display for temperatures and roasting times, as well as a frequency converter for the roasting fan. Item 2: Frequency Converter for Drum Operation • Continuously adjustable roasting drum speed (manually or via recipe). • Individual speed monitors and live display on the touchscreen. Item 3: Semiautomatic Control System with Touchscreen • Freely positionable control panel with touchscreen. • Readability and automatic regulation of supply air temperature and roasting fan performance via recipes. • Parameter changes can be made at any time during the roasting process. • Additional potentiometers for independent control of burner, roasting, and cooling fans. • Pneumatic operation of the green coffee feed and the outlet flap in the drum lid. Item 4: Green Coffee Transport • Hopper for up to 60 kg of green coffee. • Conveying fan, conveying pipe with bends and clamps, and closed machine hopper. Todjz Eah Hopfx Ahmsc Item 5: High Suction De-stoner • Hopper at the cooling sieve outlet, riser pipe with sight glass. • Collection container with impact plate to prevent coffee breakage, connection to the cooling fan. • Air flap for regulating the rising speed, hand slide at the outlet. • Frequency converter for the de-stoner fan with potentiometer on the frame. Item 6: Drum Vacuum Measurement • Pressure sensor in the pipeline between the roaster and the system with direct display on the touchscreen. Terms & Conditions: • Location: Luxembourg. • Communication: Please submit inquiries exclusively in writing via the platform/email. No phone calls. • Legal: Commercial B2B sale with exclusion of any warranty, liability for defects, and right of return. The system is sold in its current condition. Disassembly and transport are the responsibility of the buyer.

Condition: used, machine/vehicle number: 3781, mileage: 105,247 km, power: 205 kW (278.72 HP), first registration: 12/2005, fuel type: diesel, empty load weight: 12,545 kg, overall weight: 14,200 kg, tire size: 445/70 r24, axle configuration: 4x4, color: orange, driver cabin: day cab, gearing type: semi-automatic, emission class: euro3, operating hours: 4,606 h, operation weight: 37,300 kg, Equipment: ABS, all wheel drive, cable winch, crane, trailer coupling, Truck MB Axor 1828 with MKG HLK225HP loading crane Technical data: First registration: 12/2005 Mileage (read): 105,247 km Operating hours (read): 4,606 Power: 205 kW / 279 hp Unladen weight: 12,545 kg Permissible total weight: 14,200 kg Trailer load: 24,000 kg Differential locks Overall length: 6,500 mm Platform dimensions: L x W front: 1,330 x 2,470 mm rear: 1,640 x 2,470 mm Tsdsgi T Suopfx Ahmoc MKG HLK225HP loading crane with remote control Load capacities: 2.50 m - 7,150 kg 6.50 m - 2,620 kg 10.40 m - 1,440 kg 14.30 m - 980 kg 16.25 m - 860 kg Well-maintained vehicle. With its all-wheel drive and agricultural tires, it is also suitable for rough terrain. Due to its compact design with an overall length of 6.50 m, it can be easily maneuvered on tight construction sites. The vehicle has two loading platforms. This means that the crane is not mounted directly behind the cab. This enables better weight distribution, improves stability during crane operation, and allows work to be carried out even over the cab. The axles can be completely locked by means of the differential locks, as with the Unimog. A hydraulic frame winch with a winding device is installed. This offer is subject to change; errors and omissions excepted.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, load capacity per storage section: 1,500 kg, total length: 34,000 mm, total height: 4,500 mm, shelf height: 4,500 mm, number of shelf rows: 3, load capacity: 13,500 kg, pallet spaces: 117 euro pallets, frame height: 4,500 mm, frame width: 1,100 mm, load per truss pair (max.): 4,500 kg, shelf length: 34,000 mm, support length: 2,700 mm, HEAVY DUTY PALLET RACKS 3 rows of pallet racks Each 11.3 m long, 4.5 m high, 1.1 m deep, Each with 4 bays, 2.7 m wide, Shelf load: 4,500 kg! Tsdpfx Aezkb Hdjhmsc Bay load: 13,500 kg! - 15 frames (RH4511) RAL5019 - 30 base plates, shims, fastening materials - 60 floor anchors (ZZBA1210) - 54 single beams (T27155!) RAL2008 - 3 load capacity signs (BSMcP) Frames bolted, not pre-assembled Freight / Delivery: - Max. 26 working days after payment received - Delivery to construction site / installation site included - Unloading from truck to be carried out by purchaser with own lifting equipment. - Deliveries to all areas of the Federal Republic of Germany, except islands! Deliveries to EU countries are possible by individual arrangement.

Condition: new, Year of construction: 2026, machine/vehicle number: EAN0729389556525, load capacity per storage section: 3,000 kg, total length: 44,800 mm, total height: 4,500 mm, clearance between the columns: 3,600 mm, shelf height: 4,500 mm, number of shelf rows: 4, clear span: 3,600 mm, frame height: 4,500 mm, frame width: 1,100 mm, load per truss pair (max.): 3,000 kg, shelf length: 44,800 mm, support length: 3,600 mm, 4 rows of pallet racking (M45113615-3) each 11.2 m long, 4.5 m high, 1.1 m deep, each with 3 bays, 3.6 m wide, each with 3 beam levels, shelf load 3000 kg. - 16 frames (RM4511 - RAL5019) - 32 base plates, shims, screws - 64 floor anchors (ZZBA1210) - 72 single beams, 3.6 m long (T3615 - RAL2008) - 4 load capacity signs (BSMcP) Frames are bolted together, not pre-assembled. Freight / Delivery: - max. 20 working days after payment receipt - delivery to construction site / assembly location - unloading from the truck is carried out by the buyer using their own lifting equipment - deliveries are made to the entire territory of the Federal Republic of Germany; Tjdpfxszg Am Ds Ahmsc excluding islands! Deliveries to EU countries are subject to individual agreement.

Year of construction: 1992, condition: used, functionality: fully functional, machine/vehicle number: 029.700, Painting/drying booth from Luft- und Trockentechnik GmbH, type KSP 6-BT, manufactured in 1992. The system is suitable for painting and drying workpieces and features an integrated exhaust/extraction system. Technical data: Todpfsz D Evyjx Ahmjc Manufacturer: Luft- und Trockentechnik GmbH Type: KSP 6-BT Year of manufacture: 1992 Manufacturer's number: 029.700 Usable volume: approx. 72 m³ Total volume: approx. 81 m³ Minimum exhaust air volume flow: 1,440 m³/h Maximum permissible oven temperature: 90 °C Maximum solvent quantity: 4,302 g/oven load The painting booth has dimensions of 6 x 4 meters. The system includes an exhaust duct with extraction via the roof. In addition, a suspension/transport system is located in the ceiling area, to which workpieces or painting racks can be attached and moved through the work area. Dismantling will be carried out by the buyer.

Condition: used, Year of construction: 2022, operating hours: 360 h, functionality: fully functional, machine/vehicle number: 521080, total height: 3,780 mm, total length: 10,800 mm, total width: 5,160 mm, volume flow: 27,000 m³/h, type of input current: AC, inner dimension height: 3,000 mm, inner dimension length: 10,000 mm, inner dimension width: 5,000 mm, input voltage: 400 V, space requirement height: 3,780 mm, space requirement length: 10,800 mm, Equipment: cabin, documentation/manual, emergency stop, lighting, DURST combined painting and drying system D-LTA 30/30-ü-natural gas – Year of manufacture 2022 For sale is a high-quality combined painting and drying system from the manufacturer DURST, type D-LTA 30/30-ü-natural gas, year of manufacture 2022. The system is in very good and well-maintained condition and is suitable for the professional processing of both conventional and water-based paints. It can be used flexibly in spray and drying operations and features a powerful supply and exhaust air system, natural gas heating, heat recovery, and a modern PLC and frequency inverter control system. Technical highlights and features: • Manufacturer: DURST Lackier- und Trocknungsanlagen GmbH Tjdszubtlepfx Ahmec • Type: D-LTA 30/30-ü-natural gas • Year of manufacture: 2022 • Design: combined painting and drying booth • Booth internal dimensions: approx. 10,000 × 5,000 × 3,000 mm • Booth external dimensions: approx. 10,800 × 5,160 × 3,080–3,780 mm • Air flow rate: approx. 27,000 m³/h for both supply and exhaust air • Motor power of ventilation: 2 × 11 kW • Total electrical connection: approx. 25 kW • Heating power: up to approx. 250 kW • Heating: direct gas surface burner, natural gas • Drying temperature: up to approx. 70 °C • Air changes: approx. 180 times • Air velocity: approx. 0.50 m/s • Heat recovery via cross-flow heat exchanger • Manufacturer's specification for heat recovery: approx. 47 % efficiency on average per year, up to approx. 80 % recovery factor under optimal conditions • DURST EcoTronic system with frequency-controlled fan control • Operating modes including spray operation, partial load operation, stand-by operation, and hall heating operation • HPS heating program control for efficient drying, especially for water-based paints • PLC control with frequency inverters and monitoring devices • Remote maintenance module • LED ceiling lighting, Ex-Zone 2 • Illumination level approx. 1,090 Lux • Rear extraction wall with paint mist separator • Pre- and post-filtration of the supply and exhaust air • Partial filter ceiling with fine dust filtration • Sectional door and two partially glazed emergency exit doors • Insulated, double-walled booth housing with 80 mm mineral wool panels In spray operation, the system operates in fresh air/exhaust air mode. The drawn-in fresh air is filtered and heated via the gas surface burner. The exhaust air is passed through the paint mist separator and post-filtration. In drying operation, the system operates primarily in recirculation mode with a fresh air proportion of approx. 10 %. The integrated HPS control system enables energy-efficient and uniform drying and is particularly interesting for processing modern water-based paints. Another significant advantage is the integrated heat recovery system, which allows a considerable amount of the heat contained in the exhaust air to be fed back into the process. The system dates from 2022 and is in very good condition. Due to the generous booth dimensions, the high air flow rate and the extensive control and energy technology, it is ideally suited for industrial and commercial painting applications. Further technical documents and documentation for the system are available and can be provided upon request.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, load capacity per storage section: 2,000 kg, total length: 253,000 mm, total height: 7,500 mm, clearance between the columns: 2,700 mm, shelf height: 7,500 mm, number of shelf rows: 10, frame height: 7,500 mm, load per truss pair (max.): 2,000 kg, shelf length: 25,300 mm, support length: 2,700 mm, 10 rows of pallet racking, including 4 double rows and 2 single rows (10 x M75112711-4) each 25.3 m long, 7.5 m high, 1.1 m deep, each with 9 bays, 2.7 m wide, each with 4 beam levels, load capacity 2000 kg. - 100 frames (RM7511 - RAL5019) - 200 base plates, shims, screws - 400 floor anchors (ZZBA1210) - 720 single beams (T27114 - RAL2008) - 2 end-of-aisle protectors / impact protectors (ZRS40901) - 4 side protectors (ZFL4090D) - 120 spacers / connectors for double rows (ZAbh20) - 10 load capacity signs (BSMcP) Frames are bolted, not pre-assembled. Tedpfx Aozxwrljhmjc Freight / Delivery: - max. 20 working days after payment receipt - delivered free to the construction site / assembly location - unloading from the truck is carried out by the buyer using their own lifting equipment - deliveries are made to all areas of the Federal Republic of Germany; excluding islands! Deliveries to EU countries are subject to individual agreement.

Condition: new, Year of construction: 2026, machine/vehicle number: EAN0729389556525, load capacity per storage section: 3,000 kg, total length: 44,800 mm, total height: 4,500 mm, clearance between the columns: 3,600 mm, shelf height: 4,500 mm, number of shelf rows: 4, clear span: 3,600 mm, frame height: 4,500 mm, frame width: 1,100 mm, load per truss pair (max.): 3,000 kg, shelf length: 44,800 mm, support length: 3,600 mm, 4 rows of pallet racking (M45113615-3) each 11.3 m long, 4.5 m high, 1.1 m deep, each with 3 bays, 3.6 m wide, each with 3 crossbeam levels, load capacity per bay 3000 kg. - 16 frames (RM4511 - RAL5019) - 32 base plates, shims, screws Tedpezpfa Sefx Ahmoc - 64 floor anchors (ZZBA1210) - 72 single crossbeams, 3.6 m long (T3615 - RAL2008) - 4 load capacity signs (BSMcP) Frames are bolted together, not pre-assembled. Freight/Delivery: - max. 20 working days after receipt of payment - delivery free to construction site/assembly location - unloading from the truck is carried out by the buyer using their own lifting equipment - deliveries are made throughout the Federal Republic of Germany; excluding islands! Deliveries to EU countries are possible by individual agreement.

Condition: used, Year of construction: 2016, operating hours: 15,000 h, functionality: fully functional, machine/vehicle number: kom 4892, Set of dryer equipment, including: Loading bunker Oversize vibrating screen Chain conveyor to dryer Belt dryer Chain conveyors from dryer Todpfx Asxa Drhohmjc Vibration separator

Condition: new, Year of construction: 2026, machine/vehicle number: EAN0729389556525, load capacity per storage section: 3,000 kg, total length: 44,800 mm, total height: 4,500 mm, load per truss pair (max.): 3,000 kg, number of shelf rows: 4, frame height: 4,500 mm, clear span: 3,600 mm, clearance between the columns: 3,600 mm, frame width: 1,100 mm, shelf height: 4,500 mm, shelf length: 44,800 mm, support length: 3,600 mm, 4 rows of pallet racking (M45113615-3) each 11.3 m long, 4.5 m high, 1.1 m deep, each with 3 bays, 3.6 m wide, each with 3 crossbeam levels, load capacity per bay 3000 kg. - 16 frames (RM4511 - RAL5019) - 32 base plates, shims, screws - 64 floor anchors (ZZBA1210) - 72 single crossbeams, 3.6 m long (T3615 - RAL2008) Tedpfszvunrox Ahmec - 4 load capacity signs (BSMcP) Frames are bolted together, not pre-assembled. Freight/Delivery: - max. 20 working days after receipt of payment - delivery free to construction site/assembly location - unloading from the truck is carried out by the buyer using their own lifting equipment - deliveries are made throughout the Federal Republic of Germany; excluding islands! Deliveries to EU countries are possible by individual agreement.

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: K 300712/595, overall weight: 2,900 kg, total width: 125 mm, total length: 330 mm, total height: 225 mm, Todpfoz Dcaisx Ahmoc

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 30785, type of input current: AC, total width: 750 mm, total length: 1,700 mm, total height: 1,300 mm, overall weight: 90 kg, input voltage: 230 V, input frequency: 50 Hz, input current: 16 A, Equipment: documentation/manual, For sale is a fully functional ViscoTec dispensing unit, type ViscoDos III. The unit was in productive use until recently and is in good used condition. The dispensing unit is suitable for conveying and precisely dispensing highly viscous media such as adhesives, sealants, silicones, resins, and pastes. It is made entirely of stainless steel and is mounted on a mobile base with an integrated control system. It was used for food applications. Technical data: Manufacturer: ViscoTec Pumpen- u. Dosiertechnik GmbH Type: Dispensing unit with ViscoDos III Year of manufacture: 2016 Serial number: 30785 Tjdpfx Ahjz Hyimjmsc Power supply: 230 V / 50 Hz Connected load: 16 A Weight: approx. 90 kg Design: Stainless steel, mobile Condition: Used, fully functional until decommissioning Inspection possible by arrangement. Assistance with loading can be provided.

Condition: used, Year of construction: 1980, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,100 mm, spindle speed (max.): 1,200 rpm, spindle speed (min.): 15 rpm, spindle mount: MK 5, throat depth: 2,000 mm, quill diameter: 76 mm, quill stroke: 600 mm, type of input current: three-phase, total length: 4,040 mm, total height: 2,900 mm, table width: 900 mm, input voltage: 380 V, total width: 2,800 mm, table length: 1,200 mm, drilling depth: 600 mm, rotational speed (max.): 1,200 rpm, rotational speed (min.): 15 rpm, spindle diameter: 80 mm, feed length W-axis: 600 mm, rapid traverse X-axis: 3,450 m/min, rapid traverse Y-axis: 3,450 m/min, rapid traverse Z-axis: 3,450 m/min, Equipment: documentation/manual, SORALUCE ALF 80 A Universal Drilling and Milling Machine Year of manufacture: 1980 · Heidenhain ND70 · Extensive original documentation For sale is a robust and versatile SORALUCE ALF 80 A universal drilling and milling machine, manufactured in 1980. The machine is suitable for demanding drilling, reaming, and milling operations, as well as for machining larger and heavier workpieces. Due to its solid construction, the ALF 80 is particularly suitable for classic machine, plant, steel, and special machine construction. The machine features a Heidenhain ND70 position indicator. Extensive original operating instructions and technical documentation from SORALUCE are available. Equipment / Accessories In addition to the machine, the offer includes an extensive accessory package, so that the SORALUCE ALF 80 A can be used for various machining tasks. Among other things, the following are included: Large, solid clamping angle for vertical or angular clamping and machining of workpieces Extensive selection of tool holders and tool attachments Various clamping devices Additional existing tools and machine accessories Heidenhain ND70 position indicator Original SORALUCE operating instructions Technical documentation Foundation and installation documents The large clamping angle can be seen in the machine photos. Thanks to the extensive accessories, the machine offers a significant practical added value compared to a machine without the corresponding tool attachments and clamping devices. The exact scope of the accessories can be viewed during an inspection. On request, further detailed photos of the accessories can be provided. Technical data Manufacturer: SORALUCE Model: ALF 80 A Machine type: Universal drilling and milling machine Year of manufacture: 1980 Machine no.: 55/5-110 Travel distances / Working area Cross travel: 1,600 mm Longitudinal travel of table: 1,100 mm Longitudinal travel of table without steady rest: 1,400 mm Vertical travel: 1,200 mm Longitudinal travel of drilling spindle: 600 mm Largest distance between spindle and steady rest: 2,000 mm Work table Useful area: 900 × 1,200 mm Spindle Drilling spindle diameter: 76.2 mm Spindle diameter for milling: 128.57 mm Tool holder: Morse taper MK 5 Number of speed stages: 24 Speed range: 15–1,200 rpm Feeds Drilling spindle / Faceplate: 9 feed stages 0.036–2 mm/rev Spindle box / Slide: 9 feed stages 0.072–4 mm/rev Rapid traverse: Drilling spindle / Faceplate: 600–1,725 mm/min Spindle box / Slide: 1,200–3,450 mm/min Faceplate Design: detachable Diameter: 430 mm Largest face turning diameter: 750 mm Adjustment of face turning slide: 150 mm Motorization Main brake motor: 10 hp Coolant motor: 0.25 hp Dimensions and weight Overall length: 4,040 mm Overall width: 2,800 mm Overall height: 2,900 mm Net weight: approx. 9,200 kg Tsdpfx Aszl Rqhohmsc Equipment / Accessories Heidenhain ND70 position indicator Original SORALUCE operating instructions Technical documentation Foundation and installation documents Available accessories and tools for the drilling machine, by arrangement Due to its solid, heavy construction, the machine is of particular interest to companies that are looking for a reliable conventional drilling and milling machine for large workpieces. Inspection possible by appointment. We will gladly provide further photos, technical documents and detailed information.

Condition: good (used), We have approximately 40 m of various pallet conveyors for sale in total. Brands include Kettner, Krones, Schäfer, etc. Tedpfxepgnqhe Ahmsc Among them are roller conveyors, chain segments, rotary segments, corner transfers, transfer carts, and empty pallet magazines. Price on request, starting from €580 per segment.

Condition: like new (used), Year of construction: 2019, operating hours: 20 h, functionality: fully functional, machine/vehicle number: 65487, Equipment: documentation/manual, For sale is an Innomatec LTC-802 M Leak Test Computer in like-new condition, from our company’s inventory. The device was factory-calibrated by Innomatec in 2026 and will be sold including a current factory calibration certificate. According to the manufacturer, there are currently no restrictions regarding service or spare parts availability. Manufacturer: Innomatec Mess und Schnellanschluss Model: LTC - 802 M Year of manufacture: 2019 Condition: like new Category ID: 404 Type ID: 2224 Type: Measuring system Technical data Manufacturer: Innomatec Model: LTC-802 M Year of manufacture: 2019 Mass flow method Pressure range: 0.05 to 5 bar Single-channel leak test device Configurable testing system Suitable for large-volume components Factory calibration 2026 Scope of delivery: Innomatec LTC-802 M Original power supply Accessories as shown in the photos Factory calibration certificate Operating instructions (as shown in the photos) Application areas Automotive industry Medical technology Industrial manufacturing Quality assurance Leak testing Automated production systems Condition Like-new condition Factory-calibrated by Innomatec (2026) Completely cleaned Ready for immediate use Note: The photos of the current factory calibration certificate are part of the listing and can be found in the attached images. Sale is made by a company with an invoice. Inspection possible by appointment. Tsdpozltyfsfx Ahmec If you have any questions or need more information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2014, power: 28 kW (38.07 HP), number of chambers: 5, Capacity: The oven has six independently controlled baking compartments (baking trays or levels). This allows different products to be baked simultaneously with different temperatures and baking times. Operation: Each of the six compartments is equipped with its own, individually programmable digital control panel on the left side (as shown in image_0.png). Each panel has a display and buttons for setting time, temperature, and possibly other parameters. Construction: The oven is robustly constructed with a black metal housing and an illuminated hood bearing the inscription "WACHTEL INFRA." On the right side of each level, there is a lever for operating the door or steam inlet of that specific compartment. Tedpszbr U Iefx Ahmec Interior: Each compartment has a flat baking surface, possibly lined with stone or a metal baking sheet, as shown in image_2.png.

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: K 220808/309b, overall weight: 2,850 kg, total width: 125 mm, total length: 330 mm, total height: 125 mm, Tjdpfxez Db Tue Ahmoc

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, load capacity per storage section: 3,250 kg, total length: 137,000 mm, load per truss pair (max.): 3,250 kg, number of shelf rows: 10, frame height: 5,000 mm, clear span: 3,300 mm, frame width: 1,100 mm, shelf height: 5,000 mm, shelf length: 137,000 mm, support length: 3,300 mm, 2 single-row pallet racks + 4 double-row pallet racks, each 13.7 m long, 5 m high, 1.1 m deep. Each with 4 bays, 3.3 m wide, and 3 beam levels per bay. Shelf load capacity: 3,250 kg per level. Tedpfezrbxcox Ahmsc Scope of delivery: - 50 frames (RM5011 - RAL5019), including base plates, shims, and fastening materials - 40 spacers/connectors for double rows (ZAbh20) - 200 floor anchors (ZZBA1210) - 240 individual beams (T33135 - RAL2008) - 10 impact guards/collision protectors (ZRS40901) - 10 load capacity signs (BSMcP) Frames are bolted, not pre-assembled. Shipping / Delivery: - Maximum 20 working days after receipt of payment - Delivered free to construction/installation site - Unloading from truck to be carried out by the buyer using their own forklift - Deliveries are made throughout the entire territory of the Federal Republic of Germany (except islands); deliveries to EU countries are subject to individual agreement.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, total length: 137,000 mm, load per truss pair (max.): 3,250 kg, number of shelf rows: 10, frame height: 5,000 mm, clear span: 3,300 mm, frame width: 1,100 mm, shelf height: 5,000 mm, shelf length: 137,000 mm, support length: 3,300 mm, 2 single-row pallet racks + 4 double-row pallet racks, each 13.7 m long, 5 m high, 1.1 m deep. Each with 4 bays, 3.3 m wide, and 3 beam levels per bay. Shelf load capacity: 3,250 kg per level. Scope of delivery: - 50 frames (RM5011 - RAL5019), including base plates, shims, and fastening materials - 40 spacers/connectors for double rows (ZAbh20) - 200 floor anchors (ZZBA1210) - 240 individual beams (T33135 - RAL2008) Tsdpjzwbz Usfx Ahmsc - 10 impact guards/collision protectors (ZRS40901) - 10 load capacity signs (BSMcP) Frames are bolted, not pre-assembled. Shipping / Delivery: - Maximum 20 working days after receipt of payment - Delivered free to construction/installation site - Unloading from truck to be carried out by the buyer using their own forklift - Deliveries are made throughout the entire territory of the Federal Republic of Germany (except islands); deliveries to EU countries are subject to individual agreement.

Condition: reconditioned (used), Year of construction: 1980, functionality: fully functional, For sale: a drilling and milling machine from Alzmetall. Type: Plus 3 DG. Inspection and test run possible at any time. Tedpfx Aozk U Dpohmjc Forklift available for loading.