Used Triangle Brand** Js16 2-16 Mm for sale (113,678)

Condition: good (used), Year of construction: 2013, functionality: fully functional, arm reach: 1,611 mm, For sale is a Kuka industrial robot, model KR 16-2. - 1x pedestal for the robot, height approximately 30cm - 1x KRC4 control cabinet - 1x KCP4 operator panel, 00-168-334 - Connection cables Djdpfszzaclsx Adrscn - Shipping is possible for an additional charge.

Year of construction: 2019, condition: excellent (used), functionality: fully functional, 120 mm cold feed vacuum rubber extruder (20D) suitable for rubber production (EPDM, SBR, NBR). Siemens motor, 0-50 r/min. Total power 155 kW. Dcedpfoxnpx Nox Adren

Condition: new, Year of construction: 2022, Manufacturer: RBC Robotics GmbH Type: Automation Brose oKMV Year of manufacture: 2022 Machine no.: 20380 Length: approx. 20,000 mm Width: approx. 1,500 mm Height: approx. 3,000 mm Number of robots: 5 Power supply: 3 × 400 V + N + PE / 60 Hz Power: 57 kW Max. fuse: 100 A Control voltage: 24 V DC Mains system: TN-S Max. short circuit current: 10 kA Pneumatic operating pressure: 6 bar Dcedpfxozuy Ibo Adren Weight: 25 t Equipment: Production part collection and transfer stations KUKA industrial robots: Manufacturer: KUKA Series: CYBERTECH-2 Model: KR 16 R2010-2 / SEL Number of robots: 5 Year of production: 2022 Number of axes: 6 Payload: 16 kg Reach: 2013 mm Weight: 296 kg

Condition: excellent (used), Year of construction: 2012, Technical Data: Working width: 2600 mm Bending capacity: 20.0 mm Pre-bending: 16.0 mm Top roll diameter: 330 mm Middle roll diameter: 300 mm Side rolls diameter: 240 mm Conical bending device via tilting of both side rolls Mobile control panel with digital display Motor power: 11 kW CE mark Dcsdpfjx Ii Hvex Adren Dimensions (L x W x H): approx. 5800 x 2300 x 1900 mm Weight: approx. 11 t Additional equipment: Upper bending aid The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: refurbished (used), Year of construction: 2014, operating hours: 8,021 h, functionality: fully functional, machine/vehicle number: 689658, overall weight: 235 kg, load capacity: 16 kg, arm reach: 1,610 mm, This is a KUKA KR 16-2 R1610 industrial robot with KRC4 control system. Year of manufacture: 2014. Dedpfx Adozvxvtorscn This robot has been completely overhauled! The control system includes the following options: BoardPackage EthernetKRL LoadDataDetermination Profinet KRC-Nexxt RemoteService SafeOperation UserTech

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, total length: 16,240 mm, load capacity: 5,000 kg, working height: 6,000 mm, lifting height: 6,000 mm, Equipment: documentation/manual, 2 Abus overhead cranes – Type: single-girder – Capacity: 5,000 kg – Lifting height: 6 m – Year of manufacture: 2012 – Hoist type: wire rope hoist – FEM/ISO hoist classification: 2m/M5 Dimensions – Span: 16,240 mm center-to-center – Installation height: 560 mm – Wheelset width including bumpers: 3,210 mm – Wheelbase: 2,700 mm – Suitable for crane rail: 50×30 mm – Dead weight: 3,690 kg Speeds – Hoisting: 5/0.8 m/min (2 speeds) – Trolley travel: 20/5 m/min (2 speeds) – Crane travel: 40/10 m/min (2 speeds) Features – Control: wired push-button panel with load display – Crane manual available: yes – Last maintenance: May 2026 – Condition: in good condition, dismantled but operational – Dismantled: no; October 2026 – 2 units available Steel structure including floor slabs and column-mounted slewing crane – Length: 32.5 m (approx.) – Year of construction: 2012 – Condition: in good condition – Dismantled: no; October 2026 Dimensions – Total length: 32.5 m (approx.) – Width (center-to-center) of crane runway: 16,240 mm – Total width: 16.7 m (approx.) – Distance from floor to top of 50×30 mm beam: 6,200 mm (approx.) – Column spacing: to be confirmed – Crane runway: HEA 260 – Columns: HEA 260 – Crane beam: 50×30 mm Includes – 16 x HEA 260 columns, height approx. 5,914 mm – Cross-braces – Floor slab measuring approx. 4.5 x 16 m – Floor slab measuring approx. 4.0 x 6 m Dedpfx Aez Eruljdrocn – Column-mounted slewing crane with a lifting capacity of 1.6 tonnes

Condition: used, Year of construction: 1990, External/Internal Cylindrical Grinding TARDUGNO RIBON type MODULE 2A Between points: 1000 mm Centre height: 180 mm Workpiece holder spindle CM4 Dedpfoz I Az Uex Adrocn Maxi grinding diameter: Ø 360 mm Workpiece holder rotation: from 35 to 310 RPM Year of construction: 1990 Tilting table - 9° / + 6° Grinding wheel dimensions: Ø 406 mm x thickness 60 mm Scale on table X Spindle speed: 1500 - 1730 RPM Grindstone motor: 5,5 CV Hydraulic tailstock CM3 Auto wheel advance Internal grinding spindle: Max speed 20000 RPM Maxi boring: from 14 to 75 mm Lubricant tank+ paper filter Diamond system Tilting grindstone holder trolley Supplied with grinding wheels + steadies Voltage: 380 V Dimensions (L x W x H): 3800 x 2000 x 2200 mm Weight: approx 3,2 T

Condition: like new (used), Year of construction: 2022, Track width: 6 m Year of manufacture: 2022 Dcedpfezzbddjx Adrsn Serial number: 1306065 Payload: 16 kg Reach: 2013 mm Weight: 296 kg Number of axes: 6 Control system: KR C4

Condition: used, Year of construction: 2014, Measuring machine Zeiss CMM Pro T2 advance 16/21, year of manufacture 2014 – in very good condition • Standard numerical control panel • Base plate dimensions: Length: 4,000 mm Width: 2,000 mm Height: 640 mm Dcodpfxsw D R Nqe Adrsn Total system height approx. 4,500 mm • Measuring range: X-axis: 3,200 mm Y-axis: 1,600 mm Z-axis: 2,100 mm • Permissible workpiece weight: approx. 5,000 kg Software: Zeiss Caligo BASIS CNC, Zeiss Caligo QS-STAT • Length measurement deviation according to ISO 10360-2: MPE-E = (27 + L/80)μm

Condition: like new (used), Year of construction: 2022, The robot is designed for multi-segment roadways, with a minimum travel distance of 6 meters and a total possible travel distance of 20 meters, at a height of 3 meters, using special columns. It is also possible to install the robot on the floor, but this requires minor modifications. Dodpfozzbctsx Adrjcn Year of manufacture: 2022 Serial number: 1306061 Payload: 16 kg Weight: 296 kg Reach: 2013 mm Control system: KR C4

Condition: like new (used), Year of construction: 2022, Year of manufacture: 2022 Dodpfx Adjzzbd Rorjcn Serial number: 1306064 Payload: 16 kg Reach: 2013 mm Axes: 6 Controller: KUKA KRC4

Condition: used, Year of construction: 2014, Measuring machine Zeiss CMM Pro T2 advance 16/21, year of manufacture 2014 – in very good condition • Standard numerical control panel • Base plate dimensions: Length: 4,000 mm Width: 2,000 mm Height: 640 mm Total system height approx. 4,500 mm • Measuring range: X-axis: 3,200 mm Y-axis: 1,600 mm Z-axis: 2,100 mm • Permissible workpiece weight: approx. 5,000 kg Software: Zeiss Caligo BASIS CNC, Zeiss Caligo QS-STAT Djdoxuq Tuepfx Adrjcn • Length measurement deviation according to ISO 10360-2: MPE-E = (27 + L/80)μm

Condition: like new (used), Year of construction: 2022, Robot installed on a two-segment track, with each segment 6 meters long, allowing a total travel distance of 12 meters, at a height of 3 meters, on special columns. Installation of the track on the floor is also possible, but requires minor modifications. Manufacturing date: 2022 Serial number: 1396062 Weight: 296 kg Payload: 16 kg Dsdpfx Aezzbbvjdrocn Reach: 2013 mm Control system: KR C4

Year of construction: 2023, condition: ready for operation (used), A Herzog two-head square braiding machine is available. Number of carriers 1/2: 12/16, tandem carrier configuration: 8, horn gear diameter: 150mm/200mm, speed 1/2: 175rpm/131rpm, bobbin diameter: 55mm, bobbin height: 130mm, bobbin capacity: 265cm³. Including 2x change gears, 2x double gears, 28x bobbins, 28x thread tension springs, 2x take-off discs, 6x wooden drums, 8x carrier tubes, 2x braiding plates and one carrier guard. The machine has only been operated for a few thousand running meters and is therefore in very good, near-new condition. Documentation available. An on-site inspection is possible. Dedpfx Aezqfx Dsdrscn

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, Equipment: type plate available, device for dosing pastes, jams, meat, cheese, etc. into aluminum and plastic cups, including an aluminum lid sealing machine and a date coder Dcjdpfxsw E H A As Adrsn

Condition: ready for operation (used), Year of construction: 2015, overall weight: 235 kg, load capacity: 16 kg, arm reach: 1,611 mm, number of axes: 6, This 6-axis KUKA PWG + PSD-B-Schiene / KR 16-2 was manufactured in 2015. It features a robot range of 1611 mm and a load capacity of 16 kg, making it suitable for various applications. The machine includes a complete soundproofing enclosure, exhaust ducting, and an integrated KUKA smartPAD teach pendant. If you are looking to get high-quality robotic brushing capabilities, consider the KUKA PWG + PSD-B-Schiene / KR 16-2 machine we have for sale. Contact us for further details. - Machine Description: Robot Brushing Machine 1 PSD-B-Rail- System Voltage: 400V / 230V- System Frequency: 50 Hz- Max Current Consumption: 12 A- Max Compressed Air Pressure: 6 bar- Robot Weight: 235 KG- Robot Controller: KUKA KRC4- Included Components: Complete soundproofing/safety enclosure, exhaust ducting, integrated KUKA smartPAD teach pendant, specialized rotary brushing tool attachment Djdpozfp S Rofx Adrscn

Condition: used, machine/vehicle number: 04 897, consisting of: Rinser 15 Nozzles Vacuum filler 16 Filling valves Dcodpfxez Ibffo Adron Screw capper 3 heads 22 mm screw cap

Condition: excellent (used), Here we offer you a Kuka robot with a control unit. Kuka robot VKR 16-2 R1610 Control unit VKRC4-SC5 Kuka smartPAD handheld programming device The robot comes from a school and research department. Hour meter: 226.25 hours Axis data: Range of motion: A1 ±185° A2 -185° / 65° A3 -138° / 175° A4 ±350° A5 ±130° A6 ±350° Speed at nominal load Dedpfozdiudjx Adrjcn A1 200 °/s A2 175 °/s A3 190 °/s A4 430 °/s A5 430 °/s A6 630 °/s Technical data: Maximum reach 1612 mm Maximum payload 20 kg Nominal payload 16 kg Nominal additional load carousel / swivel / arm 0 kg / 0 kg / 10 kg Positional repeatability (ISO 9283) ± 0.04 mm Number of axes 6 Mounting position: Floor; Ceiling; Wall; Any angle Mounting area 430.5 mm x 370 mm Weight approx. 245 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Technical Details: Working width: 3100 mm Maximum bending capacity: 16.0 mm Maximum pre-bending: 12.0 mm Top roll diameter: 300 mm Side roll diameter: 270 mm All three rolls powered Hardened rolls Conical bending device by tilting of both side rolls Dsdpexyvx Tefx Adrjcn Swiveling control panel with digital display Hydraulic drop end bearing Motor power: 7.5 kW Dimensions (L x W x H): approx. 5800 x 1700 x 1500 mm Net weight: approx. 8.5 tons The seller is not liable for typing or data transmission errors. The machine's appearance, technical condition, and wear correspond to its age; used machines are sold without any warranty.

Condition: used, clamping head, deadbolt collet, collet sleeves, collet, tool holder, tool holder, milling holder, milling tool, clamping sleeves Dcodpfx Adsu S Tbzsren -Clamping sleeves: length 80 mm, 5 pieces -Sizes: Ø 15/16/20/25/30 mm -Price/Delivery: complete -Transport dimensions: 140/90/H80 mm -Weight: 1.8 kg

Condition: excellent (used), Year of construction: 2008, load capacity: 16 kg, arm reach: 1,611 mm, controller manufacturer: KUKA, controller model: KRC2 ED05, The KR16 is designed for a rated payload of 16 kg in order to optimize the dynamic performance of the robot. Main Applications: - Welding - Dispensing - Additive Manufacturing Model: KR16 Condition: Used & Tested Year: 2008 (more options are also available) Controller Cabinet: KRC2 ED05 Included: Manipulator + KRC2 ED05 Control Cabin + All Wire Sets + Teach Pendant - FULL SET Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 500 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman. (Source: KUKA's Website)" Dcodpfx Adew Idvkjron

Year of construction: 2005, condition: excellent (used), 16 stations design: cassette Djdpjh I Nizefx Adrocn shaft Ø: 45 mm strip width: 300 mm strip thickness: 2 mm

Year of construction: 1997, condition: good (used), Machine info: EVG Polybend stirrup machine PBE 2-16 come with 2 Pay offs - build in 1997 comes with a complete new control unit - original EVG Single wire: 6 –16 mm Twin strand: 6 –12 mm Voltage 400 Volt 50 Hz 30 Kw Production year: Dcjdpon Ut A Sofx Adrsn 1997

Condition: new, Year of construction: 2023, pressure 6,2 t chamfer lenght 285 mm mm distance between columns 230 mm dayligth 215 mm throat 70 mm stroke 100 mm working feed 9,8 mm/sec return speed 50 mm/sec quantity of oil 10 l Control DELEM DA 41T total power requirement 0,7 kW weight of the machine ca. 250 kg dimensions 900 x 1300 x 550 mm Demonstration Machine â?¢ Basic C-frame design â?¢ Compact benchtop model â?¢ Ideal for prototypes and small production runs Dsdpfxezlulce Adrscn â?¢ Very short setup time â?¢ Functionally simple â?¢ Wide range of applications â?¢ Low noise level â?¢ Low power consumption â?¢ Easy to operate Includes optional equipment: - DELEM DA 41T CNC control

Condition: like new (used), Year of construction: 2001, Technical data: Working width: 2050 mm Max. bending capacity for normal steel St40: 4.0 mm Max. edge bending for normal steel St40: 2.0 mm CNC control: MG Diameter of top roller: 140 mm Diameter of side bottom rollers: 105 mm Diameter of central bottom roller: 130 mm Dedeza D U Dopfx Adrjcn Conical bending device Working height: 800 mm Mobile control panel Hydraulic folding bearings CE marking Motor power: 3 kW Dimensions (length x width x height): approx. 3400 x 1200 x 1200 mm Weight: approx. 2.5 tons Condition: Very good condition, very little use The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.